[SPARC64]: Use SPARSEMEM_STATIC

Decrease the SECTION_SIZE_BITS --> MAX_PHYSADDR_BITS
range a little bit.

The cost of going to SPARSEMEM_STATIC becomes 8K of BSS space, and in
return we save a pointer dereferences on every page struct lookup.
Even better we hit the main kernel image for the base address which is
in a hugepage locked TLB entry.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Use DECLARE_BITMAP in struct pci_iommu.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Force dummy host controller onto bus zero.

This helps deal with the invisible bridge that sits between
the host controller and the top-most visisble PCI devices
on hypervisor systems.

For example, on T1000 the bus-range property says 2 --> 4
and so there is a PCI express bridge at bus 2, devfn 0, etc.

So if we don't force the dummy host controller to bus zero,
we'll try to create two devices with the same domain/bus/devfn
triplet.

Also, add some more log diagnostics to make debugging stuff like this
easyer.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Add dummy host controller to root of all PCI domains.

We fake up a dummy one in all cases because that is the simplest
thing to do and it happens to be necessary for hypervisor systems.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Const'ify pci_iommu_ops.

Based upon a similar patch for x86_64 written by
Stephen Hemminger.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Kill pbm->pci_first_slot.

Set but never used.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Kill pci_controller->pbms_same_domain

We don't do the "Simba APB is a PBM" bogosity for Sabre
controllers any longer, so this pbms_same_domain thing
is no longer necessary.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Kill pci_controller->base_address_update().

Implemented but never actually used.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Kill pci_controller->resource_adjust()

All the implementations can be identical and generic, so
no need for controller specific methods.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Kill PBM ranges software state.

It is only used in one spot and we can just fetch the
OF property right there.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Kill PBM intmap software state.

Set but never used.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Consolidate PCI mem/io resource determination.

It can be done for every PCI configuration using OF properties.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Fix sabre pci controllers with new probing scheme.

The SIMBA APB bridge is strange, it is a PCI bridge but it lacks
some standard OF properties, in particular it lacks a 'ranges'
property.

What you have to do is read the IO and MEM range registers in
the APB bridge to determine the ranges handled by each bridge.
So fill in the bus resources by doing that.

Since we now handle this quirk in the generic PCI and OF device
probing layers, we can flat out eliminate all of that code from
the sabre pci controller driver.

In fact we can thus eliminate completely another quirk of the sabre
driver.  It tried to make the two APB bridges look like PBMs but that
makes zero sense now (and it's questionable whether it ever made sense).
So now just use pbm_A and probe the whole PCI hierarchy using that as
the root.

This simplification allows many future cleanups to occur.

Also, I've found yet another quirk that needs to be worked around
while testing this.  You can't use the 'class-code' OF firmware
property, especially for IDE controllers.  We have to read the value
out of PCI config space or else we'll see the value the device was
showing before it was programmed into native mode.

I'm starting to think it might be wise to just read all of the values
out of PCI config space instead of using the OF properties. :-/

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Fix obppath pci device sysfs creation.

Need to traverse recursively down child busses else we only
get the file created under devices at the top-level.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Minor cleanups to schizo pci controller driver.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Internalize pci_memspace_mask.

The only user was bus_dvma_to_mem() which is no longer used
by any driver, so kill that, and the export of pci_memspace_mask.

The only user now is the PCI mmap support code.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Probe PCI bus using OF device tree.

Almost entirely taken from the 64-bit PowerPC PCI code.

This allowed to eliminate a ton of cruft from the sparc64
PCI layer.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64] isa: Convert to use pci_device_to_OF_node().

Also, do not try to compute resources by hand, instead use
the pre-computed ones in the of_device.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64] ebus: Convert to use pci_device_to_OF_node().

Also, we don't need to store or use the PBM so kill that
from the linux_ebus.

Signed-off-by: David S. Miller <davem@davemloft.net>

[IGAFB]: Use pci_device_to_OF_node() on sparc.

Also __sparc__ --> CONFIG_SPARC

Signed-off-by: David S. Miller <davem@davemloft.net>

[ATYFB]: Use pci_device_to_OF_node() in sparc.

Signed-off-by: David S. Miller <davem@davemloft.net>

[OPENPROM]: Use pci_device_to_OF_node().

Signed-off-by: David S. Miller <davem@davemloft.net>

[TULIP]: Use pci_device_to_OF_node() on sparc.

