linux-2.6
17 years agoPCI: rpaphp: remove a call that does nothing but a pointer lookup
Linas Vepstas [Fri, 13 Apr 2007 22:34:15 +0000 (15:34 -0700)] 
PCI: rpaphp: remove a call that does nothing but a pointer lookup

Delete another stovepipe: a call to a routine which does nothing.
Remove un-needed semaphore as well.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: rpaphp: Remove another wrappered function
Linas Vepstas [Fri, 13 Apr 2007 22:34:14 +0000 (15:34 -0700)] 
PCI: rpaphp: Remove another wrappered function

Remove another stove-pipe; this funcion was called from
two different places, with a compile-time const that is
then run-time checked to perform two different things.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: rpaphp: Remve another call that is a wrapper
Linas Vepstas [Fri, 13 Apr 2007 22:34:13 +0000 (15:34 -0700)] 
PCI: rpaphp: Remve another call that is a wrapper

Remove another stovepipe: a call which wraps another call, and
just adds printks.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: rpaphp: remove a function that does nothing but wrap debug printks
Linas Vepstas [Fri, 13 Apr 2007 22:34:12 +0000 (15:34 -0700)] 
PCI: rpaphp: remove a function that does nothing but wrap debug printks

Remove a stove-pipe-- a function that is called from only one place,
does nothing but wraps another function with debug printk's.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: rpaphp: Remove un-needed goto
Linas Vepstas [Fri, 13 Apr 2007 22:34:11 +0000 (15:34 -0700)] 
PCI: rpaphp: Remove un-needed goto

Remove un-needed goto.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: rpaphp: Fix a memleak; slot->location string was never freed
Linas Vepstas [Fri, 13 Apr 2007 22:34:10 +0000 (15:34 -0700)] 
PCI: rpaphp: Fix a memleak; slot->location string was never freed

Fix a memleak; the slot->location string was never freed.
Fix some whitespace and overlong-line probelms while we're here.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: rpaphp: match up alloc and free in same routine
Linas Vepstas [Fri, 13 Apr 2007 22:34:09 +0000 (15:34 -0700)] 
PCI: rpaphp: match up alloc and free in same routine

The routine that called an alloc should be the same routine that
calles the mathcing free, if anything in the middle failed.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: rpaphp: Remove global num_slots variable
Linas Vepstas [Fri, 13 Apr 2007 22:34:08 +0000 (15:34 -0700)] 
PCI: rpaphp: Remove global num_slots variable

Cleanup cruft: remove the global "num_slots" variable;
although scattered across multiple files, it is used only
once, in a debug statement.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: rpaphp: Cleanup flow of control for rpaphp_add_slot
Linas Vepstas [Fri, 13 Apr 2007 22:34:07 +0000 (15:34 -0700)] 
PCI: rpaphp: Cleanup flow of control for rpaphp_add_slot

Cleanup the flow of control for rpaphp_add_slot(), so as to
make it easier to read. The ext patch will fix a bug in this
same code.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: add debug information to resource collision message
Chuck Ebbert [Tue, 10 Apr 2007 14:25:44 +0000 (10:25 -0400)] 
PCI: add debug information to resource collision message

Add more information to PCI resource collision message
to help with debugging.

Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: the overdue removal of pci_module_init()
Adrian Bunk [Fri, 6 Apr 2007 10:19:48 +0000 (12:19 +0200)] 
PCI: the overdue removal of pci_module_init()

Unless we finally completely remove it, people will always add new users.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: remove the broken PCI_MULTITHREAD_PROBE option
Adrian Bunk [Tue, 27 Mar 2007 01:02:51 +0000 (03:02 +0200)] 
PCI: remove the broken PCI_MULTITHREAD_PROBE option

This patch removes the PCI_MULTITHREAD_PROBE option that had already
been marked as broken.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMSI: Give archs the option to free all MSI/Xs at once.
Michael Ellerman [Wed, 18 Apr 2007 09:39:22 +0000 (19:39 +1000)] 
MSI: Give archs the option to free all MSI/Xs at once.

This patch introduces an optional function, arch_teardown_msi_irqs(),
which gives an arch the opportunity to do per-device teardown for
MSI/X. If that's not required, the default version simply calls
arch_teardown_msi_irq() for each msi irq required.

arch_teardown_msi_irqs() is simply passed a pdev, attached to the pdev
is a list of msi_descs, it is up to the arch to free the irq associated
with each of these as appropriate.

For archs that _don't_ implement arch_teardown_msi_irqs(), all msi_descs
with irq == 0 are considered unallocated, and the arch teardown routine
is not called on them.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMSI: Give archs the option to allocate all MSI/Xs at once.
Michael Ellerman [Wed, 18 Apr 2007 09:39:21 +0000 (19:39 +1000)] 
MSI: Give archs the option to allocate all MSI/Xs at once.

This patch introduces an optional function, arch_setup_msi_irqs(),
(note the plural) which gives an arch the opportunity to do per-device
setup for MSI/X and then allocate all the requested MSI/Xs at once.

If that's not required by the arch, the default version simply calls
arch_setup_msi_irq() for each MSI irq required.

arch_setup_msi_irqs() is passed a pdev, attached to the pdev is a list
of msi_descs with irq == 0, it is up to the arch to connect these up to
an irq (via set_irq_msi()) or return an error. For convenience the number
of vectors and the type are passed also.

All msi_descs with irq != 0 are considered allocated, and the arch
teardown routine will be called on them when necessary.

The existing semantics of pci_enable_msix() are that if the requested
number of irqs can not be allocated, the maximum number that _could_ be
allocated is returned. To support that, we define that in case of an
error from arch_setup_msi_irqs(), the number of msi_descs with irq != 0
are considered allocated, and are counted toward the "max that could be
allocated".

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMSI: arch must connect the irq and the msi_desc
Michael Ellerman [Wed, 18 Apr 2007 09:39:21 +0000 (19:39 +1000)] 
MSI: arch must connect the irq and the msi_desc

set_irq_msi() currently connects an irq_desc to an msi_desc. The archs call
it at some point in their setup routine, and then the generic code sets up the
reverse mapping from the msi_desc back to the irq.

set_irq_msi() should do both connections, making it the one and only call
required to connect an irq with it's MSI desc and vice versa.

The arch code MUST call set_irq_msi(), and it must do so only once it's sure
it's not going to fail the irq allocation.

Given that there's no need for the arch to return the irq anymore, the return
value from the arch setup routine just becomes 0 for success and anything else
for failure.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agomsi: introduce ARCH_SUPPORTS_MSI Kconfig option (rev2)
Dan Williams [Wed, 18 Apr 2007 08:46:20 +0000 (18:46 +1000)] 
msi: introduce ARCH_SUPPORTS_MSI Kconfig option (rev2)

Allows architectures to advertise that they support MSI rather than listing
each architecture as a PCI_MSI dependency.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMSI: Remove dev->first_msi_irq
Michael Ellerman [Thu, 5 Apr 2007 07:19:12 +0000 (17:19 +1000)] 
MSI: Remove dev->first_msi_irq

Now that we keep a list of msi descriptors, we don't need first_msi_irq
in the pci dev.

