From 690103137267e9ed893febf7ff061af63e8235a9 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 18 Mar 2009 18:11:51 -0700 Subject: [PATCH] bnx2: Fix problem of using wrong IRQ handler. The MSI-X handler was chosen before the call to pci_enable_msix(). If MSI-X was not available, the wrong MSI-X handler would be used in INTA mode. This would cause a screaming interrupt problem because INTA would not be cleared by the MSI-X handler. Fixed by assigning MSI-X handler after pci_enable_msix() returns successfully. Also update version to 1.9.3. Thomas Chenault helped us find this problem. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 6500b7c4739..6b6530ffdf1 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -57,8 +57,8 @@ #define DRV_MODULE_NAME "bnx2" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "1.9.2" -#define DRV_MODULE_RELDATE "Feb 11, 2009" +#define DRV_MODULE_VERSION "1.9.3" +#define DRV_MODULE_RELDATE "March 17, 2009" #define RUN_AT(x) (jiffies + (x)) @@ -5843,9 +5843,6 @@ bnx2_enable_msix(struct bnx2 *bp, int msix_vecs) for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) { msix_ent[i].entry = i; msix_ent[i].vector = 0; - - snprintf(bp->irq_tbl[i].name, len, "%s-%d", dev->name, i); - bp->irq_tbl[i].handler = bnx2_msi_1shot; } rc = pci_enable_msix(bp->pdev, msix_ent, BNX2_MAX_MSIX_VEC); @@ -5854,8 +5851,11 @@ bnx2_enable_msix(struct bnx2 *bp, int msix_vecs) bp->irq_nvecs = msix_vecs; bp->flags |= BNX2_FLAG_USING_MSIX | BNX2_FLAG_ONE_SHOT_MSI; - for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) + for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) { bp->irq_tbl[i].vector = msix_ent[i].vector; + snprintf(bp->irq_tbl[i].name, len, "%s-%d", dev->name, i); + bp->irq_tbl[i].handler = bnx2_msi_1shot; + } } static void -- 2.32.0.93.g670b81a890