git.oblomov.eu Git - linux-2.6/blob - drivers/net/sb1250-mac.c

   1 /*
   2  * Copyright (C) 2001,2002,2003 Broadcom Corporation
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License
   6  * as published by the Free Software Foundation; either version 2
   7  * of the License, or (at your option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software
  16  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  17  *
  18  *
  19  * This driver is designed for the Broadcom SiByte SOC built-in
  20  * Ethernet controllers. Written by Mitch Lichtenberg at Broadcom Corp.
  21  */
  22 #include <linux/module.h>
  23 #include <linux/kernel.h>
  24 #include <linux/string.h>
  25 #include <linux/timer.h>
  26 #include <linux/errno.h>
  27 #include <linux/ioport.h>
  28 #include <linux/slab.h>
  29 #include <linux/interrupt.h>
  30 #include <linux/netdevice.h>
  31 #include <linux/etherdevice.h>
  32 #include <linux/skbuff.h>
  33 #include <linux/init.h>
  34 #include <linux/config.h>
  35 #include <linux/bitops.h>
  36 #include <asm/processor.h>              /* Processor type for cache alignment. */
  37 #include <asm/io.h>
  38 #include <asm/cache.h>
  39
  40 /* This is only here until the firmware is ready.  In that case,
  41    the firmware leaves the ethernet address in the register for us. */
  42 #ifdef CONFIG_SIBYTE_STANDALONE
  43 #define SBMAC_ETH0_HWADDR "40:00:00:00:01:00"
  44 #define SBMAC_ETH1_HWADDR "40:00:00:00:01:01"
  45 #define SBMAC_ETH2_HWADDR "40:00:00:00:01:02"
  46 #endif
  47
  48
  49 /* These identify the driver base version and may not be removed. */
  50 #if 0
  51 static char version1[] __devinitdata =
  52 "sb1250-mac.c:1.00 1/11/2001 Written by Mitch Lichtenberg\n";
  53 #endif
  54
  55
  56 /* Operational parameters that usually are not changed. */
  57
  58 #define CONFIG_SBMAC_COALESCE
  59
  60 #define MAX_UNITS 3             /* More are supported, limit only on options */
  61
  62 /* Time in jiffies before concluding the transmitter is hung. */
  63 #define TX_TIMEOUT  (2*HZ)
  64
  65
  66 MODULE_AUTHOR("Mitch Lichtenberg (Broadcom Corp.)");
  67 MODULE_DESCRIPTION("Broadcom SiByte SOC GB Ethernet driver");
  68
  69 /* A few user-configurable values which may be modified when a driver
  70    module is loaded. */
  71
  72 /* 1 normal messages, 0 quiet .. 7 verbose. */
  73 static int debug = 1;
  74 module_param(debug, int, S_IRUGO);
  75 MODULE_PARM_DESC(debug, "Debug messages");
  76
  77 /* mii status msgs */
  78 static int noisy_mii = 1;
  79 module_param(noisy_mii, int, S_IRUGO);
  80 MODULE_PARM_DESC(noisy_mii, "MII status messages");
  81
  82 /* Used to pass the media type, etc.
  83    Both 'options[]' and 'full_duplex[]' should exist for driver
  84    interoperability.
  85    The media type is usually passed in 'options[]'.
  86 */
  87 #ifdef MODULE
  88 static int options[MAX_UNITS] = {-1, -1, -1};
  89 module_param_array(options, int, NULL, S_IRUGO);
  90 MODULE_PARM_DESC(options, "1-" __MODULE_STRING(MAX_UNITS));
  91
  92 static int full_duplex[MAX_UNITS] = {-1, -1, -1};
  93 module_param_array(full_duplex, int, NULL, S_IRUGO);
  94 MODULE_PARM_DESC(full_duplex, "1-" __MODULE_STRING(MAX_UNITS));
  95 #endif
  96
  97 #ifdef CONFIG_SBMAC_COALESCE
  98 static int int_pktcnt = 0;
  99 module_param(int_pktcnt, int, S_IRUGO);
 100 MODULE_PARM_DESC(int_pktcnt, "Packet count");
 101
 102 static int int_timeout = 0;
 103 module_param(int_timeout, int, S_IRUGO);
 104 MODULE_PARM_DESC(int_timeout, "Timeout value");
 105 #endif
 106
 107 #include <asm/sibyte/sb1250.h>
 108 #include <asm/sibyte/sb1250_defs.h>
 109 #include <asm/sibyte/sb1250_regs.h>
 110 #include <asm/sibyte/sb1250_mac.h>
 111 #include <asm/sibyte/sb1250_dma.h>
 112 #include <asm/sibyte/sb1250_int.h>
 113 #include <asm/sibyte/sb1250_scd.h>
 114
 115
 116 /**********************************************************************
 117  *  Simple types
 118  ********************************************************************* */
 119
 120
 121 typedef unsigned long sbmac_port_t;
 122
 123 typedef enum { sbmac_speed_auto, sbmac_speed_10,
 124                sbmac_speed_100, sbmac_speed_1000 } sbmac_speed_t;
 125
 126 typedef enum { sbmac_duplex_auto, sbmac_duplex_half,
 127                sbmac_duplex_full } sbmac_duplex_t;
 128
 129 typedef enum { sbmac_fc_auto, sbmac_fc_disabled, sbmac_fc_frame,
