[NETFILTER]: Explicitly initialize .priority in arptable_filter

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>

[NETFILTER]: remove arpt_(un)register_target indirection macros

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>

[NETFILTER]: remove arpt_target indirection macro

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>

[NETFILTER]: remove arpt_table indirection macro

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>

[NETFILTER]: annotate rest of nf_nat_* with const

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>

[NETFILTER]: annotate rest of nf_conntrack_* with const

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>

[NETFILTER]: annotate {arp,ip,ip6,x}tables with const

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>

[NETFILTER]: annotate xtables targets with const and remove casts

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>

[NETFILTER]: xt_sctp: simplify xt_sctp.h

The use of xt_sctp.h flagged up -Wshadow warnings in userspace, which
prompted me to look at it and clean it up. Basic operations have been
directly replaced by library calls (memcpy, memset is both available
in the kernel and userspace, and usually faster than a self-made
loop). The is_set and is_clear functions now use a processing time
shortcut, too.

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>

[NETFILTER]: Use non-deprecated __RW_LOCK_UNLOCKED macro

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Patrick McHardy <kaber@trash.net>

[NETFILTER]: bridge netfilter: use non-deprecated __RW_LOCK_UNLOCKED macro.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Patrick McHardy <kaber@trash.net>

[NETFILTER]: ip_tables: per-netns FILTER/MANGLE/RAW tables for real

Commit 9335f047fe61587ec82ff12fbb1220bcfdd32006 aka
"[NETFILTER]: ip_tables: per-netns FILTER, MANGLE, RAW"
added per-netns _view_ of iptables rules. They were shown to user, but
ignored by filtering code. Now that it's possible to at least ping loopback,
per-netns tables can affect filtering decisions.

netns is taken in case of
PRE_ROUTING, LOCAL_IN -- from in device,
POST_ROUTING, LOCAL_OUT -- from out device,
FORWARD -- from in device which should be equal to out device's netns.
   This code is relatively new, so BUG_ON was plugged.

Wrappers were added to a) keep code the same from CONFIG_NET_NS=n users
(overwhelming majority), b) consolidate code in one place -- similar
changes will be done in ipv6 and arp netfilter code.

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Patrick McHardy <kaber@trash.net>

[NETFILTER]: {ip,ip6}t_LOG: print MARK value in log output

Dump the mark value in log messages similar to nfnetlink_log. This
is useful for debugging complex setups where marks are used for
routing or traffic classification.

Signed-off-by: Patrick McHardy <kaber@trash.net>

[NETFILTER]: nf_conntrack: less hairy ifdefs around proc and sysctl

Patch splits creation of /proc/net/nf_conntrack, /proc/net/stat/nf_conntrack
and net.netfilter hierarchy into their own functions with dummy ones
if PROC_FS or SYSCTL is not set. Also, remove dead "ret = 0" write
while I'm at it.

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Patrick McHardy <kaber@trash.net>

[SKB]: __skb_queue_tail = __skb_insert before

This expresses __skb_queue_tail() in terms of __skb_insert(),
using __skb_insert_before() as auxiliary function.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SKB]: __skb_append = __skb_queue_after

This expresses __skb_append in terms of __skb_queue_after, exploiting that

  __skb_append(old, new, list) = __skb_queue_after(list, old, new).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SKB]: __skb_queue_after(prev) = __skb_insert(prev, prev->next)

By reordering, __skb_queue_after() is expressed in terms of __skb_insert().

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SKB]: __skb_dequeue = skb_peek + __skb_unlink

By rearranging the order of declarations, __skb_dequeue() is expressed in terms of

 * skb_peek() and
 * __skb_unlink(),

thus in effect mirroring the analogue implementation of __skb_dequeue_tail().

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6] MROUTE: Add stats in multicast routing module method ip6_mr_forward().

This patches adds a call to increment IPSTATS_MIB_OUTFORWDATAGRAMS
when forwarding the packet in ip6_mr_forward() in the IPv6 multicast
routing module (net/ipv6/ip6mr.c).

