4 The Git configuration file contains a number of variables that affect
5 the Git commands' behavior. The `.git/config` file in each repository
6 is used to store the configuration for that repository, and
7 `$HOME/.gitconfig` is used to store a per-user configuration as
8 fallback values for the `.git/config` file. The file `/etc/gitconfig`
9 can be used to store a system-wide default configuration.
11 The configuration variables are used by both the Git plumbing
12 and the porcelains. The variables are divided into sections, wherein
13 the fully qualified variable name of the variable itself is the last
14 dot-separated segment and the section name is everything before the last
15 dot. The variable names are case-insensitive, allow only alphanumeric
16 characters and `-`, and must start with an alphabetic character. Some
17 variables may appear multiple times; we say then that the variable is
23 The syntax is fairly flexible and permissive; whitespaces are mostly
24 ignored. The '#' and ';' characters begin comments to the end of line,
25 blank lines are ignored.
27 The file consists of sections and variables. A section begins with
28 the name of the section in square brackets and continues until the next
29 section begins. Section names are case-insensitive. Only alphanumeric
30 characters, `-` and `.` are allowed in section names. Each variable
31 must belong to some section, which means that there must be a section
32 header before the first setting of a variable.
34 Sections can be further divided into subsections. To begin a subsection
35 put its name in double quotes, separated by space from the section name,
36 in the section header, like in the example below:
39 [section "subsection"]
43 Subsection names are case sensitive and can contain any characters except
44 newline and the null byte. Doublequote `"` and backslash can be included
45 by escaping them as `\"` and `\\`, respectively. Backslashes preceding
46 other characters are dropped when reading; for example, `\t` is read as
47 `t` and `\0` is read as `0` Section headers cannot span multiple lines.
48 Variables may belong directly to a section or to a given subsection. You
49 can have `[section]` if you have `[section "subsection"]`, but you don't
52 There is also a deprecated `[section.subsection]` syntax. With this
53 syntax, the subsection name is converted to lower-case and is also
54 compared case sensitively. These subsection names follow the same
55 restrictions as section names.
57 All the other lines (and the remainder of the line after the section
58 header) are recognized as setting variables, in the form
59 'name = value' (or just 'name', which is a short-hand to say that
60 the variable is the boolean "true").
61 The variable names are case-insensitive, allow only alphanumeric characters
62 and `-`, and must start with an alphabetic character.
64 A line that defines a value can be continued to the next line by
65 ending it with a `\`; the backquote and the end-of-line are
66 stripped. Leading whitespaces after 'name =', the remainder of the
67 line after the first comment character '#' or ';', and trailing
68 whitespaces of the line are discarded unless they are enclosed in
69 double quotes. Internal whitespaces within the value are retained
72 Inside double quotes, double quote `"` and backslash `\` characters
73 must be escaped: use `\"` for `"` and `\\` for `\`.
75 The following escape sequences (beside `\"` and `\\`) are recognized:
76 `\n` for newline character (NL), `\t` for horizontal tabulation (HT, TAB)
77 and `\b` for backspace (BS). Other char escape sequences (including octal
78 escape sequences) are invalid.
84 The `include` and `includeIf` sections allow you to include config
85 directives from another source. These sections behave identically to
86 each other with the exception that `includeIf` sections may be ignored
87 if their condition does not evaluate to true; see "Conditional includes"
90 You can include a config file from another by setting the special
91 `include.path` (or `includeIf.*.path`) variable to the name of the file
92 to be included. The variable takes a pathname as its value, and is
93 subject to tilde expansion. These variables can be given multiple times.
95 The contents of the included file are inserted immediately, as if they
96 had been found at the location of the include directive. If the value of the
97 variable is a relative path, the path is considered to
98 be relative to the configuration file in which the include directive
99 was found. See below for examples.
104 You can include a config file from another conditionally by setting a
105 `includeIf.<condition>.path` variable to the name of the file to be
108 The condition starts with a keyword followed by a colon and some data
109 whose format and meaning depends on the keyword. Supported keywords
114 The data that follows the keyword `gitdir:` is used as a glob
115 pattern. If the location of the .git directory matches the
116 pattern, the include condition is met.
118 The .git location may be auto-discovered, or come from `$GIT_DIR`
119 environment variable. If the repository is auto discovered via a .git
120 file (e.g. from submodules, or a linked worktree), the .git location
121 would be the final location where the .git directory is, not where the
124 The pattern can contain standard globbing wildcards and two additional
125 ones, `**/` and `/**`, that can match multiple path components. Please
126 refer to linkgit:gitignore[5] for details. For convenience:
128 * If the pattern starts with `~/`, `~` will be substituted with the
129 content of the environment variable `HOME`.
131 * If the pattern starts with `./`, it is replaced with the directory
132 containing the current config file.
134 * If the pattern does not start with either `~/`, `./` or `/`, `**/`
135 will be automatically prepended. For example, the pattern `foo/bar`
136 becomes `**/foo/bar` and would match `/any/path/to/foo/bar`.
138 * If the pattern ends with `/`, `**` will be automatically added. For
139 example, the pattern `foo/` becomes `foo/**`. In other words, it
140 matches "foo" and everything inside, recursively.
143 This is the same as `gitdir` except that matching is done
144 case-insensitively (e.g. on case-insensitive file sytems)
146 A few more notes on matching via `gitdir` and `gitdir/i`:
148 * Symlinks in `$GIT_DIR` are not resolved before matching.
150 * Both the symlink & realpath versions of paths will be matched
151 outside of `$GIT_DIR`. E.g. if ~/git is a symlink to
152 /mnt/storage/git, both `gitdir:~/git` and `gitdir:/mnt/storage/git`
155 This was not the case in the initial release of this feature in
156 v2.13.0, which only matched the realpath version. Configuration that
157 wants to be compatible with the initial release of this feature needs
158 to either specify only the realpath version, or both versions.
160 * Note that "../" is not special and will match literally, which is
161 unlikely what you want.
168 ; Don't trust file modes
173 external = /usr/local/bin/diff-wrapper
178 merge = refs/heads/devel
182 gitProxy="ssh" for "kernel.org"
183 gitProxy=default-proxy ; for the rest
186 path = /path/to/foo.inc ; include by absolute path
187 path = foo.inc ; find "foo.inc" relative to the current file
188 path = ~/foo.inc ; find "foo.inc" in your `$HOME` directory
190 ; include if $GIT_DIR is /path/to/foo/.git
191 [includeIf "gitdir:/path/to/foo/.git"]
192 path = /path/to/foo.inc
194 ; include for all repositories inside /path/to/group
195 [includeIf "gitdir:/path/to/group/"]
196 path = /path/to/foo.inc
198 ; include for all repositories inside $HOME/to/group
199 [includeIf "gitdir:~/to/group/"]
200 path = /path/to/foo.inc
202 ; relative paths are always relative to the including
203 ; file (if the condition is true); their location is not
204 ; affected by the condition
205 [includeIf "gitdir:/path/to/group/"]
211 Values of many variables are treated as a simple string, but there
212 are variables that take values of specific types and there are rules
213 as to how to spell them.
217 When a variable is said to take a boolean value, many
218 synonyms are accepted for 'true' and 'false'; these are all
221 true;; Boolean true literals are `yes`, `on`, `true`,
222 and `1`. Also, a variable defined without `= <value>`
225 false;; Boolean false literals are `no`, `off`, `false`,
226 `0` and the empty string.
228 When converting value to the canonical form using `--bool` type
229 specifier, 'git config' will ensure that the output is "true" or
230 "false" (spelled in lowercase).
233 The value for many variables that specify various sizes can
234 be suffixed with `k`, `M`,... to mean "scale the number by
235 1024", "by 1024x1024", etc.
238 The value for a variable that takes a color is a list of
239 colors (at most two, one for foreground and one for background)
240 and attributes (as many as you want), separated by spaces.
242 The basic colors accepted are `normal`, `black`, `red`, `green`, `yellow`,
243 `blue`, `magenta`, `cyan` and `white`. The first color given is the
244 foreground; the second is the background.
246 Colors may also be given as numbers between 0 and 255; these use ANSI
247 256-color mode (but note that not all terminals may support this). If
248 your terminal supports it, you may also specify 24-bit RGB values as
251 The accepted attributes are `bold`, `dim`, `ul`, `blink`, `reverse`,
252 `italic`, and `strike` (for crossed-out or "strikethrough" letters).
253 The position of any attributes with respect to the colors
254 (before, after, or in between), doesn't matter. Specific attributes may
255 be turned off by prefixing them with `no` or `no-` (e.g., `noreverse`,
258 An empty color string produces no color effect at all. This can be used
259 to avoid coloring specific elements without disabling color entirely.
261 For git's pre-defined color slots, the attributes are meant to be reset
262 at the beginning of each item in the colored output. So setting
263 `color.decorate.branch` to `black` will paint that branch name in a
264 plain `black`, even if the previous thing on the same output line (e.g.
265 opening parenthesis before the list of branch names in `log --decorate`
266 output) is set to be painted with `bold` or some other attribute.
267 However, custom log formats may do more complicated and layered
268 coloring, and the negated forms may be useful there.
271 A variable that takes a pathname value can be given a
272 string that begins with "`~/`" or "`~user/`", and the usual
273 tilde expansion happens to such a string: `~/`
274 is expanded to the value of `$HOME`, and `~user/` to the
275 specified user's home directory.
281 Note that this list is non-comprehensive and not necessarily complete.
282 For command-specific variables, you will find a more detailed description
283 in the appropriate manual page.
285 Other git-related tools may and do use their own variables. When
286 inventing new variables for use in your own tool, make sure their
287 names do not conflict with those that are used by Git itself and
288 other popular tools, and describe them in your documentation.
292 These variables control various optional help messages designed to
293 aid new users. All 'advice.*' variables default to 'true', and you
294 can tell Git that you do not need help by setting these to 'false':
298 Set this variable to 'false' if you want to disable
300 'pushNonFFMatching', 'pushAlreadyExists',
301 'pushFetchFirst', and 'pushNeedsForce'
304 Advice shown when linkgit:git-push[1] fails due to a
305 non-fast-forward update to the current branch.
307 Advice shown when you ran linkgit:git-push[1] and pushed
308 'matching refs' explicitly (i.e. you used ':', or
309 specified a refspec that isn't your current branch) and
310 it resulted in a non-fast-forward error.
312 Shown when linkgit:git-push[1] rejects an update that
313 does not qualify for fast-forwarding (e.g., a tag.)
315 Shown when linkgit:git-push[1] rejects an update that
316 tries to overwrite a remote ref that points at an
317 object we do not have.
319 Shown when linkgit:git-push[1] rejects an update that
320 tries to overwrite a remote ref that points at an
321 object that is not a commit-ish, or make the remote
322 ref point at an object that is not a commit-ish.
324 Show directions on how to proceed from the current
325 state in the output of linkgit:git-status[1], in
326 the template shown when writing commit messages in
327 linkgit:git-commit[1], and in the help message shown
328 by linkgit:git-checkout[1] when switching branch.
330 Advise to consider using the `-u` option to linkgit:git-status[1]
331 when the command takes more than 2 seconds to enumerate untracked
334 Advice shown when linkgit:git-merge[1] refuses to
335 merge to avoid overwriting local changes.
337 Advice shown by various commands when conflicts
338 prevent the operation from being performed.
340 Advice on how to set your identity configuration when
341 your information is guessed from the system username and
344 Advice shown when you used linkgit:git-checkout[1] to
345 move to the detach HEAD state, to instruct how to create
346 a local branch after the fact.
348 Advice that shows the location of the patch file when
349 linkgit:git-am[1] fails to apply it.
351 In case of failure in the output of linkgit:git-rm[1],
352 show directions on how to proceed from the current state.
354 Advice on what to do when you've accidentally added one
355 git repo inside of another.
357 Advice shown if an hook is ignored because the hook is not
360 Print a message to the terminal whenever Git is waiting for
361 editor input from the user.
365 Tells Git if the executable bit of files in the working tree
368 Some filesystems lose the executable bit when a file that is
369 marked as executable is checked out, or checks out a
370 non-executable file with executable bit on.
371 linkgit:git-clone[1] or linkgit:git-init[1] probe the filesystem
372 to see if it handles the executable bit correctly
373 and this variable is automatically set as necessary.
375 A repository, however, may be on a filesystem that handles
376 the filemode correctly, and this variable is set to 'true'
377 when created, but later may be made accessible from another
378 environment that loses the filemode (e.g. exporting ext4 via
379 CIFS mount, visiting a Cygwin created repository with
380 Git for Windows or Eclipse).
381 In such a case it may be necessary to set this variable to 'false'.
382 See linkgit:git-update-index[1].
384 The default is true (when core.filemode is not specified in the config file).
387 (Windows-only) If true, mark newly-created directories and files whose
388 name starts with a dot as hidden. If 'dotGitOnly', only the `.git/`
389 directory is hidden, but no other files starting with a dot. The
390 default mode is 'dotGitOnly'.
393 If true, this option enables various workarounds to enable
394 Git to work better on filesystems that are not case sensitive,
395 like FAT. For example, if a directory listing finds
396 "makefile" when Git expects "Makefile", Git will assume
397 it is really the same file, and continue to remember it as
400 The default is false, except linkgit:git-clone[1] or linkgit:git-init[1]
401 will probe and set core.ignoreCase true if appropriate when the repository
404 core.precomposeUnicode::
405 This option is only used by Mac OS implementation of Git.
406 When core.precomposeUnicode=true, Git reverts the unicode decomposition
407 of filenames done by Mac OS. This is useful when sharing a repository
408 between Mac OS and Linux or Windows.
409 (Git for Windows 1.7.10 or higher is needed, or Git under cygwin 1.7).
410 When false, file names are handled fully transparent by Git,
411 which is backward compatible with older versions of Git.
414 If set to true, do not allow checkout of paths that would
415 be considered equivalent to `.git` on an HFS+ filesystem.
416 Defaults to `true` on Mac OS, and `false` elsewhere.
419 If set to true, do not allow checkout of paths that would
420 cause problems with the NTFS filesystem, e.g. conflict with
422 Defaults to `true` on Windows, and `false` elsewhere.
425 If set, the value of this variable is used as a command which
426 will identify all files that may have changed since the
427 requested date/time. This information is used to speed up git by
428 avoiding unnecessary processing of files that have not changed.
429 See the "fsmonitor-watchman" section of linkgit:githooks[5].
432 If false, the ctime differences between the index and the
433 working tree are ignored; useful when the inode change time
434 is regularly modified by something outside Git (file system
435 crawlers and some backup systems).
436 See linkgit:git-update-index[1]. True by default.
439 If true, the split-index feature of the index will be used.
440 See linkgit:git-update-index[1]. False by default.
442 core.untrackedCache::
443 Determines what to do about the untracked cache feature of the
444 index. It will be kept, if this variable is unset or set to
445 `keep`. It will automatically be added if set to `true`. And
446 it will automatically be removed, if set to `false`. Before
447 setting it to `true`, you should check that mtime is working
448 properly on your system.
449 See linkgit:git-update-index[1]. `keep` by default.
452 Determines which stat fields to match between the index
453 and work tree. The user can set this to 'default' or
454 'minimal'. Default (or explicitly 'default'), is to check
455 all fields, including the sub-second part of mtime and ctime.
458 Commands that output paths (e.g. 'ls-files', 'diff'), will
459 quote "unusual" characters in the pathname by enclosing the
460 pathname in double-quotes and escaping those characters with
461 backslashes in the same way C escapes control characters (e.g.
462 `\t` for TAB, `\n` for LF, `\\` for backslash) or bytes with
463 values larger than 0x80 (e.g. octal `\302\265` for "micro" in
464 UTF-8). If this variable is set to false, bytes higher than
465 0x80 are not considered "unusual" any more. Double-quotes,
466 backslash and control characters are always escaped regardless
467 of the setting of this variable. A simple space character is
468 not considered "unusual". Many commands can output pathnames
469 completely verbatim using the `-z` option. The default value
473 Sets the line ending type to use in the working directory for
474 files that have the `text` property set when core.autocrlf is false.
475 Alternatives are 'lf', 'crlf' and 'native', which uses the platform's
476 native line ending. The default value is `native`. See
477 linkgit:gitattributes[5] for more information on end-of-line
481 If true, makes Git check if converting `CRLF` is reversible when
482 end-of-line conversion is active. Git will verify if a command
483 modifies a file in the work tree either directly or indirectly.
484 For example, committing a file followed by checking out the
485 same file should yield the original file in the work tree. If
486 this is not the case for the current setting of
487 `core.autocrlf`, Git will reject the file. The variable can
488 be set to "warn", in which case Git will only warn about an
489 irreversible conversion but continue the operation.
491 CRLF conversion bears a slight chance of corrupting data.
492 When it is enabled, Git will convert CRLF to LF during commit and LF to
493 CRLF during checkout. A file that contains a mixture of LF and
494 CRLF before the commit cannot be recreated by Git. For text
495 files this is the right thing to do: it corrects line endings
496 such that we have only LF line endings in the repository.
