linux-2.6
17 years agoV4L/DVB (5444): Saa7134-dvb fix sleep function of the fmd1216 tuner.
Hartmut Hackmann [Tue, 13 Mar 2007 23:52:35 +0000 (20:52 -0300)] 
V4L/DVB (5444): Saa7134-dvb fix sleep function of the fmd1216 tuner.

Static locals should not be changed - the original contents gets lost.
Thanks to Trent Piepho for pointing me to this.

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5443): Saa7134: put tuner to sleep mode after board initialization
Hartmut Hackmann [Tue, 13 Mar 2007 23:44:22 +0000 (20:44 -0300)] 
V4L/DVB (5443): Saa7134: put tuner to sleep mode after board initialization

Besides power saving, this puts the AGC output of the tda8290
to tristate. This is necessary for some hybrid boards which
don't use a multiplexer for the AGC

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5440): Dvb-ttpci: Infrared remote initialization fix
Oliver Endriss [Tue, 13 Mar 2007 00:45:46 +0000 (21:45 -0300)] 
V4L/DVB (5440): Dvb-ttpci: Infrared remote initialization fix

Fix bug introduced during infrared refactoring.
Thanks to Johann Friedrichs for spotting this.

Thanks-to: Johann Friedrichs <johann.friedrichs@web.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5438): Fix ivtv yuv threshold handling
Ian Armstrong [Fri, 16 Mar 2007 10:44:42 +0000 (07:44 -0300)] 
V4L/DVB (5438): Fix ivtv yuv threshold handling

Modifies automatic mode selection for yuv playback. Behaviour is now that
source video with a vertical resolution below that of the currently set
broadcast mode will be treated as progressive. Video with a vertical
resolution greater or equal to the current broadcast mode (up to 576 lines)
will be treated as interlaced.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5437): Update cx23415 documentation
Ian Armstrong [Fri, 16 Mar 2007 10:40:48 +0000 (07:40 -0300)] 
V4L/DVB (5437): Update cx23415 documentation

Adds more osd mode switching information.
Corrects some information regarding mode selection & local alpha operation for
16 bit modes.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5436): Fix TV output initialization
Hans Verkuil [Tue, 13 Mar 2007 22:22:40 +0000 (19:22 -0300)] 
V4L/DVB (5436): Fix TV output initialization

The TV standard should be set AFTER the TV output is fully initialized.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5434): Updates to the tveeprom tuner, video decoder and audio chip
Steven Toth [Tue, 13 Mar 2007 01:26:40 +0000 (22:26 -0300)] 
V4L/DVB (5434): Updates to the tveeprom tuner, video decoder and audio chip

Some of the new tuner entries may need to be mapped to compatible
tuners already defined. I don't know for certain which tuners
are compatible between manufacturers.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5432): Cx88: whitespace cleanup
Michael Krufky [Sun, 11 Mar 2007 15:52:48 +0000 (12:52 -0300)] 
V4L/DVB (5432): Cx88: whitespace cleanup

replace leading spaces with tabs

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5431): Cx88: autodetect ADS Tech InstantTV DVB-S
Michael Krufky [Sun, 11 Mar 2007 15:48:04 +0000 (12:48 -0300)] 
V4L/DVB (5431): Cx88: autodetect ADS Tech InstantTV DVB-S

The ADS Tech InstantTV DVB-S is a clone of the KWorld DVB-S 100.
This patch adds autodetection support for this card based on
pci subsystem id.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5428): M920x: Detect zero-length I2C messages and fix a typo
Trent Piepho [Mon, 12 Mar 2007 15:13:12 +0000 (12:13 -0300)] 
V4L/DVB (5428): M920x: Detect zero-length I2C messages and fix a typo

Change a 00 to just 0
Detect zero-length I2C messages and return not supported.  I think I know
how to send one, but the problem is getting the slave's ack.  The only
point of a zero-length message is for probing; too see if the slave will
ack its address.  Since we don't know how to get the ack, we can't
support zero-length messages in a useful way, so it's probably best to
just return not supported for them.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5427): M920x: Improve I2C operations
Trent Piepho [Tue, 6 Mar 2007 02:55:00 +0000 (23:55 -0300)] 
V4L/DVB (5427): M920x: Improve I2C operations

Write some better documentation about what might be known about how the
m920x I2C works, since a datasheet is lacking.
The I2C xfer function should now handle more types of I2C transactions
than it could before.  Those it can't, will return error codes instead of
being executed incorrectly.  Multi-byte reads were not being done
correctly, which should be fixed.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5426): M920x: remove unneeded code
Aapo Tahkola [Mon, 5 Mar 2007 21:57:27 +0000 (18:57 -0300)] 
V4L/DVB (5426): M920x: remove unneeded code

Signed-off-by: Aapo Tahkola <aet@rasterburn.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5425): M920x: rework driver code to allow for different devices
Aapo Tahkola [Mon, 5 Mar 2007 21:54:27 +0000 (18:54 -0300)] 
V4L/DVB (5425): M920x: rework driver code to allow for different devices

Signed-off-by: Aapo Tahkola <aet@rasterburn.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5424): Fix i2c implementation for gl861 and au6610
Aapo Tahkola [Mon, 5 Mar 2007 21:25:36 +0000 (18:25 -0300)] 
V4L/DVB (5424): Fix i2c implementation for gl861 and au6610

- r/w bit is not part of the i2c address

Signed-off-by: Aapo Tahkola <aet@rasterburn.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5423): M920x: i2c cleanups
Aapo Tahkola [Mon, 5 Mar 2007 21:23:19 +0000 (18:23 -0300)] 
V4L/DVB (5423): M920x: i2c cleanups

- Implement m920x i2c as suggested by Pierre Willenbrock
- remove "magic" hack
- r/w bit is not part of the i2c address
- move hardware remarks to header file

Signed-off-by: Aapo Tahkola <aet@rasterburn.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5420): Initialize the inputs before registering the devices.
Hans Verkuil [Sun, 11 Mar 2007 17:16:42 +0000 (14:16 -0300)] 
V4L/DVB (5420): Initialize the inputs before registering the devices.

