git.oblomov.eu Git - git/blob - git-bisect.sh

   1 #!/bin/sh
   2
   3 USAGE='[help|start|bad|good|new|old|terms|skip|next|reset|visualize|view|replay|log|run]'
   4 LONG_USAGE='git bisect help
   5         print this long help message.
   6 git bisect start [--term-{old,good}=<term> --term-{new,bad}=<term>]
   7                  [--no-checkout] [<bad> [<good>...]] [--] [<pathspec>...]
   8         reset bisect state and start bisection.
   9 git bisect (bad|new) [<rev>]
  10         mark <rev> a known-bad revision/
  11                 a revision after change in a given property.
  12 git bisect (good|old) [<rev>...]
  13         mark <rev>... known-good revisions/
  14                 revisions before change in a given property.
  15 git bisect terms [--term-good | --term-bad]
  16         show the terms used for old and new commits (default: bad, good)
  17 git bisect skip [(<rev>|<range>)...]
  18         mark <rev>... untestable revisions.
  19 git bisect next
  20         find next bisection to test and check it out.
  21 git bisect reset [<commit>]
  22         finish bisection search and go back to commit.
  23 git bisect (visualize|view)
  24         show bisect status in gitk.
  25 git bisect replay <logfile>
  26         replay bisection log.
  27 git bisect log
  28         show bisect log.
  29 git bisect run <cmd>...
  30         use <cmd>... to automatically bisect.
  31
  32 Please use "git help bisect" to get the full man page.'
  33
  34 OPTIONS_SPEC=
  35 . git-sh-setup
  36
  37 _x40='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
  38 _x40="$_x40$_x40$_x40$_x40$_x40$_x40$_x40$_x40"
  39 TERM_BAD=bad
  40 TERM_GOOD=good
  41
  42 bisect_head()
  43 {
  44         if test -f "$GIT_DIR/BISECT_HEAD"
  45         then
  46                 echo BISECT_HEAD
  47         else
  48                 echo HEAD
  49         fi
  50 }
  51
  52 bisect_autostart() {
  53         test -s "$GIT_DIR/BISECT_START" || {
  54                 gettextln "You need to start by \"git bisect start\"" >&2
  55                 if test -t 0
  56                 then
  57                         # TRANSLATORS: Make sure to include [Y] and [n] in your
  58                         # translation. The program will only accept English input
  59                         # at this point.
  60                         gettext "Do you want me to do it for you [Y/n]? " >&2
  61                         read yesno
  62                         case "$yesno" in
  63                         [Nn]*)
  64                                 exit ;;
  65                         esac
  66                         bisect_start
  67                 else
  68                         exit 1
  69                 fi
  70         }
  71 }
  72
  73 bisect_start() {
  74         #
  75         # Check for one bad and then some good revisions.
  76         #
  77         has_double_dash=0
  78         for arg; do
  79                 case "$arg" in --) has_double_dash=1; break ;; esac
  80         done
  81         orig_args=$(git rev-parse --sq-quote "$@")
  82         bad_seen=0
  83         eval=''
  84         must_write_terms=0
  85         revs=''
  86         if test "z$(git rev-parse --is-bare-repository)" != zfalse
  87         then
  88                 mode=--no-checkout
  89         else
  90                 mode=''
  91         fi
  92         while [ $# -gt 0 ]; do
  93                 arg="$1"
  94                 case "$arg" in
  95                 --)
  96                         shift
  97                         break
  98                 ;;
  99                 --no-checkout)
 100                         mode=--no-checkout
 101                         shift ;;
 102                 --term-good|--term-old)
 103                         shift
 104                         must_write_terms=1
 105                         TERM_GOOD=$1
 106                         shift ;;
 107                 --term-good=*|--term-old=*)
 108                         must_write_terms=1
 109                         TERM_GOOD=${1#*=}
 110                         shift ;;
 111                 --term-bad|--term-new)
 112                         shift
 113                         must_write_terms=1
 114                         TERM_BAD=$1
 115                         shift ;;
 116                 --term-bad=*|--term-new=*)
 117                         must_write_terms=1
 118                         TERM_BAD=${1#*=}
 119                         shift ;;
 120                 --*)
 121                         die "$(eval_gettext "unrecognised option: '\$arg'")" ;;
 122                 *)
 123                         rev=$(git rev-parse -q --verify "$arg^{commit}") || {
 124                                 test $has_double_dash -eq 1 &&
 125                                 die "$(eval_gettext "'\$arg' does not appear to be a valid revision")"
 126                                 break
 127                         }
 128                         revs="$revs $rev"
 129                         shift
 130                         ;;
 131                 esac
 132         done
 133
 134         for rev in $revs
 135         do
 136                 # The user ran "git bisect start <sha1>
 137                 # <sha1>", hence did not explicitly specify
 138                 # the terms, but we are already starting to
 139                 # set references named with the default terms,
 140                 # and won't be able to change afterwards.
