[XFS] Fix signedness issues in dquot ID handling, allowing uids/gids above
MAXINT

SGI-PV: 942528
SGI-Modid: xfs-linux:xfs-kern:23828a

Signed-off-by: Nathan Scott <nathans@sgi.com>

[XFS] Add a comment about the use of XFS_SIZE_TOKEN_WANT.

SGI-PV: 936331
SGI-Modid: xfs-linux:xfs-kern:23827a

Signed-off-by: Nathan Scott <nathans@sgi.com>

[XFS] only mark buffers done when all pages are uptodate  in addition
replace PBF_NONE with an inverted PBF_DONE, so it's like all the other
flags.

SGI-PV: 942609
SGI-Modid: xfs-linux:xfs-kern:199136a

Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>

[XFS] Stack footprint reduction for xfs_swapext (used from xfs_fsr)

SGI-PV: 913332
SGI-Modid: xfs-linux:xfs-kern:198926a

Signed-off-by: Eric Sandeen <sandeen@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>

[XFS] write barrier support  Issue all log sync operations as ordered
writes.  In addition flush the disk cache on fsync if the sync cached
operation didn't sync the log to disk (this requires some additional
bookeping in the transaction and log code). If the device doesn't claim to
support barriers, the filesystem has an extern log volume or the trial
superblock write with barriers enabled failed we disable barriers and
print a warning.  We should probably fail the mount completely, but that
could lead to nasty boot failures for the root filesystem.  Not enabled by
default yet, needs more destructive testing first.

SGI-PV: 912426
SGI-Modid: xfs-linux:xfs-kern:198723a

Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>

[XFS] fix PBF_NONE handling

SGI-PV: 908809
SGI-Modid: xfs-linux:xfs-kern:198669a

Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>

[XFS] Add format checking to cmn_err and icmn_err

SGI-PV: 942243
SGI-Modid: xfs-linux:xfs-kern:198658a

Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>

[XFS] remove unused pagebuf flags

SGI-PV: 908809
SGI-Modid: xfs-linux:xfs-kern:198656a

Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>

[XFS] Make sure the threads and shaker in xfs_buf are de-initialized in
reverse startup order

SGI-PV: 942063
SGI-Modid: xfs-linux:xfs-kern:198651a

Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>

Merge git://git./linux/kernel/git/aia21/ntfs-2.6

Merge branch 'master' of /home/src/linux-2.6/

NTFS: Fix a stupid bug causing writes to non-initialized pages to segfault.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>

Don't touch USB controller IO registers when they are disabled

The USB "handoff" code is an early PCI quirk to make sure we own the USB
controller (as opposed to the BIOS/SMM).  But if the controller isn't
even enabled yet, don't try to access it.

Acked-by: Paul Mackerras <paulus@samba.org> (who had an alternate patch)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Revert "i386: move apic init in init_IRQs"

Commit f2b36db692b7ff6972320ad9839ae656a3b0ee3e causes a bootup hang on
at least one machine.  Revert for now until we understand why.  The old
code may be ugly, but it works.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Creative Audigy 2 cardbus: Add IO window wakeup magic

This adds the magic IO wakeup code for the CardBus version of the
Creative Labs Audigy 2 to the snd-emu10k1 driver.

Without the magic IO enable sequence, reading from the IO region of the
card will fail spectacularly, and the machine will hang.

My next task will be getting the driver to actually play sound without
distortion.

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
[ This is a work-in-progress, but since it avoids a total lockup
  if the emu10k module is loaded on a machine with the cardbus
  card inserted, we're better off with it than without it, even
  if sound quality is bad right now ]

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix __writeback_single_inode WARN_ON

When the inode count is zero in inode writeback, the

WARN_ON(!(inode->i_state & I_WILL_FREE));

is broken, and needs to test for either I_WILL_FREE|I_FREEING.

When the inode is in I_FREEING state, it's already out of the visibility
of the vm so it can't be freed so it doesn't require the __iget and the
generic_delete_inode path can call the sync internally to the lowlevel
fs callback during the last iput. So the inode being in I_FREEING is
also a valid condition for calling the sync with i_count == 0.

