Merge branch 'ab/grep-preparatory-cleanup' into sb/submodule-blanket-recursive
[git] / t / lib-submodule-update.sh
1 # Create a submodule layout used for all tests below.
2 #
3 # The following use cases are covered:
4 # - New submodule (no_submodule => add_sub1)
5 # - Removed submodule (add_sub1 => remove_sub1)
6 # - Updated submodule (add_sub1 => modify_sub1)
7 # - Updated submodule recursively (add_nested_sub => modify_sub1_recursively)
8 # - Submodule updated to invalid commit (add_sub1 => invalid_sub1)
9 # - Submodule updated from invalid commit (invalid_sub1 => valid_sub1)
10 # - Submodule replaced by tracked files in directory (add_sub1 =>
11 #   replace_sub1_with_directory)
12 # - Directory containing tracked files replaced by submodule
13 #   (replace_sub1_with_directory => replace_directory_with_sub1)
14 # - Submodule replaced by tracked file with the same name (add_sub1 =>
15 #   replace_sub1_with_file)
16 # - Tracked file replaced by submodule (replace_sub1_with_file =>
17 #   replace_file_with_sub1)
18 #
19 #                     ----O
20 #                    /    ^
21 #                   /     remove_sub1
22 #                  /
23 #       add_sub1  /-------O---------O--------O  modify_sub1_recursively
24 #             |  /        ^         add_nested_sub
25 #             | /         modify_sub1
26 #             v/
27 #      O------O-----------O---------O
28 #      ^       \          ^         replace_directory_with_sub1
29 #      |        \         replace_sub1_with_directory
30 # no_submodule   \
31 #                 --------O---------O
32 #                  \      ^         replace_file_with_sub1
33 #                   \     replace_sub1_with_file
34 #                    \
35 #                     ----O---------O
36 #                         ^         valid_sub1
37 #                         invalid_sub1
38 #
39
40 create_lib_submodule_repo () {
41         git init submodule_update_sub1 &&
42         (
43                 cd submodule_update_sub1 &&
44                 echo "expect" >>.gitignore &&
45                 echo "actual" >>.gitignore &&
46                 echo "x" >file1 &&
47                 echo "y" >file2 &&
48                 git add .gitignore file1 file2 &&
49                 git commit -m "Base inside first submodule" &&
50                 git branch "no_submodule"
51         ) &&
52         git init submodule_update_sub2 &&
53         (
54                 cd submodule_update_sub2
55                 echo "expect" >>.gitignore &&
56                 echo "actual" >>.gitignore &&
57                 echo "x" >file1 &&
58                 echo "y" >file2 &&
59                 git add .gitignore file1 file2 &&
60                 git commit -m "nested submodule base" &&
61                 git branch "no_submodule"
62         ) &&
63         git init submodule_update_repo &&
64         (
65                 cd submodule_update_repo &&
66                 echo "expect" >>.gitignore &&
67                 echo "actual" >>.gitignore &&
68                 echo "x" >file1 &&
69                 echo "y" >file2 &&
70                 git add .gitignore file1 file2 &&
71                 git commit -m "Base" &&
72                 git branch "no_submodule" &&
73
74                 git checkout -b "add_sub1" &&
75                 git submodule add ../submodule_update_sub1 sub1 &&
76                 git submodule add ../submodule_update_sub1 uninitialized_sub &&
77                 git config -f .gitmodules submodule.sub1.ignore all &&
78                 git config submodule.sub1.ignore all &&
79                 git add .gitmodules &&
80                 git commit -m "Add sub1" &&
81
82                 git checkout -b remove_sub1 add_sub1 &&
83                 git revert HEAD &&
84
85                 git checkout -b modify_sub1 add_sub1 &&
86                 git submodule update &&
87                 (
88                         cd sub1 &&
89                         git fetch &&
90                         git checkout -b "modifications" &&
91                         echo "z" >file2 &&
92                         echo "x" >file3 &&
93                         git add file2 file3 &&
94                         git commit -m "modified file2 and added file3" &&
95                         git push origin modifications
96                 ) &&
97                 git add sub1 &&
98                 git commit -m "Modify sub1" &&
99
100                 git checkout -b add_nested_sub modify_sub1 &&
101                 git -C sub1 checkout -b "add_nested_sub" &&
102                 git -C sub1 submodule add --branch no_submodule ../submodule_update_sub2 sub2 &&
103                 git -C sub1 commit -a -m "add a nested submodule" &&
104                 git add sub1 &&
105                 git commit -a -m "update submodule, that updates a nested submodule" &&
106                 git checkout -b modify_sub1_recursively &&
107                 git -C sub1 checkout -b modify_sub1_recursively &&
108                 git -C sub1/sub2 checkout -b modify_sub1_recursively &&
109                 echo change >sub1/sub2/file3 &&
110                 git -C sub1/sub2 add file3 &&
111                 git -C sub1/sub2 commit -m "make a change in nested sub" &&
112                 git -C sub1 add sub2 &&
113                 git -C sub1 commit -m "update nested sub" &&
114                 git add sub1 &&
115                 git commit -m "update sub1, that updates nested sub" &&
116                 git -C sub1 push origin modify_sub1_recursively &&
117                 git -C sub1/sub2 push origin modify_sub1_recursively &&
118                 git -C sub1 submodule deinit -f --all &&
119
120                 git checkout -b replace_sub1_with_directory add_sub1 &&
121                 git submodule update &&
122                 git -C sub1 checkout modifications &&
123                 git rm --cached sub1 &&
124                 rm sub1/.git* &&
125                 git config -f .gitmodules --remove-section "submodule.sub1" &&
126                 git add .gitmodules sub1/* &&
127                 git commit -m "Replace sub1 with directory" &&
128
129                 git checkout -b replace_directory_with_sub1 &&
130                 git revert HEAD &&
131
132                 git checkout -b replace_sub1_with_file add_sub1 &&
133                 git rm sub1 &&
134                 echo "content" >sub1 &&
135                 git add sub1 &&
136                 git commit -m "Replace sub1 with file" &&
137
138                 git checkout -b replace_file_with_sub1 &&
139                 git revert HEAD &&
140
141                 git checkout -b invalid_sub1 add_sub1 &&
142                 git update-index --cacheinfo 160000 0123456789012345678901234567890123456789 sub1 &&
143                 git commit -m "Invalid sub1 commit" &&
144                 git checkout -b valid_sub1 &&
145                 git revert HEAD &&
146
147                 git checkout master
148         )
149 }
150
151 # Helper function to replace gitfile with .git directory
152 replace_gitfile_with_git_dir () {
153         (
154                 cd "$1" &&
155                 git_dir="$(git rev-parse --git-dir)" &&
156                 rm -f .git &&
157                 cp -R "$git_dir" .git &&
158                 GIT_WORK_TREE=. git config --unset core.worktree
159         )
160 }
161
162 # Test that the .git directory in the submodule is unchanged (except for the
163 # core.worktree setting, which appears only in $GIT_DIR/modules/$1/config).
