ocfs2: Enable xattr set in index btree

[linux-2.6] / fs / mpage.c

/*
 * fs/mpage.c
 *
 * Copyright (C) 2002, Linus Torvalds.
 *
 * Contains functions related to preparing and submitting BIOs which contain
 * multiple pagecache pages.
 *
 * 15May2002    akpm@zip.com.au
 *              Initial version
 * 27Jun2002    axboe@suse.de
 *              use bio_add_page() to build bio's just the right size
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/kdev_t.h>
#include <linux/bio.h>
#include <linux/fs.h>
#include <linux/buffer_head.h>
#include <linux/blkdev.h>
#include <linux/highmem.h>
#include <linux/prefetch.h>
#include <linux/mpage.h>
#include <linux/writeback.h>
#include <linux/backing-dev.h>
#include <linux/pagevec.h>

/*
 * I/O completion handler for multipage BIOs.
 *
 * The mpage code never puts partial pages into a BIO (except for end-of-file).
 * If a page does not map to a contiguous run of blocks then it simply falls
 * back to block_read_full_page().
 *
 * Why is this?  If a page's completion depends on a number of different BIOs
 * which can complete in any order (or at the same time) then determining the
 * status of that page is hard.  See end_buffer_async_read() for the details.
 * There is no point in duplicating all that complexity.
 */
static void mpage_end_io_read(struct bio *bio, int err)
{
        const int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
        struct bio_vec *bvec = bio->bi_io_vec + bio->bi_vcnt - 1;

        do {
                struct page *page = bvec->bv_page;

                if (--bvec >= bio->bi_io_vec)
                        prefetchw(&bvec->bv_page->flags);

                if (uptodate) {
                        SetPageUptodate(page);
                } else {
                        ClearPageUptodate(page);
                        SetPageError(page);
                }
                unlock_page(page);
        } while (bvec >= bio->bi_io_vec);
        bio_put(bio);
}

static void mpage_end_io_write(struct bio *bio, int err)
{
        const int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
        struct bio_vec *bvec = bio->bi_io_vec + bio->bi_vcnt - 1;

        do {
                struct page *page = bvec->bv_page;

                if (--bvec >= bio->bi_io_vec)
                        prefetchw(&bvec->bv_page->flags);

                if (!uptodate){
                        SetPageError(page);
                        if (page->mapping)
                                set_bit(AS_EIO, &page->mapping->flags);
                }
                end_page_writeback(page);
        } while (bvec >= bio->bi_io_vec);
        bio_put(bio);
}

struct bio *mpage_bio_submit(int rw, struct bio *bio)
{
        bio->bi_end_io = mpage_end_io_read;
        if (rw == WRITE)
                bio->bi_end_io = mpage_end_io_write;
        submit_bio(rw, bio);
        return NULL;
}
EXPORT_SYMBOL(mpage_bio_submit);

static struct bio *
mpage_alloc(struct block_device *bdev,
                sector_t first_sector, int nr_vecs,
                gfp_t gfp_flags)
{
        struct bio *bio;

        bio = bio_alloc(gfp_flags, nr_vecs);

        if (bio == NULL && (current->flags & PF_MEMALLOC)) {
                while (!bio && (nr_vecs /= 2))
                        bio = bio_alloc(gfp_flags, nr_vecs);
        }

        if (bio) {
                bio->bi_bdev = bdev;
                bio->bi_sector = first_sector;
        }
        return bio;
}

