git.oblomov.eu Git - linux-2.6/blob - drivers/staging/et131x/et1310_rx.c

   1 /*
   2  * Agere Systems Inc.
   3  * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
   4  *
   5  * Copyright © 2005 Agere Systems Inc.
   6  * All rights reserved.
   7  *   http://www.agere.com
   8  *
   9  *------------------------------------------------------------------------------
  10  *
  11  * et1310_rx.c - Routines used to perform data reception
  12  *
  13  *------------------------------------------------------------------------------
  14  *
  15  * SOFTWARE LICENSE
  16  *
  17  * This software is provided subject to the following terms and conditions,
  18  * which you should read carefully before using the software.  Using this
  19  * software indicates your acceptance of these terms and conditions.  If you do
  20  * not agree with these terms and conditions, do not use the software.
  21  *
  22  * Copyright © 2005 Agere Systems Inc.
  23  * All rights reserved.
  24  *
  25  * Redistribution and use in source or binary forms, with or without
  26  * modifications, are permitted provided that the following conditions are met:
  27  *
  28  * . Redistributions of source code must retain the above copyright notice, this
  29  *    list of conditions and the following Disclaimer as comments in the code as
  30  *    well as in the documentation and/or other materials provided with the
  31  *    distribution.
  32  *
  33  * . Redistributions in binary form must reproduce the above copyright notice,
  34  *    this list of conditions and the following Disclaimer in the documentation
  35  *    and/or other materials provided with the distribution.
  36  *
  37  * . Neither the name of Agere Systems Inc. nor the names of the contributors
  38  *    may be used to endorse or promote products derived from this software
  39  *    without specific prior written permission.
  40  *
  41  * Disclaimer
  42  *
  43  * THIS SOFTWARE IS PROVIDED \93AS IS\94 AND ANY EXPRESS OR IMPLIED WARRANTIES,
  44  * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
  45  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
  46  * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
  47  * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
  48  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  49  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  50  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  51  * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
  52  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
  53  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
  54  * DAMAGE.
  55  *
  56  */
  57
  58 #include "et131x_version.h"
  59 #include "et131x_debug.h"
  60 #include "et131x_defs.h"
  61
  62 #include <linux/pci.h>
  63 #include <linux/init.h>
  64 #include <linux/module.h>
  65 #include <linux/types.h>
  66 #include <linux/kernel.h>
  67
  68 #include <linux/sched.h>
  69 #include <linux/ptrace.h>
  70 #include <linux/slab.h>
  71 #include <linux/ctype.h>
  72 #include <linux/string.h>
  73 #include <linux/timer.h>
  74 #include <linux/interrupt.h>
  75 #include <linux/in.h>
  76 #include <linux/delay.h>
  77 #include <asm/io.h>
  78 #include <asm/system.h>
  79 #include <asm/bitops.h>
  80
  81 #include <linux/netdevice.h>
  82 #include <linux/etherdevice.h>
  83 #include <linux/skbuff.h>
  84 #include <linux/if_arp.h>
  85 #include <linux/ioport.h>
  86
  87 #include "et1310_phy.h"
  88 #include "et1310_pm.h"
  89 #include "et1310_jagcore.h"
  90
  91 #include "et131x_adapter.h"
  92 #include "et131x_initpci.h"
  93
  94 #include "et1310_rx.h"
  95
  96 /* Data for debugging facilities */
  97 #ifdef CONFIG_ET131X_DEBUG
  98 extern dbg_info_t *et131x_dbginfo;
  99 #endif /* CONFIG_ET131X_DEBUG */
 100
 101
 102 void nic_return_rfd(struct et131x_adapter *pAdapter, PMP_RFD pMpRfd);
 103
 104 /**
 105  * et131x_rx_dma_memory_alloc
 106  * @adapter: pointer to our private adapter structure
 107  *
 108  * Returns 0 on success and errno on failure (as defined in errno.h)
 109  *
 110  * Allocates Free buffer ring 1 for sure, free buffer ring 0 if required,
 111  * and the Packet Status Ring.
 112  */
 113 int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
 114 {
 115         uint32_t OuterLoop, InnerLoop;
 116         uint32_t bufsize;
 117         uint32_t pktStatRingSize, FBRChunkSize;
 118         RX_RING_t *rx_ring;
 119
 120         DBG_ENTER(et131x_dbginfo);
 121
 122         /* Setup some convenience pointers */
 123         rx_ring = (RX_RING_t *) & adapter->RxRing;
 124
 125         /* Alloc memory for the lookup table */
 126 #ifdef USE_FBR0
 127         rx_ring->Fbr[0] = kmalloc(sizeof(FBRLOOKUPTABLE), GFP_KERNEL);
 128 #endif
 129
 130         rx_ring->Fbr[1] = kmalloc(sizeof(FBRLOOKUPTABLE), GFP_KERNEL);
 131
 132         /* The first thing we will do is configure the sizes of the buffer
 133          * rings. These will change based on jumbo packet support.  Larger
 134          * jumbo packets increases the size of each entry in FBR0, and the
 135          * number of entries in FBR0, while at the same time decreasing the
 136          * number of entries in FBR1.
 137          *
 138          * FBR1 holds "large" frames, FBR0 holds "small" frames.  If FBR1
 139          * entries are huge in order to accomodate a "jumbo" frame, then it
 140          * will have less entries.  Conversely, FBR1 will now be relied upon
 141          * to carry more "normal" frames, thus it's entry size also increases
 142          * and the number of entries goes up too (since it now carries
 143          * "small" + "regular" packets.
 144          *
 145          * In this scheme, we try to maintain 512 entries between the two
 146          * rings. Also, FBR1 remains a constant size - when it's size doubles
 147          * the number of entries halves.  FBR0 increases in size, however.
 148          */
 149
 150         if (adapter->RegistryJumboPacket < 2048) {
 151 #ifdef USE_FBR0
 152                 rx_ring->Fbr0BufferSize = 256;
 153                 rx_ring->Fbr0NumEntries = 512;
 154 #endif
 155                 rx_ring->Fbr1BufferSize = 2048;
 156                 rx_ring->Fbr1NumEntries = 512;
 157         } else if (adapter->RegistryJumboPacket < 4096) {
 158 #ifdef USE_FBR0
 159                 rx_ring->Fbr0BufferSize = 512;
 160                 rx_ring->Fbr0NumEntries = 1024;
 161 #endif
 162                 rx_ring->Fbr1BufferSize = 4096;
 163                 rx_ring->Fbr1NumEntries = 512;
 164         } else {
 165 #ifdef USE_FBR0
 166                 rx_ring->Fbr0BufferSize = 1024;
 167                 rx_ring->Fbr0NumEntries = 768;
 168 #endif
 169                 rx_ring->Fbr1BufferSize = 16384;
 170                 rx_ring->Fbr1NumEntries = 128;
 171         }
 172
 173 #ifdef USE_FBR0
 174         adapter->RxRing.PsrNumEntries = adapter->RxRing.Fbr0NumEntries +
 175             adapter->RxRing.Fbr1NumEntries;
 176 #else
 177         adapter->RxRing.PsrNumEntries = adapter->RxRing.Fbr1NumEntries;
 178 #endif
 179
 180         /* Allocate an area of memory for Free Buffer Ring 1 */
 181         bufsize = (sizeof(FBR_DESC_t) * rx_ring->Fbr1NumEntries) + 0xfff;
 182         rx_ring->pFbr1RingVa = pci_alloc_consistent(adapter->pdev,
 183                                                     bufsize,
 184                                                     &rx_ring->pFbr1RingPa);
 185         if (!rx_ring->pFbr1RingVa) {
 186                 DBG_ERROR(et131x_dbginfo,
 187                           "Cannot alloc memory for Free Buffer Ring 1\n");
 188                 DBG_LEAVE(et131x_dbginfo);
 189                 return -ENOMEM;
 190         }
 191
 192         /* Save physical address
 193          *
 194          * NOTE: pci_alloc_consistent(), used above to alloc DMA regions,
 195          * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
 196          * are ever returned, make sure the high part is retrieved here
 197          * before storing the adjusted address.
