V4L/DVB (6906): tda18271: rename tda18271_calc_* functions to tda18271_lookup_*

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6905): tda18271: check ID register during attach

Identify the silicon during attach, return NULL if unsupported device.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6904): tda18271: divider byte 1, bit 7 is always 0

Bit 7 of both Main Divider byte 1 and Cal Divider byte 1 is always zero.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6903): mt312: CodingStyle fix

Fixes all occurences of assignment in if

checkpatch marks them as ERROR.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Reviewed-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6901): Kconfig: VIDEO_CX23885 selects TUNER_TDA8290 and DVB_TDA18271

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6900): cx23885: enable EZ-QAM mode for Hauppauge WinTV HVR-1800

Add module option 'alt_tuner' disabled by default.

When set to one, the dvb_frontend of HVR1800 will consist of:
s5h1409 demod + tda18271 tuner

When set zero (default), the dvb_frontend of HVR1800 will consist of:
s5h1409 demod + mt2131 tuner

If the tda18271 is used in digital mode, you will not be able to
tune an analog channel at the same time.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6899): Kconfig: VIDEO_CX23885 must select TUNER_XC2028 if !DVB_FE_CUSTOMIZE

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6898): cx23885: add support for Hauppauge WinTV HVR-1500

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6897): xc2028: ignore HAS_IF during specific S-Code type searches

If we are selecting the S-Code firmware to load by name, then we must mask
off the HAS_IF bit during the search.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6896): ivtv: add XC2028 support for Club3D cards

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6894): xc5000: fix build warning

Fix the following build warning:

xc5000.c:560: warning: format '%d' expects type 'int',
      but argument 2 has type 'size_t'

On many architectrues size_t is unsigned long, and may not be printed with %d.
Use %Zu instead.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6893): tuner-xc2028: fix xc2028_attach function

xc2028_attach was returning an integer when disabled from the build, where it
should instead be returning NULL.  Declare xc2028_attach as type dvb_frontend *
instead of void *.

The prototype declaration must be marked as extern in the header.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6892): xc5000: fix build when DVB_TUNER_XC5000 is disabled

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6890): tda18271: fix typo in RF tracking filter calibration

We want to set bits 1 & 2 on easy programming byte 4, not extended byte 4.

Thanks to David Wong for pointing this out.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Cc: David Wong <davidtlwong@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6888): Add Hauppauge tuner type 150 defintion

Add Hauppauge tuner type 150 defintion.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6887): Avoid 'unknown model' message for the HVR1500-Q

Avoid 'unknown model' message for the HVR1500-Q

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6886): xc5000: Cleanups of types, result codes etc

This translates much of the xceive coding style, adds
some result codes and generally cleans up whitespace
and function arguments.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6885): Add support for the Hauppauge HVR1500Q

The express card ATSC/QAM tuner.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6884): Add support for the Xceive xc5000 silicon tuner

This is an all formats tuner, QAM, ATSC, DVB-T and others.
Only ATSC and QAM have been tested.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6882): dvb_frontend: release analog demod in dvb_frontend_detach

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6881): include struct analog_demod_ops directly inside struct dvb_frontend

Rather than using a pointer, include struct analog_demod_ops directly
inside struct dvb_frontend.  This will allow us to use dvb_attach in
the future, along with removing the need to check the ops structure
before having to check the pointer to the method being called.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6880): kill tuner-driver.h

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6879): move struct analog_tuner_ops into dvb_frontend.h

struct analog_tuner_ops no longer has any dependencies specific
to v4l2, so we can move this into dvb_frontend.h with the rest
of the tuning structures.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6878): tuner: remove extraneous variable declaration

tuner_count is already declared as "extern unsigned const int"
in <media/tuner-types.h>  -- Remove it from tuner-driver.h

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6875): tuner-xc2028: ATSC requires 1.75 MHz tuning offset

In my testing yesterday, I was using a scan file tailored specifically
for a unique test situation -- As it turns out, this scan file was bad,
and I will use the one included inside dvb-apps for testing for now on.

I've tested with other ATSC tuners just to confirm, using:

us-ATSC-center-frequencies-8VSB

Anyhow, as it turns out, the tuner-xc2028 *does* require a tuning offset
for ATSC.  Even though the linux-dvb api passes in center frequencies
from userspace, apparantly the xceive firmware is already factoring in
the tuning offset to center.

