xen_play_dead() is __cpuinit

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

xen_setup_vcpu_info_placement() is not init on x86

... so get xen-ops.h in agreement with xen/smp.c

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kvm_setup_secondary_clock() is cpuinit

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

enable_IR_x2apic() needs to be __init

calls __init, called only from __init

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pci_setup() is init, not devinit

for fsck sake, it's used only when parsing kernel command line...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

alpha: pcibios_resource_to_bus() is callable from normal code

pci_enable_rom(), specifically.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tricky one: hisax sections

a) hisax_init_pcmcia() needs to be defined only if we have
   CONFIG_HOTPLUG (no PCMCIA support otherwise) and can be declared
   __devinit.

b) HiSax_inithardware() can go __init

c) hisax_register() is passing to checkcard() full-blown hisax_cs_setup_card():
checkcard(i, id, NULL, hisax_d_if->owner, hisax_cs_setup_card);
   The problem with it is that
* hisax_cs_setup_card() is __devinit
* hisax_register() is not
* hisax_cs_setup_card() is a switch from hell, calling a lot of
  setup_some_weirdcard() depending on card->typ.  _These_ are also
  __devinit.

   However, in hisax_register() we have card->typ equal to
   ISDN_CTYPE_DYNAMIC, which reduces hisax_cs_setup_card() to "nevermind
   all that crap, just do nothing and return 2".  So we add a
   trimmed-down callback doing just that and passed to checkcard() by
   hisax_register().  _This_ is non-init (we can stand the impact on
   .text size).

Voila - no section warnings from drivers/isdn

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpuinit fixes in kernel/*

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uninorth-agp section mess

'aperture' is declared devinitdata (the whole word of it) and
is used from ->fetch_size() which can, AFAICS, be used on
!HOTPLUG after init time.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rapidio section noise

functions calling devinit and called only from devinit

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

section errors in smc911x/smc91x

a) ->probe() can be __devinit; no need to put it into .text
 b) calling __init stuff from it, OTOH, is wrong
 c) ->remove() is __devexit fodder

Acked-by: rmk+kernel@arm.linux.org.uk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix the section noise in sparc head.S

usual .text.head trick

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m32r: section noise in head.S

usual "introduce .text.head, put it in front of TEXT_TEXT in vmlinux.lds.S,
make the stuff up to jump to start_kernel live in it", same as on other
targets.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

section misannotation in ibmtr_cs

ibmtr_resume() is calling ibmtr_probe(), which is devinit.  Whether
that's the right thing to do there is a separate question, but
since it's PCMCIA and thus will never compile without HOTPLUG...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ixgbe section fixes

ixgbe_init_interrupt_scheme() is called from ixgbe_resume().  Build that
with CONFIG_PM and without CONFIG_HOTPLUG and you've got a problem.
Several helpers called by it also are misannotated __devinit.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rackmeter section fixes

* rackmeter_remove() reference needs devexit_p
 * rackmeter_setup() is calls devinit and is called only from devinit

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gdth section fixes

PCI side of driver should be devinit, not init

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

of_platform_driver noise on sparce

switch to __init for those; unlike powerpc sparc has no hotplug support
for that stuff and their ->probe() tends to call __init functions while
being declared __devinit.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

advansys fix on ISA-less configs

The code

        if (shost->dma_channel != NO_ISA_DMA)
                free_dma(shost->dma_channel);

in there is triggerable only if we have CONFIG_ISA (we only set ->dma_channel to
something other than NO_ISA_DMA under #ifdef CONFIG_ISA).  OTOH, free_dma() is
not guaranteed to be there in absense of CONFIG_ISA.  IOW, driver runs into
undefined symbols on PCI-but-not-ISA configs (e.g. on frv) and it's a false
positive.

Fix: put the entire if () under #ifdef CONFIG_ISA; behaviour doesn't change and
dependency on free_dma() disappears for !CONFIG_ISA.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

W1_MASTER_DS1WM should depend on HAVE_CLK

Uses clk_...() a lot

Acked-by: rmk+kernel@arm.linux.org.uk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

icside section warnings

icside_register_v[56] is called from (__devinit) icside_probe

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix talitos

talitos_remove() can be called from talitos_probe() on failure
exit path, so it can't be __devexit.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

istallion section warnings

stli_findeisabrds() and stli_initbrds() are using __init and called only
from __init.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sparc64 trivial section misannotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sparc32 cpuinit flase positives

All noise since we don't have CPU hotplug there.  However, they
did expose something very odd-looking in there - poke_viking()
does a bunch of identical btfixup each time it's called (i.e.
for each CPU).  That one is left alone for now; just the trivial
misannotation fixes.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc set_huge_psize() false positive

called only from __init, calls __init.  Incidentally, it ought to be static
in file.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

false __cpuinit positives on alpha

pure noise - alpha doesn't have CPU hotplug

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

meminit section warnings

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5330/1: mach-pxa: Fixup reset for systems using reboot=cold or other strings
  [ARM] pxa: fix incorrect PCMCIA PSKTSEL pin configuration for spitz
  [ARM] pxa: fix I2C controller device being registered twice on Akita
  pxafb: only initialize the smart panel thread when dealing with a smartpanel
  pxafb: introduce LCD_TYPE_MASK and use it.

