git.oblomov.eu Git - linux-2.6/blob - drivers/usb/host/uhci-hcd.c

   1 /*
   2  * Universal Host Controller Interface driver for USB.
   3  *
   4  * Maintainer: Alan Stern <stern@rowland.harvard.edu>
   5  *
   6  * (C) Copyright 1999 Linus Torvalds
   7  * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
   8  * (C) Copyright 1999 Randy Dunlap
   9  * (C) Copyright 1999 Georg Acher, acher@in.tum.de
  10  * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
  11  * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
  12  * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
  13  * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
  14  *               support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
  15  * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
  16  * (C) Copyright 2004-2005 Alan Stern, stern@rowland.harvard.edu
  17  *
  18  * Intel documents this fairly well, and as far as I know there
  19  * are no royalties or anything like that, but even so there are
  20  * people who decided that they want to do the same thing in a
  21  * completely different way.
  22  *
  23  */
  24
  25 #include <linux/config.h>
  26 #ifdef CONFIG_USB_DEBUG
  27 #define DEBUG
  28 #else
  29 #undef DEBUG
  30 #endif
  31 #include <linux/module.h>
  32 #include <linux/pci.h>
  33 #include <linux/kernel.h>
  34 #include <linux/init.h>
  35 #include <linux/delay.h>
  36 #include <linux/ioport.h>
  37 #include <linux/sched.h>
  38 #include <linux/slab.h>
  39 #include <linux/smp_lock.h>
  40 #include <linux/errno.h>
  41 #include <linux/unistd.h>
  42 #include <linux/interrupt.h>
  43 #include <linux/spinlock.h>
  44 #include <linux/debugfs.h>
  45 #include <linux/pm.h>
  46 #include <linux/dmapool.h>
  47 #include <linux/dma-mapping.h>
  48 #include <linux/usb.h>
  49 #include <linux/bitops.h>
  50
  51 #include <asm/uaccess.h>
  52 #include <asm/io.h>
  53 #include <asm/irq.h>
  54 #include <asm/system.h>
  55
  56 #include "../core/hcd.h"
  57 #include "uhci-hcd.h"
  58
  59 /*
  60  * Version Information
  61  */
  62 #define DRIVER_VERSION "v2.3"
  63 #define DRIVER_AUTHOR "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, \
  64 Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, \
  65 Alan Stern"
  66 #define DRIVER_DESC "USB Universal Host Controller Interface driver"
  67
  68 /*
  69  * debug = 0, no debugging messages
  70  * debug = 1, dump failed URB's except for stalls
  71  * debug = 2, dump all failed URB's (including stalls)
  72  *            show all queues in /debug/uhci/[pci_addr]
  73  * debug = 3, show all TD's in URB's when dumping
  74  */
  75 #ifdef DEBUG
  76 static int debug = 1;
  77 #else
  78 static int debug = 0;
  79 #endif
  80 module_param(debug, int, S_IRUGO | S_IWUSR);
  81 MODULE_PARM_DESC(debug, "Debug level");
  82 static char *errbuf;
  83 #define ERRBUF_LEN    (32 * 1024)
  84
  85 static kmem_cache_t *uhci_up_cachep;    /* urb_priv */
  86
  87 static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state);
  88 static void wakeup_rh(struct uhci_hcd *uhci);
  89 static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
  90
  91 /* If a transfer is still active after this much time, turn off FSBR */
  92 #define IDLE_TIMEOUT    msecs_to_jiffies(50)
  93 #define FSBR_DELAY      msecs_to_jiffies(50)
  94
  95 /* When we timeout an idle transfer for FSBR, we'll switch it over to */
  96 /* depth first traversal. We'll do it in groups of this number of TD's */
  97 /* to make sure it doesn't hog all of the bandwidth */
  98 #define DEPTH_INTERVAL 5
  99
 100 #include "uhci-debug.c"
 101 #include "uhci-q.c"
 102 #include "uhci-hub.c"
 103
 104 extern void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
 105 extern int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
 106
 107 /*
 108  * Finish up a host controller reset and update the recorded state.
 109  */
 110 static void finish_reset(struct uhci_hcd *uhci)
 111 {
 112         int port;
 113
 114         /* HCRESET doesn't affect the Suspend, Reset, and Resume Detect
 115          * bits in the port status and control registers.
 116          * We have to clear them by hand.