The specific stack trace is this:

  0xc00000007b8fb6e0  0xc00000000010118c  .__writeback_single_inode +0x5c
  0xc00000007b8fb6e0  0xc0000000001014dc (lr) .sync_inode +0x3c
  0xc00000007b8fb790  0xc0000000001014dc  .sync_inode +0x3c
  0xc00000007b8fb820  0xc0000000001a5020  .ext2_sync_inode +0x64
  0xc00000007b8fb8f0  0xc0000000001a65b4  .ext2_truncate +0x3f8
  0xc00000007b8fba40  0xc0000000001a6940  .ext2_delete_inode +0xdc
  0xc00000007b8fbac0  0xc0000000000f7a5c  .generic_delete_inode +0x124
  0xc00000007b8fbb50  0xc0000000000f5fe0  .iput +0xb8
  0xc00000007b8fbbe0  0xc0000000000e9fd4  .sys_unlink +0x2a8
  0xc00000007b8fbd10  0xc00000000001048c  .ret_from_syscall_1 +0x0

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] revert ide-scsi highmem cleanup

Jeff Garzik <jgarzik@pobox.com> points out that this was wrong: we need to
disable local interrupts while holding KM_IRQ0 due to IRQ sharing.

And holding interrupts off during a big PIO opration is expensive, so we only
want to do that if we know the page was highmem.

So revert commit 17fd47ab4d33e764216b87006d8118fa050b4c92

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386: CONFIG_PC removal

CONFIG_PC is left-over cruft after the introduction of CONFIG_X86_PC with
the subarch split.  Remove it, and fixup the remaining users to depend on
CONFIG_X86_PC instead.

Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] noop-iosched: avoid corrupted request merging

Tejun Heo notes:

   "I'm currently debugging this.  The problem is that we are using the
    generic dispatch queue directly in the noop sched and merging is NOT
    allowed on dispatch queues but generic handling of last_merge tries
    to merge requests.  I'm still trying to verify this, so I'll be back
    with results soon."

In the meantime, disable merging for noop by setting REQ_NOMERGE in
elevator_noop_add_request().

Eventually, we should add a noop_list and do the dispatching like in the
other io schedulers.  Merging is still beneficial for noop (and it has
always done it).

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Fix on-the-fly switch from cfq i/o scheduler

Don't clear ->elevator_data on exit, if we are switching queues we are
overwriting the data of the new io scheduler.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge git://git./linux/kernel/git/aia21/ntfs-2.6

Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

Merge kernel.org:/home/rmk/linux-2.6-drvmodel

Manual #include fixups for clashes - there may be some unnecessary

Merge branch 'master' of /usr/src/ntfs-2.6/

Input: adbhid - fix OOPS introduced by dynalloc conversion

The problem is that adbhid[]->input is NULL, so the kernel oopses with
a null pointer dereference as soon as a key is pressed.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: lkkbd - fix debug message in lkkbd_interrupt()

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: pcspkr - fix setting name and phys for the device

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: fix input_dev registration message

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: evdev - allow querying SW state from compat ioctl

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: evdev - allow querying EV_SW bits from compat_ioctl

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

[libata] locking rewrite (== fix)

A lot of power packed into a little patch.

This change eliminates the sharing between our controller-wide spinlock
and the SCSI core's Scsi_Host lock.  As the locking in libata was
already highly compartmentalized, always referencing our own lock, and
never scsi_host::host_lock.

As a side effect, this change eliminates a deadlock from calling
scsi_finish_command() while inside our spinlock.

powerpc: import a fix from arch/ppc/mm/pgtable.c

... namely, the change to the 2-argument pte_alloc_kernel.

Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc: apply recent changes to merged code

Signed-off-by: Paul Mackerras <paulus@samba.org>

[libata] ata_tf_to_host cleanups

Integrate ata_exec() and ata_tf_to_host() into their only caller,
ata_bus_edd().

Rename ata_tf_to_host_nolock() to ata_tf_to_host().

This makes locking a bit easier to review, and may help pave the way for
future changes.

Merge ../linux-2.6 by hand

ppc: remove duplicate export of cur_cpu_spec

Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc: Fix bug arising from having multiple memory_limit variables

We had a static memory_limit in prom.c, and then another one defined
in setup_64.c and used in numa.c, which resulted in the kernel crashing
when mem=xxx was given on the command line.  This puts the declaration
in system.h and the definition in mem.c.  This also moves the
definition of tce_alloc_start/end out of setup_64.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>

Merge master.kernel.org:/home/rmk/linux-2.6-serial

Merge master.kernel.org:/home/rmk/linux-2.6-arm

Merge master.kernel.org:/home/rmk/linux-2.6-mmc

[PATCH] fat: Remove duplicate directory scanning code

This patch removes duplicate directory scanning code from fs/fat/dir.c.  The
two functions that share identical code are fat_readdirx() and
fat_search_long().  This patch also renames fat_readdirx to __fat_readdir().

