git.oblomov.eu Git - git/blob - t/test-lib.sh

   1 # Test framework for git.  See t/README for usage.
   2 #
   3 # Copyright (c) 2005 Junio C Hamano
   4 #
   5 # This program is free software: you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation, either version 2 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program.  If not, see http://www.gnu.org/licenses/ .
  17
  18 # Keep the original TERM for say_color
  19 ORIGINAL_TERM=$TERM
  20
  21 # Test the binaries we have just built.  The tests are kept in
  22 # t/ subdirectory and are run in 'trash directory' subdirectory.
  23 if test -z "$TEST_DIRECTORY"
  24 then
  25         # We allow tests to override this, in case they want to run tests
  26         # outside of t/, e.g. for running tests on the test library
  27         # itself.
  28         TEST_DIRECTORY=$(pwd)
  29 else
  30         # ensure that TEST_DIRECTORY is an absolute path so that it
  31         # is valid even if the current working directory is changed
  32         TEST_DIRECTORY=$(cd "$TEST_DIRECTORY" && pwd) || exit 1
  33 fi
  34 if test -z "$TEST_OUTPUT_DIRECTORY"
  35 then
  36         # Similarly, override this to store the test-results subdir
  37         # elsewhere
  38         TEST_OUTPUT_DIRECTORY=$TEST_DIRECTORY
  39 fi
  40 GIT_BUILD_DIR="$TEST_DIRECTORY"/..
  41
  42 ################################################################
  43 # It appears that people try to run tests without building...
  44 "$GIT_BUILD_DIR/git" >/dev/null
  45 if test $? != 1
  46 then
  47         echo >&2 'error: you do not seem to have built git yet.'
  48         exit 1
  49 fi
  50
  51 . "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS
  52 export PERL_PATH SHELL_PATH
  53
  54 # if --tee was passed, write the output not only to the terminal, but
  55 # additionally to the file test-results/$BASENAME.out, too.
  56 case "$GIT_TEST_TEE_STARTED, $* " in
  57 done,*)
  58         # do not redirect again
  59         ;;
  60 *' --tee '*|*' --va'*)
  61         mkdir -p "$TEST_OUTPUT_DIRECTORY/test-results"
  62         BASE="$TEST_OUTPUT_DIRECTORY/test-results/$(basename "$0" .sh)"
  63         (GIT_TEST_TEE_STARTED=done ${SHELL_PATH} "$0" "$@" 2>&1;
  64          echo $? > $BASE.exit) | tee $BASE.out
  65         test "$(cat $BASE.exit)" = 0
  66         exit
  67         ;;
  68 esac
  69
  70 # For repeatability, reset the environment to known value.
  71 LANG=C
  72 LC_ALL=C
  73 PAGER=cat
  74 TZ=UTC
  75 TERM=dumb
  76 export LANG LC_ALL PAGER TERM TZ
  77 EDITOR=:
  78 # A call to "unset" with no arguments causes at least Solaris 10
  79 # /usr/xpg4/bin/sh and /bin/ksh to bail out.  So keep the unsets
  80 # deriving from the command substitution clustered with the other
  81 # ones.
  82 unset VISUAL EMAIL LANGUAGE COLUMNS $("$PERL_PATH" -e '
  83         my @env = keys %ENV;
  84         my $ok = join("|", qw(
  85                 TRACE
  86                 DEBUG
  87                 USE_LOOKUP
  88                 TEST
  89                 .*_TEST
  90                 PROVE
  91                 VALGRIND
  92                 UNZIP
  93                 PERF_
  94                 CURL_VERBOSE
  95         ));
  96         my @vars = grep(/^GIT_/ && !/^GIT_($ok)/o, @env);
  97         print join("\n", @vars);
  98 ')
  99 unset XDG_CONFIG_HOME
 100 unset GITPERLLIB
 101 GIT_AUTHOR_EMAIL=author@example.com
 102 GIT_AUTHOR_NAME='A U Thor'
 103 GIT_COMMITTER_EMAIL=committer@example.com
 104 GIT_COMMITTER_NAME='C O Mitter'
 105 GIT_MERGE_VERBOSITY=5
 106 GIT_MERGE_AUTOEDIT=no
 107 export GIT_MERGE_VERBOSITY GIT_MERGE_AUTOEDIT
 108 export GIT_AUTHOR_EMAIL GIT_AUTHOR_NAME
 109 export GIT_COMMITTER_EMAIL GIT_COMMITTER_NAME