 130                sbmac_fc_collision, sbmac_fc_carrier } sbmac_fc_t;
 131
 132 typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on,
 133                sbmac_state_broken } sbmac_state_t;
 134
 135
 136 /**********************************************************************
 137  *  Macros
 138  ********************************************************************* */
 139
 140
 141 #define SBDMA_NEXTBUF(d,f) ((((d)->f+1) == (d)->sbdma_dscrtable_end) ? \
 142                           (d)->sbdma_dscrtable : (d)->f+1)
 143
 144
 145 #define NUMCACHEBLKS(x) (((x)+SMP_CACHE_BYTES-1)/SMP_CACHE_BYTES)
 146
 147 #define SBMAC_READCSR(t)        __raw_readq((unsigned long)t)
 148 #define SBMAC_WRITECSR(t,v)     __raw_writeq(v, (unsigned long)t)
 149
 150
 151 #define SBMAC_MAX_TXDESCR       32
 152 #define SBMAC_MAX_RXDESCR       32
 153
 154 #define ETHER_ALIGN     2
 155 #define ETHER_ADDR_LEN  6
 156 #define ENET_PACKET_SIZE        1518
 157 /*#define ENET_PACKET_SIZE      9216 */
 158
 159 /**********************************************************************
 160  *  DMA Descriptor structure
 161  ********************************************************************* */
 162
 163 typedef struct sbdmadscr_s {
 164         uint64_t  dscr_a;
 165         uint64_t  dscr_b;
 166 } sbdmadscr_t;
 167
 168 typedef unsigned long paddr_t;
 169
 170 /**********************************************************************
 171  *  DMA Controller structure
 172  ********************************************************************* */
 173
 174 typedef struct sbmacdma_s {
 175
 176         /*
 177          * This stuff is used to identify the channel and the registers
 178          * associated with it.
 179          */
 180
 181         struct sbmac_softc *sbdma_eth;          /* back pointer to associated MAC */
 182         int              sbdma_channel; /* channel number */
 183         int              sbdma_txdir;       /* direction (1=transmit) */
 184         int              sbdma_maxdescr;        /* total # of descriptors in ring */
 185 #ifdef CONFIG_SBMAC_COALESCE
 186         int              sbdma_int_pktcnt;  /* # descriptors rx/tx before interrupt*/
 187         int              sbdma_int_timeout; /* # usec rx/tx interrupt */
 188 #endif
 189
 190         sbmac_port_t     sbdma_config0; /* DMA config register 0 */
 191         sbmac_port_t     sbdma_config1; /* DMA config register 1 */
 192         sbmac_port_t     sbdma_dscrbase;        /* Descriptor base address */
 193         sbmac_port_t     sbdma_dscrcnt;     /* Descriptor count register */
 194         sbmac_port_t     sbdma_curdscr; /* current descriptor address */
 195
 196         /*
 197          * This stuff is for maintenance of the ring
 198          */
 199
 200         sbdmadscr_t     *sbdma_dscrtable;       /* base of descriptor table */
 201         sbdmadscr_t     *sbdma_dscrtable_end; /* end of descriptor table */
 202
 203         struct sk_buff **sbdma_ctxtable;    /* context table, one per descr */
 204
 205         paddr_t          sbdma_dscrtable_phys; /* and also the phys addr */
 206         sbdmadscr_t     *sbdma_addptr;  /* next dscr for sw to add */
 207         sbdmadscr_t     *sbdma_remptr;  /* next dscr for sw to remove */
 208 } sbmacdma_t;
 209
 210
 211 /**********************************************************************
 212  *  Ethernet softc structure
 213  ********************************************************************* */
 214
 215 struct sbmac_softc {
 216
 217         /*
 218          * Linux-specific things
 219          */
 220
 221         struct net_device *sbm_dev;             /* pointer to linux device */
 222         spinlock_t sbm_lock;            /* spin lock */
 223         struct timer_list sbm_timer;            /* for monitoring MII */
 224         struct net_device_stats sbm_stats;
 225         int sbm_devflags;                       /* current device flags */
 226
 227         int          sbm_phy_oldbmsr;
 228         int          sbm_phy_oldanlpar;
 229         int          sbm_phy_oldk1stsr;
 230         int          sbm_phy_oldlinkstat;
 231         int sbm_buffersize;
 232
 233         unsigned char sbm_phys[2];
 234
 235         /*
 236          * Controller-specific things
 237          */
 238
 239         unsigned long   sbm_base;          /* MAC's base address */