If we somehow have zero MSIs configured list_entry() will give us weird
oopes or nice memory corruption bugs. So be paranoid. Add BUG_ONs and also
a check in pci_msi_check_device() to make sure nvec > 0.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMSI: Use a list instead of the custom link structure
Michael Ellerman [Thu, 5 Apr 2007 07:19:10 +0000 (17:19 +1000)] 
MSI: Use a list instead of the custom link structure

The msi descriptors are linked together with what looks a lot like
a linked list, but isn't a struct list_head list. Make it one.

The only complication is that previously we walked a list of irqs, and
got the descriptor for each with get_irq_msi(). Now we have a list of
descriptors and need to get the irq out of it, so it needs to be in the
actual struct msi_desc. We use 0 to indicate no irq is setup.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: Convert to alloc_pci_dev()
Michael Ellerman [Thu, 5 Apr 2007 07:19:09 +0000 (17:19 +1000)] 
PCI: Convert to alloc_pci_dev()

Convert code that allocs a struct pci_dev to use alloc_pci_dev().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: Create alloc_pci_dev(), the one true way to create a struct pci_dev
Michael Ellerman [Thu, 5 Apr 2007 07:19:08 +0000 (17:19 +1000)] 
PCI: Create alloc_pci_dev(), the one true way to create a struct pci_dev

There are currently several places in the kernel where we kmalloc()
a struct pci_dev and start initialising it. It'd be preferable to
have an allocator so we can ensure the pci_dev is correctly initialised
in one place.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMSI: Add an arch_msi_check_device()
Michael Ellerman [Thu, 5 Apr 2007 07:19:08 +0000 (17:19 +1000)] 
MSI: Add an arch_msi_check_device()

Add an arch_check_device(), which gives archs a chance to check the input
to pci_enable_msi/x. The arch might be interested in the value of nvec so
pass it in. Propagate the error value returned from the arch routine out
to the caller.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMSI: Rename pci_msi_supported() to pci_msi_check_device()
Michael Ellerman [Thu, 5 Apr 2007 07:19:07 +0000 (17:19 +1000)] 
MSI: Rename pci_msi_supported() to pci_msi_check_device()

As pointed out by Eric, the name pci_msi_supported() suggests it should
return a boolean value, however it doesn't. So update the name to be
a bit less confusing and update the doco too.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMSI: Consolidate precondition checks
Michael Ellerman [Thu, 22 Mar 2007 10:51:39 +0000 (21:51 +1100)] 
MSI: Consolidate precondition checks

Consolidate precondition checks into a single if statement.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMSI: Expand pci_msi_supported()
Michael Ellerman [Thu, 22 Mar 2007 10:51:39 +0000 (21:51 +1100)] 
MSI: Expand pci_msi_supported()

pci_enable_msi() and pci_enable_msix() both search for the MSI/MSI-X
capability, we can fold this into pci_msi_supported() by passing the
type in.

Update the code to match the comment for pci_msi_supported(). That is
it returns 0 on success, and anything else indicates an error.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMSI: Remove msi_cache
Michael Ellerman [Thu, 22 Mar 2007 10:51:36 +0000 (21:51 +1100)] 
MSI: Remove msi_cache

We don't need a special cache just for msi descriptors. They're not
particularly large, under 100 bytes for sure, and don't seem to require any
special alignment etc. On most systems there will be relatively few MSIs,
and hence we waste most of a page on the cache. Better to just kzalloc the
space for the few we do need.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMSI: Move EXPORT_SYMBOL()s near their definition
Michael Ellerman [Thu, 22 Mar 2007 10:51:34 +0000 (21:51 +1100)] 
MSI: Move EXPORT_SYMBOL()s near their definition

Move EXPORT_SYMBOL()s near their definition.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMSI: Consolidate BUG_ON()s.
Michael Ellerman [Thu, 22 Mar 2007 10:51:34 +0000 (21:51 +1100)] 
MSI: Consolidate BUG_ON()s.

When freeing MSIs and MSI-Xs, we BUG_ON() if the irq has not been
freed, ie. if it still has an action. We can consolidate all of these
BUG_ON()s into msi_free_irqs() as all the code paths lead there almost
immediately anyway.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMSI: Consolidate MSI-X irq freeing code
Michael Ellerman [Thu, 22 Mar 2007 10:51:33 +0000 (21:51 +1100)] 
MSI: Consolidate MSI-X irq freeing code

For the MSI-X case we do exactly the same logic in pci_disable_msix() and
msi_remove_pci_irq_vectors(), so consolidate them.

msi_remove_pci_irq_vectors() wasn't setting dev->first_msi_irq to 0, but
I think it should have been, so the consolidated version does.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMSI: Simplify BUG() handling in msi_remove_pci_irq_vectors() part 2
Michael Ellerman [Thu, 22 Mar 2007 10:51:31 +0000 (21:51 +1100)] 
MSI: Simplify BUG() handling in msi_remove_pci_irq_vectors() part 2

Although it might be nice to do a printk before BUG'ing, it's really not
necessary, and it complicates the code.

The behaviour has changed slightly, in that before we set a flag if the irq
had an action, and continued freeing the other irqs. But as I see it that's
all irrelevant because we end up BUG'ing anyway.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMSI: Simplify BUG() handling in msi_remove_pci_irq_vectors() part 1
Michael Ellerman [Thu, 22 Mar 2007 10:51:31 +0000 (21:51 +1100)] 
MSI: Simplify BUG() handling in msi_remove_pci_irq_vectors() part 1

Although it might be nice to do a printk before BUG'ing, it's really not
necessary, and it complicates the code.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMSI: Simplify BUG() handling in pci_disable_msix()
Michael Ellerman [Thu, 22 Mar 2007 10:51:27 +0000 (21:51 +1100)] 
MSI: Simplify BUG() handling in pci_disable_msix()

Although it might be nice to do a printk before BUG'ing, it's really not
necessary, and it complicates the code.