 110 export EDITOR
 111
 112 # Tests using GIT_TRACE typically don't want <timestamp> <file>:<line> output
 113 GIT_TRACE_BARE=1
 114 export GIT_TRACE_BARE
 115
 116 if test -n "${TEST_GIT_INDEX_VERSION:+isset}"
 117 then
 118         GIT_INDEX_VERSION="$TEST_GIT_INDEX_VERSION"
 119         export GIT_INDEX_VERSION
 120 fi
 121
 122 # Add libc MALLOC and MALLOC_PERTURB test
 123 # only if we are not executing the test with valgrind
 124 if expr " $GIT_TEST_OPTS " : ".* --valgrind " >/dev/null ||
 125    test -n "$TEST_NO_MALLOC_CHECK"
 126 then
 127         setup_malloc_check () {
 128                 : nothing
 129         }
 130         teardown_malloc_check () {
 131                 : nothing
 132         }
 133 else
 134         setup_malloc_check () {
 135                 MALLOC_CHECK_=3 MALLOC_PERTURB_=165
 136                 export MALLOC_CHECK_ MALLOC_PERTURB_
 137         }
 138         teardown_malloc_check () {
 139                 unset MALLOC_CHECK_ MALLOC_PERTURB_
 140         }
 141 fi
 142
 143 # Protect ourselves from common misconfiguration to export
 144 # CDPATH into the environment
 145 unset CDPATH
 146
 147 unset GREP_OPTIONS
 148 unset UNZIP
 149
 150 case $(echo $GIT_TRACE |tr "[A-Z]" "[a-z]") in
 151 1|2|true)
 152         echo "* warning: Some tests will not work if GIT_TRACE" \
 153                 "is set as to trace on STDERR ! *"
 154         echo "* warning: Please set GIT_TRACE to something" \
 155                 "other than 1, 2 or true ! *"
 156         ;;
 157 esac
 158
 159 # Convenience
 160 #
 161 # A regexp to match 5 and 40 hexdigits
 162 _x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
 163 _x40="$_x05$_x05$_x05$_x05$_x05$_x05$_x05$_x05"
 164
 165 # Zero SHA-1
 166 _z40=0000000000000000000000000000000000000000
 167
 168 # Line feed
 169 LF='
 170 '
 171
 172 export _x05 _x40 _z40 LF
 173
 174 # Each test should start with something like this, after copyright notices:
 175 #
 176 # test_description='Description of this test...
 177 # This test checks if command xyzzy does the right thing...
 178 # '
 179 # . ./test-lib.sh
 180 [ "x$ORIGINAL_TERM" != "xdumb" ] && (
 181                 TERM=$ORIGINAL_TERM &&
 182                 export TERM &&
 183                 [ -t 1 ] &&
 184                 tput bold >/dev/null 2>&1 &&
 185                 tput setaf 1 >/dev/null 2>&1 &&
 186                 tput sgr0 >/dev/null 2>&1
 187         ) &&
 188         color=t
 189
 190 while test "$#" -ne 0
 191 do
 192         case "$1" in
 193         -d|--d|--de|--deb|--debu|--debug)
 194                 debug=t; shift ;;
 195         -i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate)
 196                 immediate=t; shift ;;
 197         -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests)
 198                 GIT_TEST_LONG=t; export GIT_TEST_LONG; shift ;;
 199         -r)
 200                 shift; test "$#" -ne 0 || {
 201                         echo 'error: -r requires an argument' >&2;
 202                         exit 1;
 203                 }
 204                 run_list=$1; shift ;;
 205         --run=*)
 206                 run_list=$(expr "z$1" : 'z[^=]*=\(.*\)'); shift ;;
 207         -h|--h|--he|--hel|--help)
 208                 help=t; shift ;;
 209         -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose)
 210                 verbose=t; shift ;;
 211         --verbose-only=*)
 212                 verbose_only=$(expr "z$1" : 'z[^=]*=\(.*\)')
 213                 shift ;;
 214         -q|--q|--qu|--qui|--quie|--quiet)
 215                 # Ignore --quiet under a TAP::Harness. Saying how many tests
 216                 # passed without the ok/not ok details is always an error.