In order to make the device function using the same scan files /
channels.conf configurations as other atsc devices, we must offset by
1.75 MHz.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6874): removes duplicated KERN_DEBUG flags from dprintk calls in mt312.c

        do { \
                if (debug) printk(KERN_DEBUG "mt312: " args); \
        } while (0)

So no caller need to specify KERN_DEBUG.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6873): Fixes issues listed by checkpatch

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6869): cs5345: new i2c driver

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6868): i2c-id.h: add I2C_DRIVERID_CS5345

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6867): saa7127: CodingStyle cleanups

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6866): msp3400: CodingStyle cleanups

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6865): vp27smpx: CodingStyle cleanup

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6864): upd64031a: CodingStyle cleanup

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6863): upd64083: CodingStyle cleanups

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6862): ivtv: really remove i2c legacy support from drivers that no longer need it

For some reason the include header wasn't changed from v4l2-i2c-drv-legacy.h
to v4l2-i2c-drv.h in the previous patch. This is now corrected.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6861): cx2341x: command argument should be u32 instead of int

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6860): tveeprom: CodingStyle cleanup

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6859): tveeprom: add support for Hauppauge models 74xxx

Thanks to Steve Toth from Hauppauge with providing me with the information
needed to add support for these models.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6858): Fix offset for ATSC

ATSC works with offset=0

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6857): cx23885: correctly join I2C writes and reads from same address

When an I2C message specifies a write then a read from the same I2C address,
we need to tell the chip to not release the bus between the message parts.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6856): zl10353: improve tuning parameters and update register map

Some more I2C traces and a experimentation with register values on
both the ZL10353 and MT352 mean that I can now guess at what more
of the ZL10353 registers do.

Guess at the registers' names (based on the equivalent names in MT352)
and update set_parameters/get_parameters with the new knowledge.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6855): xc2028: select DTV78 firmware if tuning 7MHz VHF / 8MHz UHF

It seems that the DTV78 firmware is intended for use in locations where
VHF channels have 7MHz bandwidth and UHF channels have 8MHz bandwidth.
If we switch to DTV78 firmware when we detect this condition, we can
avoid firmware reloads when switching between VHF and UHF transponders.

Place the state for this in the control structure so that card drivers
can hint to us to use DTV78 firmware from the first tuning attempt.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6854): xc2028: be more specific about when applying offset for 7MHz channels

We have been inserting a mystery 500kHz offset for tuning 7MHz channels,
however some experimentation reveals it is only needed under certain
conditions with specific firmware combinations.  Document these and only
apply the offset when we know it is required.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6853): xc2028: check HAS_IF flag against table

When searching for the right S-Code table to load, check the HAS_IF flag
against the firmware we are checking instead of against the the "type"
requested.  We already ignore the scode type requested if the caller passed
an int_freq; this makes the search by frequency consistent with that behaviour.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6852): xc2028: s-code offset should not modify internal control structure

Don't modify the control structure that was provided at attach when applying
an offset to the S-Code, otherwise it will be incorrect on subsequent tunes.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6851): xc2028: include int_freq in firmware version display

Add "int_freq" to the debugging output when selecting firmware and the
HAS_IF flag when dumping firmware during load.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (em28xx): Add support for Pinnacle Dazzle DVC 100

The patch below adds the "Pinnacle Dazzle DVC 100" to the list of
cards supported by the em28xx driver. As the configuration is the same
as the DVC 90 one, it simply adds a new USB ID to the list of devices
supported by the DVC 90 configuration.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6848): bttv: check pci_register_driver() error

Check pci_register_driver() error in module_init.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6846): tda9887: initialize mode to T_STANDBY at startup

Ensure that the audio is muted at attach-time

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6845): tuner: remove unneeded #includes from tuner-driver.h

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6844): tuner: remove struct tuner from tuner-driver.h

struct tuner holds state for tuner-core, only -- move it into tuner-core.c

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6843): tda9887: use printk macros from tuner-i2c.h

replace tda9887_info and tda9887_dbg printk macros with
tuner_info and tuner_dbg, defined in tuner-i2c.h

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6842): tda9887: remove dependency on struct tuner

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6841): tda9887: maintain private state independent of struct tuner

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6840): tuner: convert tda9887 to use TUNER_SET_CONFIG

Use TUNER_SET_CONFIG to set configuration in tda9887's private state
structure, rather than storing tda9887-specific configuration within
struct tuner.

Update handling of TUNER_SET_CONFIG by tuner-core, to call
&t->fe.ops.analog_demod_ops rather than &t->fe.ops.tuner_ops

analog_demod_ops.set_config passes the request to tuner_ops.set_config,
so this does not break other drivers.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6839): tuner: add set_config to struct analog_tuner_ops

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6838): tda9887: remove references to struct tuner from printk macros

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6837): Convert cx88_input.audioroute to a bitfield

Prevent us from wasting some extra bytes of memory

Thanks to Trent Piepho, for pointing this out.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6836): Fix CodingStyle troubles caused by the previous cx88 commits

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6834): cx88-video: Enable selection of the WM8775 for cx88 cards

The auto selection of pertinent helper chips (VIDEO_HELPER_CHIPS_AUTO)
should select the wm8775 driver, which is used by at least one
Conexant 2388x based card (Hauppauge HVR-1300), if VIDEO_CX88 is
selected.