Signed-off-by: David S. Miller <davem@davemloft.net>

[TULIP]: Use CONFIG_SPARC consistently in ifdef tests.

Signed-off-by: David S. Miller <davem@davemloft.net>

[TG3]: Use pci_device_to_OF_node() on sparc.

And use CONFIG_SPARC instead of CONFIG_SPARC64 as the
test.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SUNHME]: Use pci_device_to_OF_node().

Signed-off-by: David S. Miller <davem@davemloft.net>

[SUNGEM]: Consolidate powerpc and sparc MAC probing code.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SUNGEM]: __sparc__ --> CONFIG_SPARC

Signed-off-by: David S. Miller <davem@davemloft.net>

[RADEON]: Probe clocks and monitor using OF properties on sparc.

Just like powerpc does.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC]: Use strcasecmp for OFW property name comparisons.

This allows us to simplify sharing code with powerpc which
has properties that have various forms of capitalization
when on the sparc64 side the property is all lower-case.

Signed-off-by: David S. Miller <davem@davemloft.net>

[STRING]: Move strcasecmp/strncasecmp to lib/string.c

We have several platforms using local copies of identical
code.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC]: constify some paramaters of OF routines

This starts bringing the PowerPC and Sparc implemetations back closer
together.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC/64]: constify of_get_property return

Finally, we actually change the functions themselves.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC/64] constify of_get_property return: sound

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64] constify of_get_property return: include

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC/64] constify of_get_property return: drivers

The only unfortunate bit here is that the name field of struct map_info
is not const, so for now we put a cast on the assignment of it.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: constify of_get_property return: arch/sparc64

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC]: constify of_get_property return: arch/sparc

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Small cleanups time.c

- Removes days_in_mo[], as it's almost identical to month_days[]
- Use the leapyear() macro
- Line length wrapping.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Fix sparc64_next_event() error return.

It should return an error code not a boolean.

Based upon an hpet timer fix by Thomas Gleixner.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Add clocksource/clockevents support.

I'd like to thank John Stul and others for helping
me along the way.

A lot of cleanups fell out of this.  For example, the get_compare()
tick_op was totally unused, so was deleted.  And the most often used
tick_op members were grouped together for cache-friendlyness.

The sparc64 TSC is given to the kernel as a one-shot timer.

tick_ops->init_timer() simply turns off the privileged bit in
the tick register (when possible), and disables the interrupt
by setting bit 63 in the compare register.  The ->disable_irq()
op also sets this bit.

tick_ops->add_compare() is changed to:

1) Add the given delta to "tick" not to "compare"
2) Return a boolean which, if true, means that the tick
   value read after writing the compare value was found
   to have incremented past the initial tick value.  This
   mirrors logic used in the HPET driver's ->next_event()
   method.

Each tick_ops implementation also now provides a name string.
And we feed this into the clocksource and clockevents layers.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Add tick_nohz_{stop,restart}_sched_tick() calls to cpu_idle().

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Unify timer interrupt handler.

Things were scattered all over the place, split between
SMP and non-SMP.

Unify it all so that dyntick support is easier to add.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Synchronize RTC clock via timer just like x86.

Signed-off-by: David S. Miller <davem@davemloft.net>

Linux 2.6.21

.. ok, enough waffling about it already. "Just do it!"

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [PARPORT] SUNBPP: Fix OOPS when debugging is enabled.
  [SPARC] openprom: Switch to ref counting PCI API

Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NETLINK]: Infinite recursion in netlink.

packet: fix error handling

The packet driver is assuming (reasonably) that the (undocumented)
request.errors is an errno.  But it is in fact some mysterious bitfield.  When
things go wrong we return weird positive numbers to the VFS as pointers and it
goes oops.

Thanks to William Heimbigner for reporting and diagnosis.

(It doesn't oops, but this driver still doesn't work for William)

Cc: William Heimbigner <icxcnika@mar.tar.cc>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[NETLINK]: Infinite recursion in netlink.

Reply to NETLINK_FIB_LOOKUP messages were misrouted back to kernel,
which resulted in infinite recursion and stack overflow.

The bug is present in all kernel versions since the feature appeared.