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Sink IPv6 menuoptions into its own submenu

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: Share common code-paths for sticky socket options.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6] MROUTE: Do not call ipv6_find_idev() directly.

Since NETDEV_REGISTER notifier chain is responsible for creating
inet6_dev{}, we do not need to call ipv6_find_idev() directly here.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS][DCCPV6]: Make per-net socket lookup.

The inet6_lookup family of functions requires a net to lookup
a socket in, so give a proper one to them.

No more things to do for dccpv6, since routing is OK and the
ipv4-like transport layer filtering is not done for ipv6.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS][DCCPV6]: Actually create ctl socket on each net and use it.

Move the call to inet_ctl_sock_create to init callback (and
inet_ctl_sock_destroy to exit one) and use proper ctl sock
in dccp_v6_ctl_send_reset.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS][DCCPV6]: Move the dccp_v6_ctl_sk on the struct net.

And replace all its usage with init_net's socket.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS][DCCPV6]: Add dummy per-net operations.

They will be responsible for ctl socket initialization, but
currently they are void.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS][DCCPV6]: Don't pass NULL to ip6_dst_lookup.

This call uses the sock to get the net to lookup the routing
in. With CONFIG_NET_NS this code will OOPS, since the sk ptr
is NULL.

After looking inside the ip6_dst_lookup and drawing the analogy
with respective ipv6 code, it seems, that the dccp ctl socket
is a good candidate for the first argument.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS][DCCPV4]: Enable DCCPv4 in net namespaces.

This enables sockets creation with IPPROTO_DCCP and enables
the ip level to pass DCCP packets to the DCCP level.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS][DCCPV4]: Make per-net socket lookup.

The inet_lookup family of functions requires a net to lookup
a socket in, so give a proper one to them.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS][DCCPV4]: Use proper net to route the reset packet.

The dccp_v4_route_skb used in dccp_v4_ctl_send_reset, currently
works with init_net's routing tables - fix it.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS][DCCPV4]: Actually create ctl socket on each net and use it.

Move the call to inet_ctl_sock_create to init callback (and
inet_ctl_sock_destroy to exit one) and use proper ctl sock
in dccp_v4_ctl_send_reset.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS][DCCPV4]: Move the dccp_v4_ctl_sk on the struct net.

And replace all its usage with init_net's socket.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS][DCCPV4]: Add dummy per-net operations.

They will be responsible for ctl socket initialization, but
currently they are void.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS]: Add an empty netns_dccp structure on struct net.

According to the overall struct net design, it will be
filled with DCCP-related members.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Remove owner from tcp_seq_afinfo.

Move it to tcp_seq_afinfo->seq_fops as should be.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Place file operations directly into tcp_seq_afinfo.

No need to have separate never-used variable.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Cleanup /proc/tcp[6] creation/removal.

Replace seq_open with seq_open_net and remove tcp_seq_release
completely.  seq_release_net will do this job just fine.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Move seq_ops from tcp_iter_state to tcp_seq_afinfo.

No need to create seq_operations for each instance of 'netstat'.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: No need to check afinfo != NULL in tcp_proc_(un)register.

tcp_proc_register/tcp_proc_unregister are called with a static pointer only.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Replace struct net on tcp_iter_state with seq_net_private.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[ATM] drivers/atm/horizon.c: stop inlining largish static functions

drivers/atm/horizon.c has unusually large number
of static inline functions - 36.

I looked through them. Most of them seems to be small enough,
but a few are big, others are using udelay or busy loop,
and as such are better not be inlined.

This patch removes "inline" from these static functions
(regardless of number of callsites - gcc nowadays auto-inlines
statics with one callsite).