Linux 2.6.28-rc6

Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] xen: fix xen_get_eflags.
  [IA64] ia64/pv_ops/pv_cpu_ops: fix _IA64_REG_IP case.
  [IA64] remove duplicate include iommu.h
  [IA64] use mprintk instead of printk, in ia64_mca_modify_original_stack
  [IA64] Rationalize kernel mode alignment checking

Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: ACE1001 patch for cp2101.c
  USB: usbmon: fix read(2)
  USB: gadget rndis: send notifications
  USB: gadget rndis: stop windows self-immolation
  USB: storage: update unusual_devs entries for Nokia 5300 and 5310
  USB: storage: updates unusual_devs entry for the Nokia 6300
  usb: musb: fix bug in musb_schedule
  USB: fix SB700 usb subsystem hang bug

[IA64] xen: fix xen_get_eflags.

fix xen_get_eflags. It doesn't take any argument.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] ia64/pv_ops/pv_cpu_ops: fix _IA64_REG_IP case.

pv_cpu_ops.getreg(_IA64_REG_IP) returned constant.
But the returned ip valued should be the one in the caller, not of the callee.
This patch fixes that.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] remove duplicate include iommu.h

arch/ia64/kernel/pci-dma.c only needs to include iommu once.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] use mprintk instead of printk, in ia64_mca_modify_original_stack

Using printk from MCA/INIT context is unsafe since it can cause deadlock.
The ia64_mca_modify_original_stack is called from both of mca handler and
init handler, so it should use mprintk instead of printk.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] Rationalize kernel mode alignment checking

Itanium processors can handle some misaligned data accesses. They
also provide a mode where all such accesses are forced to trap. The
kernel was schizophrenic about use of this mode:

* Base kernel code ran in permissive mode where the only traps
  generated were from those cases that the h/w could not handle.
* Interrupt, syscall and trap code ran in strict mode where all
  unaligned accesses caused traps to the 0x5a00 unaligned reference
  vector.

Use strict alignment checking throughout the kernel, but make
sure that we continue to let user mode use more relaxed mode
as the default.

Signed-off-by: Tony Luck <tony.luck@intel.com>

x86: Fix interrupt leak due to migration

When we migrate an interrupt from one CPU to another, we set the
move_in_progress flag and clean up the vectors later once they're not
being used.  If you're unlucky and call destroy_irq() before the vectors
become un-used, the move_in_progress flag is never cleared, which causes
the interrupt to become unusable.

This was discovered by Jesse Brandeburg for whom it manifested as an
MSI-X device refusing to use MSI-X mode when the driver was unloaded
and reloaded repeatedly.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SUNRPC: Fix a performance regression in the RPC authentication code

Fix a regression reported by Max Kellermann whereby kernel profiling
showed that his clients were spending 45% of their time in
rpcauth_lookup_credcache.

It turns out that although his processes had identical uid/gid/groups,
generic_match() was failing to detect this, because the task->group_info
pointers were not shared. This again lead to the creation of a huge number
of identical credentials at the RPC layer.

The regression is fixed by comparing the contents of task->group_info
if the actual pointers are not identical.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Do not attempt to close invalidated file handles
  [CIFS] fix check for dead tcon in smb_init

Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: csrc-r4k: Fix declaration depending on the wrong CONFIG_ symbol.
  MIPS: csrc-r4k: Fix spelling mistake.
  MIPS: RB532: Provide functions for gpio configuration
  MIPS: IP22: Make indy_sc_ops variable static
  MIPS: RB532: GPIO register offsets are relative to GPIOBASE
  MIPS: Malta: Fix include paths in malta-amon.c

Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  intel-iommu: fix compile warnings

Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (23 commits)
  net: fix tiny output corruption of /proc/net/snmp6
  atl2: don't request irq on resume if netif running
  ipv6: use seq_release_private for ip6mr.c /proc entries
  pkt_sched: fix missing check for packet overrun in qdisc_dump_stab()
  smc911x: Fix printf format typo in smc911x driver.
  asix: Fix asix-based cards connecting to 10/100Mbs LAN.
  mv643xx_eth: fix recycle check bound
  mv643xx_eth: fix the order of mdiobus_{unregister, free}() calls
  sh: sh_eth: Update to change of mii_bus
  TPROXY: supply a struct flowi->flags argument in inet_sk_rebuild_header()
  TPROXY: fill struct flowi->flags in udp_sendmsg()
  net: ipg.c fix bracing on endian swapping
  phylib: Fix auto-negotiation restart avoidance
  net: jme.c rxdesc.flags is __le16, other missing endian swaps
  phylib: fix phy name example in documentation
  net: Do not fire linkwatch events until the device is registered.
  phonet: fix compilation with gcc-3.4
  ixgbe: fix compilation with gcc-3.4
  pktgen: fix multiple queue warning
  net: fix ip_mr_init() error path
  ...

Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ftrace: fix dyn ftrace filter selection
  ftrace: make filtered functions effective on setting
  ftrace: fix set_ftrace_filter
  trace: introduce missing mutex_unlock()
  tracing: kernel/trace/trace.c: introduce missing kfree()

Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: uaccess_64: fix return value in __copy_from_user()
  x86: quirk for reboot stalls on a Dell Optiplex 330

parisc: fix bug in compat_arch_ptrace

Commit 81e192d6ce303b6792aa38ff35f41a1a7357f23a ("parisc: convert to
generic compat_sys_ptrace") introduced a bug which segfaults the parisc
64bit kernel when stracing 32bit applications:

  Kernel Fault: Code=15 regs=00000000bafa42b0 (Addr=00000001baf5ab57)
       YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
  PSW: 00001000000001101111111100001011 Tainted: G        W
  r00-03  000000ff0806ff0b 000000004068edc0 00000000401203f8 00000000fb3e2508
  r04-07  0000000040686dc0 00000000baf5a800 fffffffffffffffc fffffffffb3e2508
  r08-11  00000000baf5a800 000000000004b068 00000000000402b0 0000000000040d68
  r12-15  0000000000042a9c 0000000000040a9c 0000000000040d60 0000000000042e9c
  r16-19  000000000004b060 000000000004b058 0000000000042d9c ffffffffffffffff
  r20-23  000000000800000b 0000000000000000 000000000800000b fffffffffb3e2508
  r24-27  00000000fffffffc 0000000000000003 00000000fffffffc 0000000040686dc0
  r28-31  00000001baf5a7ff 00000000bafa4280 00000000bafa42b0 00000000000001d7
  sr00-03  0000000000fca000 0000000000000000 0000000000000000 0000000000fca000
  sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000

  IASQ: 0000000000000000 0000000000000000 IAOQ: 0000000040120400 0000000040120404
   IIR: 4b9a06b0    ISR: 0000000000000000  IOR: 00000001baf5ab57
   CPU:        0   CR30: 00000000bafa4000 CR31: 00000000d22344e0
   ORIG_R28: 00000000fb3e2248
   IAOQ[0]: compat_arch_ptrace+0xb8/0x160
   IAOQ[1]: compat_arch_ptrace+0xbc/0x160
   RP(r2): compat_arch_ptrace+0xb0/0x160
  Backtrace:
   [<00000000401612ac>] compat_sys_ptrace+0x15c/0x180
   [<0000000040104ef8>] syscall_exit+0x0/0x14

The problem is that compat_arch_ptrace() enters with an addr value of
type compat_ulong_t and calls translate_usr_offset() to translate the
address offset into a struct pt_regs offset like this:

addr = translate_usr_offset(addr)

this means that any return value of translate_usr_offset() is stored
back as compat_ulong_t type into the addr variable.

But since translate_usr_offset() returns -1 for invalid offsets, addr
can now get the value 0xffffffff which then fails the next return-value
sanity check and thus the kernel tries to access invalid memory:

if (addr < 0)
break;

Fix this bug by modifying translate_usr_offset() to take and return
values of type compat_ulong_t, and by returning the value
"sizeof(struct pt_regs)" as an error indicator.

Additionally change the sanity check to check for return values
for >= sizeof(struct pt_regs).

This patch survived my compile and run-tests.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[CIFS] Do not attempt to close invalidated file handles

If a connection with open file handles has gone down
and come back up and reconnected without reopening
the file handle yet, do not attempt to send an SMB close
request for this handle in cifs_close.  We were
checking for the connection being invalid in cifs_close
but since the connection may have been reconnected
we also need to check whether the file handle
was marked invalid (otherwise we could close the
wrong file handle by accident).