 240         sbmac_state_t    sbm_state;         /* current state */
 241
 242         sbmac_port_t     sbm_macenable; /* MAC Enable Register */
 243         sbmac_port_t     sbm_maccfg;    /* MAC Configuration Register */
 244         sbmac_port_t     sbm_fifocfg;   /* FIFO configuration register */
 245         sbmac_port_t     sbm_framecfg;  /* Frame configuration register */
 246         sbmac_port_t     sbm_rxfilter;  /* receive filter register */
 247         sbmac_port_t     sbm_isr;               /* Interrupt status register */
 248         sbmac_port_t     sbm_imr;               /* Interrupt mask register */
 249         sbmac_port_t     sbm_mdio;              /* MDIO register */
 250
 251         sbmac_speed_t    sbm_speed;             /* current speed */
 252         sbmac_duplex_t   sbm_duplex;    /* current duplex */
 253         sbmac_fc_t       sbm_fc;                /* current flow control setting */
 254
 255         unsigned char    sbm_hwaddr[ETHER_ADDR_LEN];
 256
 257         sbmacdma_t       sbm_txdma;             /* for now, only use channel 0 */
 258         sbmacdma_t       sbm_rxdma;
 259         int              rx_hw_checksum;
 260         int              sbe_idx;
 261 };
 262
 263
 264 /**********************************************************************
 265  *  Externs
 266  ********************************************************************* */
 267
 268 /**********************************************************************
 269  *  Prototypes
 270  ********************************************************************* */
 271
 272 static void sbdma_initctx(sbmacdma_t *d,
 273                           struct sbmac_softc *s,
 274                           int chan,
 275                           int txrx,
 276                           int maxdescr);
 277 static void sbdma_channel_start(sbmacdma_t *d, int rxtx);
 278 static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *m);
 279 static int sbdma_add_txbuffer(sbmacdma_t *d,struct sk_buff *m);
 280 static void sbdma_emptyring(sbmacdma_t *d);
 281 static void sbdma_fillring(sbmacdma_t *d);
 282 static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d);
 283 static void sbdma_tx_process(struct sbmac_softc *sc,sbmacdma_t *d);
 284 static int sbmac_initctx(struct sbmac_softc *s);
 285 static void sbmac_channel_start(struct sbmac_softc *s);
 286 static void sbmac_channel_stop(struct sbmac_softc *s);
 287 static sbmac_state_t sbmac_set_channel_state(struct sbmac_softc *,sbmac_state_t);
 288 static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff);
 289 static uint64_t sbmac_addr2reg(unsigned char *ptr);
 290 static irqreturn_t sbmac_intr(int irq,void *dev_instance,struct pt_regs *rgs);
 291 static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev);
 292 static void sbmac_setmulti(struct sbmac_softc *sc);
 293 static int sbmac_init(struct net_device *dev, int idx);
 294 static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed);
 295 static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc_t fc);
 296
 297 static int sbmac_open(struct net_device *dev);
 298 static void sbmac_timer(unsigned long data);
 299 static void sbmac_tx_timeout (struct net_device *dev);
 300 static struct net_device_stats *sbmac_get_stats(struct net_device *dev);
 301 static void sbmac_set_rx_mode(struct net_device *dev);
 302 static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 303 static int sbmac_close(struct net_device *dev);
 304 static int sbmac_mii_poll(struct sbmac_softc *s,int noisy);
 305
 306 static void sbmac_mii_sync(struct sbmac_softc *s);
 307 static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitcnt);
 308 static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx);
 309 static void sbmac_mii_write(struct sbmac_softc *s,int phyaddr,int regidx,
 310                             unsigned int regval);
 311
 312
 313 /**********************************************************************
 314  *  Globals
 315  ********************************************************************* */
 316
 317 static uint64_t sbmac_orig_hwaddr[MAX_UNITS];
 318
 319
 320 /**********************************************************************
 321  *  MDIO constants
 322  ********************************************************************* */
 323
 324 #define MII_COMMAND_START       0x01
 325 #define MII_COMMAND_READ        0x02