The behaviour has changed slightly, in that before we set a flag if the irq
had an action, and continued freeing the other irqs. But as I see it that's
all irrelevant because we end up BUG'ing anyway.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMSI: Simplify BUG() handling in pci_disable_msi()
Michael Ellerman [Thu, 22 Mar 2007 10:51:27 +0000 (21:51 +1100)] 
MSI: Simplify BUG() handling in pci_disable_msi()

Although it might be nice to do a printk before BUG'ing, it's really not
necessary, and it complicates the code.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI Documentation: power/pci.txt fix copy/paste error
Randy Dunlap [Thu, 5 Apr 2007 04:35:39 +0000 (21:35 -0700)] 
PCI Documentation: power/pci.txt fix copy/paste error

Correct function name copy-paste error.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: define pci_request/release_regions() for CONFIG_PCI=n
Sergei Shtylyov [Sun, 1 Apr 2007 17:13:58 +0000 (21:13 +0400)] 
PCI: define pci_request/release_regions() for CONFIG_PCI=n

Balance declarations of pci_request_regions() and pci_release_regions() with
empty inline definitions for the CONFIG_PCI=n case -- otherwise my patch to
drivers/net/3c59x.c in the -mm tree doesn't compile. :-)

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agopci: do not mark exported functions as __devinit
Sam Ravnborg [Tue, 27 Mar 2007 05:53:30 +0000 (21:53 -0800)] 
pci: do not mark exported functions as __devinit

Functions marked __devinit will be removed after kernel init.  But being
exported they are potentially called by a module much later.

So the safer choice seems to be to keep the function even in the non
CONFIG_HOTPLUG case.

This silence the follwoing section mismatch warnings:
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_device from __ksymtab_gpl between '__ksymtab_pci_bus_add_device' (at offset 0x20) and '__ksymtab_pci_walk_bus'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_create_bus from __ksymtab_gpl between '__ksymtab_pci_create_bus' (at offset 0x40) and '__ksymtab_pci_stop_bus_device'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_max_busnr from __ksymtab_gpl between '__ksymtab_pci_bus_max_busnr' (at offset 0xc0) and '__ksymtab_pci_assign_resource_fixed'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_claim_resource from __ksymtab_gpl between '__ksymtab_pci_claim_resource' (at offset 0xe0) and '__ksymtab_pcie_port_bus_type'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_devices from __ksymtab between '__ksymtab_pci_bus_add_devices' (at offset 0x70) and '__ksymtab_pci_bus_alloc_resource'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_scan_bus_parented from __ksymtab between '__ksymtab_pci_scan_bus_parented' (at offset 0x90) and '__ksymtab_pci_root_buses'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_assign_resources from __ksymtab between '__ksymtab_pci_bus_assign_resources' (at offset 0x4d0) and '__ksymtab_pci_bus_size_bridges'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_size_bridges from __ksymtab between '__ksymtab_pci_bus_size_bridges' (at offset 0x4e0) and '__ksymtab_pci_setup_cardbus'

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: Require vendor and device for new_id
Jean Delvare [Sat, 7 Apr 2007 15:21:28 +0000 (17:21 +0200)] 
PCI: Require vendor and device for new_id

Currently, there is no minimum number of fields required when adding
a new device ID to a PCI driver through the new_id sysfs file. It is
possible to add a new ID with only the vendor ID set, causing the
driver to attempt to attach to all PCI devices from that vendor. This
has been reported to happen accidentally:
  http://lists.lm-sensors.org/pipermail/lm-sensors/2007-March/019366.html
It is even possible to not even set the vendor ID field, causing the
driver to attempt to attach to _all_ the PCI devices.

This sounds dangerous and I fail to see any valid use of this
"feature". Thus I suggest that we now require at least the first two
fields (vendor ID and device ID) to be set. For what it's worth, this
is what the USB subsystem does.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: fix sysfs rom file creation for BIOS ROM shadows
Jesse Barnes [Sat, 24 Mar 2007 18:03:32 +0000 (11:03 -0700)] 
PCI: fix sysfs rom file creation for BIOS ROM shadows

At one time, if a BIOS ROM shadow was detected for the boot video
device (stored at offset 0xc0000), we'd set a special resource flag,
IORESOURCE_ROM_SHADOW, so that the sysfs ROM file code could handle
it properly.  That broke along the way somewhere though, so current
kernels will be missing 'rom' files in sysfs if the video device
doesn't have an explicit ROM BAR.

This patch fixes the regression by moving the video fixup quirk to a
little later in the boot cycle (to avoid having its work undone by
PCI resource allocation) and checking in the PCI sysfs code whether
a rom file should be created due to a shadow resource, which is also
moved to a little later in the boot cycle so it will occur after the
video fixup.  Tested and works on my i386 test box.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: kernel-doc fix
Randy Dunlap [Sat, 17 Mar 2007 02:55:52 +0000 (19:55 -0700)] 
PCI: kernel-doc fix

Warning(linux-2621-rc3g7/drivers/pci/pci.c:1283): No description found for parameter 'dev'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: Cleanup the includes of <linux/pci.h>
Jean Delvare [Tue, 6 Mar 2007 10:45:12 +0000 (02:45 -0800)] 
PCI: Cleanup the includes of <linux/pci.h>

I noticed that many source files include <linux/pci.h> while they do
not appear to need it. Here is an attempt to clean it all up.

In order to find all possibly affected files, I searched for all
files including <linux/pci.h> but without any other occurence of "pci"
or "PCI". I removed the include statement from all of these, then I
compiled an allmodconfig kernel on both i386 and x86_64 and fixed the
false positives manually.

My tests covered 66% of the affected files, so there could be false
positives remaining. Untested files are:

arch/alpha/kernel/err_common.c
arch/alpha/kernel/err_ev6.c
arch/alpha/kernel/err_ev7.c
arch/ia64/sn/kernel/huberror.c
arch/ia64/sn/kernel/xpnet.c
arch/m68knommu/kernel/dma.c
arch/mips/lib/iomap.c
arch/powerpc/platforms/pseries/ras.c
arch/ppc/8260_io/enet.c
arch/ppc/8260_io/fcc_enet.c
arch/ppc/8xx_io/enet.c
arch/ppc/syslib/ppc4xx_sgdma.c
arch/sh64/mach-cayman/iomap.c
arch/xtensa/kernel/xtensa_ksyms.c
arch/xtensa/platform-iss/setup.c
drivers/i2c/busses/i2c-at91.c
drivers/i2c/busses/i2c-mpc.c
drivers/media/video/saa711x.c
drivers/misc/hdpuftrs/hdpu_cpustate.c
drivers/misc/hdpuftrs/hdpu_nexus.c
drivers/net/au1000_eth.c
drivers/net/fec_8xx/fec_main.c
drivers/net/fec_8xx/fec_mii.c
drivers/net/fs_enet/fs_enet-main.c
drivers/net/fs_enet/mac-fcc.c
drivers/net/fs_enet/mac-fec.c
drivers/net/fs_enet/mac-scc.c
drivers/net/fs_enet/mii-bitbang.c
drivers/net/fs_enet/mii-fec.c
drivers/net/ibm_emac/ibm_emac_core.c
drivers/net/lasi_82596.c
drivers/parisc/hppb.c
drivers/sbus/sbus.c
drivers/video/g364fb.c
drivers/video/platinumfb.c
drivers/video/stifb.c
drivers/video/valkyriefb.c
include/asm-arm/arch-ixp4xx/dma.h
sound/oss/au1550_ac97.c

I would welcome test reports for these files. I am fine with removing
the untested files from the patch if the general opinion is that these
changes aren't safe. The tested part would still be nice to have.