 141                 must_write_terms=1
 142
 143                 case $bad_seen in
 144                 0) state=$TERM_BAD ; bad_seen=1 ;;
 145                 *) state=$TERM_GOOD ;;
 146                 esac
 147                 eval="$eval bisect_write '$state' '$rev' 'nolog' &&"
 148         done
 149         #
 150         # Verify HEAD.
 151         #
 152         head=$(GIT_DIR="$GIT_DIR" git symbolic-ref -q HEAD) ||
 153         head=$(GIT_DIR="$GIT_DIR" git rev-parse --verify HEAD) ||
 154         die "$(gettext "Bad HEAD - I need a HEAD")"
 155
 156         #
 157         # Check if we are bisecting.
 158         #
 159         start_head=''
 160         if test -s "$GIT_DIR/BISECT_START"
 161         then
 162                 # Reset to the rev from where we started.
 163                 start_head=$(cat "$GIT_DIR/BISECT_START")
 164                 if test "z$mode" != "z--no-checkout"
 165                 then
 166                         git checkout "$start_head" -- ||
 167                         die "$(eval_gettext "Checking out '\$start_head' failed. Try 'git bisect reset <valid-branch>'.")"
 168                 fi
 169         else
 170                 # Get rev from where we start.
 171                 case "$head" in
 172                 refs/heads/*|$_x40)
 173                         # This error message should only be triggered by
 174                         # cogito usage, and cogito users should understand
 175                         # it relates to cg-seek.
 176                         [ -s "$GIT_DIR/head-name" ] &&
 177                                 die "$(gettext "won't bisect on cg-seek'ed tree")"
 178                         start_head="${head#refs/heads/}"
 179                         ;;
 180                 *)
 181                         die "$(gettext "Bad HEAD - strange symbolic ref")"
 182                         ;;
 183                 esac
 184         fi
 185
 186         #
 187         # Get rid of any old bisect state.
 188         #
 189         git bisect--helper --bisect-clean-state || exit
 190
 191         #
 192         # Change state.
 193         # In case of mistaken revs or checkout error, or signals received,
 194         # "bisect_auto_next" below may exit or misbehave.
 195         # We have to trap this to be able to clean up using
 196         # "bisect_clean_state".
 197         #
 198         trap 'git bisect--helper --bisect-clean-state' 0
 199         trap 'exit 255' 1 2 3 15
 200
 201         #
 202         # Write new start state.
 203         #
 204         echo "$start_head" >"$GIT_DIR/BISECT_START" && {
 205                 test "z$mode" != "z--no-checkout" ||
 206                 git update-ref --no-deref BISECT_HEAD "$start_head"
 207         } &&
 208         git rev-parse --sq-quote "$@" >"$GIT_DIR/BISECT_NAMES" &&
 209         eval "$eval true" &&
 210         if test $must_write_terms -eq 1
 211         then
 212                 git bisect--helper --write-terms "$TERM_BAD" "$TERM_GOOD" || exit
 213         fi &&
 214         echo "git bisect start$orig_args" >>"$GIT_DIR/BISECT_LOG" || exit
 215         #
 216         # Check if we can proceed to the next bisect state.
