Wine is free software, released under the GNU LGPL; see the file
LICENSE for the details.
+
2. QUICK START
Whenever you compile from source, it is recommended to use the Wine
./tools/wineinstall
-Run programs as "wine [options] program". For more information and
-problem resolution, read the rest of this file, the Wine man page,
-the files in the documentation directory of the Wine source
-(see "DOCUMENTATION"), and especially the wealth of information
-found at http://www.winehq.org.
+Run programs as "wine program". For more information and problem
+resolution, read the rest of this file, the Wine man page, and
+especially the wealth of information found at http://www.winehq.org.
+
3. REQUIREMENTS
To compile and run Wine, you must have one of the following:
Linux version 2.0.36 or above
- FreeBSD 5.3 or later
- Solaris x86 2.5 or later
+ FreeBSD 7.0 or later
+ Solaris x86 9 or later
NetBSD-current
+ Mac OS X 10.4 or later
As Wine requires kernel-level thread support to run, only the operating
-systems mentioned above are supported.
-Other operating systems which support kernel threads may be supported
-in the future.
+systems mentioned above are supported. Other operating systems which
+support kernel threads may be supported in the future.
Linux info:
While Linux 2.2.x should still work and Linux 2.0.x may still work
(older 2.0.x versions had thread-related crashes),
- it's best to have a current kernel such as 2.4.x.
+ it's best to have a current kernel such as 2.4.x or 2.6.x.
FreeBSD info:
- Wine should build on FreeBSD 4.x and FreeBSD 5.x before 5.3, but will
- generally not work on these systems due to issues with threading and
- mmap(). In fact, even on FreeBSD 5.3 you will need the kernel patch
- posted at <http://www.freebsd.org/cgi/query-pr.cgi?pr=73092>.
-
- More information can be found in the FreeBSD ports tree at
- <ftp://ftp.freebsd.org/pub/FreeBSD/ports/ports/emulators/wine/>.
+ Wine will generally not work properly on versions before FreeBSD
+ 7.0. FreeBSD 6.3 has patches available to allow Wine to run. See
+ <http://wiki.freebsd.org/Wine> for more information.
Solaris info:
You will most likely need to build Wine with the GNU toolchain
Make sure you have the USER_LDT, SYSVSHM, SYSVSEM, and SYSVMSG options
turned on in your kernel.
+Mac OS X info:
+ You need Xcode 2.4 or later to build properly on x86.
Supported file systems:
- Wine should run on most file systems. However, Wine will fail to start
- if umsdos is used for the /tmp directory. A few compatibility problems have
- also been reported using files accessed through Samba. Also, as NTFS
- can only be used safely with readonly access for now, we recommend against
- using NTFS, as Windows programs need write access almost everywhere.
- In case of NTFS files, copy over to a writable location.
+ Wine should run on most file systems. A few compatibility problems
+ have also been reported using files accessed through Samba. Also,
+ NTFS does not provide all the file system features needed by some
+ applications. Using a native Linux file system such as ext3 is
+ recommended.
Basic requirements:
You need to have the X11 development include files installed
- (called xlib6g-dev in Debian and XFree86-devel in RedHat).
-
-Build tool requirements:
- On x86 Systems gcc >= 2.7.2 is required.
- Versions earlier than 2.7.2.3 may have problems when certain files
- are compiled with optimization, often due to problems with header file
- management. pgcc currently doesn't work with Wine. The cause of this problem
- is unknown.
+ (called xlib6g-dev in Debian and XFree86-devel in Red Hat).
Of course you also need "make" (most likely GNU make).
- You also need flex version 2.5 or later and bison. If you are
- using RedHat or Debian, install the flex and bison packages.
+ You also need flex version 2.5 or later and bison.
Optional support libraries:
- If you want CUPS printing support, please install both cups and cups-devel
- packages.
+ Configure will display notices when optional libraries are not found
+ on your system. See http://wiki.winehq.org/Recommended_Packages for
+ hints about the packages you should install.
- For the automatic processing of the test suite scripts, you also need
- libperl development header support (libperl-dev package on Debian).
-
-For requirements in case you intend to build the documentation yourself,
-see "DOCUMENTATION" section.
+ On 64-bit platforms you have to make sure to install the 32-bit
+ versions of these libraries; see http://wiki.winehq.org/WineOn64bit
+ for details.
4. COMPILATION
top-level directory of the release (the one containing this README
file). Then do a "make clean", and patch the release with:
- gunzip -c patch-file | patch -p1
+ bunzip2 -c patch-file | patch -p1
where "patch-file" is the name of the patch file (something like
-Wine-yymmdd.diff.gz). You can then re-run "./configure", and then
+wine-1.0.x.diff.bz2). You can then re-run "./configure", and then
run "make depend && make".