 117          */
 118         for (port = 0; port < uhci->rh_numports; ++port)
 119                 outw(0, uhci->io_addr + USBPORTSC1 + (port * 2));
 120
 121         uhci->port_c_suspend = uhci->suspended_ports =
 122                         uhci->resuming_ports = 0;
 123         uhci->rh_state = UHCI_RH_RESET;
 124         uhci->is_stopped = UHCI_IS_STOPPED;
 125         uhci_to_hcd(uhci)->state = HC_STATE_HALT;
 126         uhci_to_hcd(uhci)->poll_rh = 0;
 127 }
 128
 129 /*
 130  * Last rites for a defunct/nonfunctional controller
 131  * or one we don't want to use any more.
 132  */
 133 static void hc_died(struct uhci_hcd *uhci)
 134 {
 135         uhci_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr);
 136         finish_reset(uhci);
 137         uhci->hc_inaccessible = 1;
 138 }
 139
 140 /*
 141  * Initialize a controller that was newly discovered or has just been
 142  * resumed.  In either case we can't be sure of its previous state.
 143  */
 144 static void check_and_reset_hc(struct uhci_hcd *uhci)
 145 {
 146         if (uhci_check_and_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr))
 147                 finish_reset(uhci);
 148 }
 149
 150 /*
 151  * Store the basic register settings needed by the controller.
 152  */
 153 static void configure_hc(struct uhci_hcd *uhci)
 154 {
 155         /* Set the frame length to the default: 1 ms exactly */
 156         outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF);
 157
 158         /* Store the frame list base address */
 159         outl(uhci->frame_dma_handle, uhci->io_addr + USBFLBASEADD);
 160
 161         /* Set the current frame number */
 162         outw(uhci->frame_number, uhci->io_addr + USBFRNUM);
 163
 164         /* Mark controller as not halted before we enable interrupts */
 165         uhci_to_hcd(uhci)->state = HC_STATE_SUSPENDED;
 166         mb();
 167
 168         /* Enable PIRQ */
 169         pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
 170                         USBLEGSUP_DEFAULT);
 171 }
 172
 173
 174 static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
 175 {
 176         int port;
 177
 178         switch (to_pci_dev(uhci_dev(uhci))->vendor) {
 179             default:
 180                 break;
 181
 182             case PCI_VENDOR_ID_GENESYS:
 183                 /* Genesys Logic's GL880S controllers don't generate
 184                  * resume-detect interrupts.
 185                  */
 186                 return 1;
 187
 188             case PCI_VENDOR_ID_INTEL:
 189                 /* Some of Intel's USB controllers have a bug that causes
 190                  * resume-detect interrupts if any port has an over-current
 191                  * condition.  To make matters worse, some motherboards
 192                  * hardwire unused USB ports' over-current inputs active!
 193                  * To prevent problems, we will not enable resume-detect
 194                  * interrupts if any ports are OC.
 195                  */
 196                 for (port = 0; port < uhci->rh_numports; ++port) {
 197                         if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
 198                                         USBPORTSC_OC)
 199                                 return 1;
 200                 }
 201                 break;
 202         }
 203         return 0;
 204 }
 205
 206 static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state)
 207 __releases(uhci->lock)
 208 __acquires(uhci->lock)
 209 {
 210         int auto_stop;
 211         int int_enable;
 212
 213         auto_stop = (new_state == UHCI_RH_AUTO_STOPPED);
 214         dev_dbg(uhci_dev(uhci), "%s%s\n", __FUNCTION__,
 215                         (auto_stop ? " (auto-stop)" : ""));
 216
 217         /* If we get a suspend request when we're already auto-stopped
 218          * then there's nothing to do.
 219          */
 220         if (uhci->rh_state == UHCI_RH_AUTO_STOPPED) {
 221                 uhci->rh_state = new_state;
 222                 return;
 223         }
 224
 225         /* Enable resume-detect interrupts if they work.
 226          * Then enter Global Suspend mode, still configured.
 227          */
 228         uhci->working_RD = 1;
 229         int_enable = USBINTR_RESUME;
 230         if (resume_detect_interrupts_are_broken(uhci)) {
 231                 uhci->working_RD = int_enable = 0;
 232         }
 233         outw(int_enable, uhci->io_addr + USBINTR);
 234         outw(USBCMD_EGSM | USBCMD_CF, uhci->io_addr + USBCMD);
 235         mb();
 236         udelay(5);
 237
 238         /* If we're auto-stopping then no devices have been attached
 239          * for a while, so there shouldn't be any active URBs and the
 240          * controller should stop after a few microseconds.  Otherwise
 241          * we will give the controller one frame to stop.
