linux-2.6
18 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Tue, 7 Feb 2006 18:10:09 +0000 (10:10 -0800)] 
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

18 years ago[PATCH] Fix bad apic fix on i386
Andi Kleen [Tue, 7 Feb 2006 11:48:00 +0000 (12:48 +0100)] 
[PATCH] Fix bad apic fix on i386

Fix wrong '!' in bad apic fix

I forgot to remove the ! when moving the code from x86-64 to i386 x86-64
tested !disable_apic, but of course for cpu_has_apic it shouldn't be
negated.

Credit goes to Jan Beulich for spotting it with eagle eyes.

Cc: Jan Beulich <jbeulich@novell.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoMerge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Tue, 7 Feb 2006 18:04:04 +0000 (10:04 -0800)] 
Merge branch 'upstream-fixes' of /linux/kernel/git/jgarzik/netdev-2.6

18 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-bugfix
Linus Torvalds [Tue, 7 Feb 2006 18:01:43 +0000 (10:01 -0800)] 
Merge git://git./linux/kernel/git/sam/kbuild-bugfix

18 years ago[MIPS] Clear ST0_RE on bootup.
Ralf Baechle [Tue, 7 Feb 2006 01:20:43 +0000 (01:20 +0000)] 
[MIPS] Clear ST0_RE on bootup.

The reset state is undefined and some firmware doesn't clear this bit
possibly resulting in crashes on entry into userland.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] TX49x7: Fix reporting of the CPU name and PCI clock
Sergei Shtylylov [Sat, 4 Feb 2006 12:11:14 +0000 (15:11 +0300)] 
[MIPS] TX49x7: Fix reporting of the CPU name and PCI clock

I've noticed that PCI clock was incorrectly reported as 66 MHz while being
mere 33 MHz on RBTX4937 board -- this was due to the different encoding of
the PCI divisor field in CCFG register between TX4927 and TX4937 chips...

Also, RBTX49x7 was printed out as a CPU name (e.g., "CPU is RBTX4937");
and some debug printk() were duplicating each other...

Signed-off-by: Konstantin Baydarov <kbaidarov@ru.mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] TX49 MFC0 bug workaround
Atsushi Nemoto [Thu, 2 Feb 2006 16:34:01 +0000 (01:34 +0900)] 
[MIPS] TX49 MFC0 bug workaround

If mfc0 $12 follows store and the mfc0 is last instruction of a
page and fetching the next instruction causes TLB miss, the result
of the mfc0 might wrongly contain EXL bit.

ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008

Workaround: mask EXL bit of the result or place a nop before mfc0.  It
doesn't harm to always clear those bits, so we change the code to do so.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Fix linker script to work for non-4K page size.
Ralf Baechle [Thu, 2 Feb 2006 14:31:16 +0000 (14:31 +0000)] 
[MIPS] Fix linker script to work for non-4K page size.

Very much to my surprise Fuxin Zhang reports this is all it takes to get
the kernel to work for page sizes larger than 4kB.  This also paves the
way for support for the R6000 and R8000 which don't support 4kB page size.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Oprofile: Support for 34K UP kernels.
Ralf Baechle [Wed, 1 Feb 2006 17:54:30 +0000 (17:54 +0000)] 
[MIPS] Oprofile: Support for 34K UP kernels.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Fix dump_tlb.c warning and cleanup.
Atsushi Nemoto [Wed, 1 Feb 2006 16:29:14 +0000 (01:29 +0900)] 
[MIPS] Fix dump_tlb.c warning and cleanup.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Fix minor sparse warnings
Atsushi Nemoto [Wed, 1 Feb 2006 16:26:34 +0000 (01:26 +0900)] 
[MIPS] Fix minor sparse warnings

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] MIPS R2 optimized endianess swapping.
Ralf Baechle [Wed, 1 Feb 2006 15:29:21 +0000 (15:29 +0000)] 
[MIPS] MIPS R2 optimized endianess swapping.

From Franck Bui-Huu <vagabon.xyz@gmail.com> with modifications by me.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Remove buggy inline version of memscan.
Ralf Baechle [Tue, 31 Jan 2006 17:07:53 +0000 (17:07 +0000)] 
[MIPS] Remove buggy inline version of memscan.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Sparse: Add some __user tags to signal functions.
Atsushi Nemoto [Tue, 31 Jan 2006 16:41:09 +0000 (01:41 +0900)] 
[MIPS] Sparse: Add some __user tags to signal functions.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Shrink Qemu configuration to the bare minimum that is need and tested.
Ralf Baechle [Tue, 31 Jan 2006 01:40:55 +0000 (01:40 +0000)] 
[MIPS] Shrink Qemu configuration to the bare minimum that is need and tested.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Support /proc/kcore for MIPS
Daniel Jacobowitz [Fri, 21 Jan 2005 00:59:54 +0000 (19:59 -0500)] 
[MIPS] Support /proc/kcore for MIPS

I'm pretty sure that the CKSEG0 bits are wrong, but I did need to
cover that region - because the SB-1 kernel links at 0xffffffff80100000
or so, disassembly and printing static variables don't work unless the
debugger can read that region.

Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] IP22: Fix serial console detection
Ralf Baechle [Mon, 30 Jan 2006 17:48:27 +0000 (17:48 +0000)] 
[MIPS] IP22: Fix serial console detection

From: Kaj-Michael Lang <milang@tal.org>

In ip22-setup.c the checks for serial/graphics console logic does
not check if ARCS console=g but the machine is using serial console, as
it does if no keyboard is attached.

This patch adds a check if ConsoleOut is serial. There might also be
support for other graphics than Newport soon...

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] ieee754[sd]p_neg workaround
Atsushi Nemoto [Mon, 2 Jan 2006 12:59:49 +0000 (21:59 +0900)] 
[MIPS] ieee754[sd]p_neg workaround

It looks glibc's pow() assumes an unary '-' operation for any number
(including NaNs) always inverts its sign bit (though IEEE754 does not
specify the sign bit for NaNs).  This patch make the kernel math-emu
emulates real MIPS neg.[ds] instruction.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Remove wrong __user tags.
Atsushi Nemoto [Sat, 28 Jan 2006 17:27:51 +0000 (02:27 +0900)] 
[MIPS] Remove wrong __user tags.

This fixes sparse warnings 'dereference of noderef expression'.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Cleanup fls implementation.
Ralf Baechle [Mon, 30 Jan 2006 17:14:41 +0000 (17:14 +0000)] 
[MIPS] Cleanup fls implementation.

fls was the only called of flz, so fold flz into fls, same for the
__ilog2 call.  Delete the now unused flz function.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] local_irq_restore wasn't safe to be used in other macros mode.
Ralf Baechle [Mon, 30 Jan 2006 16:48:26 +0000 (16:48 +0000)] 
[MIPS] local_irq_restore wasn't safe to be used in other macros mode.

It always left the assembler in reorder mode possibly causing disaster.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Remove commented out code to add -mmad for Nevada.
Ralf Baechle [Mon, 30 Jan 2006 04:07:39 +0000 (04:07 +0000)] 
[MIPS] Remove commented out code to add -mmad for Nevada.

Adding -mmad is not usable since over half a decade in gcc and when
fixed the proper -march option values should enable the use of the
mad, madu and mul instructions of the R5500, RM5200, RM7000 and RM9000
families.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Fix Cobalt PCI cache line sizes
Peter Horton [Sun, 29 Jan 2006 21:33:48 +0000 (21:33 +0000)] 
[MIPS] Fix Cobalt PCI cache line sizes

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Sparse: Add _MIPS_SZINT and _MIPS_ISA to CHECKFLAGS to fix sparse warnings.
Atsushi Nemoto [Sat, 28 Jan 2006 17:31:17 +0000 (02:31 +0900)] 
[MIPS] Sparse: Add _MIPS_SZINT and _MIPS_ISA to CHECKFLAGS to fix sparse warnings.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Build blast_cache routines from template
Atsushi Nemoto [Sat, 28 Jan 2006 17:30:55 +0000 (02:30 +0900)] 
[MIPS] Build blast_cache routines from template

Build blast_xxx, blast_xxx_page, blast_xxx_page_indexed from template.
Easier to maintaina and saves 300 lines.  Generated code should be
unchanged.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Sparse: Fix some compiler/sparse warnings in ptrace32.c
Atsushi Nemoto [Sun, 29 Jan 2006 13:34:32 +0000 (22:34 +0900)] 
[MIPS] Sparse: Fix some compiler/sparse warnings in ptrace32.c

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Reformat to 80 columns.
Ralf Baechle [Sun, 29 Jan 2006 21:01:42 +0000 (21:01 +0000)] 
[MIPS] Reformat to 80 columns.

Patch courtesy of Emily Postnews ;-)

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Sibyte: Make all setup functions __init.
Ralf Baechle [Sun, 29 Jan 2006 20:56:43 +0000 (20:56 +0000)] 
[MIPS] Sibyte: Make all setup functions __init.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Get rid of CONFIG_SB1_PASS_1_WORKAROUNDS #ifdef crapola.
Ralf Baechle [Sun, 29 Jan 2006 18:42:08 +0000 (18:42 +0000)] 
[MIPS] Get rid of CONFIG_SB1_PASS_1_WORKAROUNDS #ifdef crapola.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Au1200: Make KGDB compile
Sergei Shtylylov [Thu, 26 Jan 2006 01:36:25 +0000 (04:36 +0300)] 
[MIPS] Au1200: Make KGDB compile

AMD Au1200 SOC just doesn't have UART3, so KGDB won't even compile for it
as is, here's the fix to make KGDB use UART1.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Au1xx0: really set KSEG0 to uncached on reboot
Sergei Shtylylov [Wed, 25 Jan 2006 18:27:10 +0000 (21:27 +0300)] 
[MIPS] Au1xx0: really set KSEG0 to uncached on reboot

