The second batch
[git] / pkt-line.h
1 #ifndef PKTLINE_H
2 #define PKTLINE_H
3
4 #include "git-compat-util.h"
5 #include "strbuf.h"
6 #include "sideband.h"
7
8 /*
9  * Write a packetized stream, where each line is preceded by
10  * its length (including the header) as a 4-byte hex number.
11  * A length of 'zero' means end of stream (and a length of 1-3
12  * would be an error).
13  *
14  * This is all pretty stupid, but we use this packetized line
15  * format to make a streaming format possible without ever
16  * over-running the read buffers. That way we'll never read
17  * into what might be the pack data (which should go to another
18  * process entirely).
19  *
20  * The writing side could use stdio, but since the reading
21  * side can't, we stay with pure read/write interfaces.
22  */
23 void packet_flush(int fd);
24 void packet_delim(int fd);
25 void packet_response_end(int fd);
26 void packet_write_fmt(int fd, const char *fmt, ...) __attribute__((format (printf, 2, 3)));
27 void packet_buf_flush(struct strbuf *buf);
28 void packet_buf_delim(struct strbuf *buf);
29 void set_packet_header(char *buf, int size);
30 void packet_write(int fd_out, const char *buf, size_t size);
31 void packet_buf_write(struct strbuf *buf, const char *fmt, ...) __attribute__((format (printf, 2, 3)));
32 void packet_buf_write_len(struct strbuf *buf, const char *data, size_t len);
33 int packet_flush_gently(int fd);
34 int packet_write_fmt_gently(int fd, const char *fmt, ...) __attribute__((format (printf, 2, 3)));
35 int write_packetized_from_fd_no_flush(int fd_in, int fd_out);
36 int write_packetized_from_buf_no_flush(const char *src_in, size_t len, int fd_out);
37
38 /*
39  * Read a packetized line into the buffer, which must be at least size bytes
40  * long. The return value specifies the number of bytes read into the buffer.
41  *
42  * If src_buffer and *src_buffer are not NULL, it should point to a buffer
43  * containing the packet data to parse, of at least *src_len bytes.  After the
44  * function returns, src_buf will be incremented and src_len decremented by the
45  * number of bytes consumed.
46  *
47  * If src_buffer (or *src_buffer) is NULL, then data is read from the
48  * descriptor "fd".
49  *
50  * If options does not contain PACKET_READ_GENTLE_ON_EOF, we will die under any
51  * of the following conditions:
52  *
53  *   1. Read error from descriptor.
54  *
55  *   2. Protocol error from the remote (e.g., bogus length characters).
56  *
57  *   3. Receiving a packet larger than "size" bytes.
58  *
59  *   4. Truncated output from the remote (e.g., we expected a packet but got
60  *      EOF, or we got a partial packet followed by EOF).
61  *
62  * If options does contain PACKET_READ_GENTLE_ON_EOF, we will not die on
63  * condition 4 (truncated input), but instead return -1. However, we will still
64  * die for the other 3 conditions.
65  *
66  * If options contains PACKET_READ_CHOMP_NEWLINE, a trailing newline (if
67  * present) is removed from the buffer before returning.
68  *
69  * If options contains PACKET_READ_DIE_ON_ERR_PACKET, it dies when it sees an
70  * ERR packet.
71  *
72  * If options contains PACKET_READ_GENTLE_ON_READ_ERROR, we will not die
73  * on read errors, but instead return -1.  However, we may still die on an
74  * ERR packet (if requested).
75  */
76 #define PACKET_READ_GENTLE_ON_EOF        (1u<<0)
77 #define PACKET_READ_CHOMP_NEWLINE        (1u<<1)
78 #define PACKET_READ_DIE_ON_ERR_PACKET    (1u<<2)
79 #define PACKET_READ_GENTLE_ON_READ_ERROR (1u<<3)
80 int packet_read(int fd, char **src_buffer, size_t *src_len, char
81                 *buffer, unsigned size, int options);
82
83 /*
84  * Convert a four hex digit packet line length header into its numeric
85  * representation.
86  *
87  * If lenbuf_hex contains non-hex characters, return -1. Otherwise, return the
88  * numeric value of the length header.
89  */
90 int packet_length(const char lenbuf_hex[4]);
91
92 /*
93  * Read a packetized line into a buffer like the 'packet_read()' function but
94  * returns an 'enum packet_read_status' which indicates the status of the read.
95  * The number of bytes read will be assigned to *pktlen if the status of the
96  * read was 'PACKET_READ_NORMAL'.
97  */
98 enum packet_read_status {
99         PACKET_READ_EOF,
100         PACKET_READ_NORMAL,
101         PACKET_READ_FLUSH,
102         PACKET_READ_DELIM,
103         PACKET_READ_RESPONSE_END,
104 };
105 enum packet_read_status packet_read_with_status(int fd, char **src_buffer,
106                                                 size_t *src_len, char *buffer,
107                                                 unsigned size, int *pktlen,
108                                                 int options);
109
110 /*
111  * Convenience wrapper for packet_read that is not gentle, and sets the
112  * CHOMP_NEWLINE option. The return value is NULL for a flush packet,
113  * and otherwise points to a static buffer (that may be overwritten by
114  * subsequent calls). If the size parameter is not NULL, the length of the
115  * packet is written to it.