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

MIPS: csrc-r4k: Fix declaration depending on the wrong CONFIG_ symbol.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: csrc-r4k: Fix spelling mistake.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: RB532: Provide functions for gpio configuration

As gpiolib doesn't support pin multiplexing, it provides no way to
access the GPIOFUNC register. Also there is no support for setting
interrupt status and level. These functions provide access to them and
are needed by the CompactFlash driver.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: IP22: Make indy_sc_ops variable static

The indy_sc_ops variable in arch/mips/mm/sc-ip22.c is needlessly defined
global, and this patch makes it static.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---

MIPS: RB532: GPIO register offsets are relative to GPIOBASE

This patch fixes the wrong use of GPIO register offsets
in devices.c. To avoid further problems, use gpio_get_value
to return the NAND status instead of our own expanded code.

Also define the zero offset of the alternate function register to allow
consistent access.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Malta: Fix include paths in malta-amon.c

On linux-queue, malta doesn't build after the include file relocation.
This should fix it.

There some occurrences of 'asm-mips' in the comments of quite a few
files, but this is the only place I found it in any code.

Signed-off-by: David Daney <ddaney@avtrex.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

net: fix tiny output corruption of /proc/net/snmp6

Because "name" is static, it can be occasionally be filled with
somewhat garbage if two processes read /proc/net/snmp6.

Also, remove useless casts and "-1" -- snprintf() correctly terminates it's
output.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

atl2: don't request irq on resume if netif running

If the device is suspended with the cable disconnected, then
resumed with the cable connected, dev->open is called before
resume. During resume, we request an IRQ, but the IRQ was
already assigned during dev->open, resulting in the warning
shown below.

Don't request an IRQ if the device is running.

Call Trace:
 [<c011b89a>] warn_on_slowpath+0x40/0x59
 [<c023df15>] raw_pci_read+0x4d/0x55
 [<c023dff3>] pci_read+0x1c/0x21
 [<c01bcd81>] __pci_find_next_cap_ttl+0x44/0x70
 [<c01bce86>] __pci_find_next_cap+0x1a/0x1f
 [<c01bcef9>] pci_find_capability+0x28/0x2c
 [<c01c4144>] pci_msi_check_device+0x53/0x62
 [<c01c49c2>] pci_enable_msi+0x3a/0x1cd
 [<e019f17b>] atl2_write_phy_reg+0x40/0x5f [atl2]
 [<c01061b1>] dma_generic_alloc_coherent+0x0/0xd7
 [<e019f107>] atl2_request_irq+0x15/0x49 [atl2]
 [<e01a1481>] atl2_open+0x20b/0x297 [atl2]
 [<c024a35c>] dev_open+0x62/0x91
 [<c0248b9a>] dev_change_flags+0x93/0x141
 [<c024f308>] do_setlink+0x238/0x2d5
 [<c02501b2>] rtnl_setlink+0xa9/0xbf
 [<c0297f0c>] mutex_lock+0xb/0x19
 [<c024ffa7>] rtnl_dump_ifinfo+0x0/0x69
 [<c0250109>] rtnl_setlink+0x0/0xbf
 [<c024fe42>] rtnetlink_rcv_msg+0x185/0x19f
 [<c0240fd1>] sock_rmalloc+0x23/0x57
 [<c024fcbd>] rtnetlink_rcv_msg+0x0/0x19f
 [<c0259457>] netlink_rcv_skb+0x2d/0x71
 [<c024fcb7>] rtnetlink_rcv+0x14/0x1a
 [<c025929e>] netlink_unicast+0x184/0x1e4
 [<c025992a>] netlink_sendmsg+0x233/0x240
 [<c023f405>] sock_sendmsg+0xb7/0xd0
 [<c0129131>] autoremove_wake_function+0x0/0x2b
 [<c0129131>] autoremove_wake_function+0x0/0x2b
 [<c0147796>] mempool_alloc+0x2d/0x9e
 [<c020c923>] scsi_pool_alloc_command+0x35/0x4f
 [<c0297f0c>] mutex_lock+0xb/0x19
 [<c028e867>] unix_stream_recvmsg+0x357/0x3e2
 [<c01b81c9>] copy_from_user+0x23/0x4f
 [<c02452ea>] verify_iovec+0x3e/0x6c
 [<c023f5ab>] sys_sendmsg+0x18d/0x1f0
 [<c023ffa8>] sys_recvmsg+0x146/0x1c8
 [<c0240016>] sys_recvmsg+0x1b4/0x1c8
 [<c0118f48>] __wake_up+0xf/0x15
 [<c02586cd>] netlink_table_ungrab+0x17/0x19
 [<c01b83ba>] copy_to_user+0x25/0x3b
 [<c023fe4a>] move_addr_to_user+0x50/0x68
 [<c0240266>] sys_getsockname+0x6f/0x9a
 [<c0240280>] sys_getsockname+0x89/0x9a
 [<c015046a>] do_wp_page+0x3ae/0x41a
 [<c0151525>] handle_mm_fault+0x4c5/0x540
 [<c02405d0>] sys_socketcall+0x176/0x1b0
 [<c010376d>] sysenter_do_call+0x12/0x21

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Jay Cliburn <jcliburn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: use seq_release_private for ip6mr.c /proc entries

In ip6mr.c, /proc entries /proc/net/ip6_mr_cache and /proc/net/ip6_mr_vif
are opened with seq_open_private(), thus seq_release_private() should be
used to release them.
Should fix a small memory leak.

Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

pkt_sched: fix missing check for packet overrun in qdisc_dump_stab()

nla_nest_start() might return NULL, causing a NULL pointer dereference.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

smc911x: Fix printf format typo in smc911x driver.

Signed-off-by: Vernon Sauder <VernonInHand@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

asix: Fix asix-based cards connecting to 10/100Mbs LAN.

Add AX_MEDIUM_ENCK also when speed = 10/100Mbps. This allows my belkin
f5d5055 to work with my 100Mbps switch and with an old 10Mbps ISA card.
Without this patch, the card is recognized and the interface is brought
up fine, but no packets actually flow through the interface.

Signed-off-by: Pantelis Koukousoulas <pktoss@gmail.com>
Acked-by: David Hollis <dhollis@davehollis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mv643xx_eth: fix recycle check bound

When mv643xx_eth allocates skbuffs, it adds
'dma_get_cache_alignment() - 1' to the length it needs, so that it can
align the skb's ->data pointer to a cache boundary.  When checking
whether a transmitted skbuff can be reused as a receive buffer, these
bytes needs to be included into the minimum bound for the recycle check.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mv643xx_eth: fix the order of mdiobus_{unregister, free}() calls

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sh: sh_eth: Update to change of mii_bus

Update to change of mii_bus interface and fix some warning.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TPROXY: supply a struct flowi->flags argument in inet_sk_rebuild_header()

    inet_sk_rebuild_header() does a new route lookup if the dst_entry
    associated with a socket becomes stale. However inet_sk_rebuild_header()
    didn't use struct flowi->flags, causing the route lookup to
    fail for foreign-bound IP_TRANSPARENT sockets, causing an error
    state to be set for the sockets in question.

Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

TPROXY: fill struct flowi->flags in udp_sendmsg()

    udp_sendmsg() didn't fill struct flowi->flags, which means that
    the route lookup would fail for non-local IPs even if the
    IP_TRANSPARENT sockopt was set.

    This prevents sendto() to work properly for UDP sockets, whereas
    bind(foreign-ip) + connect() + send() worked fine.

Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

USB: ACE1001 patch for cp2101.c

The patch which adds IDs for AKTAKOM USB->RS232 cable
(http://www.aktakom.ru/product/kio/ace-1001.htm) is attached.

From: M Kondrin <mkondrin@hppi.troitsk.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: usbmon: fix read(2)

There's a bug in the usbmon binary reader: When using read() to fetch
the packets and a packet's data is partially read, the next read call
will once again return up to len_cap bytes of data. The b_read counter
is not regarded when determining the remaining chunk size.

So, when dumping USB data with "cat /dev/usbmon0 > usbmon.trace" while
reading from a USB storage device and analyzing the dump file
afterwards it will get out of sync after a couple of packets.

Signed-off-by: Ingo van Lil <inguin@gmx.de>
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: gadget rndis: send notifications

It turns out that atomic_inc_return() returns the *new* value
not the original one, so the logic in rndis_response_available()
kept the first RNDIS response notification from getting out.
This prevented interoperation with MS-Windows (but not Linux).

Fix this to make RNDIS behave again.

Signed-off-by: Richard Röjfors <richard.rojfors@endian.se>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: gadget rndis: stop windows self-immolation

Somewhere in the conversion of the RNDIS gadget code to the new
framework, the descriptor of its data interface seems to have
been copied from the CDC Ethernet driver.  Unfortunately that
means it got a nonzero altsetting ... which is incorrect.  Issue
uncovered by Richard Röjfors <richard.rojfors@endian.se>.

This patch fixes that problem, and resolves at least some cases
of Windows XP bluescreening itself.

Tested-by: Richard Röjfors <richard.rojfors@endian.se>.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: storage: update unusual_devs entries for Nokia 5300 and 5310

This patch (as1168) updates the unusual_devs entry for the Nokia 5300.
According to Jorge Lucangeli Obes <t4m5yn@gmail.com>, some existing
models have a revision number lower than the lower limit of the
current entry.

The patch also moves the entry for the Nokia 5310 to its correct place
in the file.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: storage: updates unusual_devs entry for the Nokia 6300

This patch (as1169) modifies the unusual_devs entry for the Nokia
6300.  According to Maciej Gierok <mgierok@gmail.com> and David
McBride <dwm@doc.ic.ac.uk>, the revision limits need to be wider.

