ehea: fix port_napi_disable/enable
[linux-2.6] / drivers / char / ipmi / ipmi_bt_sm.c
1 /*
2  *  ipmi_bt_sm.c
3  *
4  *  The state machine for an Open IPMI BT sub-driver under ipmi_si.c, part
5  *  of the driver architecture at http://sourceforge.net/project/openipmi
6  *
7  *  Author:     Rocky Craig <first.last@hp.com>
8  *
9  *  This program is free software; you can redistribute it and/or modify it
10  *  under the terms of the GNU General Public License as published by the
11  *  Free Software Foundation; either version 2 of the License, or (at your
12  *  option) any later version.
13  *
14  *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
15  *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
16  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
17  *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
18  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
19  *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
20  *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
21  *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
22  *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
23  *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24  *
25  *  You should have received a copy of the GNU General Public License along
26  *  with this program; if not, write to the Free Software Foundation, Inc.,
27  *  675 Mass Ave, Cambridge, MA 02139, USA.  */
28
29 #include <linux/kernel.h> /* For printk. */
30 #include <linux/string.h>
31 #include <linux/module.h>
32 #include <linux/moduleparam.h>
33 #include <linux/ipmi_msgdefs.h>         /* for completion codes */
34 #include "ipmi_si_sm.h"
35
36 #define BT_DEBUG_OFF    0       /* Used in production */
37 #define BT_DEBUG_ENABLE 1       /* Generic messages */
38 #define BT_DEBUG_MSG    2       /* Prints all request/response buffers */
39 #define BT_DEBUG_STATES 4       /* Verbose look at state changes */
40 /* BT_DEBUG_OFF must be zero to correspond to the default uninitialized
41    value */
42
43 static int bt_debug; /* 0 == BT_DEBUG_OFF */
44
45 module_param(bt_debug, int, 0644);
46 MODULE_PARM_DESC(bt_debug, "debug bitmask, 1=enable, 2=messages, 4=states");
47
48 /* Typical "Get BT Capabilities" values are 2-3 retries, 5-10 seconds,
49    and 64 byte buffers.  However, one HP implementation wants 255 bytes of
50    buffer (with a documented message of 160 bytes) so go for the max.
51    Since the Open IPMI architecture is single-message oriented at this
52    stage, the queue depth of BT is of no concern. */
53
54 #define BT_NORMAL_TIMEOUT       5       /* seconds */
55 #define BT_NORMAL_RETRY_LIMIT   2
56 #define BT_RESET_DELAY          6       /* seconds after warm reset */
57
58 /* States are written in chronological order and usually cover
59    multiple rows of the state table discussion in the IPMI spec. */
60
61 enum bt_states {
62         BT_STATE_IDLE = 0,      /* Order is critical in this list */
63         BT_STATE_XACTION_START,
64         BT_STATE_WRITE_BYTES,
65         BT_STATE_WRITE_CONSUME,
66         BT_STATE_READ_WAIT,
67         BT_STATE_CLEAR_B2H,
68         BT_STATE_READ_BYTES,
69         BT_STATE_RESET1,        /* These must come last */
70         BT_STATE_RESET2,
71         BT_STATE_RESET3,
72         BT_STATE_RESTART,
73         BT_STATE_PRINTME,
74         BT_STATE_CAPABILITIES_BEGIN,
75         BT_STATE_CAPABILITIES_END,
76         BT_STATE_LONG_BUSY      /* BT doesn't get hosed :-) */
77 };
78
79 /* Macros seen at the end of state "case" blocks.  They help with legibility