Size difference for 32bit x86:
   text    data     bss     dec     hex filename
   8201     180       6    8387    20c3 linux-2.6-ALLYES/drivers/atm/horizon.o
   7840     180       6    8026    1f5a linux-2.6.inline-ALLYES/drivers/atm/horizon.o

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[INET]: sk_reuse is valbool

sk_reuse is declared as "unsigned char", but is set as type valbool in net/core/sock.c.
There is no other place in net/ where sk->sk_reuse is set to a value > 1, so the test
"sk_reuse > 1" can not be true.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TIPC]: Improve socket time conversions

This patch modifies TIPC's socket code to use standard kernel
routines to handle time conversions between jiffies and ms.
This ensures proper operation even when HZ isn't 1000.

Acknowledgements to Eric Sesterhenn <snakebyte@gmx.de> for
identifying this issue and proposing a solution.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TIPC]: Remove redundant socket wait queue initialization

This patch eliminates re-initialization of the standard socket
wait queue used for sleeping in TIPC's socket creation code.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-2.6.26-misc-20080412b' of git://git.linux-ipv6.org/gitroot/yoshfuji/linux-2.6-dev

LSM: Make the Labeled IPsec hooks more stack friendly

The xfrm_get_policy() and xfrm_add_pol_expire() put some rather large structs
on the stack to work around the LSM API.  This patch attempts to fix that
problem by changing the LSM API to require only the relevant "security"
pointers instead of the entire SPD entry; we do this for all of the
security_xfrm_policy*() functions to keep things consistent.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

NetLabel: Allow passing the LSM domain as a shared pointer

Smack doesn't have the need to create a private copy of the LSM "domain" when
setting NetLabel security attributes like SELinux, however, the current
NetLabel code requires a private copy of the LSM "domain".  This patches fixes
that by letting the LSM determine how it wants to pass the domain value.

 * NETLBL_SECATTR_DOMAIN_CPY
   The current behavior, NetLabel assumes that the domain value is a copy and
   frees it when done

 * NETLBL_SECATTR_DOMAIN
   New, Smack-friendly behavior, NetLabel assumes that the domain value is a
   reference to a string managed by the LSM and does not free it when done

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[AF_UNIX]: Use SEQ_START_TOKEN

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: New sctp mailing list

Add a new sctp mailing list linux-sctp@vger.kernel.org.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SCTP]: Remove an unused parameter from sctp_cmd_hb_timer_update

The 'asoc' parameter to sctp_cmd_hb_timer_update() is unused, and
we can remove it.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SCTP]: "list_for_each()" -> "list_for_each_entry()" where appropriate.

Replacing (almost) all invocations of list_for_each() with
list_for_each_entry() tightens up the code and allows for the deletion
of numerous list iterator variables that are no longer necessary.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SCTP]: Correct /proc/net/assocs formatting error

Recently I posted a patch to add some informational items to
/proc/net/sctp/assocs.  All the information is correct, but because
of how the seqfile show operation is laid out, some of the formatting
is backwards.  This patch corrects that formatting, so that the new
information appears at the end of each line, rather than in the middle.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: Fix IPV6_RECVERR for connected raw sockets.

Based on patch from Dmitry Butskoy <buc@odusz.so-cdu.ru>.

Closes: 10437
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPv6]: Change IPv6 unspecified destination address to ::1 for raw and un-connected sockets

This patch fixes a difference between IPv4 and IPv6 when sending packets
to the unspecified address (either 0.0.0.0 or ::) when using raw or
un-connected UDP sockets.  There are two cases where IPv6 either fails
to send anything, or sends with the destination address set to ::.  For
example:

--> ping -c1 0.0.0.0
PING 0.0.0.0 (127.0.0.1) 56(84) bytes of data.
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.032 ms

--> ping6 -c1 ::
PING ::(::) 56 data bytes
ping: sendmsg: Invalid argument

Doing a sendto("0.0.0.0") reveals:

10:55:01.495090 IP localhost.32780 > localhost.7639: UDP, length 100

Doing a sendto("::") reveals:

10:56:13.262478 IP6 fe80::217:8ff:fe7d:4718.32779 > ::.7639: UDP, length 100

If you issue a connect() first in the UDP case, it will be sent to ::1,
similar to what happens with TCP.