164 # Call this function before test_submodule_content as the latter might
165 # write the index file leading to false positive index differences.
166 #
167 # Note that this only supports submodules at the root level of the
168 # superproject, with the default name, i.e. same as its path.
169 test_git_directory_is_unchanged () {
170         (
171                 cd ".git/modules/$1" &&
172                 # does core.worktree point at the right place?
173                 test "$(git config core.worktree)" = "../../../$1" &&
174                 # remove it temporarily before comparing, as
175                 # "$1/.git/config" lacks it...
176                 git config --unset core.worktree
177         ) &&
178         diff -r ".git/modules/$1" "$1/.git" &&
179         (
180                 # ... and then restore.
181                 cd ".git/modules/$1" &&
182                 git config core.worktree "../../../$1"
183         )
184 }
185
186 test_git_directory_exists() {
187         test -e ".git/modules/$1" &&
188         if test -f sub1/.git
189         then
190                 # does core.worktree point at the right place?
191                 test "$(git -C .git/modules/$1 config core.worktree)" = "../../../$1"
192         fi
193 }
194
195 # Helper function to be executed at the start of every test below, it sets up
196 # the submodule repo if it doesn't exist and configures the most problematic
197 # settings for diff.ignoreSubmodules.
198 prolog () {
199         (test -d submodule_update_repo || create_lib_submodule_repo) &&
200         test_config_global diff.ignoreSubmodules all &&
201         test_config diff.ignoreSubmodules all
202 }
203
204 # Helper function to bring work tree back into the state given by the
205 # commit. This includes trying to populate sub1 accordingly if it exists and
206 # should be updated to an existing commit.
207 reset_work_tree_to () {
208         rm -rf submodule_update &&
209         git clone submodule_update_repo submodule_update &&
210         (
211                 cd submodule_update &&
212                 rm -rf sub1 &&
213                 git checkout -f "$1" &&
214                 git status -u -s >actual &&
215                 test_must_be_empty actual &&
216                 hash=$(git rev-parse --revs-only HEAD:sub1) &&
217                 if test -n "$hash" &&
218                    test $(cd "../submodule_update_sub1" && git rev-parse --verify "$hash^{commit}")
219                 then
220                         git submodule update --init --recursive "sub1"
221                 fi
222         )
223 }
224
225 reset_work_tree_to_interested () {
226         reset_work_tree_to $1 &&
227         # make the submodule git dirs available
228         if ! test -d submodule_update/.git/modules/sub1
229         then
230                 mkdir -p submodule_update/.git/modules &&
231                 cp -r submodule_update_repo/.git/modules/sub1 submodule_update/.git/modules/sub1
232                 GIT_WORK_TREE=. git -C submodule_update/.git/modules/sub1 config --unset core.worktree
233         fi &&
234         if ! test -d submodule_update/.git/modules/sub1/modules/sub2
235         then
236                 mkdir -p submodule_update/.git/modules/sub1/modules &&
237                 cp -r submodule_update_repo/.git/modules/sub1/modules/sub2 submodule_update/.git/modules/sub1/modules/sub2
238                 GIT_WORK_TREE=. git -C submodule_update/.git/modules/sub1/modules/sub2 config --unset core.worktree
239         fi &&
240         # indicate we are interested in the submodule:
241         git -C submodule_update config submodule.sub1.url "bogus" &&
242         # sub1 might not be checked out, so use the git dir
243         git -C submodule_update/.git/modules/sub1 config submodule.sub2.url "bogus"
244 }
245
246 # Test that the superproject contains the content according to commit "$1"
247 # (the work tree must match the index for everything but submodules but the
248 # index must exactly match the given commit including any submodule SHA-1s).
249 test_superproject_content () {
250         git diff-index --cached "$1" >actual &&
251         test_must_be_empty actual &&
252         git diff-files --ignore-submodules >actual &&
253         test_must_be_empty actual
254 }
255
256 # Test that the given submodule at path "$1" contains the content according
257 # to the submodule commit recorded in the superproject's commit "$2"
258 test_submodule_content () {
259         if test x"$1" = "x-C"
260         then
261                 cd "$2"
262                 shift; shift;
263         fi
264         if test $# != 2
265         then
266                 echo "test_submodule_content needs two arguments"
267                 return 1
268         fi &&
269         submodule="$1" &&
270         commit="$2" &&
271         test -d "$submodule"/ &&
272         if ! test -f "$submodule"/.git && ! test -d "$submodule"/.git
273         then
274                 echo "Submodule $submodule is not populated"
275                 return 1
276         fi &&
277         sha1=$(git rev-parse --verify "$commit:$submodule") &&
278         if test -z "$sha1"
279         then
280                 echo "Couldn't retrieve SHA-1 of $submodule for $commit"
281                 return 1
282         fi &&
283         (
284                 cd "$submodule" &&
285                 git status -u -s >actual &&
286                 test_must_be_empty actual &&
287                 git diff "$sha1" >actual &&
288                 test_must_be_empty actual
289         )
290 }
291
292 # Test that the following transitions are correctly handled:
293 # - Updated submodule
294 # - New submodule
295 # - Removed submodule
296 # - Directory containing tracked files replaced by submodule
297 # - Submodule replaced by tracked files in directory
298 # - Submodule replaced by tracked file with the same name
299 # - tracked file replaced by submodule
300 #
301 # The default is that submodule contents aren't changed until "git submodule
302 # update" is run. And even then that command doesn't delete the work tree of
303 # a removed submodule.