Fix a really old buglet in AMD Au1xx0 restart code: instead of
modifying the whole CP0 Config.K0 field to 010b (meaning KSEG0 uncached)
before flushing the caches and resetting a board, it only sets bit 1 of that
reg. which is effectively a NOP since Config.K0 == 011b as the kernel sets it
up (which is also its default value for Au1xx0).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] TX49x7: Fix timer register #define's
Sergei Shtylylov [Wed, 25 Jan 2006 18:24:57 +0000 (21:24 +0300)] 
[MIPS] TX49x7: Fix timer register #define's

Fix the #define's for TX4927/37 timer reg's to match the datasheets (those

Signed-off-by: Konstantin Baydarov <kbaidarov@mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Bullet proof uaccess.h against 4.0.1 miss-compilation.
Ralf Baechle [Mon, 23 Jan 2006 16:15:30 +0000 (16:15 +0000)] 
[MIPS] Bullet proof uaccess.h against 4.0.1 miss-compilation.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] SB1: Add oprofile support.
Mark Mason [Tue, 17 Jan 2006 20:06:32 +0000 (12:06 -0800)] 
[MIPS] SB1: Add oprofile support.

Signed-off-by: Mark Mason <mason@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] BCM1480: Cleanup debug code left behind in the PCI driver.
Mark Mason [Tue, 17 Jan 2006 20:02:17 +0000 (12:02 -0800)] 
[MIPS] BCM1480: Cleanup debug code left behind in the PCI driver.

Signed-off-by: Mark Mason <mason@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] BCM1125 PCI fixes
Mark Mason [Tue, 17 Jan 2006 19:55:52 +0000 (11:55 -0800)] 
[MIPS] BCM1125 PCI fixes

Make BCM1125 targets to link again.

Signed-off-by: Mark Mason <mason@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Nevada support for SGI O2.
Ralf Baechle [Thu, 19 Jan 2006 14:55:42 +0000 (14:55 +0000)] 
[MIPS] Nevada support for SGI O2.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] CPU definitions for Cobalt.
Ralf Baechle [Thu, 19 Jan 2006 00:49:32 +0000 (00:49 +0000)] 
[MIPS] CPU definitions for Cobalt.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Rename include/asm-mips/cobalt to include/asm-mips/mach-cobalt.
Ralf Baechle [Wed, 18 Jan 2006 23:26:43 +0000 (23:26 +0000)] 
[MIPS] Rename include/asm-mips/cobalt to include/asm-mips/mach-cobalt.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Rename _machine_power_off to pm_power_off so the kernel builds again.
Ralf Baechle [Wed, 18 Jan 2006 17:37:07 +0000 (17:37 +0000)] 
[MIPS] Rename _machine_power_off to pm_power_off so the kernel builds again.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Check function pointers are non-zero before calling.
Ralf Baechle [Tue, 17 Jan 2006 21:14:01 +0000 (21:14 +0000)] 
[MIPS] Check function pointers are non-zero before calling.

Several boards don't initialize the pointers, so let's play safe.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Revert "mips: add pm_power_off"
Ralf Baechle [Fri, 3 Feb 2006 16:47:44 +0000 (16:47 +0000)] 
[MIPS] Revert "mips: add pm_power_off"

pm_power_off duplicates the functionality of _machine_restart.

This reverts b142159fa5ffbad73b6927fafa5440148030f3f1 commit.

18 years ago[MIPS] RTLX compile fixes.
Ralf Baechle [Sun, 15 Jan 2006 18:11:28 +0000 (18:11 +0000)] 
[MIPS] RTLX compile fixes.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Get rid of unnecessary prototypes. Fixes and optimizations for HZ > 100.
Ralf Baechle [Sun, 15 Jan 2006 18:10:39 +0000 (18:10 +0000)] 
[MIPS] Get rid of unnecessary prototypes.  Fixes and optimizations for HZ > 100.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Fix C version of ssnop to use the right opcode.
Ralf Baechle [Wed, 11 Jan 2006 18:23:00 +0000 (18:23 +0000)] 
[MIPS] Fix C version of ssnop to use the right opcode.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Remove stray .set mips3 resulting in 64-bit instruction in 32-bit kernels.
Ralf Baechle [Mon, 9 Jan 2006 20:09:36 +0000 (20:09 +0000)] 
[MIPS] Remove stray .set mips3 resulting in 64-bit instruction in 32-bit kernels.

Only the NMI handler was affected so this is a low impact bug.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[PATCH] Kbuild menu - hide empty NETDEVICES menu when NET is disabled
Paolo 'Blaisorblade' Giarrusso [Fri, 3 Feb 2006 09:45:21 +0000 (01:45 -0800)] 
[PATCH] Kbuild menu - hide empty NETDEVICES menu when NET is disabled

Make the whole netdevices menu depend on NET, rather than having an empty
submenu when networking is disabled.