 198          */
 199         rx_ring->Fbr1Realpa = rx_ring->pFbr1RingPa;
 200
 201         /* Align Free Buffer Ring 1 on a 4K boundary */
 202         et131x_align_allocated_memory(adapter,
 203                                       &rx_ring->Fbr1Realpa,
 204                                       &rx_ring->Fbr1offset, 0x0FFF);
 205
 206         rx_ring->pFbr1RingVa = (void *)((uint8_t *) rx_ring->pFbr1RingVa +
 207                                         rx_ring->Fbr1offset);
 208
 209 #ifdef USE_FBR0
 210         /* Allocate an area of memory for Free Buffer Ring 0 */
 211         bufsize = (sizeof(FBR_DESC_t) * rx_ring->Fbr0NumEntries) + 0xfff;
 212         rx_ring->pFbr0RingVa = pci_alloc_consistent(adapter->pdev,
 213                                                     bufsize,
 214                                                     &rx_ring->pFbr0RingPa);
 215         if (!rx_ring->pFbr0RingVa) {
 216                 DBG_ERROR(et131x_dbginfo,
 217                           "Cannot alloc memory for Free Buffer Ring 0\n");
 218                 DBG_LEAVE(et131x_dbginfo);
 219                 return -ENOMEM;
 220         }
 221
 222         /* Save physical address
 223          *
 224          * NOTE: pci_alloc_consistent(), used above to alloc DMA regions,
 225          * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
 226          * are ever returned, make sure the high part is retrieved here before
 227          * storing the adjusted address.
 228          */
 229         rx_ring->Fbr0Realpa = rx_ring->pFbr0RingPa;
 230
 231         /* Align Free Buffer Ring 0 on a 4K boundary */
 232         et131x_align_allocated_memory(adapter,
 233                                       &rx_ring->Fbr0Realpa,
 234                                       &rx_ring->Fbr0offset, 0x0FFF);
 235
 236         rx_ring->pFbr0RingVa = (void *)((uint8_t *) rx_ring->pFbr0RingVa +
 237                                         rx_ring->Fbr0offset);
 238 #endif
 239
 240         for (OuterLoop = 0; OuterLoop < (rx_ring->Fbr1NumEntries / FBR_CHUNKS);
 241              OuterLoop++) {
 242                 uint64_t Fbr1Offset;
 243                 uint64_t Fbr1TempPa;
 244                 uint32_t Fbr1Align;
 245
 246                 /* This code allocates an area of memory big enough for N
 247                  * free buffers + (buffer_size - 1) so that the buffers can
 248                  * be aligned on 4k boundaries.  If each buffer were aligned
 249                  * to a buffer_size boundary, the effect would be to double
 250                  * the size of FBR0.  By allocating N buffers at once, we
 251                  * reduce this overhead.
 252                  */
 253                 if (rx_ring->Fbr1BufferSize > 4096) {
 254                         Fbr1Align = 4096;
 255                 } else {
 256                         Fbr1Align = rx_ring->Fbr1BufferSize;
 257                 }
 258
 259                 FBRChunkSize =
 260                     (FBR_CHUNKS * rx_ring->Fbr1BufferSize) + Fbr1Align - 1;
 261                 rx_ring->Fbr1MemVa[OuterLoop] =
 262                     pci_alloc_consistent(adapter->pdev, FBRChunkSize,
 263                                          &rx_ring->Fbr1MemPa[OuterLoop]);
 264
 265                 if (!rx_ring->Fbr1MemVa[OuterLoop]) {
 266                         DBG_ERROR(et131x_dbginfo, "Could not alloc memory\n");
 267                         DBG_LEAVE(et131x_dbginfo);
 268                         return -ENOMEM;
 269                 }
 270
 271                 /* See NOTE in "Save Physical Address" comment above */
 272                 Fbr1TempPa = rx_ring->Fbr1MemPa[OuterLoop];
 273
 274                 et131x_align_allocated_memory(adapter,
 275                                               &Fbr1TempPa,
 276                                               &Fbr1Offset, (Fbr1Align - 1));
 277
 278                 for (InnerLoop = 0; InnerLoop < FBR_CHUNKS; InnerLoop++) {
 279                         uint32_t index = (OuterLoop * FBR_CHUNKS) + InnerLoop;
 280
 281                         /* Save the Virtual address of this index for quick
 282                          * access later
 283                          */
 284                         rx_ring->Fbr[1]->Va[index] =
 285                             (uint8_t *) rx_ring->Fbr1MemVa[OuterLoop] +
 286                             (InnerLoop * rx_ring->Fbr1BufferSize) + Fbr1Offset;
 287
 288                         /* now store the physical address in the descriptor
 289                          * so the device can access it
 290                          */
 291                         rx_ring->Fbr[1]->PAHigh[index] =
 292                             (uint32_t) (Fbr1TempPa >> 32);
 293                         rx_ring->Fbr[1]->PALow[index] = (uint32_t) Fbr1TempPa;
 294
 295                         Fbr1TempPa += rx_ring->Fbr1BufferSize;
 296
 297                         rx_ring->Fbr[1]->Buffer1[index] =
 298                             rx_ring->Fbr[1]->Va[index];
 299                         rx_ring->Fbr[1]->Buffer2[index] =
 300                             rx_ring->Fbr[1]->Va[index] - 4;
 301                 }
 302         }
 303
 304 #ifdef USE_FBR0
 305         /* Same for FBR0 (if in use) */
 306         for (OuterLoop = 0; OuterLoop < (rx_ring->Fbr0NumEntries / FBR_CHUNKS);
 307              OuterLoop++) {
 308                 uint64_t Fbr0Offset;
 309                 uint64_t Fbr0TempPa;
 310
 311                 FBRChunkSize = ((FBR_CHUNKS + 1) * rx_ring->Fbr0BufferSize) - 1;
 312                 rx_ring->Fbr0MemVa[OuterLoop] =
 313                     pci_alloc_consistent(adapter->pdev, FBRChunkSize,
 314                                          &rx_ring->Fbr0MemPa[OuterLoop]);
 315
 316                 if (!rx_ring->Fbr0MemVa[OuterLoop]) {
 317                         DBG_ERROR(et131x_dbginfo, "Could not alloc memory\n");
 318                         DBG_LEAVE(et131x_dbginfo);
 319                         return -ENOMEM;
 320                 }
 321
 322                 /* See NOTE in "Save Physical Address" comment above */
 323                 Fbr0TempPa = rx_ring->Fbr0MemPa[OuterLoop];
 324
 325                 et131x_align_allocated_memory(adapter,
 326                                               &Fbr0TempPa,
 327                                               &Fbr0Offset,
 328                                               rx_ring->Fbr0BufferSize - 1);
 329
 330                 for (InnerLoop = 0; InnerLoop < FBR_CHUNKS; InnerLoop++) {
 331                         uint32_t index = (OuterLoop * FBR_CHUNKS) + InnerLoop;
 332
 333                         rx_ring->Fbr[0]->Va[index] =
 334                             (uint8_t *) rx_ring->Fbr0MemVa[OuterLoop] +
 335                             (InnerLoop * rx_ring->Fbr0BufferSize) + Fbr0Offset;
 336
 337                         rx_ring->Fbr[0]->PAHigh[index] =
 338                             (uint32_t) (Fbr0TempPa >> 32);
 339                         rx_ring->Fbr[0]->PALow[index] = (uint32_t) Fbr0TempPa;
 340
 341                         Fbr0TempPa += rx_ring->Fbr0BufferSize;
 342
 343                         rx_ring->Fbr[0]->Buffer1[index] =
 344                             rx_ring->Fbr[0]->Va[index];
 345                         rx_ring->Fbr[0]->Buffer2[index] =
 346                             rx_ring->Fbr[0]->Va[index] - 4;
 347                 }
 348         }
 349 #endif
 350
 351         /* Allocate an area of memory for FIFO of Packet Status ring entries */
 352         pktStatRingSize =
 353             sizeof(PKT_STAT_DESC_t) * adapter->RxRing.PsrNumEntries;
 354
 355         rx_ring->pPSRingVa = pci_alloc_consistent(adapter->pdev,
 356                                                   pktStatRingSize + 0x0fff,
 357                                                   &rx_ring->pPSRingPa);
 358
 359         if (!rx_ring->pPSRingVa) {
 360                 DBG_ERROR(et131x_dbginfo,
 361                           "Cannot alloc memory for Packet Status Ring\n");
 362                 DBG_LEAVE(et131x_dbginfo);
 363                 return -ENOMEM;
 364         }
 365
 366         /* Save physical address
 367          *
 368          * NOTE : pci_alloc_consistent(), used above to alloc DMA regions,
 369          * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
 370          * are ever returned, make sure the high part is retrieved here before
 371          * storing the adjusted address.