304 #
305 # Removing a submodule containing a .git directory must fail even when forced
306 # to protect the history!
307 #
308
309 # Test that submodule contents are currently not updated when switching
310 # between commits that change a submodule.
311 test_submodule_switch () {
312         command="$1"
313         ######################### Appearing submodule #########################
314         # Switching to a commit letting a submodule appear creates empty dir ...
315         if test "$KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES" = 1
316         then
317                 # Restoring stash fails to restore submodule index entry
318                 RESULT="failure"
319         else
320                 RESULT="success"
321         fi
322         test_expect_$RESULT "$command: added submodule creates empty directory" '
323                 prolog &&
324                 reset_work_tree_to no_submodule &&
325                 (
326                         cd submodule_update &&
327                         git branch -t add_sub1 origin/add_sub1 &&
328                         $command add_sub1 &&
329                         test_superproject_content origin/add_sub1 &&
330                         test_dir_is_empty sub1 &&
331                         git submodule update --init --recursive &&
332                         test_submodule_content sub1 origin/add_sub1
333                 )
334         '
335         # ... and doesn't care if it already exists ...
336         test_expect_$RESULT "$command: added submodule leaves existing empty directory alone" '
337                 prolog &&
338                 reset_work_tree_to no_submodule &&
339                 (
340                         cd submodule_update &&
341                         mkdir sub1 &&
342                         git branch -t add_sub1 origin/add_sub1 &&
343                         $command add_sub1 &&
344                         test_superproject_content origin/add_sub1 &&
345                         test_dir_is_empty sub1 &&
346                         git submodule update --init --recursive &&
347                         test_submodule_content sub1 origin/add_sub1
348                 )
349         '
350         # ... unless there is an untracked file in its place.
351         test_expect_success "$command: added submodule doesn't remove untracked unignored file with same name" '
352                 prolog &&
353                 reset_work_tree_to no_submodule &&
354                 (
355                         cd submodule_update &&
356                         git branch -t add_sub1 origin/add_sub1 &&
357                         >sub1 &&
358                         test_must_fail $command add_sub1 &&
359                         test_superproject_content origin/no_submodule &&
360                         test_must_be_empty sub1
361                 )
362         '
363         # Replacing a tracked file with a submodule produces an empty
364         # directory ...
365         test_expect_$RESULT "$command: replace tracked file with submodule creates empty directory" '
366                 prolog &&
367                 reset_work_tree_to replace_sub1_with_file &&
368                 (
369                         cd submodule_update &&
370                         git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 &&
371                         $command replace_file_with_sub1 &&
372                         test_superproject_content origin/replace_file_with_sub1 &&
373                         test_dir_is_empty sub1 &&
374                         git submodule update --init --recursive &&
375                         test_submodule_content sub1 origin/replace_file_with_sub1
376                 )
377         '
378         # ... as does removing a directory with tracked files with a
379         # submodule.
380         if test "$KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR" = 1
381         then
382                 # Non fast-forward merges fail with "Directory sub1 doesn't
383                 # exist. sub1" because the empty submodule directory is not
384                 # created
385                 RESULT="failure"
386         else
387                 RESULT="success"
388         fi
389         test_expect_$RESULT "$command: replace directory with submodule" '
390                 prolog &&
391                 reset_work_tree_to replace_sub1_with_directory &&
392                 (
393                         cd submodule_update &&
394                         git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 &&
395                         $command replace_directory_with_sub1 &&
396                         test_superproject_content origin/replace_directory_with_sub1 &&
397                         test_dir_is_empty sub1 &&
398                         git submodule update --init --recursive &&
399                         test_submodule_content sub1 origin/replace_directory_with_sub1
400                 )
401         '
402
403         ######################## Disappearing submodule #######################
404         # Removing a submodule doesn't remove its work tree ...
405         if test "$KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES" = 1
406         then
407                 RESULT="failure"
408         else
409                 RESULT="success"
410         fi
411         test_expect_$RESULT "$command: removed submodule leaves submodule directory and its contents in place" '
412                 prolog &&
413                 reset_work_tree_to add_sub1 &&
414                 (
415                         cd submodule_update &&
416                         git branch -t remove_sub1 origin/remove_sub1 &&
417                         $command remove_sub1 &&
418                         test_superproject_content origin/remove_sub1 &&
419                         test_submodule_content sub1 origin/add_sub1
420                 )
421         '
422         # ... especially when it contains a .git directory.
423         test_expect_$RESULT "$command: removed submodule leaves submodule containing a .git directory alone" '
424                 prolog &&
425                 reset_work_tree_to add_sub1 &&
426                 (
427                         cd submodule_update &&
428                         git branch -t remove_sub1 origin/remove_sub1 &&
429                         replace_gitfile_with_git_dir sub1 &&
430                         $command remove_sub1 &&
431                         test_superproject_content origin/remove_sub1 &&
432                         test_git_directory_is_unchanged sub1 &&
433                         test_submodule_content sub1 origin/add_sub1
434                 )
435         '
436         # Replacing a submodule with files in a directory must fail as the
437         # submodule work tree isn't removed ...
438         if test "$KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES" = 1
439         then
440                 # Non fast-forward merges attempt to merge the former
441                 # submodule files with the newly checked out ones in the
442                 # directory of the same name while it shouldn't.
443                 RESULT="failure"
444         else
445                 RESULT="success"
446         fi
447         test_expect_$RESULT "$command: replace submodule with a directory must fail" '
448                 prolog &&
449                 reset_work_tree_to add_sub1 &&
450                 (
451                         cd submodule_update &&
452                         git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
453                         test_must_fail $command replace_sub1_with_directory &&
454                         test_superproject_content origin/add_sub1 &&
455                         test_submodule_content sub1 origin/add_sub1
456                 )
457         '
458         # ... especially when it contains a .git directory.
459         test_expect_$RESULT "$command: replace submodule containing a .git directory with a directory must fail" '
460                 prolog &&
461                 reset_work_tree_to add_sub1 &&
462                 (
463                         cd submodule_update &&
464                         git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
465                         replace_gitfile_with_git_dir sub1 &&
466                         test_must_fail $command replace_sub1_with_directory &&
467                         test_superproject_content origin/add_sub1 &&
468                         test_git_directory_is_unchanged sub1 &&
469                         test_submodule_content sub1 origin/add_sub1
470                 )
471         '
472         # Replacing it with a file must fail as it could throw away any local
473         # work tree changes ...
