Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
[linux-2.6] / drivers / scsi / sun3_scsi.c
1 /*
2  * Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl)
3  *
4  * Sun3 DMA routines added by Sam Creasey (sammy@sammy.net)
5  *
6  * Adapted from mac_scsinew.c:
7  */
8 /*
9  * Generic Macintosh NCR5380 driver
10  *
11  * Copyright 1998, Michael Schmitz <mschmitz@lbl.gov>
12  *
13  * derived in part from:
14  */
15 /*
16  * Generic Generic NCR5380 driver
17  *
18  * Copyright 1995, Russell King
19  *
20  * ALPHA RELEASE 1.
21  *
22  * For more information, please consult
23  *
24  * NCR 5380 Family
25  * SCSI Protocol Controller
26  * Databook
27  *
28  * NCR Microelectronics
29  * 1635 Aeroplaza Drive
30  * Colorado Springs, CO 80916
31  * 1+ (719) 578-3400
32  * 1+ (800) 334-5454
33  */
34
35
36 /*
37  * This is from mac_scsi.h, but hey, maybe this is useful for Sun3 too! :)
38  *
39  * Options :
40  *
41  * PARITY - enable parity checking.  Not supported.
42  *
43  * SCSI2 - enable support for SCSI-II tagged queueing.  Untested.
44  *
45  * USLEEP - enable support for devices that don't disconnect.  Untested.
46  */
47
48 /*
49  * $Log: sun3_NCR5380.c,v $
50  */
51
52 #define AUTOSENSE
53
54 #include <linux/types.h>
55 #include <linux/stddef.h>
56 #include <linux/ctype.h>
57 #include <linux/delay.h>
58
59 #include <linux/module.h>
60 #include <linux/signal.h>
61 #include <linux/ioport.h>
62 #include <linux/init.h>
63 #include <linux/blkdev.h>
64
65 #include <asm/io.h>
66 #include <asm/system.h>
67
68 #include <asm/sun3ints.h>
69 #include <asm/dvma.h>
70 #include <asm/idprom.h>
71 #include <asm/machines.h>
72
73 /* dma on! */
74 #define REAL_DMA
75
76 #include "scsi.h"
77 #include "initio.h"
78 #include <scsi/scsi_host.h>
79 #include "sun3_scsi.h"
80
81 static void NCR5380_print(struct Scsi_Host *instance);
82
83 /* #define OLDDMA */
84
85 #define USE_WRAPPER
86 /*#define RESET_BOOT */
87 #define DRIVER_SETUP
88
89 #define NDEBUG 0
90
91 /*
92  * BUG can be used to trigger a strange code-size related hang on 2.1 kernels
93  */
94 #ifdef BUG
95 #undef RESET_BOOT
96 #undef DRIVER_SETUP
97 #endif
98
99 /* #define SUPPORT_TAGS */
100
101 #define ENABLE_IRQ()    enable_irq( IRQ_SUN3_SCSI ); 
102
103
104 static irqreturn_t scsi_sun3_intr(int irq, void *dummy);
105 static inline unsigned char sun3scsi_read(int reg);
106 static inline void sun3scsi_write(int reg, int value);
107
108 static int setup_can_queue = -1;
109 module_param(setup_can_queue, int, 0);
110 static int setup_cmd_per_lun = -1;
111 module_param(setup_cmd_per_lun, int, 0);
112 static int setup_sg_tablesize = -1;
113 module_param(setup_sg_tablesize, int, 0);
114 #ifdef SUPPORT_TAGS
115 static int setup_use_tagged_queuing = -1;
116 module_param(setup_use_tagged_queuing, int, 0);
117 #endif
118 static int setup_hostid = -1;
119 module_param(setup_hostid, int, 0);
120
121 static struct scsi_cmnd *sun3_dma_setup_done = NULL;
122
123 #define AFTER_RESET_DELAY       (HZ/2)
124
125 /* ms to wait after hitting dma regs */
126 #define SUN3_DMA_DELAY 10
127
128 /* dvma buffer to allocate -- 32k should hopefully be more than sufficient */
129 #define SUN3_DVMA_BUFSIZE 0xe000
130
131 /* minimum number of bytes to do dma on */
132 #define SUN3_DMA_MINSIZE 128
133
134 static volatile unsigned char *sun3_scsi_regp;
135 static volatile struct sun3_dma_regs *dregs;
136 #ifdef OLDDMA
137 static unsigned char *dmabuf = NULL; /* dma memory buffer */
138 #endif
139 static struct sun3_udc_regs *udc_regs = NULL;
140 static unsigned char *sun3_dma_orig_addr = NULL;
141 static unsigned long sun3_dma_orig_count = 0;
142 static int sun3_dma_active = 0;
143 static unsigned long last_residual = 0;
144
145 /*
146  * NCR 5380 register access functions
147  */
148
149 static inline unsigned char sun3scsi_read(int reg)
150 {
151         return( sun3_scsi_regp[reg] );
152 }
153
154 static inline void sun3scsi_write(int reg, int value)
