Merge branch 'master'
[linux-2.6] / arch / alpha / oprofile / common.c
1 /**
2  * @file arch/alpha/oprofile/common.c
3  *
4  * @remark Copyright 2002 OProfile authors
5  * @remark Read the file COPYING
6  *
7  * @author Richard Henderson <rth@twiddle.net>
8  */
9
10 #include <linux/oprofile.h>
11 #include <linux/init.h>
12 #include <linux/smp.h>
13 #include <linux/errno.h>
14 #include <asm/ptrace.h>
15 #include <asm/system.h>
16
17 #include "op_impl.h"
18
19 extern struct op_axp_model op_model_ev4 __attribute__((weak));
20 extern struct op_axp_model op_model_ev5 __attribute__((weak));
21 extern struct op_axp_model op_model_pca56 __attribute__((weak));
22 extern struct op_axp_model op_model_ev6 __attribute__((weak));
23 extern struct op_axp_model op_model_ev67 __attribute__((weak));
24
25 static struct op_axp_model *model;
26
27 extern void (*perf_irq)(unsigned long, struct pt_regs *);
28 static void (*save_perf_irq)(unsigned long, struct pt_regs *);
29
30 static struct op_counter_config ctr[20];
31 static struct op_system_config sys;
32 static struct op_register_config reg;
33
34 /* Called from do_entInt to handle the performance monitor interrupt.  */
35
36 static void
37 op_handle_interrupt(unsigned long which, struct pt_regs *regs)
38 {
39         model->handle_interrupt(which, regs, ctr);
40
41         /* If the user has selected an interrupt frequency that is
42            not exactly the width of the counter, write a new value
43            into the counter such that it'll overflow after N more
44            events.  */
45         if ((reg.need_reset >> which) & 1)
46                 model->reset_ctr(&reg, which);
47 }
48  
49 static int
50 op_axp_setup(void)
51 {
52         unsigned long i, e;
53
54         /* Install our interrupt handler into the existing hook.  */
55         save_perf_irq = perf_irq;
56         perf_irq = op_handle_interrupt;
57
58         /* Compute the mask of enabled counters.  */
59         for (i = e = 0; i < model->num_counters; ++i)
60                 if (ctr[i].enabled)
61                         e |= 1 << i;
62         reg.enable = e;
63
64         /* Pre-compute the values to stuff in the hardware registers.  */
65         model->reg_setup(&reg, ctr, &sys);
66
67         /* Configure the registers on all cpus.  */
68         (void)smp_call_function(model->cpu_setup, &reg, 0, 1);
69         model->cpu_setup(&reg);
70         return 0;
71 }
72
73 static void
74 op_axp_shutdown(void)
75 {
76         /* Remove our interrupt handler.  We may be removing this module.  */
77         perf_irq = save_perf_irq;
78 }
79
80 static void
81 op_axp_cpu_start(void *dummy)
82 {
83         wrperfmon(1, reg.enable);
84 }
85
86 static int
87 op_axp_start(void)
88 {
89         (void)smp_call_function(op_axp_cpu_start, NULL, 0, 1);
90         op_axp_cpu_start(NULL);
91         return 0;
92 }
93
94 static inline void
95 op_axp_cpu_stop(void *dummy)
96 {
97         /* Disable performance monitoring for all counters.  */
98         wrperfmon(0, -1);
99 }
100
101 static void
102 op_axp_stop(void)
103 {
104         (void)smp_call_function(op_axp_cpu_stop, NULL, 0, 1);
105         op_axp_cpu_stop(NULL);
106 }
107
108 static int
109 op_axp_create_files(struct super_block * sb, struct dentry * root)
110 {
111         int i;
112
113         for (i = 0; i < model->num_counters; ++i) {
114                 struct dentry *dir;
115                 char buf[3];
116
117                 snprintf(buf, sizeof buf, "%d", i);
118                 dir = oprofilefs_mkdir(sb, root, buf);
119
120                 oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
121                 oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
122                 oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
123                 /* Dummies.  */
124                 oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
125                 oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
126                 oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
127         }
128
129         if (model->can_set_proc_mode) {
130                 oprofilefs_create_ulong(sb, root, "enable_pal",
131                                         &sys.enable_pal);
132                 oprofilefs_create_ulong(sb, root, "enable_kernel",
133                                         &sys.enable_kernel);
134                 oprofilefs_create_ulong(sb, root, "enable_user",
135                                         &sys.enable_user);
136         }
137
138         return 0;
139 }
140
141 int __init
142 oprofile_arch_init(struct oprofile_operations *ops)
143 {
144         struct op_axp_model *lmodel = NULL;
145
146         switch (implver()) {
147         case IMPLVER_EV4:
148                 lmodel = &op_model_ev4;
149                 break;
150         case IMPLVER_EV5:
151                 /* 21164PC has a slightly different set of events.
152                    Recognize the chip by the presence of the MAX insns.  */
153                 if (!amask(AMASK_MAX))
154                         lmodel = &op_model_pca56;
155                 else
156                         lmodel = &op_model_ev5;
157                 break;
158         case IMPLVER_EV6:
159                 /* 21264A supports ProfileMe.
160                    Recognize the chip by the presence of the CIX insns.  */
161                 if (!amask(AMASK_CIX))
162                         lmodel = &op_model_ev67;
163                 else
164                         lmodel = &op_model_ev6;
165                 break;
166         }
167
168         if (!lmodel)
169                 return -ENODEV;
170         model = lmodel;
171
172         ops->create_files = op_axp_create_files;
173         ops->setup = op_axp_setup;
174         ops->shutdown = op_axp_shutdown;
175         ops->start = op_axp_start;
176         ops->stop = op_axp_stop;
177         ops->cpu_type = lmodel->cpu_type;
178
179         printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
180                lmodel->cpu_type);
181
182         return 0;
183 }
184
185
186 void
187 oprofile_arch_exit(void)
188 {
189 }