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fat: remove the unneeded vfat_find() in vfat_rename()

Now, vfat_rename() is using vfat_find() for sanity check.  This removes that
sanity check, the cost of sanity check is too high.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fat: cleanup and optimization of checksum

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix missing includes

I recently picked up my older work to remove unnecessary #includes of
sched.h, starting from a patch by Dave Jones to not include sched.h
from module.h. This reduces the number of indirect includes of sched.h
by ~300. Another ~400 pointless direct includes can be removed after
this disentangling (patch to follow later).
However, quite a few indirect includes need to be fixed up for this.

In order to feed the patches through -mm with as little disturbance as
possible, I've split out the fixes I accumulated up to now (complete for
i386 and x86_64, more archs to follow later) and post them before the real
patch.  This way this large part of the patch is kept simple with only
adding #includes, and all hunks are independent of each other.  So if any
hunk rejects or gets in the way of other patches, just drop it.  My scripts
will pick it up again in the next round.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Remove duplicate code in signal.c

Combine a bit of redundant code between force_sig_info() and
force_sig_specific().

Signed-off-by: paulmck@us.ibm.com
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] remove unneeded SI_TIMER checks

This patch removes checks for ->si_code == SI_TIMER from send_signal,
specific_send_sig_info, __group_send_sig_info.

I think posix-timers.c used these functions some time ago, now it sends
signals via send_{,group_}sigqueue, so these hooks are unneeded.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cleanup the usage of SEND_SIG_xxx constants

This patch simplifies some checks for magic siginfo values.  It should not
change the behaviour in any way.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] remove hardcoded SEND_SIG_xxx constants

This patch replaces hardcoded SEND_SIG_xxx constants with
their symbolic names.

No changes in affected .o files.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hpet: hpet driver cleanups

- Use kzalloc() instead of kmalloc + memset.
- Clean/fix some printk's.
- Use NULL for pointers instead of 0.
- Combine hpet busy searching locations into a function call.

Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hpet: use HPET physical addresses for dup. detection

- Use HPET physical address to detect duplicates, not logical addresses.
  Using logical (mapped) addresses fails to detect duplicates
  because ioremap() returns a new mapped address each time.

- iounmap() regions when duplicate/busy areas are found.

Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hpet: allow HPET FIXED_MEM32 resource type

Allow the ACPI HPET description table to use a resource type of FIXED_MEM32
for the HPET reource.  Use the fixed resoure size of 1 KB for the HPET
resource as per the HPET spec.

Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com>
Acked-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hpet: simplify initialization message

When booting, display the timer frequency in Hertz instead of as tick length
in nanoseconds.  Apart from saving a local variable, this makes the message
more easily comprehensible.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hpet: remove superfluous indirections

In the hpet_ioctl_common() function, devp->hd_hpets is already cached in the
hpetp variable, so we can use just that.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hpet: fix access to multiple HPET devices

Fix two instances where a function would access the first HPET device instead
of the current one.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hpet: fix uninitialized variable in hpet_register()

Clear the ht_opaque field in the hpet_register() function before searching for
a free timer to prevent the function from incorrectly assuming that the search
succeeded afterwards.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hpet: fix division by zero in HPET_INFO

Fix a division by zero that happened when the HPET_INFO ioctl was called
before a timer frequency had been set.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hpet: fix HPET_INFO calls from kernel space

Fix a wrong memory access in hpet_ioctl_common().  It was not possible to use
the HPET_INFO ioctl from kernel space because it always called copy_to_user().

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hpet-RTC: cache the comparator register

Reads from an HPET register require a round trip to the south bridge and are
almost as slow as PCI reads.  By caching the last value we've written to the
comparator register, we can eliminate all HPET reads from the fast path in the
emulated RTC interrupt handler.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hpet-RTC: fix timer config register accesses

Make sure that the RTC timer is in non-periodic mode; some stupid BIOS might
have initialized it to periodic mode.