 217         #
 218         bisect_auto_next
 219
 220         trap '-' 0
 221 }
 222
 223 bisect_write() {
 224         state="$1"
 225         rev="$2"
 226         nolog="$3"
 227         case "$state" in
 228                 "$TERM_BAD")
 229                         tag="$state" ;;
 230                 "$TERM_GOOD"|skip)
 231                         tag="$state"-"$rev" ;;
 232                 *)
 233                         die "$(eval_gettext "Bad bisect_write argument: \$state")" ;;
 234         esac
 235         git update-ref "refs/bisect/$tag" "$rev" || exit
 236         echo "# $state: $(git show-branch $rev)" >>"$GIT_DIR/BISECT_LOG"
 237         test -n "$nolog" || echo "git bisect $state $rev" >>"$GIT_DIR/BISECT_LOG"
 238 }
 239
 240 bisect_skip() {
 241         all=''
 242         for arg in "$@"
 243         do
 244                 case "$arg" in
 245                 *..*)
 246                         revs=$(git rev-list "$arg") || die "$(eval_gettext "Bad rev input: \$arg")" ;;
 247                 *)
 248                         revs=$(git rev-parse --sq-quote "$arg") ;;
 249                 esac
 250                 all="$all $revs"
 251         done
 252         eval bisect_state 'skip' $all
 253 }
 254
 255 bisect_state() {
 256         bisect_autostart
 257         state=$1
 258         check_and_set_terms $state
 259         case "$#,$state" in
 260         0,*)
 261                 die "Please call 'bisect_state' with at least one argument." ;;
 262         1,"$TERM_BAD"|1,"$TERM_GOOD"|1,skip)
 263                 bisected_head=$(bisect_head)
 264                 rev=$(git rev-parse --verify "$bisected_head") ||
 265                         die "$(eval_gettext "Bad rev input: \$bisected_head")"
 266                 bisect_write "$state" "$rev"
 267                 git bisect--helper --check-expected-revs "$rev" ;;
 268         2,"$TERM_BAD"|*,"$TERM_GOOD"|*,skip)
 269                 shift
 270                 hash_list=''
 271                 for rev in "$@"
 272                 do
 273                         sha=$(git rev-parse --verify "$rev^{commit}") ||
 274                                 die "$(eval_gettext "Bad rev input: \$rev")"
 275                         hash_list="$hash_list $sha"
 276                 done
 277                 for rev in $hash_list
 278                 do
 279                         bisect_write "$state" "$rev"
 280                 done
 281                 git bisect--helper --check-expected-revs $hash_list ;;
 282         *,"$TERM_BAD")
 283                 die "$(eval_gettext "'git bisect \$TERM_BAD' can take only one argument.")" ;;
 284         *)
 285                 usage ;;
 286         esac
 287         bisect_auto_next
 288 }
 289
 290 bisect_next_check() {
 291         missing_good= missing_bad=
 292         git show-ref -q --verify refs/bisect/$TERM_BAD || missing_bad=t
 293         test -n "$(git for-each-ref "refs/bisect/$TERM_GOOD-*")" || missing_good=t
 294
 295         case "$missing_good,$missing_bad,$1" in
 296         ,,*)
 297                 : have both $TERM_GOOD and $TERM_BAD - ok
 298                 ;;
 299         *,)
 300                 # do not have both but not asked to fail - just report.
 301                 false
 302                 ;;
 303         t,,"$TERM_GOOD")
 304                 # have bad (or new) but not good (or old).  we could bisect although
 305                 # this is less optimum.