80    and debugging. */
81
82 #define BT_STATE_CHANGE(X,Y) { bt->state = X; return Y; }
83
84 #define BT_SI_SM_RETURN(Y)   { last_printed = BT_STATE_PRINTME; return Y; }
85
86 struct si_sm_data {
87         enum bt_states  state;
88         unsigned char   seq;            /* BT sequence number */
89         struct si_sm_io *io;
90         unsigned char   write_data[IPMI_MAX_MSG_LENGTH];
91         int             write_count;
92         unsigned char   read_data[IPMI_MAX_MSG_LENGTH];
93         int             read_count;
94         int             truncated;
95         long            timeout;        /* microseconds countdown */
96         int             error_retries;  /* end of "common" fields */
97         int             nonzero_status; /* hung BMCs stay all 0 */
98         enum bt_states  complete;       /* to divert the state machine */
99         int             BT_CAP_outreqs;
100         long            BT_CAP_req2rsp;
101         int             BT_CAP_retries; /* Recommended retries */
102 };
103
104 #define BT_CLR_WR_PTR   0x01    /* See IPMI 1.5 table 11.6.4 */
105 #define BT_CLR_RD_PTR   0x02
106 #define BT_H2B_ATN      0x04
107 #define BT_B2H_ATN      0x08
108 #define BT_SMS_ATN      0x10
109 #define BT_OEM0         0x20
110 #define BT_H_BUSY       0x40
111 #define BT_B_BUSY       0x80
112
113 /* Some bits are toggled on each write: write once to set it, once
114    more to clear it; writing a zero does nothing.  To absolutely
115    clear it, check its state and write if set.  This avoids the "get
116    current then use as mask" scheme to modify one bit.  Note that the
117    variable "bt" is hardcoded into these macros. */
118
119 #define BT_STATUS       bt->io->inputb(bt->io, 0)
120 #define BT_CONTROL(x)   bt->io->outputb(bt->io, 0, x)
121
122 #define BMC2HOST        bt->io->inputb(bt->io, 1)
123 #define HOST2BMC(x)     bt->io->outputb(bt->io, 1, x)
124
125 #define BT_INTMASK_R    bt->io->inputb(bt->io, 2)
126 #define BT_INTMASK_W(x) bt->io->outputb(bt->io, 2, x)
127
128 /* Convenience routines for debugging.  These are not multi-open safe!
129    Note the macros have hardcoded variables in them. */
130
131 static char *state2txt(unsigned char state)
132 {
133         switch (state) {
134         case BT_STATE_IDLE:             return("IDLE");
135         case BT_STATE_XACTION_START:    return("XACTION");
136         case BT_STATE_WRITE_BYTES:      return("WR_BYTES");
137         case BT_STATE_WRITE_CONSUME:    return("WR_CONSUME");
138         case BT_STATE_READ_WAIT:        return("RD_WAIT");
139         case BT_STATE_CLEAR_B2H:        return("CLEAR_B2H");
140         case BT_STATE_READ_BYTES:       return("RD_BYTES");
141         case BT_STATE_RESET1:           return("RESET1");
142         case BT_STATE_RESET2:           return("RESET2");
143         case BT_STATE_RESET3:           return("RESET3");
144         case BT_STATE_RESTART:          return("RESTART");
145         case BT_STATE_LONG_BUSY:        return("LONG_BUSY");
146         case BT_STATE_CAPABILITIES_BEGIN: return("CAP_BEGIN");
147         case BT_STATE_CAPABILITIES_END: return("CAP_END");
148         }
149         return("BAD STATE");
150 }
151 #define STATE2TXT state2txt(bt->state)
152
153 static char *status2txt(unsigned char status)
154 {
155         /*
156          * This cannot be called by two threads at the same time and
157          * the buffer is always consumed immediately, so the static is
158          * safe to use.
