2 * linux/arch/arm/mach-pxa/lubbock.c
4 * Support for the Intel DBPXA250 Development Platform.
6 * Author: Nicolas Pitre
7 * Created: Jun 15, 2001
8 * Copyright: MontaVista Software Inc.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/sysdev.h>
19 #include <linux/major.h>
21 #include <linux/interrupt.h>
22 #include <linux/mtd/mtd.h>
23 #include <linux/mtd/partitions.h>
25 #include <linux/spi/spi.h>
26 #include <linux/spi/ads7846.h>
27 #include <asm/arch/pxa2xx_spi.h>
29 #include <asm/setup.h>
30 #include <asm/memory.h>
31 #include <asm/mach-types.h>
32 #include <asm/hardware.h>
34 #include <asm/sizes.h>
36 #include <asm/mach/arch.h>
37 #include <asm/mach/map.h>
38 #include <asm/mach/irq.h>
39 #include <asm/mach/flash.h>
41 #include <asm/hardware/sa1111.h>
43 #include <asm/arch/pxa-regs.h>
44 #include <asm/arch/lubbock.h>
45 #include <asm/arch/udc.h>
46 #include <asm/arch/irda.h>
47 #include <asm/arch/pxafb.h>
48 #include <asm/arch/mmc.h>
53 #define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
55 void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
59 local_irq_save(flags);
60 LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask);
61 local_irq_restore(flags);
63 EXPORT_SYMBOL(lubbock_set_misc_wr);
65 static unsigned long lubbock_irq_enabled;
67 static void lubbock_mask_irq(unsigned int irq)
69 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
70 LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
73 static void lubbock_unmask_irq(unsigned int irq)
75 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
76 /* the irq can be acknowledged only if deasserted, so it's done here */
77 LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
78 LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
81 static struct irqchip lubbock_irq_chip = {
82 .ack = lubbock_mask_irq,
83 .mask = lubbock_mask_irq,
84 .unmask = lubbock_unmask_irq,
87 static void lubbock_irq_handler(unsigned int irq, struct irqdesc *desc,
90 unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
92 GEDR(0) = GPIO_bit(0); /* clear our parent irq */
93 if (likely(pending)) {
94 irq = LUBBOCK_IRQ(0) + __ffs(pending);
95 desc = irq_desc + irq;
96 desc_handle_irq(irq, desc, regs);
98 pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
102 static void __init lubbock_init_irq(void)
108 /* setup extra lubbock irqs */
109 for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
110 set_irq_chip(irq, &lubbock_irq_chip);
111 set_irq_handler(irq, do_level_IRQ);
112 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
115 set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
116 set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
121 static int lubbock_irq_resume(struct sys_device *dev)
123 LUB_IRQ_MASK_EN = lubbock_irq_enabled;
127 static struct sysdev_class lubbock_irq_sysclass = {
128 set_kset_name("cpld_irq"),
129 .resume = lubbock_irq_resume,
132 static struct sys_device lubbock_irq_device = {
133 .cls = &lubbock_irq_sysclass,
136 static int __init lubbock_irq_device_init(void)
138 int ret = sysdev_class_register(&lubbock_irq_sysclass);
140 ret = sysdev_register(&lubbock_irq_device);
144 device_initcall(lubbock_irq_device_init);
148 static int lubbock_udc_is_connected(void)
150 return (LUB_MISC_RD & (1 << 9)) == 0;
153 static struct pxa2xx_udc_mach_info udc_info __initdata = {
154 .udc_is_connected = lubbock_udc_is_connected,
155 // no D+ pullup; lubbock can't connect/disconnect in software
158 static struct platform_device lub_audio_device = {
159 .name = "pxa2xx-ac97",
163 static struct resource sa1111_resources[] = {
167 .flags = IORESOURCE_MEM,
170 .start = LUBBOCK_SA1111_IRQ,
171 .end = LUBBOCK_SA1111_IRQ,
172 .flags = IORESOURCE_IRQ,
176 static struct platform_device sa1111_device = {
179 .num_resources = ARRAY_SIZE(sa1111_resources),
180 .resource = sa1111_resources,
183 static struct resource smc91x_resources[] = {
185 .name = "smc91x-regs",
188 .flags = IORESOURCE_MEM,
191 .start = LUBBOCK_ETH_IRQ,
192 .end = LUBBOCK_ETH_IRQ,
193 .flags = IORESOURCE_IRQ,
196 .name = "smc91x-attrib",
199 .flags = IORESOURCE_MEM,
203 /* ADS7846 is connected through SSP ... and if your board has J5 populated,
204 * you can select it to replace the ucb1400 by switching the touchscreen cable
205 * (to J5) and poking board registers (as done below). Else it's only useful
206 * for the temperature sensors.