497 But for binary files that are accidentally classified as text the
498 conversion can corrupt data.
500 If you recognize such corruption early you can easily fix it by
501 setting the conversion type explicitly in .gitattributes. Right
502 after committing you still have the original file in your work
503 tree and this file is not yet corrupted. You can explicitly tell
504 Git that this file is binary and Git will handle the file
507 Unfortunately, the desired effect of cleaning up text files with
508 mixed line endings and the undesired effect of corrupting binary
509 files cannot be distinguished. In both cases CRLFs are removed
510 in an irreversible way. For text files this is the right thing
511 to do because CRLFs are line endings, while for binary files
512 converting CRLFs corrupts data.
514 Note, this safety check does not mean that a checkout will generate a
515 file identical to the original file for a different setting of
516 `core.eol` and `core.autocrlf`, but only for the current one. For
517 example, a text file with `LF` would be accepted with `core.eol=lf`
518 and could later be checked out with `core.eol=crlf`, in which case the
519 resulting file would contain `CRLF`, although the original file
520 contained `LF`. However, in both work trees the line endings would be
521 consistent, that is either all `LF` or all `CRLF`, but never mixed. A
522 file with mixed line endings would be reported by the `core.safecrlf`
526 Setting this variable to "true" is the same as setting
527 the `text` attribute to "auto" on all files and core.eol to "crlf".
528 Set to true if you want to have `CRLF` line endings in your
529 working directory and the repository has LF line endings.
530 This variable can be set to 'input',
531 in which case no output conversion is performed.
533 core.checkRoundtripEncoding::
534 A comma and/or whitespace separated list of encodings that Git
535 performs UTF-8 round trip checks on if they are used in an
536 `working-tree-encoding` attribute (see linkgit:gitattributes[5]).
537 The default value is `SHIFT-JIS`.
540 If false, symbolic links are checked out as small plain files that
541 contain the link text. linkgit:git-update-index[1] and
542 linkgit:git-add[1] will not change the recorded type to regular
543 file. Useful on filesystems like FAT that do not support
546 The default is true, except linkgit:git-clone[1] or linkgit:git-init[1]
547 will probe and set core.symlinks false if appropriate when the repository
551 A "proxy command" to execute (as 'command host port') instead
552 of establishing direct connection to the remote server when
553 using the Git protocol for fetching. If the variable value is
554 in the "COMMAND for DOMAIN" format, the command is applied only
555 on hostnames ending with the specified domain string. This variable
556 may be set multiple times and is matched in the given order;
557 the first match wins.
559 Can be overridden by the `GIT_PROXY_COMMAND` environment variable
560 (which always applies universally, without the special "for"
563 The special string `none` can be used as the proxy command to
564 specify that no proxy be used for a given domain pattern.
565 This is useful for excluding servers inside a firewall from
566 proxy use, while defaulting to a common proxy for external domains.
569 If this variable is set, `git fetch` and `git push` will
570 use the specified command instead of `ssh` when they need to
571 connect to a remote system. The command is in the same form as
572 the `GIT_SSH_COMMAND` environment variable and is overridden
573 when the environment variable is set.
576 If true, Git will avoid using lstat() calls to detect if files have
577 changed by setting the "assume-unchanged" bit for those tracked files
578 which it has updated identically in both the index and working tree.
580 When files are modified outside of Git, the user will need to stage
581 the modified files explicitly (e.g. see 'Examples' section in
582 linkgit:git-update-index[1]).
583 Git will not normally detect changes to those files.
585 This is useful on systems where lstat() calls are very slow, such as
586 CIFS/Microsoft Windows.
590 core.preferSymlinkRefs::
591 Instead of the default "symref" format for HEAD
592 and other symbolic reference files, use symbolic links.
593 This is sometimes needed to work with old scripts that
594 expect HEAD to be a symbolic link.
597 If true this repository is assumed to be 'bare' and has no
598 working directory associated with it. If this is the case a
599 number of commands that require a working directory will be
600 disabled, such as linkgit:git-add[1] or linkgit:git-merge[1].
602 This setting is automatically guessed by linkgit:git-clone[1] or
603 linkgit:git-init[1] when the repository was created. By default a
604 repository that ends in "/.git" is assumed to be not bare (bare =
605 false), while all other repositories are assumed to be bare (bare
609 Set the path to the root of the working tree.
610 If `GIT_COMMON_DIR` environment variable is set, core.worktree
611 is ignored and not used for determining the root of working tree.
612 This can be overridden by the `GIT_WORK_TREE` environment
613 variable and the `--work-tree` command-line option.
614 The value can be an absolute path or relative to the path to
615 the .git directory, which is either specified by --git-dir
616 or GIT_DIR, or automatically discovered.
617 If --git-dir or GIT_DIR is specified but none of
618 --work-tree, GIT_WORK_TREE and core.worktree is specified,
619 the current working directory is regarded as the top level
620 of your working tree.
622 Note that this variable is honored even when set in a configuration
623 file in a ".git" subdirectory of a directory and its value differs
624 from the latter directory (e.g. "/path/to/.git/config" has
625 core.worktree set to "/different/path"), which is most likely a
626 misconfiguration. Running Git commands in the "/path/to" directory will
627 still use "/different/path" as the root of the work tree and can cause
628 confusion unless you know what you are doing (e.g. you are creating a
629 read-only snapshot of the same index to a location different from the
630 repository's usual working tree).
632 core.logAllRefUpdates::
633 Enable the reflog. Updates to a ref <ref> is logged to the file
634 "`$GIT_DIR/logs/<ref>`", by appending the new and old
635 SHA-1, the date/time and the reason of the update, but
636 only when the file exists. If this configuration
637 variable is set to `true`, missing "`$GIT_DIR/logs/<ref>`"
638 file is automatically created for branch heads (i.e. under
639 `refs/heads/`), remote refs (i.e. under `refs/remotes/`),
640 note refs (i.e. under `refs/notes/`), and the symbolic ref `HEAD`.
641 If it is set to `always`, then a missing reflog is automatically
642 created for any ref under `refs/`.
644 This information can be used to determine what commit
645 was the tip of a branch "2 days ago".
647 This value is true by default in a repository that has
648 a working directory associated with it, and false by
649 default in a bare repository.
651 core.repositoryFormatVersion::
652 Internal variable identifying the repository format and layout
655 core.sharedRepository::
656 When 'group' (or 'true'), the repository is made shareable between
657 several users in a group (making sure all the files and objects are
658 group-writable). When 'all' (or 'world' or 'everybody'), the
659 repository will be readable by all users, additionally to being
660 group-shareable. When 'umask' (or 'false'), Git will use permissions
661 reported by umask(2). When '0xxx', where '0xxx' is an octal number,
662 files in the repository will have this mode value. '0xxx' will override
663 user's umask value (whereas the other options will only override
664 requested parts of the user's umask value). Examples: '0660' will make
665 the repo read/write-able for the owner and group, but inaccessible to
666 others (equivalent to 'group' unless umask is e.g. '0022'). '0640' is a
667 repository that is group-readable but not group-writable.
668 See linkgit:git-init[1]. False by default.
670 core.warnAmbiguousRefs::
671 If true, Git will warn you if the ref name you passed it is ambiguous
672 and might match multiple refs in the repository. True by default.
675 An integer -1..9, indicating a default compression level.
676 -1 is the zlib default. 0 means no compression,
677 and 1..9 are various speed/size tradeoffs, 9 being slowest.
678 If set, this provides a default to other compression variables,
679 such as `core.looseCompression` and `pack.compression`.
681 core.looseCompression::
682 An integer -1..9, indicating the compression level for objects that
683 are not in a pack file. -1 is the zlib default. 0 means no
684 compression, and 1..9 are various speed/size tradeoffs, 9 being
685 slowest. If not set, defaults to core.compression. If that is
686 not set, defaults to 1 (best speed).
688 core.packedGitWindowSize::
689 Number of bytes of a pack file to map into memory in a
690 single mapping operation. Larger window sizes may allow
691 your system to process a smaller number of large pack files
692 more quickly. Smaller window sizes will negatively affect
693 performance due to increased calls to the operating system's
694 memory manager, but may improve performance when accessing
695 a large number of large pack files.
697 Default is 1 MiB if NO_MMAP was set at compile time, otherwise 32
698 MiB on 32 bit platforms and 1 GiB on 64 bit platforms. This should
699 be reasonable for all users/operating systems. You probably do
700 not need to adjust this value.
702 Common unit suffixes of 'k', 'm', or 'g' are supported.
704 core.packedGitLimit::
705 Maximum number of bytes to map simultaneously into memory
706 from pack files. If Git needs to access more than this many
707 bytes at once to complete an operation it will unmap existing
708 regions to reclaim virtual address space within the process.
710 Default is 256 MiB on 32 bit platforms and 32 TiB (effectively
711 unlimited) on 64 bit platforms.
712 This should be reasonable for all users/operating systems, except on
713 the largest projects. You probably do not need to adjust this value.
715 Common unit suffixes of 'k', 'm', or 'g' are supported.
717 core.deltaBaseCacheLimit::
718 Maximum number of bytes to reserve for caching base objects
719 that may be referenced by multiple deltified objects. By storing the
720 entire decompressed base objects in a cache Git is able
721 to avoid unpacking and decompressing frequently used base
722 objects multiple times.
724 Default is 96 MiB on all platforms. This should be reasonable
725 for all users/operating systems, except on the largest projects.
726 You probably do not need to adjust this value.
728 Common unit suffixes of 'k', 'm', or 'g' are supported.
730 core.bigFileThreshold::
731 Files larger than this size are stored deflated, without
732 attempting delta compression. Storing large files without
733 delta compression avoids excessive memory usage, at the
734 slight expense of increased disk usage. Additionally files
735 larger than this size are always treated as binary.
737 Default is 512 MiB on all platforms. This should be reasonable
738 for most projects as source code and other text files can still
739 be delta compressed, but larger binary media files won't be.
741 Common unit suffixes of 'k', 'm', or 'g' are supported.
744 Specifies the pathname to the file that contains patterns to
745 describe paths that are not meant to be tracked, in addition
746 to '.gitignore' (per-directory) and '.git/info/exclude'.
747 Defaults to `$XDG_CONFIG_HOME/git/ignore`.
748 If `$XDG_CONFIG_HOME` is either not set or empty, `$HOME/.config/git/ignore`
749 is used instead. See linkgit:gitignore[5].
752 Some commands (e.g. svn and http interfaces) that interactively
753 ask for a password can be told to use an external program given
754 via the value of this variable. Can be overridden by the `GIT_ASKPASS`
755 environment variable. If not set, fall back to the value of the
756 `SSH_ASKPASS` environment variable or, failing that, a simple password
757 prompt. The external program shall be given a suitable prompt as
758 command-line argument and write the password on its STDOUT.
760 core.attributesFile::
761 In addition to '.gitattributes' (per-directory) and
762 '.git/info/attributes', Git looks into this file for attributes
763 (see linkgit:gitattributes[5]). Path expansions are made the same
764 way as for `core.excludesFile`. Its default value is
765 `$XDG_CONFIG_HOME/git/attributes`. If `$XDG_CONFIG_HOME` is either not
766 set or empty, `$HOME/.config/git/attributes` is used instead.
769 By default Git will look for your hooks in the
770 '$GIT_DIR/hooks' directory. Set this to different path,
771 e.g. '/etc/git/hooks', and Git will try to find your hooks in
772 that directory, e.g. '/etc/git/hooks/pre-receive' instead of
773 in '$GIT_DIR/hooks/pre-receive'.
775 The path can be either absolute or relative. A relative path is
776 taken as relative to the directory where the hooks are run (see
777 the "DESCRIPTION" section of linkgit:githooks[5]).
779 This configuration variable is useful in cases where you'd like to
780 centrally configure your Git hooks instead of configuring them on a
781 per-repository basis, or as a more flexible and centralized
782 alternative to having an `init.templateDir` where you've changed
786 Commands such as `commit` and `tag` that let you edit
787 messages by launching an editor use the value of this
788 variable when it is set, and the environment variable
789 `GIT_EDITOR` is not set. See linkgit:git-var[1].
792 Commands such as `commit` and `tag` that let you edit
793 messages consider a line that begins with this character
794 commented, and removes them after the editor returns
797 If set to "auto", `git-commit` would select a character that is not
798 the beginning character of any line in existing commit messages.
800 core.filesRefLockTimeout::
801 The length of time, in milliseconds, to retry when trying to
802 lock an individual reference. Value 0 means not to retry at
803 all; -1 means to try indefinitely. Default is 100 (i.e.,
806 core.packedRefsTimeout::
807 The length of time, in milliseconds, to retry when trying to
808 lock the `packed-refs` file. Value 0 means not to retry at
809 all; -1 means to try indefinitely. Default is 1000 (i.e.,
813 Text editor used by `git rebase -i` for editing the rebase instruction file.
814 The value is meant to be interpreted by the shell when it is used.
815 It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable.
816 When not configured the default commit message editor is used instead.
819 Text viewer for use by Git commands (e.g., 'less'). The value
820 is meant to be interpreted by the shell. The order of preference
821 is the `$GIT_PAGER` environment variable, then `core.pager`
822 configuration, then `$PAGER`, and then the default chosen at
823 compile time (usually 'less').
825 When the `LESS` environment variable is unset, Git sets it to `FRX`
826 (if `LESS` environment variable is set, Git does not change it at
827 all). If you want to selectively override Git's default setting
828 for `LESS`, you can set `core.pager` to e.g. `less -S`. This will
829 be passed to the shell by Git, which will translate the final
830 command to `LESS=FRX less -S`. The environment does not set the
831 `S` option but the command line does, instructing less to truncate
832 long lines. Similarly, setting `core.pager` to `less -+F` will
833 deactivate the `F` option specified by the environment from the
834 command-line, deactivating the "quit if one screen" behavior of
835 `less`. One can specifically activate some flags for particular
836 commands: for example, setting `pager.blame` to `less -S` enables
837 line truncation only for `git blame`.
839 Likewise, when the `LV` environment variable is unset, Git sets it
840 to `-c`. You can override this setting by exporting `LV` with
841 another value or setting `core.pager` to `lv +c`.
844 A comma separated list of common whitespace problems to
845 notice. 'git diff' will use `color.diff.whitespace` to
846 highlight them, and 'git apply --whitespace=error' will
847 consider them as errors. You can prefix `-` to disable
848 any of them (e.g. `-trailing-space`):
850 * `blank-at-eol` treats trailing whitespaces at the end of the line
851 as an error (enabled by default).
852 * `space-before-tab` treats a space character that appears immediately
853 before a tab character in the initial indent part of the line as an
854 error (enabled by default).
855 * `indent-with-non-tab` treats a line that is indented with space
856 characters instead of the equivalent tabs as an error (not enabled by
858 * `tab-in-indent` treats a tab character in the initial indent part of
859 the line as an error (not enabled by default).
860 * `blank-at-eof` treats blank lines added at the end of file as an error
861 (enabled by default).
862 * `trailing-space` is a short-hand to cover both `blank-at-eol` and
864 * `cr-at-eol` treats a carriage-return at the end of line as
865 part of the line terminator, i.e. with it, `trailing-space`
866 does not trigger if the character before such a carriage-return
867 is not a whitespace (not enabled by default).
868 * `tabwidth=<n>` tells how many character positions a tab occupies; this
869 is relevant for `indent-with-non-tab` and when Git fixes `tab-in-indent`
870 errors. The default tab width is 8. Allowed values are 1 to 63.
872 core.fsyncObjectFiles::
873 This boolean will enable 'fsync()' when writing object files.
875 This is a total waste of time and effort on a filesystem that orders
876 data writes properly, but can be useful for filesystems that do not use
877 journalling (traditional UNIX filesystems) or that only journal metadata
878 and not file contents (OS X's HFS+, or Linux ext3 with "data=writeback").
881 Enable parallel index preload for operations like 'git diff'
883 This can speed up operations like 'git diff' and 'git status' especially
884 on filesystems like NFS that have weak caching semantics and thus
885 relatively high IO latencies. When enabled, Git will do the
886 index comparison to the filesystem data in parallel, allowing
887 overlapping IO's. Defaults to true.
890 You can set this to 'link', in which case a hardlink followed by
891 a delete of the source are used to make sure that object creation
892 will not overwrite existing objects.
894 On some file system/operating system combinations, this is unreliable.
895 Set this config setting to 'rename' there; However, This will remove the
896 check that makes sure that existing object files will not get overwritten.
899 When showing commit messages, also show notes which are stored in
900 the given ref. The ref must be fully qualified. If the given
901 ref does not exist, it is not an error but means that no
902 notes should be printed.
904 This setting defaults to "refs/notes/commits", and it can be overridden by
905 the `GIT_NOTES_REF` environment variable. See linkgit:git-notes[1].
908 Enable git commit graph feature. Allows reading from the
911 core.sparseCheckout::
912 Enable "sparse checkout" feature. See section "Sparse checkout" in
913 linkgit:git-read-tree[1] for more information.