 217                 test -z "$HARNESS_ACTIVE" && quiet=t; shift ;;
 218         --with-dashes)
 219                 with_dashes=t; shift ;;
 220         --no-color)
 221                 color=; shift ;;
 222         --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind)
 223                 valgrind=memcheck
 224                 shift ;;
 225         --valgrind=*)
 226                 valgrind=$(expr "z$1" : 'z[^=]*=\(.*\)')
 227                 shift ;;
 228         --valgrind-only=*)
 229                 valgrind_only=$(expr "z$1" : 'z[^=]*=\(.*\)')
 230                 shift ;;
 231         --tee)
 232                 shift ;; # was handled already
 233         --root=*)
 234                 root=$(expr "z$1" : 'z[^=]*=\(.*\)')
 235                 shift ;;
 236         -x)
 237                 trace=t
 238                 verbose=t
 239                 shift ;;
 240         *)
 241                 echo "error: unknown test option '$1'" >&2; exit 1 ;;
 242         esac
 243 done
 244
 245 if test -n "$valgrind_only"
 246 then
 247         test -z "$valgrind" && valgrind=memcheck
 248         test -z "$verbose" && verbose_only="$valgrind_only"
 249 elif test -n "$valgrind"
 250 then
 251         verbose=t
 252 fi
 253
 254 if test -n "$color"
 255 then
 256         say_color () {
 257                 (
 258                 TERM=$ORIGINAL_TERM
 259                 export TERM
 260                 case "$1" in
 261                 error)
 262                         tput bold; tput setaf 1;; # bold red
 263                 skip)
 264                         tput setaf 4;; # blue
 265                 warn)
 266                         tput setaf 3;; # brown/yellow
 267                 pass)
 268                         tput setaf 2;; # green
 269                 info)
 270                         tput setaf 6;; # cyan
 271                 *)
 272                         test -n "$quiet" && return;;
 273                 esac
 274                 shift
 275                 printf "%s" "$*"
 276                 tput sgr0
 277                 echo
 278                 )
 279         }
 280 else
 281         say_color() {
 282                 test -z "$1" && test -n "$quiet" && return
 283                 shift
 284                 printf "%s\n" "$*"
 285         }
 286 fi
 287
 288 error () {
 289         say_color error "error: $*"
 290         GIT_EXIT_OK=t
 291         exit 1
 292 }
 293
 294 say () {
 295         say_color info "$*"
 296 }
 297
 298 test "${test_description}" != "" ||
 299 error "Test script did not set test_description."
 300
 301 if test "$help" = "t"
 302 then
 303         printf '%s\n' "$test_description"
 304         exit 0
 305 fi
 306
 307 exec 5>&1
 308 exec 6<&0
 309 if test "$verbose" = "t"
 310 then
 311         exec 4>&2 3>&1
 312 else
 313         exec 4>/dev/null 3>/dev/null
 314 fi
 315
 316 test_failure=0
 317 test_count=0
 318 test_fixed=0
 319 test_broken=0
 320 test_success=0
 321
 322 test_external_has_tap=0
 323
 324 die () {
 325         code=$?
 326         if test -n "$GIT_EXIT_OK"
 327         then
 328                 exit $code
 329         else
 330                 echo >&5 "FATAL: Unexpected exit with code $code"
 331                 exit 1
 332         fi
 333 }
 334
 335 GIT_EXIT_OK=
 336 trap 'die' EXIT
 337
 338 # The user-facing functions are loaded from a separate file so that
 339 # test_perf subshells can have them too
 340 . "$TEST_DIRECTORY/test-lib-functions.sh"
 341
 342 # You are not expected to call test_ok_ and test_failure_ directly, use
 343 # the test_expect_* functions instead.
 344
 345 test_ok_ () {
 346         test_success=$(($test_success + 1))
 347         say_color "" "ok $test_count - $@"
 348 }
 349
 350 test_failure_ () {
 351         test_failure=$(($test_failure + 1))
 352         say_color error "not ok $test_count - $1"
 353         shift
 354         printf '%s\n' "$*" | sed -e 's/^/#      /'
 355         test "$immediate" = "" || { GIT_EXIT_OK=t; exit 1; }
 356 }
 357
 358 test_known_broken_ok_ () {
 359         test_fixed=$(($test_fixed+1))
 360         say_color error "ok $test_count - $@ # TODO known breakage vanished"
 361 }
 362
 363 test_known_broken_failure_ () {
 364         test_broken=$(($test_broken+1))
 365         say_color warn "not ok $test_count - $@ # TODO known breakage"
 366 }
 367
 368 test_debug () {
 369         test "$debug" = "" || eval "$1"
 370 }
 371
 372 match_pattern_list () {
 373         arg="$1"
 374         shift
 375         test -z "$*" && return 1
 376         for pattern_
 377         do
 378                 case "$arg" in
 379                 $pattern_)
 380                         return 0
 381                 esac
 382         done
 383         return 1
 384 }
 385
 386 match_test_selector_list () {
 387         title="$1"
 388         shift
 389         arg="$1"
 390         shift
 391         test -z "$1" && return 0
 392
 393         # Both commas and whitespace are accepted as separators.