 242          */
 243         if (!auto_stop && !(inw(uhci->io_addr + USBSTS) & USBSTS_HCH)) {
 244                 uhci->rh_state = UHCI_RH_SUSPENDING;
 245                 spin_unlock_irq(&uhci->lock);
 246                 msleep(1);
 247                 spin_lock_irq(&uhci->lock);
 248                 if (uhci->hc_inaccessible)      /* Died */
 249                         return;
 250         }
 251         if (!(inw(uhci->io_addr + USBSTS) & USBSTS_HCH))
 252                 dev_warn(uhci_dev(uhci), "Controller not stopped yet!\n");
 253
 254         uhci_get_current_frame_number(uhci);
 255         smp_wmb();
 256
 257         uhci->rh_state = new_state;
 258         uhci->is_stopped = UHCI_IS_STOPPED;
 259         uhci_to_hcd(uhci)->poll_rh = !int_enable;
 260
 261         uhci_scan_schedule(uhci, NULL);
 262 }
 263
 264 static void start_rh(struct uhci_hcd *uhci)
 265 {
 266         uhci_to_hcd(uhci)->state = HC_STATE_RUNNING;
 267         uhci->is_stopped = 0;
 268         smp_wmb();
 269
 270         /* Mark it configured and running with a 64-byte max packet.
 271          * All interrupts are enabled, even though RESUME won't do anything.
 272          */
 273         outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP, uhci->io_addr + USBCMD);
 274         outw(USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP,
 275                         uhci->io_addr + USBINTR);
 276         mb();
 277         uhci->rh_state = UHCI_RH_RUNNING;
 278         uhci_to_hcd(uhci)->poll_rh = 1;
 279 }
 280
 281 static void wakeup_rh(struct uhci_hcd *uhci)
 282 __releases(uhci->lock)
 283 __acquires(uhci->lock)
 284 {
 285         dev_dbg(uhci_dev(uhci), "%s%s\n", __FUNCTION__,
 286                         uhci->rh_state == UHCI_RH_AUTO_STOPPED ?
 287                                 " (auto-start)" : "");
 288
 289         /* If we are auto-stopped then no devices are attached so there's
 290          * no need for wakeup signals.  Otherwise we send Global Resume
 291          * for 20 ms.
 292          */
 293         if (uhci->rh_state == UHCI_RH_SUSPENDED) {
 294                 uhci->rh_state = UHCI_RH_RESUMING;
 295                 outw(USBCMD_FGR | USBCMD_EGSM | USBCMD_CF,
 296                                 uhci->io_addr + USBCMD);
 297                 spin_unlock_irq(&uhci->lock);
 298                 msleep(20);
 299                 spin_lock_irq(&uhci->lock);
 300                 if (uhci->hc_inaccessible)      /* Died */
 301                         return;
 302
 303                 /* End Global Resume and wait for EOP to be sent */
 304                 outw(USBCMD_CF, uhci->io_addr + USBCMD);
 305                 mb();
 306                 udelay(4);
 307                 if (inw(uhci->io_addr + USBCMD) & USBCMD_FGR)
 308                         dev_warn(uhci_dev(uhci), "FGR not stopped yet!\n");
 309         }
 310
 311         start_rh(uhci);
 312
 313         /* Restart root hub polling */
 314         mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies);
 315 }
 316
 317 static irqreturn_t uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs)
 318 {
 319         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 320         unsigned short status;
 321         unsigned long flags;
 322
 323         /*
 324          * Read the interrupt status, and write it back to clear the
 325          * interrupt cause.  Contrary to the UHCI specification, the
 326          * "HC Halted" status bit is persistent: it is RO, not R/WC.
