git.oblomov.eu Git - linux-2.6/blob - drivers/usb/net/zaurus.c

   1 /*
   2  * Copyright (C) 2002 Pavel Machek <pavel@ucw.cz>
   3  * Copyright (C) 2002-2005 by David Brownell
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation; either version 2 of the License, or
   8  * (at your option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software
  17  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  18  */
  19
  20 // #define      DEBUG                   // error path messages, extra info
  21 // #define      VERBOSE                 // more; success messages
  22
  23 #include <linux/config.h>
  24 #include <linux/module.h>
  25 #include <linux/sched.h>
  26 #include <linux/init.h>
  27 #include <linux/netdevice.h>
  28 #include <linux/ethtool.h>
  29 #include <linux/workqueue.h>
  30 #include <linux/mii.h>
  31 #include <linux/crc32.h>
  32 #include <linux/usb.h>
  33 #include <linux/usb_cdc.h>
  34
  35 #include "usbnet.h"
  36
  37
  38 /*
  39  * All known Zaurii lie about their standards conformance.  At least
  40  * the earliest SA-1100 models lie by saying they support CDC Ethernet.
  41  * Some later models (especially PXA-25x and PXA-27x based ones) lie
  42  * and say they support CDC MDLM (for access to cell phone modems).
  43  *
  44  * There are non-Zaurus products that use these same protocols too.
  45  *
  46  * The annoying thing is that at the same time Sharp was developing
  47  * that annoying standards-breaking software, the Linux community had
  48  * a simple "CDC Subset" working reliably on the same SA-1100 hardware.
  49  * That is, the same functionality but not violating standards.
  50  *
  51  * The CDC Ethernet nonconformance points are troublesome to hosts
  52  * with a true CDC Ethernet implementation:
  53  *   - Framing appends a CRC, which the spec says drivers "must not" do;
  54  *   - Transfers data in altsetting zero, instead of altsetting 1;
  55  *   - All these peripherals use the same ethernet address.
  56  *
  57  * The CDC MDLM nonconformance is less immediately troublesome, since all
  58  * MDLM implementations are quasi-proprietary anyway.
  59  */
  60
  61 static struct sk_buff *
  62 zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
  63 {
  64         int                     padlen;
  65         struct sk_buff          *skb2;
  66
  67         padlen = 2;
  68         if (!skb_cloned(skb)) {
  69                 int     tailroom = skb_tailroom(skb);
  70                 if ((padlen + 4) <= tailroom)
  71                         goto done;
  72         }
  73         skb2 = skb_copy_expand(skb, 0, 4 + padlen, flags);
  74         dev_kfree_skb_any(skb);
  75         skb = skb2;
  76         if (skb) {
  77                 u32             fcs;
  78 done:
  79                 fcs = crc32_le(~0, skb->data, skb->len);
  80                 fcs = ~fcs;
  81
  82                 *skb_put (skb, 1) = fcs       & 0xff;
  83                 *skb_put (skb, 1) = (fcs>> 8) & 0xff;
  84                 *skb_put (skb, 1) = (fcs>>16) & 0xff;
  85                 *skb_put (skb, 1) = (fcs>>24) & 0xff;
  86         }
  87         return skb;
  88 }
  89
  90 static int zaurus_bind(struct usbnet *dev, struct usb_interface *intf)
  91 {
  92         /* Belcarra's funky framing has other options; mostly
  93          * TRAILERS (!) with 4 bytes CRC, and maybe 2 pad bytes.