Indeed, almost the whole body of the menu was surrounded by if NETDEVICES,
and what was outside depended on NETCONSOLE which is inside the menu.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
18 years ago[PATCH] uli526x warning fix
Andrew Morton [Fri, 3 Feb 2006 09:45:20 +0000 (01:45 -0800)] 
[PATCH] uli526x warning fix

drivers/net/tulip/uli526x.c: In function `__check_mode':
drivers/net/tulip/uli526x.c:1693: warning: return from incompatible pointer type

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
18 years agoMerge branch 'for-jeff' of git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6
Jeff Garzik [Tue, 7 Feb 2006 07:05:17 +0000 (02:05 -0500)] 
Merge branch 'for-jeff' of git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6

18 years ago[PATCH] gianfar: Fix sparse warnings
Kumar Gala [Wed, 1 Feb 2006 21:18:03 +0000 (15:18 -0600)] 
[PATCH] gianfar: Fix sparse warnings

Fixed sparse warnings mainly due to lack of __iomem.

Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
18 years ago[PATCH] dscc4: fix dscc4_init_dummy_skb check
Alexey Dobriyan [Wed, 1 Feb 2006 08:54:41 +0000 (00:54 -0800)] 
[PATCH] dscc4: fix dscc4_init_dummy_skb check

It returns a pointer.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
18 years ago[PATCH] bonding: Sparse warnings fix
Luiz Fernando Capitulino [Wed, 1 Feb 2006 08:54:34 +0000 (00:54 -0800)] 
[PATCH] bonding: Sparse warnings fix

drivers/net/bonding/bond_sysfs.c:263:27: warning: Using plain integer as NULL pointer
drivers/net/bonding/bond_sysfs.c:998:26: warning: Using plain integer as NULL pointer
drivers/net/bonding/bond_sysfs.c:1126:26: warning: Using plain integer as NULL pointer

Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
18 years ago[PATCH] bonding: allow bond to use TSO if slaves support it
Jay Vosburgh [Mon, 30 Jan 2006 23:40:59 +0000 (15:40 -0800)] 
[PATCH] bonding: allow bond to use TSO if slaves support it

Add NETIF_F_TSO (NETIF_F_UFO) to BOND_INTERSECT_FEATURES so that it can
be used by a bonding device iff all its slave devices support TSO (UFO).

Signed-off-by: Arthur Kepner <akepner@sgi.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
18 years ago[PATCH] sky2: version 0.15 update
Stephen Hemminger [Mon, 30 Jan 2006 19:38:01 +0000 (11:38 -0800)] 
[PATCH] sky2: version 0.15 update

Increase version, and get rid of out-dated comment.
Speed setting has worked for quite a while.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
18 years ago[PATCH] sky2: support msi interrupt (revised)
Stephen Hemminger [Mon, 30 Jan 2006 19:38:00 +0000 (11:38 -0800)] 
[PATCH] sky2: support msi interrupt (revised)

This hardware supports Message Signaled interrupts.
When setting up, use software interrupt to check for bad hardware.

Signed-off-by: Stephen Hemminger <shemminger @osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
18 years ago[PATCH] sky2: add irq to entropy pool
Stephen Hemminger [Mon, 30 Jan 2006 19:37:59 +0000 (11:37 -0800)] 
[PATCH] sky2: add irq to entropy pool

The sky2 interrupt can be used to add entropy.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
18 years ago[PATCH] sky2: clear irq race
Stephen Hemminger [Mon, 30 Jan 2006 19:37:58 +0000 (11:37 -0800)] 
[PATCH] sky2: clear irq race

Move the interrupt clear to before processing, this avoids a
possible races with status delaying.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
18 years ago[PATCH] sky2: set mac address fix
Stephen Hemminger [Mon, 30 Jan 2006 19:37:57 +0000 (11:37 -0800)] 
[PATCH] sky2: set mac address fix

Using the sky2 driver with bonding can result in oopses related to
reinitializing the PHY when the MAC address is changed (which bonding
is wont to do).  This patch changes sky2_set_mac_address to take less
drastic measures.

This is analagous to the skge patch here:

http://lkml.org/lkml/2005/9/29/399

which fixed the issue here:

http://bugzilla.kernel.org/show_bug.cgi?id=5271

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
18 years ago[PATCH] sky2: ethtool rx_coalesce settings fix
Stephen Hemminger [Mon, 30 Jan 2006 19:37:56 +0000 (11:37 -0800)] 
[PATCH] sky2: ethtool rx_coalesce settings fix

This fixes setting rx_coalesce_usecs_irq via ethtool in sky2.
The write was directed to the wrong register.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
18 years ago[PATCH] sky2: pci config space checking
Stephen Hemminger [Mon, 30 Jan 2006 19:37:55 +0000 (11:37 -0800)] 
[PATCH] sky2: pci config space checking

There were bugs in mmconfig access to PCI space, up to and
include 2.6.16-rc1. These prevented the sky2 driver from being
able to clear PCI express errors.