155 {
156         sun3_scsi_regp[reg] = value;
157 }
158
159 /* dma controller register access functions */
160
161 static inline unsigned short sun3_udc_read(unsigned char reg)
162 {
163         unsigned short ret;
164
165         dregs->udc_addr = UDC_CSR;
166         udelay(SUN3_DMA_DELAY);
167         ret = dregs->udc_data;
168         udelay(SUN3_DMA_DELAY);
169         
170         return ret;
171 }
172
173 static inline void sun3_udc_write(unsigned short val, unsigned char reg)
174 {
175         dregs->udc_addr = reg;
176         udelay(SUN3_DMA_DELAY);
177         dregs->udc_data = val;
178         udelay(SUN3_DMA_DELAY);
179 }
180
181 /*
182  * XXX: status debug
183  */
184 static struct Scsi_Host *default_instance;
185
186 /*
187  * Function : int sun3scsi_detect(struct scsi_host_template * tpnt)
188  *
189  * Purpose : initializes mac NCR5380 driver based on the
190  *      command line / compile time port and irq definitions.
191  *
192  * Inputs : tpnt - template for this SCSI adapter.
193  *
194  * Returns : 1 if a host adapter was found, 0 if not.
195  *
196  */
197  
198 int sun3scsi_detect(struct scsi_host_template * tpnt)
199 {
200         unsigned long ioaddr;
201         static int called = 0;
202         struct Scsi_Host *instance;
203
204         /* check that this machine has an onboard 5380 */
205         switch(idprom->id_machtype) {
206         case SM_SUN3|SM_3_50:
207         case SM_SUN3|SM_3_60:
208                 break;
209
210         default:
211                 return 0;
212         }
213
214         if(called)
215                 return 0;
216
217         tpnt->proc_name = "Sun3 5380 SCSI";
218
219         /* setup variables */
220         tpnt->can_queue =
221                 (setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE;
222         tpnt->cmd_per_lun =
223                 (setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN;
224         tpnt->sg_tablesize = 
225                 (setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE;
226
227         if (setup_hostid >= 0)
228                 tpnt->this_id = setup_hostid;
229         else {
230                 /* use 7 as default */
231                 tpnt->this_id = 7;
232         }
233
234         ioaddr = (unsigned long)ioremap(IOBASE_SUN3_SCSI, PAGE_SIZE);
235         sun3_scsi_regp = (unsigned char *)ioaddr;
236
237         dregs = (struct sun3_dma_regs *)(((unsigned char *)ioaddr) + 8);
238
239         if((udc_regs = dvma_malloc(sizeof(struct sun3_udc_regs)))
240            == NULL) {
241              printk("SUN3 Scsi couldn't allocate DVMA memory!\n");
242              return 0;
243         }
244 #ifdef OLDDMA
245         if((dmabuf = dvma_malloc_align(SUN3_DVMA_BUFSIZE, 0x10000)) == NULL) {
246              printk("SUN3 Scsi couldn't allocate DVMA memory!\n");
247              return 0;
248         }
249 #endif
250 #ifdef SUPPORT_TAGS
251         if (setup_use_tagged_queuing < 0)
252                 setup_use_tagged_queuing = USE_TAGGED_QUEUING;
253 #endif
254
255         instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
256         if(instance == NULL)
257                 return 0;
258                 
259         default_instance = instance;
260
261         instance->io_port = (unsigned long) ioaddr;
262         instance->irq = IRQ_SUN3_SCSI;
263
264         NCR5380_init(instance, 0);
265
266         instance->n_io_port = 32;
267
268         ((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;
269
270         if (request_irq(instance->irq, scsi_sun3_intr,
271                              0, "Sun3SCSI-5380", instance)) {
272 #ifndef REAL_DMA
273                 printk("scsi%d: IRQ%d not free, interrupts disabled\n",
274                        instance->host_no, instance->irq);
275                 instance->irq = SCSI_IRQ_NONE;
276 #else
277                 printk("scsi%d: IRQ%d not free, bailing out\n",
