git.oblomov.eu Git - git/blob - git-bisect.sh

   1 #!/bin/sh
   2
   3 USAGE='[help|start|bad|good|new|old|terms|skip|next|reset|visualize|view|replay|log|run]'
   4 LONG_USAGE='git bisect help
   5         print this long help message.
   6 git bisect start [--term-{new,bad}=<term> --term-{old,good}=<term>]
   7                  [--no-checkout] [--first-parent] [<bad> [<good>...]] [--] [<pathspec>...]
   8         reset bisect state and start bisection.
   9 git bisect (bad|new) [<rev>]
  10         mark <rev> a known-bad revision/
  11                 a revision after change in a given property.
  12 git bisect (good|old) [<rev>...]
  13         mark <rev>... known-good revisions/
  14                 revisions before change in a given property.
  15 git bisect terms [--term-good | --term-bad]
  16         show the terms used for old and new commits (default: bad, good)
  17 git bisect skip [(<rev>|<range>)...]
  18         mark <rev>... untestable revisions.
  19 git bisect next
  20         find next bisection to test and check it out.
  21 git bisect reset [<commit>]
  22         finish bisection search and go back to commit.
  23 git bisect (visualize|view)
  24         show bisect status in gitk.
  25 git bisect replay <logfile>
  26         replay bisection log.
  27 git bisect log
  28         show bisect log.
  29 git bisect run <cmd>...
  30         use <cmd>... to automatically bisect.
  31
  32 Please use "git help bisect" to get the full man page.'
  33
  34 OPTIONS_SPEC=
  35 . git-sh-setup
  36
  37 _x40='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
  38 _x40="$_x40$_x40$_x40$_x40$_x40$_x40$_x40$_x40"
  39 TERM_BAD=bad
  40 TERM_GOOD=good
  41
  42 bisect_head()
  43 {
  44         if git rev-parse --verify -q BISECT_HEAD > /dev/null
  45         then
  46                 echo BISECT_HEAD
  47         else
  48                 echo HEAD
  49         fi
  50 }
  51
  52 bisect_start() {
  53         git bisect--helper --bisect-start $@ || exit
  54
  55         #
  56         # Change state.
  57         # In case of mistaken revs or checkout error, or signals received,
  58         # "bisect_auto_next" below may exit or misbehave.
  59         # We have to trap this to be able to clean up using
  60         # "bisect_clean_state".
  61         #
  62         trap 'git bisect--helper --bisect-clean-state' 0
  63         trap 'exit 255' 1 2 3 15
  64
  65         #
  66         # Check if we can proceed to the next bisect state.
  67         #
  68         git bisect--helper --bisect-auto-next || exit
  69
  70         trap '-' 0
  71 }
  72
  73 bisect_skip() {
  74         all=''
  75         for arg in "$@"
  76         do
  77                 case "$arg" in
  78                 *..*)
  79                         revs=$(git rev-list "$arg") || die "$(eval_gettext "Bad rev input: \$arg")" ;;
  80                 *)
  81                         revs=$(git rev-parse --sq-quote "$arg") ;;
  82                 esac
  83                 all="$all $revs"
  84         done
  85         eval bisect_state 'skip' $all
  86 }
  87
  88 bisect_state() {
  89         git bisect--helper --bisect-autostart || exit
  90         state=$1
  91         git bisect--helper --check-and-set-terms $state $TERM_GOOD $TERM_BAD || exit
  92         get_terms
  93         case "$#,$state" in
  94         0,*)
  95                 die "Please call 'bisect_state' with at least one argument." ;;
  96         1,"$TERM_BAD"|1,"$TERM_GOOD"|1,skip)
  97                 bisected_head=$(bisect_head)
  98                 rev=$(git rev-parse --verify "$bisected_head") ||
  99                         die "$(eval_gettext "Bad rev input: \$bisected_head")"
 100                 git bisect--helper --bisect-write "$state" "$rev" "$TERM_GOOD" "$TERM_BAD" || exit
 101                 git bisect--helper --check-expected-revs "$rev" ;;
 102         2,"$TERM_BAD"|*,"$TERM_GOOD"|*,skip)
 103                 shift
 104                 hash_list=''
 105                 for rev in "$@"
 106                 do
 107                         sha=$(git rev-parse --verify "$rev^{commit}") ||
 108                                 die "$(eval_gettext "Bad rev input: \$rev")"
 109                         hash_list="$hash_list $sha"
 110                 done
 111                 for rev in $hash_list
 112                 do
 113                         git bisect--helper --bisect-write "$state" "$rev" "$TERM_GOOD" "$TERM_BAD" || exit
 114                 done
 115                 git bisect--helper --check-expected-revs $hash_list ;;
 116         *,"$TERM_BAD")
 117                 die "$(eval_gettext "'git bisect \$TERM_BAD' can take only one argument.")" ;;
 118         *)
 119                 usage ;;
 120         esac
 121         git bisect--helper --bisect-auto-next
 122 }
 123
 124 bisect_visualize() {
 125         git bisect--helper --bisect-next-check $TERM_GOOD $TERM_BAD fail || exit
 126
 127         if test $# = 0
 128         then
 129                 if test -n "${DISPLAY+set}${SESSIONNAME+set}${MSYSTEM+set}${SECURITYSESSIONID+set}" &&
 130                         type gitk >/dev/null 2>&1
 131                 then
 132                         set gitk
 133                 else
 134                         set git log
 135                 fi
 136         else
 137                 case "$1" in
 138                 git*|tig) ;;
 139                 -*)     set git log "$@" ;;
 140                 *)      set git "$@" ;;