This patch makes the driver check (during probe), for errors
in PCI config access and fail.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
18 years ago[PATCH] sky2: power management fix
Stephen Hemminger [Mon, 30 Jan 2006 19:37:54 +0000 (11:37 -0800)] 
[PATCH] sky2: power management fix

Fix suspend/resume for sky2. The status ring was getting reallocated
and a bunch of other mistakes. Also, check return from power_state
on resume.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
18 years ago[PATCH] sis900: remove cfgpmcsr I/O space register define
Lennert Buytenhek [Sun, 29 Jan 2006 19:33:52 +0000 (20:33 +0100)] 
[PATCH] sis900: remove cfgpmcsr I/O space register define

sis900 defines 'cfgpmcsr' as an I/O space register, but CFGPMCSR is
in fact a config space register, and there is no register at offset
0x44 in I/O space, so delete the enum.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
18 years agoe100: remove init_hw call to fix panic
Jesse Brandeburg [Tue, 7 Feb 2006 06:50:45 +0000 (01:50 -0500)] 
e100: remove init_hw call to fix panic

e100 seems to have had a long standing bug where e100_init_hw was being
called when it should not have been.  This caused a panic due to recent
changes that rely on correct set up in the driver, and more robust error
paths.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
18 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Mon, 6 Feb 2006 23:46:39 +0000 (15:46 -0800)] 
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

18 years ago[IA64-SGI] Shub2 BTE address fix
Russ Anderson [Fri, 3 Feb 2006 20:47:15 +0000 (14:47 -0600)] 
[IA64-SGI] Shub2 BTE address fix

After converting the cpu physical address to shub2 physical
addressing, the address was run through TO_PHYS() which
clobbered a high node offset bit causing the BTE to fail
on shub2 nodes with large memory.  This fix corrects
that problem.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
18 years agoPull sn-recursive-flags-for-select-builds into release branch
Tony Luck [Mon, 6 Feb 2006 17:23:51 +0000 (09:23 -0800)] 
Pull sn-recursive-flags-for-select-builds into release branch

18 years ago[PPP]: Fixed hardware RX checksum handling
Herbert Xu [Mon, 6 Feb 2006 04:23:33 +0000 (20:23 -0800)] 
[PPP]: Fixed hardware RX checksum handling

When we pull the PPP protocol off the skb, we forgot to update the
hardware RX checksum.  This may lead to messages such as

dsl0: hw csum failure.

Similarly, we need to clear the hardware checksum flag when we use
the existing packet to store the decompressed result.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[PATCH] USB: Fix GPL markings on usb core functions.
Greg KH [Sun, 5 Feb 2006 22:16:08 +0000 (14:16 -0800)] 
[PATCH] USB: Fix GPL markings on usb core functions.

I thought we had fixed up all non-gpl USB drivers, and was wrong to do
this.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agomm/slab.c (non-NUMA): Fix compile warning and clean up code
Linus Torvalds [Sun, 5 Feb 2006 19:26:38 +0000 (11:26 -0800)] 
mm/slab.c (non-NUMA): Fix compile warning and clean up code

The non-NUMA case would do an unmatched "free_alien_cache()" on an alien
pointer that had never been allocated.

It might not matter from a code generation standpoint (since in the
non-NUMA case, the code doesn't actually _do_ anything), but it not only
results in a compiler warning, it's really really ugly too.

Fix the compiler warning by just having a matching dummy allocation.
That also avoids an unnecessary #ifdef in the code.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Sun, 5 Feb 2006 19:10:54 +0000 (11:10 -0800)] 
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sun, 5 Feb 2006 19:10:29 +0000 (11:10 -0800)] 
Merge /pub/scm/linux/kernel/git/davem/net-2.6

18 years ago[PATCH] kconfig: detect if -lintl is needed when linking conf,mconf
Robb, Sam [Sun, 5 Feb 2006 07:28:06 +0000 (23:28 -0800)] 
[PATCH] kconfig: detect if -lintl is needed when linking conf,mconf

On a system where libintl.h is present, but the NLS functionality is
supplied by a separate library instead of the system C library, an attempt
to "make config" or "make menuconfig" will fail with link errors, ex:

  scripts/kconfig/mconf.o:mconf.c:(.text+0xf63): undefined reference to
    `_libintl_gettext'

This patch attempts to correct the problem by detecting whether or not NLS
support requires linking with libintl.

Signed-off-by: Samuel J Robb <sam.robb@timesys.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] i386: HIGHMEM64G must depend on X86_CMPXCHG64
Adrian Bunk [Sun, 5 Feb 2006 07:28:05 +0000 (23:28 -0800)] 
[PATCH] i386: HIGHMEM64G must depend on X86_CMPXCHG64

Due to the usage of set_64bit in include/asm-i386/pgtable-3level.h,
HIGHMEM64G must depend on X86_CMPXCHG64.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Fix "value computed is not used" compile warnings with gcc-4.1
Takashi Iwai [Sun, 5 Feb 2006 07:28:05 +0000 (23:28 -0800)] 
[PATCH] Fix "value computed is not used" compile warnings with gcc-4.1

Fix gcc4.1 compile warnings "value computed is not used" with
set_current_state() and set_task_state() on i386/SMP and x86-64.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] i386: print kernel version in register dumps
Chuck Ebbert [Sun, 5 Feb 2006 07:28:04 +0000 (23:28 -0800)] 
[PATCH] i386: print kernel version in register dumps

Show first field of kernel version in register dumps like x86_64 does.