 394         OLDIFS=$IFS
 395         IFS='   ,'
 396         set -- $1
 397         IFS=$OLDIFS
 398
 399         # If the first selector is negative we include by default.
 400         include=
 401         case "$1" in
 402                 !*) include=t ;;
 403         esac
 404
 405         for selector
 406         do
 407                 orig_selector=$selector
 408
 409                 positive=t
 410                 case "$selector" in
 411                         !*)
 412                                 positive=
 413                                 selector=${selector##?}
 414                                 ;;
 415                 esac
 416
 417                 test -z "$selector" && continue
 418
 419                 case "$selector" in
 420                         *-*)
 421                                 if expr "z${selector%%-*}" : "z[0-9]*[^0-9]" >/dev/null
 422                                 then
 423                                         echo "error: $title: invalid non-numeric in range" \
 424                                                 "start: '$orig_selector'" >&2
 425                                         exit 1
 426                                 fi
 427                                 if expr "z${selector#*-}" : "z[0-9]*[^0-9]" >/dev/null
 428                                 then
 429                                         echo "error: $title: invalid non-numeric in range" \
 430                                                 "end: '$orig_selector'" >&2
 431                                         exit 1
 432                                 fi
 433                                 ;;
 434                         *)
 435                                 if expr "z$selector" : "z[0-9]*[^0-9]" >/dev/null
 436                                 then
 437                                         echo "error: $title: invalid non-numeric in test" \
 438                                                 "selector: '$orig_selector'" >&2
 439                                         exit 1
 440                                 fi
 441                 esac
 442
 443                 # Short cut for "obvious" cases
 444                 test -z "$include" && test -z "$positive" && continue
 445                 test -n "$include" && test -n "$positive" && continue
 446
 447                 case "$selector" in
 448                         -*)
 449                                 if test $arg -le ${selector#-}
 450                                 then
 451                                         include=$positive
 452                                 fi
 453                                 ;;
 454                         *-)
 455                                 if test $arg -ge ${selector%-}
 456                                 then
 457                                         include=$positive
 458                                 fi
 459                                 ;;
 460                         *-*)
 461                                 if test ${selector%%-*} -le $arg \
 462                                         && test $arg -le ${selector#*-}
 463                                 then
 464                                         include=$positive
 465                                 fi
 466                                 ;;
 467                         *)
 468                                 if test $arg -eq $selector
 469                                 then
 470                                         include=$positive
 471                                 fi
 472                                 ;;
 473                 esac
 474         done
 475
 476         test -n "$include"
 477 }
 478
 479 maybe_teardown_verbose () {
 480         test -z "$verbose_only" && return
 481         exec 4>/dev/null 3>/dev/null
 482         verbose=
 483 }
 484
 485 last_verbose=t
 486 maybe_setup_verbose () {
 487         test -z "$verbose_only" && return
 488         if match_pattern_list $test_count $verbose_only
 489         then
 490                 exec 4>&2 3>&1
 491                 # Emit a delimiting blank line when going from
 492                 # non-verbose to verbose.  Within verbose mode the
 493                 # delimiter is printed by test_expect_*.  The choice
 494                 # of the initial $last_verbose is such that before
 495                 # test 1, we do not print it.
 496                 test -z "$last_verbose" && echo >&3 ""
 497                 verbose=t
 498         else
 499                 exec 4>/dev/null 3>/dev/null
 500                 verbose=
 501         fi
 502         last_verbose=$verbose
 503 }
 504
 505 maybe_teardown_valgrind () {
 506         test -z "$GIT_VALGRIND" && return
 507         GIT_VALGRIND_ENABLED=
 508 }
 509
 510 maybe_setup_valgrind () {
 511         test -z "$GIT_VALGRIND" && return
 512         if test -z "$valgrind_only"
 513         then
 514                 GIT_VALGRIND_ENABLED=t
 515                 return
 516         fi
 517         GIT_VALGRIND_ENABLED=
 518         if match_pattern_list $test_count $valgrind_only
 519         then
 520                 GIT_VALGRIND_ENABLED=t
 521         fi
 522 }
 523
 524 # This is a separate function because some tests use
 525 # "return" to end a test_expect_success block early
 526 # (and we want to make sure we run any cleanup like
 527 # "set +x").
 528 test_eval_inner_ () {
 529         # Do not add anything extra (including LF) after '$*'
 530         eval "
 531                 test \"$trace\" = t && set -x
 532                 $*"
 533 }
 534
 535 test_eval_ () {
 536         # We run this block with stderr redirected to avoid extra cruft
 537         # during a "-x" trace. Once in "set -x" mode, we cannot prevent
 538         # the shell from printing the "set +x" to turn it off (nor the saving
 539         # of $? before that). But we can make sure that the output goes to
 540         # /dev/null.
