git.oblomov.eu Git - git/blob - t/perf/perf-lib.sh

   1 # Performance testing framework.  Each perf script starts much like
   2 # a normal test script, except it sources this library instead of
   3 # test-lib.sh.  See t/perf/README for documentation.
   4 #
   5 # Copyright (c) 2011 Thomas Rast
   6 #
   7 # This program is free software: you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation, either version 2 of the License, or
  10 # (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program.  If not, see http://www.gnu.org/licenses/ .
  19
  20 # do the --tee work early; it otherwise confuses our careful
  21 # GIT_BUILD_DIR mangling
  22 case "$GIT_TEST_TEE_STARTED, $* " in
  23 done,*)
  24         # do not redirect again
  25         ;;
  26 *' --tee '*|*' --va'*)
  27         mkdir -p test-results
  28         BASE=test-results/$(basename "$0" .sh)
  29         (GIT_TEST_TEE_STARTED=done ${SHELL-sh} "$0" "$@" 2>&1;
  30          echo $? > $BASE.exit) | tee $BASE.out
  31         test "$(cat $BASE.exit)" = 0
  32         exit
  33         ;;
  34 esac
  35
  36 TEST_DIRECTORY=$(pwd)/..
  37 TEST_OUTPUT_DIRECTORY=$(pwd)
  38 if test -z "$GIT_TEST_INSTALLED"; then
  39         perf_results_prefix=
  40 else
  41         perf_results_prefix=$(printf "%s" "${GIT_TEST_INSTALLED%/bin-wrappers}" | tr -c "[a-zA-Z0-9]" "[_*]")"."
  42         # make the tested dir absolute
  43         GIT_TEST_INSTALLED=$(cd "$GIT_TEST_INSTALLED" && pwd)
  44 fi
  45
  46 TEST_NO_CREATE_REPO=t
  47 TEST_NO_MALLOC_CHECK=t
  48
  49 . ../test-lib.sh
  50
  51 # Variables from test-lib that are normally internal to the tests; we
  52 # need to export them for test_perf subshells
  53 export TEST_DIRECTORY TRASH_DIRECTORY GIT_BUILD_DIR GIT_TEST_CMP
  54
  55 MODERN_GIT=$GIT_BUILD_DIR/bin-wrappers/git
  56 export MODERN_GIT
  57
  58 perf_results_dir=$TEST_OUTPUT_DIRECTORY/test-results
  59 test -n "$GIT_PERF_SUBSECTION" && perf_results_dir="$perf_results_dir/$GIT_PERF_SUBSECTION"
  60 mkdir -p "$perf_results_dir"
  61 rm -f "$perf_results_dir"/$(basename "$0" .sh).subtests
  62
  63 die_if_build_dir_not_repo () {
  64         if ! ( cd "$TEST_DIRECTORY/.." &&
  65                     git rev-parse --build-dir >/dev/null 2>&1 ); then
  66                 error "No $1 defined, and your build directory is not a repo"
  67         fi
  68 }
  69
  70 if test -z "$GIT_PERF_REPO"; then
  71         die_if_build_dir_not_repo '$GIT_PERF_REPO'
  72         GIT_PERF_REPO=$TEST_DIRECTORY/..
  73 fi
  74 if test -z "$GIT_PERF_LARGE_REPO"; then
  75         die_if_build_dir_not_repo '$GIT_PERF_LARGE_REPO'
  76         GIT_PERF_LARGE_REPO=$TEST_DIRECTORY/..
  77 fi
  78
  79 test_perf_do_repo_symlink_config_ () {
  80         test_have_prereq SYMLINKS || git config core.symlinks false
  81 }
  82
  83 test_perf_create_repo_from () {
  84         test "$#" = 2 ||
  85         error "bug in the test script: not 2 parameters to test-create-repo"
  86         repo="$1"
  87         source="$2"
  88         source_git="$("$MODERN_GIT" -C "$source" rev-parse --git-dir)"
  89         objects_dir="$("$MODERN_GIT" -C "$source" rev-parse --git-path objects)"
  90         mkdir -p "$repo/.git"
  91         (
  92                 cd "$source" &&
  93                 { cp -Rl "$objects_dir" "$repo/.git/" 2>/dev/null ||
  94                         cp -R "$objects_dir" "$repo/.git/"; } &&
  95                 for stuff in "$source_git"/*; do
  96                         case "$stuff" in
  97                                 */objects|*/hooks|*/config|*/commondir)
  98                                         ;;
  99                                 *)
 100                                         cp -R "$stuff" "$repo/.git/" || exit 1
 101                                         ;;
 102                         esac
 103                 done
 104         ) &&
 105         (
 106                 cd "$repo" &&
 107                 "$MODERN_GIT" init -q &&
 108                 test_perf_do_repo_symlink_config_ &&
 109                 mv .git/hooks .git/hooks-disabled 2>/dev/null &&
 110                 if test -f .git/index.lock
 111                 then
 112                         # We may be copying a repo that can't run "git
 113                         # status" due to a locked index. Since we have
 114                         # a copy it's fine to remove the lock.