Note that this patch depends on another header fixup patch I submitted
to LKML yesterday:
  [PATCH] scatterlist.h needs types.h
  http://lkml.org/lkml/2007/3/01/141

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: scatterlist.h needs types.h
Jean Delvare [Tue, 6 Mar 2007 10:45:12 +0000 (02:45 -0800)] 
PCI: scatterlist.h needs types.h

Most architectures' scatterlist.h use the type dma_addr_t, but omit to
include <asm/types.h> which defines it.  This could lead to build failures,
so let's add the missing includes.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: fix multiple definition of `queue_pushbutton_work'
Kristen Carlson Accardi [Wed, 21 Mar 2007 18:45:31 +0000 (11:45 -0700)] 
PCI: fix multiple definition of `queue_pushbutton_work'

Fix duplicate names in shpchp and pciehp.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agopciehp: Adapt to device driver model
Kenji Kaneshige [Tue, 6 Mar 2007 23:02:32 +0000 (15:02 -0800)] 
pciehp: Adapt to device driver model

This patch adapts PCIEHP driver to PCI device driver model.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agopciehp: Event handling rework
Kenji Kaneshige [Tue, 6 Mar 2007 23:02:26 +0000 (15:02 -0800)] 
pciehp: Event handling rework

The event handler of PCIEHP driver is unnecessarily very complex. In
addition, current event handler can only a fixed number of events at
the same time, and some of events would be lost if several number of
events happened at the same time.

This patch simplify the event handler using 'work queue', and it also
fix the above-mentioned issue.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agopci: New PCI-E reset API
Brian King [Fri, 6 Apr 2007 21:39:36 +0000 (16:39 -0500)] 
pci: New PCI-E reset API

Adds a new API which can be used to issue various types
of PCI-E reset, including PCI-E warm reset and PCI-E hot reset.
This is needed for an ipr PCI-E adapter which does not properly
implement BIST. Running BIST on this adapter results in PCI-E
errors. The only reliable reset mechanism that exists on this
hardware is PCI Fundamental reset (warm reset). Since driving
this type of reset is architecture unique, this provides the
necessary hooks for architectures to add this support.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Acked-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: Flush MSI-X table writes
Mitch Williams [Fri, 30 Mar 2007 18:54:08 +0000 (11:54 -0700)] 
PCI: Flush MSI-X table writes

This patch fixes a kernel bug which is triggered when using the
irqbalance daemon with MSI-X hardware.

Because both MSI-X interrupt messages and MSI-X table writes are posted,
it's possible for them to cross while in-flight.  This results in
interrupts being received long after the kernel thinks they're disabled,
and in interrupts being sent to stale vectors after rebalancing.

This patch performs a read flush after writes to the MSI-X table for
mask and unmask operations.  Since the SMP affinity is set while
the interrupt is masked, and since it's unmasked immediately after,
no additional flushes are required in the various affinity setting
routines.

This patch has been validated with (unreleased) network hardware which
uses MSI-X.

Revised with input from Eric Biederman.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agolibata: honour host controllers that want just one host
Linus Torvalds [Tue, 1 May 2007 00:43:48 +0000 (17:43 -0700)] 
libata: honour host controllers that want just one host

The Marvell IDE interface on my machine would hit a BUG_ON() in
lib/iomem.c because it was calling ata_pci_init_one() specifying just a
single port on the host, but that would actually end up trying to
initialize two ports, the second one with bogus information.

This fixes "ata_pci_init_one()" so that it actually passes down the
n_ports variable that it got from the low-level driver to the host
allocation routine ("ata_host_alloc_pinfo()"), which results in the ATA
layer actually having the correct port number information.

And in order to make it all work, I also needed to fix a few places that
had incorrectly hard-coded the fact that a host always had exactly two
ports (both ata_pci_init_bmdma() and ata_request_legacy_irqs() would
just always iterate over both ports).

Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopm: include EIO from errno-base.h
David Rientjes [Mon, 30 Apr 2007 22:09:56 +0000 (15:09 -0700)] 
pm: include EIO from errno-base.h

For backwards compatibility, call_platform_enable_wakeup() can return 0
instead of -EIO since we aren't guaranteed to have errno defined.

Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoAdd kvasprintf()
Jeremy Fitzhardinge [Mon, 30 Apr 2007 22:09:56 +0000 (15:09 -0700)] 
Add kvasprintf()

Add a kvasprintf() function to complement kasprintf().

No in-tree users yet, but I have some coming up.

[akpm@linux-foundation.org: EXPORT it]
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Keir Fraser <keir@xensource.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopower management: force pm_ops.valid callback to be assigned
Johannes Berg [Mon, 30 Apr 2007 22:09:55 +0000 (15:09 -0700)] 
power management: force pm_ops.valid callback to be assigned

This patch changes the docs and behaviour from "all states valid" to "no
states valid" if no .valid callback is assigned.  Users of pm_ops that only
need mem sleep can assign pm_valid_only_mem without any overhead, others
will require more elaborate callbacks.

Now that all users of pm_ops have a .valid callback this is a safe thing to
do and prevents things from getting messy again as they were before.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Looks-okay-to: Rafael J. Wysocki <rjw@sisk.pl>
Cc: <linux-pm@lists.linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopower management: implement pm_ops.valid for everybody
Johannes Berg [Mon, 30 Apr 2007 22:09:54 +0000 (15:09 -0700)] 
power management: implement pm_ops.valid for everybody

Almost all users of pm_ops only support mem sleep, don't check in .valid and
don't reject any others in .prepare so users can be confused if they check
/sys/power/state, especially when new states are added (these would then
result in s-t-r although they're supposed to be something different).

This patch implements a generic pm_valid_only_mem function that is then
exported for users and puts it to use in almost all existing pm_ops.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: linux-pm@lists.linux-foundation.org
Cc: Len Brown <lenb@kernel.org>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopower management: remove firmware disk mode
Johannes Berg [Mon, 30 Apr 2007 22:09:53 +0000 (15:09 -0700)] 
power management: remove firmware disk mode

This patch removes the firmware disk suspend mode which is the wrong approach,
it is supposed to be used for implementing firmware-based disk suspend but
cannot actually be used for that.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: <linux-pm@lists.linux-foundation.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agorework pm_ops pm_disk_mode, kill misuse
Johannes Berg [Mon, 30 Apr 2007 22:09:51 +0000 (15:09 -0700)] 
rework pm_ops pm_disk_mode, kill misuse

This patch series cleans up some misconceptions about pm_ops.  Some users of
the pm_ops structure attempt to use it to stop the user from entering suspend
to disk, this, however, is not possible since the user can always use
"shutdown" in /sys/power/disk and then the pm_ops are never invoked.  Also,
platforms that don't support suspend to disk simply should not allow
configuring SOFTWARE_SUSPEND (read the help text on it, it only selects
suspend to disk and nothing else, all the other stuff depends on PM).