Once the devices have been registered anyone can start changing the inputs or
TV standard before they have been initialized by the driver. This leads to
cases were the input is changed in an udev rule, but after that rule is
triggered the tail-end of the ivtv driver initialization can override
that by selecting the tuner input.
The correct sequence is to first setup the input, initial frequency and TV
standard before finally registering the video devices. This prevents any
udev rules from being triggered prematurely.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5419): Add comment how the speed field is interpreted.
Hans Verkuil [Sun, 11 Mar 2007 13:54:11 +0000 (10:54 -0300)] 
V4L/DVB (5419): Add comment how the speed field is interpreted.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5418): Speed is a signed 32-bit integer, not unsigned.
Hans Verkuil [Sun, 11 Mar 2007 13:50:03 +0000 (10:50 -0300)] 
V4L/DVB (5418): Speed is a signed 32-bit integer, not unsigned.

Negative speed values have to be allowed for reverse playback.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5417): First unregister the driver, and then free the memory.
Hans Verkuil [Sat, 10 Mar 2007 23:50:51 +0000 (20:50 -0300)] 
V4L/DVB (5417): First unregister the driver, and then free the memory.

ivtv_remove which is called by pci_unregister_driver was still using
memory that was already freed. Ouch.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5416): Use pci_register_driver instead of pci_module_init in ivtv.
Hans Verkuil [Sat, 10 Mar 2007 23:34:54 +0000 (20:34 -0300)] 
V4L/DVB (5416): Use pci_register_driver instead of pci_module_init in ivtv.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5414): Add missing kfree in early exit of saa7115.
Hans Verkuil [Sat, 10 Mar 2007 23:11:23 +0000 (20:11 -0300)] 
V4L/DVB (5414): Add missing kfree in early exit of saa7115.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5413): Use spin_lock_init to fix lockdep warnings.
Hans Verkuil [Sat, 10 Mar 2007 23:09:07 +0000 (20:09 -0300)] 
V4L/DVB (5413): Use spin_lock_init to fix lockdep warnings.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5412): Fix VIDIOC_TRY_ENCODER_CMD and VIDEO_TRY_COMMAND
Hans Verkuil [Sat, 10 Mar 2007 21:29:48 +0000 (18:29 -0300)] 
V4L/DVB (5412): Fix VIDIOC_TRY_ENCODER_CMD and VIDEO_TRY_COMMAND

VIDIOC_TRY_ENCODER_CMD did the same as VIDIOC_ENCODER_CMD, now it no longer
touches the encoder.
Both the encoder and decoder commands did not clear the flags field of unknown
flags.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5411): Use v4l_printk_ioctl for debug
Hans Verkuil [Sat, 10 Mar 2007 21:19:12 +0000 (18:19 -0300)] 
V4L/DVB (5411): Use v4l_printk_ioctl for debug

Using v4l_printk_ioctl saves a lot of code duplication. Also moved a few
ioctl cases to another function, improving the ioctl grouping.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5410): Add VIDIOC_G/S_PRIORITY support to ivtv.
Hans Verkuil [Sat, 10 Mar 2007 20:59:15 +0000 (17:59 -0300)] 
V4L/DVB (5410): Add VIDIOC_G/S_PRIORITY support to ivtv.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5409): Add CARDLIST.ivtv and README.ivtv
Hans Verkuil [Sat, 10 Mar 2007 16:56:56 +0000 (13:56 -0300)] 
V4L/DVB (5409): Add CARDLIST.ivtv and README.ivtv

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5407a): Update feature-removal-schedule.txt: remove VIDIOC_S/G_MPEGCOMP
Hans Verkuil [Sat, 10 Mar 2007 11:10:11 +0000 (08:10 -0300)] 
V4L/DVB (5407a): Update feature-removal-schedule.txt: remove VIDIOC_S/G_MPEGCOMP

Those two experimental APIs never worked fine nor, afaik, were
implemented at the apps. Their functionalities were implemented by other
means.
So, let's remove those obsolete stuff.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5406): Add comment why the symbols are exported.
Hans Verkuil [Sat, 10 Mar 2007 09:59:44 +0000 (06:59 -0300)] 
V4L/DVB (5406): Add comment why the symbols are exported.

It is not immediately obvious why the ivtv symbols are exported
in ivtv-driver.c since both ivtv-fb and the IR-blaster module
are still out-of-tree, currently being ported to be in kernel.

Added a comment so people are aware of these issues.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5405): Add missing includes.
Hans Verkuil [Sat, 10 Mar 2007 09:54:58 +0000 (06:54 -0300)] 
V4L/DVB (5405): Add missing includes.