/*
 * support function for mpage_readpages.  The fs supplied get_block might
 * return an up to date buffer.  This is used to map that buffer into
 * the page, which allows readpage to avoid triggering a duplicate call
 * to get_block.
 *
 * The idea is to avoid adding buffers to pages that don't already have
 * them.  So when the buffer is up to date and the page size == block size,
 * this marks the page up to date instead of adding new buffers.
 */
static void 
map_buffer_to_page(struct page *page, struct buffer_head *bh, int page_block) 
{
        struct inode *inode = page->mapping->host;
        struct buffer_head *page_bh, *head;
        int block = 0;

        if (!page_has_buffers(page)) {
                /*
                 * don't make any buffers if there is only one buffer on
                 * the page and the page just needs to be set up to date
                 */
                if (inode->i_blkbits == PAGE_CACHE_SHIFT && 
                    buffer_uptodate(bh)) {
                        SetPageUptodate(page);    
                        return;
                }
                create_empty_buffers(page, 1 << inode->i_blkbits, 0);
        }
        head = page_buffers(page);
        page_bh = head;
        do {
                if (block == page_block) {
                        page_bh->b_state = bh->b_state;
                        page_bh->b_bdev = bh->b_bdev;
                        page_bh->b_blocknr = bh->b_blocknr;
                        break;
                }
                page_bh = page_bh->b_this_page;
                block++;
        } while (page_bh != head);
}

/*
 * This is the worker routine which does all the work of mapping the disk
 * blocks and constructs largest possible bios, submits them for IO if the
 * blocks are not contiguous on the disk.
 *
 * We pass a buffer_head back and forth and use its buffer_mapped() flag to
 * represent the validity of its disk mapping and to decide when to do the next
 * get_block() call.
 */
static struct bio *
do_mpage_readpage(struct bio *bio, struct page *page, unsigned nr_pages,
                sector_t *last_block_in_bio, struct buffer_head *map_bh,
                unsigned long *first_logical_block, get_block_t get_block)
{
        struct inode *inode = page->mapping->host;
        const unsigned blkbits = inode->i_blkbits;
        const unsigned blocks_per_page = PAGE_CACHE_SIZE >> blkbits;
        const unsigned blocksize = 1 << blkbits;
        sector_t block_in_file;
        sector_t last_block;
        sector_t last_block_in_file;
        sector_t blocks[MAX_BUF_PER_PAGE];
        unsigned page_block;
        unsigned first_hole = blocks_per_page;
        struct block_device *bdev = NULL;
        int length;
        int fully_mapped = 1;
        unsigned nblocks;
        unsigned relative_block;

        if (page_has_buffers(page))
                goto confused;

        block_in_file = (sector_t)page->index << (PAGE_CACHE_SHIFT - blkbits);
        last_block = block_in_file + nr_pages * blocks_per_page;
        last_block_in_file = (i_size_read(inode) + blocksize - 1) >> blkbits;
        if (last_block > last_block_in_file)
                last_block = last_block_in_file;
        page_block = 0;

        /*
         * Map blocks using the result from the previous get_blocks call first.
         */
        nblocks = map_bh->b_size >> blkbits;
        if (buffer_mapped(map_bh) && block_in_file > *first_logical_block &&
                        block_in_file < (*first_logical_block + nblocks)) {
                unsigned map_offset = block_in_file - *first_logical_block;
                unsigned last = nblocks - map_offset;

                for (relative_block = 0; ; relative_block++) {
                        if (relative_block == last) {
                                clear_buffer_mapped(map_bh);
                                break;
                        }
                        if (page_block == blocks_per_page)
                                break;
                        blocks[page_block] = map_bh->b_blocknr + map_offset +
                                                relative_block;
                        page_block++;
                        block_in_file++;
                }
                bdev = map_bh->b_bdev;
        }

        /*
         * Then do more get_blocks calls until we are done with this page.
         */
        map_bh->b_page = page;
        while (page_block < blocks_per_page) {
                map_bh->b_state = 0;
                map_bh->b_size = 0;

                if (block_in_file < last_block) {
                        map_bh->b_size = (last_block-block_in_file) << blkbits;
                        if (get_block(inode, block_in_file, map_bh, 0))
                                goto confused;
                        *first_logical_block = block_in_file;
                }

                if (!buffer_mapped(map_bh)) {
                        fully_mapped = 0;
                        if (first_hole == blocks_per_page)
                                first_hole = page_block;
                        page_block++;
                        block_in_file++;
                        clear_buffer_mapped(map_bh);
                        continue;
                }