 327          */
 328         status = inw(uhci->io_addr + USBSTS);
 329         if (!(status & ~USBSTS_HCH))    /* shared interrupt, not mine */
 330                 return IRQ_NONE;
 331         outw(status, uhci->io_addr + USBSTS);           /* Clear it */
 332
 333         if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) {
 334                 if (status & USBSTS_HSE)
 335                         dev_err(uhci_dev(uhci), "host system error, "
 336                                         "PCI problems?\n");
 337                 if (status & USBSTS_HCPE)
 338                         dev_err(uhci_dev(uhci), "host controller process "
 339                                         "error, something bad happened!\n");
 340                 if (status & USBSTS_HCH) {
 341                         spin_lock_irqsave(&uhci->lock, flags);
 342                         if (uhci->rh_state >= UHCI_RH_RUNNING) {
 343                                 dev_err(uhci_dev(uhci),
 344                                         "host controller halted, "
 345                                         "very bad!\n");
 346                                 hc_died(uhci);
 347
 348                                 /* Force a callback in case there are
 349                                  * pending unlinks */
 350                                 mod_timer(&hcd->rh_timer, jiffies);
 351                         }
 352                         spin_unlock_irqrestore(&uhci->lock, flags);
 353                 }
 354         }
 355
 356         if (status & USBSTS_RD)
 357                 usb_hcd_poll_rh_status(hcd);
 358         else {
 359                 spin_lock_irqsave(&uhci->lock, flags);
 360                 uhci_scan_schedule(uhci, regs);
 361                 spin_unlock_irqrestore(&uhci->lock, flags);
 362         }
 363
 364         return IRQ_HANDLED;
 365 }
 366
 367 /*
 368  * Store the current frame number in uhci->frame_number if the controller
 369  * is runnning
 370  */
 371 static void uhci_get_current_frame_number(struct uhci_hcd *uhci)
 372 {
 373         if (!uhci->is_stopped)
 374                 uhci->frame_number = inw(uhci->io_addr + USBFRNUM);
 375 }
 376
 377 /*
 378  * De-allocate all resources
 379  */
 380 static void release_uhci(struct uhci_hcd *uhci)
 381 {
 382         int i;
 383
 384         for (i = 0; i < UHCI_NUM_SKELQH; i++)
 385                 uhci_free_qh(uhci, uhci->skelqh[i]);
 386
 387         uhci_free_td(uhci, uhci->term_td);
 388
 389         dma_pool_destroy(uhci->qh_pool);
 390
 391         dma_pool_destroy(uhci->td_pool);
 392
 393         kfree(uhci->frame_cpu);
 394
 395         dma_free_coherent(uhci_dev(uhci),
 396                         UHCI_NUMFRAMES * sizeof(*uhci->frame),
 397                         uhci->frame, uhci->frame_dma_handle);
 398
 399         debugfs_remove(uhci->dentry);
 400 }
 401
 402 static int uhci_reset(struct usb_hcd *hcd)
 403 {
 404         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 405         unsigned io_size = (unsigned) hcd->rsrc_len;
 406         int port;
 407
 408         uhci->io_addr = (unsigned long) hcd->rsrc_start;
 409
 410         /* The UHCI spec says devices must have 2 ports, and goes on to say
 411          * they may have more but gives no way to determine how many there
 412          * are.  However according to the UHCI spec, Bit 7 of the port
 413          * status and control register is always set to 1.  So we try to
 414          * use this to our advantage.  Another common failure mode when
 415          * a nonexistent register is addressed is to return all ones, so
 416          * we test for that also.
 417          */
 418         for (port = 0; port < (io_size - USBPORTSC1) / 2; port++) {
 419                 unsigned int portstatus;
 420
 421                 portstatus = inw(uhci->io_addr + USBPORTSC1 + (port * 2));
 422                 if (!(portstatus & 0x0080) || portstatus == 0xffff)
 423                         break;
 424         }
 425         if (debug)
 426                 dev_info(uhci_dev(uhci), "detected %d ports\n", port);
 427
 428         /* Anything greater than 7 is weird so we'll ignore it. */
 429         if (port > UHCI_RH_MAXCHILD) {
 430                 dev_info(uhci_dev(uhci), "port count misdetected? "
 431                                 "forcing to 2 ports\n");
 432                 port = 2;
 433         }
 434         uhci->rh_numports = port;
 435
 436         /* Kick BIOS off this hardware and reset if the controller
 437          * isn't already safely quiescent.
 438          */
 439         check_and_reset_hc(uhci);
 440         return 0;
 441 }
 442
 443 /* Make sure the controller is quiescent and that we're not using it
 444  * any more.  This is mainly for the benefit of programs which, like kexec,
 445  * expect the hardware to be idle: not doing DMA or generating IRQs.
 446  *
 447  * This routine may be called in a damaged or failing kernel.  Hence we
 448  * do not acquire the spinlock before shutting down the controller.