Signed-off-by: Frej Drejhammar <frej.drejhammar@gmail.com>
Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6833): Don't limit cx88 audio routing to blackbird boards

All cx2388 boards need the line-in audio to be routed from an external ADC
(refered to as "ADC mode" in the spec sheet), since the chip is uncapable
of dealing with baseband audio directly.
So... this patch enables normal mode when using the tuner (TV or Radio), and
enables ADC mode with any other source. It'll probably only work with boards
that have supported ADCs (such as the Wolfson wm9775)

Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6832): cx88-blackbird: don't mute audio when stopping the codec

We should not mute the audio input when we stop the codec,
because it will interfere with the live uncompressed stream.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Reviewed-by: Jelle Foks <jelle@foks.8m.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6831): Audio routes fix for blackbird boards with the wm8775 ADC

Fix lack of audio on the MPEG-2 stream of wm8775 based blackbirds.

The wm8775 module initializes the audio input at "route 2", which doesn't
hold true for all boards. The HVR-1300, for example, uses route 1 for
tuner audio, and route 2 for baseband. So we must route the audio to the
proper input depending on what video input is being used.

Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6830): cx88-blackbird: remove unnecessary encoder unmute

Remove the unnecessary BLACKBIRD_UNMUTE calls to the mpeg encoder in
cx88-blackbird.c

The encoder is never muted, hence unmuting should then only be necessary
once after hardware initialization.

I tested this from warm boots and cold boots (with long power down time
to ensure the sram in the chip is emptied), and found that after the
firmware upload the encoder is apparently not muted, making the unmutes
unnecessary.

Signed-off-by: Jelle Foks <jelle@foks.8m.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6829): cx88-blackbird: remove unnecessary msleep()'s

Remove the unnecessary msleep()'s in cx88-blackbird.c

Signed-off-by: Jelle Foks <jelle@foks.8m.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6828): cx88-blackbird: audio improvements

This patch should fix the 'muted audio' and 'raspy audio' problem for
mpeg2 streams out of cx88-blackbird devices.

Especially mythtv users would find that the audio would often sound bad
(aliased, or 'raspy'), mainly related to channel changes, many (all?)
other users would find that there was no audio at all in the mpeg data
from the encoder chip, unless the audio was manually unmuted.

The patch includes the following modifications:

Don't actually start the mpeg2 encoder until the device is read from
by the application.

Wait until the audio is stable for at least 400ms before starting the
mpeg encoder.

Mute/Unmute the audio when starting/stopping the mpeg encoder.

Stop the mpeg encoder when changing parameters and when changing tuner
frequency.

Add a variable 'mpeg_active' to struct cx8802_dev to allow tracking of
whether or not the mpeg2 encoder is active.

Load the firmware on cx88-blackbird driver load.

Signed-off-by: Jelle Foks <jelle@foks.8m.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6827): Auto-selects D2633 for ATSC

ATSC standard-specific firmware is D2633 on both v2.5 and v2.7. Better to
auto-select this firmware, overriding ctrl.d2633.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6822): s5h1409: use VSB IF frequency ( 44 / 5.38 MHz ) unless otherwise specified

use VSB IF frequency ( 44 / 5.38 MHz ) if qam_if is invalid or unspecified

Acked-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6821): s5h1409: fix IF frequency configuration

On the s5h1409 demod, the IF frequency for VSB is limited to 44 / 5.38 MHz.

Hardcode VSB IF frequency within the driver to 44 / 5.38 MHz.
QAM IF frequency remains configurable via attach-time configuration.

Acked-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6818): git-dvb: drivers/media/dvb/frontends/zl10353.c: avoid 64-bit divide

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6817): Cleanup kernel thread and provide overrun detection

The previous code were a little bit messy. Cleans it up.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6816): Add proper locking for buffer filling

Avoids de-alocating buffers before finishing to fill a buffer

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6815): Fix vivi internal debug messages

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6812): media: video: usbvision: remove ctrlUrbLock

The ctrlUrbLock has all it's users commented out, and so it's unused.  This
patch removes it.

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6811): media-video-usbvision-add-mutex_unlock-to-error-paths-fix

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6810): media: video: usbvision: add mutex_unlock() to error paths

There are a few error paths which don't unlock the usbvision->lock.

So I've added mutex_unlock() calls to fix those paths.