Furthermore, don't set the SETVAL bit in the config register.  This wouldn't
have any effect unless the timer was in period mode (which it isn't), and then
the actual timer frequency would be half that of the desired one because
incrementing the comparator in the interrupt handler would be done after the
hardware has already incremented it itself.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hpet-RTC: disable interrupt when no longer needed

When the emulated RTC interrupt is no longer needed, we better disable it;
otherwise, we get a spurious interrupt whenever the timer has rolled over and
reaches the same comparator value.

Having a superfluous interrupt every five minutes doesn't hurt much, but it's
bad style anyway.  ;-)

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hpet: allow shared interrupts

This patch adds support for shared HPET interrupts.

The driver previously acknowledged interrupts for both edge and level
interrupts, but didn't actually allow a shared interrupt in the latter case.

We use a new per-timer flag to save whether the timer's interrupt might be
shared, and use it to do the processing required for level interrupts only if
necessary.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hpet: allow non-power-of-two frequencies

It was only the RTC hardware that restricted interrupt frequencies to a power
of two.  There is no reason to take over this restriction into the HPET
driver, so remove the offending check.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hpet: remove superfluous register reads

This patch removes several reads of a timer's config register that serve no
purpose whatsoever.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hpet: remove unused variable

The variable hpet_ntimer is never read, so remove it.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] HPET: make frequency calculations 32 bit safe

On 32-bit architectures, the multiplication in the argument for
hpet_time_div() often overflows.  In the typical case of a 14.32 MHz timer,
this happens when the desired frequency exceeds 61 Hz.

To avoid this multiplication, we can precompute and store the hardware
timer frequency, instead of the period, in the device structure, which
leaves us with a simple division when computing the number of timer ticks.

As a side effect, this also removes a theoretical bug where the timer
interpolator's frequency would be computed as a 32-bit value even if the
HPET frequency is greater than 2^32 Hz (the HPET spec allows up to 10 GHz).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hpet: disallow zero interrupt frequency

Disallow setting an interrupt frequency of zero (which would result in a
division by zero), and disallow enabling the interrupt when the frequency
hasn't yet been set (which would use an interrupt period of zero).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sparse cleanups: NULL pointers, C99 struct init.

Convert most of the remaining "Using plain integer as NULL pointer" sparse
warnings to use NULL.  (Not duplicating patches that are already in -mm,
-bird, or -kj.)

Convert isdn driver struct initializer to use C99 syntax.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] tpm-tidies

- Various whitespace fixes

- Use kzalloc()

Acked-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Infineon TPM: move infineon driver off pci_dev

Move the Infineon TPM driver off pci device and makes it a pure pnp-driver.
It includes pnp-port validation and region requesting.

Signed-off-by: Marcel Selhorst <selhorst@crypto.rub.de>
Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] tpm: move nsc driver off pci_dev

This patch changes the nsc driver from a pci driver to a platform driver.

Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] tpm: move atmel driver off pci_dev

This patch changes the atmel driver from a pci driver to a platform driver.

Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] tpm: change from pci_dev to dev power management functions

This patch is in support of moving away from the lpc bus pci_dev.  The power
management prototypes used by platform drivers is different but the
functionality remains the same.

Signed-off-by: Kylene Hall <kjhall@us.ibm.com
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] tpm: remove pci dependency

Since the tpm does not have it's own pci id we have been consuming the lpc
bus.  This is not correct and causes problems to support non lpc bus chips.
This patch removes the dependency on pci_dev from tpm.c The subsequent patches
will stop the supported chips from registering as pci drivers.

Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] tpm: add status function to allow non-lpc bus chips

This patch is in preparation of supporting chips that are not necessarily on
the lpc bus and thus are not accessed with inb's and outb's.  The patch
replaces the call to get the chip's status in the tpm.c file with a vendor
specific status function.  The patch also defines the function for each of the
current supported devices.

Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Don't set dcdbas driver to default m

It's nasty to set random drivers to default m because people who just press
enter on make oldconfig get these.  Remove the default m

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sched: hardcode non-smp set_cpus_allowed

Simplify the UP (1 CPU) implementatin of set_cpus_allowed.

The one CPU is hardcoded to be cpu 0 - so just test for that bit, and avoid
having to pick up the cpu_online_map.

Also, unexport cpu_online_map: it was only needed for set_cpus_allowed().

Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix build on nls free systems

I made a patch that detects if libintl.h (needed for nls) is present on the
host system and if it's not, it nls support is disabled by providing
dummies for the used nls functions.