 326 #define MII_COMMAND_WRITE       0x01
 327 #define MII_COMMAND_ACK         0x02
 328
 329 #define BMCR_RESET     0x8000
 330 #define BMCR_LOOPBACK  0x4000
 331 #define BMCR_SPEED0    0x2000
 332 #define BMCR_ANENABLE  0x1000
 333 #define BMCR_POWERDOWN 0x0800
 334 #define BMCR_ISOLATE   0x0400
 335 #define BMCR_RESTARTAN 0x0200
 336 #define BMCR_DUPLEX    0x0100
 337 #define BMCR_COLTEST   0x0080
 338 #define BMCR_SPEED1    0x0040
 339 #define BMCR_SPEED1000  BMCR_SPEED1
 340 #define BMCR_SPEED100   BMCR_SPEED0
 341 #define BMCR_SPEED10    0
 342
 343 #define BMSR_100BT4     0x8000
 344 #define BMSR_100BT_FDX  0x4000
 345 #define BMSR_100BT_HDX  0x2000
 346 #define BMSR_10BT_FDX   0x1000
 347 #define BMSR_10BT_HDX   0x0800
 348 #define BMSR_100BT2_FDX 0x0400
 349 #define BMSR_100BT2_HDX 0x0200
 350 #define BMSR_1000BT_XSR 0x0100
 351 #define BMSR_PRESUP     0x0040
 352 #define BMSR_ANCOMPLT   0x0020
 353 #define BMSR_REMFAULT   0x0010
 354 #define BMSR_AUTONEG    0x0008
 355 #define BMSR_LINKSTAT   0x0004
 356 #define BMSR_JABDETECT  0x0002
 357 #define BMSR_EXTCAPAB   0x0001
 358
 359 #define PHYIDR1         0x2000
 360 #define PHYIDR2         0x5C60
 361
 362 #define ANAR_NP         0x8000
 363 #define ANAR_RF         0x2000
 364 #define ANAR_ASYPAUSE   0x0800
 365 #define ANAR_PAUSE      0x0400
 366 #define ANAR_T4         0x0200
 367 #define ANAR_TXFD       0x0100
 368 #define ANAR_TXHD       0x0080
 369 #define ANAR_10FD       0x0040
 370 #define ANAR_10HD       0x0020
 371 #define ANAR_PSB        0x0001
 372
 373 #define ANLPAR_NP       0x8000
 374 #define ANLPAR_ACK      0x4000
 375 #define ANLPAR_RF       0x2000
 376 #define ANLPAR_ASYPAUSE 0x0800
 377 #define ANLPAR_PAUSE    0x0400
 378 #define ANLPAR_T4       0x0200
 379 #define ANLPAR_TXFD     0x0100
 380 #define ANLPAR_TXHD     0x0080
 381 #define ANLPAR_10FD     0x0040
 382 #define ANLPAR_10HD     0x0020
 383 #define ANLPAR_PSB      0x0001  /* 802.3 */
 384
 385 #define ANER_PDF        0x0010
 386 #define ANER_LPNPABLE   0x0008
 387 #define ANER_NPABLE     0x0004
 388 #define ANER_PAGERX     0x0002
 389 #define ANER_LPANABLE   0x0001
 390
 391 #define ANNPTR_NP       0x8000
 392 #define ANNPTR_MP       0x2000
 393 #define ANNPTR_ACK2     0x1000
 394 #define ANNPTR_TOGTX    0x0800
 395 #define ANNPTR_CODE     0x0008
 396
 397 #define ANNPRR_NP       0x8000
 398 #define ANNPRR_MP       0x2000
 399 #define ANNPRR_ACK3     0x1000
 400 #define ANNPRR_TOGTX    0x0800
 401 #define ANNPRR_CODE     0x0008
 402
 403 #define K1TCR_TESTMODE  0x0000
 404 #define K1TCR_MSMCE     0x1000
 405 #define K1TCR_MSCV      0x0800
 406 #define K1TCR_RPTR      0x0400
 407 #define K1TCR_1000BT_FDX 0x200
 408 #define K1TCR_1000BT_HDX 0x100
 409
 410 #define K1STSR_MSMCFLT  0x8000
 411 #define K1STSR_MSCFGRES 0x4000
 412 #define K1STSR_LRSTAT   0x2000
 413 #define K1STSR_RRSTAT   0x1000
 414 #define K1STSR_LP1KFD   0x0800
 415 #define K1STSR_LP1KHD   0x0400
 416 #define K1STSR_LPASMDIR 0x0200
 417
 418 #define K1SCR_1KX_FDX   0x8000
 419 #define K1SCR_1KX_HDX   0x4000
 420 #define K1SCR_1KT_FDX   0x2000
 421 #define K1SCR_1KT_HDX   0x1000
 422
 423 #define STRAP_PHY1      0x0800
 424 #define STRAP_NCMODE    0x0400
 425 #define STRAP_MANMSCFG  0x0200
 426 #define STRAP_ANENABLE  0x0100
 427 #define STRAP_MSVAL     0x0080
 428 #define STRAP_1KHDXADV  0x0010
 429 #define STRAP_1KFDXADV  0x0008
 430 #define STRAP_100ADV    0x0004
 431 #define STRAP_SPEEDSEL  0x0000
 432 #define STRAP_SPEED100  0x0001
 433
 434 #define PHYSUP_SPEED1000 0x10
 435 #define PHYSUP_SPEED100  0x08
 436 #define PHYSUP_SPEED10   0x00
 437 #define PHYSUP_LINKUP    0x04
 438 #define PHYSUP_FDX       0x02
 439
 440 #define MII_BMCR        0x00    /* Basic mode control register (rw) */
 441 #define MII_BMSR        0x01    /* Basic mode status register (ro) */
 442 #define MII_K1STSR      0x0A    /* 1K Status Register (ro) */
 443 #define MII_ANLPAR      0x05    /* Autonegotiation lnk partner abilities (rw) */
 444
 445
 446 #define M_MAC_MDIO_DIR_OUTPUT   0               /* for clarity */
 447
 448 #define ENABLE          1
 449 #define DISABLE         0
 450
 451 /**********************************************************************
 452  *  SBMAC_MII_SYNC(s)
 453  *
 454  *  Synchronize with the MII - send a pattern of bits to the MII
 455  *  that will guarantee that it is ready to accept a command.