159          */
160         static char buf[40];
161
162         strcpy(buf, "[ ");
163         if (status & BT_B_BUSY)
164                 strcat(buf, "B_BUSY ");
165         if (status & BT_H_BUSY)
166                 strcat(buf, "H_BUSY ");
167         if (status & BT_OEM0)
168                 strcat(buf, "OEM0 ");
169         if (status & BT_SMS_ATN)
170                 strcat(buf, "SMS ");
171         if (status & BT_B2H_ATN)
172                 strcat(buf, "B2H ");
173         if (status & BT_H2B_ATN)
174                 strcat(buf, "H2B ");
175         strcat(buf, "]");
176         return buf;
177 }
178 #define STATUS2TXT status2txt(status)
179
180 /* called externally at insmod time, and internally on cleanup */
181
182 static unsigned int bt_init_data(struct si_sm_data *bt, struct si_sm_io *io)
183 {
184         memset(bt, 0, sizeof(struct si_sm_data));
185         if (bt->io != io) {             /* external: one-time only things */
186                 bt->io = io;
187                 bt->seq = 0;
188         }
189         bt->state = BT_STATE_IDLE;      /* start here */
190         bt->complete = BT_STATE_IDLE;   /* end here */
191         bt->BT_CAP_req2rsp = BT_NORMAL_TIMEOUT * 1000000;
192         bt->BT_CAP_retries = BT_NORMAL_RETRY_LIMIT;
193         /* BT_CAP_outreqs == zero is a flag to read BT Capabilities */
194         return 3; /* We claim 3 bytes of space; ought to check SPMI table */
195 }
196
197 /* Jam a completion code (probably an error) into a response */
198
199 static void force_result(struct si_sm_data *bt, unsigned char completion_code)
200 {
201         bt->read_data[0] = 4;                           /* # following bytes */
202         bt->read_data[1] = bt->write_data[1] | 4;       /* Odd NetFn/LUN */
203         bt->read_data[2] = bt->write_data[2];           /* seq (ignored) */
204         bt->read_data[3] = bt->write_data[3];           /* Command */
205         bt->read_data[4] = completion_code;
206         bt->read_count = 5;
207 }
208
209 /* The upper state machine starts here */
210
211 static int bt_start_transaction(struct si_sm_data *bt,
212                                 unsigned char *data,
213                                 unsigned int size)
214 {
215         unsigned int i;
216
217         if (size < 2)
218                 return IPMI_REQ_LEN_INVALID_ERR;
219         if (size > IPMI_MAX_MSG_LENGTH)
220                 return IPMI_REQ_LEN_EXCEEDED_ERR;
221
222         if (bt->state == BT_STATE_LONG_BUSY)
223                 return IPMI_NODE_BUSY_ERR;
224
225         if (bt->state != BT_STATE_IDLE)
226                 return IPMI_NOT_IN_MY_STATE_ERR;
227
228         if (bt_debug & BT_DEBUG_MSG) {
229                 printk(KERN_WARNING "BT: +++++++++++++++++ New command\n");
230                 printk(KERN_WARNING "BT: NetFn/LUN CMD [%d data]:", size - 2);
231                 for (i = 0; i < size; i ++)
232                         printk (" %02x", data[i]);
233                 printk("\n");
234         }
235         bt->write_data[0] = size + 1;   /* all data plus seq byte */
236         bt->write_data[1] = *data;      /* NetFn/LUN */
237         bt->write_data[2] = bt->seq++;
238         memcpy(bt->write_data + 3, data + 1, size - 1);
239         bt->write_count = size + 2;
240         bt->error_retries = 0;
241         bt->nonzero_status = 0;
242         bt->truncated = 0;
243         bt->state = BT_STATE_XACTION_START;
244         bt->timeout = bt->BT_CAP_req2rsp;
245         force_result(bt, IPMI_ERR_UNSPECIFIED);
246         return 0;
247 }
248
249 /* After the upper state machine has been told SI_SM_TRANSACTION_COMPLETE
250    it calls this.  Strip out the length and seq bytes. */
251
252 static int bt_get_result(struct si_sm_data *bt,
253                          unsigned char *data,
254                          unsigned int length)
255 {
256         int i, msg_len;
257
258         msg_len = bt->read_count - 2;           /* account for length & seq */
259         if (msg_len < 3 || msg_len > IPMI_MAX_MSG_LENGTH) {
260                 force_result(bt, IPMI_ERR_UNSPECIFIED);
261                 msg_len = 3;
262         }
263         data[0] = bt->read_data[1];
264         data[1] = bt->read_data[3];
265         if (length < msg_len || bt->truncated) {
266                 data[2] = IPMI_ERR_MSG_TRUNCATED;
267                 msg_len = 3;
268         } else