The patch also makes some minimal cleanup:

1. Return something consistent (-ENOENT) when fib table is missing
2. Do not crash when queue is empty (does not happen, but yet)
3. Put result of lookup

Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

cfq-iosched: fix alias + front merge bug

There's a really rare and obscure bug in CFQ, that causes a crash in
cfq_dispatch_insert() due to rq == NULL.  One example of the resulting
oops is seen here:

http://lkml.org/lkml/2007/4/15/41

Neil correctly diagnosed the situation for how this can happen: if two
concurrent requests with the exact same sector number (due to direct IO
or aliasing between MD and the raw device access), the alias handling
will add the request to the sortlist, but next_rq remains NULL.

Read the more complete analysis at:

http://lkml.org/lkml/2007/4/25/57

This looks like it requires md to trigger, even though it should
potentially be possible to due with O_DIRECT (at least if you edit the
kernel and doctor some of the unplug calls).

The fix is to move the ->next_rq update to when we add a request to the
rbtree. Then we remove the possibility for a request to exist in the
rbtree code, but not have ->next_rq correctly updated.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

IPv6: fix Routing Header Type 0 handling thinko

Oops, thinko.  The test for accempting a RH0 was exatly the wrong way
around.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [BNX2]: Fix occasional NETDEV WATCHDOG on 5709.
  [IPV6]: Disallow RH0 by default.
  [XFRM]: beet: fix pseudo header length value
  [TCP]: Congestion control initialization.

[BNX2]: Fix occasional NETDEV WATCHDOG on 5709.

Tweak a register setting to prevent the tx mailbox from halting.

Update version to 1.5.8.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: Disallow RH0 by default.

A security issue is emerging.  Disallow Routing Header Type 0 by default
as we have been doing for IPv4.
Note: We allow RH2 by default because it is harmless.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[MIPS] Fix oprofile logic to physical counter remapping

This did cause oprofile to fail on non-multithreaded systems with more
than 2 processors such as the BCM1480.

Reported by Manish Lachwani (mlachwani@mvista.com).

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  drivers/net/hamradio/baycom_ser_fdx build fix
  usb-net/pegasus: fix pegasus carrier detection
  sis900: Allocate rx replacement buffer before rx operation
  [netdrvr] depca: handle platform_device_add() failure

drivers/net/hamradio/baycom_ser_fdx build fix

sparc64:

drivers/net/hamradio/baycom_ser_fdx.c: In function `ser12_open':
drivers/net/hamradio/baycom_ser_fdx.c:417: error: `NR_IRQS' undeclared (first us
e in this function)
drivers/net/hamradio/baycom_ser_fdx.c:417: error: (Each undeclared identifier is
 reported only once
drivers/net/hamradio/baycom_ser_fdx.c:417: error: for each function it appears i
n.)

Cc: Folkert van Heusden <folkert@vanheusden.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

usb-net/pegasus: fix pegasus carrier detection

Broken by 4a1728a28a193aa388900714bbb1f375e08a6d8e which switched the
return semantics of read_mii_word() but didn't fix usage of
read_mii_word() to conform to the new semantics.

Setting carrier to off based on the NO_CARRIER flag is also incorrect as
that flag only triggers on TX failure and therefore isn't correct when
no frames are being transmitted.  Since there is already a 2*HZ MII
carrier check going on, defer to that.

Add a TRUST_LINK_STATUS feature flag for adapters where the LINK_STATUS
flag is actually correct, and use that rather than the NO_CARRIER flag.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

sis900: Allocate rx replacement buffer before rx operation

The sis900 driver appears to have a bug in which the receive routine
passes the skbuff holding the received frame to the network stack before
refilling the buffer in the rx ring.  If a new skbuff cannot be allocated, the
driver simply leaves a hole in the rx ring, which causes the driver to stop
receiving frames and become non-recoverable without an rmmod/insmod according to
reporters.  This patch reverses that order, attempting to allocate a replacement
buffer first, and receiving the new frame only if one can be allocated.  If no
skbuff can be allocated, the current skbuf in the rx ring is recycled, dropping
the current frame, but keeping the NIC operational.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

[netdrvr] depca: handle platform_device_add() failure

The following patch fixes a kernel bug in depca_platform_probe().

We don't use a dynamic pointer for pldev->dev.platform_data, so it seems
that the correct way to proceed if platform_device_add(pldev) fails is
to explicitly set the pldev->dev.platform_data pointer to NULL, before
calling the platform_device_put(pldev), or it will be kfree'ed by
platform_device_release().