 541         #
 542         # The test itself is run with stderr put back to &4 (so either to
 543         # /dev/null, or to the original stderr if --verbose was used).
 544         {
 545                 test_eval_inner_ "$@" </dev/null >&3 2>&4
 546                 test_eval_ret_=$?
 547                 if test "$trace" = t
 548                 then
 549                         set +x
 550                         if test "$test_eval_ret_" != 0
 551                         then
 552                                 say_color error >&4 "error: last command exited with \$?=$test_eval_ret_"
 553                         fi
 554                 fi
 555         } 2>/dev/null
 556         return $test_eval_ret_
 557 }
 558
 559 test_run_ () {
 560         test_cleanup=:
 561         expecting_failure=$2
 562         setup_malloc_check
 563         test_eval_ "$1"
 564         eval_ret=$?
 565         teardown_malloc_check
 566
 567         if test -z "$immediate" || test $eval_ret = 0 ||
 568            test -n "$expecting_failure" && test "$test_cleanup" != ":"
 569         then
 570                 setup_malloc_check
 571                 test_eval_ "$test_cleanup"
 572                 teardown_malloc_check
 573         fi
 574         if test "$verbose" = "t" && test -n "$HARNESS_ACTIVE"
 575         then
 576                 echo ""
 577         fi
 578         return "$eval_ret"
 579 }
 580
 581 test_start_ () {
 582         test_count=$(($test_count+1))
 583         maybe_setup_verbose
 584         maybe_setup_valgrind
 585 }
 586
 587 test_finish_ () {
 588         echo >&3 ""
 589         maybe_teardown_valgrind
 590         maybe_teardown_verbose
 591 }
 592
 593 test_skip () {
 594         to_skip=
 595         skipped_reason=
 596         if match_pattern_list $this_test.$test_count $GIT_SKIP_TESTS
 597         then
 598                 to_skip=t
 599                 skipped_reason="GIT_SKIP_TESTS"
 600         fi
 601         if test -z "$to_skip" && test -n "$test_prereq" &&
 602            ! test_have_prereq "$test_prereq"
 603         then
 604                 to_skip=t
 605
 606                 of_prereq=
 607                 if test "$missing_prereq" != "$test_prereq"
 608                 then
 609                         of_prereq=" of $test_prereq"
 610                 fi
 611                 skipped_reason="missing $missing_prereq${of_prereq}"
 612         fi
 613         if test -z "$to_skip" && test -n "$run_list" &&
 614                 ! match_test_selector_list '--run' $test_count "$run_list"
 615         then
 616                 to_skip=t
 617                 skipped_reason="--run"
 618         fi
 619
 620         case "$to_skip" in
 621         t)
 622                 say_color skip >&3 "skipping test: $@"
 623                 say_color skip "ok $test_count # skip $1 ($skipped_reason)"
 624                 : true
 625                 ;;
 626         *)
 627                 false
 628                 ;;
 629         esac
 630 }
 631
 632 # stub; perf-lib overrides it
 633 test_at_end_hook_ () {
 634         :
 635 }
 636
 637 test_done () {
 638         GIT_EXIT_OK=t
 639
 640         if test -z "$HARNESS_ACTIVE"
 641         then
 642                 test_results_dir="$TEST_OUTPUT_DIRECTORY/test-results"
 643                 mkdir -p "$test_results_dir"
 644                 base=${0##*/}
 645                 test_results_path="$test_results_dir/${base%.sh}-$$.counts"
 646
 647                 cat >>"$test_results_path" <<-EOF
 648                 total $test_count
 649                 success $test_success
 650                 fixed $test_fixed
 651                 broken $test_broken
 652                 failed $test_failure
 653
 654                 EOF
 655         fi
 656
 657         if test "$test_fixed" != 0
 658         then
 659                 say_color error "# $test_fixed known breakage(s) vanished; please update test(s)"
 660         fi
 661         if test "$test_broken" != 0
 662         then
 663                 say_color warn "# still have $test_broken known breakage(s)"
 664         fi
 665         if test "$test_broken" != 0 || test "$test_fixed" != 0
 666         then
 667                 test_remaining=$(( $test_count - $test_broken - $test_fixed ))
 668                 msg="remaining $test_remaining test(s)"
 669         else
 670                 test_remaining=$test_count
 671                 msg="$test_count test(s)"
 672         fi
 673         case "$test_failure" in