Every file should include the headers containing the prototypes
for its global functions.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5404): Merges VBI & YUV handling into a single work queue.
Hans Verkuil [Sat, 10 Mar 2007 09:52:02 +0000 (06:52 -0300)] 
V4L/DVB (5404): Merges VBI & YUV handling into a single work queue.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5403): Set vsync_field correctly in ivtv.
Hans Verkuil [Sat, 10 Mar 2007 09:30:19 +0000 (06:30 -0300)] 
V4L/DVB (5403): Set vsync_field correctly in ivtv.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5402): Add vsync_field to the union in video_event for VIDEO_EVENT_VSYNC
Hans Verkuil [Sat, 10 Mar 2007 09:24:30 +0000 (06:24 -0300)] 
V4L/DVB (5402): Add vsync_field to the union in video_event for VIDEO_EVENT_VSYNC

VIDEO_EVENT_VSYNC needs to tell the application which field it was that
received a VSYNC (odd/even/progressive). The vsync_field was added to the
union in video_event for this purpose.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5399): Usbvideo module handling
Oliver Neukum [Fri, 9 Mar 2007 21:05:43 +0000 (18:05 -0300)] 
V4L/DVB (5399): Usbvideo module handling

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5398): Cpia_pp.c: don't use _WORK_NAR
Oleg Nesterov [Fri, 9 Mar 2007 20:43:39 +0000 (17:43 -0300)] 
V4L/DVB (5398): Cpia_pp.c: don't use _WORK_NAR

pp_cam_entry->cb_task need not to be _NOAUTOREL ... because in fact it is
never used ???

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5397): Saa7134: fix MODULES=n compilation
Adrian Bunk [Fri, 9 Mar 2007 20:39:52 +0000 (17:39 -0300)] 
V4L/DVB (5397): Saa7134: fix MODULES=n compilation

This patch fixes the following compile error with CONFIG_MODULES=n:
  CC      drivers/media/video/saa7134/saa7134-core.o
/home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979:24: error: macro "request_submodules" passed 1 arguments, but takes just 0
/home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c: In function 'saa7134_initdev':
/home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979: error: 'request_submodules' undeclared (first use in this function)
/home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979: error: (Each undeclared identifier is reported only once
/home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979: error: for each function it appears in.)
make[5]: *** [drivers/media/video/saa7134/saa7134-core.o] Error 1

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5392): Zr364xx: Use kernel's byte-swapping function
Trent Piepho [Wed, 7 Mar 2007 21:19:49 +0000 (18:19 -0300)] 
V4L/DVB (5392): Zr364xx: Use kernel's byte-swapping function

Some code to swap bytes wasn't using the swab16() function that the
kernel provides for this.  Make use of it, which results in more
efficient code.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Antoine Jacquet <royale@zerezo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5391): Saa7134: Clean up printk()s
Trent Piepho [Wed, 7 Mar 2007 21:19:48 +0000 (18:19 -0300)] 
V4L/DVB (5391): Saa7134: Clean up printk()s

Change some debug messages from printk() to dprintk().

Add KERN_WARNING and KERN_ERR level indicators to other printk()s that
lacked them.

Format printk lines with consistent ("%s/dvb: ", dev->name) prefix.

Fixed dprintk macro, which had an if with no else that wasn't protected
with a do {} while(0) block.  That leads to "if(...) dprintk(); else" not
doing what one would expect.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5389): Add tveeprom entry for tuner LG S701D MK3
Hans Verkuil [Wed, 7 Mar 2007 20:10:07 +0000 (17:10 -0300)] 
V4L/DVB (5389): Add tveeprom entry for tuner LG S701D MK3

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5388): Ivtv warning fix
Andrew Morton [Wed, 7 Mar 2007 14:28:33 +0000 (11:28 -0300)] 
V4L/DVB (5388): Ivtv warning fix

drivers/media/video/ivtv/ivtv-i2c.c:547: warning: initializer-string for array of chars is too long
drivers/media/video/ivtv/ivtv-i2c.c:547: warning: (near initialization for 'ivtv_i2c_client_template.name')

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5386): Add some missing Hauppauge and Belkin devices to the driver
Dwaine P. Garden [Tue, 6 Mar 2007 18:15:19 +0000 (15:15 -0300)] 
V4L/DVB (5386): Add some missing Hauppauge and Belkin devices to the driver

-Add some missing Hauppauge and Belkin devices to the driver.
-Fixed up some device descriptions.

Signed-off-by: Dwaine P. Garden <DwaineGarden@rogers.com>
Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5385): Fix compilation issue with zr364xx when V4L1 is disabled
Antoine Jacquet [Mon, 5 Mar 2007 09:32:29 +0000 (06:32 -0300)] 
V4L/DVB (5385): Fix compilation issue with zr364xx when V4L1 is disabled

Add a missing header to fix compilation issue in the zr364xx driver when
CONFIG_VIDEO_V4L1 and CONFIG_VIDEO_V4L1_COMPAT are not set.

Signed-off-by: Antoine Jacquet <royale@zerezo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5383): Fix duplicated codes in Pinnacle Grey remote
Emil Georgiev [Sun, 4 Mar 2007 10:03:17 +0000 (07:03 -0300)] 
V4L/DVB (5383): Fix duplicated codes in Pinnacle Grey remote

The keymap for this remote had duplicated labels for different keys,
which resulted in those key pairs being unable to function as different
inputs.