 115                         rm .git/index.lock
 116                 fi
 117         ) || error "failed to copy repository '$source' to '$repo'"
 118 }
 119
 120 # call at least one of these to establish an appropriately-sized repository
 121 test_perf_fresh_repo () {
 122         repo="${1:-$TRASH_DIRECTORY}"
 123         "$MODERN_GIT" init -q "$repo" &&
 124         (
 125                 cd "$repo" &&
 126                 test_perf_do_repo_symlink_config_
 127         )
 128 }
 129
 130 test_perf_default_repo () {
 131         test_perf_create_repo_from "${1:-$TRASH_DIRECTORY}" "$GIT_PERF_REPO"
 132 }
 133 test_perf_large_repo () {
 134         if test "$GIT_PERF_LARGE_REPO" = "$GIT_BUILD_DIR"; then
 135                 echo "warning: \$GIT_PERF_LARGE_REPO is \$GIT_BUILD_DIR." >&2
 136                 echo "warning: This will work, but may not be a sufficiently large repo" >&2
 137                 echo "warning: for representative measurements." >&2
 138         fi
 139         test_perf_create_repo_from "${1:-$TRASH_DIRECTORY}" "$GIT_PERF_LARGE_REPO"
 140 }
 141 test_checkout_worktree () {
 142         git checkout-index -u -a ||
 143         error "git checkout-index failed"
 144 }
 145
 146 # Performance tests should never fail.  If they do, stop immediately
 147 immediate=t
 148
 149 # Perf tests require GNU time
 150 case "$(uname -s)" in Darwin) GTIME="${GTIME:-gtime}";; esac
 151 GTIME="${GTIME:-/usr/bin/time}"
 152
 153 test_run_perf_ () {
 154         test_cleanup=:
 155         test_export_="test_cleanup"
 156         export test_cleanup test_export_
 157         "$GTIME" -f "%E %U %S" -o test_time.$i "$SHELL" -c '
 158 . '"$TEST_DIRECTORY"/test-lib-functions.sh'
 159 test_export () {
 160         [ $# != 0 ] || return 0
 161         test_export_="$test_export_\\|$1"
 162         shift
 163         test_export "$@"
 164 }
 165 '"$1"'
 166 ret=$?
 167 set | sed -n "s'"/'/'\\\\''/g"';s/^\\($test_export_\\)/export '"'&'"'/p" >test_vars
 168 exit $ret' >&3 2>&4
 169         eval_ret=$?
 170
 171         if test $eval_ret = 0 || test -n "$expecting_failure"
 172         then
 173                 test_eval_ "$test_cleanup"
 174                 . ./test_vars || error "failed to load updated environment"
 175         fi
 176         if test "$verbose" = "t" && test -n "$HARNESS_ACTIVE"; then
 177                 echo ""
 178         fi
 179         return "$eval_ret"
 180 }
 181
 182
 183 test_perf () {
 184         test_start_
 185         test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq=
 186         test "$#" = 2 ||
 187         error "bug in the test script: not 2 or 3 parameters to test-expect-success"
 188         export test_prereq
 189         if ! test_skip "$@"
 190         then
 191                 base=$(basename "$0" .sh)
 192                 echo "$test_count" >>"$perf_results_dir"/$base.subtests
 193                 echo "$1" >"$perf_results_dir"/$base.$test_count.descr
 194                 if test -z "$verbose"; then
 195                         printf "%s" "perf $test_count - $1:"
 196                 else
 197                         echo "perf $test_count - $1:"
 198                 fi
 199                 for i in $(test_seq 1 $GIT_PERF_REPEAT_COUNT); do
 200                         say >&3 "running: $2"
 201                         if test_run_perf_ "$2"
 202                         then
 203                                 if test -z "$verbose"; then
 204                                         printf " %s" "$i"
 205                                 else
 206                                         echo "* timing run $i/$GIT_PERF_REPEAT_COUNT:"
 207                                 fi
 208                         else
 209                                 test -z "$verbose" && echo
 210                                 test_failure_ "$@"
 211                                 break
 212                         fi
 213                 done
 214                 if test -z "$verbose"; then
 215                         echo " ok"
 216                 else
 217                         test_ok_ "$1"
 218                 fi
 219                 base="$perf_results_dir"/"$perf_results_prefix$(basename "$0" .sh)"."$test_count"
 220                 "$TEST_DIRECTORY"/perf/min_time.perl test_time.* >"$base".times
 221         fi
 222         test_finish_
 223 }
 224
 225 # We extend test_done to print timings at the end (./run disables this
 226 # and does it after running everything)
 227 test_at_end_hook_ () {
 228         if test -z "$GIT_PERF_AGGREGATING_LATER"; then
 229                 ( cd "$TEST_DIRECTORY"/perf && ./aggregate.perl $(basename "$0") )
 230         fi
 231 }
 232
 233 test_export () {
 234         export "$@"
 235 }