git.oblomov.eu Git - git/blob - git-rebase.sh

   1 #!/bin/sh
   2 #
   3 # Copyright (c) 2005 Junio C Hamano.
   4 #
   5
   6 USAGE='[--interactive | -i] [-v] [--force-rebase | -f] [--no-ff] [--onto <newbase>] (<upstream>|--root) [<branch>] [--quiet | -q]'
   7 LONG_USAGE='git-rebase replaces <branch> with a new branch of the
   8 same name.  When the --onto option is provided the new branch starts
   9 out with a HEAD equal to <newbase>, otherwise it is equal to <upstream>
  10 It then attempts to create a new commit for each commit from the original
  11 <branch> that does not exist in the <upstream> branch.
  12
  13 It is possible that a merge failure will prevent this process from being
  14 completely automatic.  You will have to resolve any such merge failure
  15 and run git rebase --continue.  Another option is to bypass the commit
  16 that caused the merge failure with git rebase --skip.  To restore the
  17 original <branch> and remove the .git/rebase-apply working files, use the
  18 command git rebase --abort instead.
  19
  20 Note that if <branch> is not specified on the command line, the
  21 currently checked out branch is used.
  22
  23 Example:       git-rebase master~1 topic
  24
  25         A---B---C topic                   A'\''--B'\''--C'\'' topic
  26        /                   -->           /
  27   D---E---F---G master          D---E---F---G master
  28 '
  29
  30 SUBDIRECTORY_OK=Yes
  31 OPTIONS_SPEC=
  32 . git-sh-setup
  33 set_reflog_action rebase
  34 require_work_tree
  35 cd_to_toplevel
  36
  37 LF='
  38 '
  39 OK_TO_SKIP_PRE_REBASE=
  40 RESOLVEMSG="
  41 When you have resolved this problem run \"git rebase --continue\".
  42 If you would prefer to skip this patch, instead run \"git rebase --skip\".
  43 To restore the original branch and stop rebasing run \"git rebase --abort\".
  44 "
  45 unset newbase
  46 strategy=recursive
  47 strategy_opts=
  48 do_merge=
  49 dotest="$GIT_DIR"/rebase-merge
  50 prec=4
  51 verbose=
  52 diffstat=
  53 test "$(git config --bool rebase.stat)" = true && diffstat=t
  54 git_am_opt=
  55 rebase_root=
  56 force_rebase=
  57 allow_rerere_autoupdate=
  58
  59 continue_merge () {
  60         test -n "$prev_head" || die "prev_head must be defined"
  61         test -d "$dotest" || die "$dotest directory does not exist"
  62
  63         unmerged=$(git ls-files -u)
  64         if test -n "$unmerged"
  65         then
  66                 echo "You still have unmerged paths in your index"
  67                 echo "did you forget to use git add?"