916 Set the length object names are abbreviated to. If
917 unspecified or set to "auto", an appropriate value is
918 computed based on the approximate number of packed objects
919 in your repository, which hopefully is enough for
920 abbreviated object names to stay unique for some time.
921 The minimum length is 4.
924 add.ignore-errors (deprecated)::
925 Tells 'git add' to continue adding files when some files cannot be
926 added due to indexing errors. Equivalent to the `--ignore-errors`
927 option of linkgit:git-add[1]. `add.ignore-errors` is deprecated,
928 as it does not follow the usual naming convention for configuration
932 Command aliases for the linkgit:git[1] command wrapper - e.g.
933 after defining "alias.last = cat-file commit HEAD", the invocation
934 "git last" is equivalent to "git cat-file commit HEAD". To avoid
935 confusion and troubles with script usage, aliases that
936 hide existing Git commands are ignored. Arguments are split by
937 spaces, the usual shell quoting and escaping is supported.
938 A quote pair or a backslash can be used to quote them.
940 If the alias expansion is prefixed with an exclamation point,
941 it will be treated as a shell command. For example, defining
942 "alias.new = !gitk --all --not ORIG_HEAD", the invocation
943 "git new" is equivalent to running the shell command
944 "gitk --all --not ORIG_HEAD". Note that shell commands will be
945 executed from the top-level directory of a repository, which may
946 not necessarily be the current directory.
947 `GIT_PREFIX` is set as returned by running 'git rev-parse --show-prefix'
948 from the original current directory. See linkgit:git-rev-parse[1].
951 If true, git-am will call git-mailsplit for patches in mbox format
952 with parameter `--keep-cr`. In this case git-mailsplit will
953 not remove `\r` from lines ending with `\r\n`. Can be overridden
954 by giving `--no-keep-cr` from the command line.
955 See linkgit:git-am[1], linkgit:git-mailsplit[1].
958 By default, `git am` will fail if the patch does not apply cleanly. When
959 set to true, this setting tells `git am` to fall back on 3-way merge if
960 the patch records the identity of blobs it is supposed to apply to and
961 we have those blobs available locally (equivalent to giving the `--3way`
962 option from the command line). Defaults to `false`.
963 See linkgit:git-am[1].
965 apply.ignoreWhitespace::
966 When set to 'change', tells 'git apply' to ignore changes in
967 whitespace, in the same way as the `--ignore-space-change`
969 When set to one of: no, none, never, false tells 'git apply' to
970 respect all whitespace differences.
971 See linkgit:git-apply[1].
974 Tells 'git apply' how to handle whitespaces, in the same way
975 as the `--whitespace` option. See linkgit:git-apply[1].
978 Do not treat root commits as boundaries in linkgit:git-blame[1].
979 This option defaults to false.
981 blame.blankBoundary::
982 Show blank commit object name for boundary commits in
983 linkgit:git-blame[1]. This option defaults to false.
986 Show the author email instead of author name in linkgit:git-blame[1].
987 This option defaults to false.
990 Specifies the format used to output dates in linkgit:git-blame[1].
991 If unset the iso format is used. For supported values,
992 see the discussion of the `--date` option at linkgit:git-log[1].
994 branch.autoSetupMerge::
995 Tells 'git branch' and 'git checkout' to set up new branches
996 so that linkgit:git-pull[1] will appropriately merge from the
997 starting point branch. Note that even if this option is not set,
998 this behavior can be chosen per-branch using the `--track`
999 and `--no-track` options. The valid settings are: `false` -- no
1000 automatic setup is done; `true` -- automatic setup is done when the
1001 starting point is a remote-tracking branch; `always` --
1002 automatic setup is done when the starting point is either a
1003 local branch or remote-tracking
1004 branch. This option defaults to true.
1006 branch.autoSetupRebase::
1007 When a new branch is created with 'git branch' or 'git checkout'
1008 that tracks another branch, this variable tells Git to set
1009 up pull to rebase instead of merge (see "branch.<name>.rebase").
1010 When `never`, rebase is never automatically set to true.
1011 When `local`, rebase is set to true for tracked branches of
1012 other local branches.
1013 When `remote`, rebase is set to true for tracked branches of
1014 remote-tracking branches.
1015 When `always`, rebase will be set to true for all tracking
1017 See "branch.autoSetupMerge" for details on how to set up a
1018 branch to track another branch.
1019 This option defaults to never.
1021 branch.<name>.remote::
1022 When on branch <name>, it tells 'git fetch' and 'git push'
1023 which remote to fetch from/push to. The remote to push to
1024 may be overridden with `remote.pushDefault` (for all branches).
1025 The remote to push to, for the current branch, may be further
1026 overridden by `branch.<name>.pushRemote`. If no remote is
1027 configured, or if you are not on any branch, it defaults to
1028 `origin` for fetching and `remote.pushDefault` for pushing.
1029 Additionally, `.` (a period) is the current local repository
1030 (a dot-repository), see `branch.<name>.merge`'s final note below.
1032 branch.<name>.pushRemote::
1033 When on branch <name>, it overrides `branch.<name>.remote` for
1034 pushing. It also overrides `remote.pushDefault` for pushing
1035 from branch <name>. When you pull from one place (e.g. your
1036 upstream) and push to another place (e.g. your own publishing
1037 repository), you would want to set `remote.pushDefault` to
1038 specify the remote to push to for all branches, and use this
1039 option to override it for a specific branch.
1041 branch.<name>.merge::
1042 Defines, together with branch.<name>.remote, the upstream branch
1043 for the given branch. It tells 'git fetch'/'git pull'/'git rebase' which
1044 branch to merge and can also affect 'git push' (see push.default).
1045 When in branch <name>, it tells 'git fetch' the default
1046 refspec to be marked for merging in FETCH_HEAD. The value is
1047 handled like the remote part of a refspec, and must match a
1048 ref which is fetched from the remote given by
1049 "branch.<name>.remote".
1050 The merge information is used by 'git pull' (which at first calls
1051 'git fetch') to lookup the default branch for merging. Without
1052 this option, 'git pull' defaults to merge the first refspec fetched.
1053 Specify multiple values to get an octopus merge.
1054 If you wish to setup 'git pull' so that it merges into <name> from
1055 another branch in the local repository, you can point
1056 branch.<name>.merge to the desired branch, and use the relative path
1057 setting `.` (a period) for branch.<name>.remote.
1059 branch.<name>.mergeOptions::
1060 Sets default options for merging into branch <name>. The syntax and
1061 supported options are the same as those of linkgit:git-merge[1], but
1062 option values containing whitespace characters are currently not
1065 branch.<name>.rebase::
1066 When true, rebase the branch <name> on top of the fetched branch,
1067 instead of merging the default branch from the default remote when
1068 "git pull" is run. See "pull.rebase" for doing this in a non
1069 branch-specific manner.
1071 When `merges`, pass the `--rebase-merges` option to 'git rebase'
1072 so that the local merge commits are included in the rebase (see
1073 linkgit:git-rebase[1] for details).
1075 When preserve, also pass `--preserve-merges` along to 'git rebase'
1076 so that locally committed merge commits will not be flattened
1077 by running 'git pull'.
1079 When the value is `interactive`, the rebase is run in interactive mode.
1081 *NOTE*: this is a possibly dangerous operation; do *not* use
1082 it unless you understand the implications (see linkgit:git-rebase[1]
1085 branch.<name>.description::
1086 Branch description, can be edited with
1087 `git branch --edit-description`. Branch description is
1088 automatically added in the format-patch cover letter or
1089 request-pull summary.
1091 browser.<tool>.cmd::
1092 Specify the command to invoke the specified browser. The
1093 specified command is evaluated in shell with the URLs passed
1094 as arguments. (See linkgit:git-web{litdd}browse[1].)
1096 browser.<tool>.path::
1097 Override the path for the given tool that may be used to
1098 browse HTML help (see `-w` option in linkgit:git-help[1]) or a
1099 working repository in gitweb (see linkgit:git-instaweb[1]).
1101 clean.requireForce::
1102 A boolean to make git-clean do nothing unless given -f,
1103 -i or -n. Defaults to true.
1106 A boolean to enable/disable color in hints (e.g. when a push
1107 failed, see `advice.*` for a list). May be set to `always`,
1108 `false` (or `never`) or `auto` (or `true`), in which case colors
1109 are used only when the error output goes to a terminal. If
1110 unset, then the value of `color.ui` is used (`auto` by default).
1113 Use customized color for hints.
1116 A boolean to enable/disable color in the output of
1117 linkgit:git-branch[1]. May be set to `always`,
1118 `false` (or `never`) or `auto` (or `true`), in which case colors are used
1119 only when the output is to a terminal. If unset, then the
1120 value of `color.ui` is used (`auto` by default).
1122 color.branch.<slot>::
1123 Use customized color for branch coloration. `<slot>` is one of
1124 `current` (the current branch), `local` (a local branch),
1125 `remote` (a remote-tracking branch in refs/remotes/),
1126 `upstream` (upstream tracking branch), `plain` (other
1130 Whether to use ANSI escape sequences to add color to patches.
1131 If this is set to `always`, linkgit:git-diff[1],
1132 linkgit:git-log[1], and linkgit:git-show[1] will use color
1133 for all patches. If it is set to `true` or `auto`, those
1134 commands will only use color when output is to the terminal.
1135 If unset, then the value of `color.ui` is used (`auto` by
1138 This does not affect linkgit:git-format-patch[1] or the
1139 'git-diff-{asterisk}' plumbing commands. Can be overridden on the
1140 command line with the `--color[=<when>]` option.
1143 If set to either a valid `<mode>` or a true value, moved lines
1144 in a diff are colored differently, for details of valid modes
1145 see '--color-moved' in linkgit:git-diff[1]. If simply set to
1146 true the default color mode will be used. When set to false,
1147 moved lines are not colored.
1150 Use customized color for diff colorization. `<slot>` specifies
1151 which part of the patch to use the specified color, and is one
1152 of `context` (context text - `plain` is a historical synonym),
1153 `meta` (metainformation), `frag`
1154 (hunk header), 'func' (function in hunk header), `old` (removed lines),
1155 `new` (added lines), `commit` (commit headers), `whitespace`
1156 (highlighting whitespace errors), `oldMoved` (deleted lines),
1157 `newMoved` (added lines), `oldMovedDimmed`, `oldMovedAlternative`,
1158 `oldMovedAlternativeDimmed`, `newMovedDimmed`, `newMovedAlternative`
1159 and `newMovedAlternativeDimmed` (See the '<mode>'
1160 setting of '--color-moved' in linkgit:git-diff[1] for details).
1162 color.decorate.<slot>::
1163 Use customized color for 'git log --decorate' output. `<slot>` is one
1164 of `branch`, `remoteBranch`, `tag`, `stash` or `HEAD` for local
1165 branches, remote-tracking branches, tags, stash and HEAD, respectively.
1168 When set to `always`, always highlight matches. When `false` (or
1169 `never`), never. When set to `true` or `auto`, use color only
1170 when the output is written to the terminal. If unset, then the
1171 value of `color.ui` is used (`auto` by default).
1174 Use customized color for grep colorization. `<slot>` specifies which
1175 part of the line to use the specified color, and is one of
1179 non-matching text in context lines (when using `-A`, `-B`, or `-C`)
1181 filename prefix (when not using `-h`)
1183 function name lines (when using `-p`)
1185 line number prefix (when using `-n`)
1187 matching text (same as setting `matchContext` and `matchSelected`)
1189 matching text in context lines
1191 matching text in selected lines
1193 non-matching text in selected lines
1195 separators between fields on a line (`:`, `-`, and `=`)
1196 and between hunks (`--`)
1200 When set to `always`, always use colors for interactive prompts
1201 and displays (such as those used by "git-add --interactive" and
1202 "git-clean --interactive"). When false (or `never`), never.
1203 When set to `true` or `auto`, use colors only when the output is
1204 to the terminal. If unset, then the value of `color.ui` is
1205 used (`auto` by default).
1207 color.interactive.<slot>::
1208 Use customized color for 'git add --interactive' and 'git clean
1209 --interactive' output. `<slot>` may be `prompt`, `header`, `help`
1210 or `error`, for four distinct types of normal output from
1211 interactive commands.
1214 A boolean to enable/disable colored output when the pager is in
1215 use (default is true).
1218 A boolean to enable/disable color in push errors. May be set to
1219 `always`, `false` (or `never`) or `auto` (or `true`), in which
1220 case colors are used only when the error output goes to a terminal.
1221 If unset, then the value of `color.ui` is used (`auto` by default).
1224 Use customized color for push errors.
1227 A boolean to enable/disable color in the output of
1228 linkgit:git-show-branch[1]. May be set to `always`,
1229 `false` (or `never`) or `auto` (or `true`), in which case colors are used
1230 only when the output is to a terminal. If unset, then the
1231 value of `color.ui` is used (`auto` by default).
1234 A boolean to enable/disable color in the output of
1235 linkgit:git-status[1]. May be set to `always`,
1236 `false` (or `never`) or `auto` (or `true`), in which case colors are used
1237 only when the output is to a terminal. If unset, then the
1238 value of `color.ui` is used (`auto` by default).
1240 color.status.<slot>::
1241 Use customized color for status colorization. `<slot>` is
1242 one of `header` (the header text of the status message),
1243 `added` or `updated` (files which are added but not committed),
1244 `changed` (files which are changed but not added in the index),
1245 `untracked` (files which are not tracked by Git),
1246 `branch` (the current branch),
1247 `nobranch` (the color the 'no branch' warning is shown in, defaulting
1249 `localBranch` or `remoteBranch` (the local and remote branch names,
1250 respectively, when branch and tracking information is displayed in the
1251 status short-format), or
1252 `unmerged` (files which have unmerged changes).
1255 A boolean to enable/disable color when pushes are rejected. May be
1256 set to `always`, `false` (or `never`) or `auto` (or `true`), in which
1257 case colors are used only when the error output goes to a terminal.
1258 If unset, then the value of `color.ui` is used (`auto` by default).
1260 color.transport.rejected::
1261 Use customized color when a push was rejected.
1264 This variable determines the default value for variables such
1265 as `color.diff` and `color.grep` that control the use of color
1266 per command family. Its scope will expand as more commands learn
1267 configuration to set a default for the `--color` option. Set it
1268 to `false` or `never` if you prefer Git commands not to use
1269 color unless enabled explicitly with some other configuration
1270 or the `--color` option. Set it to `always` if you want all
1271 output not intended for machine consumption to use color, to
1272 `true` or `auto` (this is the default since Git 1.8.4) if you
1273 want such output to use color when written to the terminal.
1276 Specify whether supported commands should output in columns.
1277 This variable consists of a list of tokens separated by spaces
1280 These options control when the feature should be enabled
1281 (defaults to 'never'):
1285 always show in columns
1287 never show in columns
1289 show in columns if the output is to the terminal
1292 These options control layout (defaults to 'column'). Setting any
1293 of these implies 'always' if none of 'always', 'never', or 'auto' are
1298 fill columns before rows
1300 fill rows before columns
1305 Finally, these options can be combined with a layout option (defaults
1310 make unequal size columns to utilize more space
1312 make equal size columns
1316 Specify whether to output branch listing in `git branch` in columns.
1317 See `column.ui` for details.
1320 Specify the layout when list items in `git clean -i`, which always
1321 shows files and directories in columns. See `column.ui` for details.
1324 Specify whether to output untracked files in `git status` in columns.
1325 See `column.ui` for details.
1328 Specify whether to output tag listing in `git tag` in columns.
1329 See `column.ui` for details.
1332 This setting overrides the default of the `--cleanup` option in
1333 `git commit`. See linkgit:git-commit[1] for details. Changing the
1334 default can be useful when you always want to keep lines that begin
1335 with comment character `#` in your log message, in which case you
1336 would do `git config commit.cleanup whitespace` (note that you will
1337 have to remove the help lines that begin with `#` in the commit log
1338 template yourself, if you do this).
1342 A boolean to specify whether all commits should be GPG signed.
1343 Use of this option when doing operations such as rebase can
1344 result in a large number of commits being signed. It may be
1345 convenient to use an agent to avoid typing your GPG passphrase
1349 A boolean to enable/disable inclusion of status information in the
1350 commit message template when using an editor to prepare the commit
1351 message. Defaults to true.
1354 Specify the pathname of a file to use as the template for
1355 new commit messages.
1358 A boolean or int to specify the level of verbose with `git commit`.
1359 See linkgit:git-commit[1].
1362 Specify an external helper to be called when a username or
1363 password credential is needed; the helper may consult external
1364 storage to avoid prompting the user for the credentials. Note
1365 that multiple helpers may be defined. See linkgit:gitcredentials[7]
1368 credential.useHttpPath::
1369 When acquiring credentials, consider the "path" component of an http
1370 or https URL to be important. Defaults to false. See
1371 linkgit:gitcredentials[7] for more information.
1373 credential.username::
1374 If no username is set for a network authentication, use this username
1375 by default. See credential.<context>.* below, and
1376 linkgit:gitcredentials[7].
