1. INTRODUCTION
Wine is a program which allows running Microsoft Windows programs
-(including DOS, Windows 3.x and Win32 executables) on Unix. It
-consists of a program loader which loads and executes a Microsoft
-Windows binary, and a library that implements Windows API calls using
-their Unix or X11 equivalents. The library may also be used for
-porting Win32 code into native Unix executables.
+(including DOS, Windows 3.x, Win32, and Win64 executables) on Unix.
+It consists of a program loader which loads and executes a Microsoft
+Windows binary, and a library (called Winelib) that implements Windows
+API calls using their Unix or X11 equivalents. The library may also
+be used for porting Windows code into native Unix executables.
+
+Wine is free software, released under the GNU LGPL; see the file
+LICENSE for the details.
-Wine is free software, and its license (contained in the file LICENSE)
-is BSD style. Basically, you can do anything with it except claim
-that you wrote it.
2. QUICK START
-For the impatient, use the Wine Installer to build and install wine.
-From the top-level Wine directory (which contains this file), run:
+Whenever you compile from source, it is recommended to use the Wine
+Installer to build and install Wine. From the top-level directory
+of the Wine source (which contains this file), run:
./tools/wineinstall
-Run programs as "wine [options] program". For more information and
-problem resolution, read the rest of this file, the Wine manpage,
-and the files in the documentation directory in the Wine source.
+Run programs as "wine program". For more information and problem
+resolution, read the rest of this file, the Wine man page, and
+especially the wealth of information found at http://www.winehq.org.
+
3. REQUIREMENTS
To compile and run Wine, you must have one of the following:
- Linux version 2.0.36 or above
- FreeBSD-current or FreeBSD 3.0 or later
- Solaris x86 2.5 or later
-
-Although Linux version 2.0.x will mostly work, certain features
-(specifically LDT sharing) required for properly supporting Win32
-threads were not implemented until kernel version 2.2. If you get
-consistent thread-related crashes, you may want to upgrade to 2.2.
-
-Similarly if you are on FreeBSD you may want to apply an LDT sharing
-patch too (unfortunately this one still isn't in the tree, neither
--current nor -stable), and there also is a small sigtrap fix thats
-needed for wine's debugger. (Actually now that its using ptrace() by
-default it may no longer make a difference but it still doesn't hurt...)
-And if you're running a system from the -stable branch older than
-Nov 15 1999, like a 3.3-RELEASE, then you also need to apply a signal
-handling change that was MFC'd at that date. More information including
-patches for the -stable branch is in the ports tree:
-ftp://ftp.freebsd.org/pub/FreeBSD/FreeBSD-current/ports/emulators/wine/files/
-(the signal handling patch, patch-3.3-sys-fsgs, and the latest README
-haven't yet been committed as i write this, if they still aren't there
-when you look, go here:
-http://www.jelal.kn-bremen.de/freebsd/ports/emulators/wine/files/ )
-
-You also need to have libXpm installed on your system. The sources for
-it are available at ftp.x.org and all its mirror sites in the directory
-/contrib/libraries. If you are using RedHat, libXpm is distributed as the
-xpm and xpm-devel packages. Debian distributes libXpm as xpm4.7, xpm4g,
-and xpm4g-dev 3.4j. SuSE calls these packages xpm and xpm-devel.
-
-On x86 Systems gcc >= 2.7.2 is required. You also need flex version 2.5
-or later and yacc. Bison will work as a replacement for yacc. If you are
-using RedHat, install the flex and bison packages.
+ Linux version 2.0.36 or above
+ FreeBSD 6.3 or later
+ Solaris x86 9 or later
+ NetBSD-current
+ Mac OS X 10.4 or later
-4. COMPILATION
+As Wine requires kernel-level thread support to run, only the operating
+systems mentioned above are supported. Other operating systems which
+support kernel threads may be supported in the future.
-To build Wine, run the following commands:
+Linux info:
+ While Linux 2.2.x should still work and Linux 2.0.x may still work
+ (older 2.0.x versions had thread-related crashes),
+ it's best to have a current kernel such as 2.4.x or 2.6.x.
-./configure
-make depend
-make
+FreeBSD info:
+ Wine will generally not work properly on versions before FreeBSD
+ 6.3 or 7.0, and FreeBSD 6.3 has additional patches available. See
+ http://wiki.freebsd.org/Wine for more information.
-This will build the library "libwine.a" and the program "wine".
-The program "wine" will load and run Windows executables.
-The library "libwine.a" can be used to compile and link Windows source
-code under Unix.
+Solaris info:
+ You will most likely need to build Wine with the GNU toolchain
+ (gcc, gas, etc.). Warning : installing gas does *not* ensure that it
+ will be used by gcc. Recompiling gcc after installing gas or
+ symlinking cc, as and ld to the gnu tools is said to be necessary.
-If you do not intend to compile Windows source code, use
-"./configure --disable-lib" to skip building the library and reduce disk
-space requirements. If you have an ELF compiler (which you probably do),
-you can use "./configure --enable-dll" to build a shared library instead.
-To see other configuration options, do ./configure --help.
+NetBSD info:
+ Make sure you have the USER_LDT, SYSVSHM, SYSVSEM, and SYSVMSG options
+ turned on in your kernel.
-To upgrade to a new release by using a patch file, first cd to the
-top-level directory of the release (the one containing this README
-file). Then do a "make clean", and patch the release with:
+Mac OS X info:
+ You need Xcode 2.4 or later to build properly on x86.
- gunzip -c patch-file | patch -p1
-where "patch-file" is the name of the patch file (something like
-Wine-yymmdd.diff.gz). You can then re-run "./configure", and then
-run "make depend && make".