 372          */
 373         rx_ring->pPSRingRealPa = rx_ring->pPSRingPa;
 374
 375         /* Align Packet Status Ring on a 4K boundary */
 376         et131x_align_allocated_memory(adapter,
 377                                       &rx_ring->pPSRingRealPa,
 378                                       &rx_ring->pPSRingOffset, 0x0FFF);
 379
 380         rx_ring->pPSRingVa = (void *)((uint8_t *) rx_ring->pPSRingVa +
 381                                       rx_ring->pPSRingOffset);
 382
 383         /* Allocate an area of memory for writeback of status information */
 384         rx_ring->pRxStatusVa = pci_alloc_consistent(adapter->pdev,
 385                                                     sizeof(RX_STATUS_BLOCK_t) +
 386                                                     0x7, &rx_ring->pRxStatusPa);
 387         if (!rx_ring->pRxStatusVa) {
 388                 DBG_ERROR(et131x_dbginfo,
 389                           "Cannot alloc memory for Status Block\n");
 390                 DBG_LEAVE(et131x_dbginfo);
 391                 return -ENOMEM;
 392         }
 393
 394         /* Save physical address */
 395         rx_ring->RxStatusRealPA = rx_ring->pRxStatusPa;
 396
 397         /* Align write back on an 8 byte boundary */
 398         et131x_align_allocated_memory(adapter,
 399                                       &rx_ring->RxStatusRealPA,
 400                                       &rx_ring->RxStatusOffset, 0x07);
 401
 402         rx_ring->pRxStatusVa = (void *)((uint8_t *) rx_ring->pRxStatusVa +
 403                                         rx_ring->RxStatusOffset);
 404         rx_ring->NumRfd = NIC_DEFAULT_NUM_RFD;
 405
 406         /* Recv
 407          * pci_pool_create initializes a lookaside list. After successful
 408          * creation, nonpaged fixed-size blocks can be allocated from and
 409          * freed to the lookaside list.
 410          * RFDs will be allocated from this pool.
 411          */
 412         rx_ring->RecvLookaside = kmem_cache_create(adapter->netdev->name,
 413                                                    sizeof(MP_RFD),
 414                                                    0,
 415                                                    SLAB_CACHE_DMA |
 416                                                    SLAB_HWCACHE_ALIGN,
 417                                                    NULL);
 418
 419         MP_SET_FLAG(adapter, fMP_ADAPTER_RECV_LOOKASIDE);
 420
 421         /* The RFDs are going to be put on lists later on, so initialize the
 422          * lists now.
 423          */
 424         INIT_LIST_HEAD(&rx_ring->RecvList);
 425         INIT_LIST_HEAD(&rx_ring->RecvPendingList);
 426
 427         DBG_LEAVE(et131x_dbginfo);
 428         return 0;
 429 }
 430
 431 /**
 432  * et131x_rx_dma_memory_free - Free all memory allocated within this module.
 433  * @adapter: pointer to our private adapter structure
 434  */
 435 void et131x_rx_dma_memory_free(struct et131x_adapter *adapter)
 436 {
 437         uint32_t index;
 438         uint32_t bufsize;
 439         uint32_t pktStatRingSize;
 440         PMP_RFD pMpRfd;
 441         RX_RING_t *rx_ring;
 442
 443         DBG_ENTER(et131x_dbginfo);
 444
 445         /* Setup some convenience pointers */
 446         rx_ring = (RX_RING_t *) & adapter->RxRing;
 447
 448         /* Free RFDs and associated packet descriptors */
 449         DBG_ASSERT(rx_ring->nReadyRecv == rx_ring->NumRfd);
 450
 451         while (!list_empty(&rx_ring->RecvList)) {
 452                 pMpRfd = (MP_RFD *) list_entry(rx_ring->RecvList.next,
 453                                                MP_RFD, list_node);
 454
 455                 list_del(&pMpRfd->list_node);
 456                 et131x_rfd_resources_free(adapter, pMpRfd);
 457         }
 458
 459         while (!list_empty(&rx_ring->RecvPendingList)) {
 460                 pMpRfd = (MP_RFD *) list_entry(rx_ring->RecvPendingList.next,
 461                                                MP_RFD, list_node);
 462                 list_del(&pMpRfd->list_node);
 463                 et131x_rfd_resources_free(adapter, pMpRfd);
 464         }
 465
 466         /* Free Free Buffer Ring 1 */
 467         if (rx_ring->pFbr1RingVa) {
 468                 /* First the packet memory */
 469                 for (index = 0; index <
 470                      (rx_ring->Fbr1NumEntries / FBR_CHUNKS); index++) {
 471                         if (rx_ring->Fbr1MemVa[index]) {
 472                                 uint32_t Fbr1Align;
 473
 474                                 if (rx_ring->Fbr1BufferSize > 4096) {
 475                                         Fbr1Align = 4096;
 476                                 } else {
 477                                         Fbr1Align = rx_ring->Fbr1BufferSize;
 478                                 }
 479
 480                                 bufsize =
 481                                     (rx_ring->Fbr1BufferSize * FBR_CHUNKS) +
 482                                     Fbr1Align - 1;
 483
 484                                 pci_free_consistent(adapter->pdev,
 485                                                     bufsize,
 486                                                     rx_ring->Fbr1MemVa[index],
 487                                                     rx_ring->Fbr1MemPa[index]);
 488
 489                                 rx_ring->Fbr1MemVa[index] = NULL;
 490                         }
 491                 }
 492
 493                 /* Now the FIFO itself */
 494                 rx_ring->pFbr1RingVa = (void *)((uint8_t *) rx_ring->pFbr1RingVa -
 495                                                 rx_ring->Fbr1offset);
 496
 497                 bufsize =
 498                     (sizeof(FBR_DESC_t) * rx_ring->Fbr1NumEntries) + 0xfff;
 499
 500                 pci_free_consistent(adapter->pdev,
 501                                     bufsize,
 502                                     rx_ring->pFbr1RingVa, rx_ring->pFbr1RingPa);
 503
 504                 rx_ring->pFbr1RingVa = NULL;
 505         }
 506
 507 #ifdef USE_FBR0
 508         /* Now the same for Free Buffer Ring 0 */
 509         if (rx_ring->pFbr0RingVa) {
 510                 /* First the packet memory */
 511                 for (index = 0; index <
 512                      (rx_ring->Fbr0NumEntries / FBR_CHUNKS); index++) {
 513                         if (rx_ring->Fbr0MemVa[index]) {
 514                                 bufsize =
 515                                     (rx_ring->Fbr0BufferSize *
 516                                      (FBR_CHUNKS + 1)) - 1;
 517
 518                                 pci_free_consistent(adapter->pdev,
 519                                                     bufsize,
 520                                                     rx_ring->Fbr0MemVa[index],