 456  *
 457  *  Input parameters:
 458  *         s - sbmac structure
 459  *
 460  *  Return value:
 461  *         nothing
 462  ********************************************************************* */
 463
 464 static void sbmac_mii_sync(struct sbmac_softc *s)
 465 {
 466         int cnt;
 467         uint64_t bits;
 468         int mac_mdio_genc;
 469
 470         mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC;
 471
 472         bits = M_MAC_MDIO_DIR_OUTPUT | M_MAC_MDIO_OUT;
 473
 474         SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc);
 475
 476         for (cnt = 0; cnt < 32; cnt++) {
 477                 SBMAC_WRITECSR(s->sbm_mdio,bits | M_MAC_MDC | mac_mdio_genc);
 478                 SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc);
 479         }
 480 }
 481
 482 /**********************************************************************
 483  *  SBMAC_MII_SENDDATA(s,data,bitcnt)
 484  *
 485  *  Send some bits to the MII.  The bits to be sent are right-
 486  *  justified in the 'data' parameter.
 487  *
 488  *  Input parameters:
 489  *         s - sbmac structure
 490  *         data - data to send
 491  *         bitcnt - number of bits to send
 492  ********************************************************************* */
 493
 494 static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitcnt)
 495 {
 496         int i;
 497         uint64_t bits;
 498         unsigned int curmask;
 499         int mac_mdio_genc;
 500
 501         mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC;
 502
 503         bits = M_MAC_MDIO_DIR_OUTPUT;
 504         SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc);
 505
 506         curmask = 1 << (bitcnt - 1);
 507
 508         for (i = 0; i < bitcnt; i++) {
 509                 if (data & curmask)
 510                         bits |= M_MAC_MDIO_OUT;
 511                 else bits &= ~M_MAC_MDIO_OUT;
 512                 SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc);
 513                 SBMAC_WRITECSR(s->sbm_mdio,bits | M_MAC_MDC | mac_mdio_genc);
 514                 SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc);
 515                 curmask >>= 1;
 516         }
 517 }
 518
 519
 520
 521 /**********************************************************************
 522  *  SBMAC_MII_READ(s,phyaddr,regidx)
 523  *
 524  *  Read a PHY register.
 525  *
 526  *  Input parameters:
 527  *         s - sbmac structure
 528  *         phyaddr - PHY's address
 529  *         regidx = index of register to read
 530  *
 531  *  Return value:
 532  *         value read, or 0 if an error occurred.
 533  ********************************************************************* */
 534
 535 static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx)
 536 {
 537         int idx;
 538         int error;
 539         int regval;
 540         int mac_mdio_genc;
 541
 542         /*
 543          * Synchronize ourselves so that the PHY knows the next
 544          * thing coming down is a command
 545          */
 546
 547         sbmac_mii_sync(s);
 548
 549         /*
 550          * Send the data to the PHY.  The sequence is
 551          * a "start" command (2 bits)
 552          * a "read" command (2 bits)
 553          * the PHY addr (5 bits)
 554          * the register index (5 bits)
 555          */
 556
 557         sbmac_mii_senddata(s,MII_COMMAND_START, 2);
 558         sbmac_mii_senddata(s,MII_COMMAND_READ, 2);
 559         sbmac_mii_senddata(s,phyaddr, 5);
 560         sbmac_mii_senddata(s,regidx, 5);
 561
 562         mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC;
 563
 564         /*
 565          * Switch the port around without a clock transition.