1378 credential.<url>.*::
1379 Any of the credential.* options above can be applied selectively to
1380 some credentials. For example "credential.https://example.com.username"
1381 would set the default username only for https connections to
1382 example.com. See linkgit:gitcredentials[7] for details on how URLs are
1385 credentialCache.ignoreSIGHUP::
1386 Tell git-credential-cache--daemon to ignore SIGHUP, instead of quitting.
1388 include::diff-config.txt[]
1390 difftool.<tool>.path::
1391 Override the path for the given tool. This is useful in case
1392 your tool is not in the PATH.
1394 difftool.<tool>.cmd::
1395 Specify the command to invoke the specified diff tool.
1396 The specified command is evaluated in shell with the following
1397 variables available: 'LOCAL' is set to the name of the temporary
1398 file containing the contents of the diff pre-image and 'REMOTE'
1399 is set to the name of the temporary file containing the contents
1400 of the diff post-image.
1403 Prompt before each invocation of the diff tool.
1405 fastimport.unpackLimit::
1406 If the number of objects imported by linkgit:git-fast-import[1]
1407 is below this limit, then the objects will be unpacked into
1408 loose object files. However if the number of imported objects
1409 equals or exceeds this limit then the pack will be stored as a
1410 pack. Storing the pack from a fast-import can make the import
1411 operation complete faster, especially on slow filesystems. If
1412 not set, the value of `transfer.unpackLimit` is used instead.
1414 fetch.recurseSubmodules::
1415 This option can be either set to a boolean value or to 'on-demand'.
1416 Setting it to a boolean changes the behavior of fetch and pull to
1417 unconditionally recurse into submodules when set to true or to not
1418 recurse at all when set to false. When set to 'on-demand' (the default
1419 value), fetch and pull will only recurse into a populated submodule
1420 when its superproject retrieves a commit that updates the submodule's
1424 If it is set to true, git-fetch-pack will check all fetched
1425 objects. It will abort in the case of a malformed object or a
1426 broken link. The result of an abort are only dangling objects.
1427 Defaults to false. If not set, the value of `transfer.fsckObjects`
1431 If the number of objects fetched over the Git native
1432 transfer is below this
1433 limit, then the objects will be unpacked into loose object
1434 files. However if the number of received objects equals or
1435 exceeds this limit then the received pack will be stored as
1436 a pack, after adding any missing delta bases. Storing the
1437 pack from a push can make the push operation complete faster,
1438 especially on slow filesystems. If not set, the value of
1439 `transfer.unpackLimit` is used instead.
1442 If true, fetch will automatically behave as if the `--prune`
1443 option was given on the command line. See also `remote.<name>.prune`
1444 and the PRUNING section of linkgit:git-fetch[1].
1447 If true, fetch will automatically behave as if the
1448 `refs/tags/*:refs/tags/*` refspec was provided when pruning,
1449 if not set already. This allows for setting both this option
1450 and `fetch.prune` to maintain a 1=1 mapping to upstream
1451 refs. See also `remote.<name>.pruneTags` and the PRUNING
1452 section of linkgit:git-fetch[1].
1455 Control how ref update status is printed. Valid values are
1456 `full` and `compact`. Default value is `full`. See section
1457 OUTPUT in linkgit:git-fetch[1] for detail.
1460 Enable multipart/mixed attachments as the default for
1461 'format-patch'. The value can also be a double quoted string
1462 which will enable attachments as the default and set the
1463 value as the boundary. See the --attach option in
1464 linkgit:git-format-patch[1].
1467 Provides the default value for the `--from` option to format-patch.
1468 Accepts a boolean value, or a name and email address. If false,
1469 format-patch defaults to `--no-from`, using commit authors directly in
1470 the "From:" field of patch mails. If true, format-patch defaults to
1471 `--from`, using your committer identity in the "From:" field of patch
1472 mails and including a "From:" field in the body of the patch mail if
1473 different. If set to a non-boolean value, format-patch uses that
1474 value instead of your committer identity. Defaults to false.
1477 A boolean which can enable or disable sequence numbers in patch
1478 subjects. It defaults to "auto" which enables it only if there
1479 is more than one patch. It can be enabled or disabled for all
1480 messages by setting it to "true" or "false". See --numbered
1481 option in linkgit:git-format-patch[1].
1484 Additional email headers to include in a patch to be submitted
1485 by mail. See linkgit:git-format-patch[1].
1489 Additional recipients to include in a patch to be submitted
1490 by mail. See the --to and --cc options in
1491 linkgit:git-format-patch[1].
1493 format.subjectPrefix::
1494 The default for format-patch is to output files with the '[PATCH]'
1495 subject prefix. Use this variable to change that prefix.
1498 The default for format-patch is to output a signature containing
1499 the Git version number. Use this variable to change that default.
1500 Set this variable to the empty string ("") to suppress
1501 signature generation.
1503 format.signatureFile::
1504 Works just like format.signature except the contents of the
1505 file specified by this variable will be used as the signature.
1508 The default for format-patch is to output files with the suffix
1509 `.patch`. Use this variable to change that suffix (make sure to
1510 include the dot if you want it).
1513 The default pretty format for log/show/whatchanged command,
1514 See linkgit:git-log[1], linkgit:git-show[1],
1515 linkgit:git-whatchanged[1].
1518 The default threading style for 'git format-patch'. Can be
1519 a boolean value, or `shallow` or `deep`. `shallow` threading
1520 makes every mail a reply to the head of the series,
1521 where the head is chosen from the cover letter, the
1522 `--in-reply-to`, and the first patch mail, in this order.
1523 `deep` threading makes every mail a reply to the previous one.
1524 A true boolean value is the same as `shallow`, and a false
1525 value disables threading.
1528 A boolean value which lets you enable the `-s/--signoff` option of
1529 format-patch by default. *Note:* Adding the Signed-off-by: line to a
1530 patch should be a conscious act and means that you certify you have
1531 the rights to submit this work under the same open source license.
1532 Please see the 'SubmittingPatches' document for further discussion.
1534 format.coverLetter::
1535 A boolean that controls whether to generate a cover-letter when
1536 format-patch is invoked, but in addition can be set to "auto", to
1537 generate a cover-letter only when there's more than one patch.
1539 format.outputDirectory::
1540 Set a custom directory to store the resulting files instead of the
1541 current working directory.
1543 format.useAutoBase::
1544 A boolean value which lets you enable the `--base=auto` option of
1545 format-patch by default.
1547 filter.<driver>.clean::
1548 The command which is used to convert the content of a worktree
1549 file to a blob upon checkin. See linkgit:gitattributes[5] for
1552 filter.<driver>.smudge::
1553 The command which is used to convert the content of a blob
1554 object to a worktree file upon checkout. See
1555 linkgit:gitattributes[5] for details.
1558 Allows overriding the message type (error, warn or ignore) of a
1559 specific message ID such as `missingEmail`.
1561 For convenience, fsck prefixes the error/warning with the message ID,
1562 e.g. "missingEmail: invalid author/committer line - missing email" means
1563 that setting `fsck.missingEmail = ignore` will hide that issue.
1565 This feature is intended to support working with legacy repositories
1566 which cannot be repaired without disruptive changes.
1569 The path to a sorted list of object names (i.e. one SHA-1 per
1570 line) that are known to be broken in a non-fatal way and should
1571 be ignored. This feature is useful when an established project
1572 should be accepted despite early commits containing errors that
1573 can be safely ignored such as invalid committer email addresses.
1574 Note: corrupt objects cannot be skipped with this setting.
1576 gc.aggressiveDepth::
1577 The depth parameter used in the delta compression
1578 algorithm used by 'git gc --aggressive'. This defaults
1581 gc.aggressiveWindow::
1582 The window size parameter used in the delta compression
1583 algorithm used by 'git gc --aggressive'. This defaults
1587 When there are approximately more than this many loose
1588 objects in the repository, `git gc --auto` will pack them.
1589 Some Porcelain commands use this command to perform a
1590 light-weight garbage collection from time to time. The
1591 default value is 6700. Setting this to 0 disables it.
1594 When there are more than this many packs that are not
1595 marked with `*.keep` file in the repository, `git gc
1596 --auto` consolidates them into one larger pack. The
1597 default value is 50. Setting this to 0 disables it.
1600 Make `git gc --auto` return immediately and run in background
1601 if the system supports it. Default is true.
1603 gc.bigPackThreshold::
1604 If non-zero, all packs larger than this limit are kept when
1605 `git gc` is run. This is very similar to `--keep-base-pack`
1606 except that all packs that meet the threshold are kept, not
1607 just the base pack. Defaults to zero. Common unit suffixes of
1608 'k', 'm', or 'g' are supported.
1610 Note that if the number of kept packs is more than gc.autoPackLimit,
1611 this configuration variable is ignored, all packs except the base pack
1612 will be repacked. After this the number of packs should go below
1613 gc.autoPackLimit and gc.bigPackThreshold should be respected again.
1616 If the file gc.log exists, then `git gc --auto` won't run
1617 unless that file is more than 'gc.logExpiry' old. Default is
1618 "1.day". See `gc.pruneExpire` for more ways to specify its
1622 Running `git pack-refs` in a repository renders it
1623 unclonable by Git versions prior to 1.5.1.2 over dumb
1624 transports such as HTTP. This variable determines whether
1625 'git gc' runs `git pack-refs`. This can be set to `notbare`
1626 to enable it within all non-bare repos or it can be set to a
1627 boolean value. The default is `true`.
1630 When 'git gc' is run, it will call 'prune --expire 2.weeks.ago'.
1631 Override the grace period with this config variable. The value
1632 "now" may be used to disable this grace period and always prune
1633 unreachable objects immediately, or "never" may be used to
1634 suppress pruning. This feature helps prevent corruption when
1635 'git gc' runs concurrently with another process writing to the
1636 repository; see the "NOTES" section of linkgit:git-gc[1].
1638 gc.worktreePruneExpire::
1639 When 'git gc' is run, it calls
1640 'git worktree prune --expire 3.months.ago'.
1641 This config variable can be used to set a different grace
1642 period. The value "now" may be used to disable the grace
1643 period and prune `$GIT_DIR/worktrees` immediately, or "never"
1644 may be used to suppress pruning.
1647 gc.<pattern>.reflogExpire::
1648 'git reflog expire' removes reflog entries older than
1649 this time; defaults to 90 days. The value "now" expires all
1650 entries immediately, and "never" suppresses expiration
1651 altogether. With "<pattern>" (e.g.
1652 "refs/stash") in the middle the setting applies only to
1653 the refs that match the <pattern>.
1655 gc.reflogExpireUnreachable::
1656 gc.<pattern>.reflogExpireUnreachable::
1657 'git reflog expire' removes reflog entries older than
1658 this time and are not reachable from the current tip;
1659 defaults to 30 days. The value "now" expires all entries
1660 immediately, and "never" suppresses expiration altogether.
1661 With "<pattern>" (e.g. "refs/stash")
1662 in the middle, the setting applies only to the refs that
1663 match the <pattern>.
1666 Records of conflicted merge you resolved earlier are
1667 kept for this many days when 'git rerere gc' is run.
1668 You can also use more human-readable "1.month.ago", etc.
1669 The default is 60 days. See linkgit:git-rerere[1].
1671 gc.rerereUnresolved::
1672 Records of conflicted merge you have not resolved are
1673 kept for this many days when 'git rerere gc' is run.
1674 You can also use more human-readable "1.month.ago", etc.
1675 The default is 15 days. See linkgit:git-rerere[1].
1677 gitcvs.commitMsgAnnotation::
1678 Append this string to each commit message. Set to empty string
1679 to disable this feature. Defaults to "via git-CVS emulator".
1682 Whether the CVS server interface is enabled for this repository.
1683 See linkgit:git-cvsserver[1].
1686 Path to a log file where the CVS server interface well... logs
1687 various stuff. See linkgit:git-cvsserver[1].
1689 gitcvs.usecrlfattr::
1690 If true, the server will look up the end-of-line conversion
1691 attributes for files to determine the `-k` modes to use. If
1692 the attributes force Git to treat a file as text,
1693 the `-k` mode will be left blank so CVS clients will
1694 treat it as text. If they suppress text conversion, the file
1695 will be set with '-kb' mode, which suppresses any newline munging
1696 the client might otherwise do. If the attributes do not allow
1697 the file type to be determined, then `gitcvs.allBinary` is
1698 used. See linkgit:gitattributes[5].
1701 This is used if `gitcvs.usecrlfattr` does not resolve
1702 the correct '-kb' mode to use. If true, all
1703 unresolved files are sent to the client in
1704 mode '-kb'. This causes the client to treat them
1705 as binary files, which suppresses any newline munging it
1706 otherwise might do. Alternatively, if it is set to "guess",
1707 then the contents of the file are examined to decide if
1708 it is binary, similar to `core.autocrlf`.
1711 Database used by git-cvsserver to cache revision information
1712 derived from the Git repository. The exact meaning depends on the
1713 used database driver, for SQLite (which is the default driver) this
1714 is a filename. Supports variable substitution (see
1715 linkgit:git-cvsserver[1] for details). May not contain semicolons (`;`).
1716 Default: '%Ggitcvs.%m.sqlite'
1719 Used Perl DBI driver. You can specify any available driver
1720 for this here, but it might not work. git-cvsserver is tested
1721 with 'DBD::SQLite', reported to work with 'DBD::Pg', and
1722 reported *not* to work with 'DBD::mysql'. Experimental feature.
1723 May not contain double colons (`:`). Default: 'SQLite'.
1724 See linkgit:git-cvsserver[1].
1726 gitcvs.dbUser, gitcvs.dbPass::
1727 Database user and password. Only useful if setting `gitcvs.dbDriver`,
1728 since SQLite has no concept of database users and/or passwords.
1729 'gitcvs.dbUser' supports variable substitution (see
1730 linkgit:git-cvsserver[1] for details).
1732 gitcvs.dbTableNamePrefix::
1733 Database table name prefix. Prepended to the names of any
1734 database tables used, allowing a single database to be used
1735 for several repositories. Supports variable substitution (see
1736 linkgit:git-cvsserver[1] for details). Any non-alphabetic
1737 characters will be replaced with underscores.
1739 All gitcvs variables except for `gitcvs.usecrlfattr` and
1740 `gitcvs.allBinary` can also be specified as
1741 'gitcvs.<access_method>.<varname>' (where 'access_method'
1742 is one of "ext" and "pserver") to make them apply only for the given
1746 gitweb.description::
1749 See linkgit:gitweb[1] for description.
1757 gitweb.remote_heads::
1760 See linkgit:gitweb.conf[5] for description.
1763 If set to true, enable `-n` option by default.
1766 Set the default matching behavior. Using a value of 'basic', 'extended',
1767 'fixed', or 'perl' will enable the `--basic-regexp`, `--extended-regexp`,
1768 `--fixed-strings`, or `--perl-regexp` option accordingly, while the
1769 value 'default' will return to the default matching behavior.
1771 grep.extendedRegexp::
1772 If set to true, enable `--extended-regexp` option by default. This
1773 option is ignored when the `grep.patternType` option is set to a value
1774 other than 'default'.
1777 Number of grep worker threads to use.
1778 See `grep.threads` in linkgit:git-grep[1] for more information.
1780 grep.fallbackToNoIndex::
1781 If set to true, fall back to git grep --no-index if git grep
1782 is executed outside of a git repository. Defaults to false.
1785 Use this custom program instead of "`gpg`" found on `$PATH` when
1786 making or verifying a PGP signature. The program must support the
1787 same command-line interface as GPG, namely, to verify a detached
1788 signature, "`gpg --verify $file - <$signature`" is run, and the
1789 program is expected to signal a good signature by exiting with
1790 code 0, and to generate an ASCII-armored detached signature, the
1791 standard input of "`gpg -bsau $key`" is fed with the contents to be
1792 signed, and the program is expected to send the result to its
1795 gui.commitMsgWidth::
1796 Defines how wide the commit message window is in the
1797 linkgit:git-gui[1]. "75" is the default.
1800 Specifies how many context lines should be used in calls to diff
1801 made by the linkgit:git-gui[1]. The default is "5".
1803 gui.displayUntracked::
1804 Determines if linkgit:git-gui[1] shows untracked files
1805 in the file list. The default is "true".
1808 Specifies the default encoding to use for displaying of
1809 file contents in linkgit:git-gui[1] and linkgit:gitk[1].
1810 It can be overridden by setting the 'encoding' attribute
1811 for relevant files (see linkgit:gitattributes[5]).
1812 If this option is not set, the tools default to the
1815 gui.matchTrackingBranch::
1816 Determines if new branches created with linkgit:git-gui[1] should
1817 default to tracking remote branches with matching names or
1818 not. Default: "false".
1820 gui.newBranchTemplate::
1821 Is used as suggested name when creating new branches using the
1824 gui.pruneDuringFetch::
1825 "true" if linkgit:git-gui[1] should prune remote-tracking branches when
1826 performing a fetch. The default value is "false".
1829 Determines if linkgit:git-gui[1] should trust the file modification
1830 timestamp or not. By default the timestamps are not trusted.