                /* some filesystems will copy data into the page during
                 * the get_block call, in which case we don't want to
                 * read it again.  map_buffer_to_page copies the data
                 * we just collected from get_block into the page's buffers
                 * so readpage doesn't have to repeat the get_block call
                 */
                if (buffer_uptodate(map_bh)) {
                        map_buffer_to_page(page, map_bh, page_block);
                        goto confused;
                }
        
                if (first_hole != blocks_per_page)
                        goto confused;          /* hole -> non-hole */

                /* Contiguous blocks? */
                if (page_block && blocks[page_block-1] != map_bh->b_blocknr-1)
                        goto confused;
                nblocks = map_bh->b_size >> blkbits;
                for (relative_block = 0; ; relative_block++) {
                        if (relative_block == nblocks) {
                                clear_buffer_mapped(map_bh);
                                break;
                        } else if (page_block == blocks_per_page)
                                break;
                        blocks[page_block] = map_bh->b_blocknr+relative_block;
                        page_block++;
                        block_in_file++;
                }
                bdev = map_bh->b_bdev;
        }

        if (first_hole != blocks_per_page) {
                zero_user_segment(page, first_hole << blkbits, PAGE_CACHE_SIZE);
                if (first_hole == 0) {
                        SetPageUptodate(page);
                        unlock_page(page);
                        goto out;
                }
        } else if (fully_mapped) {
                SetPageMappedToDisk(page);
        }

        /*
         * This page will go to BIO.  Do we need to send this BIO off first?
         */
        if (bio && (*last_block_in_bio != blocks[0] - 1))
                bio = mpage_bio_submit(READ, bio);

alloc_new:
        if (bio == NULL) {
                bio = mpage_alloc(bdev, blocks[0] << (blkbits - 9),
                                min_t(int, nr_pages, bio_get_nr_vecs(bdev)),
                                GFP_KERNEL);
                if (bio == NULL)
                        goto confused;
        }

        length = first_hole << blkbits;
        if (bio_add_page(bio, page, length, 0) < length) {
                bio = mpage_bio_submit(READ, bio);
                goto alloc_new;
        }

        if (buffer_boundary(map_bh) || (first_hole != blocks_per_page))
                bio = mpage_bio_submit(READ, bio);
        else
                *last_block_in_bio = blocks[blocks_per_page - 1];
out:
        return bio;

confused:
        if (bio)
                bio = mpage_bio_submit(READ, bio);
        if (!PageUptodate(page))
                block_read_full_page(page, get_block);
        else
                unlock_page(page);
        goto out;
}

/**
 * mpage_readpages - populate an address space with some pages & start reads against them
 * @mapping: the address_space
 * @pages: The address of a list_head which contains the target pages.  These
 *   pages have their ->index populated and are otherwise uninitialised.
 *   The page at @pages->prev has the lowest file offset, and reads should be
 *   issued in @pages->prev to @pages->next order.
 * @nr_pages: The number of pages at *@pages
 * @get_block: The filesystem's block mapper function.
 *
 * This function walks the pages and the blocks within each page, building and
 * emitting large BIOs.
 *
 * If anything unusual happens, such as:
 *
 * - encountering a page which has buffers
 * - encountering a page which has a non-hole after a hole
 * - encountering a page with non-contiguous blocks
 *
 * then this code just gives up and calls the buffer_head-based read function.
 * It does handle a page which has holes at the end - that is a common case:
 * the end-of-file on blocksize < PAGE_CACHE_SIZE setups.
 *
 * BH_Boundary explanation:
 *
 * There is a problem.  The mpage read code assembles several pages, gets all
 * their disk mappings, and then submits them all.  That's fine, but obtaining
 * the disk mappings may require I/O.  Reads of indirect blocks, for example.
 *
 * So an mpage read of the first 16 blocks of an ext2 file will cause I/O to be
 * submitted in the following order:
 *      12 0 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16
 *
 * because the indirect block has to be read to get the mappings of blocks
 * 13,14,15,16.  Obviously, this impacts performance.
 *
 * So what we do it to allow the filesystem's get_block() function to set
 * BH_Boundary when it maps block 11.  BH_Boundary says: mapping of the block
 * after this one will require I/O against a block which is probably close to
 * this one.  So you should push what I/O you have currently accumulated.
 *
 * This all causes the disk requests to be issued in the correct order.
 */
int
mpage_readpages(struct address_space *mapping, struct list_head *pages,
                                unsigned nr_pages, get_block_t get_block)
{
        struct bio *bio = NULL;
        unsigned page_idx;
        sector_t last_block_in_bio = 0;
        struct buffer_head map_bh;
        unsigned long first_logical_block = 0;