 449  */
 450 static void uhci_shutdown(struct pci_dev *pdev)
 451 {
 452         struct usb_hcd *hcd = (struct usb_hcd *) pci_get_drvdata(pdev);
 453
 454         hc_died(hcd_to_uhci(hcd));
 455 }
 456
 457 /*
 458  * Allocate a frame list, and then setup the skeleton
 459  *
 460  * The hardware doesn't really know any difference
 461  * in the queues, but the order does matter for the
 462  * protocols higher up. The order is:
 463  *
 464  *  - any isochronous events handled before any
 465  *    of the queues. We don't do that here, because
 466  *    we'll create the actual TD entries on demand.
 467  *  - The first queue is the interrupt queue.
 468  *  - The second queue is the control queue, split into low- and full-speed
 469  *  - The third queue is bulk queue.
 470  *  - The fourth queue is the bandwidth reclamation queue, which loops back
 471  *    to the full-speed control queue.
 472  */
 473 static int uhci_start(struct usb_hcd *hcd)
 474 {
 475         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 476         int retval = -EBUSY;
 477         int i;
 478         struct dentry *dentry;
 479
 480         hcd->uses_new_polling = 1;
 481         if (pci_find_capability(to_pci_dev(uhci_dev(uhci)), PCI_CAP_ID_PM))
 482                 hcd->can_wakeup = 1;            /* Assume it supports PME# */
 483
 484         dentry = debugfs_create_file(hcd->self.bus_name,
 485                         S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, uhci,
 486                         &uhci_debug_operations);
 487         if (!dentry) {
 488                 dev_err(uhci_dev(uhci),
 489                                 "couldn't create uhci debugfs entry\n");
 490                 retval = -ENOMEM;
 491                 goto err_create_debug_entry;
 492         }
 493         uhci->dentry = dentry;
 494
 495         uhci->fsbr = 0;
 496         uhci->fsbrtimeout = 0;
 497
 498         spin_lock_init(&uhci->lock);
 499         INIT_LIST_HEAD(&uhci->qh_remove_list);
 500
 501         INIT_LIST_HEAD(&uhci->td_remove_list);
 502
 503         INIT_LIST_HEAD(&uhci->urb_remove_list);
 504
 505         INIT_LIST_HEAD(&uhci->urb_list);
 506
 507         INIT_LIST_HEAD(&uhci->complete_list);
 508
 509         init_waitqueue_head(&uhci->waitqh);
 510
 511         uhci->frame = dma_alloc_coherent(uhci_dev(uhci),
 512                         UHCI_NUMFRAMES * sizeof(*uhci->frame),
 513                         &uhci->frame_dma_handle, 0);
 514         if (!uhci->frame) {
 515                 dev_err(uhci_dev(uhci), "unable to allocate "
 516                                 "consistent memory for frame list\n");
 517                 goto err_alloc_frame;
 518         }
 519         memset(uhci->frame, 0, UHCI_NUMFRAMES * sizeof(*uhci->frame));
 520
 521         uhci->frame_cpu = kcalloc(UHCI_NUMFRAMES, sizeof(*uhci->frame_cpu),
 522                         GFP_KERNEL);
 523         if (!uhci->frame_cpu) {
 524                 dev_err(uhci_dev(uhci), "unable to allocate "
 525                                 "memory for frame pointers\n");
 526                 goto err_alloc_frame_cpu;
 527         }
 528
 529         uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci),
 530                         sizeof(struct uhci_td), 16, 0);
 531         if (!uhci->td_pool) {
 532                 dev_err(uhci_dev(uhci), "unable to create td dma_pool\n");
 533                 goto err_create_td_pool;
 534         }
 535
 536         uhci->qh_pool = dma_pool_create("uhci_qh", uhci_dev(uhci),
 537                         sizeof(struct uhci_qh), 16, 0);
 538         if (!uhci->qh_pool) {
 539                 dev_err(uhci_dev(uhci), "unable to create qh dma_pool\n");
 540                 goto err_create_qh_pool;
 541         }
 542
 543         uhci->term_td = uhci_alloc_td(uhci);