This fixes Bugzilla #11768.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb: musb: fix bug in musb_schedule

This bug was introduced recently. Fix it before bigger
problems appear.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: fix SB700 usb subsystem hang bug

This patch is required for AMD SB700 south bridge revision A12 and A13 to avoid
USB subsystem hang symptom. The USB subsystem hang symptom is observed when the
system has multiple USB devices connected to it. In some cases a USB hub may be
required to observe this symptom.

This patch works around the problem by correcting the internal register setting
that will help by changing the behavior of the internal logic to avoid the
USB subsystem hang issue. The change in the behavior of the logic does not
impact the normal operation of the USB subsystem.

Reported-by: Volker Armin Hemmann <volker.armin.hemmann@tu-clausthal.de>
Tested-by: Volker Armin Hemmann <volker.armin.hemmann@tu-clausthal.de>
Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Libin Yang <libin.yang@amd.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: Fix disable IRQ 0 in pci_reset_function()

Merge branch 'x86/numa' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86/numa' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: make NUMA on 32-bit depend on EXPERIMENTAL again
  x86, hibernate: fix breakage on x86_32 with CONFIG_NUMA set

Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: more general identifier for Phoenix BIOS
  AMD IOMMU: check for next_bit also in unmapped area
  AMD IOMMU: fix fullflush comparison length
  AMD IOMMU: enable device isolation per default
  AMD IOMMU: add parameter to disable device isolation
  x86, PEBS/DS: fix code flow in ds_request()
  x86: add rdtsc barrier to TSC sync check
  xen: fix scrub_page()
  x86: fix es7000 compiling
  x86, bts: fix unlock problem in ds.c
  x86, voyager: fix smp generic helper voyager breakage
  x86: move iomap.h to the new include location

cciss: fix DEBUG printk formats

Fix printk format warnings when CCISS_DEBUG is defined.

drivers/block/cciss.c:2856: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int'
drivers/block/cciss.c:3205: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'long unsigned int'
drivers/block/cciss.c:3236: warning: format '%x' expects type 'unsigned int', but argument 2 has type '__u64'
drivers/block/cciss.c:3246: warning: format '%x' expects type 'unsigned int', but argument 2 has type '__u64'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

W1 OMAP: Fix OMAP LDP boot crash

OMAP LDP boot crash.  This is because w1 subsystem changed the search
interface, so update omap_hdq's search interface to follow the change.

Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/da903x.c: introduce one more missing kfree

One more error handling code should have kfree as well

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroups: fix a serious bug in cgroupstats

Try this, and you'll get oops immediately:
 # cd Documentation/accounting/
 # gcc -o getdelays getdelays.c
 # mount -t cgroup -o debug xxx /mnt
 # ./getdelays -C /mnt/tasks

Because a normal file's dentry->d_fsdata is a pointer to struct cftype,
not struct cgroup.

After the patch, it returns EINVAL if we try to get cgroupstats
from a normal file.

Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hostfs: fix a duplicated global function name

fs/hostfs/hostfs_user.c defines do_readlink() as non-static, and so does
fs/xfs/linux-2.6/xfs_ioctl.c when CONFIG_XFS_DEBUG=y.  So rename
do_readlink() in hostfs to hostfs_do_readlink().

I think it's better if XFS guys will also rename their do_readlink(),
it's not necessary to use such a general name.

Signed-off-by: WANG Cong <wangcong@zeuux.org>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: remove unused variables

After commit a1d35a7a (cirrusfb: use modedb and add mode_option
parameter), these variables are no longer used, so remove them to fix
compilation warning.

Signed-off-by: Vlada Periæ <vlada.peric@gmail.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmscan: fix get_scan_ratio() comment

Fix the old comment on the scan ratio calculations.

Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: change email address for rostedt

I find that I answer my email quicker on my home email account, than I do
on my work email.  Not to mention that I never check my work email while
traveling.  Please change my email address in the MAINTAINERS file from
srostedt@redhat.com to rostedt@goodmis.org.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/hwmon/applesmc.c: add generic MacPro support

In order to analyze the SMC of the newer MacPros, applesmc needs to
recognize the machine.  This patch adds the missing generic dmi_match
entry for MacPro models.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/da903x.c: introduce missing kfree

Error handling code following a kzalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,l;
position p1,p2;
expression *ptr != NULL;
@@

(
if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S
|
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
)
<... when != x
     when != if (...) { <+...x...+> }
x->f = E
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Mike Rapoport <mike@compulab.co.il>
Cc: Richard Purdie <rpurdie@linux.intel.com>
Cc: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

don't unlink an active swapfile

Peter Cordes is sorry that he rm'ed his swapfiles while they were in use,
he then had no pathname to swapoff.  It's a curious little oversight, but
not one worth a lot of hackery.  Kudos to Willy Tarreau for turning this
around from a discussion of synthetic pathnames to how to prevent unlink.
Mimic immutable: prohibit unlinking an active swapfile in may_delete()
(and don't worry my little head over the tiny race window).