Signed-off-by: Emil Georgiev <emilonlinester@gmail.com>
Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5381): Dvb-ttpci: Update frontend lock status in transfer mode (bugfix)
Oliver Endriss [Sat, 3 Mar 2007 17:45:48 +0000 (14:45 -0300)] 
V4L/DVB (5381): Dvb-ttpci: Update frontend lock status in transfer mode (bugfix)

In transfer/replay mode the frontend lock status was never updated.
This caused a 'black screen' if VDR switched from transfer mode to
live mode on the same transponder.
Thanks to Marco Schluessler for spotting the problem.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5380): Cx25840-firmware include cleanup
Jean Delvare [Sat, 3 Mar 2007 16:34:34 +0000 (13:34 -0300)] 
V4L/DVB (5380): Cx25840-firmware include cleanup

There is no reason why cx25840-firmware.c would need to include
<linux/i2c-algo-bit.h>.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5379): If possible make vars/functions static.
Hans Verkuil [Sat, 3 Mar 2007 11:50:42 +0000 (08:50 -0300)] 
V4L/DVB (5379): If possible make vars/functions static.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5378): Add missing IVTV_FB_WARN #define
Hans Verkuil [Sat, 3 Mar 2007 11:40:36 +0000 (08:40 -0300)] 
V4L/DVB (5378): Add missing IVTV_FB_WARN #define

This is needed for ivtv-fb.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5377): Replace SA_* with IRQF_*
Hans Verkuil [Sat, 3 Mar 2007 11:28:54 +0000 (08:28 -0300)] 
V4L/DVB (5377): Replace SA_* with IRQF_*

SA_* interrupt flags are being phased out, update to newer flags.
Thanks to Maarten Maathuis for pointing this out to me.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5376): Add dependency on VIDEO_V4L1
Hans Verkuil [Sat, 3 Mar 2007 11:15:36 +0000 (08:15 -0300)] 
V4L/DVB (5376): Add dependency on VIDEO_V4L1

VIDEO_V4L1 is needed to get tvaudio to be built. Stupid really as ivtv is only
using the v4l2 API to communicate with tvaudio.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5375): Add missing VIDEO_CX25840 dep, remove unused VIDEO_TLV320AIC23B dep
Hans Verkuil [Sat, 3 Mar 2007 11:01:54 +0000 (08:01 -0300)] 
V4L/DVB (5375): Add missing VIDEO_CX25840 dep, remove unused VIDEO_TLV320AIC23B dep

VIDEO_CX25840 was missing in the ivtv dependencies. VIDEO_TLV320AIC23B
was removed since it isn't used by ivtv.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5374): Or51132: refactor i2c code, improve error resilience
Trent Piepho [Fri, 2 Mar 2007 22:42:21 +0000 (19:42 -0300)] 
V4L/DVB (5374): Or51132: refactor i2c code, improve error resilience

The code the i2c transactions was leftover from the old V4L-based ATSC
driver.  It did too little with too much code.  It is re-written to
remove unnecessary parameters and be more efficient.  A demod register
can now be read with one function call, instead of repeating a dozen line
block of code each time.

There were msleep()'s, which appear to be unnecessary, spread around all
the I2C transactions.  These have been removed.  Reading SNR used to take
about 130 ms, now it's down to 1.8 ms.

Reads from the demodulator's registers do not return correct results
sometimes.  Adding or removing the delays in the I2C transactions did not
appear to effect the probability of failure.  If anything, the
transactions without delays were less likely to fail, but since far more
transactions could be made per second the number of failures per hour was
greater.

To increase reliability, the SNR and get_params functions will now retry
once if they get bad data back.  This appears to have reduced the
probability of failure to effectively zero.
Some error messages are cleaned up or given KERN_* levels when they were
missing.

or51132_setmode() wasn't returning correct error codes, which is fixed as
well.

CC: Rusty Scott <rustys@ieee.org>
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5373): [PATCH] Hauppauge Nova-T endianess problem on powerpc
Dennis Ranke [Fri, 2 Mar 2007 09:27:28 +0000 (06:27 -0300)] 
V4L/DVB (5373): [PATCH] Hauppauge Nova-T endianess problem on powerpc

When trying to use a Hauppauge Nova-T Stick on a big-endian architecture
(such as powerpc) no frontend can be attached.
The attached patch fixes this problem by removing two lines in
dib0700_ctrl_rd() that try to correct the endianess on two values that
already are correct:
-       /* think about swapping here */
-       value = le16_to_cpu(value);
-       index = le16_to_cpu(index);
With this simple patch this dvb hardware works great, thanks to anyone
involved for the good work. :)

Signed-off-by: Dennis Ranke <mail@exoticorn.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5371): [PATCH] Pinnacle PCTV Sat Pro USB (450e) support by ttusb2.c (400e...
Christophe Cattelain [Fri, 27 Apr 2007 15:31:32 +0000 (12:31 -0300)] 
V4L/DVB (5371): [PATCH] Pinnacle PCTV Sat Pro USB (450e) support by ttusb2.c (400e driver)

Added USB_PID_PCTV_450E to the 'usb_device_id ttusb2_table' and an entry in the
.devices table.  The 400e driver now supports the 'Pinnacle PCTV Sat Pro USB
(450e)' with USB_ID 2304:0222.