474         test_expect_failure "$command: replace submodule with a file must fail" '
475                 prolog &&
476                 reset_work_tree_to add_sub1 &&
477                 (
478                         cd submodule_update &&
479                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
480                         test_must_fail $command replace_sub1_with_file &&
481                         test_superproject_content origin/add_sub1 &&
482                         test_submodule_content sub1 origin/add_sub1
483                 )
484         '
485         # ... or even destroy unpushed parts of submodule history if that
486         # still uses a .git directory.
487         test_expect_failure "$command: replace submodule containing a .git directory with a file must fail" '
488                 prolog &&
489                 reset_work_tree_to add_sub1 &&
490                 (
491                         cd submodule_update &&
492                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
493                         replace_gitfile_with_git_dir sub1 &&
494                         test_must_fail $command replace_sub1_with_file &&
495                         test_superproject_content origin/add_sub1 &&
496                         test_git_directory_is_unchanged sub1 &&
497                         test_submodule_content sub1 origin/add_sub1
498                 )
499         '
500
501         ########################## Modified submodule #########################
502         # Updating a submodule sha1 doesn't update the submodule's work tree
503         if test "$KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT" = 1
504         then
505                 # When cherry picking a SHA-1 update for an ignored submodule
506                 # the commit incorrectly fails with "The previous cherry-pick
507                 # is now empty, possibly due to conflict resolution."
508                 RESULT="failure"
509         else
510                 RESULT="success"
511         fi
512         test_expect_$RESULT "$command: modified submodule does not update submodule work tree" '
513                 prolog &&
514                 reset_work_tree_to add_sub1 &&
515                 (
516                         cd submodule_update &&
517                         git branch -t modify_sub1 origin/modify_sub1 &&
518                         $command modify_sub1 &&
519                         test_superproject_content origin/modify_sub1 &&
520                         test_submodule_content sub1 origin/add_sub1 &&
521                         git submodule update &&
522                         test_submodule_content sub1 origin/modify_sub1
523                 )
524         '
525
526         # Updating a submodule to an invalid sha1 doesn't update the
527         # submodule's work tree, subsequent update will fail
528         test_expect_$RESULT "$command: modified submodule does not update submodule work tree to invalid commit" '
529                 prolog &&
530                 reset_work_tree_to add_sub1 &&
531                 (
532                         cd submodule_update &&
533                         git branch -t invalid_sub1 origin/invalid_sub1 &&
534                         $command invalid_sub1 &&
535                         test_superproject_content origin/invalid_sub1 &&
536                         test_submodule_content sub1 origin/add_sub1 &&
537                         test_must_fail git submodule update &&
538                         test_submodule_content sub1 origin/add_sub1
539                 )
540         '
541         # Updating a submodule from an invalid sha1 doesn't update the
542         # submodule's work tree, subsequent update will succeed
543         test_expect_$RESULT "$command: modified submodule does not update submodule work tree from invalid commit" '
544                 prolog &&
545                 reset_work_tree_to invalid_sub1 &&
546                 (
547                         cd submodule_update &&
548                         git branch -t valid_sub1 origin/valid_sub1 &&
549                         $command valid_sub1 &&
550                         test_superproject_content origin/valid_sub1 &&
551                         test_dir_is_empty sub1 &&
552                         git submodule update --init --recursive &&
553                         test_submodule_content sub1 origin/valid_sub1
554                 )
555         '
556 }
557
558 # Test that submodule contents are currently not updated when switching
559 # between commits that change a submodule, but throwing away local changes in
560 # the superproject is allowed.
561 test_submodule_forced_switch () {
562         command="$1"
563         ######################### Appearing submodule #########################
564         # Switching to a commit letting a submodule appear creates empty dir ...
565         test_expect_success "$command: added submodule creates empty directory" '
566                 prolog &&
567                 reset_work_tree_to no_submodule &&
568                 (
569                         cd submodule_update &&
570                         git branch -t add_sub1 origin/add_sub1 &&
571                         $command add_sub1 &&
572                         test_superproject_content origin/add_sub1 &&
573                         test_dir_is_empty sub1 &&
574                         git submodule update --init --recursive &&
575                         test_submodule_content sub1 origin/add_sub1
576                 )
577         '
578         # ... and doesn't care if it already exists ...
579         test_expect_success "$command: added submodule leaves existing empty directory alone" '
580                 prolog &&
581                 reset_work_tree_to no_submodule &&
582                 (
583                         cd submodule_update &&
584                         git branch -t add_sub1 origin/add_sub1 &&
585                         mkdir sub1 &&
586                         $command add_sub1 &&
587                         test_superproject_content origin/add_sub1 &&
588                         test_dir_is_empty sub1 &&
589                         git submodule update --init --recursive &&
590                         test_submodule_content sub1 origin/add_sub1
591                 )
592         '
593         # ... unless there is an untracked file in its place.
594         test_expect_success "$command: added submodule does remove untracked unignored file with same name when forced" '
595                 prolog &&
596                 reset_work_tree_to no_submodule &&
597                 (
598                         cd submodule_update &&
599                         git branch -t add_sub1 origin/add_sub1 &&
600                         >sub1 &&
601                         $command add_sub1 &&
602                         test_superproject_content origin/add_sub1 &&
603                         test_dir_is_empty sub1
604                 )
605         '
606         # Replacing a tracked file with a submodule produces an empty
607         # directory ...
608         test_expect_success "$command: replace tracked file with submodule creates empty directory" '
609                 prolog &&
610                 reset_work_tree_to replace_sub1_with_file &&
611                 (
612                         cd submodule_update &&
613                         git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 &&
614                         $command replace_file_with_sub1 &&
615                         test_superproject_content origin/replace_file_with_sub1 &&
616                         test_dir_is_empty sub1 &&
617                         git submodule update --init --recursive &&
618                         test_submodule_content sub1 origin/replace_file_with_sub1
619                 )
620         '
621         # ... as does removing a directory with tracked files with a
622         # submodule.