278                        instance->host_no, instance->irq);
279                 return 0;
280 #endif
281         }
282         
283         printk("scsi%d: Sun3 5380 at port %lX irq", instance->host_no, instance->io_port);
284         if (instance->irq == SCSI_IRQ_NONE)
285                 printk ("s disabled");
286         else
287                 printk (" %d", instance->irq);
288         printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
289                instance->can_queue, instance->cmd_per_lun,
290                SUN3SCSI_PUBLIC_RELEASE);
291         printk("\nscsi%d:", instance->host_no);
292         NCR5380_print_options(instance);
293         printk("\n");
294
295         dregs->csr = 0;
296         udelay(SUN3_DMA_DELAY);
297         dregs->csr = CSR_SCSI | CSR_FIFO | CSR_INTR;
298         udelay(SUN3_DMA_DELAY);
299         dregs->fifo_count = 0;
300
301         called = 1;
302
303 #ifdef RESET_BOOT
304         sun3_scsi_reset_boot(instance);
305 #endif
306
307         return 1;
308 }
309
310 int sun3scsi_release (struct Scsi_Host *shpnt)
311 {
312         if (shpnt->irq != SCSI_IRQ_NONE)
313                 free_irq(shpnt->irq, shpnt);
314
315         iounmap((void *)sun3_scsi_regp);
316
317         return 0;
318 }
319
320 #ifdef RESET_BOOT
321 /*
322  * Our 'bus reset on boot' function
323  */
324
325 static void sun3_scsi_reset_boot(struct Scsi_Host *instance)
326 {
327         unsigned long end;
328
329         NCR5380_local_declare();
330         NCR5380_setup(instance);
331         
332         /*
333          * Do a SCSI reset to clean up the bus during initialization. No
334          * messing with the queues, interrupts, or locks necessary here.
335          */
336
337         printk( "Sun3 SCSI: resetting the SCSI bus..." );
338
339         /* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */
340 //              sun3_disable_irq( IRQ_SUN3_SCSI );
341
342         /* get in phase */
343         NCR5380_write( TARGET_COMMAND_REG,
344                       PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
345
346         /* assert RST */
347         NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
348
349         /* The min. reset hold time is 25us, so 40us should be enough */
350         udelay( 50 );
351
352         /* reset RST and interrupt */
353         NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
354         NCR5380_read( RESET_PARITY_INTERRUPT_REG );
355
356         for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); )
357                 barrier();
358
359         /* switch on SCSI IRQ again */
360 //              sun3_enable_irq( IRQ_SUN3_SCSI );
361
362         printk( " done\n" );
363 }
364 #endif
365
366 const char * sun3scsi_info (struct Scsi_Host *spnt) {
367     return "";
368 }
369
370 // safe bits for the CSR
371 #define CSR_GOOD 0x060f
372
373 static irqreturn_t scsi_sun3_intr(int irq, void *dummy)
374 {
375         unsigned short csr = dregs->csr;
376         int handled = 0;
377
378         if(csr & ~CSR_GOOD) {
379                 if(csr & CSR_DMA_BUSERR) {
380                         printk("scsi%d: bus error in dma\n", default_instance->host_no);
381                 }
382
383                 if(csr & CSR_DMA_CONFLICT) {
384                         printk("scsi%d: dma conflict\n", default_instance->host_no);
385                 }
386                 handled = 1;
387         }
388
389         if(csr & (CSR_SDB_INT | CSR_DMA_INT)) {
390                 NCR5380_intr(irq, dummy);
391                 handled = 1;
392         }
393
394         return IRQ_RETVAL(handled);
395 }
396
397 /*
398  * Debug stuff - to be called on NMI, or sysrq key. Use at your own risk; 
399  * reentering NCR5380_print_status seems to have ugly side effects
400  */
401
402 /* this doesn't seem to get used at all -- sam */
403 #if 0
404 void sun3_sun3_debug (void)
405 {
406         unsigned long flags;
407         NCR5380_local_declare();
