Remove all inclusions of <linux/config.h>
[linux-2.6] / arch / um / kernel / trap.c
1 /*
2  * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
3  * Licensed under the GPL
4  */
5
6 #include "linux/kernel.h"
7 #include "asm/errno.h"
8 #include "linux/sched.h"
9 #include "linux/mm.h"
10 #include "linux/spinlock.h"
11 #include "linux/init.h"
12 #include "linux/ptrace.h"
13 #include "asm/semaphore.h"
14 #include "asm/pgtable.h"
15 #include "asm/pgalloc.h"
16 #include "asm/tlbflush.h"
17 #include "asm/a.out.h"
18 #include "asm/current.h"
19 #include "asm/irq.h"
20 #include "sysdep/sigcontext.h"
21 #include "user_util.h"
22 #include "kern_util.h"
23 #include "kern.h"
24 #include "chan_kern.h"
25 #include "mconsole_kern.h"
26 #include "mem.h"
27 #include "mem_kern.h"
28 #include "sysdep/sigcontext.h"
29 #include "sysdep/ptrace.h"
30 #include "os.h"
31 #ifdef CONFIG_MODE_SKAS
32 #include "skas.h"
33 #endif
34 #include "os.h"
35
36 /* Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by segv(). */
37 int handle_page_fault(unsigned long address, unsigned long ip,
38                       int is_write, int is_user, int *code_out)
39 {
40         struct mm_struct *mm = current->mm;
41         struct vm_area_struct *vma;
42         pgd_t *pgd;
43         pud_t *pud;
44         pmd_t *pmd;
45         pte_t *pte;
46         int err = -EFAULT;
47
48         *code_out = SEGV_MAPERR;
49
50         /* If the fault was during atomic operation, don't take the fault, just
51          * fail. */
52         if (in_atomic())
53                 goto out_nosemaphore;
54
55         down_read(&mm->mmap_sem);
56         vma = find_vma(mm, address);
57         if(!vma)
58                 goto out;
59         else if(vma->vm_start <= address)
60                 goto good_area;
61         else if(!(vma->vm_flags & VM_GROWSDOWN))
62                 goto out;
63         else if(is_user && !ARCH_IS_STACKGROW(address))
64                 goto out;
65         else if(expand_stack(vma, address))
66                 goto out;
67
68 good_area:
69         *code_out = SEGV_ACCERR;
70         if(is_write && !(vma->vm_flags & VM_WRITE))
71                 goto out;
72
73         /* Don't require VM_READ|VM_EXEC for write faults! */
74         if(!is_write && !(vma->vm_flags & (VM_READ | VM_EXEC)))
75                 goto out;
76
77         do {
78 survive:
79                 switch (handle_mm_fault(mm, vma, address, is_write)){
80                 case VM_FAULT_MINOR:
81                         current->min_flt++;
82                         break;
83                 case VM_FAULT_MAJOR:
84                         current->maj_flt++;
85                         break;
86                 case VM_FAULT_SIGBUS:
87                         err = -EACCES;
88                         goto out;
89                 case VM_FAULT_OOM:
90                         err = -ENOMEM;
91                         goto out_of_memory;
92                 default:
93                         BUG();
94                 }
95                 pgd = pgd_offset(mm, address);
96                 pud = pud_offset(pgd, address);
97                 pmd = pmd_offset(pud, address);
98                 pte = pte_offset_kernel(pmd, address);
99         } while(!pte_present(*pte));
100         err = 0;
101         /* The below warning was added in place of
102          *      pte_mkyoung(); if (is_write) pte_mkdirty();
103          * If it's triggered, we'd see normally a hang here (a clean pte is
104          * marked read-only to emulate the dirty bit).
105          * However, the generic code can mark a PTE writable but clean on a
106          * concurrent read fault, triggering this harmlessly. So comment it out.
107          */
108 #if 0
109         WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte)));
110 #endif
111         flush_tlb_page(vma, address);
112 out:
113         up_read(&mm->mmap_sem);
114 out_nosemaphore:
115         return(err);
116
117 /*
118  * We ran out of memory, or some other thing happened to us that made
119  * us unable to handle the page fault gracefully.