 521                                                     rx_ring->Fbr0MemPa[index]);
 522
 523                                 rx_ring->Fbr0MemVa[index] = NULL;
 524                         }
 525                 }
 526
 527                 /* Now the FIFO itself */
 528                 rx_ring->pFbr0RingVa = (void *)((uint8_t *) rx_ring->pFbr0RingVa -
 529                                                 rx_ring->Fbr0offset);
 530
 531                 bufsize =
 532                     (sizeof(FBR_DESC_t) * rx_ring->Fbr0NumEntries) + 0xfff;
 533
 534                 pci_free_consistent(adapter->pdev,
 535                                     bufsize,
 536                                     rx_ring->pFbr0RingVa, rx_ring->pFbr0RingPa);
 537
 538                 rx_ring->pFbr0RingVa = NULL;
 539         }
 540 #endif
 541
 542         /* Free Packet Status Ring */
 543         if (rx_ring->pPSRingVa) {
 544                 rx_ring->pPSRingVa = (void *)((uint8_t *) rx_ring->pPSRingVa -
 545                                               rx_ring->pPSRingOffset);
 546
 547                 pktStatRingSize =
 548                     sizeof(PKT_STAT_DESC_t) * adapter->RxRing.PsrNumEntries;
 549
 550                 pci_free_consistent(adapter->pdev,
 551                                     pktStatRingSize + 0x0fff,
 552                                     rx_ring->pPSRingVa, rx_ring->pPSRingPa);
 553
 554                 rx_ring->pPSRingVa = NULL;
 555         }
 556
 557         /* Free area of memory for the writeback of status information */
 558         if (rx_ring->pRxStatusVa) {
 559                 rx_ring->pRxStatusVa = (void *)((uint8_t *) rx_ring->pRxStatusVa -
 560                                                 rx_ring->RxStatusOffset);
 561
 562                 pci_free_consistent(adapter->pdev,
 563                                     sizeof(RX_STATUS_BLOCK_t) + 0x7,
 564                                     rx_ring->pRxStatusVa, rx_ring->pRxStatusPa);
 565
 566                 rx_ring->pRxStatusVa = NULL;
 567         }
 568
 569         /* Free receive buffer pool */
 570
 571         /* Free receive packet pool */
 572
 573         /* Destroy the lookaside (RFD) pool */
 574         if (MP_TEST_FLAG(adapter, fMP_ADAPTER_RECV_LOOKASIDE)) {
 575                 kmem_cache_destroy(rx_ring->RecvLookaside);
 576                 MP_CLEAR_FLAG(adapter, fMP_ADAPTER_RECV_LOOKASIDE);
 577         }
 578
 579         /* Free the FBR Lookup Table */
 580 #ifdef USE_FBR0
 581         kfree(rx_ring->Fbr[0]);
 582 #endif
 583
 584         kfree(rx_ring->Fbr[1]);
 585
 586         /* Reset Counters */
 587         rx_ring->nReadyRecv = 0;
 588
 589         DBG_LEAVE(et131x_dbginfo);
 590 }
 591
 592 /**
 593  * et131x_init_recv - Initialize receive data structures.
 594  * @adapter: pointer to our private adapter structure
 595  *
 596  * Returns 0 on success and errno on failure (as defined in errno.h)
 597  */
 598 int et131x_init_recv(struct et131x_adapter *adapter)
 599 {
 600         int status = -ENOMEM;
 601         PMP_RFD pMpRfd = NULL;
 602         uint32_t RfdCount;
 603         uint32_t TotalNumRfd = 0;
 604         RX_RING_t *rx_ring = NULL;
 605
 606         DBG_ENTER(et131x_dbginfo);
 607
 608         /* Setup some convenience pointers */
 609         rx_ring = (RX_RING_t *) & adapter->RxRing;
 610
 611         /* Setup each RFD */
 612         for (RfdCount = 0; RfdCount < rx_ring->NumRfd; RfdCount++) {
 613                 pMpRfd = (MP_RFD *) kmem_cache_alloc(rx_ring->RecvLookaside,
 614                                                      GFP_ATOMIC | GFP_DMA);
 615
 616                 if (!pMpRfd) {
 617                         DBG_ERROR(et131x_dbginfo,
 618                                   "Couldn't alloc RFD out of kmem_cache\n");
 619                         status = -ENOMEM;
 620                         continue;
 621                 }
 622
 623                 status = et131x_rfd_resources_alloc(adapter, pMpRfd);
 624                 if (status != 0) {
 625                         DBG_ERROR(et131x_dbginfo,
 626                                   "Couldn't alloc packet for RFD\n");
 627                         kmem_cache_free(rx_ring->RecvLookaside, pMpRfd);
 628                         continue;
 629                 }
 630
 631                 /* Add this RFD to the RecvList */
 632                 list_add_tail(&pMpRfd->list_node, &rx_ring->RecvList);
 633
 634                 /* Increment both the available RFD's, and the total RFD's. */
 635                 rx_ring->nReadyRecv++;
 636                 TotalNumRfd++;
 637         }
 638
 639         if (TotalNumRfd > NIC_MIN_NUM_RFD) {
 640                 status = 0;
 641         }
 642
 643         rx_ring->NumRfd = TotalNumRfd;
 644
 645         if (status != 0) {
 646                 kmem_cache_free(rx_ring->RecvLookaside, pMpRfd);
 647                 DBG_ERROR(et131x_dbginfo,
 648                           "Allocation problems in et131x_init_recv\n");
 649         }
 650
 651         DBG_LEAVE(et131x_dbginfo);
 652         return status;
 653 }
 654
 655 /**
 656  * et131x_rfd_resources_alloc
 657  * @adapter: pointer to our private adapter structure
 658  * @pMpRfd: pointer to a RFD
 659  *
 660  * Returns 0 on success and errno on failure (as defined in errno.h)
 661  */
 662 int et131x_rfd_resources_alloc(struct et131x_adapter *adapter, MP_RFD *pMpRfd)
 663 {
 664         pMpRfd->Packet = NULL;
 665
 666         return 0;
 667 }
 668
 669 /**
 670  * et131x_rfd_resources_free - Free the packet allocated for the given RFD
 671  * @adapter: pointer to our private adapter structure
 672  * @pMpRfd: pointer to a RFD
 673  */
 674 void et131x_rfd_resources_free(struct et131x_adapter *adapter, MP_RFD *pMpRfd)
 675 {
 676         pMpRfd->Packet = NULL;
 677         kmem_cache_free(adapter->RxRing.RecvLookaside, pMpRfd);
 678 }
 679
 680 /**
 681  * ConfigRxDmaRegs - Start of Rx_DMA init sequence
 682  * @pAdapter: pointer to our adapter structure
 683  */
 684 void ConfigRxDmaRegs(struct et131x_adapter *pAdapter)
 685 {
 686         struct _RXDMA_t __iomem *pRxDma = &pAdapter->CSRAddress->rxdma;
 687         struct _rx_ring_t *pRxLocal = &pAdapter->RxRing;
 688         PFBR_DESC_t pFbrEntry;
 689         uint32_t iEntry;
 690         RXDMA_PSR_NUM_DES_t psr_num_des;
 691         unsigned long lockflags;
 692
 693         DBG_ENTER(et131x_dbginfo);
 694
 695         /* Halt RXDMA to perform the reconfigure.  */
 696         et131x_rx_dma_disable(pAdapter);
 697
 698         /* Load the completion writeback physical address
 699          *
 700          * NOTE : pci_alloc_consistent(), used above to alloc DMA regions,
 701          * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
 702          * are ever returned, make sure the high part is retrieved here
 703          * before storing the adjusted address.