 566          */
 567         SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_INPUT | mac_mdio_genc);
 568
 569         /*
 570          * Send out a clock pulse to signal we want the status
 571          */
 572
 573         SBMAC_WRITECSR(s->sbm_mdio,
 574                        M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc);
 575         SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_INPUT | mac_mdio_genc);
 576
 577         /*
 578          * If an error occurred, the PHY will signal '1' back
 579          */
 580         error = SBMAC_READCSR(s->sbm_mdio) & M_MAC_MDIO_IN;
 581
 582         /*
 583          * Issue an 'idle' clock pulse, but keep the direction
 584          * the same.
 585          */
 586         SBMAC_WRITECSR(s->sbm_mdio,
 587                        M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc);
 588         SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_INPUT | mac_mdio_genc);
 589
 590         regval = 0;
 591
 592         for (idx = 0; idx < 16; idx++) {
 593                 regval <<= 1;
 594
 595                 if (error == 0) {
 596                         if (SBMAC_READCSR(s->sbm_mdio) & M_MAC_MDIO_IN)
 597                                 regval |= 1;
 598                 }
 599
 600                 SBMAC_WRITECSR(s->sbm_mdio,
 601                                M_MAC_MDIO_DIR_INPUT|M_MAC_MDC | mac_mdio_genc);
 602                 SBMAC_WRITECSR(s->sbm_mdio,
 603                                M_MAC_MDIO_DIR_INPUT | mac_mdio_genc);
 604         }
 605
 606         /* Switch back to output */
 607         SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc);
 608
 609         if (error == 0)
 610                 return regval;
 611         return 0;
 612 }
 613
 614
 615 /**********************************************************************
 616  *  SBMAC_MII_WRITE(s,phyaddr,regidx,regval)
 617  *
 618  *  Write a value to a PHY register.
 619  *
 620  *  Input parameters:
 621  *         s - sbmac structure
 622  *         phyaddr - PHY to use
 623  *         regidx - register within the PHY
 624  *         regval - data to write to register
 625  *
 626  *  Return value:
 627  *         nothing
 628  ********************************************************************* */
 629
 630 static void sbmac_mii_write(struct sbmac_softc *s,int phyaddr,int regidx,
 631                             unsigned int regval)
 632 {
 633         int mac_mdio_genc;
 634
 635         sbmac_mii_sync(s);
 636
 637         sbmac_mii_senddata(s,MII_COMMAND_START,2);
 638         sbmac_mii_senddata(s,MII_COMMAND_WRITE,2);
 639         sbmac_mii_senddata(s,phyaddr, 5);
 640         sbmac_mii_senddata(s,regidx, 5);
 641         sbmac_mii_senddata(s,MII_COMMAND_ACK,2);
 642         sbmac_mii_senddata(s,regval,16);
 643
 644         mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC;
 645
 646         SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc);
 647 }
 648
 649
 650
 651 /**********************************************************************
 652  *  SBDMA_INITCTX(d,s,chan,txrx,maxdescr)
 653  *
 654  *  Initialize a DMA channel context.  Since there are potentially
 655  *  eight DMA channels per MAC, it's nice to do this in a standard
 656  *  way.
 657  *
 658  *  Input parameters:
 659  *         d - sbmacdma_t structure (DMA channel context)
 660  *         s - sbmac_softc structure (pointer to a MAC)
 661  *         chan - channel number (0..1 right now)
 662  *         txrx - Identifies DMA_TX or DMA_RX for channel direction
 663  *      maxdescr - number of descriptors
 664  *
 665  *  Return value:
 666  *         nothing
 667  ********************************************************************* */
 668
 669 static void sbdma_initctx(sbmacdma_t *d,
 670                           struct sbmac_softc *s,
 671                           int chan,
 672                           int txrx,
 673                           int maxdescr)
 674 {
 675         /*
 676          * Save away interesting stuff in the structure
 677          */
 678
 679         d->sbdma_eth       = s;
 680         d->sbdma_channel   = chan;
 681         d->sbdma_txdir     = txrx;
 682
 683 #if 0
 684         /* RMON clearing */
 685         s->sbe_idx =(s->sbm_base - A_MAC_BASE_0)/MAC_SPACING;
 686 #endif
 687
 688         SBMAC_WRITECSR(IOADDR(
 689         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BYTES)), 0);
 690         SBMAC_WRITECSR(IOADDR(