+
5. SETUP
Once Wine has been built correctly, you can do "make install"; this
first. Try either "dpkg -r wine" or "rpm -e wine" or "make uninstall"
before installing.
-If you want to read the documentation supplied with the Wine source,
-see the "DOCUMENTATION" section.
-
-Wine requires a configuration file named named "config" in your
-~/.wine directory. The format of this file is explained in the config file
-man page (documentation/wine.conf.man).
-The file documentation/samples/config contains an example configuration file
-which has to be adapted and copied to the location mentioned above.
+Once installed, you can run the "winecfg" configuration tool. See the
+Support area at http://www.winehq.org/ for configuration hints.
-See the Support area at http://www.winehq.org/ for further
-configuration hints.
-
-In case of library loading errors
-(e.g. "Error while loading shared libraries: libntdll.so"), make sure
-to add the library path to /etc/ld.so.conf and run ldconfig as root.
6. RUNNING PROGRAMS
When invoking Wine, you may specify the entire path to the executable,
or a filename only.
-For example: to run Solitaire:
+For example: to run Notepad:
- wine sol (using the search Path as specified in
- wine sol.exe the config file to locate the file)
+ wine notepad (using the search Path as specified in
+ wine notepad.exe the config file to locate the file)
- wine c:\\windows\\sol.exe (using DOS filename syntax)
+ wine c:\\windows\\notepad.exe (using DOS filename syntax)
- wine /usr/windows/sol.exe (using Unix filename syntax)
+ wine ~/.wine/drive_c/windows/notepad.exe (using Unix filename syntax)
- wine sol.exe /parameter1 -parameter2 parameter3
+ wine notepad.exe /parameter1 -parameter2 parameter3
(calling program with parameters)
-Note: the path of the file will also be added to the path when
- a full name is supplied on the commandline.
-
-Wine is not yet complete, so several programs may crash. Provided you set up
-winedbg correctly according to documentation/debugger.sgml, you will be dropped
-into a debugger so that you can investigate and fix the problem.
-For more information on how to do this, please read the file
-documentation/debugging.sgml.
-
-You should backup all your important files that you give Wine access
-to, or use a special Wine copy of them, as there have been some cases
-of users reporting file corruption. Do NOT run Explorer, for instance,
-if you don't have a proper backup, as it renames/cripples several
-directories sometimes. Not even other MS apps such as e.g. Messenger are safe,
-as they launch Explorer somehow. This particular corruption (!$!$!$!$.pfr)
-can at least partially be fixed by using
-http://home.nexgo.de/andi.mohr/download/decorrupt_explorer
+Wine is not yet complete, so several programs may crash. In that crash
+you will be dropped into the debugger so that you can investigate and
+fix the problem. For more information on how to do this, please check
+the debugging section of the Wine Developer's Guide.
-7. DOCUMENTATION
-Some documentation (various Wine Guides etc.) can be found in the
-documentation/ directory (apart from also being available on WineHQ).
-
-If you want to process the SGML files in there, then you can run "make doc"
-in the documentation/ directory.
-Doing so requires the sgml tools package (for db2html, db2ps, db2pdf) named:
-Debian: docbook-utils
-Mandrake: sgml-tools-A.B.C-DDmdk
-SuSE: docbktls-A.BB.C-DD
-
-8. GETTING MORE INFORMATION
+7. GETTING MORE INFORMATION
WWW: A great deal of information about Wine is available from WineHQ at
http://www.winehq.org/ : various Wine Guides, application database,
Please search the bugzilla database to check whether your
problem is already found before posting a bug report. You can
also post bug reports to comp.emulators.ms-windows.wine.
- Please read the file documentation/bugs.sgml to see what
- information is required.
IRC: Online help is available at channel #WineHQ on irc.freenode.net.
-CVS: The current Wine development tree is available through CVS.
- Go to http://www.winehq.org/cvs for more information.
+GIT: The current Wine development tree is available through GIT.
+ Go to http://www.winehq.org/site/git for more information.
Mailing lists:
- There are several mailing lists for Wine developers; see
- http://www.winehq.org/forums for more information.
+ There are several mailing lists for Wine users and developers;
+ see http://www.winehq.org/forums for more information.
+
+Wiki: The Wine Wiki is located at http://wiki.winehq.org
If you add something, or fix a bug, please send a patch (in 'diff -u'
format) to wine-patches@winehq.org list for inclusion in the next