The pm_ops structure is actually intended to provide a way to enter
platform-defined sleep states (currently supported states are "standby" and
"mem" (suspend to ram)) and additionally (if SOFTWARE_SUSPEND is configured)
allows a platform to support a platform specific way to enter low-power mode
once everything has been saved to disk.  This is currently only used by ACPI
(S4).

This patch:

The pm_ops.pm_disk_mode is used in totally bogus ways since nobody really
seems to understand what it actually does.

This patch clarifies the pm_disk_mode description.

It also removes all the arm and sh users that think they can veto suspend to
disk via pm_ops; not so since the user can always do echo shutdown >
/sys/power/disk, they need to find a better way involving Kconfig or such.

ACPI is the only user left with a non-zero pm_disk_mode.

The patch also sets the default mode to shutdown again, but when a new pm_ops
is registered its pm_disk_mode is selected as default, that way the default
stays for ACPI where it is apparently required.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: <linux-pm@lists.linux-foundation.org>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoreiserfs: suppress lockdep warning
Jeff Mahoney [Mon, 30 Apr 2007 22:09:50 +0000 (15:09 -0700)] 
reiserfs: suppress lockdep warning

We're getting lockdep warnings due to a post-2.6.21-rc7 bugfix.

The xattr_sem can never be taken in the manner described. Internal inodes
are protected by I_PRIVATE.  Add the appropriate annotation.

Cc: <stable@kernel.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoExtend print_symbol capability
Robert Peterson [Mon, 30 Apr 2007 22:09:48 +0000 (15:09 -0700)] 
Extend print_symbol capability

Today's print_symbol function dumps a kernel symbol with printk.  This
patch extends the functionality of kallsyms.c so that the symbol lookup
function may be used without the printk.  This is useful for modules that
want to dump symbols elsewhere, for example, to debugfs.  I intend to use
the new function call in the GFS2 file system (which will be a separate
patch).

[akpm@linux-foundation.org: build fix]
[clameter@sgi.com: sprint_symbol should return length of string like sprintf]
Signed-off-by: Robert Peterson <rpeterso@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Paulo Marques <pmarques@grupopie.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago[UDP]: Do not allow specific bind when wildcard bind exists.
David S. Miller [Mon, 30 Apr 2007 21:51:58 +0000 (14:51 -0700)] 
[UDP]: Do not allow specific bind when wildcard bind exists.

When allocating local ports, do not allow a bind to a port
with a specific local address when a bind to that port with
a wildcard local address already exists.

Noticed by Linus.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IPV4] UDP: Fix endianness bugs in hashing changes.
David S. Miller [Mon, 30 Apr 2007 20:35:29 +0000 (13:35 -0700)] 
[IPV4] UDP: Fix endianness bugs in hashing changes.

I accidently applied an earlier version of Eric Dumazet's patch, from
March 21st.  His version from March 30th didn't have these bugs, so
this just interdiffs to the correct patch.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Mon, 30 Apr 2007 15:59:57 +0000 (08:59 -0700)] 
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (56 commits)
  ieee1394: remove garbage from Kconfig
  ieee1394: more help in Kconfig
  ieee1394: ohci1394: Fix mistake in printk message.
  ieee1394: ohci1394: remove unnecessary rcvPhyPkt bit flipping in LinkControl register
  ieee1394: ohci1394: fix cosmetic problem in error logging
  ieee1394: eth1394: send async streams at S100 on 1394b buses
  ieee1394: eth1394: fix error path in module_init
  ieee1394: eth1394: correct return codes in hard_start_xmit
  ieee1394: eth1394: hard_start_xmit is called in atomic context
  ieee1394: eth1394: some conditions are unlikely
  ieee1394: eth1394: clean up fragment_overlap
  ieee1394: eth1394: don't use alloc_etherdev
  ieee1394: eth1394: omit useless set_mac_address callback
  ieee1394: eth1394: CONFIG_INET is always defined
  ieee1394: eth1394: allow MTU bigger than 1500
  ieee1394: unexport highlevel_host_reset
  ieee1394: eth1394: contain host reset
  ieee1394: eth1394: shorter error messages
  ieee1394: eth1394: correct a memset argument
  ieee1394: eth1394: refactor .probe and .update
  ...

17 years agoMerge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Mon, 30 Apr 2007 15:58:21 +0000 (08:58 -0700)] 
Merge branch 'for-linus' of /linux/kernel/git/jikos/hid

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: (21 commits)
  USB HID: don't warn on idVendor == 0
  USB HID: add 'quirks' module parameter
  USB HID: add support for dynamically-created quirks
  USB HID: clarify static quirk handling as squirks
  USB HID: encapsulate quirk handling into hid-quirks.c
  USB HID: EMS USBII device needs HID_QUIRK_MULTI_INPUT
  HID: update copyright and authorship macro
  HID: introduce proper zeroing of unused bits in output reports
  USB HID: add support for WiseGroup MP-8800 Quad Joypad
  USB HID: add FF support for Logitech Force 3D Pro Joystick
  USB HID: numlock quirk for dell W7658 keyboard
  USB HID: Logitech MX3000 keyboard needs report descriptor quirk
  USB HID: extend quirk for Logitech S510 keyboard
  USB HID: usbkbd/usbmouse - handle errors when registering devices
  USB HID: add QUIRK_HIDDEV for Belkin Flip KVM
  HID: enable dead keys on a belkin wireless keyboard
  USB HID: Thustmaster firestorm dual power v1 support
  USB HID: specify explicit size for hid_blacklist.quirks
  USB HID: fix retry & reset logic
  USB HID: consolidate vendor/product ids
  ...

17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 30 Apr 2007 15:14:42 +0000 (08:14 -0700)] 
Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  [IPV4] SNMP: Support OutMcastPkts and OutBcastPkts
  [IPV4] SNMP: Support InMcastPkts and InBcastPkts
  [IPV4] SNMP: Support InTruncatedPkts
  [IPV4] SNMP: Support InNoRoutes
  [SNMP]: Add definitions for {In,Out}BcastPkts
  [TCP] FRTO: RFC4138 allows Nagle override when new data must be sent
  [TCP] FRTO: Delay skb available check until it's mandatory
  [XFRM]: Restrict upper layer information by bundle.
  [TCP]: Catch skb with S+L bugs earlier
  [PATCH] INET : IPV4 UDP lookups converted to a 2 pass algo
  [L2TP]: Add the ability to autoload a pppox protocol module.
  [SKB]: Introduce skb_queue_walk_safe()
  [AF_IUCV/IUCV]: smp_call_function deadlock
  [IPV6]: Fix slab corruption running ip6sic
  [TCP]: Update references in two old comments
  [XFRM]: Export SPD info
  [IPV6]: Track device renames in snmp6.
  [SCTP]: Fix sctp_getsockopt_local_addrs_old() to use local storage.
  [NET]: Remove NETIF_F_INTERNAL_STATS, default to internal stats.
  [NETPOLL]: Remove CONFIG_NETPOLL_RX
  ...