 704          */
 705         writel((uint32_t) (pRxLocal->RxStatusRealPA >> 32),
 706                &pRxDma->dma_wb_base_hi);
 707         writel((uint32_t) pRxLocal->RxStatusRealPA, &pRxDma->dma_wb_base_lo);
 708
 709         memset(pRxLocal->pRxStatusVa, 0, sizeof(RX_STATUS_BLOCK_t));
 710
 711         /* Set the address and parameters of the packet status ring into the
 712          * 1310's registers
 713          */
 714         writel((uint32_t) (pRxLocal->pPSRingRealPa >> 32),
 715                &pRxDma->psr_base_hi);
 716         writel((uint32_t) pRxLocal->pPSRingRealPa, &pRxDma->psr_base_lo);
 717         writel(pRxLocal->PsrNumEntries - 1, &pRxDma->psr_num_des.value);
 718         writel(0, &pRxDma->psr_full_offset.value);
 719
 720         psr_num_des.value = readl(&pRxDma->psr_num_des.value);
 721         writel((psr_num_des.bits.psr_ndes * LO_MARK_PERCENT_FOR_PSR) / 100,
 722                &pRxDma->psr_min_des.value);
 723
 724         spin_lock_irqsave(&pAdapter->RcvLock, lockflags);
 725
 726         /* These local variables track the PSR in the adapter structure */
 727         pRxLocal->local_psr_full.bits.psr_full = 0;
 728         pRxLocal->local_psr_full.bits.psr_full_wrap = 0;
 729
 730         /* Now's the best time to initialize FBR1 contents */
 731         pFbrEntry = (PFBR_DESC_t) pRxLocal->pFbr1RingVa;
 732         for (iEntry = 0; iEntry < pRxLocal->Fbr1NumEntries; iEntry++) {
 733                 pFbrEntry->addr_hi = pRxLocal->Fbr[1]->PAHigh[iEntry];
 734                 pFbrEntry->addr_lo = pRxLocal->Fbr[1]->PALow[iEntry];
 735                 pFbrEntry->word2.bits.bi = iEntry;
 736                 pFbrEntry++;
 737         }
 738
 739         /* Set the address and parameters of Free buffer ring 1 (and 0 if
 740          * required) into the 1310's registers
 741          */
 742         writel((uint32_t) (pRxLocal->Fbr1Realpa >> 32), &pRxDma->fbr1_base_hi);
 743         writel((uint32_t) pRxLocal->Fbr1Realpa, &pRxDma->fbr1_base_lo);
 744         writel(pRxLocal->Fbr1NumEntries - 1, &pRxDma->fbr1_num_des.value);
 745
 746         {
 747                 DMA10W_t fbr1_full = { 0 };
 748
 749                 fbr1_full.bits.val = 0;
 750                 fbr1_full.bits.wrap = 1;
 751                 writel(fbr1_full.value, &pRxDma->fbr1_full_offset.value);
 752         }
 753
 754         /* This variable tracks the free buffer ring 1 full position, so it
 755          * has to match the above.
 756          */
 757         pRxLocal->local_Fbr1_full.bits.val = 0;
 758         pRxLocal->local_Fbr1_full.bits.wrap = 1;
 759         writel(((pRxLocal->Fbr1NumEntries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
 760                &pRxDma->fbr1_min_des.value);
 761
 762 #ifdef USE_FBR0
 763         /* Now's the best time to initialize FBR0 contents */
 764         pFbrEntry = (PFBR_DESC_t) pRxLocal->pFbr0RingVa;
 765         for (iEntry = 0; iEntry < pRxLocal->Fbr0NumEntries; iEntry++) {
 766                 pFbrEntry->addr_hi = pRxLocal->Fbr[0]->PAHigh[iEntry];
 767                 pFbrEntry->addr_lo = pRxLocal->Fbr[0]->PALow[iEntry];
 768                 pFbrEntry->word2.bits.bi = iEntry;
 769                 pFbrEntry++;
 770         }
 771
 772         writel((uint32_t) (pRxLocal->Fbr0Realpa >> 32), &pRxDma->fbr0_base_hi);
 773         writel((uint32_t) pRxLocal->Fbr0Realpa, &pRxDma->fbr0_base_lo);
 774         writel(pRxLocal->Fbr0NumEntries - 1, &pRxDma->fbr0_num_des.value);
 775
 776         {
 777                 DMA10W_t fbr0_full = { 0 };
 778
 779                 fbr0_full.bits.val = 0;
 780                 fbr0_full.bits.wrap = 1;
 781                 writel(fbr0_full.value, &pRxDma->fbr0_full_offset.value);
 782         }
 783
 784         /* This variable tracks the free buffer ring 0 full position, so it
 785          * has to match the above.
 786          */
 787         pRxLocal->local_Fbr0_full.bits.val = 0;
 788         pRxLocal->local_Fbr0_full.bits.wrap = 1;
 789         writel(((pRxLocal->Fbr0NumEntries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
 790                &pRxDma->fbr0_min_des.value);
 791 #endif
 792
 793         /* Program the number of packets we will receive before generating an
 794          * interrupt.
 795          * For version B silicon, this value gets updated once autoneg is
 796          *complete.
 797          */
 798         writel(pAdapter->RegistryRxNumBuffers, &pRxDma->num_pkt_done.value);
 799
 800         /* The "time_done" is not working correctly to coalesce interrupts
 801          * after a given time period, but rather is giving us an interrupt
 802          * regardless of whether we have received packets.
 803          * This value gets updated once autoneg is complete.
 804          */
 805         writel(pAdapter->RegistryRxTimeInterval, &pRxDma->max_pkt_time.value);
 806
 807         spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags);
 808
 809         DBG_LEAVE(et131x_dbginfo);
 810 }
 811
 812 /**
 813  * SetRxDmaTimer - Set the heartbeat timer according to line rate.
 814  * @pAdapter: pointer to our adapter structure
 815  */
 816 void SetRxDmaTimer(struct et131x_adapter *pAdapter)
 817 {
 818         /* For version B silicon, we do not use the RxDMA timer for 10 and 100
 819          * Mbits/s line rates. We do not enable and RxDMA interrupt coalescing.
 820          */
 821         if ((pAdapter->uiLinkSpeed == TRUEPHY_SPEED_100MBPS) ||
 822             (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_10MBPS)) {
 823                 writel(0, &pAdapter->CSRAddress->rxdma.max_pkt_time.value);
 824                 writel(1, &pAdapter->CSRAddress->rxdma.num_pkt_done.value);
 825         }
 826 }
 827
 828 /**
 829  * et131x_rx_dma_disable - Stop of Rx_DMA on the ET1310
 830  * @pAdapter: pointer to our adapter structure
 831  */
 832 void et131x_rx_dma_disable(struct et131x_adapter *pAdapter)
 833 {
 834         RXDMA_CSR_t csr;
 835
 836         DBG_ENTER(et131x_dbginfo);
 837
 838         /* Setup the receive dma configuration register */
 839         writel(0x00002001, &pAdapter->CSRAddress->rxdma.csr.value);
 840         csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value);
 841         if (csr.bits.halt_status != 1) {
 842                 udelay(5);
 843                 csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value);
 844                 if (csr.bits.halt_status != 1) {
 845                         DBG_ERROR(et131x_dbginfo,
 846                                   "RX Dma failed to enter halt state. CSR 0x%08x\n",
 847                                   csr.value);
 848                 }
 849         }
 850
 851         DBG_LEAVE(et131x_dbginfo);
 852 }
 853
 854 /**
 855  * et131x_rx_dma_enable - re-start of Rx_DMA on the ET1310.