269                 memcpy(data + 2, bt->read_data + 4, msg_len - 2);
270
271         if (bt_debug & BT_DEBUG_MSG) {
272                 printk (KERN_WARNING "BT: result %d bytes:", msg_len);
273                 for (i = 0; i < msg_len; i++)
274                         printk(" %02x", data[i]);
275                 printk ("\n");
276         }
277         return msg_len;
278 }
279
280 /* This bit's functionality is optional */
281 #define BT_BMC_HWRST    0x80
282
283 static void reset_flags(struct si_sm_data *bt)
284 {
285         if (bt_debug)
286                 printk(KERN_WARNING "IPMI BT: flag reset %s\n",
287                                         status2txt(BT_STATUS));
288         if (BT_STATUS & BT_H_BUSY)
289                 BT_CONTROL(BT_H_BUSY);  /* force clear */
290         BT_CONTROL(BT_CLR_WR_PTR);      /* always reset */
291         BT_CONTROL(BT_SMS_ATN);         /* always clear */
292         BT_INTMASK_W(BT_BMC_HWRST);
293 }
294
295 /* Get rid of an unwanted/stale response.  This should only be needed for
296    BMCs that support multiple outstanding requests. */
297
298 static void drain_BMC2HOST(struct si_sm_data *bt)
299 {
300         int i, size;
301
302         if (!(BT_STATUS & BT_B2H_ATN))  /* Not signalling a response */
303                 return;
304
305         BT_CONTROL(BT_H_BUSY);          /* now set */
306         BT_CONTROL(BT_B2H_ATN);         /* always clear */
307         BT_STATUS;                      /* pause */
308         BT_CONTROL(BT_B2H_ATN);         /* some BMCs are stubborn */
309         BT_CONTROL(BT_CLR_RD_PTR);      /* always reset */
310         if (bt_debug)
311                 printk(KERN_WARNING "IPMI BT: stale response %s; ",
312                         status2txt(BT_STATUS));
313         size = BMC2HOST;
314         for (i = 0; i < size ; i++)
315                 BMC2HOST;
316         BT_CONTROL(BT_H_BUSY);          /* now clear */
317         if (bt_debug)
318                 printk("drained %d bytes\n", size + 1);
319 }
320
321 static inline void write_all_bytes(struct si_sm_data *bt)
322 {
323         int i;
324
325         if (bt_debug & BT_DEBUG_MSG) {
326                 printk(KERN_WARNING "BT: write %d bytes seq=0x%02X",
327                         bt->write_count, bt->seq);
328                 for (i = 0; i < bt->write_count; i++)
329                         printk (" %02x", bt->write_data[i]);
330                 printk ("\n");
331         }
332         for (i = 0; i < bt->write_count; i++)
333                 HOST2BMC(bt->write_data[i]);
334 }
335
336 static inline int read_all_bytes(struct si_sm_data *bt)
337 {
338         unsigned char i;
339
340         /* length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode.
341            Keep layout of first four bytes aligned with write_data[] */
342
343         bt->read_data[0] = BMC2HOST;
344         bt->read_count = bt->read_data[0];
345
346         if (bt->read_count < 4 || bt->read_count >= IPMI_MAX_MSG_LENGTH) {
347                 if (bt_debug & BT_DEBUG_MSG)
348                         printk(KERN_WARNING "BT: bad raw rsp len=%d\n",
349                                 bt->read_count);
350                 bt->truncated = 1;
351                 return 1;       /* let next XACTION START clean it up */
352         }
353         for (i = 1; i <= bt->read_count; i++)
354                 bt->read_data[i] = BMC2HOST;
355         bt->read_count++;       /* Account internally for length byte */
356
357         if (bt_debug & BT_DEBUG_MSG) {
358                 int max = bt->read_count;
359
360                 printk(KERN_WARNING "BT: got %d bytes seq=0x%02X",
361                         max, bt->read_data[2]);
362                 if (max > 16)
363                         max = 16;
364                 for (i = 0; i < max; i++)
365                         printk (" %02x", bt->read_data[i]);
366                 printk ("%s\n", bt->read_count == max ? "" : " ...");
367         }
368
369         /* per the spec, the (NetFn[1], Seq[2], Cmd[3]) tuples must match */
370         if ((bt->read_data[3] == bt->write_data[3]) &&
371             (bt->read_data[2] == bt->write_data[2]) &&
372             ((bt->read_data[1] & 0xF8) == (bt->write_data[1] & 0xF8)))
373                         return 1;
374
375         if (bt_debug & BT_DEBUG_MSG)
376                 printk(KERN_WARNING "IPMI BT: bad packet: "
377                 "want 0x(%02X, %02X, %02X) got (%02X, %02X, %02X)\n",