  68                 die "$RESOLVEMSG"
  69         fi
  70
  71         cmt=`cat "$dotest/current"`
  72         if ! git diff-index --quiet --ignore-submodules HEAD --
  73         then
  74                 if ! git commit --no-verify -C "$cmt"
  75                 then
  76                         echo "Commit failed, please do not call \"git commit\""
  77                         echo "directly, but instead do one of the following: "
  78                         die "$RESOLVEMSG"
  79                 fi
  80                 if test -z "$GIT_QUIET"
  81                 then
  82                         printf "Committed: %0${prec}d " $msgnum
  83                 fi
  84                 echo "$cmt $(git rev-parse HEAD^0)" >> "$dotest/rewritten"
  85         else
  86                 if test -z "$GIT_QUIET"
  87                 then
  88                         printf "Already applied: %0${prec}d " $msgnum
  89                 fi
  90         fi
  91         test -z "$GIT_QUIET" &&
  92         GIT_PAGER='' git log --format=%s -1 "$cmt"
  93
  94         prev_head=`git rev-parse HEAD^0`
  95         # save the resulting commit so we can read-tree on it later
  96         echo "$prev_head" > "$dotest/prev_head"
  97
  98         # onto the next patch:
  99         msgnum=$(($msgnum + 1))
 100         echo "$msgnum" >"$dotest/msgnum"
 101 }
 102
 103 call_merge () {
 104         cmt="$(cat "$dotest/cmt.$1")"
 105         echo "$cmt" > "$dotest/current"
 106         hd=$(git rev-parse --verify HEAD)
 107         cmt_name=$(git symbolic-ref HEAD 2> /dev/null || echo HEAD)
 108         msgnum=$(cat "$dotest/msgnum")
 109         end=$(cat "$dotest/end")
 110         eval GITHEAD_$cmt='"${cmt_name##refs/heads/}~$(($end - $msgnum))"'
 111         eval GITHEAD_$hd='$(cat "$dotest/onto_name")'
 112         export GITHEAD_$cmt GITHEAD_$hd
 113         if test -n "$GIT_QUIET"
 114         then
 115                 GIT_MERGE_VERBOSITY=1 && export GIT_MERGE_VERBOSITY
 116         fi
 117         eval 'git-merge-$strategy' $strategy_opts '"$cmt^" -- "$hd" "$cmt"'
 118         rv=$?
 119         case "$rv" in
 120         0)
 121                 unset GITHEAD_$cmt GITHEAD_$hd
 122                 return
 123                 ;;
 124         1)
 125                 git rerere $allow_rerere_autoupdate
 126                 die "$RESOLVEMSG"
 127                 ;;
 128         2)
 129                 echo "Strategy: $rv $strategy failed, try another" 1>&2
 130                 die "$RESOLVEMSG"
 131                 ;;
 132         *)
 133                 die "Unknown exit code ($rv) from command:" \
 134                         "git-merge-$strategy $cmt^ -- HEAD $cmt"
 135                 ;;
 136         esac
 137 }
 138
 139 move_to_original_branch () {
 140         test -z "$head_name" &&
 141                 head_name="$(cat "$dotest"/head-name)" &&
 142                 onto="$(cat "$dotest"/onto)" &&
 143                 orig_head="$(cat "$dotest"/orig-head)"
 144         case "$head_name" in
 145         refs/*)
 146                 message="rebase finished: $head_name onto $onto"
 147                 git update-ref -m "$message" \
 148                         $head_name $(git rev-parse HEAD) $orig_head &&
 149                 git symbolic-ref HEAD $head_name ||
 150                 die "Could not move back to $head_name"
 151                 ;;
 152         esac
 153 }
 154
 155 finish_rb_merge () {
 156         move_to_original_branch
 157         git notes copy --for-rewrite=rebase < "$dotest"/rewritten
 158         if test -x "$GIT_DIR"/hooks/post-rewrite &&
 159                 test -s "$dotest"/rewritten; then
 160                 "$GIT_DIR"/hooks/post-rewrite rebase < "$dotest"/rewritten
 161         fi
 162         rm -r "$dotest"
 163         say All done.
 164 }
 165
 166 is_interactive () {
 167         while test $# != 0
 168         do
 169                 case "$1" in
 170                         -i|--interactive)
 171                                 interactive_rebase=explicit
 172                                 break
 173                         ;;
 174                         -p|--preserve-merges)
 175                                 interactive_rebase=implied
 176                         ;;
 177                 esac
 178                 shift
 179         done
 180
 181         if [ "$interactive_rebase" = implied ]; then
 182                 GIT_EDITOR=:
 183                 export GIT_EDITOR
 184         fi
 185
 186         test -n "$interactive_rebase" || test -f "$dotest"/interactive
 187 }
 188
 189 run_pre_rebase_hook () {
 190         if test -z "$OK_TO_SKIP_PRE_REBASE" &&
 191            test -x "$GIT_DIR/hooks/pre-rebase"
 192         then
 193                 "$GIT_DIR/hooks/pre-rebase" ${1+"$@"} ||
 194                 die "The pre-rebase hook refused to rebase."