        clear_buffer_mapped(&map_bh);
        for (page_idx = 0; page_idx < nr_pages; page_idx++) {
                struct page *page = list_entry(pages->prev, struct page, lru);

                prefetchw(&page->flags);
                list_del(&page->lru);
                if (!add_to_page_cache_lru(page, mapping,
                                        page->index, GFP_KERNEL)) {
                        bio = do_mpage_readpage(bio, page,
                                        nr_pages - page_idx,
                                        &last_block_in_bio, &map_bh,
                                        &first_logical_block,
                                        get_block);
                }
                page_cache_release(page);
        }
        BUG_ON(!list_empty(pages));
        if (bio)
                mpage_bio_submit(READ, bio);
        return 0;
}
EXPORT_SYMBOL(mpage_readpages);

/*
 * This isn't called much at all
 */
int mpage_readpage(struct page *page, get_block_t get_block)
{
        struct bio *bio = NULL;
        sector_t last_block_in_bio = 0;
        struct buffer_head map_bh;
        unsigned long first_logical_block = 0;

        clear_buffer_mapped(&map_bh);
        bio = do_mpage_readpage(bio, page, 1, &last_block_in_bio,
                        &map_bh, &first_logical_block, get_block);
        if (bio)
                mpage_bio_submit(READ, bio);
        return 0;
}
EXPORT_SYMBOL(mpage_readpage);

/*
 * Writing is not so simple.
 *
 * If the page has buffers then they will be used for obtaining the disk
 * mapping.  We only support pages which are fully mapped-and-dirty, with a
 * special case for pages which are unmapped at the end: end-of-file.
 *
 * If the page has no buffers (preferred) then the page is mapped here.
 *
 * If all blocks are found to be contiguous then the page can go into the
 * BIO.  Otherwise fall back to the mapping's writepage().
 * 
 * FIXME: This code wants an estimate of how many pages are still to be
 * written, so it can intelligently allocate a suitably-sized BIO.  For now,
 * just allocate full-size (16-page) BIOs.
 */

int __mpage_writepage(struct page *page, struct writeback_control *wbc,
                      void *data)
{
        struct mpage_data *mpd = data;
        struct bio *bio = mpd->bio;
        struct address_space *mapping = page->mapping;
        struct inode *inode = page->mapping->host;
        const unsigned blkbits = inode->i_blkbits;
        unsigned long end_index;
        const unsigned blocks_per_page = PAGE_CACHE_SIZE >> blkbits;
        sector_t last_block;
        sector_t block_in_file;
        sector_t blocks[MAX_BUF_PER_PAGE];
        unsigned page_block;
        unsigned first_unmapped = blocks_per_page;
        struct block_device *bdev = NULL;
        int boundary = 0;
        sector_t boundary_block = 0;
        struct block_device *boundary_bdev = NULL;
        int length;
        struct buffer_head map_bh;
        loff_t i_size = i_size_read(inode);
        int ret = 0;

        if (page_has_buffers(page)) {
                struct buffer_head *head = page_buffers(page);
                struct buffer_head *bh = head;