 691         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_COLLISIONS)), 0);
 692         SBMAC_WRITECSR(IOADDR(
 693         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_LATE_COL)), 0);
 694         SBMAC_WRITECSR(IOADDR(
 695         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_EX_COL)), 0);
 696         SBMAC_WRITECSR(IOADDR(
 697         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_FCS_ERROR)), 0);
 698         SBMAC_WRITECSR(IOADDR(
 699         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_ABORT)), 0);
 700         SBMAC_WRITECSR(IOADDR(
 701         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BAD)), 0);
 702         SBMAC_WRITECSR(IOADDR(
 703         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_GOOD)), 0);
 704         SBMAC_WRITECSR(IOADDR(
 705         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_RUNT)), 0);
 706         SBMAC_WRITECSR(IOADDR(
 707         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_OVERSIZE)), 0);
 708         SBMAC_WRITECSR(IOADDR(
 709         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BYTES)), 0);
 710         SBMAC_WRITECSR(IOADDR(
 711         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_MCAST)), 0);
 712         SBMAC_WRITECSR(IOADDR(
 713         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BCAST)), 0);
 714         SBMAC_WRITECSR(IOADDR(
 715         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BAD)), 0);
 716         SBMAC_WRITECSR(IOADDR(
 717         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_GOOD)), 0);
 718         SBMAC_WRITECSR(IOADDR(
 719         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_RUNT)), 0);
 720         SBMAC_WRITECSR(IOADDR(
 721         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_OVERSIZE)), 0);
 722         SBMAC_WRITECSR(IOADDR(
 723         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_FCS_ERROR)), 0);
 724         SBMAC_WRITECSR(IOADDR(
 725         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_LENGTH_ERROR)), 0);
 726         SBMAC_WRITECSR(IOADDR(
 727         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_CODE_ERROR)), 0);
 728         SBMAC_WRITECSR(IOADDR(
 729         A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_ALIGN_ERROR)), 0);
 730
 731         /*
 732          * initialize register pointers
 733          */
 734
 735         d->sbdma_config0 =
 736                 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG0);
 737         d->sbdma_config1 =
 738                 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG1);
 739         d->sbdma_dscrbase =
 740                 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_BASE);
 741         d->sbdma_dscrcnt =
 742                 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_CNT);
 743         d->sbdma_curdscr =
 744                 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CUR_DSCRADDR);
 745
 746         /*
 747          * Allocate memory for the ring
 748          */
 749
 750         d->sbdma_maxdescr = maxdescr;
 751
 752         d->sbdma_dscrtable = (sbdmadscr_t *)
 753                 kmalloc(d->sbdma_maxdescr*sizeof(sbdmadscr_t), GFP_KERNEL);
 754
 755         memset(d->sbdma_dscrtable,0,d->sbdma_maxdescr*sizeof(sbdmadscr_t));
 756
 757         d->sbdma_dscrtable_end = d->sbdma_dscrtable + d->sbdma_maxdescr;
 758
 759         d->sbdma_dscrtable_phys = virt_to_phys(d->sbdma_dscrtable);
 760
 761         /*
 762          * And context table
 763          */
 764
 765         d->sbdma_ctxtable = (struct sk_buff **)
 766                 kmalloc(d->sbdma_maxdescr*sizeof(struct sk_buff *), GFP_KERNEL);
 767
 768         memset(d->sbdma_ctxtable,0,d->sbdma_maxdescr*sizeof(struct sk_buff *));
 769
 770 #ifdef CONFIG_SBMAC_COALESCE
 771         /*
 772          * Setup Rx/Tx DMA coalescing defaults
 773          */
 774
 775         if ( int_pktcnt ) {
 776                 d->sbdma_int_pktcnt = int_pktcnt;
 777         } else {
 778                 d->sbdma_int_pktcnt = 1;
 779         }
 780
 781         if ( int_timeout ) {
 782                 d->sbdma_int_timeout = int_timeout;
 783         } else {
 784                 d->sbdma_int_timeout = 0;
 785         }
 786 #endif
 787
 788 }
 789
 790 /**********************************************************************
 791  *  SBDMA_CHANNEL_START(d)
 792  *
 793  *  Initialize the hardware registers for a DMA channel.