 195         fi
 196 }
 197
 198 test -f "$GIT_DIR"/rebase-apply/applying &&
 199         die 'It looks like git-am is in progress. Cannot rebase.'
 200
 201 is_interactive "$@" && exec git-rebase--interactive "$@"
 202
 203 while test $# != 0
 204 do
 205         case "$1" in
 206         --no-verify)
 207                 OK_TO_SKIP_PRE_REBASE=yes
 208                 ;;
 209         --verify)
 210                 OK_TO_SKIP_PRE_REBASE=
 211                 ;;
 212         --continue)
 213                 test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
 214                         die "No rebase in progress?"
 215
 216                 git update-index --ignore-submodules --refresh &&
 217                 git diff-files --quiet --ignore-submodules || {
 218                         echo "You must edit all merge conflicts and then"
 219                         echo "mark them as resolved using git add"
 220                         exit 1
 221                 }
 222                 if test -d "$dotest"
 223                 then
 224                         prev_head=$(cat "$dotest/prev_head")
 225                         end=$(cat "$dotest/end")
 226                         msgnum=$(cat "$dotest/msgnum")
 227                         onto=$(cat "$dotest/onto")
 228                         GIT_QUIET=$(cat "$dotest/quiet")
 229                         continue_merge
 230                         while test "$msgnum" -le "$end"
 231                         do
 232                                 call_merge "$msgnum"
 233                                 continue_merge
 234                         done
 235                         finish_rb_merge
 236                         exit
 237                 fi
 238                 head_name=$(cat "$GIT_DIR"/rebase-apply/head-name) &&
 239                 onto=$(cat "$GIT_DIR"/rebase-apply/onto) &&
 240                 orig_head=$(cat "$GIT_DIR"/rebase-apply/orig-head) &&
 241                 GIT_QUIET=$(cat "$GIT_DIR"/rebase-apply/quiet)
 242                 git am --resolved --3way --resolvemsg="$RESOLVEMSG" &&
 243                 move_to_original_branch
 244                 exit
 245                 ;;
 246         --skip)
 247                 test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
 248                         die "No rebase in progress?"
 249
 250                 git reset --hard HEAD || exit $?
 251                 if test -d "$dotest"
 252                 then
 253                         git rerere clear
 254                         prev_head=$(cat "$dotest/prev_head")
 255                         end=$(cat "$dotest/end")
 256                         msgnum=$(cat "$dotest/msgnum")
 257                         msgnum=$(($msgnum + 1))
 258                         onto=$(cat "$dotest/onto")
 259                         GIT_QUIET=$(cat "$dotest/quiet")
 260                         while test "$msgnum" -le "$end"
 261                         do
 262                                 call_merge "$msgnum"
 263                                 continue_merge
 264                         done
 265                         finish_rb_merge
 266                         exit
 267                 fi
 268                 head_name=$(cat "$GIT_DIR"/rebase-apply/head-name) &&
 269                 onto=$(cat "$GIT_DIR"/rebase-apply/onto) &&
 270                 orig_head=$(cat "$GIT_DIR"/rebase-apply/orig-head) &&
 271                 GIT_QUIET=$(cat "$GIT_DIR"/rebase-apply/quiet)
 272                 git am -3 --skip --resolvemsg="$RESOLVEMSG" &&
 273                 move_to_original_branch
 274                 exit
 275                 ;;
 276         --abort)
 277                 test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
 278                         die "No rebase in progress?"