This restores the BSD-ism.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6] MROUTE: Adjust IPV6 multicast routing module to use mroute6 header declarations.

- This patch adjusts IPv6 multicast routing module, net/ipv6/ip6mr.c,
to use mroute6 header definitions instead of mroute.
 (MFC6_LINES instead of MFC_LINES, MAXMIFS instead of MAXVIFS, mifi_t
instead of vifi_t.)

- In addition, inclusion of some headers was removed as it is not needed.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6]: Check length of int/boolean optval provided by user in setsockopt().

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6]: Check length of optval provided by user in setsockopt().

Check length of setsockopt's optval, which provided by user, before copy it
from user space.
For POSIX compliant, return -EINVAL for setsockopt of short lengths.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6] MIP6: Use our standard definitions for paddings.

MIP6_OPT_PAD_X are actually for paddings in destination
option header.  Replace them with our standard IPV6_TLV_PADX.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6]: Use in6addr_any where appropriate.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6]: Define constants for link-local multicast addresses.

- Define link-local all-node / all-router multicast addresses.
- Remove ipv6_addr_all_nodes() and ipv6_addr_all_routers().

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6]: Make address arguments const.

- net/ipv6/addrconf.c:
ipv6_get_ifaddr(), ipv6_dev_get_saddr()
- net/ipv6/mcast.c:
ipv6_sock_mc_join(), ipv6_sock_mc_drop(),
inet6_mc_check(),
ipv6_dev_mc_inc(), __ipv6_dev_mc_dec(), ipv6_dev_mc_dec(),
ipv6_chk_mcast_addr()
- net/ipv6/route.c:
rt6_lookup(), icmp6_dst_alloc()
- net/ipv6/ip6_output.c:
ip6_nd_hdr()
- net/ipv6/ndisc.c:
ndisc_send_ns(), ndisc_send_rs(), ndisc_send_redirect(),
ndisc_get_neigh(), __ndisc_send()

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6] ADDRCONF: Uninline ipv6_isatap_eui64().

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6] ADDRCONF: Uninline ipv6_addr_hash().

The function is only used in net/ipv6/addrconf.c.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6]: Use XOR and OR rather than mutiple ands for ipv6 address comparisons.

ipv6_addr_equal(), ipv6_addr_v4mapped(),
ipv6_addr_is_ll_all_{nodes,routers}(),
ipv6_masked_addr_cmp()

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6]: Use ipv6_addr_equal() instead of !ipv6_addr_cmp().

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6] FIB_RULE: Sparse: fib6_rules_cleanup() is of void.

| net/ipv6/fib6_rules.c:319:2: warning: returning void-valued expression

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6]: Sparse: Reuse previous delaration where appropriate.

| net/ipv6/ipv6_sockglue.c:162:16: warning: symbol 'net' shadows an earlier one
| net/ipv6/ipv6_sockglue.c:111:13: originally declared here
| net/ipv6/ipv6_sockglue.c:175:16: warning: symbol 'net' shadows an earlier one
| net/ipv6/ipv6_sockglue.c:111:13: originally declared here
| net/ipv6/ip6mr.c:1241:10: warning: symbol 'ret' shadows an earlier one
| net/ipv6/ip6mr.c:1163:6: originally declared here

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6] SIT: Sparse: Use NULL pointer instead of 0.

| net/ipv6/sit.c:382:42: warning: Using plain integer as NULL pointer

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6]: Kill several warnings without CONFIG_IPV6_MROUTE.

Pointed out by Andrew Morton <akpm@linux-foundation.org>.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

IPV4: use xor rather than multiple ands for route compare

The comparison in ip_route_input is a hot path, by recoding the C
"and" as bit operations, fewer conditional branches get generated
so the code should be faster. Maybe someday Gcc will be smart
enough to do this?