 674         0)
 675                 # Maybe print SKIP message
 676                 if test -n "$skip_all" && test $test_count -gt 0
 677                 then
 678                         error "Can't use skip_all after running some tests"
 679                 fi
 680                 [ -z "$skip_all" ] || skip_all=" # SKIP $skip_all"
 681
 682                 if test $test_external_has_tap -eq 0
 683                 then
 684                         if test $test_remaining -gt 0
 685                         then
 686                                 say_color pass "# passed all $msg"
 687                         fi
 688                         say "1..$test_count$skip_all"
 689                 fi
 690
 691                 test -d "$remove_trash" &&
 692                 cd "$(dirname "$remove_trash")" &&
 693                 rm -rf "$(basename "$remove_trash")"
 694
 695                 test_at_end_hook_
 696
 697                 exit 0 ;;
 698
 699         *)
 700                 if test $test_external_has_tap -eq 0
 701                 then
 702                         say_color error "# failed $test_failure among $msg"
 703                         say "1..$test_count"
 704                 fi
 705
 706                 exit 1 ;;
 707
 708         esac
 709 }
 710
 711 if test -n "$valgrind"
 712 then
 713         make_symlink () {
 714                 test -h "$2" &&
 715                 test "$1" = "$(readlink "$2")" || {
 716                         # be super paranoid
 717                         if mkdir "$2".lock
 718                         then
 719                                 rm -f "$2" &&
 720                                 ln -s "$1" "$2" &&
 721                                 rm -r "$2".lock
 722                         else
 723                                 while test -d "$2".lock
 724                                 do
 725                                         say "Waiting for lock on $2."
 726                                         sleep 1
 727                                 done
 728                         fi
 729                 }
 730         }
 731
 732         make_valgrind_symlink () {
 733                 # handle only executables, unless they are shell libraries that
 734                 # need to be in the exec-path.
 735                 test -x "$1" ||
 736                 test "# " = "$(head -c 2 <"$1")" ||
 737                 return;
 738
 739                 base=$(basename "$1")
 740                 symlink_target=$GIT_BUILD_DIR/$base
 741                 # do not override scripts
 742                 if test -x "$symlink_target" &&
 743                     test ! -d "$symlink_target" &&
 744                     test "#!" != "$(head -c 2 < "$symlink_target")"
 745                 then
 746                         symlink_target=../valgrind.sh
 747                 fi
 748                 case "$base" in
 749                 *.sh|*.perl)
 750                         symlink_target=../unprocessed-script
 751                 esac
 752                 # create the link, or replace it if it is out of date
 753                 make_symlink "$symlink_target" "$GIT_VALGRIND/bin/$base" || exit
 754         }
 755
 756         # override all git executables in TEST_DIRECTORY/..
 757         GIT_VALGRIND=$TEST_DIRECTORY/valgrind
 758         mkdir -p "$GIT_VALGRIND"/bin
 759         for file in $GIT_BUILD_DIR/git* $GIT_BUILD_DIR/test-*
 760         do
 761                 make_valgrind_symlink $file
 762         done
 763         # special-case the mergetools loadables
 764         make_symlink "$GIT_BUILD_DIR"/mergetools "$GIT_VALGRIND/bin/mergetools"
 765         OLDIFS=$IFS
 766         IFS=:
 767         for path in $PATH
 768         do
 769                 ls "$path"/git-* 2> /dev/null |
 770                 while read file
 771                 do
 772                         make_valgrind_symlink "$file"
 773                 done
 774         done
 775         IFS=$OLDIFS
 776         PATH=$GIT_VALGRIND/bin:$PATH
 777         GIT_EXEC_PATH=$GIT_VALGRIND/bin
 778         export GIT_VALGRIND
 779         GIT_VALGRIND_MODE="$valgrind"
 780         export GIT_VALGRIND_MODE
 781         GIT_VALGRIND_ENABLED=t
 782         test -n "$valgrind_only" && GIT_VALGRIND_ENABLED=
 783         export GIT_VALGRIND_ENABLED
 784 elif test -n "$GIT_TEST_INSTALLED"
 785 then
 786         GIT_EXEC_PATH=$($GIT_TEST_INSTALLED/git --exec-path)  ||
 787         error "Cannot run git from $GIT_TEST_INSTALLED."