120  */
121 out_of_memory:
122         if (is_init(current)) {
123                 up_read(&mm->mmap_sem);
124                 yield();
125                 down_read(&mm->mmap_sem);
126                 goto survive;
127         }
128         goto out;
129 }
130
131 void segv_handler(int sig, union uml_pt_regs *regs)
132 {
133         struct faultinfo * fi = UPT_FAULTINFO(regs);
134
135         if(UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)){
136                 bad_segv(*fi, UPT_IP(regs));
137                 return;
138         }
139         segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs);
140 }
141
142 /*
143  * We give a *copy* of the faultinfo in the regs to segv.
144  * This must be done, since nesting SEGVs could overwrite
145  * the info in the regs. A pointer to the info then would
146  * give us bad data!
147  */
148 unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc)
149 {
150         struct siginfo si;
151         void *catcher;
152         int err;
153         int is_write = FAULT_WRITE(fi);
154         unsigned long address = FAULT_ADDRESS(fi);
155
156         if(!is_user && (address >= start_vm) && (address < end_vm)){
157                 flush_tlb_kernel_vm();
158                 return(0);
159         }
160         else if(current->mm == NULL)
161                 panic("Segfault with no mm");
162
163         if (SEGV_IS_FIXABLE(&fi) || SEGV_MAYBE_FIXABLE(&fi))
164                 err = handle_page_fault(address, ip, is_write, is_user, &si.si_code);
165         else {
166                 err = -EFAULT;
167                 /* A thread accessed NULL, we get a fault, but CR2 is invalid.
168                  * This code is used in __do_copy_from_user() of TT mode. */
169                 address = 0;
170         }
171
172         catcher = current->thread.fault_catcher;
173         if(!err)
174                 return(0);
175         else if(catcher != NULL){
176                 current->thread.fault_addr = (void *) address;
177                 do_longjmp(catcher, 1);
178         }
179         else if(current->thread.fault_addr != NULL)
180                 panic("fault_addr set but no fault catcher");
181         else if(!is_user && arch_fixup(ip, sc))
182                 return(0);
183
184         if(!is_user)
185                 panic("Kernel mode fault at addr 0x%lx, ip 0x%lx",
186                       address, ip);
187
188         if (err == -EACCES) {
189                 si.si_signo = SIGBUS;
190                 si.si_errno = 0;
191                 si.si_code = BUS_ADRERR;
192                 si.si_addr = (void __user *)address;
193                 current->thread.arch.faultinfo = fi;
194                 force_sig_info(SIGBUS, &si, current);
195         } else if (err == -ENOMEM) {
196                 printk("VM: killing process %s\n", current->comm);
197                 do_exit(SIGKILL);
198         } else {
199                 BUG_ON(err != -EFAULT);
200                 si.si_signo = SIGSEGV;
201                 si.si_addr = (void __user *) address;
202                 current->thread.arch.faultinfo = fi;
203                 force_sig_info(SIGSEGV, &si, current);
204         }
205         return(0);
206 }
207
208 void bad_segv(struct faultinfo fi, unsigned long ip)
209 {
210         struct siginfo si;
211
212         si.si_signo = SIGSEGV;
213         si.si_code = SEGV_ACCERR;
214         si.si_addr = (void __user *) FAULT_ADDRESS(fi);
215         current->thread.arch.faultinfo = fi;
216         force_sig_info(SIGSEGV, &si, current);
217 }
218
219 void relay_signal(int sig, union uml_pt_regs *regs)
220 {
221         if(arch_handle_signal(sig, regs))
222                 return;
223
224         if(!UPT_IS_USER(regs)){
225                 if(sig == SIGBUS)
226                         printk("Bus error - the /dev/shm or /tmp mount likely "
227                                "just ran out of space\n");
228                 panic("Kernel mode signal %d", sig);
229         }
230
231         current->thread.arch.faultinfo = *UPT_FAULTINFO(regs);
232         force_sig(sig, current);
233 }
234
235 void bus_handler(int sig, union uml_pt_regs *regs)
236 {
237         if(current->thread.fault_catcher != NULL)
238                 do_longjmp(current->thread.fault_catcher, 1);
239         else relay_signal(sig, regs);
240 }
241
242 void winch(int sig, union uml_pt_regs *regs)
243 {
244         do_IRQ(WINCH_IRQ, regs);
245 }
246
247 const struct kern_handlers handlinfo_kern = {
248         .relay_signal = relay_signal,
249         .winch = winch,
250         .bus_handler = bus_handler,
251         .page_fault = segv_handler,
252         .sigio_handler = sigio_handler,
253         .timer_handler = timer_handler
254 };
255
256 void trap_init(void)
257 {
258 }