 856  * @pAdapter: pointer to our adapter structure
 857  */
 858 void et131x_rx_dma_enable(struct et131x_adapter *pAdapter)
 859 {
 860         DBG_RX_ENTER(et131x_dbginfo);
 861
 862         if (pAdapter->RegistryPhyLoopbk) {
 863         /* RxDMA is disabled for loopback operation. */
 864                 writel(0x1, &pAdapter->CSRAddress->rxdma.csr.value);
 865         } else {
 866         /* Setup the receive dma configuration register for normal operation */
 867                 RXDMA_CSR_t csr = { 0 };
 868
 869                 csr.bits.fbr1_enable = 1;
 870                 if (pAdapter->RxRing.Fbr1BufferSize == 4096) {
 871                         csr.bits.fbr1_size = 1;
 872                 } else if (pAdapter->RxRing.Fbr1BufferSize == 8192) {
 873                         csr.bits.fbr1_size = 2;
 874                 } else if (pAdapter->RxRing.Fbr1BufferSize == 16384) {
 875                         csr.bits.fbr1_size = 3;
 876                 }
 877 #ifdef USE_FBR0
 878                 csr.bits.fbr0_enable = 1;
 879                 if (pAdapter->RxRing.Fbr0BufferSize == 256) {
 880                         csr.bits.fbr0_size = 1;
 881                 } else if (pAdapter->RxRing.Fbr0BufferSize == 512) {
 882                         csr.bits.fbr0_size = 2;
 883                 } else if (pAdapter->RxRing.Fbr0BufferSize == 1024) {
 884                         csr.bits.fbr0_size = 3;
 885                 }
 886 #endif
 887                 writel(csr.value, &pAdapter->CSRAddress->rxdma.csr.value);
 888
 889                 csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value);
 890                 if (csr.bits.halt_status != 0) {
 891                         udelay(5);
 892                         csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value);
 893                         if (csr.bits.halt_status != 0) {
 894                                 DBG_ERROR(et131x_dbginfo,
 895                                           "RX Dma failed to exit halt state.  CSR 0x%08x\n",
 896                                           csr.value);
 897                         }
 898                 }
 899         }
 900
 901         DBG_RX_LEAVE(et131x_dbginfo);
 902 }
 903
 904 /**
 905  * nic_rx_pkts - Checks the hardware for available packets
 906  * @pAdapter: pointer to our adapter
 907  *
 908  * Returns pMpRfd, a pointer to our MPRFD.
 909  *
 910  * Checks the hardware for available packets, using completion ring
 911  * If packets are available, it gets an RFD from the RecvList, attaches
 912  * the packet to it, puts the RFD in the RecvPendList, and also returns
 913  * the pointer to the RFD.
 914  */
 915 PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter)
 916 {
 917         struct _rx_ring_t *pRxLocal = &pAdapter->RxRing;
 918         PRX_STATUS_BLOCK_t pRxStatusBlock;
 919         PPKT_STAT_DESC_t pPSREntry;
 920         PMP_RFD pMpRfd;
 921         uint32_t nIndex;
 922         uint8_t *pBufVa;
 923         unsigned long lockflags;
 924         struct list_head *element;
 925         uint8_t ringIndex;
 926         uint16_t bufferIndex;
 927         uint32_t localLen;
 928         PKT_STAT_DESC_WORD0_t Word0;
 929
 930
 931         DBG_RX_ENTER(et131x_dbginfo);
 932
 933         /* RX Status block is written by the DMA engine prior to every
 934          * interrupt. It contains the next to be used entry in the Packet
 935          * Status Ring, and also the two Free Buffer rings.
 936          */
 937         pRxStatusBlock = (PRX_STATUS_BLOCK_t) pRxLocal->pRxStatusVa;
 938
 939         if (pRxStatusBlock->Word1.bits.PSRoffset ==
 940                         pRxLocal->local_psr_full.bits.psr_full &&
 941             pRxStatusBlock->Word1.bits.PSRwrap ==
 942                         pRxLocal->local_psr_full.bits.psr_full_wrap) {
 943                 /* Looks like this ring is not updated yet */
 944                 DBG_RX(et131x_dbginfo, "(0)\n");
 945                 DBG_RX_LEAVE(et131x_dbginfo);
 946                 return NULL;
 947         }
 948
 949         /* The packet status ring indicates that data is available. */
 950         pPSREntry = (PPKT_STAT_DESC_t) (pRxLocal->pPSRingVa) +
 951                         pRxLocal->local_psr_full.bits.psr_full;
 952
 953         /* Grab any information that is required once the PSR is
 954          * advanced, since we can no longer rely on the memory being
 955          * accurate
 956          */
 957         localLen = pPSREntry->word1.bits.length;
 958         ringIndex = (uint8_t) pPSREntry->word1.bits.ri;
 959         bufferIndex = (uint16_t) pPSREntry->word1.bits.bi;
 960         Word0 = pPSREntry->word0;
 961
 962         DBG_RX(et131x_dbginfo, "RX PACKET STATUS\n");
 963         DBG_RX(et131x_dbginfo, "\tlength      : %d\n", localLen);
 964         DBG_RX(et131x_dbginfo, "\tringIndex   : %d\n", ringIndex);
 965         DBG_RX(et131x_dbginfo, "\tbufferIndex : %d\n", bufferIndex);
 966         DBG_RX(et131x_dbginfo, "\tword0       : 0x%08x\n", Word0.value);
 967
 968 #if 0
 969         /* Check the Status Word that the MAC has appended to the PSR
 970          * entry in case the MAC has detected errors.
 971          */
 972         if (Word0.value & ALCATEL_BAD_STATUS) {
 973                 DBG_ERROR(et131x_dbginfo,
 974                           "NICRxPkts >> Alcatel Status Word error."
 975                           "Value 0x%08x\n", pPSREntry->word0.value);
 976         }
 977 #endif
 978
 979         /* Indicate that we have used this PSR entry. */
 980         if (++pRxLocal->local_psr_full.bits.psr_full >
 981             pRxLocal->PsrNumEntries - 1) {
 982                 pRxLocal->local_psr_full.bits.psr_full = 0;
 983                 pRxLocal->local_psr_full.bits.psr_full_wrap ^= 1;
 984         }
 985
 986         writel(pRxLocal->local_psr_full.value,
 987                &pAdapter->CSRAddress->rxdma.psr_full_offset.value);
 988
 989 #ifndef USE_FBR0
 990         if (ringIndex != 1) {
 991                 DBG_ERROR(et131x_dbginfo,
 992                           "NICRxPkts PSR Entry %d indicates "
 993                           "Buffer Ring 0 in use\n",
 994                           pRxLocal->local_psr_full.bits.psr_full);
 995                 DBG_RX_LEAVE(et131x_dbginfo);
 996                 return NULL;
 997         }
 998 #endif
 999
1000 #ifdef USE_FBR0
1001         if (ringIndex > 1 ||
1002             (ringIndex == 0 &&
1003              bufferIndex > pRxLocal->Fbr0NumEntries - 1) ||
1004             (ringIndex == 1 &&
1005              bufferIndex > pRxLocal->Fbr1NumEntries - 1))
1006 #else
1007         if (ringIndex != 1 ||
1008             bufferIndex > pRxLocal->Fbr1NumEntries - 1)
1009 #endif
1010         {
1011                 /* Illegal buffer or ring index cannot be used by S/W*/
1012                 DBG_ERROR(et131x_dbginfo,
1013                           "NICRxPkts PSR Entry %d indicates "
1014                           "length of %d and/or bad bi(%d)\n",
1015                           pRxLocal->local_psr_full.bits.psr_full,
1016                           localLen, bufferIndex);
1017                 DBG_RX_LEAVE(et131x_dbginfo);
1018                 return NULL;
1019         }
1020
1021         /* Get and fill the RFD. */
1022         spin_lock_irqsave(&pAdapter->RcvLock, lockflags);
1023
1024         pMpRfd = NULL;
1025         element = pRxLocal->RecvList.next;
1026         pMpRfd = (PMP_RFD) list_entry(element, MP_RFD, list_node);
1027
1028         if (pMpRfd == NULL) {
1029                 DBG_RX(et131x_dbginfo,
1030                        "NULL RFD returned from RecvList via list_entry()\n");
1031                 DBG_RX_LEAVE(et131x_dbginfo);
1032                 spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags);
1033                 return NULL;
1034         }
1035
1036         list_del(&pMpRfd->list_node);
1037         pRxLocal->nReadyRecv--;
1038
1039         spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags);
1040
1041         pMpRfd->iBufferIndex = bufferIndex;
1042         pMpRfd->iRingIndex = ringIndex;
1043
1044         /* In V1 silicon, there is a bug which screws up filtering of
1045          * runt packets.  Therefore runt packet filtering is disabled
1046          * in the MAC and the packets are dropped here.  They are
1047          * also counted here.