17 years agoMerge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block
Linus Torvalds [Mon, 30 Apr 2007 15:12:39 +0000 (08:12 -0700)] 
Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block:
  [PATCH] elevator: elv_list_lock does not need irq disabling
  [BLOCK] Don't pin lots of memory in mempools
  cfq-iosched: speedup cic rb lookup
  ll_rw_blk: add io_context private pointer
  cfq-iosched: get rid of cfqq hash
  cfq-iosched: tighten queue request overlap condition
  cfq-iosched: improve sync vs async workloads
  cfq-iosched: never allow an async queue idling
  cfq-iosched: get rid of ->dispatch_slice
  cfq-iosched: don't pass unused preemption variable around
  cfq-iosched: get rid of ->cur_rr and ->cfq_list
  cfq-iosched: slice offset should take ioprio into account
  [PATCH] cfq-iosched: style cleanups and comments
  cfq-iosched: sort IDLE queues into the rbtree
  cfq-iosched: sort RT queues into the rbtree
  [PATCH] cfq-iosched: speed up rbtree handling
  cfq-iosched: rework the whole round-robin list concept
  cfq-iosched: minor updates
  cfq-iosched: development update
  cfq-iosched: improve preemption for cooperating tasks

17 years agoMerge branch 'for-2.6.22' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus...
Linus Torvalds [Mon, 30 Apr 2007 15:10:12 +0000 (08:10 -0700)] 
Merge branch 'for-2.6.22' of git://git./linux/kernel/git/paulus/powerpc

* 'for-2.6.22' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (255 commits)
  [POWERPC] Remove dev_dbg redefinition in drivers/ps3/vuart.c
  [POWERPC] remove kernel module option for booke wdt
  [POWERPC] Avoid putting cpu node twice
  [POWERPC] Spinlock initializer cleanup
  [POWERPC] ppc4xx_sgdma needs dma-mapping.h
  [POWERPC] arch/powerpc/sysdev/timer.c build fix
  [POWERPC] get_property cleanups
  [POWERPC] Remove the unused HTDMSOUND driver
  [POWERPC] cell: cbe_cpufreq cleanup and crash fix
  [POWERPC] Declare enable_kernel_spe in a header
  [POWERPC] Add dt_xlate_addr() to bootwrapper
  [POWERPC] bootwrapper: CONFIG_ -> CONFIG_DEVICE_TREE
  [POWERPC] Don't define a custom bd_t for Xilixn Virtex based boards.
  [POWERPC] Add sane defaults for Xilinx EDK generated xparameters files
  [POWERPC] Add uartlite boot console driver for the zImage wrapper
  [POWERPC] Stop using ppc_sys for Xilinx Virtex boards
  [POWERPC] New registration for common Xilinx Virtex ppc405 platform devices
  [POWERPC] Merge common virtex header files
  [POWERPC] Rework Kconfig dependancies for Xilinx Virtex ppc405 platform
  [POWERPC] Clean up cpufreq Kconfig dependencies
  ...

17 years ago[IPV4] SNMP: Support OutMcastPkts and OutBcastPkts
Mitsuru Chinen [Mon, 30 Apr 2007 07:48:20 +0000 (00:48 -0700)] 
[IPV4] SNMP: Support OutMcastPkts and OutBcastPkts

A transmitted IP multicast datagram should be counted as OutMcastPkts.
By the same token, a transmitted IP broadcast datagram should be
counted as OutBcastPkts.

Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IPV4] SNMP: Support InMcastPkts and InBcastPkts
Mitsuru Chinen [Mon, 30 Apr 2007 07:48:10 +0000 (00:48 -0700)] 
[IPV4] SNMP: Support InMcastPkts and InBcastPkts

A received IP multicast datagram should be counted as InMcastPkts.
By the same token, a received IP broadcast datagram should be
counted as InBcastPkts.

Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IPV4] SNMP: Support InTruncatedPkts
Mitsuru Chinen [Mon, 30 Apr 2007 07:46:30 +0000 (00:46 -0700)] 
[IPV4] SNMP: Support InTruncatedPkts

An IP datagram which is being discarded because the datagram frame
didn't carry enough data should be counted as InTruncatedPkts.

Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IPV4] SNMP: Support InNoRoutes
Mitsuru Chinen [Mon, 30 Apr 2007 07:45:49 +0000 (00:45 -0700)] 
[IPV4] SNMP: Support InNoRoutes

An IP datagram which is being discarded because of no routes in the
forwarding path should be counted as InNoRoutes.

Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SNMP]: Add definitions for {In,Out}BcastPkts
Mitsuru Chinen [Mon, 30 Apr 2007 07:45:02 +0000 (00:45 -0700)] 
[SNMP]: Add definitions for {In,Out}BcastPkts

The updated IP-MIB RFC (RFC4293) specifys new objects, InBcastPkts
and OutBcastPkts. This adds definitions for them.

Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP] FRTO: RFC4138 allows Nagle override when new data must be sent
Ilpo Järvinen [Mon, 30 Apr 2007 07:42:20 +0000 (00:42 -0700)] 
[TCP] FRTO: RFC4138 allows Nagle override when new data must be sent

This is a corner case where less than MSS sized new data thingie
is awaiting in the send queue. For F-RTO to work correctly, a
new data segment must be sent at certain point or F-RTO cannot
be used at all. RFC4138 allows overriding of Nagle at that
point.

Implementation uses frto_counter states 2 and 3 to distinguish
when Nagle override is needed.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP] FRTO: Delay skb available check until it's mandatory
Ilpo Järvinen [Mon, 30 Apr 2007 07:39:55 +0000 (00:39 -0700)] 
[TCP] FRTO: Delay skb available check until it's mandatory

No new data is needed until the first ACK comes, so no need to check
for application limitedness until then.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[XFRM]: Restrict upper layer information by bundle.
Masahide NAKAMURA [Mon, 30 Apr 2007 07:33:35 +0000 (00:33 -0700)] 
[XFRM]: Restrict upper layer information by bundle.

On MIPv6 usage, XFRM sub policy is enabled.
When main (IPsec) and sub (MIPv6) policy selectors have the same
address set but different upper layer information (i.e. protocol
number and its ports or type/code), multiple bundle should be created.
However, currently we have issue to use the same bundle created for
the first time with all flows covered by the case.

It is useful for the bundle to have the upper layer information
to be restructured correctly if it does not match with the flow.