1832 gui.spellingDictionary::
1833 Specifies the dictionary used for spell checking commit messages in
1834 the linkgit:git-gui[1]. When set to "none" spell checking is turned
1838 If true, 'git gui blame' uses `-C` instead of `-C -C` for original
1839 location detection. It makes blame significantly faster on huge
1840 repositories at the expense of less thorough copy detection.
1842 gui.copyBlameThreshold::
1843 Specifies the threshold to use in 'git gui blame' original location
1844 detection, measured in alphanumeric characters. See the
1845 linkgit:git-blame[1] manual for more information on copy detection.
1847 gui.blamehistoryctx::
1848 Specifies the radius of history context in days to show in
1849 linkgit:gitk[1] for the selected commit, when the `Show History
1850 Context` menu item is invoked from 'git gui blame'. If this
1851 variable is set to zero, the whole history is shown.
1853 guitool.<name>.cmd::
1854 Specifies the shell command line to execute when the corresponding item
1855 of the linkgit:git-gui[1] `Tools` menu is invoked. This option is
1856 mandatory for every tool. The command is executed from the root of
1857 the working directory, and in the environment it receives the name of
1858 the tool as `GIT_GUITOOL`, the name of the currently selected file as
1859 'FILENAME', and the name of the current branch as 'CUR_BRANCH' (if
1860 the head is detached, 'CUR_BRANCH' is empty).
1862 guitool.<name>.needsFile::
1863 Run the tool only if a diff is selected in the GUI. It guarantees
1864 that 'FILENAME' is not empty.
1866 guitool.<name>.noConsole::
1867 Run the command silently, without creating a window to display its
1870 guitool.<name>.noRescan::
1871 Don't rescan the working directory for changes after the tool
1874 guitool.<name>.confirm::
1875 Show a confirmation dialog before actually running the tool.
1877 guitool.<name>.argPrompt::
1878 Request a string argument from the user, and pass it to the tool
1879 through the `ARGS` environment variable. Since requesting an
1880 argument implies confirmation, the 'confirm' option has no effect
1881 if this is enabled. If the option is set to 'true', 'yes', or '1',
1882 the dialog uses a built-in generic prompt; otherwise the exact
1883 value of the variable is used.
1885 guitool.<name>.revPrompt::
1886 Request a single valid revision from the user, and set the
1887 `REVISION` environment variable. In other aspects this option
1888 is similar to 'argPrompt', and can be used together with it.
1890 guitool.<name>.revUnmerged::
1891 Show only unmerged branches in the 'revPrompt' subdialog.
1892 This is useful for tools similar to merge or rebase, but not
1893 for things like checkout or reset.
1895 guitool.<name>.title::
1896 Specifies the title to use for the prompt dialog. The default
1899 guitool.<name>.prompt::
1900 Specifies the general prompt string to display at the top of
1901 the dialog, before subsections for 'argPrompt' and 'revPrompt'.
1902 The default value includes the actual command.
1905 Specify the browser that will be used to display help in the
1906 'web' format. See linkgit:git-help[1].
1909 Override the default help format used by linkgit:git-help[1].
1910 Values 'man', 'info', 'web' and 'html' are supported. 'man' is
1911 the default. 'web' and 'html' are the same.
1914 Automatically correct and execute mistyped commands after
1915 waiting for the given number of deciseconds (0.1 sec). If more
1916 than one command can be deduced from the entered text, nothing
1917 will be executed. If the value of this option is negative,
1918 the corrected command will be executed immediately. If the
1919 value is 0 - the command will be just shown but not executed.
1920 This is the default.
1923 Specify the path where the HTML documentation resides. File system paths
1924 and URLs are supported. HTML pages will be prefixed with this path when
1925 help is displayed in the 'web' format. This defaults to the documentation
1926 path of your Git installation.
1929 Override the HTTP proxy, normally configured using the 'http_proxy',
1930 'https_proxy', and 'all_proxy' environment variables (see `curl(1)`). In
1931 addition to the syntax understood by curl, it is possible to specify a
1932 proxy string with a user name but no password, in which case git will
1933 attempt to acquire one in the same way it does for other credentials. See
1934 linkgit:gitcredentials[7] for more information. The syntax thus is
1935 '[protocol://][user[:password]@]proxyhost[:port]'. This can be overridden
1936 on a per-remote basis; see remote.<name>.proxy
1938 http.proxyAuthMethod::
1939 Set the method with which to authenticate against the HTTP proxy. This
1940 only takes effect if the configured proxy string contains a user name part
1941 (i.e. is of the form 'user@host' or 'user@host:port'). This can be
1942 overridden on a per-remote basis; see `remote.<name>.proxyAuthMethod`.
1943 Both can be overridden by the `GIT_HTTP_PROXY_AUTHMETHOD` environment
1944 variable. Possible values are:
1947 * `anyauth` - Automatically pick a suitable authentication method. It is
1948 assumed that the proxy answers an unauthenticated request with a 407
1949 status code and one or more Proxy-authenticate headers with supported
1950 authentication methods. This is the default.
1951 * `basic` - HTTP Basic authentication
1952 * `digest` - HTTP Digest authentication; this prevents the password from being
1953 transmitted to the proxy in clear text
1954 * `negotiate` - GSS-Negotiate authentication (compare the --negotiate option
1956 * `ntlm` - NTLM authentication (compare the --ntlm option of `curl(1)`)
1960 Attempt authentication without seeking a username or password. This
1961 can be used to attempt GSS-Negotiate authentication without specifying
1962 a username in the URL, as libcurl normally requires a username for
1966 Control GSSAPI credential delegation. The delegation is disabled
1967 by default in libcurl since version 7.21.7. Set parameter to tell
1968 the server what it is allowed to delegate when it comes to user
1969 credentials. Used with GSS/kerberos. Possible values are:
1972 * `none` - Don't allow any delegation.
1973 * `policy` - Delegates if and only if the OK-AS-DELEGATE flag is set in the
1974 Kerberos service ticket, which is a matter of realm policy.
1975 * `always` - Unconditionally allow the server to delegate.
1980 Pass an additional HTTP header when communicating with a server. If
1981 more than one such entry exists, all of them are added as extra
1982 headers. To allow overriding the settings inherited from the system
1983 config, an empty value will reset the extra headers to the empty list.
1986 The pathname of a file containing previously stored cookie lines,
1987 which should be used
1988 in the Git http session, if they match the server. The file format
1989 of the file to read cookies from should be plain HTTP headers or
1990 the Netscape/Mozilla cookie file format (see `curl(1)`).
1991 NOTE that the file specified with http.cookieFile is used only as
1992 input unless http.saveCookies is set.
1995 If set, store cookies received during requests to the file specified by
1996 http.cookieFile. Has no effect if http.cookieFile is unset.
1999 The SSL version to use when negotiating an SSL connection, if you
2000 want to force the default. The available and default version
2001 depend on whether libcurl was built against NSS or OpenSSL and the
2002 particular configuration of the crypto library in use. Internally
2003 this sets the 'CURLOPT_SSL_VERSION' option; see the libcurl
2004 documentation for more details on the format of this option and
2005 for the ssl version supported. Actually the possible values of
2017 Can be overridden by the `GIT_SSL_VERSION` environment variable.
2018 To force git to use libcurl's default ssl version and ignore any
2019 explicit http.sslversion option, set `GIT_SSL_VERSION` to the
2022 http.sslCipherList::
2023 A list of SSL ciphers to use when negotiating an SSL connection.
2024 The available ciphers depend on whether libcurl was built against
2025 NSS or OpenSSL and the particular configuration of the crypto
2026 library in use. Internally this sets the 'CURLOPT_SSL_CIPHER_LIST'
2027 option; see the libcurl documentation for more details on the format
2030 Can be overridden by the `GIT_SSL_CIPHER_LIST` environment variable.
2031 To force git to use libcurl's default cipher list and ignore any
2032 explicit http.sslCipherList option, set `GIT_SSL_CIPHER_LIST` to the
2036 Whether to verify the SSL certificate when fetching or pushing
2037 over HTTPS. Defaults to true. Can be overridden by the
2038 `GIT_SSL_NO_VERIFY` environment variable.
2041 File containing the SSL certificate when fetching or pushing
2042 over HTTPS. Can be overridden by the `GIT_SSL_CERT` environment
2046 File containing the SSL private key when fetching or pushing
2047 over HTTPS. Can be overridden by the `GIT_SSL_KEY` environment
2050 http.sslCertPasswordProtected::
2051 Enable Git's password prompt for the SSL certificate. Otherwise
2052 OpenSSL will prompt the user, possibly many times, if the
2053 certificate or private key is encrypted. Can be overridden by the
2054 `GIT_SSL_CERT_PASSWORD_PROTECTED` environment variable.
2057 File containing the certificates to verify the peer with when
2058 fetching or pushing over HTTPS. Can be overridden by the
2059 `GIT_SSL_CAINFO` environment variable.
2062 Path containing files with the CA certificates to verify the peer
2063 with when fetching or pushing over HTTPS. Can be overridden
2064 by the `GIT_SSL_CAPATH` environment variable.
2067 Public key of the https service. It may either be the filename of
2068 a PEM or DER encoded public key file or a string starting with
2069 'sha256//' followed by the base64 encoded sha256 hash of the
2070 public key. See also libcurl 'CURLOPT_PINNEDPUBLICKEY'. git will
2071 exit with an error if this option is set but not supported by
2075 Attempt to use AUTH SSL/TLS and encrypted data transfers
2076 when connecting via regular FTP protocol. This might be needed
2077 if the FTP server requires it for security reasons or you wish
2078 to connect securely whenever remote FTP server supports it.
2079 Default is false since it might trigger certificate verification
2080 errors on misconfigured servers.
2083 How many HTTP requests to launch in parallel. Can be overridden
2084 by the `GIT_HTTP_MAX_REQUESTS` environment variable. Default is 5.
2087 The number of curl sessions (counted across slots) to be kept across
2088 requests. They will not be ended with curl_easy_cleanup() until
2089 http_cleanup() is invoked. If USE_CURL_MULTI is not defined, this
2090 value will be capped at 1. Defaults to 1.
2093 Maximum size in bytes of the buffer used by smart HTTP
2094 transports when POSTing data to the remote system.
2095 For requests larger than this buffer size, HTTP/1.1 and
2096 Transfer-Encoding: chunked is used to avoid creating a
2097 massive pack file locally. Default is 1 MiB, which is
2098 sufficient for most requests.
2100 http.lowSpeedLimit, http.lowSpeedTime::
2101 If the HTTP transfer speed is less than 'http.lowSpeedLimit'
2102 for longer than 'http.lowSpeedTime' seconds, the transfer is aborted.
2103 Can be overridden by the `GIT_HTTP_LOW_SPEED_LIMIT` and
2104 `GIT_HTTP_LOW_SPEED_TIME` environment variables.
2107 A boolean which disables using of EPSV ftp command by curl.
2108 This can helpful with some "poor" ftp servers which don't
2109 support EPSV mode. Can be overridden by the `GIT_CURL_FTP_NO_EPSV`
2110 environment variable. Default is false (curl will use EPSV).
2113 The HTTP USER_AGENT string presented to an HTTP server. The default
2114 value represents the version of the client Git such as git/1.7.1.
2115 This option allows you to override this value to a more common value
2116 such as Mozilla/4.0. This may be necessary, for instance, if
2117 connecting through a firewall that restricts HTTP connections to a set
2118 of common USER_AGENT strings (but not including those like git/1.7.1).
2119 Can be overridden by the `GIT_HTTP_USER_AGENT` environment variable.
2121 http.followRedirects::
2122 Whether git should follow HTTP redirects. If set to `true`, git
2123 will transparently follow any redirect issued by a server it
2124 encounters. If set to `false`, git will treat all redirects as
2125 errors. If set to `initial`, git will follow redirects only for
2126 the initial request to a remote, but not for subsequent
2127 follow-up HTTP requests. Since git uses the redirected URL as
2128 the base for the follow-up requests, this is generally
2129 sufficient. The default is `initial`.
2132 Any of the http.* options above can be applied selectively to some URLs.
2133 For a config key to match a URL, each element of the config key is
2134 compared to that of the URL, in the following order:
2137 . Scheme (e.g., `https` in `https://example.com/`). This field
2138 must match exactly between the config key and the URL.
2140 . Host/domain name (e.g., `example.com` in `https://example.com/`).
2141 This field must match between the config key and the URL. It is
2142 possible to specify a `*` as part of the host name to match all subdomains
2143 at this level. `https://*.example.com/` for example would match
2144 `https://foo.example.com/`, but not `https://foo.bar.example.com/`.
2146 . Port number (e.g., `8080` in `http://example.com:8080/`).
2147 This field must match exactly between the config key and the URL.
2148 Omitted port numbers are automatically converted to the correct
2149 default for the scheme before matching.
2151 . Path (e.g., `repo.git` in `https://example.com/repo.git`). The
2152 path field of the config key must match the path field of the URL
2153 either exactly or as a prefix of slash-delimited path elements. This means
2154 a config key with path `foo/` matches URL path `foo/bar`. A prefix can only
2155 match on a slash (`/`) boundary. Longer matches take precedence (so a config
2156 key with path `foo/bar` is a better match to URL path `foo/bar` than a config
2157 key with just path `foo/`).
2159 . User name (e.g., `user` in `https://user@example.com/repo.git`). If
2160 the config key has a user name it must match the user name in the
2161 URL exactly. If the config key does not have a user name, that
2162 config key will match a URL with any user name (including none),
2163 but at a lower precedence than a config key with a user name.
2166 The list above is ordered by decreasing precedence; a URL that matches
2167 a config key's path is preferred to one that matches its user name. For example,
2168 if the URL is `https://user@example.com/foo/bar` a config key match of
2169 `https://example.com/foo` will be preferred over a config key match of
2170 `https://user@example.com`.
2172 All URLs are normalized before attempting any matching (the password part,
2173 if embedded in the URL, is always ignored for matching purposes) so that
2174 equivalent URLs that are simply spelled differently will match properly.
2175 Environment variable settings always override any matches. The URLs that are
2176 matched against are those given directly to Git commands. This means any URLs
2177 visited as a result of a redirection do not participate in matching.
2180 By default, Git determines the command line arguments to use
2181 based on the basename of the configured SSH command (configured
2182 using the environment variable `GIT_SSH` or `GIT_SSH_COMMAND` or
2183 the config setting `core.sshCommand`). If the basename is
2184 unrecognized, Git will attempt to detect support of OpenSSH
2185 options by first invoking the configured SSH command with the
2186 `-G` (print configuration) option and will subsequently use
2187 OpenSSH options (if that is successful) or no options besides
2188 the host and remote command (if it fails).
2190 The config variable `ssh.variant` can be set to override this detection.
2191 Valid values are `ssh` (to use OpenSSH options), `plink`, `putty`,
2192 `tortoiseplink`, `simple` (no options except the host and remote command).
2193 The default auto-detection can be explicitly requested using the value
2194 `auto`. Any other value is treated as `ssh`. This setting can also be
2195 overridden via the environment variable `GIT_SSH_VARIANT`.
2197 The current command-line parameters used for each variant are as
2202 * `ssh` - [-p port] [-4] [-6] [-o option] [username@]host command
2204 * `simple` - [username@]host command
2206 * `plink` or `putty` - [-P port] [-4] [-6] [username@]host command
2208 * `tortoiseplink` - [-P port] [-4] [-6] -batch [username@]host command
2212 Except for the `simple` variant, command-line parameters are likely to
2213 change as git gains new features.
2215 i18n.commitEncoding::
2216 Character encoding the commit messages are stored in; Git itself
2217 does not care per se, but this information is necessary e.g. when
2218 importing commits from emails or in the gitk graphical history
2219 browser (and possibly at other places in the future or in other
2220 porcelains). See e.g. linkgit:git-mailinfo[1]. Defaults to 'utf-8'.
2222 i18n.logOutputEncoding::
2223 Character encoding the commit messages are converted to when
2224 running 'git log' and friends.
2227 The configuration variables in the 'imap' section are described
2228 in linkgit:git-imap-send[1].
2231 Specify the version with which new index files should be
2232 initialized. This does not affect existing repositories.
2235 Specify the directory from which templates will be copied.
2236 (See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].)
2239 Specify the program that will be used to browse your working
2240 repository in gitweb. See linkgit:git-instaweb[1].
2243 The HTTP daemon command-line to start gitweb on your working
2244 repository. See linkgit:git-instaweb[1].
2247 If true the web server started by linkgit:git-instaweb[1] will
2248 be bound to the local IP (127.0.0.1).
2250 instaweb.modulePath::
2251 The default module path for linkgit:git-instaweb[1] to use
2252 instead of /usr/lib/apache2/modules. Only used if httpd
2256 The port number to bind the gitweb httpd to. See
2257 linkgit:git-instaweb[1].
2259 interactive.singleKey::
2260 In interactive commands, allow the user to provide one-letter
2261 input with a single key (i.e., without hitting enter).
2262 Currently this is used by the `--patch` mode of
2263 linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1],
2264 linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this
2265 setting is silently ignored if portable keystroke input
2266 is not available; requires the Perl module Term::ReadKey.