Signed-off-by: Jeff Garzik <jeff@garzik.org>

Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6:
  [PATCH] i386: Fix some warnings added by earlier patch
  [PATCH] x86-64: Always flush all pages in change_page_attr
  [PATCH] x86: Remove noreplacement option
  [PATCH] x86-64: make GART PTEs uncacheable

Merge /pub/scm/linux/kernel/git/bart/ide-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6:
  Revert "adjust legacy IDE resource setting (v2)"

8250: fix possible deadlock between serial8250_handle_port() and serial8250_interrupt()

Commit 40b36daa introduced possibility that serial8250_backup_timeout() ->
serial8250_handle_port() locks port.lock without disabling irqs, thus
allowing deadlock against interrupt handler (port.lock is acquired in
serial8250_interrupt()).

Spotted by lockdep.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fault injection: add entry to MAINTAINERS

Add maintainer for fault injection support.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: icom, mark __init as __devinit

Two functions are called from __devinit context, but they are marked as
__init. Fix this.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

reiserfs: fix xattr root locking/refcount bug

The listxattr() and getxattr() operations are only protected by a read
lock.  As a result, if either of these operations run in parallel, a race
condition exists where the xattr_root will end up being cached twice, which
results in the leaking of a reference and a BUG() on umount.

This patch refactors get_xa_root(), __get_xa_root(), and create_xa_root(),
into one get_xa_root() function that takes the appropriate locking around
the entire critical section.

Reported, diagnosed and tested by Andrea Righi <a.righi@cineca.it>

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: Andrea Righi <a.righi@cineca.it>
Cc: "Vladimir V. Saveliev" <vs@namesys.com>
Cc: Edward Shishkin <edward@namesys.com>
Cc: Alex Zarochentsev <zam@namesys.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwmon/w83627ehf: Don't redefine REGION_OFFSET

On ia64, kernel headers define REGION_OFFSET so we can't use that.
Reported by Andrew Morton.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: David Hubbard <david.c.hubbard@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

do not truncate irq number for icom adapter

irq values are u32, not u8. Large irq numbers will be truncated,
free_irq may free a different irq.

Remove incorrectly sized struct member and use the one from pci_dev.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Allow reading tainted flag as user

The commit 34f5a39899f3f3e815da64f48ddb72942d86c366 restricted reading
of the tainted value. The attached patch changes this back to a
write-only check and restores the read behaviour of older versions.

Signed-off-by: Bastian Blank <bastian@waldi.eu.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

acpi-thermal: fix mod_timer() interval

Use relative time, not absolute.  Discovered by Jung-Ik (John) Lee
<jilee@google.com>.

Cc: Jung-Ik (John) Lee <jilee@google.com>
Acked-by: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

v9fs: don't use primary fid when removing file

v9fs_insert uses v9fs_fid_lookup (which also locks the fid) to get the
primary fid associated with the dentry and destroys the v9fs_fid struct
after removing the file.  If another process called v9fs_fid_lookup on the
same dentry, it may wait undefinitely for the fid's lock (as the struct is
freed).

This patch changes v9fs_remove to use a cloned fid, so the primary fid is
not locked and freed.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@hera.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ieee1394: update MAINTAINERS database

  - update Ben's address
  - replace Ben's contact by mine as raw1394's 2nd contact
  - eth1394's and pcilynx's maintenance doesn't really differ from that
    of other parts of the stack like video1394

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Ben Collins <ben.collins@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

page migration: fix NR_FILE_PAGES accounting

NR_FILE_PAGES must be accounted for depending on the zone that the page
belongs to.  If we replace the page in the radix tree then we may have to
shift the count to another zone.

Suggested-by: Ethan Solomita <solo@google.com>
Eventually-typed-in-by: Christoph Lameter <clameter@sgi.com>
Cc: Martin Bligh <mbligh@mbligh.org>
Cc: <stable@kernel.org>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix spelling in drivers/video/Kconfig

Signed-off-by: Miguel Ojeda Sandonis <maxextreme@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add mbuesch to .mailmap

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

paride drivers: initialize spinlocks

pcd_lock and pf_spin_lock are passed to blk_init_queue() which, seeing them
as valid lock pointer, sets it as ->queue_lock.

The problem is that pcd_lock and pf_spin_lock aren't initialized anywhere.