408
409         if (default_instance) {
410                         local_irq_save(flags);
411                         NCR5380_print_status(default_instance);
412                         local_irq_restore(flags);
413         }
414 }
415 #endif
416
417
418 /* sun3scsi_dma_setup() -- initialize the dma controller for a read/write */
419 static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int write_flag)
420 {
421 #ifdef OLDDMA
422         if(write_flag) 
423                 memcpy(dmabuf, data, count);
424         else {
425                 sun3_dma_orig_addr = data;
426                 sun3_dma_orig_count = count;
427         }
428 #else
429         void *addr;
430
431         if(sun3_dma_orig_addr != NULL)
432                 dvma_unmap(sun3_dma_orig_addr);
433
434 //      addr = sun3_dvma_page((unsigned long)data, (unsigned long)dmabuf);
435         addr = (void *)dvma_map((unsigned long) data, count);
436                 
437         sun3_dma_orig_addr = addr;
438         sun3_dma_orig_count = count;
439 #endif
440         dregs->fifo_count = 0;
441         sun3_udc_write(UDC_RESET, UDC_CSR);
442         
443         /* reset fifo */
444         dregs->csr &= ~CSR_FIFO;
445         dregs->csr |= CSR_FIFO;
446         
447         /* set direction */
448         if(write_flag)
449                 dregs->csr |= CSR_SEND;
450         else
451                 dregs->csr &= ~CSR_SEND;
452         
453         /* byte count for fifo */
454         dregs->fifo_count = count;
455
456         sun3_udc_write(UDC_RESET, UDC_CSR);
457         
458         /* reset fifo */
459         dregs->csr &= ~CSR_FIFO;
460         dregs->csr |= CSR_FIFO;
461         
462         if(dregs->fifo_count != count) { 
463                 printk("scsi%d: fifo_mismatch %04x not %04x\n",
464                        default_instance->host_no, dregs->fifo_count,
465                        (unsigned int) count);
466                 NCR5380_print(default_instance);
467         }
468
469         /* setup udc */
470 #ifdef OLDDMA
471         udc_regs->addr_hi = ((dvma_vtob(dmabuf) & 0xff0000) >> 8);
472         udc_regs->addr_lo = (dvma_vtob(dmabuf) & 0xffff);
473 #else
474         udc_regs->addr_hi = (((unsigned long)(addr) & 0xff0000) >> 8);
475         udc_regs->addr_lo = ((unsigned long)(addr) & 0xffff);
476 #endif
477         udc_regs->count = count/2; /* count in words */
478         udc_regs->mode_hi = UDC_MODE_HIWORD;
479         if(write_flag) {
480                 if(count & 1)
481                         udc_regs->count++;
482                 udc_regs->mode_lo = UDC_MODE_LSEND;
483                 udc_regs->rsel = UDC_RSEL_SEND;
484         } else {
485                 udc_regs->mode_lo = UDC_MODE_LRECV;
486                 udc_regs->rsel = UDC_RSEL_RECV;
487         }
488         
489         /* announce location of regs block */
490         sun3_udc_write(((dvma_vtob(udc_regs) & 0xff0000) >> 8),
491                        UDC_CHN_HI); 
492
493         sun3_udc_write((dvma_vtob(udc_regs) & 0xffff), UDC_CHN_LO);
494
495         /* set dma master on */
496         sun3_udc_write(0xd, UDC_MODE);
497
498         /* interrupt enable */
499         sun3_udc_write(UDC_INT_ENABLE, UDC_CSR);
500         
501         return count;
502
503 }
504
505 static inline unsigned long sun3scsi_dma_count(struct Scsi_Host *instance)
506 {
507         unsigned short resid;
508
509         dregs->udc_addr = 0x32; 
510         udelay(SUN3_DMA_DELAY);
511         resid = dregs->udc_data;
512         udelay(SUN3_DMA_DELAY);
513         resid *= 2;
514
515         return (unsigned long) resid;
516 }
517
518 static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance)
519 {
520         return last_residual;
521 }
522
523 static inline unsigned long sun3scsi_dma_xfer_len(unsigned long wanted,
524                                                   struct scsi_cmnd *cmd,