Changes output from e.g.:
(2.6.16-rc1)
to:
(2.6.16-rc1 #12)

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] i386 cpu hotplug: don't access freed memory
Chuck Ebbert [Sun, 5 Feb 2006 07:28:03 +0000 (23:28 -0800)] 
[PATCH] i386 cpu hotplug: don't access freed memory

i386 CPU init code accesses freed init memory when booting a newly-started
processor after CPU hotplug.  The cpu_devs array is searched to find the
vendor and it contains pointers to freed data.

Fix that by:

        1. Zeroing entries for freed vendor data after bootup.
        2. Changing Transmeta, NSC and UMC to all __init[data].
        3. Printing a warning (once only) and setting this_cpu
           to a safe default when the vendor is not found.

This does not change behavior for AMD systems.  They were broken already
but no error was reported.

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] namei.c: unlock missing in error case
Ulrich Drepper [Sun, 5 Feb 2006 07:28:02 +0000 (23:28 -0800)] 
[PATCH] namei.c: unlock missing in error case

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] VFS: Ensure LOOKUP_CONTINUE flag is preserved by link_path_walk()
Trond Myklebust [Sun, 5 Feb 2006 07:28:01 +0000 (23:28 -0800)] 
[PATCH] VFS: Ensure LOOKUP_CONTINUE flag is preserved by link_path_walk()

When walking a path, the LOOKUP_CONTINUE flag is used by some filesystems
(for instance NFS) in order to determine whether or not it is looking up
the last component of the path.  It this is the case, it may have to look
at the intent information in order to perform various tasks such as atomic
open.

A problem currently occurs when link_path_walk() hits a symlink.  In this
case LOOKUP_CONTINUE may be cleared prematurely when we hit the end of the
path passed by __vfs_follow_link() (i.e.  the end of the symlink path)
rather than when we hit the end of the path passed by the user.

The solution is to have link_path_walk() clear LOOKUP_CONTINUE if and only
if that flag was unset when we entered the function.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] NUMA slab locking fixes: fix cpu down and up locking
Ravikiran G Thirumalai [Sun, 5 Feb 2006 07:27:59 +0000 (23:27 -0800)] 
[PATCH] NUMA slab locking fixes: fix cpu down and up locking

This fixes locking and bugs in cpu_down and cpu_up paths of the NUMA slab
allocator.  Sonny Rao <sonny@burdell.org> reported problems sometime back on
POWER5 boxes, when the last cpu on the nodes were being offlined.  We could
not reproduce the same on x86_64 because the cpumask (node_to_cpumask) was not
being updated on cpu down.  Since that issue is now fixed, we can reproduce
Sonny's problems on x86_64 NUMA, and here is the fix.

The problem earlier was on CPU_DOWN, if it was the last cpu on the node to go
down, the array_caches (shared, alien) and the kmem_list3 of the node were
being freed (kfree) with the kmem_list3 lock held.  If the l3 or the
array_caches were to come from the same cache being cleared, we hit on
badness.

This patch cleans up the locking in cpu_up and cpu_down path.  We cannot
really free l3 on cpu down because, there is no node offlining yet and even
though a cpu is not yet up, node local memory can be allocated for it.  So l3s
are usually allocated at keme_cache_create and destroyed at
kmem_cache_destroy.  Hence, we don't need cachep->spinlock protection to get
to the cachep->nodelist[nodeid] either.

Patch survived onlining and offlining on a 4 core 2 node Tyan box with a 4
dbench process running all the time.

Signed-off-by: Alok N Kataria <alokk@calsoftinc.com>
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Cc: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] NUMA slab locking fixes: irq disabling from cahep->spinlock to l3 lock
Ravikiran G Thirumalai [Sun, 5 Feb 2006 07:27:58 +0000 (23:27 -0800)] 
[PATCH] NUMA slab locking fixes: irq disabling from cahep->spinlock to l3 lock

Earlier, we had to disable on chip interrupts while taking the
cachep->spinlock because, at cache_grow, on every addition of a slab to a slab
cache, we incremented colour_next which was protected by the cachep->spinlock,
and cache_grow could occur at interrupt context.  Since, now we protect the
per-node colour_next with the node's list_lock, we do not need to disable on
chip interrupts while taking the per-cache spinlock, but we just need to
disable interrupts when taking the per-node kmem_list3 list_lock.

Signed-off-by: Alok N Kataria <alokk@calsoftinc.com>
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Cc: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] NUMA slab locking fixes: move color_next to l3
Ravikiran G Thirumalai [Sun, 5 Feb 2006 07:27:56 +0000 (23:27 -0800)] 
[PATCH] NUMA slab locking fixes: move color_next to l3

colour_next is used as an index to add a colouring offset to a new slab in the
cache (colour_off * colour_next).  Now with the NUMA aware slab allocator, it
makes sense to colour slabs added on the same node sequentially with
colour_next.