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: use lists.linux-foundation.org

Update various mailing list addresses to use "lists.linux-foundation.org"
instead of "lists.osdl.org", to help phase out the old addresses.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Taskstats fix the structure members alignment issue

We broke the the alignment of members of taskstats to the 8 byte boundary
with the CSA patches.  In the current kernel, the taskstats structure is
not suitable for use by 32 bit applications in a 64 bit kernel.

On x86_64

Offsets of taskstats' members (64 bit kernel, 64 bit application)

@taskstats'offsetof[@taskstats'indices] = (
        0,      # version
        4,      # ac_exitcode
        8,      # ac_flag
        9,      # ac_nice
        16,     # cpu_count
        24,     # cpu_delay_total
        32,     # blkio_count
        40,     # blkio_delay_total
        48,     # swapin_count
        56,     # swapin_delay_total
        64,     # cpu_run_real_total
        72,     # cpu_run_virtual_total
        80,     # ac_comm
        112,    # ac_sched
        113,    # ac_pad
        116,    # ac_uid
        120,    # ac_gid
        124,    # ac_pid
        128,    # ac_ppid
        132,    # ac_btime
        136,    # ac_etime
        144,    # ac_utime
        152,    # ac_stime
        160,    # ac_minflt
        168,    # ac_majflt
        176,    # coremem
        184,    # virtmem
        192,    # hiwater_rss
        200,    # hiwater_vm
        208,    # read_char
        216,    # write_char
        224,    # read_syscalls
        232,    # write_syscalls
        240,    # read_bytes
        248,    # write_bytes
        256,    # cancelled_write_bytes
    );

Offsets of taskstats' members (64 bit kernel, 32 bit application)

@taskstats'offsetof[@taskstats'indices] = (
        0,      # version
        4,      # ac_exitcode
        8,      # ac_flag
        9,      # ac_nice
        12,     # cpu_count
        20,     # cpu_delay_total
        28,     # blkio_count
        36,     # blkio_delay_total
        44,     # swapin_count
        52,     # swapin_delay_total
        60,     # cpu_run_real_total
        68,     # cpu_run_virtual_total
        76,     # ac_comm
        108,    # ac_sched
        109,    # ac_pad
        112,    # ac_uid
        116,    # ac_gid
        120,    # ac_pid
        124,    # ac_ppid
        128,    # ac_btime
        132,    # ac_etime
        140,    # ac_utime
        148,    # ac_stime
        156,    # ac_minflt
        164,    # ac_majflt
        172,    # coremem
        180,    # virtmem
        188,    # hiwater_rss
        196,    # hiwater_vm
        204,    # read_char
        212,    # write_char
        220,    # read_syscalls
        228,    # write_syscalls
        236,    # read_bytes
        244,    # write_bytes
        252,    # cancelled_write_bytes
    );

This is one way to solve the problem without re-arranging structure members
is to pack the structure.  The patch adds an __attribute__((aligned(8))) to
the taskstats structure members so that 32 bit applications using taskstats
can work with a 64 bit kernel.

Using __attribute__((packed)) would break the 64 bit alignment of members.

The fix was tested on x86_64. After the fix, we got

Offsets of taskstats' members (64 bit kernel, 64 bit application)

@taskstats'offsetof[@taskstats'indices] = (
        0,      # version
        4,      # ac_exitcode
        8,      # ac_flag
        9,      # ac_nice
        16,     # cpu_count
        24,     # cpu_delay_total
        32,     # blkio_count
        40,     # blkio_delay_total
        48,     # swapin_count
        56,     # swapin_delay_total
        64,     # cpu_run_real_total
        72,     # cpu_run_virtual_total
        80,     # ac_comm
        112,    # ac_sched
        113,    # ac_pad
        120,    # ac_uid
        124,    # ac_gid
        128,    # ac_pid
        132,    # ac_ppid
        136,    # ac_btime
        144,    # ac_etime
        152,    # ac_utime
        160,    # ac_stime
        168,    # ac_minflt
        176,    # ac_majflt
        184,    # coremem
        192,    # virtmem
        200,    # hiwater_rss
        208,    # hiwater_vm
        216,    # read_char
        224,    # write_char
        232,    # read_syscalls
        240,    # write_syscalls
        248,    # read_bytes
        256,    # write_bytes
        264,    # cancelled_write_bytes
    );

Offsets of taskstats' members (64 bit kernel, 32 bit application)