208 static struct resource pxa_ssp_resources[] = {
210 .start = __PREG(SSCR0_P(1)),
211 .end = __PREG(SSCR0_P(1)) + 0x14,
212 .flags = IORESOURCE_MEM,
217 .flags = IORESOURCE_IRQ,
221 static struct pxa2xx_spi_master pxa_ssp_master_info = {
222 .ssp_type = PXA25x_SSP,
223 .clock_enable = CKEN3_SSP,
227 static struct platform_device pxa_ssp = {
228 .name = "pxa2xx-spi",
230 .resource = pxa_ssp_resources,
231 .num_resources = ARRAY_SIZE(pxa_ssp_resources),
233 .platform_data = &pxa_ssp_master_info,
237 static int lubbock_ads7846_pendown_state(void)
239 /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
243 static struct ads7846_platform_data ads_info = {
245 .vref_delay_usecs = 100, /* internal, no cap */
246 .get_pendown_state = lubbock_ads7846_pendown_state,
247 // .x_plate_ohms = 500, /* GUESS! */
248 // .y_plate_ohms = 500, /* GUESS! */
251 static void ads7846_cs(u32 command)
253 static const unsigned TS_nCS = 1 << 11;
254 lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
257 static struct pxa2xx_spi_chip ads_hw = {
260 .cs_control = ads7846_cs,
263 static struct spi_board_info spi_board_info[] __initdata = { {
264 .modalias = "ads7846",
265 .platform_data = &ads_info,
266 .controller_data = &ads_hw,
267 .irq = LUBBOCK_BB_IRQ,
268 .max_speed_hz = 120000 /* max sample rate at 3V */
269 * 26 /* command + data + overhead */,
275 static struct platform_device smc91x_device = {
278 .num_resources = ARRAY_SIZE(smc91x_resources),
279 .resource = smc91x_resources,
282 static struct resource flash_resources[] = {
286 .flags = IORESOURCE_MEM,
290 .end = 0x04000000 + SZ_64M - 1,
291 .flags = IORESOURCE_MEM,
295 static struct mtd_partition lubbock_partitions[] = {
297 .name = "Bootloader",
300 .mask_flags = MTD_WRITEABLE /* force read-only */
304 .offset = 0x00040000,
306 .name = "Filesystem",
307 .size = MTDPART_SIZ_FULL,
312 static struct flash_platform_data lubbock_flash_data[2] = {
314 .map_name = "cfi_probe",
315 .parts = lubbock_partitions,
316 .nr_parts = ARRAY_SIZE(lubbock_partitions),
318 .map_name = "cfi_probe",
324 static struct platform_device lubbock_flash_device[2] = {
326 .name = "pxa2xx-flash",
329 .platform_data = &lubbock_flash_data[0],
331 .resource = &flash_resources[0],
335 .name = "pxa2xx-flash",
338 .platform_data = &lubbock_flash_data[1],
340 .resource = &flash_resources[1],
345 static struct platform_device *devices[] __initdata = {
349 &lubbock_flash_device[0],
350 &lubbock_flash_device[1],
354 static struct pxafb_mach_info sharp_lm8v31 __initdata = {
365 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
370 .lccr3 = LCCR3_PCP | LCCR3_Acb(255),
373 #define MMC_POLL_RATE msecs_to_jiffies(1000)
375 static void lubbock_mmc_poll(unsigned long);
376 static irqreturn_t (*mmc_detect_int)(int, void *, struct pt_regs *);
378 static struct timer_list mmc_timer = {
379 .function = lubbock_mmc_poll,
382 static void lubbock_mmc_poll(unsigned long data)
386 /* clear any previous irq state, then ... */
387 local_irq_save(flags);
388 LUB_IRQ_SET_CLR &= ~(1 << 0);
389 local_irq_restore(flags);
391 /* poll until mmc/sd card is removed */
392 if (LUB_IRQ_SET_CLR & (1 << 0))
393 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
395 (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data, NULL);
396 enable_irq(LUBBOCK_SD_IRQ);