Signed-off-by: Christophe Cattelain <xof@skynet.be>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5369): Fixed 1 byte too short buffer in tda827x.c
Hartmut Hackmann [Fri, 27 Apr 2007 15:31:32 +0000 (12:31 -0300)] 
V4L/DVB (5369): Fixed 1 byte too short buffer in tda827x.c

- The i2c data buffer in tda827xa_set_params was 1 byte too short
- saa7134-dvb now gives an error mesage if tda827x could not be attached
- coding style fix in tda1004x.c

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5367): Pvrusb2: (trivial) Fix too-wide source line
Mike Isely [Fri, 27 Apr 2007 15:31:31 +0000 (12:31 -0300)] 
V4L/DVB (5367): Pvrusb2: (trivial) Fix too-wide source line

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5363): Dvb: Remove lgh06xf driver
Trent Piepho [Fri, 27 Apr 2007 15:31:30 +0000 (12:31 -0300)] 
V4L/DVB (5363): Dvb: Remove lgh06xf driver

The code of the dvb-pll driver and the lgh06xf driver is nearly
identical.  The main difference is that the lgh06xf driver would set the
AGC TOP value on every tune call.  The dvb-pll driver now has the ability
to set the AGC TOP when the front-end device is opened, which is a better
way to go about it.  By using this ability of dvb-pll, the lgh06xf driver
is made unnecessary.

There is one other difference.  dvb-pll will probe for the presence of an
I2C pll chip by doing a one byte read, the lgh06xf driver did not do
this.  In some devices the PLL is not reachable over I2C at the timer the
tuner is attached.  Some more initialization, such as firmware loading,
must take place first.  None of the devices using a LG-H06xF should have
this problem.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5362): Dvb-pll: add code for doing tuner initialization
Trent Piepho [Fri, 27 Apr 2007 15:31:29 +0000 (12:31 -0300)] 
V4L/DVB (5362): Dvb-pll: add code for doing tuner initialization

Some tuners need or benefit from initialization, to change certain
settings from their power on default values.

Typically, tuners with TUA603x PLLs can benefit from setting the AGC TOP
value to something else.  This patch includes code to set the AGC TOP to
103 dBuV for the Thomson DTT-761x tuners, which I have experimentally
verified gives the best SNR readings, increasing SNR by about 0.19 dB
over the default value.

Other tuners can make use of this as well.  For example, the separate LG
TDVS-H06xF driver's only difference from dvb-pll is this same setting of
AGC TOP value.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5361): Dvb-pll: Fix Kconfig files and allow dvb-pll to be optional
Trent Piepho [Fri, 27 Apr 2007 15:31:28 +0000 (12:31 -0300)] 
V4L/DVB (5361): Dvb-pll: Fix Kconfig files and allow dvb-pll to be optional

A number of drivers selected DVB_PLL when they did not need it, and some
that did need it did not select it.

The DVB_PLL option is given a name and help text, so that it will show up
in the config menu.  DVB_PLL support can be turned on if an out-of-tree
driver needs it.

The standard dvb fe customization support is added to dvb-pll.h.  Since
all modules which select DVB_PLL do so unconditionally, it is not
possible to turn dvb-pll off when an enabled module selects it, unlike
most of the other frontend/tuner drivers.  This is because the users of
dvb-pll have static references to dvb-pll symbols other than the attach
function.  If these references are removed, then dvb-pll will be
disablable as the other frontend/tuner drivers are.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5360): Dvb-pll: Use sizeof() to get name length
Trent Piepho [Fri, 27 Apr 2007 15:31:27 +0000 (12:31 -0300)] 
V4L/DVB (5360): Dvb-pll: Use sizeof() to get name length

Better to use sizeof() to get the size of the output buffer for the tuner
name, instead of just hard coding 128.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5356): Fix bogus error messages in ivtv for VIDIOC_G_CHIP_IDENT
Hans Verkuil [Fri, 27 Apr 2007 15:31:27 +0000 (12:31 -0300)] 
V4L/DVB (5356): Fix bogus error messages in ivtv for VIDIOC_G_CHIP_IDENT

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5355): Add VIDIOC_G_CHIP_IDENT to various i2c modules
Hans Verkuil [Fri, 27 Apr 2007 15:31:26 +0000 (12:31 -0300)] 
V4L/DVB (5355): Add VIDIOC_G_CHIP_IDENT to various i2c modules

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder
Hans Verkuil [Fri, 27 Apr 2007 15:31:25 +0000 (12:31 -0300)] 
V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder

It took three core maintainers, over four years of work, eight new i2c
modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced
VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding
API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac
support from Axel Thimm, (hardware) support from Hauppauge, support and
assistance from the v4l-dvb people and the many, many users of ivtv to
finally make it possible to merge this driver into the kernel.
Thank you all!

Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: Chris Kennedy <c@groovy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: John P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5344): Dvb-ttpci: Support for MSC_RAW and MSC_SCAN RC events
Oliver Endriss [Fri, 27 Apr 2007 15:31:24 +0000 (12:31 -0300)] 
V4L/DVB (5344): Dvb-ttpci: Support for MSC_RAW and MSC_SCAN RC events

Support for MSC_RAW and MSC_SCAN remote control events.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5341): Add cx23415/6 chip idents.
Hans Verkuil [Fri, 27 Apr 2007 15:31:23 +0000 (12:31 -0300)] 
V4L/DVB (5341): Add cx23415/6 chip idents.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5336): Cx23416 doc updates + rename CX2341X_ENC_UNKNOWN
Hans Verkuil [Fri, 27 Apr 2007 15:31:22 +0000 (12:31 -0300)] 
V4L/DVB (5336): Cx23416 doc updates + rename CX2341X_ENC_UNKNOWN

The documentation of Several miscellaneous commands was updated.
As a result of which the CX2341X_ENC_UNKNOWN command was renamed to
CX2341X_ENC_SET_VERT_CROP_LINE.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5335): Budget-ci: Use the repeat handling of the input subsystem
David Härdeman [Fri, 27 Apr 2007 15:31:22 +0000 (12:31 -0300)] 
V4L/DVB (5335): Budget-ci: Use the repeat handling of the input subsystem

The attached patch contains the last set of changes to the budget-ci IR
handling which makes it use the repeat handling of the input subsystem.
This allows some code simplification, makes sure that repeat key presses
are reported as such and also allows the "debounce" hack to be removed
altogether.
In addition a couple of static variables were removed which would have
confused the IR code if more than one card is used.