378                 bt->write_data[1] | 0x04, bt->write_data[2], bt->write_data[3],
379                 bt->read_data[1],  bt->read_data[2],  bt->read_data[3]);
380         return 0;
381 }
382
383 /* Restart if retries are left, or return an error completion code */
384
385 static enum si_sm_result error_recovery(struct si_sm_data *bt,
386                                         unsigned char status,
387                                         unsigned char cCode)
388 {
389         char *reason;
390
391         bt->timeout = bt->BT_CAP_req2rsp;
392
393         switch (cCode) {
394         case IPMI_TIMEOUT_ERR:
395                 reason = "timeout";
396                 break;
397         default:
398                 reason = "internal error";
399                 break;
400         }
401
402         printk(KERN_WARNING "IPMI BT: %s in %s %s ",    /* open-ended line */
403                 reason, STATE2TXT, STATUS2TXT);
404
405         /* Per the IPMI spec, retries are based on the sequence number
406            known only to this module, so manage a restart here. */
407         (bt->error_retries)++;
408         if (bt->error_retries < bt->BT_CAP_retries) {
409                 printk("%d retries left\n",
410                         bt->BT_CAP_retries - bt->error_retries);
411                 bt->state = BT_STATE_RESTART;
412                 return SI_SM_CALL_WITHOUT_DELAY;
413         }
414
415         printk("failed %d retries, sending error response\n",
416                 bt->BT_CAP_retries);
417         if (!bt->nonzero_status)
418                 printk(KERN_ERR "IPMI BT: stuck, try power cycle\n");
419
420         /* this is most likely during insmod */
421         else if (bt->seq <= (unsigned char)(bt->BT_CAP_retries & 0xFF)) {
422                 printk(KERN_WARNING "IPMI: BT reset (takes 5 secs)\n");
423                 bt->state = BT_STATE_RESET1;
424                 return SI_SM_CALL_WITHOUT_DELAY;
425         }
426
427         /* Concoct a useful error message, set up the next state, and
428            be done with this sequence. */
429
430         bt->state = BT_STATE_IDLE;
431         switch (cCode) {
432         case IPMI_TIMEOUT_ERR:
433                 if (status & BT_B_BUSY) {
434                         cCode = IPMI_NODE_BUSY_ERR;
435                         bt->state = BT_STATE_LONG_BUSY;
436                 }
437                 break;
438         default:
439                 break;
440         }
441         force_result(bt, cCode);
442         return SI_SM_TRANSACTION_COMPLETE;
443 }
444
445 /* Check status and (usually) take action and change this state machine. */
446
447 static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
448 {
449         unsigned char status, BT_CAP[8];
450         static enum bt_states last_printed = BT_STATE_PRINTME;
451         int i;
452
453         status = BT_STATUS;
454         bt->nonzero_status |= status;
455         if ((bt_debug & BT_DEBUG_STATES) && (bt->state != last_printed)) {
456                 printk(KERN_WARNING "BT: %s %s TO=%ld - %ld \n",
457                         STATE2TXT,
458                         STATUS2TXT,
459                         bt->timeout,
460                         time);
461                 last_printed = bt->state;
462         }
463
464         /* Commands that time out may still (eventually) provide a response.
465            This stale response will get in the way of a new response so remove
466            it if possible (hopefully during IDLE).  Even if it comes up later
467            it will be rejected by its (now-forgotten) seq number. */
468
469         if ((bt->state < BT_STATE_WRITE_BYTES) && (status & BT_B2H_ATN)) {
470                 drain_BMC2HOST(bt);
471                 BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY);
472         }
473
474         if ((bt->state != BT_STATE_IDLE) &&
475             (bt->state <  BT_STATE_PRINTME)) {          /* check timeout */
476                 bt->timeout -= time;
477                 if ((bt->timeout < 0) && (bt->state < BT_STATE_RESET1))
478                         return error_recovery(bt,
479                                               status,
480                                               IPMI_TIMEOUT_ERR);
481         }
482
483         switch (bt->state) {
484
485         /* Idle state first checks for asynchronous messages from another