623         test_expect_success "$command: replace directory with submodule" '
624                 prolog &&
625                 reset_work_tree_to replace_sub1_with_directory &&
626                 (
627                         cd submodule_update &&
628                         git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 &&
629                         $command replace_directory_with_sub1 &&
630                         test_superproject_content origin/replace_directory_with_sub1 &&
631                         test_dir_is_empty sub1 &&
632                         git submodule update --init --recursive &&
633                         test_submodule_content sub1 origin/replace_directory_with_sub1
634                 )
635         '
636
637         ######################## Disappearing submodule #######################
638         # Removing a submodule doesn't remove its work tree ...
639         test_expect_success "$command: removed submodule leaves submodule directory and its contents in place" '
640                 prolog &&
641                 reset_work_tree_to add_sub1 &&
642                 (
643                         cd submodule_update &&
644                         git branch -t remove_sub1 origin/remove_sub1 &&
645                         $command remove_sub1 &&
646                         test_superproject_content origin/remove_sub1 &&
647                         test_submodule_content sub1 origin/add_sub1
648                 )
649         '
650         # ... especially when it contains a .git directory.
651         test_expect_success "$command: removed submodule leaves submodule containing a .git directory alone" '
652                 prolog &&
653                 reset_work_tree_to add_sub1 &&
654                 (
655                         cd submodule_update &&
656                         git branch -t remove_sub1 origin/remove_sub1 &&
657                         replace_gitfile_with_git_dir sub1 &&
658                         $command remove_sub1 &&
659                         test_superproject_content origin/remove_sub1 &&
660                         test_git_directory_is_unchanged sub1 &&
661                         test_submodule_content sub1 origin/add_sub1
662                 )
663         '
664         # Replacing a submodule with files in a directory must fail as the
665         # submodule work tree isn't removed ...
666         test_expect_failure "$command: replace submodule with a directory must fail" '
667                 prolog &&
668                 reset_work_tree_to add_sub1 &&
669                 (
670                         cd submodule_update &&
671                         git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
672                         test_must_fail $command replace_sub1_with_directory &&
673                         test_superproject_content origin/add_sub1 &&
674                         test_submodule_content sub1 origin/add_sub1
675                 )
676         '
677         # ... especially when it contains a .git directory.
678         test_expect_failure "$command: replace submodule containing a .git directory with a directory must fail" '
679                 prolog &&
680                 reset_work_tree_to add_sub1 &&
681                 (
682                         cd submodule_update &&
683                         git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
684                         replace_gitfile_with_git_dir sub1 &&
685                         test_must_fail $command replace_sub1_with_directory &&
686                         test_superproject_content origin/add_sub1 &&
687                         test_git_directory_is_unchanged sub1 &&
688                         test_submodule_content sub1 origin/add_sub1
689                 )
690         '
691         # Replacing it with a file must fail as it could throw away any local
692         # work tree changes ...
693         test_expect_failure "$command: replace submodule with a file must fail" '
694                 prolog &&
695                 reset_work_tree_to add_sub1 &&
696                 (
697                         cd submodule_update &&
698                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
699                         test_must_fail $command replace_sub1_with_file &&
700                         test_superproject_content origin/add_sub1 &&
701                         test_submodule_content sub1 origin/add_sub1
702                 )
703         '
704         # ... or even destroy unpushed parts of submodule history if that
705         # still uses a .git directory.
706         test_expect_failure "$command: replace submodule containing a .git directory with a file must fail" '
707                 prolog &&
708                 reset_work_tree_to add_sub1 &&
709                 (
710                         cd submodule_update &&
711                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
712                         replace_gitfile_with_git_dir sub1 &&
713                         test_must_fail $command replace_sub1_with_file &&
714                         test_superproject_content origin/add_sub1 &&
715                         test_git_directory_is_unchanged sub1 &&
716                         test_submodule_content sub1 origin/add_sub1
717                 )
718         '
719
720         ########################## Modified submodule #########################
721         # Updating a submodule sha1 doesn't update the submodule's work tree
722         test_expect_success "$command: modified submodule does not update submodule work tree" '
723                 prolog &&
724                 reset_work_tree_to add_sub1 &&
725                 (
726                         cd submodule_update &&
727                         git branch -t modify_sub1 origin/modify_sub1 &&
728                         $command modify_sub1 &&
729                         test_superproject_content origin/modify_sub1 &&
730                         test_submodule_content sub1 origin/add_sub1 &&
731                         git submodule update &&
732                         test_submodule_content sub1 origin/modify_sub1
733                 )
734         '
735         # Updating a submodule to an invalid sha1 doesn't update the
736         # submodule's work tree, subsequent update will fail
737         test_expect_success "$command: modified submodule does not update submodule work tree to invalid commit" '
738                 prolog &&
739                 reset_work_tree_to add_sub1 &&
740                 (
741                         cd submodule_update &&
742                         git branch -t invalid_sub1 origin/invalid_sub1 &&
743                         $command invalid_sub1 &&
744                         test_superproject_content origin/invalid_sub1 &&
745                         test_submodule_content sub1 origin/add_sub1 &&
746                         test_must_fail git submodule update &&
747                         test_submodule_content sub1 origin/add_sub1
748                 )
749         '
750         # Updating a submodule from an invalid sha1 doesn't update the
751         # submodule's work tree, subsequent update will succeed
752         test_expect_success "$command: modified submodule does not update submodule work tree from invalid commit" '
753                 prolog &&
754                 reset_work_tree_to invalid_sub1 &&
755                 (
756                         cd submodule_update &&
757                         git branch -t valid_sub1 origin/valid_sub1 &&
758                         $command valid_sub1 &&
759                         test_superproject_content origin/valid_sub1 &&
760                         test_dir_is_empty sub1 &&
761                         git submodule update --init --recursive &&
762                         test_submodule_content sub1 origin/valid_sub1
763                 )
764         '
765 }
766
767 # Test that submodule contents are correctly updated when switching
768 # between commits that change a submodule.
769 # Test that the following transitions are correctly handled:
770 # (These tests are also above in the case where we expect no change
771 #  in the submodule)
772 # - Updated submodule
773 # - New submodule
774 # - Removed submodule
775 # - Directory containing tracked files replaced by submodule
776 # - Submodule replaced by tracked files in directory
777 # - Submodule replaced by tracked file with the same name
778 # - tracked file replaced by submodule
779 #
780 # New test cases
781 # - Removing a submodule with a git directory absorbs the submodules
782 #   git directory first into the superproject.