                /* If they're all mapped and dirty, do it */
                page_block = 0;
                do {
                        BUG_ON(buffer_locked(bh));
                        if (!buffer_mapped(bh)) {
                                /*
                                 * unmapped dirty buffers are created by
                                 * __set_page_dirty_buffers -> mmapped data
                                 */
                                if (buffer_dirty(bh))
                                        goto confused;
                                if (first_unmapped == blocks_per_page)
                                        first_unmapped = page_block;
                                continue;
                        }

                        if (first_unmapped != blocks_per_page)
                                goto confused;  /* hole -> non-hole */

                        if (!buffer_dirty(bh) || !buffer_uptodate(bh))
                                goto confused;
                        if (page_block) {
                                if (bh->b_blocknr != blocks[page_block-1] + 1)
                                        goto confused;
                        }
                        blocks[page_block++] = bh->b_blocknr;
                        boundary = buffer_boundary(bh);
                        if (boundary) {
                                boundary_block = bh->b_blocknr;
                                boundary_bdev = bh->b_bdev;
                        }
                        bdev = bh->b_bdev;
                } while ((bh = bh->b_this_page) != head);

                if (first_unmapped)
                        goto page_is_mapped;

                /*
                 * Page has buffers, but they are all unmapped. The page was
                 * created by pagein or read over a hole which was handled by
                 * block_read_full_page().  If this address_space is also
                 * using mpage_readpages then this can rarely happen.
                 */
                goto confused;
        }

        /*
         * The page has no buffers: map it to disk
         */
        BUG_ON(!PageUptodate(page));
        block_in_file = (sector_t)page->index << (PAGE_CACHE_SHIFT - blkbits);
        last_block = (i_size - 1) >> blkbits;
        map_bh.b_page = page;
        for (page_block = 0; page_block < blocks_per_page; ) {

                map_bh.b_state = 0;
                map_bh.b_size = 1 << blkbits;
                if (mpd->get_block(inode, block_in_file, &map_bh, 1))
                        goto confused;
                if (buffer_new(&map_bh))
                        unmap_underlying_metadata(map_bh.b_bdev,
                                                map_bh.b_blocknr);
                if (buffer_boundary(&map_bh)) {
                        boundary_block = map_bh.b_blocknr;
                        boundary_bdev = map_bh.b_bdev;
                }
                if (page_block) {
                        if (map_bh.b_blocknr != blocks[page_block-1] + 1)
                                goto confused;
                }
                blocks[page_block++] = map_bh.b_blocknr;
                boundary = buffer_boundary(&map_bh);
                bdev = map_bh.b_bdev;
                if (block_in_file == last_block)
                        break;
                block_in_file++;
        }
        BUG_ON(page_block == 0);

        first_unmapped = page_block;

page_is_mapped:
        end_index = i_size >> PAGE_CACHE_SHIFT;
        if (page->index >= end_index) {
                /*
                 * The page straddles i_size.  It must be zeroed out on each
                 * and every writepage invokation because it may be mmapped.
                 * "A file is mapped in multiples of the page size.  For a file
                 * that is not a multiple of the page size, the remaining memory
                 * is zeroed when mapped, and writes to that region are not
                 * written out to the file."
                 */
                unsigned offset = i_size & (PAGE_CACHE_SIZE - 1);

                if (page->index > end_index || !offset)
                        goto confused;
                zero_user_segment(page, offset, PAGE_CACHE_SIZE);
        }

        /*
         * This page will go to BIO.  Do we need to send this BIO off first?
         */
        if (bio && mpd->last_block_in_bio != blocks[0] - 1)
                bio = mpage_bio_submit(WRITE, bio);

alloc_new:
        if (bio == NULL) {
                bio = mpage_alloc(bdev, blocks[0] << (blkbits - 9),
                                bio_get_nr_vecs(bdev), GFP_NOFS|__GFP_HIGH);
                if (bio == NULL)
                        goto confused;
        }

        /*
         * Must try to add the page before marking the buffer clean or
         * the confused fail path above (OOM) will be very confused when
         * it finds all bh marked clean (i.e. it will not write anything)
         */
        length = first_unmapped << blkbits;
        if (bio_add_page(bio, page, length, 0) < length) {
                bio = mpage_bio_submit(WRITE, bio);
                goto alloc_new;
        }