116  */
117 char *packet_read_line(int fd, int *size);
118
119 /*
120  * Convenience wrapper for packet_read that sets the PACKET_READ_GENTLE_ON_EOF
121  * and CHOMP_NEWLINE options. The return value specifies the number of bytes
122  * read into the buffer or -1 on truncated input. If the *dst_line parameter
123  * is not NULL it will return NULL for a flush packet or when the number of
124  * bytes copied is zero and otherwise points to a static buffer (that may be
125  * overwritten by subsequent calls). If the size parameter is not NULL, the
126  * length of the packet is written to it.
127  */
128 int packet_read_line_gently(int fd, int *size, char **dst_line);
129
130 /*
131  * Same as packet_read_line, but read from a buf rather than a descriptor;
132  * see packet_read for details on how src_* is used.
133  */
134 char *packet_read_line_buf(char **src_buf, size_t *src_len, int *size);
135
136 /*
137  * Reads a stream of variable sized packets until a flush packet is detected.
138  */
139 ssize_t read_packetized_to_strbuf(int fd_in, struct strbuf *sb_out, int options);
140
141 /*
142  * Receive multiplexed output stream over git native protocol.
143  * in_stream is the input stream from the remote, which carries data
144  * in pkt_line format with band designator.  Demultiplex it into out
145  * and err and return error appropriately.  Band #1 carries the
146  * primary payload.  Things coming over band #2 is not necessarily
147  * error; they are usually informative message on the standard error
148  * stream, aka "verbose").  A message over band #3 is a signal that
149  * the remote died unexpectedly.  A flush() concludes the stream.
150  *
151  * Returns SIDEBAND_FLUSH upon a normal conclusion, and SIDEBAND_PROTOCOL_ERROR
152  * or SIDEBAND_REMOTE_ERROR if an error occurred.
153  */
154 int recv_sideband(const char *me, int in_stream, int out);
155
156 struct packet_reader {
157         /* source file descriptor */
158         int fd;
159
160         /* source buffer and its size */
161         char *src_buffer;
162         size_t src_len;
163
164         /* buffer that pkt-lines are read into and its size */
165         char *buffer;
166         unsigned buffer_size;
167
168         /* options to be used during reads */
169         int options;
170
171         /* status of the last read */
172         enum packet_read_status status;
173
174         /* length of data read during the last read */
175         int pktlen;
176
177         /* the last line read */
178         const char *line;
179
180         /* indicates if a line has been peeked */
181         int line_peeked;
182
183         unsigned use_sideband : 1;
184         const char *me;
185
186         /* hash algorithm in use */
187         const struct git_hash_algo *hash_algo;
188 };
189
190 /*
191  * Initialize a 'struct packet_reader' object which is an
192  * abstraction around the 'packet_read_with_status()' function.
193  */
194 void packet_reader_init(struct packet_reader *reader, int fd,
195                         char *src_buffer, size_t src_len,
196                         int options);
197
198 /*
199  * Perform a packet read and return the status of the read.
200  * The values of 'pktlen' and 'line' are updated based on the status of the
201  * read as follows:
202  *
203  * PACKET_READ_ERROR: 'pktlen' is set to '-1' and 'line' is set to NULL
204  * PACKET_READ_NORMAL: 'pktlen' is set to the number of bytes read
205  *                     'line' is set to point at the read line
206  * PACKET_READ_FLUSH: 'pktlen' is set to '0' and 'line' is set to NULL
207  */
208 enum packet_read_status packet_reader_read(struct packet_reader *reader);
209
210 /*
211  * Peek the next packet line without consuming it and return the status.
212  * The next call to 'packet_reader_read()' will perform a read of the same line
213  * that was peeked, consuming the line.
214  *
215  * Peeking multiple times without calling 'packet_reader_read()' will return
216  * the same result.
217  */
218 enum packet_read_status packet_reader_peek(struct packet_reader *reader);
219
220 #define DEFAULT_PACKET_MAX 1000
221 #define LARGE_PACKET_MAX 65520
222 #define LARGE_PACKET_DATA_MAX (LARGE_PACKET_MAX - 4)
223 extern char packet_buffer[LARGE_PACKET_MAX];
224
225 struct packet_writer {
226         int dest_fd;
227         unsigned use_sideband : 1;
228 };
229
230 void packet_writer_init(struct packet_writer *writer, int dest_fd);
231
232 /* These functions die upon failure. */
233 __attribute__((format (printf, 2, 3)))
234 void packet_writer_write(struct packet_writer *writer, const char *fmt, ...);
235 __attribute__((format (printf, 2, 3)))
236 void packet_writer_error(struct packet_writer *writer, const char *fmt, ...);
237 void packet_writer_delim(struct packet_writer *writer);
238 void packet_writer_flush(struct packet_writer *writer);
239
240 #endif