400 static irqreturn_t lubbock_detect_int(int irq, void *data, struct pt_regs *regs)
402 /* IRQ is level triggered; disable, and poll for removal */
404 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
406 return mmc_detect_int(irq, data, regs);
409 static int lubbock_mci_init(struct device *dev,
410 irqreturn_t (*detect_int)(int, void *, struct pt_regs *),
413 /* setup GPIO for PXA25x MMC controller */
414 pxa_gpio_mode(GPIO6_MMCCLK_MD);
415 pxa_gpio_mode(GPIO8_MMCCS0_MD);
417 /* detect card insert/eject */
418 mmc_detect_int = detect_int;
419 init_timer(&mmc_timer);
420 mmc_timer.data = (unsigned long) data;
421 return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
422 IRQF_SAMPLE_RANDOM, "lubbock-sd-detect", data);
425 static int lubbock_mci_get_ro(struct device *dev)
427 return (LUB_MISC_RD & (1 << 2)) != 0;
430 static void lubbock_mci_exit(struct device *dev, void *data)
432 free_irq(LUBBOCK_SD_IRQ, data);
433 del_timer_sync(&mmc_timer);
436 static struct pxamci_platform_data lubbock_mci_platform_data = {
437 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
439 .init = lubbock_mci_init,
440 .get_ro = lubbock_mci_get_ro,
441 .exit = lubbock_mci_exit,
444 static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
448 local_irq_save(flags);
449 if (mode & IR_SIRMODE) {
450 LUB_MISC_WR &= ~(1 << 4);
451 } else if (mode & IR_FIRMODE) {
452 LUB_MISC_WR |= 1 << 4;
454 local_irq_restore(flags);
457 static struct pxaficp_platform_data lubbock_ficp_platform_data = {
458 .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
459 .transceiver_mode = lubbock_irda_transceiver_mode,
462 static void __init lubbock_init(void)
464 int flashboot = (LUB_CONF_SWITCHES & 1);
466 pxa_set_udc_info(&udc_info);
467 set_pxa_fb_info(&sharp_lm8v31);
468 pxa_set_mci_info(&lubbock_mci_platform_data);
469 pxa_set_ficp_info(&lubbock_ficp_platform_data);
471 lubbock_flash_data[0].width = lubbock_flash_data[1].width =
472 (BOOT_DEF & 1) ? 2 : 4;
473 /* Compensate for the nROMBT switch which swaps the flash banks */
474 printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
475 flashboot?"Flash":"ROM", flashboot);
477 lubbock_flash_data[flashboot^1].name = "application-flash";
478 lubbock_flash_data[flashboot].name = "boot-rom";
479 (void) platform_add_devices(devices, ARRAY_SIZE(devices));
481 spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
484 static struct map_desc lubbock_io_desc[] __initdata = {
486 .virtual = LUBBOCK_FPGA_VIRT,
487 .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
488 .length = 0x00100000,
493 static void __init lubbock_map_io(void)
496 iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
499 pxa_gpio_mode(GPIO23_SCLK_MD);
500 pxa_gpio_mode(GPIO25_STXD_MD);
501 pxa_gpio_mode(GPIO26_SRXD_MD);
503 /* This enables the BTUART */
504 pxa_gpio_mode(GPIO42_BTRXD_MD);
505 pxa_gpio_mode(GPIO43_BTTXD_MD);
506 pxa_gpio_mode(GPIO44_BTCTS_MD);
507 pxa_gpio_mode(GPIO45_BTRTS_MD);
509 /* This is for the SMC chip select */
510 pxa_gpio_mode(GPIO79_nCS_3_MD);
512 /* setup sleep mode values */
522 MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
523 /* Maintainer: MontaVista Software Inc. */
524 .phys_io = 0x40000000,
525 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
526 .map_io = lubbock_map_io,
527 .init_irq = lubbock_init_irq,
529 .init_machine = lubbock_init,