Signed-off-by: David Hardeman <david@hardeman.nu>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5334): Dvb-ttpci: Infrared remote control refactoring
Oliver Endriss [Fri, 27 Apr 2007 15:31:21 +0000 (12:31 -0300)] 
V4L/DVB (5334): Dvb-ttpci: Infrared remote control refactoring

Infrared remote control support rewritten.
Now each device provides its own event device, keymap, protocol,
inversion and address setting.
EVIOCGKEYCODE and EVIOCSKEYCODE ioctls are supported to read/modify
a keymap. Keymaps may be loaded using
- input tools (keyb etc.)
- av7110_loadkeys (obsolete, for backward compatibility)
New command line parameters:
- ir_protocol:    select infrared protocol: 0 RC5, 1 RCMM (default)
- ir_inversion:   signal inversion: 0 not inverted (default), 1 inverted
- ir_device_mask: bitmask of infrared devices (default: accept all)
Those parameters may be set anytime.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5331): Identify MSI TV@nywhere Duo
Peter Missel [Fri, 27 Apr 2007 15:31:20 +0000 (12:31 -0300)] 
V4L/DVB (5331): Identify MSI TV@nywhere Duo

It is a Lifeview Duo with a different ID

Signed-off-by: Peter Missel <peter.missel@onlinehome.de>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5330): Added card definition for AverMedia M102 miniPCI
Markus Rechberger [Fri, 27 Apr 2007 15:31:19 +0000 (12:31 -0300)] 
V4L/DVB (5330): Added card definition for AverMedia M102 miniPCI

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5329): Some saa7134 cleanups
Heikki Orsila [Fri, 27 Apr 2007 15:31:18 +0000 (12:31 -0300)] 
V4L/DVB (5329): Some saa7134 cleanups

- use generic sort instead of bubblesort
 - removed useless saa7134_video_fini function
 - small coding style changes

Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5326): Allow to set tuner_config in attach inform
Hartmut Hackmann [Fri, 27 Apr 2007 15:31:18 +0000 (12:31 -0300)] 
V4L/DVB (5326): Allow to set tuner_config in attach inform

This patch move the assignment of the tuner config and the callback
before the check whether it is called in the attach inform.
This solves a module load order issue

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5324): This patch fixes request_module_depend()
Markus Rechberger [Fri, 27 Apr 2007 15:31:17 +0000 (12:31 -0300)] 
V4L/DVB (5324): This patch fixes request_module_depend()

this patch fixes request_module_depend()

Signed-off-by: Markus Rechberger <markus.rechberger@amd.com>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5323): Updated support for tuner callbacks
Hartmut Hackmann [Fri, 27 Apr 2007 15:31:17 +0000 (12:31 -0300)] 
V4L/DVB (5323): Updated support for tuner callbacks

This change supplies a more generic version of the tuner callback.
The tuner struct now has a function pointer
  int (*tuner_callback) (void *dev, int command, int arg)
additionally to a int config parameter.
both can be set through the TUNER_SET_TYPE_ADDR client call.
Note that the meaning of the parameters depend on the tuner type.

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5322): Removed board naming code in saa7134-dvb
Hartmut Hackmann [Fri, 27 Apr 2007 15:31:16 +0000 (12:31 -0300)] 
V4L/DVB (5322): Removed board naming code in saa7134-dvb

This is for better consistency with other drivers

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5321): Saa7134-dvb: initialize the dvb frontend in dvb_init
Hartmut Hackmann [Fri, 27 Apr 2007 15:31:16 +0000 (12:31 -0300)] 
V4L/DVB (5321): Saa7134-dvb: initialize the dvb frontend in dvb_init

The hardware is completely initialized afterwards, especially the
tda10046 has its firmware - which is also necessary in analog mode
of some hybrid boards.
Calling the sleep function afterwards saves power and definitely puts
hybrid boards into analog mode without additional code elsewere.

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5320): Filled in limiting values in tda827x.c
Hartmut Hackmann [Fri, 27 Apr 2007 15:31:15 +0000 (12:31 -0300)] 
V4L/DVB (5320): Filled in limiting values in tda827x.c

The parameters for minimum and maximum frequency were missing.
Also added mail addresses of the module authors.

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5319): Set tda827x to sleep mode after attach
Hartmut Hackmann [Fri, 27 Apr 2007 15:31:15 +0000 (12:31 -0300)] 
V4L/DVB (5319): Set tda827x to sleep mode after attach

This change sets the tda827x to sleep mode right after attach in dvb
mode. It is just to save power. For the same reason, the ADC of the
tda10046 gets turned off in sleep mode.