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SCTP]: Use snmp_mib_{init,free}().

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Use snmp_mib_{init,free}().

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: fib_trie leaf free optimization

Avoid unneeded test in the case where object to be freed
has to be a leaf. Don't need to use the generic tnode_free()
function, instead just setup leaf to be freed.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: fib_trie remove unused argument

The trie pointer is passed down to flush_list and flush_leaf
but never used.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[ATM]: Use SEQ_START_TOKEN

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[Syncookies]: Add support for TCP options via timestamps.

Allow the use of SACK and window scaling when syncookies are used
and the client supports tcp timestamps. Options are encoded into
the timestamp sent in the syn-ack and restored from the timestamp
echo when the ack is received.

Based on earlier work by Glenn Griffin.
This patch avoids increasing the size of structs by encoding TCP
options into the least significant bits of the timestamp and
by not using any 'timestamp offset'.

The downside is that the timestamp sent in the packet after the synack
will increase by several seconds.

changes since v1:
 don't duplicate timestamp echo decoding function, put it into ipv4/syncookie.c
 and have ipv6/syncookies.c use it.
 Feedback from Glenn Griffin: fix line indented with spaces, kill redundant if ()

Reviewed-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPV4: fib_trie use vmalloc for large tnodes

Use vmalloc rather than alloc_pages to avoid wasting memory.
The problem is that tnode structure has a power of 2 sized array,
plus a header. So the current code wastes almost half the memory
allocated because it always needs the next bigger size to hold
that small header.

This is similar to an earlier patch by Eric, but instead of a list
and lock, I used a workqueue to handle the fact that vfree can't
be done in interrupt context.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: Remove unused declarations in include/net/ip6_route.h.

1) Standlaone ip6_null_entry is no longer needed as it is replaced by
   the ip6_null_entry member of ipv6 (instance of struct netns_ipv6) in
   struct net (as a result of Network Namespaces patches).

2) These 3 methods from this same header are not defined anywhere:
   ip6_rt_addr_add(), ip6_rt_addr_del(), rt6_sndmsg()

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

iucv: Delay bus registration until core is ready.

If we register the iucv bus after the infrastructure is ready,
userspace can start relying on it when it receives the uevent
for the bus.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

iucv: get rid of in_atomic() use.

This BUG_ON is not needed, since all (debug) checks are also done
in smp_call_function() which gets called by this function.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_iucv: Use non-deprecated __RW_LOCK_UNLOCKED macro.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SKFILTER]: Add SKF_ADF_NLATTR instruction

SKF_ADF_NLATTR searches for a netlink attribute, which avoids manually
parsing and walking attributes. It takes the offset at which to start
searching in the 'A' register and the attribute type in the 'X' register
and returns the offset in the 'A' register. When the attribute is not
found it returns zero.

A top-level attribute can be located using a filter like this
(example for nfnetlink, using struct nfgenmsg):

...
{
/* A = offset of first attribute */
.code = BPF_LD | BPF_IMM,
.k = sizeof(struct nlmsghdr) + sizeof(struct nfgenmsg)
},
{
/* X = CTA_PROTOINFO */
.code = BPF_LDX | BPF_IMM,
.k = CTA_PROTOINFO,
},
{
/* A = netlink attribute offset */
.code = BPF_LD | BPF_B | BPF_ABS,
.k = SKF_AD_OFF + SKF_AD_NLATTR
},
{
/* Exit if not found */
.code   = BPF_JMP | BPF_JEQ | BPF_K,
.k = 0,
.jt = <error>
},
...

A nested attribute below the CTA_PROTOINFO attribute would then
be parsed like this:

...
{
/* A += sizeof(struct nlattr) */
.code = BPF_ALU | BPF_ADD | BPF_K,
.k = sizeof(struct nlattr),
},
{
/* X = CTA_PROTOINFO_TCP */
.code = BPF_LDX | BPF_IMM,
.k = CTA_PROTOINFO_TCP,
},
{
/* A = netlink attribute offset */
.code = BPF_LD | BPF_B | BPF_ABS,
.k = SKF_AD_OFF + SKF_AD_NLATTR
},
...