  94          */
  95         dev->net->hard_header_len += 6;
  96         dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
  97         return usbnet_generic_cdc_bind(dev, intf);
  98 }
  99
 100 /* PDA style devices are always connected if present */
 101 static int always_connected (struct usbnet *dev)
 102 {
 103         return 0;
 104 }
 105
 106 static const struct driver_info zaurus_sl5x00_info = {
 107         .description =  "Sharp Zaurus SL-5x00",
 108         .flags =        FLAG_FRAMING_Z,
 109         .check_connect = always_connected,
 110         .bind =         zaurus_bind,
 111         .unbind =       usbnet_cdc_unbind,
 112         .tx_fixup =     zaurus_tx_fixup,
 113 };
 114 #define ZAURUS_STRONGARM_INFO   ((unsigned long)&zaurus_sl5x00_info)
 115
 116 static const struct driver_info zaurus_pxa_info = {
 117         .description =  "Sharp Zaurus, PXA-2xx based",
 118         .flags =        FLAG_FRAMING_Z,
 119         .check_connect = always_connected,
 120         .bind =         zaurus_bind,
 121         .unbind =       usbnet_cdc_unbind,
 122         .tx_fixup =     zaurus_tx_fixup,
 123 };
 124 #define ZAURUS_PXA_INFO         ((unsigned long)&zaurus_pxa_info)
 125
 126 static const struct driver_info olympus_mxl_info = {
 127         .description =  "Olympus R1000",
 128         .flags =        FLAG_FRAMING_Z,
 129         .check_connect = always_connected,
 130         .bind =         zaurus_bind,
 131         .unbind =       usbnet_cdc_unbind,
 132         .tx_fixup =     zaurus_tx_fixup,
 133 };
 134 #define OLYMPUS_MXL_INFO        ((unsigned long)&olympus_mxl_info)
 135
 136
 137 /* Some more recent products using Lineo/Belcarra code will wrongly claim
 138  * CDC MDLM conformance.  They aren't conformant:  data endpoints live
 139  * in the control interface, there's no data interface, and it's not used
 140  * to talk to a cell phone radio.  But at least we can detect these two
 141  * pseudo-classes, rather than growing this product list with entries for
 142  * each new nonconformant product (sigh).
 143  */
 144 static const u8 safe_guid[16] = {
 145         0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
 146         0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
 147 };
 148 static const u8 blan_guid[16] = {
 149         0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70,
 150         0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37,
 151 };
 152
 153 static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf)
 154 {
 155         u8                              *buf = intf->cur_altsetting->extra;
 156         int                             len = intf->cur_altsetting->extralen;
 157         struct usb_cdc_mdlm_desc        *desc = NULL;
 158         struct usb_cdc_mdlm_detail_desc *detail = NULL;
 159
 160         while (len > 3) {
 161                 if (buf [1] != USB_DT_CS_INTERFACE)
 162                         goto next_desc;
 163
 164                 /* use bDescriptorSubType, and just verify that we get a
 165                  * "BLAN" (or "SAFE") descriptor.
 166                  */
 167                 switch (buf [2]) {
 168                 case USB_CDC_MDLM_TYPE:
 169                         if (desc) {
 170                                 dev_dbg(&intf->dev, "extra MDLM\n");
 171                                 goto bad_desc;
 172                         }
 173                         desc = (void *) buf;
 174                         if (desc->bLength != sizeof *desc) {
 175                                 dev_dbg(&intf->dev, "MDLM len %u\n",
 176                                         desc->bLength);
 177                                 goto bad_desc;
 178                         }
 179                         /* expect bcdVersion 1.0, ignore */
 180                         if (memcmp(&desc->bGUID, blan_guid, 16)
 181                                     && memcmp(&desc->bGUID, safe_guid, 16) ) {
 182                                 /* hey, this one might _really_ be MDLM! */
 183                                 dev_dbg(&intf->dev, "MDLM guid\n");
 184                                 goto bad_desc;
 185                         }
 186                         break;
 187                 case USB_CDC_MDLM_DETAIL_TYPE:
 188                         if (detail) {
 189                                 dev_dbg(&intf->dev, "extra MDLM detail\n");
 190                                 goto bad_desc;
 191                         }
 192                         detail = (void *) buf;
 193                         switch (detail->bGuidDescriptorType) {
 194                         case 0:                 /* "SAFE" */
 195                                 if (detail->bLength != (sizeof *detail + 2))
 196                                         goto bad_detail;
 197                                 break;
 198                         case 1:                 /* "BLAN" */
 199                                 if (detail->bLength != (sizeof *detail + 3))
 200                                         goto bad_detail;
 201                                 break;
 202                         default:
 203                                 goto bad_detail;
 204                         }
 205
 206                         /* assuming we either noticed BLAN already, or will
 207                          * find it soon, there are some data bytes here:
 208                          *  - bmNetworkCapabilities (unused)
 209                          *  - bmDataCapabilities (bits, see below)
 210                          *  - bPad (ignored, for PADAFTER -- BLAN-only)
 211                          * bits are:
 212                          *  - 0x01 -- Zaurus framing (add CRC)
 213                          *  - 0x02 -- PADBEFORE (CRC includes some padding)
 214                          *  - 0x04 -- PADAFTER (some padding after CRC)
 215                          *  - 0x08 -- "fermat" packet mangling (for hw bugs)
 216                          * the PADBEFORE appears not to matter; we interop
 217                          * with devices that use it and those that don't.