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5318): Fix tda8290 code for tda827x module
Hartmut Hackmann [Fri, 27 Apr 2007 15:31:15 +0000 (12:31 -0300)] 
V4L/DVB (5318): Fix tda8290 code for tda827x module

During tuner attach, the pointers to host dev structure
are not set yet, so the I2c adapter needs to be accessed differently.
This patch also does some minor cleanup in the saa7134-dvb module.

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5317): Create tda827x dvb tuner module
Michael Krufky [Fri, 27 Apr 2007 15:31:14 +0000 (12:31 -0300)] 
V4L/DVB (5317): Create tda827x dvb tuner module

The patch moves the tda827x dvb tuning code to a separate module

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5316): Add radio support for the Lifeview FlyDVB-T Duo
Peter Missel [Fri, 27 Apr 2007 15:31:14 +0000 (12:31 -0300)] 
V4L/DVB (5316): Add radio support for the Lifeview FlyDVB-T Duo

There are card variants supporting FM radio through tda8275.

Signed-off-by: Peter Missel <peter.missel@onlinehome.de>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5315): Tda1004x: check request firmware for NULL ponter again
Hartmut Hackmann [Fri, 27 Apr 2007 15:31:13 +0000 (12:31 -0300)] 
V4L/DVB (5315): Tda1004x: check request firmware for NULL ponter again

In older versions, this was used to decide whether to boot from
eeprom or file. This is no longer necessary but the check helps to avoid
an oops with misconfigured cards.

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5314): Added support for tda827x tuners with preamlifiers
Hartmut Hackmann [Fri, 27 Apr 2007 15:31:12 +0000 (12:31 -0300)] 
V4L/DVB (5314): Added support for tda827x tuners with preamlifiers

This patch contains
- new tuning code for the tda827xa silicon tuner.
- controls the preamplifier of some boards with this tuner.
- support for the Philips Tiger S hybrid DVB-T reference design.
- reworked the saa7134-dvb modulue to get rid of most of the
  small board specific functions.

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5313): Added a config entry and a gpio function pointer to tuner struct
Hartmut Hackmann [Fri, 27 Apr 2007 15:31:12 +0000 (12:31 -0300)] 
V4L/DVB (5313): Added a config entry and a gpio function pointer to tuner struct

These entries mainly are to support configurations of the tda827x
silicon tuner with a preamplifier.
The values can be set throgh the attach inform or through
the extended TUNER_SET_TYPE_ADDR client call. The function pointer
will only be updated if the parameter is not NULL.
Since a typecast is necessary to set the pointer, i added a typedef for
this pointer (tuner_gpio_func_t) in tuner.h

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5312): Saa713x: added a GPIO handler function
Hartmut Hackmann [Fri, 27 Apr 2007 15:31:11 +0000 (12:31 -0300)] 
V4L/DVB (5312): Saa713x: added a GPIO handler function

This function allows to set, clear and tristate the GPIO ports.

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5311): Tda1004x driver updates
Hartmut Hackmann [Fri, 27 Apr 2007 15:31:10 +0000 (12:31 -0300)] 
V4L/DVB (5311): Tda1004x driver updates

There are the following changes:
- separate configuration of IF and GPIOs.
- set GPIOs before firmware load. This helps to avoid I2C address
  collisions.
- if desired invert GPIOs at sleep (automatic return to analog mode of card).
- added 3 tuner configuration bytes to config stuct.
- added i2c gate address to config struct.
- moved _state struct declaration to header file to make it accessible
  on board layer.
- added "conf_probed" to the state struct to allow i.e. probing for correct
  tuner version.
- changed firmware load mechanism to always:
  + check if already loaded
  + try to boot from eeprom
  + try downlad from host
- corrected name of tda10046 firmware image (backward compatible).

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5307): Add support for the cx23415 MPEG decoding features.
Hans Verkuil [Fri, 27 Apr 2007 15:31:09 +0000 (12:31 -0300)] 
V4L/DVB (5307): Add support for the cx23415 MPEG decoding features.

The cx23415 adds some extra features that this DVB decoding API did
not support. This API has been expanded to support the required
features. Both source and binary backwards compatibility is kept
intact by these changes. So existing applications are not affected.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5306): Add support for VIDIOC_G_CHIP_IDENT
Hans Verkuil [Fri, 27 Apr 2007 15:31:08 +0000 (12:31 -0300)] 
V4L/DVB (5306): Add support for VIDIOC_G_CHIP_IDENT

VIDIOC_G_CHIP_IDENT improves debugging of card problems: it can be
used to detect which chips are on the board and based on that information
selected register dumps can be made, making it easy to debug complicated
media chips containing tens or hundreds of registers.
This ioctl replaces the internal VIDIOC_INT_G_CHIP_IDENT ioctl.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5299): Added support for loading cx88-dvb and cx88-blackbird
Markus Rechberger [Fri, 27 Apr 2007 15:31:07 +0000 (12:31 -0300)] 
V4L/DVB (5299): Added support for loading cx88-dvb and cx88-blackbird

Added support for loading cx88-dvb and cx88-blackbird

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5298): Added support for deferred module requesting to cx88
Markus Rechberger [Fri, 27 Apr 2007 15:31:06 +0000 (12:31 -0300)] 
V4L/DVB (5298): Added support for deferred module requesting to cx88

added support for deferred module requesting to cx88

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5297): Fix identation on tda10021.c
Mauro Carvalho Chehab [Fri, 27 Apr 2007 15:31:06 +0000 (12:31 -0300)] 
V4L/DVB (5297): Fix identation on tda10021.c