783
784 test_submodule_switch_recursing () {
785         command="$1"
786         RESULTDS=success
787         if test "$KNOWN_FAILURE_DIRECTORY_SUBMODULE_CONFLICTS" = 1
788         then
789                 RESULTDS=failure
790         fi
791         RESULTR=success
792         if test "$KNOWN_FAILURE_SUBMODULE_RECURSIVE_NESTED" = 1
793         then
794                 RESULTR=failure
795         fi
796         RESULTOI=success
797         if test "$KNOWN_FAILURE_SUBMODULE_OVERWRITE_IGNORED_UNTRACKED" = 1
798         then
799                 RESULTOI=failure
800         fi
801         ######################### Appearing submodule #########################
802         # Switching to a commit letting a submodule appear checks it out ...
803         test_expect_success "$command: added submodule is checked out" '
804                 prolog &&
805                 reset_work_tree_to_interested no_submodule &&
806                 (
807                         cd submodule_update &&
808                         git branch -t add_sub1 origin/add_sub1 &&
809                         $command add_sub1 &&
810                         test_superproject_content origin/add_sub1 &&
811                         test_submodule_content sub1 origin/add_sub1
812                 )
813         '
814         # ... ignoring an empty existing directory ...
815         test_expect_success "$command: added submodule is checked out in empty dir" '
816                 prolog &&
817                 reset_work_tree_to_interested no_submodule &&
818                 (
819                         cd submodule_update &&
820                         mkdir sub1 &&
821                         git branch -t add_sub1 origin/add_sub1 &&
822                         $command add_sub1 &&
823                         test_superproject_content origin/add_sub1 &&
824                         test_submodule_content sub1 origin/add_sub1
825                 )
826         '
827         # ... unless there is an untracked file in its place.
828         test_expect_success "$command: added submodule doesn't remove untracked file with same name" '
829                 prolog &&
830                 reset_work_tree_to_interested no_submodule &&
831                 (
832                         cd submodule_update &&
833                         git branch -t add_sub1 origin/add_sub1 &&
834                         : >sub1 &&
835                         test_must_fail $command add_sub1 &&
836                         test_superproject_content origin/no_submodule &&
837                         test_must_be_empty sub1
838                 )
839         '
840         # ... but an ignored file is fine.
841         test_expect_$RESULTOI "$command: added submodule removes an untracked ignored file" '
842                 test_when_finished "rm submodule_update/.git/info/exclude" &&
843                 prolog &&
844                 reset_work_tree_to_interested no_submodule &&
845                 (
846                         cd submodule_update &&
847                         git branch -t add_sub1 origin/add_sub1 &&
848                         : >sub1 &&
849                         echo sub1 >.git/info/exclude
850                         $command add_sub1 &&
851                         test_superproject_content origin/add_sub1 &&
852                         test_submodule_content sub1 origin/add_sub1
853                 )
854         '
855         # Replacing a tracked file with a submodule produces a checked out submodule
856         test_expect_success "$command: replace tracked file with submodule checks out submodule" '
857                 prolog &&
858                 reset_work_tree_to_interested replace_sub1_with_file &&
859                 (
860                         cd submodule_update &&
861                         git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 &&
862                         $command replace_file_with_sub1 &&
863                         test_superproject_content origin/replace_file_with_sub1 &&
864                         test_submodule_content sub1 origin/replace_file_with_sub1
865                 )
866         '
867         # ... as does removing a directory with tracked files with a submodule.
868         test_expect_success "$command: replace directory with submodule" '
869                 prolog &&
870                 reset_work_tree_to_interested replace_sub1_with_directory &&
871                 (
872                         cd submodule_update &&
873                         git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 &&
874                         $command replace_directory_with_sub1 &&
875                         test_superproject_content origin/replace_directory_with_sub1 &&
876                         test_submodule_content sub1 origin/replace_directory_with_sub1
877                 )
878         '
879
880         ######################## Disappearing submodule #######################
881         # Removing a submodule removes its work tree ...
882         test_expect_success "$command: removed submodule removes submodules working tree" '
883                 prolog &&
884                 reset_work_tree_to_interested add_sub1 &&
885                 (
886                         cd submodule_update &&
887                         git branch -t remove_sub1 origin/remove_sub1 &&
888                         $command remove_sub1 &&
889                         test_superproject_content origin/remove_sub1 &&
890                         ! test -e sub1
891                 )
892         '
893         # ... absorbing a .git directory along the way.
894         test_expect_success "$command: removed submodule absorbs submodules .git directory" '
895                 prolog &&
896                 reset_work_tree_to_interested add_sub1 &&
897                 (
898                         cd submodule_update &&
899                         git branch -t remove_sub1 origin/remove_sub1 &&
900                         replace_gitfile_with_git_dir sub1 &&
901                         rm -rf .git/modules &&
902                         $command remove_sub1 &&
903                         test_superproject_content origin/remove_sub1 &&
904                         ! test -e sub1 &&
905                         test_git_directory_exists sub1
906                 )
907         '
908         # Replacing a submodule with files in a directory must succeeds
909         # when the submodule is clean
910         test_expect_$RESULTDS "$command: replace submodule with a directory" '
911                 prolog &&
912                 reset_work_tree_to_interested add_sub1 &&
913                 (
914                         cd submodule_update &&
915                         git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
916                         $command replace_sub1_with_directory &&
917                         test_superproject_content origin/replace_sub1_with_directory &&
918                         test_submodule_content sub1 origin/replace_sub1_with_directory
919                 )
920         '
921         # ... absorbing a .git directory.
922         test_expect_$RESULTDS "$command: replace submodule containing a .git directory with a directory must absorb the git dir" '
923                 prolog &&
924                 reset_work_tree_to_interested add_sub1 &&
925                 (
926                         cd submodule_update &&
927                         git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
928                         replace_gitfile_with_git_dir sub1 &&
929                         rm -rf .git/modules &&
930                         $command replace_sub1_with_directory &&
931                         test_superproject_content origin/replace_sub1_with_directory &&
932                         test_git_directory_exists sub1
933                 )
934         '
935
936         # Replacing it with a file ...