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Willy Tarreau <w@1wt.eu>
Acked-by: Christoph Hellwig <hch@infradead.org>
Cc: Peter Cordes <peter@cordes.ca>
Cc: Bodo Eggert <7eggert@gmx.de>
Cc: David Newall <davidn@davidnewall.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmscan: let GFP_NOFS go to swap again

In the past, GFP_NOFS (but of course not GFP_NOIO) was allowed to reclaim
by writing to swap.  That got partially broken in 2.6.23, when may_enter_fs
initialization was moved up before the allocation of swap, so its
PageSwapCache test was failing the first time around,

Fix it by setting may_enter_fs when add_to_swap() succeeds with
__GFP_IO.  In fact, check __GFP_IO before calling add_to_swap():
allocating swap we're not ready to use just increases disk seeking.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

migration: fix writepage error

Page migration's writeout() has got understandably confused by the nasty
AOP_WRITEPAGE_ACTIVATE case: as in normal success, a writepage() error has
unlocked the page, so writeout() then needs to relock it.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sprint_symbol(): use less stack

sprint_symbol(), itself used when dumping stacks, has been wasting 128
bytes of stack: lookup the symbol directly into the buffer supplied by the
caller, instead of using a locally declared namebuf.

I believe the name != buffer strcpy() is obsolete: the design here dates
from when module symbol lookup pointed into a supposedly const but sadly
volatile table; nowadays it copies, but an uncalled strcpy() looks better
here than the risk of a recursive BUG_ON().

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroup: fix potential deadlock in pre_destroy

As Balbir pointed out, memcg's pre_destroy handler has potential deadlock.

It has following lock sequence.

cgroup_mutex (cgroup_rmdir)
    -> pre_destroy -> mem_cgroup_pre_destroy-> force_empty
-> cpu_hotplug.lock. (lru_add_drain_all->
      schedule_work->
                                      get_online_cpus)

But, cpuset has following.
cpu_hotplug.lock (call notifier)
-> cgroup_mutex. (within notifier)

Then, this lock sequence should be fixed.

Considering how pre_destroy works, it's not necessary to holding
cgroup_mutex() while calling it.

As a side effect, we don't have to wait at this mutex while memcg's
force_empty works.(it can be long when there are tons of pages.)

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: vmalloc search restart fix

Current vmalloc restart search for a free area in case we can't find one.
The reason is there are areas which are lazily freed, and could be
possibly freed now.  However, current implementation start searching the
tree from the last failing address, which is pretty much by definition at
the end of address space.  So, we fail.

The proposal of this patch is to restart the search from the beginning of
the requested vstart address.  This fixes the regression in running KVM
virtual machines for me, described in http://lkml.org/lkml/2008/10/28/349,
caused by commit db64fe02258f1507e13fe5212a989922323685ce.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: vmalloc failure flush fix

An initial vmalloc failure should start off a synchronous flush of lazy
areas, in case someone is in progress flushing them already, which could
cause us to return an allocation failure even if there is plenty of KVA
free.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: vmalloc allocator off by one

Fix off by one bug in the KVA allocator that can leave gaps in the address
space.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpuset: update top cpuset's mems after adding a node

After adding a node into the machine, top cpuset's mems isn't updated.

By reviewing the code, we found that the update function

  cpuset_track_online_nodes()

was invoked after node_states[N_ONLINE] changes.  It is wrong because
N_ONLINE just means node has pgdat, and if node has/added memory, we use
N_HIGH_MEMORY.  So, We should invoke the update function after
node_states[N_HIGH_MEMORY] changes, just like its commit says.

This patch fixes it.  And we use notifier of memory hotplug instead of
direct calling of cpuset_track_online_nodes().

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Paul Menage <menage@google.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: Allocate up to two scatterlists for crypto ops on keys

I have received some reports of out-of-memory errors on some older AMD
architectures.  These errors are what I would expect to see if
crypt_stat->key were split between two separate pages.  eCryptfs should
not assume that any of the memory sent through virt_to_scatterlist() is
all contained in a single page, and so this patch allocates two
scatterlist structs instead of one when processing keys.  I have received
confirmation from one person affected by this bug that this patch resolves
the issue for him, and so I am submitting it for inclusion in a future
stable release.