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5294): Make pvr2_encoder_prep_config() static
Adrian Bunk [Fri, 27 Apr 2007 15:31:05 +0000 (12:31 -0300)] 
V4L/DVB (5294): Make pvr2_encoder_prep_config() static

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5293): Make dvb_usb_gl861_debug static
Adrian Bunk [Fri, 27 Apr 2007 15:31:05 +0000 (12:31 -0300)] 
V4L/DVB (5293): Make dvb_usb_gl861_debug static

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
17 years agoV4L/DVB (5290): Add support for VIDIOC_INT_G/S_STD_OUTPUT
Hans Verkuil [Fri, 27 Apr 2007 15:31:04 +0000 (12:31 -0300)] 
V4L/DVB (5290): Add support for VIDIOC_INT_G/S_STD_OUTPUT

Added VIDIOC_INT_G_STD_OUTPUT and VIDIOC_INT_S_STD_OUTPUT to allow drivers
to set the TV standard for video output separately from the video capture.
This is needed for cx23415 support where the decoder is separate from the
encoder and can have a different TV standard.
Modified the saa7127 module to listen to VIDIOC_INT_G/S_STD_OUTPUT instead
of VIDIOC_G/S_STD.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5289): Add support for video output overlays.
Hans Verkuil [Fri, 27 Apr 2007 15:31:02 +0000 (12:31 -0300)] 
V4L/DVB (5289): Add support for video output overlays.

Add V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY support.
Also add support for local and global alpha overlays.
Add new field enums V4L2_FIELD_INTERLACED_TB and V4L2_FIELD_INTERLACED_BT.
These changes are needed to support the ivtv On Screen Display features.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5278): Bt8xx/: possible cleanups
Adrian Bunk [Fri, 27 Apr 2007 15:31:01 +0000 (12:31 -0300)] 
V4L/DVB (5278): Bt8xx/: possible cleanups

This patch contains the following possible cleanups:
- remove the following unused global functions:
  - bttv-if.c: bttv_get_cardinfo()
  - bttv-if.c: bttv_get_id()
  - bttv-if.c: bttv_get_gpio_queue()
  - bttv-if.c: bttv_i2c_call()
- remove the following unused EXPORT_SYMBOL's:
  - bttv-gpio.c: bttv_sub_bus_type
  - bttv-gpio.c: bttv_gpio_inout
  - bttv-gpio.c: bttv_gpio_read
  - bttv-gpio.c: bttv_gpio_write
  - bttv-gpio.c: bttv_gpio_bits

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5272): Add V4L2_CAP_VIDEO_OUTPUT_POS capability
Hans Verkuil [Fri, 27 Apr 2007 15:31:01 +0000 (12:31 -0300)] 
V4L/DVB (5272): Add V4L2_CAP_VIDEO_OUTPUT_POS capability

Add V4L2_CAP_VIDEO_OUTPUT_POS capability and x, y position coordinates
to struct v4l2_pix_format.
This is needed to support positioning the MPEG/YUV output of the cx23415.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5268): Add support for three new MPEG controls.
Hans Verkuil [Fri, 27 Apr 2007 15:31:00 +0000 (12:31 -0300)] 
V4L/DVB (5268): Add support for three new MPEG controls.

Added V4L2_CID_MPEG_AUDIO_MUTE, V4L2_CID_MPEG_VIDEO_MUTE and
V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS controls together with
their implementation in the cx2341x module.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5257): USB: add zr364xx V4L2 driver
Antoine Jacquet [Fri, 27 Apr 2007 15:30:59 +0000 (12:30 -0300)] 
V4L/DVB (5257): USB: add zr364xx V4L2 driver

This patch adds a V4L2 driver giving support for USB webcams based on the
zr364xx chipsets.

Signed-off-by: Antoine Jacquet <royale@zerezo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Fri, 27 Apr 2007 17:47:29 +0000 (10:47 -0700)] 
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/selinux-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  selinux: preserve boolean values across policy reloads
  selinux: change numbering of boolean directory inodes in selinuxfs
  selinux: remove unused enumeration constant from selinuxfs
  selinux: explicitly number all selinuxfs inodes
  selinux: export initial SID contexts via selinuxfs
  selinux: remove userland security class and permission definitions
  SELinux: move security_skb_extlbl_sid() out of the security server
  MAINTAINERS: update selinux entry
  SELinux: rename selinux_netlabel.h to netlabel.h
  SELinux: extract the NetLabel SELinux support from the security server
  NetLabel: convert a BUG_ON in the CIPSO code to a runtime check
  NetLabel: cleanup and document CIPSO constants

17 years agomake SysRq-T show all tasks again
Ingo Molnar [Thu, 26 Apr 2007 03:50:03 +0000 (20:50 -0700)] 
make SysRq-T show all tasks again

show_state() (SysRq-T) developed the buggy habbit of not showing
TASK_RUNNING tasks.  This was due to the mistaken belief that state_filter
== -1 would be a pass-through filter - while in reality it did not let
TASK_RUNNING == 0 p->state values through.

Fix this by restoring the original '!state_filter means all tasks'
special-case i had in the original version.  Test-built and test-booted on
i686, SysRq-T now works as intended.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoseqlocks: trivial remove weird whitespace
Daniel Walker [Thu, 26 Apr 2007 16:46:05 +0000 (09:46 -0700)] 
seqlocks: trivial remove weird whitespace

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>