 141                 esac
 142         fi
 143
 144         eval '"$@"' --bisect -- $(cat "$GIT_DIR/BISECT_NAMES")
 145 }
 146
 147 bisect_replay () {
 148         file="$1"
 149         test "$#" -eq 1 || die "$(gettext "No logfile given")"
 150         test -r "$file" || die "$(eval_gettext "cannot read \$file for replaying")"
 151         git bisect--helper --bisect-reset || exit
 152         oIFS="$IFS" IFS="$IFS$(printf '\015')"
 153         while read git bisect command rev tail
 154         do
 155                 test "$git $bisect" = "git bisect" || test "$git" = "git-bisect" || continue
 156                 if test "$git" = "git-bisect"
 157                 then
 158                         rev="$command"
 159                         command="$bisect"
 160                 fi
 161                 get_terms
 162                 git bisect--helper --check-and-set-terms "$command" "$TERM_GOOD" "$TERM_BAD" || exit
 163                 get_terms
 164                 case "$command" in
 165                 start)
 166                         cmd="bisect_start $rev $tail"
 167                         eval "$cmd" ;;
 168                 "$TERM_GOOD"|"$TERM_BAD"|skip)
 169                         git bisect--helper --bisect-write "$command" "$rev" "$TERM_GOOD" "$TERM_BAD" || exit;;
 170                 terms)
 171                         git bisect--helper --bisect-terms $rev || exit;;
 172                 *)
 173                         die "$(gettext "?? what are you talking about?")" ;;
 174                 esac
 175         done <"$file"
 176         IFS="$oIFS"
 177         git bisect--helper --bisect-auto-next || exit
 178 }
 179
 180 bisect_run () {
 181         git bisect--helper --bisect-next-check $TERM_GOOD $TERM_BAD fail || exit
 182
 183         test -n "$*" || die "$(gettext "bisect run failed: no command provided.")"
 184
 185         while true
 186         do
 187                 command="$@"
 188                 eval_gettextln "running \$command"
 189                 "$@"
 190                 res=$?
 191
 192                 # Check for really bad run error.
 193                 if [ $res -lt 0 -o $res -ge 128 ]
 194                 then
 195                         eval_gettextln "bisect run failed:
 196 exit code \$res from '\$command' is < 0 or >= 128" >&2
 197                         exit $res
 198                 fi
 199
 200                 # Find current state depending on run success or failure.
 201                 # A special exit code of 125 means cannot test.
 202                 if [ $res -eq 125 ]
 203                 then
 204                         state='skip'
 205                 elif [ $res -gt 0 ]
 206                 then
 207                         state="$TERM_BAD"
 208                 else
 209                         state="$TERM_GOOD"
 210                 fi
 211
 212                 # We have to use a subshell because "bisect_state" can exit.
 213                 ( bisect_state $state >"$GIT_DIR/BISECT_RUN" )
 214                 res=$?
 215
 216                 cat "$GIT_DIR/BISECT_RUN"
 217
 218                 if sane_grep "first $TERM_BAD commit could be any of" "$GIT_DIR/BISECT_RUN" \
 219                         >/dev/null
 220                 then
 221                         gettextln "bisect run cannot continue any more" >&2
 222                         exit $res
 223                 fi
 224
 225                 if [ $res -ne 0 ]
 226                 then
 227                         eval_gettextln "bisect run failed:
 228 'bisect_state \$state' exited with error code \$res" >&2
 229                         exit $res
 230                 fi
 231
 232                 if sane_grep "is the first $TERM_BAD commit" "$GIT_DIR/BISECT_RUN" >/dev/null
 233                 then
 234                         gettextln "bisect run success"
 235                         exit 0;
 236                 fi
 237
 238         done
 239 }
 240
 241 bisect_log () {
 242         test -s "$GIT_DIR/BISECT_LOG" || die "$(gettext "We are not bisecting.")"
 243         cat "$GIT_DIR/BISECT_LOG"
 244 }
 245
 246 get_terms () {
 247         if test -s "$GIT_DIR/BISECT_TERMS"
 248         then
 249                 {
 250                 read TERM_BAD
 251                 read TERM_GOOD
 252                 } <"$GIT_DIR/BISECT_TERMS"
 253         fi
 254 }
 255
 256 case "$#" in
 257 0)
 258         usage ;;
 259 *)
 260         cmd="$1"
 261         get_terms
 262         shift
 263         case "$cmd" in
 264         help)
 265                 git bisect -h ;;
 266         start)
 267                 bisect_start "$@" ;;
 268         bad|good|new|old|"$TERM_BAD"|"$TERM_GOOD")
 269                 bisect_state "$cmd" "$@" ;;
 270         skip)
 271                 bisect_skip "$@" ;;
 272         next)
 273                 # Not sure we want "next" at the UI level anymore.
 274                 git bisect--helper --bisect-next "$@" || exit ;;
 275         visualize|view)
 276                 bisect_visualize "$@" ;;
 277         reset)
 278                 git bisect--helper --bisect-reset "$@" ;;
 279         replay)
 280                 bisect_replay "$@" ;;
 281         log)
 282                 bisect_log ;;
 283         run)
 284                 bisect_run "$@" ;;
 285         terms)
 286                 git bisect--helper --bisect-terms "$@" || exit;;
 287         *)
 288                 usage ;;
 289         esac
 290 esac