937         test_expect_success "$command: replace submodule with a file" '
938                 prolog &&
939                 reset_work_tree_to_interested add_sub1 &&
940                 (
941                         cd submodule_update &&
942                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
943                         $command replace_sub1_with_file &&
944                         test_superproject_content origin/replace_sub1_with_file &&
945                         test -f sub1
946                 )
947         '
948
949         # ... must check its local work tree for untracked files
950         test_expect_$RESULTDS "$command: replace submodule with a file must fail with untracked files" '
951                 prolog &&
952                 reset_work_tree_to_interested add_sub1 &&
953                 (
954                         cd submodule_update &&
955                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
956                         : >sub1/untrackedfile &&
957                         test_must_fail $command replace_sub1_with_file &&
958                         test_superproject_content origin/add_sub1 &&
959                         test_submodule_content sub1 origin/add_sub1
960                 )
961         '
962
963         # ... and ignored files are ignored
964         test_expect_success "$command: replace submodule with a file works ignores ignored files in submodule" '
965                 test_when_finished "rm submodule_update/.git/modules/sub1/info/exclude" &&
966                 prolog &&
967                 reset_work_tree_to_interested add_sub1 &&
968                 (
969                         cd submodule_update &&
970                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
971                         : >sub1/ignored &&
972                         $command replace_sub1_with_file &&
973                         test_superproject_content origin/replace_sub1_with_file &&
974                         test -f sub1
975                 )
976         '
977
978         ########################## Modified submodule #########################
979         # Updating a submodule sha1 updates the submodule's work tree
980         test_expect_success "$command: modified submodule updates submodule work tree" '
981                 prolog &&
982                 reset_work_tree_to_interested add_sub1 &&
983                 (
984                         cd submodule_update &&
985                         git branch -t modify_sub1 origin/modify_sub1 &&
986                         $command modify_sub1 &&
987                         test_superproject_content origin/modify_sub1 &&
988                         test_submodule_content sub1 origin/modify_sub1
989                 )
990         '
991
992         # Updating a submodule to an invalid sha1 doesn't update the
993         # superproject nor the submodule's work tree.
994         test_expect_success "$command: updating to a missing submodule commit fails" '
995                 prolog &&
996                 reset_work_tree_to_interested add_sub1 &&
997                 (
998                         cd submodule_update &&
999                         git branch -t invalid_sub1 origin/invalid_sub1 &&
1000                         test_must_fail $command invalid_sub1 &&
1001                         test_superproject_content origin/add_sub1 &&
1002                         test_submodule_content sub1 origin/add_sub1
1003                 )
1004         '
1005
1006         # recursing deeper than one level doesn't work yet.
1007         test_expect_$RESULTR "$command: modified submodule updates submodule recursively" '
1008                 prolog &&
1009                 reset_work_tree_to_interested add_nested_sub &&
1010                 (
1011                         cd submodule_update &&
1012                         git branch -t modify_sub1_recursively origin/modify_sub1_recursively &&
1013                         $command modify_sub1_recursively &&
1014                         test_superproject_content origin/modify_sub1_recursively &&
1015                         test_submodule_content sub1 origin/modify_sub1_recursively &&
1016                         test_submodule_content -C sub1 sub2 origin/modify_sub1_recursively
1017                 )
1018         '
1019 }
1020
1021 # Test that submodule contents are updated when switching between commits
1022 # that change a submodule, but throwing away local changes in
1023 # the superproject as well as the submodule is allowed.
1024 test_submodule_forced_switch_recursing () {
1025         command="$1"
1026         RESULT=success
1027         if test "$KNOWN_FAILURE_DIRECTORY_SUBMODULE_CONFLICTS" = 1
1028         then
1029                 RESULT=failure
1030         fi
1031         ######################### Appearing submodule #########################
1032         # Switching to a commit letting a submodule appear creates empty dir ...
1033         test_expect_success "$command: added submodule is checked out" '
1034                 prolog &&
1035                 reset_work_tree_to_interested no_submodule &&
1036                 (
1037                         cd submodule_update &&
1038                         git branch -t add_sub1 origin/add_sub1 &&
1039                         $command add_sub1 &&
1040                         test_superproject_content origin/add_sub1 &&
1041                         test_submodule_content sub1 origin/add_sub1
1042                 )
1043         '
1044         # ... and doesn't care if it already exists ...
1045         test_expect_success "$command: added submodule ignores empty directory" '
1046                 prolog &&
1047                 reset_work_tree_to_interested no_submodule &&
1048                 (
1049                         cd submodule_update &&
1050                         git branch -t add_sub1 origin/add_sub1 &&
1051                         mkdir sub1 &&
1052                         $command add_sub1 &&
1053                         test_superproject_content origin/add_sub1 &&
1054                         test_submodule_content sub1 origin/add_sub1
1055                 )
1056         '
1057         # ... not caring about an untracked file either
1058         test_expect_success "$command: added submodule does remove untracked unignored file with same name when forced" '
1059                 prolog &&
1060                 reset_work_tree_to_interested no_submodule &&
1061                 (
1062                         cd submodule_update &&
1063                         git branch -t add_sub1 origin/add_sub1 &&
1064                         >sub1 &&
1065                         $command add_sub1 &&
1066                         test_superproject_content origin/add_sub1 &&
1067                         test_submodule_content sub1 origin/add_sub1
1068                 )
1069         '
1070         # Replacing a tracked file with a submodule checks out the submodule
1071         test_expect_success "$command: replace tracked file with submodule populates the submodule" '
1072                 prolog &&
1073                 reset_work_tree_to_interested replace_sub1_with_file &&
1074                 (
1075                         cd submodule_update &&
1076                         git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 &&
1077                         $command replace_file_with_sub1 &&
1078                         test_superproject_content origin/replace_file_with_sub1 &&
1079                         test_submodule_content sub1 origin/replace_file_with_sub1
1080                 )
1081         '
1082         # ... as does removing a directory with tracked files with a
1083         # submodule.
1084         test_expect_success "$command: replace directory with submodule" '
1085                 prolog &&
1086                 reset_work_tree_to_interested replace_sub1_with_directory &&
1087                 (
1088                         cd submodule_update &&
1089                         git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 &&
1090                         $command replace_directory_with_sub1 &&
1091                         test_superproject_content origin/replace_directory_with_sub1 &&
1092                         test_submodule_content sub1 origin/replace_directory_with_sub1
1093                 )
1094         '
1095
1096         ######################## Disappearing submodule #######################
1097         # Removing a submodule doesn't remove its work tree ...