This patch moves the colouring index "colour_next" per-node by placing it on
kmem_list3 rather than kmem_cache.

This also helps simplify locking for CPU up and down paths.

Signed-off-by: Alok N Kataria <alokk@calsoftinc.com>
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Cc: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] hugetlb: add comment explaining reasons for Bus Errors
Christoph Lameter [Sun, 5 Feb 2006 07:27:55 +0000 (23:27 -0800)] 
[PATCH] hugetlb: add comment explaining reasons for Bus Errors

I just spent some time researching a Bus Error.  Turns out that the huge
page fault handler can return VM_FAULT_SIGBUS for various conditions where
no huge page is available.

Add a note explaining the reasoning in the source.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] jbd: fix transaction batching
Andrew Morton [Sun, 5 Feb 2006 07:27:54 +0000 (23:27 -0800)] 
[PATCH] jbd: fix transaction batching

Ben points out that:

  When writing files out using O_SYNC, jbd's 1 jiffy delay results in a
  significant drop in throughput as the disk sits idle.  The patch below
  results in a 4-5x performance improvement (from 6.5MB/s to ~24-30MB/s on my
  IDE test box) when writing out files using O_SYNC.

So optimise the batching code by omitting it entirely if the process which is
doing a sync write is the same as the one which did the most recent sync
write.  If that's true, we're unlikely to get any other processes joining the
transaction.

(Has been in -mm for ages - it took me a long time to get on to performance
testing it)

Numbers, on write-cache-disabled IDE:

/usr/bin/time -p synctest -n 10 -uf -t 1 -p 1 dir-name

Unpatched:
40 seconds
Patched:
35 seconds
Batching disabled:
35 seconds

This is the problematic single-process-doing-fsync case.  With multiple
fsyncing processes the numbers are AFACIT unaltered by the patch.

Aside: performance testing and instrumentation shows that the transaction
batching almost doesn't help (testing with synctest -n 1 -uf -t 100 -p 10
dir-name on non-writeback-caching IDE).  This is because by the time one
process is running a synchronous commit, a bunch of other processes already
have a transaction handle open, so they're all going to batch into the same
transaction anyway.

The batching seems to offer maybe 5-10% speedup with this workload, but I'm
pretty sure it was more important than that when it was first developed 4-odd
years ago...

Cc: "Stephen C. Tweedie" <sct@redhat.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] reiserfs_get_acl() build fix
Andrew Morton [Sun, 5 Feb 2006 07:27:51 +0000 (23:27 -0800)] 
[PATCH] reiserfs_get_acl() build fix

With CONFIG_REISERFS_FS_XATTR=y, CONFIG_REISERFS_FS_POSIX_ACL=n:

fs/reiserfs/xattr.c: In function `reiserfs_check_acl':
fs/reiserfs/xattr.c:1330: called object is not a function

Cc: Chris Mason <mason@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] x86: fix stack trace facility level
Hugh Dickins [Sun, 5 Feb 2006 07:27:51 +0000 (23:27 -0800)] 
[PATCH] x86: fix stack trace facility level

dump_stack() on page allocation failure presently has an irritating habit
of shouting just "====" at everyone: please stop it.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] selinux: require SECURITY_NETWORK
Stephen Smalley [Sun, 5 Feb 2006 07:27:50 +0000 (23:27 -0800)] 
[PATCH] selinux: require SECURITY_NETWORK

Make SELinux depend on SECURITY_NETWORK (which depends on SECURITY), as it
requires the socket hooks for proper operation even in the local case.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] missing license tag in intermodule
Dave Jones [Sun, 5 Feb 2006 07:27:49 +0000 (23:27 -0800)] 
[PATCH] missing license tag in intermodule

It may suck something awful, but it shouldn't taint the kernel.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] pktcdvd: Allow larger packets
Phillip Susi [Sun, 5 Feb 2006 07:27:48 +0000 (23:27 -0800)] 
[PATCH] pktcdvd: Allow larger packets

The pktcdvd driver uses a compile time macro constant to define the maximum
supported packet length.  I changed this from 32 sectors to 128 sectors
because that allows over 100 MB of additional usable space on a 700 MB cdrw,
and increases throughput.

Note that you need a modified cdrwtool program that can format a CDRW disc
with larger packets to benefit from this change.

Signed-off-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] pktcdvd: Don't waste kernel memory
Peter Osterlund [Sun, 5 Feb 2006 07:27:47 +0000 (23:27 -0800)] 
[PATCH] pktcdvd: Don't waste kernel memory

Allocate memory for read-gathering at open time, when it is known just how
much memory is needed.  This avoids wasting kernel memory when the real packet
size is smaller than the maximum packet size supported by the driver.  This is
always the case when using DVD discs.