 306                 eval_gettextln "Warning: bisecting only with a \$TERM_BAD commit." >&2
 307                 if test -t 0
 308                 then
 309                         # TRANSLATORS: Make sure to include [Y] and [n] in your
 310                         # translation. The program will only accept English input
 311                         # at this point.
 312                         gettext "Are you sure [Y/n]? " >&2
 313                         read yesno
 314                         case "$yesno" in [Nn]*) exit 1 ;; esac
 315                 fi
 316                 : bisect without $TERM_GOOD...
 317                 ;;
 318         *)
 319                 bad_syn=$(bisect_voc bad)
 320                 good_syn=$(bisect_voc good)
 321                 if test -s "$GIT_DIR/BISECT_START"
 322                 then
 323
 324                         eval_gettextln "You need to give me at least one \$bad_syn and one \$good_syn revision.
 325 (You can use \"git bisect \$bad_syn\" and \"git bisect \$good_syn\" for that.)" >&2
 326                 else
 327                         eval_gettextln "You need to start by \"git bisect start\".
 328 You then need to give me at least one \$good_syn and one \$bad_syn revision.
 329 (You can use \"git bisect \$bad_syn\" and \"git bisect \$good_syn\" for that.)" >&2
 330                 fi
 331                 exit 1 ;;
 332         esac
 333 }
 334
 335 bisect_auto_next() {
 336         bisect_next_check && bisect_next || :
 337 }
 338
 339 bisect_next() {
 340         case "$#" in 0) ;; *) usage ;; esac
 341         bisect_autostart
 342         bisect_next_check $TERM_GOOD
 343
 344         # Perform all bisection computation, display and checkout
 345         git bisect--helper --next-all $(test -f "$GIT_DIR/BISECT_HEAD" && echo --no-checkout)
 346         res=$?
 347
 348         # Check if we should exit because bisection is finished
 349         if test $res -eq 10
 350         then
 351                 bad_rev=$(git show-ref --hash --verify refs/bisect/$TERM_BAD)
 352                 bad_commit=$(git show-branch $bad_rev)
 353                 echo "# first $TERM_BAD commit: $bad_commit" >>"$GIT_DIR/BISECT_LOG"
 354                 exit 0
 355         elif test $res -eq 2
 356         then
 357                 echo "# only skipped commits left to test" >>"$GIT_DIR/BISECT_LOG"
 358                 good_revs=$(git for-each-ref --format="%(objectname)" "refs/bisect/$TERM_GOOD-*")
 359                 for skipped in $(git rev-list refs/bisect/$TERM_BAD --not $good_revs)
 360                 do
 361                         skipped_commit=$(git show-branch $skipped)
 362                         echo "# possible first $TERM_BAD commit: $skipped_commit" >>"$GIT_DIR/BISECT_LOG"
 363                 done
 364                 exit $res
 365         fi
 366
 367         # Check for an error in the bisection process
 368         test $res -ne 0 && exit $res
 369
 370         return 0
 371 }
 372
 373 bisect_visualize() {
 374         bisect_next_check fail
 375
 376         if test $# = 0
 377         then
 378                 if test -n "${DISPLAY+set}${SESSIONNAME+set}${MSYSTEM+set}${SECURITYSESSIONID+set}" &&
 379                         type gitk >/dev/null 2>&1
 380                 then
 381                         set gitk
 382                 else
 383                         set git log
 384                 fi
 385         else
 386                 case "$1" in
 387                 git*|tig) ;;
 388                 -*)     set git log "$@" ;;
 389                 *)      set git "$@" ;;
 390                 esac
 391         fi
 392
 393         eval '"$@"' --bisect -- $(cat "$GIT_DIR/BISECT_NAMES")
 394 }
 395
 396 bisect_reset() {
 397         test -s "$GIT_DIR/BISECT_START" || {
 398                 gettextln "We are not bisecting."