 218                          */
 219                         if ((detail->bDetailData[1] & ~0x02) != 0x01) {
 220                                 /* bmDataCapabilites == 0 would be fine too,
 221                                  * but framing is minidriver-coupled for now.
 222                                  */
 223 bad_detail:
 224                                 dev_dbg(&intf->dev,
 225                                                 "bad MDLM detail, %d %d %d\n",
 226                                                 detail->bLength,
 227                                                 detail->bDetailData[0],
 228                                                 detail->bDetailData[2]);
 229                                 goto bad_desc;
 230                         }
 231                         break;
 232                 }
 233 next_desc:
 234                 len -= buf [0]; /* bLength */
 235                 buf += buf [0];
 236         }
 237
 238         if (!desc || !detail) {
 239                 dev_dbg(&intf->dev, "missing cdc mdlm %s%sdescriptor\n",
 240                         desc ? "" : "func ",
 241                         detail ? "" : "detail ");
 242                 goto bad_desc;
 243         }
 244
 245         /* There's probably a CDC Ethernet descriptor there, but we can't
 246          * rely on the Ethernet address it provides since not all vendors
 247          * bother to make it unique.  Likewise there's no point in tracking
 248          * of the CDC event notifications.
 249          */
 250         return usbnet_get_endpoints(dev, intf);
 251
 252 bad_desc:
 253         dev_info(&dev->udev->dev, "unsupported MDLM descriptors\n");
 254         return -ENODEV;
 255 }
 256
 257 static const struct driver_info bogus_mdlm_info = {
 258         .description =  "pseudo-MDLM (BLAN) device",
 259         .flags =        FLAG_FRAMING_Z,
 260         .check_connect = always_connected,
 261         .tx_fixup =     zaurus_tx_fixup,
 262         .bind =         blan_mdlm_bind,
 263 };
 264
 265 static const struct usb_device_id       products [] = {
 266 #define ZAURUS_MASTER_INTERFACE \
 267         .bInterfaceClass        = USB_CLASS_COMM, \
 268         .bInterfaceSubClass     = USB_CDC_SUBCLASS_ETHERNET, \
 269         .bInterfaceProtocol     = USB_CDC_PROTO_NONE
 270
 271 /* SA-1100 based Sharp Zaurus ("collie"), or compatible. */
 272 {
 273         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 274                           | USB_DEVICE_ID_MATCH_DEVICE,
 275         .idVendor               = 0x04DD,
 276         .idProduct              = 0x8004,
 277         ZAURUS_MASTER_INTERFACE,
 278         .driver_info = ZAURUS_STRONGARM_INFO,
 279 },
 280
 281 /* PXA-2xx based models are also lying-about-cdc.  If you add any
 282  * more devices that claim to be CDC Ethernet, make sure they get
 283  * added to the blacklist in cdc_ether too.
 284  *
 285  * NOTE:  OpenZaurus versions with 2.6 kernels won't use these entries,
 286  * unlike the older ones with 2.4 "embedix" kernels.