1048          */
1049         if (localLen < (NIC_MIN_PACKET_SIZE + 4)) {
1050                 pAdapter->Stats.other_errors++;
1051                 localLen = 0;
1052         }
1053
1054         if (localLen) {
1055                 if (pAdapter->ReplicaPhyLoopbk == 1) {
1056                         pBufVa = pRxLocal->Fbr[ringIndex]->Va[bufferIndex];
1057
1058                         if (memcmp(&pBufVa[6], &pAdapter->CurrentAddress[0],
1059                                    ETH_ALEN) == 0) {
1060                                 if (memcmp(&pBufVa[42], "Replica packet",
1061                                            ETH_HLEN)) {
1062                                         pAdapter->ReplicaPhyLoopbkPF = 1;
1063                                 }
1064                         }
1065                         DBG_WARNING(et131x_dbginfo,
1066                                     "pBufVa:\t%02x:%02x:%02x:%02x:%02x:%02x\n",
1067                                     pBufVa[6], pBufVa[7], pBufVa[8],
1068                                     pBufVa[9], pBufVa[10], pBufVa[11]);
1069
1070                         DBG_WARNING(et131x_dbginfo,
1071                                     "CurrentAddr:\t%02x:%02x:%02x:%02x:%02x:%02x\n",
1072                                     pAdapter->CurrentAddress[0],
1073                                     pAdapter->CurrentAddress[1],
1074                                     pAdapter->CurrentAddress[2],
1075                                     pAdapter->CurrentAddress[3],
1076                                     pAdapter->CurrentAddress[4],
1077                                     pAdapter->CurrentAddress[5]);
1078                 }
1079
1080                 /* Determine if this is a multicast packet coming in */
1081                 if ((Word0.value & ALCATEL_MULTICAST_PKT) &&
1082                     !(Word0.value & ALCATEL_BROADCAST_PKT)) {
1083                         /* Promiscuous mode and Multicast mode are
1084                          * not mutually exclusive as was first
1085                          * thought.  I guess Promiscuous is just
1086                          * considered a super-set of the other
1087                          * filters. Generally filter is 0x2b when in
1088                          * promiscuous mode.
1089                          */
1090                         if ((pAdapter->PacketFilter & ET131X_PACKET_TYPE_MULTICAST)
1091                             && !(pAdapter->PacketFilter & ET131X_PACKET_TYPE_PROMISCUOUS)
1092                             && !(pAdapter->PacketFilter & ET131X_PACKET_TYPE_ALL_MULTICAST)) {
1093                                 pBufVa = pRxLocal->Fbr[ringIndex]->
1094                                                 Va[bufferIndex];
1095
1096                                 /* Loop through our list to see if the
1097                                  * destination address of this packet
1098                                  * matches one in our list.
1099                                  */
1100                                 for (nIndex = 0;
1101                                      nIndex < pAdapter->MCAddressCount;
1102                                      nIndex++) {
1103                                         if (pBufVa[0] ==
1104                                             pAdapter->MCList[nIndex][0]
1105                                             && pBufVa[1] ==
1106                                             pAdapter->MCList[nIndex][1]
1107                                             && pBufVa[2] ==
1108                                             pAdapter->MCList[nIndex][2]
1109                                             && pBufVa[3] ==
1110                                             pAdapter->MCList[nIndex][3]
1111                                             && pBufVa[4] ==
1112                                             pAdapter->MCList[nIndex][4]
1113                                             && pBufVa[5] ==
1114                                             pAdapter->MCList[nIndex][5]) {
1115                                                 break;
1116                                         }
1117                                 }
1118
1119                                 /* If our index is equal to the number
1120                                  * of Multicast address we have, then
1121                                  * this means we did not find this
1122                                  * packet's matching address in our
1123                                  * list.  Set the PacketSize to zero,
1124                                  * so we free our RFD when we return
1125                                  * from this function.
1126                                  */
1127                                 if (nIndex == pAdapter->MCAddressCount) {
1128                                         localLen = 0;
1129                                 }
1130                         }
1131
1132                         if (localLen > 0) {
1133                                 pAdapter->Stats.multircv++;
1134                         }
1135                 } else if (Word0.value & ALCATEL_BROADCAST_PKT) {
1136                         pAdapter->Stats.brdcstrcv++;
1137                 } else {
1138                         /* Not sure what this counter measures in
1139                          * promiscuous mode. Perhaps we should check
1140                          * the MAC address to see if it is directed
1141                          * to us in promiscuous mode.
1142                          */
1143                         pAdapter->Stats.unircv++;
1144                 }
1145         }
1146
1147         if (localLen > 0) {
1148                 struct sk_buff *skb = NULL;
1149
1150                 //pMpRfd->PacketSize = localLen - 4;
1151                 pMpRfd->PacketSize = localLen;
1152
1153                 skb = dev_alloc_skb(pMpRfd->PacketSize + 2);
1154                 if (!skb) {
1155                         DBG_ERROR(et131x_dbginfo,
1156                                   "Couldn't alloc an SKB for Rx\n");
1157                         DBG_RX_LEAVE(et131x_dbginfo);
1158                         return NULL;
1159                 }
1160
1161                 pAdapter->net_stats.rx_bytes += pMpRfd->PacketSize;
1162
1163                 memcpy(skb_put(skb, pMpRfd->PacketSize),
1164                        pRxLocal->Fbr[ringIndex]->Va[bufferIndex],
1165                        pMpRfd->PacketSize);
1166
1167                 skb->dev = pAdapter->netdev;
1168                 skb->protocol = eth_type_trans(skb, pAdapter->netdev);
1169                 skb->ip_summed = CHECKSUM_NONE;
1170
1171                 netif_rx(skb);
1172         } else {
1173                 pMpRfd->PacketSize = 0;
1174         }
1175
1176         nic_return_rfd(pAdapter, pMpRfd);
1177
1178         DBG_RX(et131x_dbginfo, "(1)\n");
1179         DBG_RX_LEAVE(et131x_dbginfo);
1180         return pMpRfd;
1181 }
1182
1183 /**
1184  * et131x_reset_recv - Reset the receive list
1185  * @pAdapter: pointer to our adapter
1186  *
1187  * Assumption, Rcv spinlock has been acquired.
1188  */
1189 void et131x_reset_recv(struct et131x_adapter *pAdapter)
1190 {
1191         PMP_RFD pMpRfd;
1192         struct list_head *element;
1193
1194         DBG_ENTER(et131x_dbginfo);
1195
1196         DBG_ASSERT(!list_empty(&pAdapter->RxRing.RecvList));
1197
1198         /* Take all the RFD's from the pending list, and stick them on the
1199          * RecvList.
1200          */
1201         while (!list_empty(&pAdapter->RxRing.RecvPendingList)) {
1202                 element = pAdapter->RxRing.RecvPendingList.next;
1203
1204                 pMpRfd = (PMP_RFD) list_entry(element, MP_RFD, list_node);
1205
1206                 list_move_tail(&pMpRfd->list_node, &pAdapter->RxRing.RecvList);
1207         }
1208
1209         DBG_LEAVE(et131x_dbginfo);
1210 }
1211
1212 /**
1213  * et131x_handle_recv_interrupt - Interrupt handler for receive processing
1214  * @pAdapter: pointer to our adapter
1215  *
1216  * Assumption, Rcv spinlock has been acquired.