 399                 return
 400         }
 401         case "$#" in
 402         0) branch=$(cat "$GIT_DIR/BISECT_START") ;;
 403         1) git rev-parse --quiet --verify "$1^{commit}" >/dev/null || {
 404                         invalid="$1"
 405                         die "$(eval_gettext "'\$invalid' is not a valid commit")"
 406                 }
 407                 branch="$1" ;;
 408         *)
 409                 usage ;;
 410         esac
 411
 412         if ! test -f "$GIT_DIR/BISECT_HEAD" && ! git checkout "$branch" --
 413         then
 414                 die "$(eval_gettext "Could not check out original HEAD '\$branch'.
 415 Try 'git bisect reset <commit>'.")"
 416         fi
 417         git bisect--helper --bisect-clean-state || exit
 418 }
 419
 420 bisect_replay () {
 421         file="$1"
 422         test "$#" -eq 1 || die "$(gettext "No logfile given")"
 423         test -r "$file" || die "$(eval_gettext "cannot read \$file for replaying")"
 424         bisect_reset
 425         while read git bisect command rev
 426         do
 427                 test "$git $bisect" = "git bisect" || test "$git" = "git-bisect" || continue
 428                 if test "$git" = "git-bisect"
 429                 then
 430                         rev="$command"
 431                         command="$bisect"
 432                 fi
 433                 get_terms
 434                 check_and_set_terms "$command"
 435                 case "$command" in
 436                 start)
 437                         cmd="bisect_start $rev"
 438                         eval "$cmd" ;;
 439                 "$TERM_GOOD"|"$TERM_BAD"|skip)
 440                         bisect_write "$command" "$rev" ;;
 441                 terms)
 442                         bisect_terms $rev ;;
 443                 *)
 444                         die "$(gettext "?? what are you talking about?")" ;;
 445                 esac
 446         done <"$file"
 447         bisect_auto_next
 448 }
 449
 450 bisect_run () {
 451         bisect_next_check fail
 452
 453         test -n "$*" || die "$(gettext "bisect run failed: no command provided.")"
 454
 455         while true
 456         do
 457                 command="$@"
 458                 eval_gettextln "running \$command"
 459                 "$@"
 460                 res=$?
 461
 462                 # Check for really bad run error.
 463                 if [ $res -lt 0 -o $res -ge 128 ]
 464                 then
 465                         eval_gettextln "bisect run failed:
 466 exit code \$res from '\$command' is < 0 or >= 128" >&2
 467                         exit $res
 468                 fi
 469
 470                 # Find current state depending on run success or failure.
 471                 # A special exit code of 125 means cannot test.
 472                 if [ $res -eq 125 ]
 473                 then
 474                         state='skip'
 475                 elif [ $res -gt 0 ]
 476                 then
 477                         state="$TERM_BAD"
 478                 else
 479                         state="$TERM_GOOD"
 480                 fi
 481
 482                 # We have to use a subshell because "bisect_state" can exit.
 483                 ( bisect_state $state >"$GIT_DIR/BISECT_RUN" )
 484                 res=$?
 485
 486                 cat "$GIT_DIR/BISECT_RUN"
 487
 488                 if sane_grep "first $TERM_BAD commit could be any of" "$GIT_DIR/BISECT_RUN" \
 489                         >/dev/null
 490                 then
 491                         gettextln "bisect run cannot continue any more" >&2
 492                         exit $res
 493                 fi
 494
 495                 if [ $res -ne 0 ]
 496                 then
 497                         eval_gettextln "bisect run failed:
 498 'bisect_state \$state' exited with error code \$res" >&2
 499                         exit $res
 500                 fi
 501
 502                 if sane_grep "is the first $TERM_BAD commit" "$GIT_DIR/BISECT_RUN" >/dev/null
 503                 then
 504                         gettextln "bisect run success"
 505                         exit 0;
 506                 fi
 507
 508         done
 509 }
 510
 511 bisect_log () {
 512         test -s "$GIT_DIR/BISECT_LOG" || die "$(gettext "We are not bisecting.")"