Signed-off-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Let CDROM_PKTCDVD_WCACHE depend on EXPERIMENTAL
Adrian Bunk [Sun, 5 Feb 2006 07:27:45 +0000 (23:27 -0800)] 
[PATCH] Let CDROM_PKTCDVD_WCACHE depend on EXPERIMENTAL

Unless the help text is outdated, this seems to be logical.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] pktcdvd: remove version string
Peter Osterlund [Sun, 5 Feb 2006 07:27:45 +0000 (23:27 -0800)] 
[PATCH] pktcdvd: remove version string

The version information is not useful for a driver that is maintained in
Linus' kernel tree.

Signed-off-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] pktcdvd: Fix overflow for discs with large packets
Phillip Susi [Sun, 5 Feb 2006 07:27:44 +0000 (23:27 -0800)] 
[PATCH] pktcdvd: Fix overflow for discs with large packets

The pktcdvd driver was using an 8 bit field to store the packet length
obtained from the disc track info.  This causes it to overflow packet length
values of 128KB or more.  I changed the field to 32 bits to fix this.

The pktcdvd driver defaulted to its maximum allowed packet length when it
detected a 0 in the track info field.  I changed this to fail the operation
and refuse to access the media.  This seems more sane than attempting to
access it with a value that almost certainly will not work.

Signed-off-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] sched: only print migration_cost once per boot
Chuck Ebbert [Sun, 5 Feb 2006 07:27:42 +0000 (23:27 -0800)] 
[PATCH] sched: only print migration_cost once per boot

migration_cost prints after every CPU hotplug event.  Make it print only
once at boot.

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] MAINTAINERS/CREDITS: Update SELinux contact info
Stephen Smalley [Sun, 5 Feb 2006 07:27:42 +0000 (23:27 -0800)] 
[PATCH] MAINTAINERS/CREDITS: Update SELinux contact info

Update my contact info.  Please apply.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] fuse: fix request_end() vs fuse_reset_request() race
Miklos Szeredi [Sun, 5 Feb 2006 07:27:40 +0000 (23:27 -0800)] 
[PATCH] fuse: fix request_end() vs fuse_reset_request() race

The last fix for this function in fact opened up a much more often
triggering race.

It was uncommented tricky code, that was buggy.  Add comment, make it less
tricky and fix bug.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Fix i2o_scsi oops on abort
Markus Lidel [Sun, 5 Feb 2006 07:27:39 +0000 (23:27 -0800)] 
[PATCH] Fix i2o_scsi oops on abort

Fix http://bugzilla.kernel.org/show_bug.cgi?id=5923

When a scsi command failed, an oops would result.

Back-to-back SMART queries would make the Seagate drives unhappy.  The
second SMART query would timeout, and the command would be aborted.

Acked-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Kenny Simpson <theonetruekenny@yahoo.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] block: request_queue->ordcolor must not be flipped on SOFTBARRIER
Tejun Heo [Sun, 5 Feb 2006 07:27:38 +0000 (23:27 -0800)] 
[PATCH] block: request_queue->ordcolor must not be flipped on SOFTBARRIER

q->ordcolor must not be flipped on SOFTBARRIER.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] fix ordering on requeued request drainage
Jens Axboe [Sun, 5 Feb 2006 07:27:38 +0000 (23:27 -0800)] 
[PATCH] fix ordering on requeued request drainage

Previously, if a fs request which was being drained failed and got
requeued, blk_do_ordered() didn't allow it to be reissued, which causes
queue stall.  This patch makes blk_do_ordered() use the sequence of each
request to determine whether a request can be issued or not.  This fixes
the bug and simplifies code.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] percpu data: only iterate over possible CPUs
Eric Dumazet [Sun, 5 Feb 2006 07:27:36 +0000 (23:27 -0800)] 
[PATCH] percpu data: only iterate over possible CPUs

percpu_data blindly allocates bootmem memory to store NR_CPUS instances of
cpudata, instead of allocating memory only for possible cpus.

As a preparation for changing that, we need to convert various 0 -> NR_CPUS
loops to use for_each_cpu().

(The above only applies to users of asm-generic/percpu.h.  powerpc has gone it
alone and is presently only allocating memory for present CPUs, so it's
currently corrupting memory).

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Jens Axboe <axboe@suse.de>
Cc: Anton Blanchard <anton@samba.org>
Acked-by: William Irwin <wli@holomorphy.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoRevert "[PATCH] x86_64: Fix the node cpumask of a cpu going down"
Linus Torvalds [Sun, 5 Feb 2006 18:51:57 +0000 (10:51 -0800)] 
Revert "[PATCH] x86_64: Fix the node cpumask of a cpu going down"

This reverts commit 10f4dc8b27ac42f930ac55adb8c521264dc997f8.

Quoth Andi Kleen:
  "Kiran decided that it makes the problem worse than it was before.
   Fixing it fully requires more work which is too much for 2.6.16.  So
   please revert that commit for now."

Signed-off-by: Linus Torvalds <torvalds@osdl.org>