2268 interactive.diffFilter::
2269 When an interactive command (such as `git add --patch`) shows
2270 a colorized diff, git will pipe the diff through the shell
2271 command defined by this configuration variable. The command may
2272 mark up the diff further for human consumption, provided that it
2273 retains a one-to-one correspondence with the lines in the
2274 original diff. Defaults to disabled (no filtering).
2277 If true, makes linkgit:git-log[1], linkgit:git-show[1], and
2278 linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may
2279 override this option with `--no-abbrev-commit`.
2282 Set the default date-time mode for the 'log' command.
2283 Setting a value for log.date is similar to using 'git log''s
2284 `--date` option. See linkgit:git-log[1] for details.
2287 Print out the ref names of any commits that are shown by the log
2288 command. If 'short' is specified, the ref name prefixes 'refs/heads/',
2289 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is
2290 specified, the full ref name (including prefix) will be printed.
2291 If 'auto' is specified, then if the output is going to a terminal,
2292 the ref names are shown as if 'short' were given, otherwise no ref
2293 names are shown. This is the same as the `--decorate` option
2297 If `true`, `git log` will act as if the `--follow` option was used when
2298 a single <path> is given. This has the same limitations as `--follow`,
2299 i.e. it cannot be used to follow multiple files and does not work well
2300 on non-linear history.
2303 A list of colors, separated by commas, that can be used to draw
2304 history lines in `git log --graph`.
2307 If true, the initial commit will be shown as a big creation event.
2308 This is equivalent to a diff against an empty tree.
2309 Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which
2310 normally hide the root commit will now show it. True by default.
2313 If true, makes linkgit:git-log[1], linkgit:git-show[1], and
2314 linkgit:git-whatchanged[1] assume `--show-signature`.
2317 If true, makes linkgit:git-log[1], linkgit:git-show[1], and
2318 linkgit:git-whatchanged[1] assume `--use-mailmap`.
2321 If true, makes linkgit:git-mailinfo[1] (and therefore
2322 linkgit:git-am[1]) act by default as if the --scissors option
2323 was provided on the command-line. When active, this features
2324 removes everything from the message body before a scissors
2325 line (i.e. consisting mainly of ">8", "8<" and "-").
2328 The location of an augmenting mailmap file. The default
2329 mailmap, located in the root of the repository, is loaded
2330 first, then the mailmap file pointed to by this variable.
2331 The location of the mailmap file may be in a repository
2332 subdirectory, or somewhere outside of the repository itself.
2333 See linkgit:git-shortlog[1] and linkgit:git-blame[1].
2336 Like `mailmap.file`, but consider the value as a reference to a
2337 blob in the repository. If both `mailmap.file` and
2338 `mailmap.blob` are given, both are parsed, with entries from
2339 `mailmap.file` taking precedence. In a bare repository, this
2340 defaults to `HEAD:.mailmap`. In a non-bare repository, it
2344 Specify the programs that may be used to display help in the
2345 'man' format. See linkgit:git-help[1].
2348 Specify the command to invoke the specified man viewer. The
2349 specified command is evaluated in shell with the man page
2350 passed as argument. (See linkgit:git-help[1].)
2353 Override the path for the given tool that may be used to
2354 display help in the 'man' format. See linkgit:git-help[1].
2356 include::merge-config.txt[]
2358 mergetool.<tool>.path::
2359 Override the path for the given tool. This is useful in case
2360 your tool is not in the PATH.
2362 mergetool.<tool>.cmd::
2363 Specify the command to invoke the specified merge tool. The
2364 specified command is evaluated in shell with the following
2365 variables available: 'BASE' is the name of a temporary file
2366 containing the common base of the files to be merged, if available;
2367 'LOCAL' is the name of a temporary file containing the contents of
2368 the file on the current branch; 'REMOTE' is the name of a temporary
2369 file containing the contents of the file from the branch being
2370 merged; 'MERGED' contains the name of the file to which the merge
2371 tool should write the results of a successful merge.
2373 mergetool.<tool>.trustExitCode::
2374 For a custom merge command, specify whether the exit code of
2375 the merge command can be used to determine whether the merge was
2376 successful. If this is not set to true then the merge target file
2377 timestamp is checked and the merge assumed to have been successful
2378 if the file has been updated, otherwise the user is prompted to
2379 indicate the success of the merge.
2381 mergetool.meld.hasOutput::
2382 Older versions of `meld` do not support the `--output` option.
2383 Git will attempt to detect whether `meld` supports `--output`
2384 by inspecting the output of `meld --help`. Configuring
2385 `mergetool.meld.hasOutput` will make Git skip these checks and
2386 use the configured value instead. Setting `mergetool.meld.hasOutput`
2387 to `true` tells Git to unconditionally use the `--output` option,
2388 and `false` avoids using `--output`.
2390 mergetool.keepBackup::
2391 After performing a merge, the original file with conflict markers
2392 can be saved as a file with a `.orig` extension. If this variable
2393 is set to `false` then this file is not preserved. Defaults to
2394 `true` (i.e. keep the backup files).
2396 mergetool.keepTemporaries::
2397 When invoking a custom merge tool, Git uses a set of temporary
2398 files to pass to the tool. If the tool returns an error and this
2399 variable is set to `true`, then these temporary files will be
2400 preserved, otherwise they will be removed after the tool has
2401 exited. Defaults to `false`.
2403 mergetool.writeToTemp::
2404 Git writes temporary 'BASE', 'LOCAL', and 'REMOTE' versions of
2405 conflicting files in the worktree by default. Git will attempt
2406 to use a temporary directory for these files when set `true`.
2407 Defaults to `false`.
2410 Prompt before each invocation of the merge resolution program.
2412 notes.mergeStrategy::
2413 Which merge strategy to choose by default when resolving notes
2414 conflicts. Must be one of `manual`, `ours`, `theirs`, `union`, or
2415 `cat_sort_uniq`. Defaults to `manual`. See "NOTES MERGE STRATEGIES"
2416 section of linkgit:git-notes[1] for more information on each strategy.
2418 notes.<name>.mergeStrategy::
2419 Which merge strategy to choose when doing a notes merge into
2420 refs/notes/<name>. This overrides the more general
2421 "notes.mergeStrategy". See the "NOTES MERGE STRATEGIES" section in
2422 linkgit:git-notes[1] for more information on the available strategies.
2425 The (fully qualified) refname from which to show notes when
2426 showing commit messages. The value of this variable can be set
2427 to a glob, in which case notes from all matching refs will be
2428 shown. You may also specify this configuration variable
2429 several times. A warning will be issued for refs that do not
2430 exist, but a glob that does not match any refs is silently
2433 This setting can be overridden with the `GIT_NOTES_DISPLAY_REF`
2434 environment variable, which must be a colon separated list of refs or
2437 The effective value of "core.notesRef" (possibly overridden by
2438 GIT_NOTES_REF) is also implicitly added to the list of refs to be
2441 notes.rewrite.<command>::
2442 When rewriting commits with <command> (currently `amend` or
2443 `rebase`) and this variable is set to `true`, Git
2444 automatically copies your notes from the original to the
2445 rewritten commit. Defaults to `true`, but see
2446 "notes.rewriteRef" below.
2449 When copying notes during a rewrite (see the
2450 "notes.rewrite.<command>" option), determines what to do if
2451 the target commit already has a note. Must be one of
2452 `overwrite`, `concatenate`, `cat_sort_uniq`, or `ignore`.
2453 Defaults to `concatenate`.
2455 This setting can be overridden with the `GIT_NOTES_REWRITE_MODE`
2456 environment variable.
2459 When copying notes during a rewrite, specifies the (fully
2460 qualified) ref whose notes should be copied. The ref may be a
2461 glob, in which case notes in all matching refs will be copied.
2462 You may also specify this configuration several times.
2464 Does not have a default value; you must configure this variable to
2465 enable note rewriting. Set it to `refs/notes/commits` to enable
2466 rewriting for the default commit notes.
2468 This setting can be overridden with the `GIT_NOTES_REWRITE_REF`
2469 environment variable, which must be a colon separated list of refs or
2473 The size of the window used by linkgit:git-pack-objects[1] when no
2474 window size is given on the command line. Defaults to 10.
2477 The maximum delta depth used by linkgit:git-pack-objects[1] when no
2478 maximum depth is given on the command line. Defaults to 50.
2479 Maximum value is 4095.
2482 The maximum size of memory that is consumed by each thread
2483 in linkgit:git-pack-objects[1] for pack window memory when
2484 no limit is given on the command line. The value can be
2485 suffixed with "k", "m", or "g". When left unconfigured (or
2486 set explicitly to 0), there will be no limit.
2489 An integer -1..9, indicating the compression level for objects
2490 in a pack file. -1 is the zlib default. 0 means no
2491 compression, and 1..9 are various speed/size tradeoffs, 9 being
2492 slowest. If not set, defaults to core.compression. If that is
2493 not set, defaults to -1, the zlib default, which is "a default
2494 compromise between speed and compression (currently equivalent
2497 Note that changing the compression level will not automatically recompress
2498 all existing objects. You can force recompression by passing the -F option
2499 to linkgit:git-repack[1].
2501 pack.deltaCacheSize::
2502 The maximum memory in bytes used for caching deltas in
2503 linkgit:git-pack-objects[1] before writing them out to a pack.
2504 This cache is used to speed up the writing object phase by not
2505 having to recompute the final delta result once the best match
2506 for all objects is found. Repacking large repositories on machines
2507 which are tight with memory might be badly impacted by this though,
2508 especially if this cache pushes the system into swapping.
2509 A value of 0 means no limit. The smallest size of 1 byte may be
2510 used to virtually disable this cache. Defaults to 256 MiB.
2512 pack.deltaCacheLimit::
2513 The maximum size of a delta, that is cached in
2514 linkgit:git-pack-objects[1]. This cache is used to speed up the
2515 writing object phase by not having to recompute the final delta
2516 result once the best match for all objects is found.
2517 Defaults to 1000. Maximum value is 65535.
2520 Specifies the number of threads to spawn when searching for best
2521 delta matches. This requires that linkgit:git-pack-objects[1]
2522 be compiled with pthreads otherwise this option is ignored with a
2523 warning. This is meant to reduce packing time on multiprocessor
2524 machines. The required amount of memory for the delta search window
2525 is however multiplied by the number of threads.
2526 Specifying 0 will cause Git to auto-detect the number of CPU's
2527 and set the number of threads accordingly.
2530 Specify the default pack index version. Valid values are 1 for
2531 legacy pack index used by Git versions prior to 1.5.2, and 2 for
2532 the new pack index with capabilities for packs larger than 4 GB
2533 as well as proper protection against the repacking of corrupted
2534 packs. Version 2 is the default. Note that version 2 is enforced
2535 and this config option ignored whenever the corresponding pack is
2538 If you have an old Git that does not understand the version 2 `*.idx` file,
2539 cloning or fetching over a non native protocol (e.g. "http")
2540 that will copy both `*.pack` file and corresponding `*.idx` file from the
2541 other side may give you a repository that cannot be accessed with your
2542 older version of Git. If the `*.pack` file is smaller than 2 GB, however,
2543 you can use linkgit:git-index-pack[1] on the *.pack file to regenerate
2546 pack.packSizeLimit::
2547 The maximum size of a pack. This setting only affects
2548 packing to a file when repacking, i.e. the git:// protocol
2549 is unaffected. It can be overridden by the `--max-pack-size`
2550 option of linkgit:git-repack[1]. Reaching this limit results
2551 in the creation of multiple packfiles; which in turn prevents
2552 bitmaps from being created.
2553 The minimum size allowed is limited to 1 MiB.
2554 The default is unlimited.
2555 Common unit suffixes of 'k', 'm', or 'g' are
2559 When true, git will use pack bitmaps (if available) when packing
2560 to stdout (e.g., during the server side of a fetch). Defaults to
2561 true. You should not generally need to turn this off unless
2562 you are debugging pack bitmaps.
2564 pack.writeBitmaps (deprecated)::
2565 This is a deprecated synonym for `repack.writeBitmaps`.
2567 pack.writeBitmapHashCache::
2568 When true, git will include a "hash cache" section in the bitmap
2569 index (if one is written). This cache can be used to feed git's
2570 delta heuristics, potentially leading to better deltas between
2571 bitmapped and non-bitmapped objects (e.g., when serving a fetch
2572 between an older, bitmapped pack and objects that have been
2573 pushed since the last gc). The downside is that it consumes 4
2574 bytes per object of disk space, and that JGit's bitmap
2575 implementation does not understand it, causing it to complain if
2576 Git and JGit are used on the same repository. Defaults to false.
2579 If the value is boolean, turns on or off pagination of the
2580 output of a particular Git subcommand when writing to a tty.
2581 Otherwise, turns on pagination for the subcommand using the
2582 pager specified by the value of `pager.<cmd>`. If `--paginate`
2583 or `--no-pager` is specified on the command line, it takes
2584 precedence over this option. To disable pagination for all
2585 commands, set `core.pager` or `GIT_PAGER` to `cat`.
2588 Alias for a --pretty= format string, as specified in
2589 linkgit:git-log[1]. Any aliases defined here can be used just
2590 as the built-in pretty formats could. For example,
2591 running `git config pretty.changelog "format:* %H %s"`
2592 would cause the invocation `git log --pretty=changelog`
2593 to be equivalent to running `git log "--pretty=format:* %H %s"`.
2594 Note that an alias with the same name as a built-in format
2595 will be silently ignored.
2598 If set, provide a user defined default policy for all protocols which
2599 don't explicitly have a policy (`protocol.<name>.allow`). By default,
2600 if unset, known-safe protocols (http, https, git, ssh, file) have a
2601 default policy of `always`, known-dangerous protocols (ext) have a
2602 default policy of `never`, and all other protocols have a default
2603 policy of `user`. Supported policies:
2607 * `always` - protocol is always able to be used.
2609 * `never` - protocol is never able to be used.
2611 * `user` - protocol is only able to be used when `GIT_PROTOCOL_FROM_USER` is
2612 either unset or has a value of 1. This policy should be used when you want a
2613 protocol to be directly usable by the user but don't want it used by commands which
2614 execute clone/fetch/push commands without user input, e.g. recursive
2615 submodule initialization.
2619 protocol.<name>.allow::
2620 Set a policy to be used by protocol `<name>` with clone/fetch/push
2621 commands. See `protocol.allow` above for the available policies.
2623 The protocol names currently used by git are:
2626 - `file`: any local file-based path (including `file://` URLs,
2629 - `git`: the anonymous git protocol over a direct TCP
2630 connection (or proxy, if configured)
2632 - `ssh`: git over ssh (including `host:path` syntax,
2635 - `http`: git over http, both "smart http" and "dumb http".
2636 Note that this does _not_ include `https`; if you want to configure
2637 both, you must do so individually.
2639 - any external helpers are named by their protocol (e.g., use
2640 `hg` to allow the `git-remote-hg` helper)
2644 Experimental. If set, clients will attempt to communicate with a
2645 server using the specified protocol version. If unset, no
2646 attempt will be made by the client to communicate using a
2647 particular protocol version, this results in protocol version 0
2653 * `0` - the original wire protocol.
2655 * `1` - the original wire protocol with the addition of a version string
2656 in the initial response from the server.
2661 By default, Git does not create an extra merge commit when merging
2662 a commit that is a descendant of the current commit. Instead, the
2663 tip of the current branch is fast-forwarded. When set to `false`,
2664 this variable tells Git to create an extra merge commit in such
2665 a case (equivalent to giving the `--no-ff` option from the command
2666 line). When set to `only`, only such fast-forward merges are
2667 allowed (equivalent to giving the `--ff-only` option from the
2668 command line). This setting overrides `merge.ff` when pulling.
2671 When true, rebase branches on top of the fetched branch, instead
2672 of merging the default branch from the default remote when "git
2673 pull" is run. See "branch.<name>.rebase" for setting this on a
2676 When `merges`, pass the `--rebase-merges` option to 'git rebase'
2677 so that the local merge commits are included in the rebase (see
2678 linkgit:git-rebase[1] for details).
2680 When preserve, also pass `--preserve-merges` along to 'git rebase'
2681 so that locally committed merge commits will not be flattened
2682 by running 'git pull'.
2684 When the value is `interactive`, the rebase is run in interactive mode.
2686 *NOTE*: this is a possibly dangerous operation; do *not* use
2687 it unless you understand the implications (see linkgit:git-rebase[1]
2691 The default merge strategy to use when pulling multiple branches
2695 The default merge strategy to use when pulling a single branch.
2698 Defines the action `git push` should take if no refspec is
2699 explicitly given. Different values are well-suited for
2700 specific workflows; for instance, in a purely central workflow
2701 (i.e. the fetch source is equal to the push destination),
2702 `upstream` is probably what you want. Possible values are:
2706 * `nothing` - do not push anything (error out) unless a refspec is
2707 explicitly given. This is primarily meant for people who want to
2708 avoid mistakes by always being explicit.