Note that virt_to_scatterlist() runs sg_init_table() on the scatterlist
structs passed to it, so the calls to sg_init_table() in
decrypt_passphrase_encrypted_session_key() are redundant.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Reported-by: Paulo J. S. Silva <pjssilva@ime.usp.br>
Cc: "Leon Woestenberg" <leon.woestenberg@gmail.com>
Cc: Tim Gardner <tim.gardner@canonical.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spi_imx: full duplex dma corruption bugfix

Fix unsafe order in dma mapping operation: always flush data from the
cache *BEFORE* invalidating it, to allow full duplex transfers where the
same buffer may be used for both writes and reads.

Signed-off-by: Andrea Paterniani <a.paterniani@swapp-eng.it>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lcd: fix oops if driver only interested in .set_power

The LCD driver core calls LCD drivers when either the blanking state or
the display mode has changed, but does not make any check to see if the
called driver has a .set_mode method.

This means if a driver only has a .set_power method then the system will
OOPS on changing mode (and with the console semaphore held so you cannot
easily see the problem).

Fix the problem by ensuring that either callback is valid before use.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

viafb: fix releasing of /proc/viafb/ subtree

When unloading viafb module it does not remove it's /proc/viafb/ subtree
which causes multiple viafb directories to appear below proc when
mobprobing viafb and also lets kernel WARN() on duplicate proc entries:

[  145.458387] WARNING: at /usr/src/linux-2.6.28-rc3-git6/fs/proc/generic.c:551 proc_register+0xe6/0x160()
[  145.458945] proc_dir_entry '/proc/viafb' already registered
[  145.459278] Modules linked in: viafb(+) i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect snd_hda_intel snd_pcm snd_timer snd soundcore snd_page_alloc sg via_agp agpgart [last unloaded: drm]
[  145.460647] Pid: 1904, comm: modprobe Tainted: G        W  2.6.28-rc3-git6 #4
[  145.461064] Call Trace:
[  145.461248]  [<c01066f1>] ? dump_stack+0x1/0x80
[  145.461533]  [<c01228a3>] warn_slowpath+0x63/0x80
[  145.461851]  [<c0253ec9>] ? idr_get_empty_slot+0xe9/0x250
[  145.462186]  [<c0254120>] ? ida_get_new_above+0xf0/0x150
[  145.462528]  [<c019fb86>] proc_register+0xe6/0x160
[  145.462827]  [<c019fdc6>] proc_mkdir_mode+0x36/0x50
[  145.463135]  [<c019fdef>] proc_mkdir+0xf/0x20
[  145.463457]  [<f807173c>] viafb_init+0x73c/0xc86 [viafb]
[  145.463823]  [<f8071000>] ? viafb_init+0x0/0xc86 [viafb]
[  145.464147]  [<c010111d>] do_one_initcall+0x2d/0x160
[  145.464460]  [<c01a6543>] ? sysfs_add_file+0x13/0x20
[  145.464786]  [<c015f031>] ? vfree+0x21/0x30
[  145.465049]  [<c01433b5>] ? load_module+0x1215/0x1500
[  145.465381]  [<c014e455>] ? __alloc_pages_internal+0x95/0x400
[  145.465755]  [<c0143723>] sys_init_module+0x83/0x1a0
[  145.466065]  [<c016ceed>] ? sys_read+0x3d/0x70
[  145.466354]  [<c0103bc1>] sysenter_do_call+0x12/0x25
[  145.466653] ---[ end trace c84b37826e16748c ]---

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: <JosephChan@via.com.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pxa2xx_spi: bugfix full duplex dma data corruption

Fixes a data corruption bug in pxa2xx_spi.c when operating in full duplex
mode with DMA and using buffers that overlap.

SPI transmit and receive buffers are allowed to be the same or to overlap.
 However, this driver fails if such overlap is attempted in DMA mode
because it maps the rx and tx buffers in the wrong order.  By mapping
DMA_FROM_DEVICE (read) before DMA_TO_DEVICE (write), it invalidates the
cache before flushing it, thus discarding data which should have been
transmitted.

The patch corrects the order of mapping.  This bug exists in all versions
of pxa2xx_spi.c; similar bugs are in the drivers for two other SPI
controllers (au1500, imx).

A version of this patch has been tested on kernel 2.6.20 using
verification of loopback data with: random transfer length, random
bits-per-word, random positive offsets (both larger and smaller than
transfer length) between the start of the rx and tx buffers, and varying
clock rates.

Signed-off-by: Ned Forrester <nforrester@whoi.edu>
Cc: Vernon Sauder <vernoninhand@gmail.com>
Cc: J. Scott Merritt <merrij3@rpi.edu>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: <stable@kernel.org> [2.6.27.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>