        /*
         * OK, we have our BIO, so we can now mark the buffers clean.  Make
         * sure to only clean buffers which we know we'll be writing.
         */
        if (page_has_buffers(page)) {
                struct buffer_head *head = page_buffers(page);
                struct buffer_head *bh = head;
                unsigned buffer_counter = 0;

                do {
                        if (buffer_counter++ == first_unmapped)
                                break;
                        clear_buffer_dirty(bh);
                        bh = bh->b_this_page;
                } while (bh != head);

                /*
                 * we cannot drop the bh if the page is not uptodate
                 * or a concurrent readpage would fail to serialize with the bh
                 * and it would read from disk before we reach the platter.
                 */
                if (buffer_heads_over_limit && PageUptodate(page))
                        try_to_free_buffers(page);
        }

        BUG_ON(PageWriteback(page));
        set_page_writeback(page);
        unlock_page(page);
        if (boundary || (first_unmapped != blocks_per_page)) {
                bio = mpage_bio_submit(WRITE, bio);
                if (boundary_block) {
                        write_boundary_block(boundary_bdev,
                                        boundary_block, 1 << blkbits);
                }
        } else {
                mpd->last_block_in_bio = blocks[blocks_per_page - 1];
        }
        goto out;

confused:
        if (bio)
                bio = mpage_bio_submit(WRITE, bio);

        if (mpd->use_writepage) {
                ret = mapping->a_ops->writepage(page, wbc);
        } else {
                ret = -EAGAIN;
                goto out;
        }
        /*
         * The caller has a ref on the inode, so *mapping is stable
         */
        mapping_set_error(mapping, ret);
out:
        mpd->bio = bio;
        return ret;
}
EXPORT_SYMBOL(__mpage_writepage);

/**
 * mpage_writepages - walk the list of dirty pages of the given address space & writepage() all of them
 * @mapping: address space structure to write
 * @wbc: subtract the number of written pages from *@wbc->nr_to_write
 * @get_block: the filesystem's block mapper function.
 *             If this is NULL then use a_ops->writepage.  Otherwise, go
 *             direct-to-BIO.
 *
 * This is a library function, which implements the writepages()
 * address_space_operation.
 *
 * If a page is already under I/O, generic_writepages() skips it, even
 * if it's dirty.  This is desirable behaviour for memory-cleaning writeback,
 * but it is INCORRECT for data-integrity system calls such as fsync().  fsync()
 * and msync() need to guarantee that all the data which was dirty at the time
 * the call was made get new I/O started against them.  If wbc->sync_mode is
 * WB_SYNC_ALL then we were called for data integrity and we must wait for
 * existing IO to complete.
 */
int
mpage_writepages(struct address_space *mapping,
                struct writeback_control *wbc, get_block_t get_block)
{
        int ret;

        if (!get_block)
                ret = generic_writepages(mapping, wbc);
        else {
                struct mpage_data mpd = {
                        .bio = NULL,
                        .last_block_in_bio = 0,
                        .get_block = get_block,
                        .use_writepage = 1,
                };

                ret = write_cache_pages(mapping, wbc, __mpage_writepage, &mpd);
                if (mpd.bio)
                        mpage_bio_submit(WRITE, mpd.bio);
        }
        return ret;
}
EXPORT_SYMBOL(mpage_writepages);

int mpage_writepage(struct page *page, get_block_t get_block,
        struct writeback_control *wbc)
{
        struct mpage_data mpd = {
                .bio = NULL,
                .last_block_in_bio = 0,
                .get_block = get_block,
                .use_writepage = 0,
        };
        int ret = __mpage_writepage(page, wbc, &mpd);
        if (mpd.bio)
                mpage_bio_submit(WRITE, mpd.bio);
        return ret;
}
EXPORT_SYMBOL(mpage_writepage);