2710 * `current` - push the current branch to update a branch with the same
2711 name on the receiving end. Works in both central and non-central
2714 * `upstream` - push the current branch back to the branch whose
2715 changes are usually integrated into the current branch (which is
2716 called `@{upstream}`). This mode only makes sense if you are
2717 pushing to the same repository you would normally pull from
2718 (i.e. central workflow).
2720 * `tracking` - This is a deprecated synonym for `upstream`.
2722 * `simple` - in centralized workflow, work like `upstream` with an
2723 added safety to refuse to push if the upstream branch's name is
2724 different from the local one.
2726 When pushing to a remote that is different from the remote you normally
2727 pull from, work as `current`. This is the safest option and is suited
2730 This mode has become the default in Git 2.0.
2732 * `matching` - push all branches having the same name on both ends.
2733 This makes the repository you are pushing to remember the set of
2734 branches that will be pushed out (e.g. if you always push 'maint'
2735 and 'master' there and no other branches, the repository you push
2736 to will have these two branches, and your local 'maint' and
2737 'master' will be pushed there).
2739 To use this mode effectively, you have to make sure _all_ the
2740 branches you would push out are ready to be pushed out before
2741 running 'git push', as the whole point of this mode is to allow you
2742 to push all of the branches in one go. If you usually finish work
2743 on only one branch and push out the result, while other branches are
2744 unfinished, this mode is not for you. Also this mode is not
2745 suitable for pushing into a shared central repository, as other
2746 people may add new branches there, or update the tip of existing
2747 branches outside your control.
2749 This used to be the default, but not since Git 2.0 (`simple` is the
2755 If set to true enable `--follow-tags` option by default. You
2756 may override this configuration at time of push by specifying
2760 May be set to a boolean value, or the string 'if-asked'. A true
2761 value causes all pushes to be GPG signed, as if `--signed` is
2762 passed to linkgit:git-push[1]. The string 'if-asked' causes
2763 pushes to be signed if the server supports it, as if
2764 `--signed=if-asked` is passed to 'git push'. A false value may
2765 override a value from a lower-priority config file. An explicit
2766 command-line flag always overrides this config option.
2769 When no `--push-option=<option>` argument is given from the
2770 command line, `git push` behaves as if each <value> of
2771 this variable is given as `--push-option=<value>`.
2773 This is a multi-valued variable, and an empty value can be used in a
2774 higher priority configuration file (e.g. `.git/config` in a
2775 repository) to clear the values inherited from a lower priority
2776 configuration files (e.g. `$HOME/.gitconfig`).
2793 This will result in only b (a and c are cleared).
2797 push.recurseSubmodules::
2798 Make sure all submodule commits used by the revisions to be pushed
2799 are available on a remote-tracking branch. If the value is 'check'
2800 then Git will verify that all submodule commits that changed in the
2801 revisions to be pushed are available on at least one remote of the
2802 submodule. If any commits are missing, the push will be aborted and
2803 exit with non-zero status. If the value is 'on-demand' then all
2804 submodules that changed in the revisions to be pushed will be
2805 pushed. If on-demand was not able to push all necessary revisions
2806 it will also be aborted and exit with non-zero status. If the value
2807 is 'no' then default behavior of ignoring submodules when pushing
2808 is retained. You may override this configuration at time of push by
2809 specifying '--recurse-submodules=check|on-demand|no'.
2811 include::rebase-config.txt[]
2813 receive.advertiseAtomic::
2814 By default, git-receive-pack will advertise the atomic push
2815 capability to its clients. If you don't want to advertise this
2816 capability, set this variable to false.
2818 receive.advertisePushOptions::
2819 When set to true, git-receive-pack will advertise the push options
2820 capability to its clients. False by default.
2823 By default, git-receive-pack will run "git-gc --auto" after
2824 receiving data from git-push and updating refs. You can stop
2825 it by setting this variable to false.
2827 receive.certNonceSeed::
2828 By setting this variable to a string, `git receive-pack`
2829 will accept a `git push --signed` and verifies it by using
2830 a "nonce" protected by HMAC using this string as a secret
2833 receive.certNonceSlop::
2834 When a `git push --signed` sent a push certificate with a
2835 "nonce" that was issued by a receive-pack serving the same
2836 repository within this many seconds, export the "nonce"
2837 found in the certificate to `GIT_PUSH_CERT_NONCE` to the
2838 hooks (instead of what the receive-pack asked the sending
2839 side to include). This may allow writing checks in
2840 `pre-receive` and `post-receive` a bit easier. Instead of
2841 checking `GIT_PUSH_CERT_NONCE_SLOP` environment variable
2842 that records by how many seconds the nonce is stale to
2843 decide if they want to accept the certificate, they only
2844 can check `GIT_PUSH_CERT_NONCE_STATUS` is `OK`.
2846 receive.fsckObjects::
2847 If it is set to true, git-receive-pack will check all received
2848 objects. It will abort in the case of a malformed object or a
2849 broken link. The result of an abort are only dangling objects.
2850 Defaults to false. If not set, the value of `transfer.fsckObjects`
2853 receive.fsck.<msg-id>::
2854 When `receive.fsckObjects` is set to true, errors can be switched
2855 to warnings and vice versa by configuring the `receive.fsck.<msg-id>`
2856 setting where the `<msg-id>` is the fsck message ID and the value
2857 is one of `error`, `warn` or `ignore`. For convenience, fsck prefixes
2858 the error/warning with the message ID, e.g. "missingEmail: invalid
2859 author/committer line - missing email" means that setting
2860 `receive.fsck.missingEmail = ignore` will hide that issue.
2862 This feature is intended to support working with legacy repositories
2863 which would not pass pushing when `receive.fsckObjects = true`, allowing
2864 the host to accept repositories with certain known issues but still catch
2867 receive.fsck.skipList::
2868 The path to a sorted list of object names (i.e. one SHA-1 per
2869 line) that are known to be broken in a non-fatal way and should
2870 be ignored. This feature is useful when an established project
2871 should be accepted despite early commits containing errors that
2872 can be safely ignored such as invalid committer email addresses.
2873 Note: corrupt objects cannot be skipped with this setting.
2876 After receiving the pack from the client, `receive-pack` may
2877 produce no output (if `--quiet` was specified) while processing
2878 the pack, causing some networks to drop the TCP connection.
2879 With this option set, if `receive-pack` does not transmit
2880 any data in this phase for `receive.keepAlive` seconds, it will
2881 send a short keepalive packet. The default is 5 seconds; set
2882 to 0 to disable keepalives entirely.
2884 receive.unpackLimit::
2885 If the number of objects received in a push is below this
2886 limit then the objects will be unpacked into loose object
2887 files. However if the number of received objects equals or
2888 exceeds this limit then the received pack will be stored as
2889 a pack, after adding any missing delta bases. Storing the
2890 pack from a push can make the push operation complete faster,
2891 especially on slow filesystems. If not set, the value of
2892 `transfer.unpackLimit` is used instead.
2894 receive.maxInputSize::
2895 If the size of the incoming pack stream is larger than this
2896 limit, then git-receive-pack will error out, instead of
2897 accepting the pack file. If not set or set to 0, then the size
2900 receive.denyDeletes::
2901 If set to true, git-receive-pack will deny a ref update that deletes
2902 the ref. Use this to prevent such a ref deletion via a push.
2904 receive.denyDeleteCurrent::
2905 If set to true, git-receive-pack will deny a ref update that
2906 deletes the currently checked out branch of a non-bare repository.
2908 receive.denyCurrentBranch::
2909 If set to true or "refuse", git-receive-pack will deny a ref update
2910 to the currently checked out branch of a non-bare repository.
2911 Such a push is potentially dangerous because it brings the HEAD
2912 out of sync with the index and working tree. If set to "warn",
2913 print a warning of such a push to stderr, but allow the push to
2914 proceed. If set to false or "ignore", allow such pushes with no
2915 message. Defaults to "refuse".
2917 Another option is "updateInstead" which will update the working
2918 tree if pushing into the current branch. This option is
2919 intended for synchronizing working directories when one side is not easily
2920 accessible via interactive ssh (e.g. a live web site, hence the requirement
2921 that the working directory be clean). This mode also comes in handy when
2922 developing inside a VM to test and fix code on different Operating Systems.
2924 By default, "updateInstead" will refuse the push if the working tree or
2925 the index have any difference from the HEAD, but the `push-to-checkout`
2926 hook can be used to customize this. See linkgit:githooks[5].
2928 receive.denyNonFastForwards::
2929 If set to true, git-receive-pack will deny a ref update which is
2930 not a fast-forward. Use this to prevent such an update via a push,
2931 even if that push is forced. This configuration variable is
2932 set when initializing a shared repository.
2935 This variable is the same as `transfer.hideRefs`, but applies
2936 only to `receive-pack` (and so affects pushes, but not fetches).
2937 An attempt to update or delete a hidden ref by `git push` is
2940 receive.updateServerInfo::
2941 If set to true, git-receive-pack will run git-update-server-info
2942 after receiving data from git-push and updating refs.
2944 receive.shallowUpdate::
2945 If set to true, .git/shallow can be updated when new refs
2946 require new shallow roots. Otherwise those refs are rejected.
2948 remote.pushDefault::
2949 The remote to push to by default. Overrides
2950 `branch.<name>.remote` for all branches, and is overridden by
2951 `branch.<name>.pushRemote` for specific branches.
2954 The URL of a remote repository. See linkgit:git-fetch[1] or
2955 linkgit:git-push[1].
2957 remote.<name>.pushurl::
2958 The push URL of a remote repository. See linkgit:git-push[1].
2960 remote.<name>.proxy::
2961 For remotes that require curl (http, https and ftp), the URL to
2962 the proxy to use for that remote. Set to the empty string to
2963 disable proxying for that remote.
2965 remote.<name>.proxyAuthMethod::
2966 For remotes that require curl (http, https and ftp), the method to use for
2967 authenticating against the proxy in use (probably set in
2968 `remote.<name>.proxy`). See `http.proxyAuthMethod`.
2970 remote.<name>.fetch::
2971 The default set of "refspec" for linkgit:git-fetch[1]. See
2972 linkgit:git-fetch[1].
2974 remote.<name>.push::
2975 The default set of "refspec" for linkgit:git-push[1]. See
2976 linkgit:git-push[1].
2978 remote.<name>.mirror::
2979 If true, pushing to this remote will automatically behave
2980 as if the `--mirror` option was given on the command line.
2982 remote.<name>.skipDefaultUpdate::
2983 If true, this remote will be skipped by default when updating
2984 using linkgit:git-fetch[1] or the `update` subcommand of
2985 linkgit:git-remote[1].
2987 remote.<name>.skipFetchAll::
2988 If true, this remote will be skipped by default when updating
2989 using linkgit:git-fetch[1] or the `update` subcommand of
2990 linkgit:git-remote[1].
2992 remote.<name>.receivepack::
2993 The default program to execute on the remote side when pushing. See
2994 option --receive-pack of linkgit:git-push[1].
2996 remote.<name>.uploadpack::
2997 The default program to execute on the remote side when fetching. See
2998 option --upload-pack of linkgit:git-fetch-pack[1].
3000 remote.<name>.tagOpt::
3001 Setting this value to --no-tags disables automatic tag following when
3002 fetching from remote <name>. Setting it to --tags will fetch every
3003 tag from remote <name>, even if they are not reachable from remote
3004 branch heads. Passing these flags directly to linkgit:git-fetch[1] can
3005 override this setting. See options --tags and --no-tags of
3006 linkgit:git-fetch[1].
3009 Setting this to a value <vcs> will cause Git to interact with
3010 the remote with the git-remote-<vcs> helper.
3012 remote.<name>.prune::
3013 When set to true, fetching from this remote by default will also
3014 remove any remote-tracking references that no longer exist on the
3015 remote (as if the `--prune` option was given on the command line).
3016 Overrides `fetch.prune` settings, if any.
3018 remote.<name>.pruneTags::
3019 When set to true, fetching from this remote by default will also
3020 remove any local tags that no longer exist on the remote if pruning
3021 is activated in general via `remote.<name>.prune`, `fetch.prune` or
3022 `--prune`. Overrides `fetch.pruneTags` settings, if any.
3024 See also `remote.<name>.prune` and the PRUNING section of
3025 linkgit:git-fetch[1].
3028 The list of remotes which are fetched by "git remote update
3029 <group>". See linkgit:git-remote[1].
3031 repack.useDeltaBaseOffset::
3032 By default, linkgit:git-repack[1] creates packs that use
3033 delta-base offset. If you need to share your repository with
3034 Git older than version 1.4.4, either directly or via a dumb
3035 protocol such as http, then you need to set this option to
3036 "false" and repack. Access from old Git versions over the
3037 native protocol are unaffected by this option.
3039 repack.packKeptObjects::
3040 If set to true, makes `git repack` act as if
3041 `--pack-kept-objects` was passed. See linkgit:git-repack[1] for
3042 details. Defaults to `false` normally, but `true` if a bitmap
3043 index is being written (either via `--write-bitmap-index` or
3044 `repack.writeBitmaps`).
3046 repack.writeBitmaps::
3047 When true, git will write a bitmap index when packing all
3048 objects to disk (e.g., when `git repack -a` is run). This
3049 index can speed up the "counting objects" phase of subsequent
3050 packs created for clones and fetches, at the cost of some disk
3051 space and extra time spent on the initial repack. This has
3052 no effect if multiple packfiles are created.
3056 When set to true, `git-rerere` updates the index with the
3057 resulting contents after it cleanly resolves conflicts using
3058 previously recorded resolution. Defaults to false.
3061 Activate recording of resolved conflicts, so that identical
3062 conflict hunks can be resolved automatically, should they be
3063 encountered again. By default, linkgit:git-rerere[1] is
3064 enabled if there is an `rr-cache` directory under the
3065 `$GIT_DIR`, e.g. if "rerere" was previously used in the
3068 sendemail.identity::
3069 A configuration identity. When given, causes values in the
3070 'sendemail.<identity>' subsection to take precedence over
3071 values in the 'sendemail' section. The default identity is
3072 the value of `sendemail.identity`.
3074 sendemail.smtpEncryption::
3075 See linkgit:git-send-email[1] for description. Note that this
3076 setting is not subject to the 'identity' mechanism.
3078 sendemail.smtpssl (deprecated)::
3079 Deprecated alias for 'sendemail.smtpEncryption = ssl'.
3081 sendemail.smtpsslcertpath::
3082 Path to ca-certificates (either a directory or a single file).
3083 Set it to an empty string to disable certificate verification.
3085 sendemail.<identity>.*::
3086 Identity-specific versions of the 'sendemail.*' parameters
3087 found below, taking precedence over those when this
3088 identity is selected, through either the command-line or
3089 `sendemail.identity`.
3091 sendemail.aliasesFile::
3092 sendemail.aliasFileType::
3093 sendemail.annotate::
3097 sendemail.chainReplyTo::
3099 sendemail.envelopeSender::
3101 sendemail.multiEdit::
3102 sendemail.signedoffbycc::
3103 sendemail.smtpPass::
3104 sendemail.suppresscc::
3105 sendemail.suppressFrom::
3108 sendemail.smtpDomain::
3109 sendemail.smtpServer::
3110 sendemail.smtpServerPort::
3111 sendemail.smtpServerOption::
3112 sendemail.smtpUser::
3114 sendemail.transferEncoding::
3115 sendemail.validate::
3117 See linkgit:git-send-email[1] for description.
3119 sendemail.signedoffcc (deprecated)::
3120 Deprecated alias for `sendemail.signedoffbycc`.
3122 sendemail.smtpBatchSize::
3123 Number of messages to be sent per connection, after that a relogin
3124 will happen. If the value is 0 or undefined, send all messages in
3126 See also the `--batch-size` option of linkgit:git-send-email[1].
3128 sendemail.smtpReloginDelay::
3129 Seconds wait before reconnecting to smtp server.
3130 See also the `--relogin-delay` option of linkgit:git-send-email[1].
3132 showbranch.default::
3133 The default set of branches for linkgit:git-show-branch[1].
3134 See linkgit:git-show-branch[1].
3136 splitIndex.maxPercentChange::
3137 When the split index feature is used, this specifies the
3138 percent of entries the split index can contain compared to the
3139 total number of entries in both the split index and the shared
3140 index before a new shared index is written.
3141 The value should be between 0 and 100. If the value is 0 then
3142 a new shared index is always written, if it is 100 a new
3143 shared index is never written.
3144 By default the value is 20, so a new shared index is written
3145 if the number of entries in the split index would be greater
3146 than 20 percent of the total number of entries.
3147 See linkgit:git-update-index[1].
3149 splitIndex.sharedIndexExpire::
3150 When the split index feature is used, shared index files that
3151 were not modified since the time this variable specifies will
3152 be removed when a new shared index file is created. The value
3153 "now" expires all entries immediately, and "never" suppresses
3154 expiration altogether.
3155 The default value is "2.weeks.ago".
3156 Note that a shared index file is considered modified (for the
3157 purpose of expiration) each time a new split-index file is
3158 either created based on it or read from it.