486            channel, then does some opportunistic housekeeping. */
487
488         case BT_STATE_IDLE:
489                 if (status & BT_SMS_ATN) {
490                         BT_CONTROL(BT_SMS_ATN); /* clear it */
491                         return SI_SM_ATTN;
492                 }
493
494                 if (status & BT_H_BUSY)         /* clear a leftover H_BUSY */
495                         BT_CONTROL(BT_H_BUSY);
496
497                 /* Read BT capabilities if it hasn't been done yet */
498                 if (!bt->BT_CAP_outreqs)
499                         BT_STATE_CHANGE(BT_STATE_CAPABILITIES_BEGIN,
500                                         SI_SM_CALL_WITHOUT_DELAY);
501                 bt->timeout = bt->BT_CAP_req2rsp;
502                 BT_SI_SM_RETURN(SI_SM_IDLE);
503
504         case BT_STATE_XACTION_START:
505                 if (status & (BT_B_BUSY | BT_H2B_ATN))
506                         BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY);
507                 if (BT_STATUS & BT_H_BUSY)
508                         BT_CONTROL(BT_H_BUSY);  /* force clear */
509                 BT_STATE_CHANGE(BT_STATE_WRITE_BYTES,
510                                 SI_SM_CALL_WITHOUT_DELAY);
511
512         case BT_STATE_WRITE_BYTES:
513                 if (status & BT_H_BUSY)
514                         BT_CONTROL(BT_H_BUSY);  /* clear */
515                 BT_CONTROL(BT_CLR_WR_PTR);
516                 write_all_bytes(bt);
517                 BT_CONTROL(BT_H2B_ATN); /* can clear too fast to catch */
518                 BT_STATE_CHANGE(BT_STATE_WRITE_CONSUME,
519                                 SI_SM_CALL_WITHOUT_DELAY);
520
521         case BT_STATE_WRITE_CONSUME:
522                 if (status & (BT_B_BUSY | BT_H2B_ATN))
523                         BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY);
524                 BT_STATE_CHANGE(BT_STATE_READ_WAIT,
525                                 SI_SM_CALL_WITHOUT_DELAY);
526
527         /* Spinning hard can suppress B2H_ATN and force a timeout */
528
529         case BT_STATE_READ_WAIT:
530                 if (!(status & BT_B2H_ATN))
531                         BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY);
532                 BT_CONTROL(BT_H_BUSY);          /* set */
533
534                 /* Uncached, ordered writes should just proceeed serially but
535                    some BMCs don't clear B2H_ATN with one hit.  Fast-path a
536                    workaround without too much penalty to the general case. */
537
538                 BT_CONTROL(BT_B2H_ATN);         /* clear it to ACK the BMC */
539                 BT_STATE_CHANGE(BT_STATE_CLEAR_B2H,
540                                 SI_SM_CALL_WITHOUT_DELAY);
541
542         case BT_STATE_CLEAR_B2H:
543                 if (status & BT_B2H_ATN) {      /* keep hitting it */
544                         BT_CONTROL(BT_B2H_ATN);
545                         BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY);
546                 }
547                 BT_STATE_CHANGE(BT_STATE_READ_BYTES,
548                                 SI_SM_CALL_WITHOUT_DELAY);
549
550         case BT_STATE_READ_BYTES:
551                 if (!(status & BT_H_BUSY))      /* check in case of retry */
552                         BT_CONTROL(BT_H_BUSY);
553                 BT_CONTROL(BT_CLR_RD_PTR);      /* start of BMC2HOST buffer */
554                 i = read_all_bytes(bt);         /* true == packet seq match */
555                 BT_CONTROL(BT_H_BUSY);          /* NOW clear */
556                 if (!i)                         /* Not my message */
557                         BT_STATE_CHANGE(BT_STATE_READ_WAIT,
558                                         SI_SM_CALL_WITHOUT_DELAY);
559                 bt->state = bt->complete;
560                 return bt->state == BT_STATE_IDLE ?     /* where to next? */
561                         SI_SM_TRANSACTION_COMPLETE :    /* normal */
562                         SI_SM_CALL_WITHOUT_DELAY;       /* Startup magic */
563
564         case BT_STATE_LONG_BUSY:        /* For example: after FW update */
565                 if (!(status & BT_B_BUSY)) {
566                         reset_flags(bt);        /* next state is now IDLE */
567                         bt_init_data(bt, bt->io);
568                 }
569                 return SI_SM_CALL_WITH_DELAY;   /* No repeat printing */
570
571         case BT_STATE_RESET1:
572                 reset_flags(bt);
573                 drain_BMC2HOST(bt);
574                 BT_STATE_CHANGE(BT_STATE_RESET2,
575                                 SI_SM_CALL_WITH_DELAY);
576
577         case BT_STATE_RESET2:           /* Send a soft reset */
578                 BT_CONTROL(BT_CLR_WR_PTR);
579                 HOST2BMC(3);            /* number of bytes following */
580                 HOST2BMC(0x18);         /* NetFn/LUN == Application, LUN 0 */
581                 HOST2BMC(42);           /* Sequence number */
582                 HOST2BMC(3);            /* Cmd == Soft reset */
583                 BT_CONTROL(BT_H2B_ATN);
584                 bt->timeout = BT_RESET_DELAY * 1000000;
585                 BT_STATE_CHANGE(BT_STATE_RESET3,
586                                 SI_SM_CALL_WITH_DELAY);
587
588         case BT_STATE_RESET3:           /* Hold off everything for a bit */
589                 if (bt->timeout > 0)
590                         return SI_SM_CALL_WITH_DELAY;
591                 drain_BMC2HOST(bt);
592                 BT_STATE_CHANGE(BT_STATE_RESTART,
593                                 SI_SM_CALL_WITH_DELAY);
594
595         case BT_STATE_RESTART:          /* don't reset retries or seq! */
596                 bt->read_count = 0;
597                 bt->nonzero_status = 0;
598                 bt->timeout = bt->BT_CAP_req2rsp;
599                 BT_STATE_CHANGE(BT_STATE_XACTION_START,
600                                 SI_SM_CALL_WITH_DELAY);
601
602         /* Get BT Capabilities, using timing of upper level state machine.
603            Set outreqs to prevent infinite loop on timeout. */
604         case BT_STATE_CAPABILITIES_BEGIN:
605                 bt->BT_CAP_outreqs = 1;
606                 {
607                         unsigned char GetBT_CAP[] = { 0x18, 0x36 };
608                         bt->state = BT_STATE_IDLE;
609                         bt_start_transaction(bt, GetBT_CAP, sizeof(GetBT_CAP));
610                 }
611                 bt->complete = BT_STATE_CAPABILITIES_END;
612                 BT_STATE_CHANGE(BT_STATE_XACTION_START,
613                                 SI_SM_CALL_WITH_DELAY);
614
615         case BT_STATE_CAPABILITIES_END:
616                 i = bt_get_result(bt, BT_CAP, sizeof(BT_CAP));
617                 bt_init_data(bt, bt->io);
618                 if ((i == 8) && !BT_CAP[2]) {
619                         bt->BT_CAP_outreqs = BT_CAP[3];
620                         bt->BT_CAP_req2rsp = BT_CAP[6] * 1000000;
621                         bt->BT_CAP_retries = BT_CAP[7];
622                 } else
623                         printk(KERN_WARNING "IPMI BT: using default values\n");
624                 if (!bt->BT_CAP_outreqs)
625                         bt->BT_CAP_outreqs = 1;
626                 printk(KERN_WARNING "IPMI BT: req2rsp=%ld secs retries=%d\n",
627                         bt->BT_CAP_req2rsp / 1000000L, bt->BT_CAP_retries);
628                 bt->timeout = bt->BT_CAP_req2rsp;
629                 return SI_SM_CALL_WITHOUT_DELAY;
630
631         default:        /* should never occur */
632                 return error_recovery(bt,
633                                       status,
634                                       IPMI_ERR_UNSPECIFIED);
635         }
636         return SI_SM_CALL_WITH_DELAY;
637 }
638
639 static int bt_detect(struct si_sm_data *bt)
640 {
641         /* It's impossible for the BT status and interrupt registers to be
642            all 1's, (assuming a properly functioning, self-initialized BMC)
643            but that's what you get from reading a bogus address, so we
644            test that first.  The calling routine uses negative logic. */
645
646         if ((BT_STATUS == 0xFF) && (BT_INTMASK_R == 0xFF))
647                 return 1;
648         reset_flags(bt);
649         return 0;
650 }
651
652 static void bt_cleanup(struct si_sm_data *bt)
653 {
654 }
655
656 static int bt_size(void)
657 {
658         return sizeof(struct si_sm_data);
659 }
660
661 struct si_sm_handlers bt_smi_handlers =
662 {
663         .init_data              = bt_init_data,
664         .start_transaction      = bt_start_transaction,
665         .get_result             = bt_get_result,
666         .event                  = bt_event,
667         .detect                 = bt_detect,
668         .cleanup                = bt_cleanup,
669         .size                   = bt_size,
670 };