 544         if (!uhci->term_td) {
 545                 dev_err(uhci_dev(uhci), "unable to allocate terminating TD\n");
 546                 goto err_alloc_term_td;
 547         }
 548
 549         for (i = 0; i < UHCI_NUM_SKELQH; i++) {
 550                 uhci->skelqh[i] = uhci_alloc_qh(uhci);
 551                 if (!uhci->skelqh[i]) {
 552                         dev_err(uhci_dev(uhci), "unable to allocate QH\n");
 553                         goto err_alloc_skelqh;
 554                 }
 555         }
 556
 557         /*
 558          * 8 Interrupt queues; link all higher int queues to int1,
 559          * then link int1 to control and control to bulk
 560          */
 561         uhci->skel_int128_qh->link =
 562                         uhci->skel_int64_qh->link =
 563                         uhci->skel_int32_qh->link =
 564                         uhci->skel_int16_qh->link =
 565                         uhci->skel_int8_qh->link =
 566                         uhci->skel_int4_qh->link =
 567                         uhci->skel_int2_qh->link =
 568                         cpu_to_le32(uhci->skel_int1_qh->dma_handle) | UHCI_PTR_QH;
 569         uhci->skel_int1_qh->link = cpu_to_le32(uhci->skel_ls_control_qh->dma_handle) | UHCI_PTR_QH;
 570
 571         uhci->skel_ls_control_qh->link = cpu_to_le32(uhci->skel_fs_control_qh->dma_handle) | UHCI_PTR_QH;
 572         uhci->skel_fs_control_qh->link = cpu_to_le32(uhci->skel_bulk_qh->dma_handle) | UHCI_PTR_QH;
 573         uhci->skel_bulk_qh->link = cpu_to_le32(uhci->skel_term_qh->dma_handle) | UHCI_PTR_QH;
 574
 575         /* This dummy TD is to work around a bug in Intel PIIX controllers */
 576         uhci_fill_td(uhci->term_td, 0, (UHCI_NULL_DATA_SIZE << 21) |
 577                 (0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
 578         uhci->term_td->link = cpu_to_le32(uhci->term_td->dma_handle);
 579
 580         uhci->skel_term_qh->link = UHCI_PTR_TERM;
 581         uhci->skel_term_qh->element = cpu_to_le32(uhci->term_td->dma_handle);
 582
 583         /*
 584          * Fill the frame list: make all entries point to the proper
 585          * interrupt queue.
 586          *
 587          * The interrupt queues will be interleaved as evenly as possible.
 588          * There's not much to be done about period-1 interrupts; they have
 589          * to occur in every frame.  But we can schedule period-2 interrupts
 590          * in odd-numbered frames, period-4 interrupts in frames congruent
 591          * to 2 (mod 4), and so on.  This way each frame only has two
 592          * interrupt QHs, which will help spread out bandwidth utilization.
 593          */
 594         for (i = 0; i < UHCI_NUMFRAMES; i++) {
 595                 int irq;
 596
 597                 /*
 598                  * ffs (Find First bit Set) does exactly what we need:
 599                  * 1,3,5,...  => ffs = 0 => use skel_int2_qh = skelqh[6],
 600                  * 2,6,10,... => ffs = 1 => use skel_int4_qh = skelqh[5], etc.
 601                  * ffs > 6 => not on any high-period queue, so use
 602                  *      skel_int1_qh = skelqh[7].
 603                  * Add UHCI_NUMFRAMES to insure at least one bit is set.
 604                  */
 605                 irq = 6 - (int) __ffs(i + UHCI_NUMFRAMES);
 606                 if (irq < 0)
 607                         irq = 7;
 608
 609                 /* Only place we don't use the frame list routines */
 610                 uhci->frame[i] = UHCI_PTR_QH |
 611                                 cpu_to_le32(uhci->skelqh[irq]->dma_handle);
 612         }
 613
 614         /*
 615          * Some architectures require a full mb() to enforce completion of
 616          * the memory writes above before the I/O transfers in configure_hc().