525                                                   int write_flag)
526 {
527         if(blk_fs_request(cmd->request))
528                 return wanted;
529         else
530                 return 0;
531 }
532
533 static inline int sun3scsi_dma_start(unsigned long count, unsigned char *data)
534 {
535
536     sun3_udc_write(UDC_CHN_START, UDC_CSR);
537     
538     return 0;
539 }
540
541 /* clean up after our dma is done */
542 static int sun3scsi_dma_finish(int write_flag)
543 {
544         unsigned short count;
545         unsigned short fifo;
546         int ret = 0;
547         
548         sun3_dma_active = 0;
549 #if 1
550         // check to empty the fifo on a read
551         if(!write_flag) {
552                 int tmo = 20000; /* .2 sec */
553                 
554                 while(1) {
555                         if(dregs->csr & CSR_FIFO_EMPTY)
556                                 break;
557
558                         if(--tmo <= 0) {
559                                 printk("sun3scsi: fifo failed to empty!\n");
560                                 return 1;
561                         }
562                         udelay(10);
563                 }
564         }
565                 
566 #endif
567
568         count = sun3scsi_dma_count(default_instance);
569 #ifdef OLDDMA
570
571         /* if we've finished a read, copy out the data we read */
572         if(sun3_dma_orig_addr) {
573                 /* check for residual bytes after dma end */
574                 if(count && (NCR5380_read(BUS_AND_STATUS_REG) &
575                              (BASR_PHASE_MATCH | BASR_ACK))) {
576                         printk("scsi%d: sun3_scsi_finish: read overrun baby... ", default_instance->host_no);
577                         printk("basr now %02x\n", NCR5380_read(BUS_AND_STATUS_REG));
578                         ret = count;
579                 }
580                 
581                 /* copy in what we dma'd no matter what */
582                 memcpy(sun3_dma_orig_addr, dmabuf, sun3_dma_orig_count);
583                 sun3_dma_orig_addr = NULL;
584
585         }
586 #else
587
588         fifo = dregs->fifo_count;
589         last_residual = fifo;
590
591         /* empty bytes from the fifo which didn't make it */
592         if((!write_flag) && (count - fifo) == 2) {
593                 unsigned short data;
594                 unsigned char *vaddr;
595
596                 data = dregs->fifo_data;
597                 vaddr = (unsigned char *)dvma_btov(sun3_dma_orig_addr);
598                 
599                 vaddr += (sun3_dma_orig_count - fifo);
600
601                 vaddr[-2] = (data & 0xff00) >> 8;
602                 vaddr[-1] = (data & 0xff);
603         }
604
605         dvma_unmap(sun3_dma_orig_addr);
606         sun3_dma_orig_addr = NULL;
607 #endif
608         sun3_udc_write(UDC_RESET, UDC_CSR);
609         dregs->fifo_count = 0;
610         dregs->csr &= ~CSR_SEND;
611
612         /* reset fifo */
613         dregs->csr &= ~CSR_FIFO;
614         dregs->csr |= CSR_FIFO;
615         
616         sun3_dma_setup_done = NULL;
617
618         return ret;
619
620 }
621         
622 #include "sun3_NCR5380.c"
623
624 static struct scsi_host_template driver_template = {
625         .name                   = SUN3_SCSI_NAME,
626         .detect                 = sun3scsi_detect,
627         .release                = sun3scsi_release,
628         .info                   = sun3scsi_info,
629         .queuecommand           = sun3scsi_queue_command,
630         .eh_abort_handler       = sun3scsi_abort,
631         .eh_bus_reset_handler   = sun3scsi_bus_reset,
632         .can_queue              = CAN_QUEUE,
633         .this_id                = 7,
634         .sg_tablesize           = SG_TABLESIZE,
635         .cmd_per_lun            = CMD_PER_LUN,
636         .use_clustering         = DISABLE_CLUSTERING
637 };
638
639
640 #include "scsi_module.c"
641
642 MODULE_LICENSE("GPL");