1. Bundle was created by two policies
Selector from another policy is added to xfrm_dst.
If the flow does not match the selector, it goes to slow path to
restructure new bundle by single policy.

2. Bundle was created by one policy
Flow cache is added to xfrm_dst as originated one. If the flow does
not match the cache, it goes to slow path to try searching another
policy.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP]: Catch skb with S+L bugs earlier
Ilpo Järvinen [Mon, 30 Apr 2007 07:57:33 +0000 (00:57 -0700)] 
[TCP]: Catch skb with S+L bugs earlier

SACKED_ACKED and LOST are mutually exclusive with SACK, thus
having their sum larger than packets_out is bug with SACK.
Eventually these bugs trigger traps in the tcp_clean_rtx_queue
with SACK but it's much more informative to do this here.

Non-SACK TCP, however, could get more than packets_out duplicate
ACKs which each increment sacked_out, so it makes sense to do
this kind of limitting for non-SACK TCP but not for SACK enabled
one. Perhaps the author had the opposite in mind but did the
logic accidently wrong way around? Anyway, the sacked_out
incrementer code for non-SACK already deals this issue before
calling sync_left_out so this trapping can be done
unconditionally.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[PATCH] INET : IPV4 UDP lookups converted to a 2 pass algo
Eric Dumazet [Mon, 30 Apr 2007 07:26:00 +0000 (00:26 -0700)] 
[PATCH] INET : IPV4 UDP lookups converted to a 2 pass algo

Some people want to have many UDP sockets, binded to a single port but
many different addresses. We currently hash all those sockets into a
single chain.  Processing of incoming packets is very expensive,
because the whole chain must be examined to find the best match.

I chose in this patch to hash UDP sockets with a hash function that
take into account both their port number and address : This has a
drawback because we need two lookups : one with a given address, one
with a wildcard (null) address.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[L2TP]: Add the ability to autoload a pppox protocol module.
James Chapman [Mon, 30 Apr 2007 07:21:02 +0000 (00:21 -0700)] 
[L2TP]: Add the ability to autoload a pppox protocol module.

This patch allows a name "pppox-proto-nnn" to be used in modprobe.conf
to autoload a PPPoX protocol nnn.

Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years agoMerge branch 'cfq' into for-linus
Jens Axboe [Mon, 30 Apr 2007 07:09:27 +0000 (09:09 +0200)] 
Merge branch 'cfq' into for-linus

17 years ago[PATCH] elevator: elv_list_lock does not need irq disabling
Jens Axboe [Thu, 26 Apr 2007 12:41:53 +0000 (14:41 +0200)] 
[PATCH] elevator: elv_list_lock does not need irq disabling

It's never grabbed from irq context, so just make it plain spin_lock().

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years ago[BLOCK] Don't pin lots of memory in mempools
Jens Axboe [Mon, 2 Apr 2007 08:06:42 +0000 (10:06 +0200)] 
[BLOCK] Don't pin lots of memory in mempools

Currently we scale the mempool sizes depending on memory installed
in the machine, except for the bio pool itself which sits at a fixed
256 entry pre-allocation.

There's really no point in "optimizing" this OOM path, we just need
enough preallocated to make progress. A single unit is enough, lets
scale it down to 2 just to be on the safe side.

This patch saves ~150kb of pinned kernel memory on a 32-bit box.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years ago[SKB]: Introduce skb_queue_walk_safe()
James Chapman [Mon, 30 Apr 2007 07:07:31 +0000 (00:07 -0700)] 
[SKB]: Introduce skb_queue_walk_safe()

This patch provides a method for walking skb lists while inserting or
removing skbs from the list.

Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years agocfq-iosched: speedup cic rb lookup
Jens Axboe [Tue, 24 Apr 2007 19:23:53 +0000 (21:23 +0200)] 
cfq-iosched: speedup cic rb lookup

We often lookup the same queue many times in succession, so cache
the last looked up queue to avoid browsing the rbtree.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agoll_rw_blk: add io_context private pointer
Jens Axboe [Tue, 24 Apr 2007 19:17:33 +0000 (21:17 +0200)] 
ll_rw_blk: add io_context private pointer

To be used by as/cfq as they see fit.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: get rid of cfqq hash
Vasily Tarasov [Wed, 25 Apr 2007 10:29:51 +0000 (12:29 +0200)] 
cfq-iosched: get rid of cfqq hash

cfq hash is no more necessary.  We always can get cfqq from io context.
cfq_get_io_context_noalloc() function is introduced, because we don't
want to allocate cic on merging and checking may_queue.  In order to
identify sync queue we've used hash key = CFQ_KEY_ASYNC. Since hash is
eliminated we need to use other criterion: sync flag for queue is added.
In all places where we dig in rb_tree we're in current context, so no
additional locking is required.

Advantages of this patch: no additional memory for hash, no seeking in
hash, code is cleaner. But it is necessary now to seek cic in per-ioc
rbtree, but it is faster:
- most processes work only with few devices
- most systems have only few block devices
- it is a rb-tree

Signed-off-by: Vasily Tarasov <vtaras@openvz.org>
Changes by me:

- Merge into CFQ devel branch
- Get rid of cfq_get_io_context_noalloc()
- Fix various bugs with dereferencing cic->cfqq[] with offset other
  than 0 or 1.
- Fix bug in cfqq setup, is_sync condition was reversed.
- Fix bug where only bio_sync() is used, we need to check for a READ too

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: tighten queue request overlap condition
Jens Axboe [Fri, 20 Apr 2007 18:45:39 +0000 (20:45 +0200)] 
cfq-iosched: tighten queue request overlap condition

For tagged devices, allow overlap of requests if the idle window
isn't enabled on the current active queue.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: improve sync vs async workloads
Jens Axboe [Mon, 23 Apr 2007 06:33:33 +0000 (08:33 +0200)] 
cfq-iosched: improve sync vs async workloads

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: never allow an async queue idling
Jens Axboe [Thu, 19 Apr 2007 12:32:26 +0000 (14:32 +0200)] 
cfq-iosched: never allow an async queue idling

We don't enable it by default, don't let it get enabled during
runtime.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: get rid of ->dispatch_slice
Jens Axboe [Mon, 23 Apr 2007 06:26:36 +0000 (08:26 +0200)] 
cfq-iosched: get rid of ->dispatch_slice

We can track it fairly accurately locally, let the slice handling
take care of the rest.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: don't pass unused preemption variable around
Jens Axboe [Mon, 23 Apr 2007 06:25:00 +0000 (08:25 +0200)] 
cfq-iosched: don't pass unused preemption variable around

We don't use it anymore in the slice expiry handling.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: get rid of ->cur_rr and ->cfq_list
Jens Axboe [Thu, 19 Apr 2007 10:03:34 +0000 (12:03 +0200)] 
cfq-iosched: get rid of ->cur_rr and ->cfq_list