+Supported file systems:
+ Wine should run on most file systems. A few compatibility problems
+ have also been reported using files accessed through Samba. Also,
+ NTFS does not provide all the file system features needed by some
+ applications. Using a native Linux file system such as ext3 is
+ recommended.
+Basic requirements:
+ You need to have the X11 development include files installed
+ (called xlib6g-dev in Debian and XFree86-devel in Red Hat).
+
+ Of course you also need "make" (most likely GNU make).
+
+ You also need flex version 2.5.33 or later and bison.
+
+Optional support libraries:
+ Configure will display notices when optional libraries are not found
+ on your system. See http://wiki.winehq.org/Recommended_Packages for
+ hints about the packages you should install.
+
+ On 64-bit platforms, if compiling Wine as 32-bit (default), you have
+ to make sure to install the 32-bit versions of these libraries; see
+ http://wiki.winehq.org/WineOn64bit for details. If you want a true
+ 64-bit Wine (or a mixed 32-bit and 64-bit Wine setup), see
+ http://wiki.winehq.org/Wine64 for details.
+
+4. COMPILATION
+
+In case you chose to not use wineinstall, run the following commands
+to build Wine:
+
+./configure
+make
+
+This will build the program "wine" and numerous support libraries/binaries.
+The program "wine" will load and run Windows executables.
+The library "libwine" ("Winelib") can be used to compile and link
+Windows source code under Unix.
+
+To see compile configuration options, do ./configure --help.
5. SETUP
Once Wine has been built correctly, you can do "make install"; this
-will install the wine executable, the Wine man page, and a few other
-needed files.
-
-Wine requires a configuration file named wine.conf. Its default location is
-/usr/local/etc, but you can supply a different name when configuring wine by
-using the --prefix or --sysconfdir options to ./configure. You can also override
-the global configuration file with a .winerc file in your home directory.
+will install the wine executable and libraries, the Wine man page, and
+other needed files.
-The format of this file is explained in the man page. The file
-wine.ini contains an example configuration file which has to be adapted
-and copied to one of the two locations mentioned above.
+Don't forget to uninstall any conflicting previous Wine installation
+first. Try either "dpkg -r wine" or "rpm -e wine" or "make uninstall"
+before installing.
-See http://www.winehq.com/config.html for further configuration hints.
+Once installed, you can run the "winecfg" configuration tool. See the
+Support area at http://www.winehq.org/ for configuration hints.
6. RUNNING PROGRAMS
When invoking Wine, you may specify the entire path to the executable,
or a filename only.
-For example: to run Solitaire:
+For example: to run Notepad:
- wine sol (using the searchpath to locate the file)
- wine sol.exe
+ wine notepad (using the search Path as specified in
+ wine notepad.exe the registry to locate the file)
- wine c:\\windows\\sol.exe (using a DOS filename)
+ wine c:\\windows\\notepad.exe (using DOS filename syntax)
- wine /usr/windows/sol.exe (using a Unix filename)
+ wine ~/.wine/drive_c/windows/notepad.exe (using Unix filename syntax)
-Note: the path of the file will also be added to the path when
- a full name is supplied on the commandline.
+ wine notepad.exe readme.txt (calling program with parameters)
-Wine is not yet complete, so some programs may crash. You will be dropped
-into a debugger so that you can investigate and fix the problem. For more
-information on how to do this, please read the file documentation/debugging.
-If you post a bug report, please read the file documentation/bugreports to
-see what information is required.
+Wine is not perfect, so some programs may crash. If that happens you
+will get a crash log that you should attach to your report when filing
+a bug.
7. GETTING MORE INFORMATION
-FAQ: The Wine FAQ is located at http://www.winehq.com/faq.html.
-
WWW: A great deal of information about Wine is available from WineHQ at
- http://www.winehq.com/. Untested patches against the current release
- are available on the wine-patches mailing list; see
- http://www.winehq.com/dev.html#ml for more information.
+ http://www.winehq.org/ : various Wine Guides, application database,
+ bug tracking. This is probably the best starting point.
+
+FAQ: The Wine FAQ is located at http://www.winehq.org/FAQ
+
+Wiki: The Wine Wiki is located at http://wiki.winehq.org
-HOWTO: A pre-release version of the Wine HOWTO is available at
- http://www.westfalen.de/witch/wine-HOWTO.txt .
+Mailing lists:
+ There are several mailing lists for Wine users and developers;
+ see http://www.winehq.org/forums for more information.
-Usenet: Please browse old messages on http://www.dejanews.com/ to check whether
- your problem is already fixed before posting a bug report to the
- newsgroup.
+Bugs: Report bugs to Wine Bugzilla at http://bugs.winehq.org
+ Please search the bugzilla database to check whether your
+ problem is already known or fixed before posting a bug report.
- The best place to get help or to report bugs is the Usenet newsgroup
- comp.emulators.ms-windows.wine. Please read the file
- documentation/bugreports to see what information should be included
- in a bug report.
+IRC: Online help is available at channel #WineHQ on irc.freenode.net.
-CVS: The current Wine development tree is available through CVS.
- Go to http://www.winehq.com/dev.html for more information.
+Git: The current Wine development tree is available through Git.
+ Go to http://www.winehq.org/git for more information.
-If you add something, or fix a bug, please send a patch ('diff -u'
-format preferred) to julliard@lrc.epfl.ch for inclusion in the next
-release.
+If you add something, or fix a bug, please send a patch (preferably
+using git-format-patch) to the wine-patches@winehq.org list for
+inclusion in the next release.
--
Alexandre Julliard
-julliard@lrc.epfl.ch
+julliard@winehq.org