The data of an attribute can be loaded into 'A' like this:

...
{
/* X = A (attribute offset) */
.code = BPF_MISC | BPF_TAX,
},
{
/* A = skb->data[X + k] */
.code  = BPF_LD | BPF_B | BPF_IND,
.k = sizeof(struct nlattr),
},
...

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6] Remove three method declarations in include/net/ndisc.h.

This patch removes two unused method declarations in
include/net/ndisc.h: ndisc_forwarding_on(void) and
ndisc_forwarding_off(void);

Also igmp6_cleanup(void) appears twice in this header, so one
igmp6_cleanup(void) declaration is removed.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SCTP: Remove useless assignment from __sctp_rcv_lookup_endpoint

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SCTP: fix wrong debug counting of bind_bucket

Should not count it if the allocation of the object
is failed.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SCTP: fix wrong debug counting of datamsg

Should not count it if the allocation of this object
failed.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPV4: route rekey timer can be deferrable

No urgency on the rehash interval timer, so mark it as deferrable.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPV4: route use jhash3

Since route hash is a triple, use jhash_3words rather doing the mixing
directly. This should be as fast and give better distribution.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPV4: route inline changes

Don't mark functions that are large as inline, let compiler decide.
Also, use inline rather than __inline__.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

socket: sk_filter deinline

The sk_filter function is too big to be inlined. This saves 2296 bytes
of text on allyesconfig.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

socket: sk_filter minor cleanups

Some minor style cleanups:
  * Move __KERNEL__ definitions to one place in filter.h
  * Use const for sk_filter_len
  * Line wrapping
  * Put EXPORT_SYMBOL next to function definition

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac80211: fix key debugfs default_key link

The default_key symlink points to the key index rather than
they key counter, fix it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/p54/net2280.h: silence checkpatch.pl

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

p54: move to separate directory

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: rename files

This patch renames all mac80211 files (except ieee80211_i.h) to get rid
of the useless ieee80211_ prefix.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: fix key vs. sta locking problems

Up to now, key manipulation is supposed to run under RTNL to
avoid concurrent manipulations and also allow the set_key()
hardware callback to sleep. This is not feasible because STA
structs are rcu-protected and thus a lot of operations there
cannot take the RTNL. Also, key references are rcu-protected
so we cannot do things atomically.

This patch changes key locking completely:
 * key operations are now atomic
 * hardware crypto offload is enabled and disabled from
   a workqueue, due to that key freeing is also delayed
 * debugfs code is also run from a workqueue
 * keys reference STAs (and vice versa!) so during STA
   unlink the STAs key reference is removed but not the
   keys STA reference, to avoid races key todo work is
   run before STA destruction.
 * fewer STA operations now need the RTNL which was
   required due to key operations

This fixes the locking problems lockdep pointed out and also
makes things more light-weight because the rtnl isn't required
as much.

Note that the key todo lock/key mutex are global locks, this
is not required, of course, they could be per-hardware instead.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: fix sta-info pinning

When a STA is supposed to be unlinked but is pinned, it still needs
to be unlinked from all structures. Only at the end of the unlink
process should we check for pin status and invalidate the callers
reference if it is pinned. Move the pin status check down.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: fix defined but not used

These two symbols are used only in ifdeffed function. Move them to that
section too.
net/mac80211/sta_info.c:387: warning: `__sta_info_pin' defined but not used
net/mac80211/sta_info.c:397: warning: `__sta_info_unpin' defined but not used

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Michael Wu <flamingice@sourmilk.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

adm8211: remove commented-out code

Remove some commented-out code from adm8211.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: BA session debug prints changes

This patch contains next issues:
1 - prevents "stop BA session" multiple warnings
2 - adds debug print to stop Rx BA session flow
3 - adds EOL in one debug print

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>