 617          */
 618         mb();
 619
 620         configure_hc(uhci);
 621         start_rh(uhci);
 622         return 0;
 623
 624 /*
 625  * error exits:
 626  */
 627 err_alloc_skelqh:
 628         for (i = 0; i < UHCI_NUM_SKELQH; i++) {
 629                 if (uhci->skelqh[i])
 630                         uhci_free_qh(uhci, uhci->skelqh[i]);
 631         }
 632
 633         uhci_free_td(uhci, uhci->term_td);
 634
 635 err_alloc_term_td:
 636         dma_pool_destroy(uhci->qh_pool);
 637
 638 err_create_qh_pool:
 639         dma_pool_destroy(uhci->td_pool);
 640
 641 err_create_td_pool:
 642         kfree(uhci->frame_cpu);
 643
 644 err_alloc_frame_cpu:
 645         dma_free_coherent(uhci_dev(uhci),
 646                         UHCI_NUMFRAMES * sizeof(*uhci->frame),
 647                         uhci->frame, uhci->frame_dma_handle);
 648
 649 err_alloc_frame:
 650         debugfs_remove(uhci->dentry);
 651
 652 err_create_debug_entry:
 653         return retval;
 654 }
 655
 656 static void uhci_stop(struct usb_hcd *hcd)
 657 {
 658         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 659
 660         spin_lock_irq(&uhci->lock);
 661         if (!uhci->hc_inaccessible)
 662                 hc_died(uhci);
 663         uhci_scan_schedule(uhci, NULL);
 664         spin_unlock_irq(&uhci->lock);
 665
 666         release_uhci(uhci);
 667 }
 668
 669 #ifdef CONFIG_PM
 670 static int uhci_rh_suspend(struct usb_hcd *hcd)
 671 {
 672         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 673
 674         spin_lock_irq(&uhci->lock);
 675         if (!uhci->hc_inaccessible)             /* Not dead */
 676                 suspend_rh(uhci, UHCI_RH_SUSPENDED);
 677         spin_unlock_irq(&uhci->lock);
 678         return 0;
 679 }
 680
 681 static int uhci_rh_resume(struct usb_hcd *hcd)
 682 {
 683         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 684         int rc = 0;
 685
 686         spin_lock_irq(&uhci->lock);
 687         if (uhci->hc_inaccessible) {
 688                 if (uhci->rh_state == UHCI_RH_SUSPENDED) {
 689                         dev_warn(uhci_dev(uhci), "HC isn't running!\n");
 690                         rc = -ENODEV;
 691                 }
 692                 /* Otherwise the HC is dead */
 693         } else
 694                 wakeup_rh(uhci);
 695         spin_unlock_irq(&uhci->lock);
 696         return rc;
 697 }
 698
 699 static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message)
 700 {
 701         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 702         int rc = 0;
 703
 704         dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
 705
 706         spin_lock_irq(&uhci->lock);
 707         if (uhci->hc_inaccessible)      /* Dead or already suspended */
 708                 goto done;
 709
 710         if (uhci->rh_state > UHCI_RH_SUSPENDED) {
 711                 dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n");
 712                 rc = -EBUSY;
 713                 goto done;
 714         };
 715
 716         /* All PCI host controllers are required to disable IRQ generation
 717          * at the source, so we must turn off PIRQ.
 718          */
 719         pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
 720         uhci->hc_inaccessible = 1;
 721         hcd->poll_rh = 0;
 722
 723         /* FIXME: Enable non-PME# remote wakeup? */
 724
 725 done:
 726         spin_unlock_irq(&uhci->lock);
 727         return rc;
 728 }
 729
 730 static int uhci_resume(struct usb_hcd *hcd)
 731 {
 732         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 733
 734         dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
 735
 736         if (uhci->rh_state == UHCI_RH_RESET)    /* Dead */
 737                 return 0;
 738         spin_lock_irq(&uhci->lock);
 739
 740         /* FIXME: Disable non-PME# remote wakeup? */
 741
 742         uhci->hc_inaccessible = 0;
 743
 744         /* The BIOS may have changed the controller settings during a
 745          * system wakeup.  Check it and reconfigure to avoid problems.
 746          */
 747         check_and_reset_hc(uhci);
 748         configure_hc(uhci);
 749
 750         if (uhci->rh_state == UHCI_RH_RESET)
 751                 suspend_rh(uhci, UHCI_RH_SUSPENDED);
 752
 753         spin_unlock_irq(&uhci->lock);
 754
 755         if (!uhci->working_RD) {
 756                 /* Suspended root hub needs to be polled */
 757                 hcd->poll_rh = 1;
 758                 usb_hcd_poll_rh_status(hcd);
 759         }
 760         return 0;
 761 }
 762 #endif
 763
 764 /* Wait until all the URBs for a particular device/endpoint are gone */