 513         cat "$GIT_DIR/BISECT_LOG"
 514 }
 515
 516 get_terms () {
 517         if test -s "$GIT_DIR/BISECT_TERMS"
 518         then
 519                 {
 520                 read TERM_BAD
 521                 read TERM_GOOD
 522                 } <"$GIT_DIR/BISECT_TERMS"
 523         fi
 524 }
 525
 526 check_and_set_terms () {
 527         cmd="$1"
 528         case "$cmd" in
 529         skip|start|terms) ;;
 530         *)
 531                 if test -s "$GIT_DIR/BISECT_TERMS" && test "$cmd" != "$TERM_BAD" && test "$cmd" != "$TERM_GOOD"
 532                 then
 533                         die "$(eval_gettext "Invalid command: you're currently in a \$TERM_BAD/\$TERM_GOOD bisect.")"
 534                 fi
 535                 case "$cmd" in
 536                 bad|good)
 537                         if ! test -s "$GIT_DIR/BISECT_TERMS"
 538                         then
 539                                 TERM_BAD=bad
 540                                 TERM_GOOD=good
 541                                 git bisect--helper --write-terms "$TERM_BAD" "$TERM_GOOD" || exit
 542                         fi
 543                         ;;
 544                 new|old)
 545                         if ! test -s "$GIT_DIR/BISECT_TERMS"
 546                         then
 547                                 TERM_BAD=new
 548                                 TERM_GOOD=old
 549                                 git bisect--helper --write-terms "$TERM_BAD" "$TERM_GOOD" || exit
 550                         fi
 551                         ;;
 552                 esac ;;
 553         esac
 554 }
 555
 556 bisect_voc () {
 557         case "$1" in
 558         bad) echo "bad|new" ;;
 559         good) echo "good|old" ;;
 560         esac
 561 }
 562
 563 bisect_terms () {
 564         get_terms
 565         if ! test -s "$GIT_DIR/BISECT_TERMS"
 566         then
 567                 die "$(gettext "no terms defined")"
 568         fi
 569         case "$#" in
 570         0)
 571                 gettextln "Your current terms are $TERM_GOOD for the old state
 572 and $TERM_BAD for the new state."
 573                 ;;
 574         1)
 575                 arg=$1
 576                 case "$arg" in
 577                         --term-good|--term-old)
 578                                 printf '%s\n' "$TERM_GOOD"
 579                                 ;;
 580                         --term-bad|--term-new)
 581                                 printf '%s\n' "$TERM_BAD"
 582                                 ;;
 583                         *)
 584                                 die "$(eval_gettext "invalid argument \$arg for 'git bisect terms'.
 585 Supported options are: --term-good|--term-old and --term-bad|--term-new.")"
 586                                 ;;
 587                 esac
 588                 ;;
 589         *)
 590                 usage ;;
 591         esac
 592 }
 593
 594 case "$#" in
 595 0)
 596         usage ;;
 597 *)
 598         cmd="$1"
 599         get_terms
 600         shift
 601         case "$cmd" in
 602         help)
 603                 git bisect -h ;;
 604         start)
 605                 bisect_start "$@" ;;
 606         bad|good|new|old|"$TERM_BAD"|"$TERM_GOOD")
 607                 bisect_state "$cmd" "$@" ;;
 608         skip)
 609                 bisect_skip "$@" ;;
 610         next)
 611                 # Not sure we want "next" at the UI level anymore.
 612                 bisect_next "$@" ;;
 613         visualize|view)
 614                 bisect_visualize "$@" ;;
 615         reset)
 616                 bisect_reset "$@" ;;
 617         replay)
 618                 bisect_replay "$@" ;;
 619         log)
 620                 bisect_log ;;
 621         run)
 622                 bisect_run "$@" ;;
 623         terms)
 624                 bisect_terms "$@" ;;
 625         *)
 626                 usage ;;
 627         esac
 628 esac