This way if there is nls support on the host system the *config targets
will build according to Arnaldo Carvalho de Melo's i18n modifications, else
it just uses the original English messages.

I have also made a bug report at kernel's bugzilla:
http://bugzilla.kernel.org/show_bug.cgi?id=5501
And there is a discussion about this problem in Gentoo's bugzilla:
http://bugs.gentoo.org/show_bug.cgi?id=99810

Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] README doesn't mention bzip2 source tarball

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] lib/string.c cleanup: restore useful memmove const

A couple of (char *) casts removed in a previous cleanup patch in
lib/string.c:memmove() were actually useful, as they suppressed a couple of
warnings:

assignment discards qualifiers from pointer target type

Fix by declaring the local variable const in the first place, so casts
aren't needed to strip the const qualifier.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Error checks omitted in init_tmpfs() in mm/tiny-shmem.c

From: Hareesh Nagarajan <hnagar2@gmail.com>

Signed-off-by: Hareesh Nagarajan <hnagar2@gmail.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] __bread oops fix

If a filesystem passes an idiotic blocksize into bread(), __getblk_slow() will
warn and will return NULL.  We have a report (from Hubert Tonneau
<hubert.tonneau@fullpliant.org>) of isofs_fill_super() doing this (passing in
a silly block size) against an unplugged CDROM drive.

But a couple of __getblk_slow() callers forgot to check for the NULL bh, hence
oops.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] semaphore: Remove __MUTEX_INITIALIZER()

__MUTEX_INITIALIZER() has no users, and equates to the more commonly used
DECLARE_MUTEX(), thus making it pretty much redundant.  Remove it for good.

Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rocketport: make it work when statically linked into kernel

The driver had incorrectly wrapped module_init(rp_init) in #ifdef MODULE,
so it worked only when compiled as a module.

Tested by Wolfgang Denk with this device:

    00:0e.0 Communication controller: Comtrol Corporation RocketPort 8 port w/RJ11 connectors (rev 04)
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at 7000 [size=64]

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] posix-cpu-timers: fix overrun reporting

This change corrects an omission in posix_cpu_timer_schedule, so that it
correctly propagates the overrun calculation to where it will get reported
to the user.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RCU torture-testing kernel module

This patch is a rewrite of the one submitted on October 1st, using modules
(http://marc.theaimsgroup.com/?l=linux-kernel&m=112819093522998&w=2).

This rewrite adds a tristate CONFIG_RCU_TORTURE_TEST, which enables an
intense torture test of the RCU infratructure.  This is needed due to the
continued changes to the RCU infrastructure to accommodate dynamic ticks,
CPU hotplug, realtime, and so on.  Most of the code is in a separate file
that is compiled only if the CONFIG variable is set.  Documentation on how
to run the test and interpret the output is also included.

This code has been tested on i386 and ppc64, and an earlier version of the
code has received extensive testing on a number of architectures as part of
the PREEMPT_RT patchset.

Signed-off-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fs/attr.c: remove BUG()

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] include/linux/kernel.h:BUILD_BUG_ON(): fix a comment

Fix comment describing BUILD_BUG_ON: BUG_ON is not an assertion
(unfortunately).

Signed-off-by: Nikita Danilov <nikita@clusterfs.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] watchdog: update .owner field of struct pci_driver

This updates .owner field of struct pci_driver.

This allows SYSFS to create the symlink from the driver to the module which
provides it.

Signed-off-by: Laurent Riffard <laurent.riffard@free.fr>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] SyncLink adapters: updates .owner field of struct pci_driver

This updates .owner field of struct pci_driver.

This allows SYSFS to create the symlink from the driver to the module which
provides it.

Signed-off-by: Laurent Riffard <laurent.riffard@free.fr>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] epca: update .owner field of struct pci_driver

This updates .owner field of struct pci_driver.

This allows SYSFS to create the symlink from the driver to the module which
provides it.

Signed-off-by: Laurent Riffard <laurent.riffard@free.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix vgacon blanking

This patch fixes a long-standing vgacon bug: characters with the bright bit
set were left on the screen and not blacked out.  All I did was that I
lookuped up some examples on the net about setting the vga palette, and
added the call missing from the linux kernel, but included in all other
ones.  It works for me.

You can test this by writing something with the bright set to the
console, for example:
  echo -e "\e[1;31mhello there\e[0m"
and then wait for the console to blank itself (by default, after 10 mins
of inactivity), maybe making it faster using
  setterm -blank 1
so you only have to wait 1 minute.