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6809): git-dvb: drivers/media/video/et61x251/et61x251_core.c: fix warnings

drivers/media/video/et61x251/et61x251_core.c:390: warning: 'et61x251_i2c_read' defined but not used
drivers/media/video/et61x251/et61x251_core.c:397: warning: 'et61x251_i2c_write' defined but not used

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6808): git-dvb: fix build in drivers/media/dvb/frontends/tda18271.h

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6807): fix debug enable

The changes at vivi_template make debug option to not work properly.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6806): Allow emulating changes of video std by vivi

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6805): video std is a bitmask. Better to print in hexa

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6804): __videobuf_read_start is static

Thanks to Jean Delvare <khali@linux-fr.org> for pointing this.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6801): tda18271: pass i2c gate configuration into tda18271_attach()

If we pass TDA18271_GATE_DIGITAL into tda18271_attach(), it will always try to
use the digital demodulator's i2c gate.

If we pass TDA18271_GATE_ANALOG into tda18271_attach(), it will always try to
use the analog demodulator's i2c gate.

If we pass TDA18271_GATE_AUTO into tda18271_attach(), it will try to use the
analog demodulator's i2c gate when tuning in analog mode, and it will try to
use the digital demodulator's i2c gate when tuning in digital mode.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6800): tda18271: use an enum rather than an integer to store analog / digital state

Use an enum rather than an integer #define to store analog / digital state.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6795): Add EXPORT_SYMBOL_GPL to the saa7134 video control routines

Those newer functions are used by saa7134-empress. Adds export for them:
+EXPORT_SYMBOL_GPL(saa7134_g_ctrl);
+EXPORT_SYMBOL_GPL(saa7134_s_ctrl);
+EXPORT_SYMBOL_GPL(saa7134_queryctrl);

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6793): Convert saa7134-empress to video_ioctl2

saa7134 were converted to video_ioctl2, but saa7134_empress weren't. This broke
saa7134-empress, since it were dependent of saa7134_common_ioctl.

With the conversion, the module had a size decrease of 436 bytes on x86_64:

   text    data     bss     dec     hex filename
   5196    4912       4   10112    2780 old/saa7134-empress.ko
   4760    4912       4    9676    25cc new/saa7134-empress.ko

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6792): Fix VBI support

VBI were broken, since there weren't any function handlers for it. This patch
fixes it, by removing the vbi_template, using, instead video_template.

This also saves some space at the data segment.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6791): Rename all vidioc_ to saa7134_

Some functions are used also by saa7134-empress, and need to be exported. To
avoid namespace confusion, rename all of them to saa7134_

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6789): tuner: use char *name instead of 128 byte fixed array for demod info

Don't waste 128 bytes of memory for a name that might not actually need it.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6788): tda8290: fix codingstyle, open brace following struct on the same line

Fix codingstyle issue discovered after using new checkpatch.pl

 ERROR: open brace '{' following struct go on the same line
 396: FILE: linux/drivers/media/video/tda8290.h:24:
+struct tda829x_config
+{

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6787): tuner: bug-fix: default mode was set to bogus value

Fix type inconsistency in t->mode value, causing the following:

tuner' 1-0043: freq set: unknown mode: 0x0004!

(only visible with tuner debug enabled)

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6786): tuner: add struct analog_demod_info to struct analog_tuner_ops

Store the analog demodulator name in fe.ops.analog_demod_ops.info.name

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6785): tda8290: remove dependency on struct tuner

- remove dependency of tda8290 module on struct tuner
- move tuner_foo printk macros from tuner-driver.h into tuner-core.c
- clean up #includes of tuner-i2c.h / tuner-driver.h

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6784): tda8290: prevent possible memory leak

Always call tda829x_release if tda829x_attach fails for a reason
other than failure to allocate memory for private structure.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6783): tuner: combine set_tv_freq and set_radio_freq into a single set_params method

We can tell whether we are tuning television or radio by testing for
struct analog_parameters *params->mode == V4L2_TUNER_RADIO

There is no longer any need for separate set_tv_freq and
set_radio_freq functions in the analog tuner demodulator modules.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6782): tda8290: access frontend structure directly, where possible

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6776): ivtv: Some general fixes

Fix "warning: Using plain integer as NULL pointer".
Convert 'x < y ? x : y' to use min() instead.

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6773): pvrusb2: rework device descriptor layout

The pvrusb2 driver tries to keep all device specific attributes in a
single data structure in one source file.  This change further cleans
up how that table is set up.  We now try to group everything together
for each specific device, and the number of symbols exported from this
module has now been reduced to a single global.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6772): pvrusb2: Remove obsolete (and misleading) comment

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (6771): pvrusb2: Remove old obsolete CONFIG flags for pvrusb2 driver

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>