1217  */
1218 void et131x_handle_recv_interrupt(struct et131x_adapter *pAdapter)
1219 {
1220         PMP_RFD pMpRfd = NULL;
1221         struct sk_buff *PacketArray[NUM_PACKETS_HANDLED];
1222         PMP_RFD RFDFreeArray[NUM_PACKETS_HANDLED];
1223         uint32_t PacketArrayCount = 0;
1224         uint32_t PacketsToHandle;
1225         uint32_t PacketFreeCount = 0;
1226         bool TempUnfinishedRec = false;
1227
1228         DBG_RX_ENTER(et131x_dbginfo);
1229
1230         PacketsToHandle = NUM_PACKETS_HANDLED;
1231
1232         /* Process up to available RFD's */
1233         while (PacketArrayCount < PacketsToHandle) {
1234                 if (list_empty(&pAdapter->RxRing.RecvList)) {
1235                         DBG_ASSERT(pAdapter->RxRing.nReadyRecv == 0);
1236                         DBG_ERROR(et131x_dbginfo, "NO RFD's !!!!!!!!!!!!!\n");
1237                         TempUnfinishedRec = true;
1238                         break;
1239                 }
1240
1241                 pMpRfd = nic_rx_pkts(pAdapter);
1242
1243                 if (pMpRfd == NULL) {
1244                         break;
1245                 }
1246
1247                 /* Do not receive any packets until a filter has been set.
1248                  * Do not receive any packets until we are at D0.
1249                  * Do not receive any packets until we have link.
1250                  * If length is zero, return the RFD in order to advance the
1251                  * Free buffer ring.
1252                  */
1253                 if ((!pAdapter->PacketFilter) ||
1254                     (pAdapter->PoMgmt.PowerState != NdisDeviceStateD0) ||
1255                     (!MP_LINK_DETECTED(pAdapter)) ||
1256                     (pMpRfd->PacketSize == 0)) {
1257                         continue;
1258                 }
1259
1260                 /* Increment the number of packets we received */
1261                 pAdapter->Stats.ipackets++;
1262
1263                 /* Set the status on the packet, either resources or success */
1264                 if (pAdapter->RxRing.nReadyRecv >= RFD_LOW_WATER_MARK) {
1265                         /* Put this RFD on the pending list
1266                          *
1267                          * NOTE: nic_rx_pkts() above is already returning the
1268                          * RFD to the RecvList, so don't additionally do that
1269                          * here.
1270                          * Besides, we don't really need (at this point) the
1271                          * pending list anyway.
1272                          */
1273                         //spin_lock_irqsave( &pAdapter->RcvPendLock, lockflags );
1274                         //list_add_tail( &pMpRfd->list_node, &pAdapter->RxRing.RecvPendingList );
1275                         //spin_unlock_irqrestore( &pAdapter->RcvPendLock, lockflags );
1276
1277                         /* Update the number of outstanding Recvs */
1278                         //MP_INC_RCV_REF( pAdapter );
1279                 } else {
1280                         RFDFreeArray[PacketFreeCount] = pMpRfd;
1281                         PacketFreeCount++;
1282
1283                         DBG_WARNING(et131x_dbginfo,
1284                                     "RFD's are running out !!!!!!!!!!!!!\n");
1285                 }
1286
1287                 PacketArray[PacketArrayCount] = pMpRfd->Packet;
1288                 PacketArrayCount++;
1289         }
1290
1291         if ((PacketArrayCount == NUM_PACKETS_HANDLED) || TempUnfinishedRec) {
1292                 pAdapter->RxRing.UnfinishedReceives = true;
1293                 writel(pAdapter->RegistryTxTimeInterval * NANO_IN_A_MICRO,
1294                        &pAdapter->CSRAddress->global.watchdog_timer);
1295         } else {
1296                 /* Watchdog timer will disable itself if appropriate. */
1297                 pAdapter->RxRing.UnfinishedReceives = false;
1298         }
1299
1300         DBG_RX_LEAVE(et131x_dbginfo);
1301 }
1302
1303 /**
1304  * NICReturnRFD - Recycle a RFD and put it back onto the receive list
1305  * @pAdapter: pointer to our adapter
1306  * @pMpRfd: pointer to the RFD
1307  */
1308 void nic_return_rfd(struct et131x_adapter *pAdapter, PMP_RFD pMpRfd)
1309 {
1310         struct _rx_ring_t *pRxLocal = &pAdapter->RxRing;
1311         struct _RXDMA_t __iomem *pRxDma = &pAdapter->CSRAddress->rxdma;
1312         uint16_t bi = pMpRfd->iBufferIndex;
1313         uint8_t ri = pMpRfd->iRingIndex;
1314         unsigned long lockflags;
1315
1316         DBG_RX_ENTER(et131x_dbginfo);
1317
1318         /* We don't use any of the OOB data besides status. Otherwise, we
1319          * need to clean up OOB data
1320          */
1321         if (
1322 #ifdef USE_FBR0
1323             (ri == 0 && bi < pRxLocal->Fbr0NumEntries) ||
1324 #endif
1325             (ri == 1 && bi < pRxLocal->Fbr1NumEntries)) {
1326                 spin_lock_irqsave(&pAdapter->FbrLock, lockflags);
1327
1328                 if (ri == 1) {
1329                         PFBR_DESC_t pNextDesc =
1330                             (PFBR_DESC_t) (pRxLocal->pFbr1RingVa) +
1331                             pRxLocal->local_Fbr1_full.bits.val;
1332
1333                         /* Handle the Free Buffer Ring advancement here. Write
1334                          * the PA / Buffer Index for the returned buffer into
1335                          * the oldest (next to be freed)FBR entry
1336                          */
1337                         pNextDesc->addr_hi = pRxLocal->Fbr[1]->PAHigh[bi];
1338                         pNextDesc->addr_lo = pRxLocal->Fbr[1]->PALow[bi];
1339                         pNextDesc->word2.value = bi;
1340
1341                         if (++pRxLocal->local_Fbr1_full.bits.val >
1342                             (pRxLocal->Fbr1NumEntries - 1)) {
1343                                 pRxLocal->local_Fbr1_full.bits.val = 0;
1344                                 pRxLocal->local_Fbr1_full.bits.wrap ^= 1;
1345                         }
1346
1347                         writel(pRxLocal->local_Fbr1_full.value,
1348                                &pRxDma->fbr1_full_offset.value);
1349                 }
1350 #ifdef USE_FBR0
1351                 else {
1352                         PFBR_DESC_t pNextDesc =
1353                             (PFBR_DESC_t) pRxLocal->pFbr0RingVa +
1354                             pRxLocal->local_Fbr0_full.bits.val;
1355
1356                         /* Handle the Free Buffer Ring advancement here. Write
1357                          * the PA / Buffer Index for the returned buffer into
1358                          * the oldest (next to be freed) FBR entry
1359                          */
1360                         pNextDesc->addr_hi = pRxLocal->Fbr[0]->PAHigh[bi];
1361                         pNextDesc->addr_lo = pRxLocal->Fbr[0]->PALow[bi];
1362                         pNextDesc->word2.value = bi;
1363
1364                         if (++pRxLocal->local_Fbr0_full.bits.val >
1365                             (pRxLocal->Fbr0NumEntries - 1)) {
1366                                 pRxLocal->local_Fbr0_full.bits.val = 0;
1367                                 pRxLocal->local_Fbr0_full.bits.wrap ^= 1;
1368                         }
1369
1370                         writel(pRxLocal->local_Fbr0_full.value,
1371                                &pRxDma->fbr0_full_offset.value);
1372                 }
1373 #endif
1374                 spin_unlock_irqrestore(&pAdapter->FbrLock, lockflags);
1375         } else {
1376                 DBG_ERROR(et131x_dbginfo,
1377                           "NICReturnRFD illegal Buffer Index returned\n");
1378         }
1379
1380         /* The processing on this RFD is done, so put it back on the tail of
1381          * our list
1382          */
1383         spin_lock_irqsave(&pAdapter->RcvLock, lockflags);
1384         list_add_tail(&pMpRfd->list_node, &pRxLocal->RecvList);
1385         pRxLocal->nReadyRecv++;
1386         spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags);
1387
1388         DBG_ASSERT(pRxLocal->nReadyRecv <= pRxLocal->NumRfd);
1389         DBG_RX_LEAVE(et131x_dbginfo);
1390 }