 279
 280                 git rerere clear
 281
 282                 test -d "$dotest" || dotest="$GIT_DIR"/rebase-apply
 283
 284                 head_name="$(cat "$dotest"/head-name)" &&
 285                 case "$head_name" in
 286                 refs/*)
 287                         git symbolic-ref HEAD $head_name ||
 288                         die "Could not move back to $head_name"
 289                         ;;
 290                 esac
 291                 git reset --hard $(cat "$dotest/orig-head")
 292                 rm -r "$dotest"
 293                 exit
 294                 ;;
 295         --onto)
 296                 test 2 -le "$#" || usage
 297                 newbase="$2"
 298                 shift
 299                 ;;
 300         -M|-m|--m|--me|--mer|--merg|--merge)
 301                 do_merge=t
 302                 ;;
 303         -X*|--strategy-option*)
 304                 case "$#,$1" in
 305                 1,-X|1,--strategy-option)
 306                         usage ;;
 307                 *,-X|*,--strategy-option)
 308                         newopt="$2"
 309                         shift ;;
 310                 *,--strategy-option=*)
 311                         newopt="$(expr " $1" : ' --strategy-option=\(.*\)')" ;;
 312                 *,-X*)
 313                         newopt="$(expr " $1" : ' -X\(.*\)')" ;;
 314                 1,*)
 315                         usage ;;
 316                 esac
 317                 strategy_opts="$strategy_opts $(git rev-parse --sq-quote "--$newopt")"
 318                 do_merge=t
 319                 ;;
 320         -s=*|--s=*|--st=*|--str=*|--stra=*|--strat=*|--strate=*|\
 321                 --strateg=*|--strategy=*|\
 322         -s|--s|--st|--str|--stra|--strat|--strate|--strateg|--strategy)
 323                 case "$#,$1" in
 324                 *,*=*)
 325                         strategy=`expr "z$1" : 'z-[^=]*=\(.*\)'` ;;
 326                 1,*)
 327                         usage ;;
 328                 *)
 329                         strategy="$2"
 330                         shift ;;
 331                 esac
 332                 do_merge=t
 333                 ;;
 334         -n|--no-stat)
 335                 diffstat=
 336                 ;;
 337         --stat)
 338                 diffstat=t
 339                 ;;
 340         -v|--verbose)
 341                 verbose=t
 342                 diffstat=t
 343                 GIT_QUIET=
 344                 ;;
 345         -q|--quiet)
 346                 GIT_QUIET=t
 347                 git_am_opt="$git_am_opt -q"
 348                 verbose=
 349                 diffstat=
 350                 ;;
 351         --whitespace=*)
 352                 git_am_opt="$git_am_opt $1"
 353                 case "$1" in
 354                 --whitespace=fix|--whitespace=strip)
 355                         force_rebase=t
 356                         ;;
 357                 esac
 358                 ;;
 359         --ignore-whitespace)
 360                 git_am_opt="$git_am_opt $1"
 361                 ;;
 362         --committer-date-is-author-date|--ignore-date)
 363                 git_am_opt="$git_am_opt $1"
 364                 force_rebase=t
 365                 ;;
 366         -C*)
 367                 git_am_opt="$git_am_opt $1"
 368                 ;;
 369         --root)
 370                 rebase_root=t
 371                 ;;
 372         -f|--f|--fo|--for|--forc|--force|--force-r|--force-re|--force-reb|--force-reba|--force-rebas|--force-rebase|--no-ff)
 373                 force_rebase=t
 374                 ;;
 375         --rerere-autoupdate|--no-rerere-autoupdate)
 376                 allow_rerere_autoupdate="$1"
 377                 ;;
 378         -*)
 379                 usage
 380                 ;;
 381         *)
 382                 break
 383                 ;;
 384         esac
 385         shift
 386 done
 387 test $# -gt 2 && usage
 388
 389 if test $# -eq 0 && test -z "$rebase_root"
 390 then
 391         test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply || usage
 392         test -d "$dotest" -o -f "$GIT_DIR"/rebase-apply/rebasing &&
 393                 die 'A rebase is in progress, try --continue, --skip or --abort.'