Signed-off-by: Pozsar Balazs <pozsy@uhulinux.hu>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Test for sb_getblk return value

This patch adds tests for the return value of sb_getblk() in the ext2/3
filesystems.  In fs/buffer.c it is stated that the getblk() function never
fails.  However, it does can return NULL in some situations due to I/O
errors, which may lead us to NULL pointer dereferences

Signed-off-by: Glauber de Oliveira Costa <glommer@br.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix nr_unused accounting, and avoid recursing in iput with I_WILL_FREE set

  list_move(&inode->i_list, &inode_in_use);
  } else {
  list_move(&inode->i_list, &inode_unused);
+ inodes_stat.nr_unused++;
  }
  }
  wake_up_inode(inode);

Are you sure the above diff is correct? It was added somewhere between
2.6.5 and 2.6.8. I think it's wrong.

The only way I can imagine the i_count to be zero in the above path, is
that I_WILL_FREE is set.  And if I_WILL_FREE is set, then we must not
increase nr_unused.  So I believe the above change is buggy and it will
definitely overstate the number of unused inodes and it should be backed
out.

Note that __writeback_single_inode before calling __sync_single_inode, can
drop the spinlock and we can have both the dirty and locked bitflags clear
here:

spin_unlock(&inode_lock);
__wait_on_inode(inode);
iput(inode);
XXXXXXX
spin_lock(&inode_lock);
}
use inode again here

a construct like the above makes zero sense from a reference counting
standpoint.

Either we don't ever use the inode again after the iput, or the
inode_lock should be taken _before_ executing the iput (i.e. a __iput
would be required). Taking the inode_lock after iput means the iget was
useless if we keep using the inode after the iput.

So the only chance the 2.6 was safe to call __writeback_single_inode
with the i_count == 0, is that I_WILL_FREE is set (I_WILL_FREE will
prevent the VM to free the inode in XXXXX).

Potentially calling the above iput with I_WILL_FREE was also wrong
because it would recurse in iput_final (the second mainline bug).

The below (untested) patch fixes the nr_unused accounting, avoids recursing
in iput when I_WILL_FREE is set and makes sure (with the BUG_ON) that we
don't corrupt memory and that all holders that don't set I_WILL_FREE, keeps
a reference on the inode!

Signed-off-by: Andrea Arcangeli <andrea@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] modules: fix sparse warning for every MODULE_PARM

sparse complains about every MODULE_PARM used in a module: warning: symbol
'__parm_foo' was not declared.  Should it be static?

The fix is to split declaration and initialization.  While MODULE_PARM is
obsolete, it's not something sparse should report.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] extable: remove needless declaration

They aren't used anywhere in that file.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] setkeys needs root

Because people can play games reprogramming keys and leaving traps for the
next user of the console.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] firmware: fix all kernel-doc warnings

Convert existing function docs to kernel-doc format.  Eliminate all
kernel-doc warnings.  Fix some doc typos and a little whitespace cleanup.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] jiffies_64 cleanup

Define jiffies_64 in kernel/timer.c rather than having 24 duplicated
defines in each architecture.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Remove orphaned TIOCGDEV compat ioctl

This ioctl doesn't exist for native i386.

Signed-off-by: Brian Gerst <bgerst@didntduck.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext3: sparse fixes

Fix warnings from sparse due to un-declared functions that should either
have a header file or have been declared static

 fs/ext2/bitmap.c:14:15: warning: symbol 'ext2_count_free' was not declared. Should it be static?
 fs/ext2/namei.c:92:15: warning: symbol 'ext2_get_parent' was not declared. Should it be static?
 fs/ext3/bitmap.c:15:15: warning: symbol 'ext3_count_free' was not declared. Should it be static?
 fs/ext3/namei.c:1013:15: warning: symbol 'ext3_get_parent' was not declared. Should it be static?
 fs/ext3/xattr.c:214:1: warning: symbol 'ext3_xattr_block_get' was not declared. Should it be static?
 fs/ext3/xattr.c:358:1: warning: symbol 'ext3_xattr_block_list' was not declared. Should it be static?
 fs/ext3/xattr.c:630:1: warning: symbol 'ext3_xattr_block_find' was not declared. Should it be static?
 fs/ext3/xattr.c:863:1: warning: symbol 'ext3_xattr_ibody_find' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>