@taskstats'offsetof[@taskstats'indices] = (
        0,      # version
        4,      # ac_exitcode
        8,      # ac_flag
        9,      # ac_nice
        16,     # cpu_count
        24,     # cpu_delay_total
        32,     # blkio_count
        40,     # blkio_delay_total
        48,     # swapin_count
        56,     # swapin_delay_total
        64,     # cpu_run_real_total
        72,     # cpu_run_virtual_total
        80,     # ac_comm
        112,    # ac_sched
        113,    # ac_pad
        120,    # ac_uid
        124,    # ac_gid
        128,    # ac_pid
        132,    # ac_ppid
        136,    # ac_btime
        144,    # ac_etime
        152,    # ac_utime
        160,    # ac_stime
        168,    # ac_minflt
        176,    # ac_majflt
        184,    # coremem
        192,    # virtmem
        200,    # hiwater_rss
        208,    # hiwater_vm
        216,    # read_char
        224,    # write_char
        232,    # read_syscalls
        240,    # write_syscalls
        248,    # read_bytes
        256,    # write_bytes
        264,    # cancelled_write_bytes
    );

Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Jay Lan <jlan@engr.sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: mxser, fix TIOCMIWAIT

There was schedule() missing in the TIOCMIWAIT ioctl. Solve it by moving
the code to the wait_event_interruptible.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jan Yenya Kasprzak <kas@fi.muni.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: mxser_new, fix TIOCMIWAIT

There was schedule() missing in the TIOCMIWAIT ioctl.  Solve it by moving
the code to the wait_event_interruptible.

Cc: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: mxser_new, fix recursive locking

Signed-off-by: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix OOM killing processes wrongly thought MPOL_BIND

I only have CONFIG_NUMA=y for build testing: surprised when trying a memhog
to see lots of other processes killed with "No available memory
(MPOL_BIND)".  memhog is killed correctly once we initialize nodemask in
constrained_alloc().

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Acked-by: William Irwin <bill.irwin@oracle.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix possible NULL pointer access in 8250 serial driver

I encountered the following kernel panic.  The cause of this problem was
NULL pointer access in check_modem_status() in 8250.c.  I confirmed this
problem is fixed by the attached patch, but I don't know this is the
correct fix.

sadc[4378]: NaT consumption 2216203124768 [1]
Modules linked in: binfmt_misc dm_mirror dm_mod thermal processor fan
container button sg e100 eepro100 mii ehci_hcd ohci_hcd

    Pid: 4378, CPU 0, comm: sadc
    psr : 00001210085a2010 ifs : 8000000000000289 ip : [<a000000100482071>]
    Not tainted
    ip is at check_modem_status+0xf1/0x360

    Call Trace:
    [<a000000100013940>] show_stack+0x40/0xa0
    [<a0000001000145a0>] show_regs+0x840/0x880
    [<a0000001000368e0>] die+0x1c0/0x2c0
    [<a000000100036a30>] die_if_kernel+0x50/0x80
    [<a000000100037c40>] ia64_fault+0x11e0/0x1300
    [<a00000010000bdc0>] ia64_leave_kernel+0x0/0x280
    [<a000000100482070>] check_modem_status+0xf0/0x360
    [<a000000100482300>] serial8250_get_mctrl+0x20/0xa0
    [<a000000100478170>] uart_read_proc+0x250/0x860
    [<a0000001001c16d0>] proc_file_read+0x1d0/0x4c0
    [<a0000001001394b0>] vfs_read+0x1b0/0x300
    [<a000000100139cd0>] sys_read+0x70/0xe0
    [<a00000010000bc20>] ia64_ret_from_syscall+0x0/0x20
    [<a000000000010620>] __kernel_syscall_via_break+0x0/0x20

Fix the possible NULL pointer access in check_modem_status() in 8250.c.  The
check_modem_status() would access 'info' member of uart_port structure, but it
is not initialized before uart_open() is called.  The check_modem_status() can
be called through /proc/tty/driver/serial before uart_open() is called.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Taku Izumi <izumi2005@soft.fujitsu.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

oom: kill all threads that share mm with killed task

oom_kill_task() calls __oom_kill_task() to OOM kill a selected task.
When finding other threads that share an mm with that task, we need to
kill those individual threads and not the same one.