 788         PATH=$GIT_TEST_INSTALLED:$GIT_BUILD_DIR:$PATH
 789         GIT_EXEC_PATH=${GIT_TEST_EXEC_PATH:-$GIT_EXEC_PATH}
 790 else # normal case, use ../bin-wrappers only unless $with_dashes:
 791         git_bin_dir="$GIT_BUILD_DIR/bin-wrappers"
 792         if ! test -x "$git_bin_dir/git"
 793         then
 794                 if test -z "$with_dashes"
 795                 then
 796                         say "$git_bin_dir/git is not executable; using GIT_EXEC_PATH"
 797                 fi
 798                 with_dashes=t
 799         fi
 800         PATH="$git_bin_dir:$PATH"
 801         GIT_EXEC_PATH=$GIT_BUILD_DIR
 802         if test -n "$with_dashes"
 803         then
 804                 PATH="$GIT_BUILD_DIR:$PATH"
 805         fi
 806 fi
 807 GIT_TEMPLATE_DIR="$GIT_BUILD_DIR"/templates/blt
 808 GIT_CONFIG_NOSYSTEM=1
 809 GIT_ATTR_NOSYSTEM=1
 810 export PATH GIT_EXEC_PATH GIT_TEMPLATE_DIR GIT_CONFIG_NOSYSTEM GIT_ATTR_NOSYSTEM
 811
 812 if test -z "$GIT_TEST_CMP"
 813 then
 814         if test -n "$GIT_TEST_CMP_USE_COPIED_CONTEXT"
 815         then
 816                 GIT_TEST_CMP="$DIFF -c"
 817         else
 818                 GIT_TEST_CMP="$DIFF -u"
 819         fi
 820 fi
 821
 822 GITPERLLIB="$GIT_BUILD_DIR"/perl/blib/lib:"$GIT_BUILD_DIR"/perl/blib/arch/auto/Git
 823 export GITPERLLIB
 824 test -d "$GIT_BUILD_DIR"/templates/blt || {
 825         error "You haven't built things yet, have you?"
 826 }
 827
 828 if ! test -x "$GIT_BUILD_DIR"/test-chmtime
 829 then
 830         echo >&2 'You need to build test-chmtime:'
 831         echo >&2 'Run "make test-chmtime" in the source (toplevel) directory'
 832         exit 1
 833 fi
 834
 835 # Test repository
 836 TRASH_DIRECTORY="trash directory.$(basename "$0" .sh)"
 837 test -n "$root" && TRASH_DIRECTORY="$root/$TRASH_DIRECTORY"
 838 case "$TRASH_DIRECTORY" in
 839 /*) ;; # absolute path is good
 840  *) TRASH_DIRECTORY="$TEST_OUTPUT_DIRECTORY/$TRASH_DIRECTORY" ;;
 841 esac
 842 test ! -z "$debug" || remove_trash=$TRASH_DIRECTORY
 843 rm -fr "$TRASH_DIRECTORY" || {
 844         GIT_EXIT_OK=t
 845         echo >&5 "FATAL: Cannot prepare test area"
 846         exit 1
 847 }
 848
 849 HOME="$TRASH_DIRECTORY"
 850 GNUPGHOME="$HOME/gnupg-home-not-used"
 851 export HOME GNUPGHOME
 852
 853 if test -z "$TEST_NO_CREATE_REPO"
 854 then
 855         test_create_repo "$TRASH_DIRECTORY"
 856 else
 857         mkdir -p "$TRASH_DIRECTORY"
 858 fi
 859 # Use -P to resolve symlinks in our working directory so that the cwd
 860 # in subprocesses like git equals our $PWD (for pathname comparisons).
 861 cd -P "$TRASH_DIRECTORY" || exit 1
 862
 863 this_test=${0##*/}
 864 this_test=${this_test%%-*}
 865 if match_pattern_list "$this_test" $GIT_SKIP_TESTS
 866 then
 867         say_color info >&3 "skipping test $this_test altogether"
 868         skip_all="skip all tests in $this_test"
 869         test_done
 870 fi
 871
 872 # Provide an implementation of the 'yes' utility
 873 yes () {
 874         if test $# = 0
 875         then
 876                 y=y
 877         else
 878                 y="$*"
 879         fi
 880
 881         while echo "$y"
 882         do
 883                 :
 884         done
 885 }
 886
 887 # Fix some commands on Windows
 888 case $(uname -s) in
 889 *MINGW*)
 890         # Windows has its own (incompatible) sort and find
 891         sort () {
 892                 /usr/bin/sort "$@"
 893         }
 894         find () {
 895                 /usr/bin/find "$@"
 896         }
 897         sum () {
 898                 md5sum "$@"
 899         }
 900         # git sees Windows-style pwd
 901         pwd () {
 902                 builtin pwd -W
 903         }
 904         # no POSIX permissions
 905         # backslashes in pathspec are converted to '/'
 906         # exec does not inherit the PID
 907         test_set_prereq MINGW
 908         test_set_prereq NATIVE_CRLF
 909         test_set_prereq SED_STRIPS_CR
 910         test_set_prereq GREP_STRIPS_CR
 911         GIT_TEST_CMP=mingw_test_cmp
 912         ;;
 913 *CYGWIN*)
 914         test_set_prereq POSIXPERM
 915         test_set_prereq EXECKEEPSPID
 916         test_set_prereq CYGWIN
 917         test_set_prereq SED_STRIPS_CR
 918         test_set_prereq GREP_STRIPS_CR
 919         ;;
 920 *)
 921         test_set_prereq POSIXPERM
 922         test_set_prereq BSLASHPSPEC
 923         test_set_prereq EXECKEEPSPID
 924         ;;
 925 esac
 926
 927 ( COLUMNS=1 && test $COLUMNS = 1 ) && test_set_prereq COLUMNS_CAN_BE_1
 928 test -z "$NO_PERL" && test_set_prereq PERL
 929 test -z "$NO_PYTHON" && test_set_prereq PYTHON
 930 test -n "$USE_LIBPCRE" && test_set_prereq LIBPCRE
 931 test -z "$NO_GETTEXT" && test_set_prereq GETTEXT
 932
 933 # Can we rely on git's output in the C locale?