 765 static void uhci_hcd_endpoint_disable(struct usb_hcd *hcd,
 766                 struct usb_host_endpoint *ep)
 767 {
 768         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 769
 770         wait_event_interruptible(uhci->waitqh, list_empty(&ep->urb_list));
 771 }
 772
 773 static int uhci_hcd_get_frame_number(struct usb_hcd *hcd)
 774 {
 775         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 776         unsigned long flags;
 777         int is_stopped;
 778         int frame_number;
 779
 780         /* Minimize latency by avoiding the spinlock */
 781         local_irq_save(flags);
 782         is_stopped = uhci->is_stopped;
 783         smp_rmb();
 784         frame_number = (is_stopped ? uhci->frame_number :
 785                         inw(uhci->io_addr + USBFRNUM));
 786         local_irq_restore(flags);
 787         return frame_number;
 788 }
 789
 790 static const char hcd_name[] = "uhci_hcd";
 791
 792 static const struct hc_driver uhci_driver = {
 793         .description =          hcd_name,
 794         .product_desc =         "UHCI Host Controller",
 795         .hcd_priv_size =        sizeof(struct uhci_hcd),
 796
 797         /* Generic hardware linkage */
 798         .irq =                  uhci_irq,
 799         .flags =                HCD_USB11,
 800
 801         /* Basic lifecycle operations */
 802         .reset =                uhci_reset,
 803         .start =                uhci_start,
 804 #ifdef CONFIG_PM
 805         .suspend =              uhci_suspend,
 806         .resume =               uhci_resume,
 807         .bus_suspend =          uhci_rh_suspend,
 808         .bus_resume =           uhci_rh_resume,
 809 #endif
 810         .stop =                 uhci_stop,
 811
 812         .urb_enqueue =          uhci_urb_enqueue,
 813         .urb_dequeue =          uhci_urb_dequeue,
 814
 815         .endpoint_disable =     uhci_hcd_endpoint_disable,
 816         .get_frame_number =     uhci_hcd_get_frame_number,
 817
 818         .hub_status_data =      uhci_hub_status_data,
 819         .hub_control =          uhci_hub_control,
 820 };
 821
 822 static const struct pci_device_id uhci_pci_ids[] = { {
 823         /* handle any USB UHCI controller */
 824         PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x00), ~0),
 825         .driver_data =  (unsigned long) &uhci_driver,
 826         }, { /* end: all zeroes */ }
 827 };
 828
 829 MODULE_DEVICE_TABLE(pci, uhci_pci_ids);
 830
 831 static struct pci_driver uhci_pci_driver = {
 832         .name =         (char *)hcd_name,
 833         .id_table =     uhci_pci_ids,
 834
 835         .probe =        usb_hcd_pci_probe,
 836         .remove =       usb_hcd_pci_remove,
 837         .shutdown =     uhci_shutdown,
 838
 839 #ifdef  CONFIG_PM
 840         .suspend =      usb_hcd_pci_suspend,
 841         .resume =       usb_hcd_pci_resume,
 842 #endif  /* PM */
 843 };
 844
 845 static int __init uhci_hcd_init(void)
 846 {
 847         int retval = -ENOMEM;
 848
 849         printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION "\n");
 850
 851         if (usb_disabled())
 852                 return -ENODEV;
 853
 854         if (debug) {
 855                 errbuf = kmalloc(ERRBUF_LEN, GFP_KERNEL);
 856                 if (!errbuf)
 857                         goto errbuf_failed;
 858         }
 859
 860         uhci_debugfs_root = debugfs_create_dir("uhci", NULL);
 861         if (!uhci_debugfs_root)
 862                 goto debug_failed;
 863
 864         uhci_up_cachep = kmem_cache_create("uhci_urb_priv",
 865                 sizeof(struct urb_priv), 0, 0, NULL, NULL);
 866         if (!uhci_up_cachep)
 867                 goto up_failed;
 868
 869         retval = pci_register_driver(&uhci_pci_driver);
 870         if (retval)
 871                 goto init_failed;
 872
 873         return 0;
 874
 875 init_failed:
 876         if (kmem_cache_destroy(uhci_up_cachep))
 877                 warn("not all urb_priv's were freed!");
 878
 879 up_failed:
 880         debugfs_remove(uhci_debugfs_root);
 881
 882 debug_failed:
 883         kfree(errbuf);
 884
 885 errbuf_failed:
 886
 887         return retval;
 888 }
 889
 890 static void __exit uhci_hcd_cleanup(void)
 891 {
 892         pci_unregister_driver(&uhci_pci_driver);
 893
 894         if (kmem_cache_destroy(uhci_up_cachep))
 895                 warn("not all urb_priv's were freed!");
 896
 897         debugfs_remove(uhci_debugfs_root);
 898         kfree(errbuf);
 899 }
 900
 901 module_init(uhci_hcd_init);
 902 module_exit(uhci_hcd_cleanup);
 903
 904 MODULE_AUTHOR(DRIVER_AUTHOR);
 905 MODULE_DESCRIPTION(DRIVER_DESC);
 906 MODULE_LICENSE("GPL");