1098         test_expect_success "$command: removed submodule leaves submodule directory and its contents in place" '
1099                 prolog &&
1100                 reset_work_tree_to_interested add_sub1 &&
1101                 (
1102                         cd submodule_update &&
1103                         git branch -t remove_sub1 origin/remove_sub1 &&
1104                         $command remove_sub1 &&
1105                         test_superproject_content origin/remove_sub1 &&
1106                         ! test -e sub1
1107                 )
1108         '
1109         # ... especially when it contains a .git directory.
1110         test_expect_success "$command: removed submodule leaves submodule containing a .git directory alone" '
1111                 prolog &&
1112                 reset_work_tree_to_interested add_sub1 &&
1113                 (
1114                         cd submodule_update &&
1115                         git branch -t remove_sub1 origin/remove_sub1 &&
1116                         replace_gitfile_with_git_dir sub1 &&
1117                         rm -rf .git/modules/sub1 &&
1118                         $command remove_sub1 &&
1119                         test_superproject_content origin/remove_sub1 &&
1120                         test_git_directory_exists sub1 &&
1121                         ! test -e sub1
1122                 )
1123         '
1124         # Replacing a submodule with files in a directory ...
1125         test_expect_success "$command: replace submodule with a directory" '
1126                 prolog &&
1127                 reset_work_tree_to_interested add_sub1 &&
1128                 (
1129                         cd submodule_update &&
1130                         git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
1131                         $command replace_sub1_with_directory &&
1132                         test_superproject_content origin/replace_sub1_with_directory
1133                 )
1134         '
1135         # ... absorbing a .git directory.
1136         test_expect_success "$command: replace submodule containing a .git directory with a directory must fail" '
1137                 prolog &&
1138                 reset_work_tree_to_interested add_sub1 &&
1139                 (
1140                         cd submodule_update &&
1141                         git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
1142                         replace_gitfile_with_git_dir sub1 &&
1143                         rm -rf .git/modules/sub1 &&
1144                         $command replace_sub1_with_directory &&
1145                         test_superproject_content origin/replace_sub1_with_directory &&
1146                         test_submodule_content sub1 origin/modify_sub1
1147                         test_git_directory_exists sub1
1148                 )
1149         '
1150         # Replacing it with a file
1151         test_expect_success "$command: replace submodule with a file" '
1152                 prolog &&
1153                 reset_work_tree_to_interested add_sub1 &&
1154                 (
1155                         cd submodule_update &&
1156                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
1157                         $command replace_sub1_with_file &&
1158                         test_superproject_content origin/replace_sub1_with_file
1159                 )
1160         '
1161
1162         # ... even if the submodule contains ignored files
1163         test_expect_success "$command: replace submodule with a file ignoring ignored files" '
1164                 prolog &&
1165                 reset_work_tree_to_interested add_sub1 &&
1166                 (
1167                         cd submodule_update &&
1168                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
1169                         : >sub1/expect &&
1170                         $command replace_sub1_with_file &&
1171                         test_superproject_content origin/replace_sub1_with_file
1172                 )
1173         '
1174
1175         # ... but stops for untracked files that would be lost
1176         test_expect_$RESULT "$command: replace submodule with a file stops for untracked files" '
1177                 prolog &&
1178                 reset_work_tree_to_interested add_sub1 &&
1179                 (
1180                         cd submodule_update &&
1181                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
1182                         : >sub1/untracked_file &&
1183                         test_must_fail $command replace_sub1_with_file &&
1184                         test_superproject_content origin/add_sub1 &&
1185                         test -f sub1/untracked_file
1186                 )
1187         '
1188
1189         ########################## Modified submodule #########################
1190         # Updating a submodule sha1 updates the submodule's work tree
1191         test_expect_success "$command: modified submodule updates submodule work tree" '
1192                 prolog &&
1193                 reset_work_tree_to_interested add_sub1 &&
1194                 (
1195                         cd submodule_update &&
1196                         git branch -t modify_sub1 origin/modify_sub1 &&
1197                         $command modify_sub1 &&
1198                         test_superproject_content origin/modify_sub1 &&
1199                         test_submodule_content sub1 origin/modify_sub1
1200                 )
1201         '
1202         # Updating a submodule to an invalid sha1 doesn't update the
1203         # submodule's work tree, subsequent update will fail
1204         test_expect_success "$command: modified submodule does not update submodule work tree to invalid commit" '
1205                 prolog &&
1206                 reset_work_tree_to_interested add_sub1 &&
1207                 (
1208                         cd submodule_update &&
1209                         git branch -t invalid_sub1 origin/invalid_sub1 &&
1210                         test_must_fail $command invalid_sub1 &&
1211                         test_superproject_content origin/add_sub1 &&
1212                         test_submodule_content sub1 origin/add_sub1
1213                 )
1214         '
1215         # Updating a submodule from an invalid sha1 updates
1216         test_expect_success "$command: modified submodule does update submodule work tree from invalid commit" '
1217                 prolog &&
1218                 reset_work_tree_to_interested invalid_sub1 &&
1219                 (
1220                         cd submodule_update &&
1221                         git branch -t valid_sub1 origin/valid_sub1 &&
1222                         $command valid_sub1 &&
1223                         test_superproject_content origin/valid_sub1 &&
1224                         test_submodule_content sub1 origin/valid_sub1
1225                 )
1226         '
1227
1228         # Old versions of Git were buggy writing the .git link file
1229         # (e.g. before f8eaa0ba98b and then moving the superproject repo
1230         # whose submodules contained absolute paths)
1231         test_expect_success "$command: updating submodules fixes .git links" '
1232                 prolog &&
1233                 reset_work_tree_to_interested add_sub1 &&
1234                 (
1235                         cd submodule_update &&
1236                         git branch -t modify_sub1 origin/modify_sub1 &&
1237                         echo "gitdir: bogus/path" >sub1/.git &&
1238                         $command modify_sub1 &&
1239                         test_superproject_content origin/modify_sub1 &&
1240                         test_submodule_content sub1 origin/modify_sub1
1241                 )
1242         '
1243 }