(Bug introduced by f2a2a7108aa0039ba7a5fe7a0d2ecef2219a7584)

Acked-by: William Irwin <bill.irwin@oracle.com>
Acked-by: Christoph Lameter <clameter@engr.sgi.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] i386: Fix some warnings added by earlier patch

Signed-off-by: Andi Kleen <ak@suse.de>

[PATCH] x86-64: Always flush all pages in change_page_attr

change_page_attr on x86-64 only flushed the TLB for pages that got
reverted. That's not correct: it has to be flushed in all cases.

This bug was added in some earlier changes.

Just flush all pages for now.

This could be done more efficiently, but for this late in the release
this seem to be the best fix.

Pointed out by Jan Beulich

Signed-off-by: Andi Kleen <ak@suse.de>

[PATCH] x86: Remove noreplacement option

noreplacement is dangerous on modern systems because it will not replace the
context switch FNSAVE with SSE aware FXSAVE. But other places in the kernel still assume
SSE and do FXSAVE and the CPU will then access FXSAVE information with
FNSAVE and cause corruption.

Easiest way to avoid this is to remove the option. It was mostly for paranoia
reasons anyways and alternative()s have been stable for some time.

Thanks to Jeremy F. for reporting and helping debug it.

Signed-off-by: Andi Kleen <ak@suse.de>

[PATCH] x86-64: make GART PTEs uncacheable

This patches fixes the silent data corruption problems being seen using the
GART iommu where 4kB of data where incorrect (seen mostly on Nvidia CK804
systems).  This fix, to mark the memory regin the GART PTEs reside on as
uncacheable, also brings the code in line with the AGP specification.

Signed-off-by: Joachim Deguara <joachim.deguara@amd.com>
Signed-off-by: Andi Kleen <ak@suse.de>

[PARPORT] SUNBPP: Fix OOPS when debugging is enabled.

The debugging code would dereference __iomem pointers instead
of going through sbus_{read,write}{b,w,l}().

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC] openprom: Switch to ref counting PCI API

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[XFRM]: beet: fix pseudo header length value

draft-nikander-esp-beet-mode-07.txt is not entirely clear on how the length
value of the pseudo header should be calculated, it states "The Header Length
field contains the length of the pseudo header, IPv4 options, and padding in
8 octets units.", but also states "Length in octets (Header Len + 1) * 8".
draft-nikander-esp-beet-mode-08-pre1.txt [1] clarifies this, the header length
should not include the first 8 byte.

This change affects backwards compatibility, but option encapsulation didn't
work until very recently anyway.

[1] http://users.piuha.net/jmelen/BEET/draft-nikander-esp-beet-mode-08-pre1.txt

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Congestion control initialization.

Change to defer congestion control initialization.

If setsockopt() was used to change TCP_CONGESTION before
connection is established, then protocols that use sequence numbers
to keep track of one RTT interval (vegas, illinois, ...) get confused.

Change the init hook to be called after handshake.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "adjust legacy IDE resource setting (v2)"

This reverts commit ed8ccee0918ad063a4741c0656fda783e02df627.

It causes hang on boot for some users and we don't yet know why:

http://bugzilla.kernel.org/show_bug.cgi?id=7562

http://lkml.org/lkml/2007/4/20/404
http://lkml.org/lkml/2007/3/25/113

Just reverse it for 2.6.21-final, having broken X server is somehow
better than unbootable system.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add missing USRobotics Wireless Adapter (Model 5423) id into zd1211rw

USRobotics Wireless Adapter (Model 5423) works well with current
zd1211rw driver also (i have tested 2.6.18, 2.6.20 and 2.6.21-rc7).

It just needs its ID added to the list of devices.

Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SUNHME]: Fix module unload.
  [SUNLANCE]: Fix module unload.
  [SUNQE]: Fix MAC address assignment.
  [SBUS] vfc_dev.c: kzalloc

Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [PPP]: Fix skbuff.c:BUG due incorrect logic in process_input_packet()

[SUNHME]: Fix module unload.

Signed-off-by: Marcel van Nies <morcles@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SUNLANCE]: Fix module unload.

Signed-off-by: Marcel van Nies <morcles@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SUNQE]: Fix MAC address assignment.

The MAC address assignment at module loading is simply forgotten.
The bug at module unloading is caused by an incorrect call.

The bug at module unloading does not only happen for sunqe,
sunlance and sunhme (sbus) suffer from it too.

I've tested this on my SS20.

Signed-off-by: Marcel van Nies <morcles@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SBUS] vfc_dev.c: kzalloc

Replacing kmalloc/memset combination with kzalloc.

Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>