 394 fi
 395
 396 # Make sure we do not have $GIT_DIR/rebase-apply
 397 if test -z "$do_merge"
 398 then
 399         if mkdir "$GIT_DIR"/rebase-apply 2>/dev/null
 400         then
 401                 rmdir "$GIT_DIR"/rebase-apply
 402         else
 403                 echo >&2 '
 404 It seems that I cannot create a rebase-apply directory, and
 405 I wonder if you are in the middle of patch application or another
 406 rebase.  If that is not the case, please
 407         rm -fr '"$GIT_DIR"'/rebase-apply
 408 and run me again.  I am stopping in case you still have something
 409 valuable there.'
 410                 exit 1
 411         fi
 412 else
 413         if test -d "$dotest"
 414         then
 415                 die "previous rebase directory $dotest still exists." \
 416                         'Try git rebase (--continue | --abort | --skip)'
 417         fi
 418 fi
 419
 420 require_clean_work_tree "rebase" "Please commit or stash them."
 421
 422 if test -z "$rebase_root"
 423 then
 424         # The upstream head must be given.  Make sure it is valid.
 425         upstream_name="$1"
 426         shift
 427         upstream=`git rev-parse --verify "${upstream_name}^0"` ||
 428         die "invalid upstream $upstream_name"
 429         unset root_flag
 430         upstream_arg="$upstream_name"
 431 else
 432         test -z "$newbase" && die "--root must be used with --onto"
 433         unset upstream_name
 434         unset upstream
 435         root_flag="--root"
 436         upstream_arg="$root_flag"
 437 fi
 438
 439 # Make sure the branch to rebase onto is valid.
 440 onto_name=${newbase-"$upstream_name"}
 441 case "$onto_name" in
 442 *...*)
 443         if      left=${onto_name%...*} right=${onto_name#*...} &&
 444                 onto=$(git merge-base --all ${left:-HEAD} ${right:-HEAD})
 445         then
 446                 case "$onto" in
 447                 ?*"$LF"?*)
 448                         die "$onto_name: there are more than one merge bases"
 449                         ;;
 450                 '')
 451                         die "$onto_name: there is no merge base"
 452                         ;;
 453                 esac
 454         else
 455                 die "$onto_name: there is no merge base"
 456         fi
 457         ;;
 458 *)
 459         onto=$(git rev-parse --verify "${onto_name}^0") || exit
 460         ;;
 461 esac
 462
 463 # If a hook exists, give it a chance to interrupt
 464 run_pre_rebase_hook "$upstream_arg" "$@"
 465
 466 # If the branch to rebase is given, that is the branch we will rebase
 467 # $branch_name -- branch being rebased, or HEAD (already detached)
 468 # $orig_head -- commit object name of tip of the branch before rebasing
 469 # $head_name -- refs/heads/<that-branch> or "detached HEAD"
 470 switch_to=
 471 case "$#" in
 472 1)
 473         # Is it "rebase other $branchname" or "rebase other $commit"?
 474         branch_name="$1"
 475         switch_to="$1"
 476
 477         if git show-ref --verify --quiet -- "refs/heads/$1" &&
 478            branch=$(git rev-parse -q --verify "refs/heads/$1")
 479         then
 480                 head_name="refs/heads/$1"
 481         elif branch=$(git rev-parse -q --verify "$1")
 482         then
 483                 head_name="detached HEAD"
 484         else
 485                 echo >&2 "fatal: no such branch: $1"
 486                 usage
 487         fi
 488         ;;
 489 *)
 490         # Do not need to switch branches, we are already on it.
 491         if branch_name=`git symbolic-ref -q HEAD`
 492         then
 493                 head_name=$branch_name
 494                 branch_name=`expr "z$branch_name" : 'zrefs/heads/\(.*\)'`
 495         else
 496                 head_name="detached HEAD"
 497                 branch_name=HEAD ;# detached
 498         fi
 499         branch=$(git rev-parse --verify "${branch_name}^0") || exit
 500         ;;
 501 esac
 502 orig_head=$branch
 503
 504 # Now we are rebasing commits $upstream..$branch (or with --root,
 505 # everything leading up to $branch) on top of $onto
 506
 507 # Check if we are already based on $onto with linear history,
 508 # but this should be done only when upstream and onto are the same.