It's only used for preemption now that the IDLE and RT queues also
use the rbtree. If we pass an 'add_front' variable to
cfq_service_tree_add(), we can set ->rb_key to 0 to force insertion
at the front of the tree.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: slice offset should take ioprio into account
Jens Axboe [Fri, 20 Apr 2007 12:18:00 +0000 (14:18 +0200)] 
cfq-iosched: slice offset should take ioprio into account

Use the max_slice-cur_slice as the multipler for the insertion offset.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years ago[PATCH] cfq-iosched: style cleanups and comments
Jens Axboe [Thu, 26 Apr 2007 10:54:48 +0000 (12:54 +0200)] 
[PATCH] cfq-iosched: style cleanups and comments

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: sort IDLE queues into the rbtree
Jens Axboe [Wed, 18 Apr 2007 18:13:32 +0000 (20:13 +0200)] 
cfq-iosched: sort IDLE queues into the rbtree

Same treatment as the RT conversion, just put the sorted idle
branch at the end of the tree.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: sort RT queues into the rbtree
Jens Axboe [Wed, 18 Apr 2007 18:01:57 +0000 (20:01 +0200)] 
cfq-iosched: sort RT queues into the rbtree

Currently CFQ does a linked insert into the current list for RT
queues. We can just factor the class into the rb insertion,
and then we don't have to treat RT queues in a special way. It's
faster, too.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years ago[PATCH] cfq-iosched: speed up rbtree handling
Jens Axboe [Thu, 26 Apr 2007 10:53:50 +0000 (12:53 +0200)] 
[PATCH] cfq-iosched: speed up rbtree handling

For cases where the rbtree is mainly used for sorting and min retrieval,
a nice speedup of the rbtree code is to maintain a cache of the leftmost
node in the tree.

Also spotted in the CFS CPU scheduler code.

Improved by Alan D. Brunelle <Alan.Brunelle@hp.com> by updating the
leftmost hint in cfq_rb_first() if it isn't set, instead of only
updating it on insert.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: rework the whole round-robin list concept
Jens Axboe [Fri, 20 Apr 2007 12:27:50 +0000 (14:27 +0200)] 
cfq-iosched: rework the whole round-robin list concept

Drawing on some inspiration from the CFS CPU scheduler design, overhaul
the pending cfq_queue concept list management. Currently CFQ uses a
doubly linked list per priority level for sorting and service uses.
Kill those lists and maintain an rbtree of cfq_queue's, sorted by when
to service them.

This unfortunately means that the ionice levels aren't as strong
anymore, will work on improving those later. We only scale the slice
time now, not the number of times we service. This means that latency
is better (for all priority levels), but that the distinction between
the highest and lower levels aren't as big.

The diffstat speaks for itself.

 cfq-iosched.c |  363 +++++++++++++++++---------------------------------
 1 file changed, 125 insertions(+), 238 deletions(-)

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: minor updates
Jens Axboe [Tue, 17 Apr 2007 10:47:55 +0000 (12:47 +0200)] 
cfq-iosched: minor updates

- Move the queue_new flag clear to when the queue is selected
- Only select the non-first queue in cfq_get_best_queue(), if there's
  a substantial difference between the best and first.
- Get rid of ->busy_rr
- Only select a close cooperator, if the current queue is known to take
  a while to "think".

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: development update
Jens Axboe [Wed, 25 Apr 2007 10:44:27 +0000 (12:44 +0200)] 
cfq-iosched: development update

- Implement logic for detecting cooperating processes, so we
  choose the best available queue whenever possible.

- Improve residual slice time accounting.

- Remove dead code: we no longer see async requests coming in on
  sync queues. That part was removed a long time ago. That means
  that we can also remove the difference between cfq_cfqq_sync()
  and cfq_cfqq_class_sync(), they are now indentical. And we can
  kill the on_dispatch array, just make it a counter.

- Allow a process to go into the current list, if it hasn't been
  serviced in this scheduler tick yet.

Possible future improvements including caching the cfqq lookup
in cfq_close_cooperator(), so we don't have to look it up twice.
cfq_get_best_queue() should just use that last decision instead
of doing it again.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agocfq-iosched: improve preemption for cooperating tasks
Jens Axboe [Wed, 14 Feb 2007 18:59:49 +0000 (19:59 +0100)] 
cfq-iosched: improve preemption for cooperating tasks

When testing the syslet async io approach, I discovered that CFQ
sometimes didn't perform as well as expected. cfq_should_preempt()
needs to better check for cooperating tasks, so fix that by allowing
preemption of an equal priority queue if the recently queued request
is as good a candidate for IO as the one we are currently waiting for.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years ago[POWERPC] Remove dev_dbg redefinition in drivers/ps3/vuart.c
Paul Mackerras [Mon, 30 Apr 2007 03:03:39 +0000 (13:03 +1000)] 
[POWERPC] Remove dev_dbg redefinition in drivers/ps3/vuart.c

Commit 404d5b185b4eb56d6fa2f7bd27833f8df1c38ce4 changed the definition
of dev_dbg in the !DEBUG case from being a #define to being a static
inline.  There was code in drivers/ps3/vuart.c to do exactly that,
which fails to compile now.  This fixes it by removing the redefinition,
as the redefinition is now superfluous.

Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years agoMerge branch 'linux-2.6' into for-2.6.22
Paul Mackerras [Mon, 30 Apr 2007 02:38:01 +0000 (12:38 +1000)] 
Merge branch 'linux-2.6' into for-2.6.22

17 years ago[POWERPC] remove kernel module option for booke wdt
Dave Jiang [Fri, 13 Apr 2007 22:25:24 +0000 (08:25 +1000)] 
[POWERPC] remove kernel module option for booke wdt

Remove option of making booke_wdt into a kernel module. This watchdog
cannot be disabled. No point being a kernel module.

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Avoid putting cpu node twice
John Rigby [Fri, 6 Apr 2007 22:57:37 +0000 (08:57 +1000)] 
[POWERPC] Avoid putting cpu node twice

Call of_find_node_by_type with NULL instead of np
so the cpu node does not get put twice.
This was causing kref_put warnings.

Signed-off-by: John Rigby <jrigby@freescale.com>
Acked-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] Spinlock initializer cleanup
Thomas Gleixner [Sun, 29 Apr 2007 16:10:39 +0000 (16:10 +0000)] 
[POWERPC] Spinlock initializer cleanup

Use DEFINE_SPINLOCK instead of initializing spinlocks to
SPIN_LOCK_UNLOCKED, since DEFINE_SPINLOCK is better for lockdep.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago[POWERPC] ppc4xx_sgdma needs dma-mapping.h
Andrew Morton [Thu, 26 Apr 2007 07:07:05 +0000 (00:07 -0700)] 
[POWERPC] ppc4xx_sgdma needs dma-mapping.h

For dma_alloc_*()

Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>