 934 if test -n "$GETTEXT_POISON"
 935 then
 936         GIT_GETTEXT_POISON=YesPlease
 937         export GIT_GETTEXT_POISON
 938         test_set_prereq GETTEXT_POISON
 939 else
 940         test_set_prereq C_LOCALE_OUTPUT
 941 fi
 942
 943 # Use this instead of test_cmp to compare files that contain expected and
 944 # actual output from git commands that can be translated.  When running
 945 # under GETTEXT_POISON this pretends that the command produced expected
 946 # results.
 947 test_i18ncmp () {
 948         test -n "$GETTEXT_POISON" || test_cmp "$@"
 949 }
 950
 951 # Use this instead of "grep expected-string actual" to see if the
 952 # output from a git command that can be translated either contains an
 953 # expected string, or does not contain an unwanted one.  When running
 954 # under GETTEXT_POISON this pretends that the command produced expected
 955 # results.
 956 test_i18ngrep () {
 957         if test -n "$GETTEXT_POISON"
 958         then
 959             : # pretend success
 960         elif test "x!" = "x$1"
 961         then
 962                 shift
 963                 ! grep "$@"
 964         else
 965                 grep "$@"
 966         fi
 967 }
 968
 969 test_lazy_prereq PIPE '
 970         # test whether the filesystem supports FIFOs
 971         case $(uname -s) in
 972         CYGWIN*)
 973                 false
 974                 ;;
 975         *)
 976                 rm -f testfifo && mkfifo testfifo
 977                 ;;
 978         esac
 979 '
 980
 981 test_lazy_prereq SYMLINKS '
 982         # test whether the filesystem supports symbolic links
 983         ln -s x y && test -h y
 984 '
 985
 986 test_lazy_prereq FILEMODE '
 987         test "$(git config --bool core.filemode)" = true
 988 '
 989
 990 test_lazy_prereq CASE_INSENSITIVE_FS '
 991         echo good >CamelCase &&
 992         echo bad >camelcase &&
 993         test "$(cat CamelCase)" != good
 994 '
 995
 996 test_lazy_prereq UTF8_NFD_TO_NFC '
 997         # check whether FS converts nfd unicode to nfc
 998         auml=$(printf "\303\244")
 999         aumlcdiar=$(printf "\141\314\210")
1000         >"$auml" &&
1001         case "$(echo *)" in
1002         "$aumlcdiar")
1003                 true ;;
1004         *)
1005                 false ;;
1006         esac
1007 '
1008
1009 test_lazy_prereq AUTOIDENT '
1010         sane_unset GIT_AUTHOR_NAME &&
1011         sane_unset GIT_AUTHOR_EMAIL &&
1012         git var GIT_AUTHOR_IDENT
1013 '
1014
1015 test_lazy_prereq EXPENSIVE '
1016         test -n "$GIT_TEST_LONG"
1017 '
1018
1019 test_lazy_prereq USR_BIN_TIME '
1020         test -x /usr/bin/time
1021 '
1022
1023 # When the tests are run as root, permission tests will report that
1024 # things are writable when they shouldn't be.
1025 test -w / || test_set_prereq SANITY
1026
1027 GIT_UNZIP=${GIT_UNZIP:-unzip}
1028 test_lazy_prereq UNZIP '
1029         "$GIT_UNZIP" -v
1030         test $? -ne 127
1031 '