3159 See linkgit:git-update-index[1].
3161 status.relativePaths::
3162 By default, linkgit:git-status[1] shows paths relative to the
3163 current directory. Setting this variable to `false` shows paths
3164 relative to the repository root (this was the default for Git
3168 Set to true to enable --short by default in linkgit:git-status[1].
3169 The option --no-short takes precedence over this variable.
3172 Set to true to enable --branch by default in linkgit:git-status[1].
3173 The option --no-branch takes precedence over this variable.
3175 status.displayCommentPrefix::
3176 If set to true, linkgit:git-status[1] will insert a comment
3177 prefix before each output line (starting with
3178 `core.commentChar`, i.e. `#` by default). This was the
3179 behavior of linkgit:git-status[1] in Git 1.8.4 and previous.
3182 status.renameLimit::
3183 The number of files to consider when performing rename detection
3184 in linkgit:git-status[1] and linkgit:git-commit[1]. Defaults to
3185 the value of diff.renameLimit.
3188 Whether and how Git detects renames in linkgit:git-status[1] and
3189 linkgit:git-commit[1] . If set to "false", rename detection is
3190 disabled. If set to "true", basic rename detection is enabled.
3191 If set to "copies" or "copy", Git will detect copies, as well.
3192 Defaults to the value of diff.renames.
3195 If set to true, linkgit:git-status[1] will display the number of
3196 entries currently stashed away.
3199 status.showUntrackedFiles::
3200 By default, linkgit:git-status[1] and linkgit:git-commit[1] show
3201 files which are not currently tracked by Git. Directories which
3202 contain only untracked files, are shown with the directory name
3203 only. Showing untracked files means that Git needs to lstat() all
3204 the files in the whole repository, which might be slow on some
3205 systems. So, this variable controls how the commands displays
3206 the untracked files. Possible values are:
3209 * `no` - Show no untracked files.
3210 * `normal` - Show untracked files and directories.
3211 * `all` - Show also individual files in untracked directories.
3214 If this variable is not specified, it defaults to 'normal'.
3215 This variable can be overridden with the -u|--untracked-files option
3216 of linkgit:git-status[1] and linkgit:git-commit[1].
3218 status.submoduleSummary::
3220 If this is set to a non zero number or true (identical to -1 or an
3221 unlimited number), the submodule summary will be enabled and a
3222 summary of commits for modified submodules will be shown (see
3223 --summary-limit option of linkgit:git-submodule[1]). Please note
3224 that the summary output command will be suppressed for all
3225 submodules when `diff.ignoreSubmodules` is set to 'all' or only
3226 for those submodules where `submodule.<name>.ignore=all`. The only
3227 exception to that rule is that status and commit will show staged
3228 submodule changes. To
3229 also view the summary for ignored submodules you can either use
3230 the --ignore-submodules=dirty command-line option or the 'git
3231 submodule summary' command, which shows a similar output but does
3232 not honor these settings.
3235 If this is set to true, the `git stash show` command without an
3236 option will show the stash entry in patch form. Defaults to false.
3237 See description of 'show' command in linkgit:git-stash[1].
3240 If this is set to true, the `git stash show` command without an
3241 option will show diffstat of the stash entry. Defaults to true.
3242 See description of 'show' command in linkgit:git-stash[1].
3244 submodule.<name>.url::
3245 The URL for a submodule. This variable is copied from the .gitmodules
3246 file to the git config via 'git submodule init'. The user can change
3247 the configured URL before obtaining the submodule via 'git submodule
3248 update'. If neither submodule.<name>.active or submodule.active are
3249 set, the presence of this variable is used as a fallback to indicate
3250 whether the submodule is of interest to git commands.
3251 See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
3253 submodule.<name>.update::
3254 The method by which a submodule is updated by 'git submodule update',
3255 which is the only affected command, others such as
3256 'git checkout --recurse-submodules' are unaffected. It exists for
3257 historical reasons, when 'git submodule' was the only command to
3258 interact with submodules; settings like `submodule.active`
3259 and `pull.rebase` are more specific. It is populated by
3260 `git submodule init` from the linkgit:gitmodules[5] file.
3261 See description of 'update' command in linkgit:git-submodule[1].
3263 submodule.<name>.branch::
3264 The remote branch name for a submodule, used by `git submodule
3265 update --remote`. Set this option to override the value found in
3266 the `.gitmodules` file. See linkgit:git-submodule[1] and
3267 linkgit:gitmodules[5] for details.
3269 submodule.<name>.fetchRecurseSubmodules::
3270 This option can be used to control recursive fetching of this
3271 submodule. It can be overridden by using the --[no-]recurse-submodules
3272 command-line option to "git fetch" and "git pull".
3273 This setting will override that from in the linkgit:gitmodules[5]
3276 submodule.<name>.ignore::
3277 Defines under what circumstances "git status" and the diff family show
3278 a submodule as modified. When set to "all", it will never be considered
3279 modified (but it will nonetheless show up in the output of status and
3280 commit when it has been staged), "dirty" will ignore all changes
3281 to the submodules work tree and
3282 takes only differences between the HEAD of the submodule and the commit
3283 recorded in the superproject into account. "untracked" will additionally
3284 let submodules with modified tracked files in their work tree show up.
3285 Using "none" (the default when this option is not set) also shows
3286 submodules that have untracked files in their work tree as changed.
3287 This setting overrides any setting made in .gitmodules for this submodule,
3288 both settings can be overridden on the command line by using the
3289 "--ignore-submodules" option. The 'git submodule' commands are not
3290 affected by this setting.
3292 submodule.<name>.active::
3293 Boolean value indicating if the submodule is of interest to git
3294 commands. This config option takes precedence over the
3295 submodule.active config option.
3298 A repeated field which contains a pathspec used to match against a
3299 submodule's path to determine if the submodule is of interest to git
3303 Specifies if commands recurse into submodules by default. This
3304 applies to all commands that have a `--recurse-submodules` option,
3308 submodule.fetchJobs::
3309 Specifies how many submodules are fetched/cloned at the same time.
3310 A positive integer allows up to that number of submodules fetched
3311 in parallel. A value of 0 will give some reasonable default.
3312 If unset, it defaults to 1.
3314 submodule.alternateLocation::
3315 Specifies how the submodules obtain alternates when submodules are
3316 cloned. Possible values are `no`, `superproject`.
3317 By default `no` is assumed, which doesn't add references. When the
3318 value is set to `superproject` the submodule to be cloned computes
3319 its alternates location relative to the superprojects alternate.
3321 submodule.alternateErrorStrategy::
3322 Specifies how to treat errors with the alternates for a submodule
3323 as computed via `submodule.alternateLocation`. Possible values are
3324 `ignore`, `info`, `die`. Default is `die`.
3326 tag.forceSignAnnotated::
3327 A boolean to specify whether annotated tags created should be GPG signed.
3328 If `--annotate` is specified on the command line, it takes
3329 precedence over this option.
3332 This variable controls the sort ordering of tags when displayed by
3333 linkgit:git-tag[1]. Without the "--sort=<value>" option provided, the
3334 value of this variable will be used as the default.
3337 This variable can be used to restrict the permission bits of
3338 tar archive entries. The default is 0002, which turns off the
3339 world write bit. The special value "user" indicates that the
3340 archiving user's umask will be used instead. See umask(2) and
3341 linkgit:git-archive[1].
3343 transfer.fsckObjects::
3344 When `fetch.fsckObjects` or `receive.fsckObjects` are
3345 not set, the value of this variable is used instead.
3349 String(s) `receive-pack` and `upload-pack` use to decide which
3350 refs to omit from their initial advertisements. Use more than
3351 one definition to specify multiple prefix strings. A ref that is
3352 under the hierarchies listed in the value of this variable is
3353 excluded, and is hidden when responding to `git push` or `git
3354 fetch`. See `receive.hideRefs` and `uploadpack.hideRefs` for
3355 program-specific versions of this config.
3357 You may also include a `!` in front of the ref name to negate the entry,
3358 explicitly exposing it, even if an earlier entry marked it as hidden.
3359 If you have multiple hideRefs values, later entries override earlier ones
3360 (and entries in more-specific config files override less-specific ones).
3362 If a namespace is in use, the namespace prefix is stripped from each
3363 reference before it is matched against `transfer.hiderefs` patterns.
3364 For example, if `refs/heads/master` is specified in `transfer.hideRefs` and
3365 the current namespace is `foo`, then `refs/namespaces/foo/refs/heads/master`
3366 is omitted from the advertisements but `refs/heads/master` and
3367 `refs/namespaces/bar/refs/heads/master` are still advertised as so-called
3368 "have" lines. In order to match refs before stripping, add a `^` in front of
3369 the ref name. If you combine `!` and `^`, `!` must be specified first.
3371 Even if you hide refs, a client may still be able to steal the target
3372 objects via the techniques described in the "SECURITY" section of the
3373 linkgit:gitnamespaces[7] man page; it's best to keep private data in a
3374 separate repository.
3376 transfer.unpackLimit::
3377 When `fetch.unpackLimit` or `receive.unpackLimit` are
3378 not set, the value of this variable is used instead.
3379 The default value is 100.
3381 uploadarchive.allowUnreachable::
3382 If true, allow clients to use `git archive --remote` to request
3383 any tree, whether reachable from the ref tips or not. See the
3384 discussion in the "SECURITY" section of
3385 linkgit:git-upload-archive[1] for more details. Defaults to
3388 uploadpack.hideRefs::
3389 This variable is the same as `transfer.hideRefs`, but applies
3390 only to `upload-pack` (and so affects only fetches, not pushes).
3391 An attempt to fetch a hidden ref by `git fetch` will fail. See
3392 also `uploadpack.allowTipSHA1InWant`.
3394 uploadpack.allowTipSHA1InWant::
3395 When `uploadpack.hideRefs` is in effect, allow `upload-pack`
3396 to accept a fetch request that asks for an object at the tip
3397 of a hidden ref (by default, such a request is rejected).
3398 See also `uploadpack.hideRefs`. Even if this is false, a client
3399 may be able to steal objects via the techniques described in the
3400 "SECURITY" section of the linkgit:gitnamespaces[7] man page; it's
3401 best to keep private data in a separate repository.
3403 uploadpack.allowReachableSHA1InWant::
3404 Allow `upload-pack` to accept a fetch request that asks for an
3405 object that is reachable from any ref tip. However, note that
3406 calculating object reachability is computationally expensive.
3407 Defaults to `false`. Even if this is false, a client may be able
3408 to steal objects via the techniques described in the "SECURITY"
3409 section of the linkgit:gitnamespaces[7] man page; it's best to
3410 keep private data in a separate repository.
3412 uploadpack.allowAnySHA1InWant::
3413 Allow `upload-pack` to accept a fetch request that asks for any
3415 Defaults to `false`.
3417 uploadpack.keepAlive::
3418 When `upload-pack` has started `pack-objects`, there may be a
3419 quiet period while `pack-objects` prepares the pack. Normally
3420 it would output progress information, but if `--quiet` was used
3421 for the fetch, `pack-objects` will output nothing at all until
3422 the pack data begins. Some clients and networks may consider
3423 the server to be hung and give up. Setting this option instructs
3424 `upload-pack` to send an empty keepalive packet every
3425 `uploadpack.keepAlive` seconds. Setting this option to 0
3426 disables keepalive packets entirely. The default is 5 seconds.
3428 uploadpack.packObjectsHook::
3429 If this option is set, when `upload-pack` would run
3430 `git pack-objects` to create a packfile for a client, it will
3431 run this shell command instead. The `pack-objects` command and
3432 arguments it _would_ have run (including the `git pack-objects`
3433 at the beginning) are appended to the shell command. The stdin
3434 and stdout of the hook are treated as if `pack-objects` itself
3435 was run. I.e., `upload-pack` will feed input intended for
3436 `pack-objects` to the hook, and expects a completed packfile on
3439 uploadpack.allowFilter::
3440 If this option is set, `upload-pack` will support partial
3441 clone and partial fetch object filtering.
3443 Note that this configuration variable is ignored if it is seen in the
3444 repository-level config (this is a safety measure against fetching from
3445 untrusted repositories).
3447 url.<base>.insteadOf::
3448 Any URL that starts with this value will be rewritten to
3449 start, instead, with <base>. In cases where some site serves a
3450 large number of repositories, and serves them with multiple
3451 access methods, and some users need to use different access
3452 methods, this feature allows people to specify any of the
3453 equivalent URLs and have Git automatically rewrite the URL to
3454 the best alternative for the particular user, even for a
3455 never-before-seen repository on the site. When more than one
3456 insteadOf strings match a given URL, the longest match is used.
3458 Note that any protocol restrictions will be applied to the rewritten
3459 URL. If the rewrite changes the URL to use a custom protocol or remote
3460 helper, you may need to adjust the `protocol.*.allow` config to permit
3461 the request. In particular, protocols you expect to use for submodules
3462 must be set to `always` rather than the default of `user`. See the
3463 description of `protocol.allow` above.
3465 url.<base>.pushInsteadOf::
3466 Any URL that starts with this value will not be pushed to;
3467 instead, it will be rewritten to start with <base>, and the
3468 resulting URL will be pushed to. In cases where some site serves
3469 a large number of repositories, and serves them with multiple
3470 access methods, some of which do not allow push, this feature
3471 allows people to specify a pull-only URL and have Git
3472 automatically use an appropriate URL to push, even for a
3473 never-before-seen repository on the site. When more than one
3474 pushInsteadOf strings match a given URL, the longest match is
3475 used. If a remote has an explicit pushurl, Git will ignore this
3476 setting for that remote.
3479 Your email address to be recorded in any newly created commits.
3480 Can be overridden by the `GIT_AUTHOR_EMAIL`, `GIT_COMMITTER_EMAIL`, and
3481 `EMAIL` environment variables. See linkgit:git-commit-tree[1].
3484 Your full name to be recorded in any newly created commits.
3485 Can be overridden by the `GIT_AUTHOR_NAME` and `GIT_COMMITTER_NAME`
3486 environment variables. See linkgit:git-commit-tree[1].
3488 user.useConfigOnly::
3489 Instruct Git to avoid trying to guess defaults for `user.email`
3490 and `user.name`, and instead retrieve the values only from the
3491 configuration. For example, if you have multiple email addresses
3492 and would like to use a different one for each repository, then
3493 with this configuration option set to `true` in the global config
3494 along with a name, Git will prompt you to set up an email before
3495 making new commits in a newly cloned repository.
3496 Defaults to `false`.
3499 If linkgit:git-tag[1] or linkgit:git-commit[1] is not selecting the
3500 key you want it to automatically when creating a signed tag or
3501 commit, you can override the default selection with this variable.
3502 This option is passed unchanged to gpg's --local-user parameter,
3503 so you may specify a key using any method that gpg supports.
3505 versionsort.prereleaseSuffix (deprecated)::
3506 Deprecated alias for `versionsort.suffix`. Ignored if
3507 `versionsort.suffix` is set.
3509 versionsort.suffix::
3510 Even when version sort is used in linkgit:git-tag[1], tagnames
3511 with the same base version but different suffixes are still sorted
3512 lexicographically, resulting e.g. in prerelease tags appearing
3513 after the main release (e.g. "1.0-rc1" after "1.0"). This
3514 variable can be specified to determine the sorting order of tags
3515 with different suffixes.
3517 By specifying a single suffix in this variable, any tagname containing
3518 that suffix will appear before the corresponding main release. E.g. if
3519 the variable is set to "-rc", then all "1.0-rcX" tags will appear before
3520 "1.0". If specified multiple times, once per suffix, then the order of
3521 suffixes in the configuration will determine the sorting order of tagnames
3522 with those suffixes. E.g. if "-pre" appears before "-rc" in the
3523 configuration, then all "1.0-preX" tags will be listed before any
3524 "1.0-rcX" tags. The placement of the main release tag relative to tags
3525 with various suffixes can be determined by specifying the empty suffix
3526 among those other suffixes. E.g. if the suffixes "-rc", "", "-ck" and
3527 "-bfs" appear in the configuration in this order, then all "v4.8-rcX" tags
3528 are listed first, followed by "v4.8", then "v4.8-ckX" and finally
3531 If more than one suffixes match the same tagname, then that tagname will
3532 be sorted according to the suffix which starts at the earliest position in
3533 the tagname. If more than one different matching suffixes start at
3534 that earliest position, then that tagname will be sorted according to the
3535 longest of those suffixes.
3536 The sorting order between different suffixes is undefined if they are
3537 in multiple config files.
3540 Specify a web browser that may be used by some commands.
3541 Currently only linkgit:git-instaweb[1] and linkgit:git-help[1]
3544 worktree.guessRemote::
3545 With `add`, if no branch argument, and neither of `-b` nor
3546 `-B` nor `--detach` are given, the command defaults to
3547 creating a new branch from HEAD. If `worktree.guessRemote` is
3548 set to true, `worktree add` tries to find a remote-tracking
3549 branch whose name uniquely matches the new branch name. If
3550 such a branch exists, it is checked out and set as "upstream"
3551 for the new branch. If no such match can be found, it falls
3552 back to creating a new branch from the current HEAD.