 509 mb=$(git merge-base "$onto" "$branch")
 510 if test "$upstream" = "$onto" && test "$mb" = "$onto" &&
 511         # linear history?
 512         ! (git rev-list --parents "$onto".."$branch" | sane_grep " .* ") > /dev/null
 513 then
 514         if test -z "$force_rebase"
 515         then
 516                 # Lazily switch to the target branch if needed...
 517                 test -z "$switch_to" || git checkout "$switch_to" --
 518                 say "Current branch $branch_name is up to date."
 519                 exit 0
 520         else
 521                 say "Current branch $branch_name is up to date, rebase forced."
 522         fi
 523 fi
 524
 525 # Detach HEAD and reset the tree
 526 say "First, rewinding head to replay your work on top of it..."
 527 git checkout -q "$onto^0" || die "could not detach HEAD"
 528 git update-ref ORIG_HEAD $branch
 529
 530 if test -n "$diffstat"
 531 then
 532         if test -n "$verbose"
 533         then
 534                 echo "Changes from $mb to $onto:"
 535         fi
 536         # We want color (if set), but no pager
 537         GIT_PAGER='' git diff --stat --summary "$mb" "$onto"
 538 fi
 539
 540 # If the $onto is a proper descendant of the tip of the branch, then
 541 # we just fast-forwarded.
 542 if test "$mb" = "$branch"
 543 then
 544         say "Fast-forwarded $branch_name to $onto_name."
 545         move_to_original_branch
 546         exit 0
 547 fi
 548
 549 if test -n "$rebase_root"
 550 then
 551         revisions="$onto..$orig_head"
 552 else
 553         revisions="$upstream..$orig_head"
 554 fi
 555
 556 if test -z "$do_merge"
 557 then
 558         git format-patch -k --stdout --full-index --ignore-if-in-upstream \
 559                 --src-prefix=a/ --dst-prefix=b/ \
 560                 --no-renames $root_flag "$revisions" |
 561         git am $git_am_opt --rebasing --resolvemsg="$RESOLVEMSG" &&
 562         move_to_original_branch
 563         ret=$?
 564         test 0 != $ret -a -d "$GIT_DIR"/rebase-apply &&
 565                 echo $head_name > "$GIT_DIR"/rebase-apply/head-name &&
 566                 echo $onto > "$GIT_DIR"/rebase-apply/onto &&
 567                 echo $orig_head > "$GIT_DIR"/rebase-apply/orig-head &&
 568                 echo "$GIT_QUIET" > "$GIT_DIR"/rebase-apply/quiet
 569         exit $ret
 570 fi
 571
 572 # start doing a rebase with git-merge
 573 # this is rename-aware if the recursive (default) strategy is used
 574
 575 mkdir -p "$dotest"
 576 echo "$onto" > "$dotest/onto"
 577 echo "$onto_name" > "$dotest/onto_name"
 578 prev_head=$orig_head
 579 echo "$prev_head" > "$dotest/prev_head"
 580 echo "$orig_head" > "$dotest/orig-head"
 581 echo "$head_name" > "$dotest/head-name"
 582 echo "$GIT_QUIET" > "$dotest/quiet"
 583
 584 msgnum=0
 585 for cmt in `git rev-list --reverse --no-merges "$revisions"`
 586 do
 587         msgnum=$(($msgnum + 1))
 588         echo "$cmt" > "$dotest/cmt.$msgnum"
 589 done
 590
 591 echo 1 >"$dotest/msgnum"
 592 echo $msgnum >"$dotest/end"
 593
 594 end=$msgnum
 595 msgnum=1
 596
 597 while test "$msgnum" -le "$end"
 598 do
 599         call_merge "$msgnum"
 600         continue_merge
 601 done
 602
 603 finish_rb_merge