 287  */
 288 {
 289         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 290                           | USB_DEVICE_ID_MATCH_DEVICE,
 291         .idVendor               = 0x04DD,
 292         .idProduct              = 0x8005,       /* A-300 */
 293         ZAURUS_MASTER_INTERFACE,
 294         .driver_info = ZAURUS_PXA_INFO,
 295 }, {
 296         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 297                           | USB_DEVICE_ID_MATCH_DEVICE,
 298         .idVendor               = 0x04DD,
 299         .idProduct              = 0x8006,       /* B-500/SL-5600 */
 300         ZAURUS_MASTER_INTERFACE,
 301         .driver_info = ZAURUS_PXA_INFO,
 302 }, {
 303         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 304                   | USB_DEVICE_ID_MATCH_DEVICE,
 305         .idVendor               = 0x04DD,
 306         .idProduct              = 0x8007,       /* C-700 */
 307         ZAURUS_MASTER_INTERFACE,
 308         .driver_info = ZAURUS_PXA_INFO,
 309 }, {
 310         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 311                  | USB_DEVICE_ID_MATCH_DEVICE,
 312         .idVendor               = 0x04DD,
 313         .idProduct              = 0x9031,       /* C-750 C-760 */
 314         ZAURUS_MASTER_INTERFACE,
 315         .driver_info = ZAURUS_PXA_INFO,
 316 }, {
 317         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 318                  | USB_DEVICE_ID_MATCH_DEVICE,
 319         .idVendor               = 0x04DD,
 320         .idProduct              = 0x9032,       /* SL-6000 */
 321         ZAURUS_MASTER_INTERFACE,
 322         .driver_info = ZAURUS_PXA_INFO,
 323 }, {
 324         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 325                  | USB_DEVICE_ID_MATCH_DEVICE,
 326         .idVendor               = 0x04DD,
 327         /* reported with some C860 units */
 328         .idProduct              = 0x9050,       /* C-860 */
 329         ZAURUS_MASTER_INTERFACE,
 330         .driver_info = ZAURUS_PXA_INFO,
 331 },
 332
 333
 334 /* At least some of the newest PXA units have very different lies about
 335  * their standards support:  they claim to be cell phones offering
 336  * direct access to their radios!  (No, they don't conform to CDC MDLM.)
 337  */
 338 {
 339         USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
 340                         USB_CDC_PROTO_NONE),
 341         .driver_info = (unsigned long) &bogus_mdlm_info,
 342 },
 343
 344 /* Olympus has some models with a Zaurus-compatible option.
 345  * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
 346  */
 347 {
 348         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 349                  | USB_DEVICE_ID_MATCH_DEVICE,
 350         .idVendor               = 0x07B4,
 351         .idProduct              = 0x0F02,       /* R-1000 */
 352         ZAURUS_MASTER_INTERFACE,
 353         .driver_info = OLYMPUS_MXL_INFO,
 354 },
 355         { },            // END
 356 };
 357 MODULE_DEVICE_TABLE(usb, products);
 358
 359 static struct usb_driver zaurus_driver = {
 360         .name =         "zaurus",
 361         .id_table =     products,
 362         .probe =        usbnet_probe,
 363         .disconnect =   usbnet_disconnect,
 364         .suspend =      usbnet_suspend,
 365         .resume =       usbnet_resume,
 366 };
 367
 368 static int __init zaurus_init(void)
 369 {
 370         return usb_register(&zaurus_driver);
 371 }
 372 module_init(zaurus_init);
 373
 374 static void __exit zaurus_exit(void)
 375 {
 376         usb_deregister(&zaurus_driver);
 377 }
 378 module_exit(zaurus_exit);
 379
 380 MODULE_AUTHOR("Pavel Machek, David Brownell");
 381 MODULE_DESCRIPTION("Sharp Zaurus PDA, and compatible products");
 382 MODULE_LICENSE("GPL");