 794  *
 795  *  Input parameters:
 796  *         d - DMA channel to init (context must be previously init'd
 797  *         rxtx - DMA_RX or DMA_TX depending on what type of channel
 798  *
 799  *  Return value:
 800  *         nothing
 801  ********************************************************************* */
 802
 803 static void sbdma_channel_start(sbmacdma_t *d, int rxtx )
 804 {
 805         /*
 806          * Turn on the DMA channel
 807          */
 808
 809 #ifdef CONFIG_SBMAC_COALESCE
 810         SBMAC_WRITECSR(d->sbdma_config1,
 811                        V_DMA_INT_TIMEOUT(d->sbdma_int_timeout) |
 812                        0);
 813         SBMAC_WRITECSR(d->sbdma_config0,
 814                        M_DMA_EOP_INT_EN |
 815                        V_DMA_RINGSZ(d->sbdma_maxdescr) |
 816                        V_DMA_INT_PKTCNT(d->sbdma_int_pktcnt) |
 817                        0);
 818 #else
 819         SBMAC_WRITECSR(d->sbdma_config1,0);
 820         SBMAC_WRITECSR(d->sbdma_config0,
 821                        V_DMA_RINGSZ(d->sbdma_maxdescr) |
 822                        0);
 823 #endif
 824
 825         SBMAC_WRITECSR(d->sbdma_dscrbase,d->sbdma_dscrtable_phys);
 826
 827         /*
 828          * Initialize ring pointers
 829          */
 830
 831         d->sbdma_addptr = d->sbdma_dscrtable;
 832         d->sbdma_remptr = d->sbdma_dscrtable;
 833 }
 834
 835 /**********************************************************************
 836  *  SBDMA_CHANNEL_STOP(d)
 837  *
 838  *  Initialize the hardware registers for a DMA channel.
 839  *
 840  *  Input parameters:
 841  *         d - DMA channel to init (context must be previously init'd
 842  *
 843  *  Return value:
 844  *         nothing
 845  ********************************************************************* */
 846
 847 static void sbdma_channel_stop(sbmacdma_t *d)
 848 {
 849         /*
 850          * Turn off the DMA channel
 851          */
 852
 853         SBMAC_WRITECSR(d->sbdma_config1,0);
 854
 855         SBMAC_WRITECSR(d->sbdma_dscrbase,0);
 856
 857         SBMAC_WRITECSR(d->sbdma_config0,0);
 858
 859         /*
 860          * Zero ring pointers
 861          */
 862
 863         d->sbdma_addptr = 0;
 864         d->sbdma_remptr = 0;
 865 }
 866
 867 static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset)
 868 {
 869         unsigned long addr;
 870         unsigned long newaddr;
 871
 872         addr = (unsigned long) skb->data;
 873
 874         newaddr = (addr + power2 - 1) & ~(power2 - 1);
 875
 876         skb_reserve(skb,newaddr-addr+offset);
 877 }
 878
 879
 880 /**********************************************************************
 881  *  SBDMA_ADD_RCVBUFFER(d,sb)
 882  *
 883  *  Add a buffer to the specified DMA channel.   For receive channels,
 884  *  this queues a buffer for inbound packets.
 885  *
 886  *  Input parameters:
 887  *         d - DMA channel descriptor
 888  *         sb - sk_buff to add, or NULL if we should allocate one
 889  *
 890  *  Return value:
 891  *         0 if buffer could not be added (ring is full)
 892  *         1 if buffer added successfully
 893  ********************************************************************* */
 894
 895
 896 static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb)
 897 {
 898         sbdmadscr_t *dsc;
 899         sbdmadscr_t *nextdsc;
 900         struct sk_buff *sb_new = NULL;
 901         int pktsize = ENET_PACKET_SIZE;
 902
 903         /* get pointer to our current place in the ring */
 904
 905         dsc = d->sbdma_addptr;
 906         nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr);
 907
 908         /*
 909          * figure out if the ring is full - if the next descriptor
 910          * is the same as the one that we're going to remove from
 911          * the ring, the ring is full
 912          */
 913
 914         if (nextdsc == d->sbdma_remptr) {
 915                 return -ENOSPC;
 916         }
 917
 918         /*
 919          * Allocate a sk_buff if we don't already have one.
 920          * If we do have an sk_buff, reset it so that it's empty.
 921          *
 922          * Note: sk_buffs don't seem to be guaranteed to have any sort
 923          * of alignment when they are allocated.  Therefore, allocate enough
 924          * extra space to make sure that:
 925          *
 926          *    1. the data does not start in the middle of a cache line.
 927          *    2. The data does not end in the middle of a cache line
 928          *    3. The buffer can be aligned such that the IP addresses are
 929          *       naturally aligned.
 930          *
 931          *  Remember, the SOCs MAC writes whole cache lines at a time,
 932          *  without reading the old contents first.  So, if the sk_buff's
 933          *  data portion starts in the middle of a cache line, the SOC
 934          *  DMA will trash the beginning (and ending) portions.
 935          */
 936
 937         if (sb == NULL) {
 938                 sb_new = dev_alloc_skb(ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN);
 939                 if (sb_new == NULL) {
 940                         printk(KERN_INFO "%s: sk_buff allocation failed\n",
 941                                d->sbdma_eth->sbm_dev->name);
 942                         return -ENOBUFS;
 943                 }
 944
 945                 sbdma_align_skb(sb_new, SMP_CACHE_BYTES, ETHER_ALIGN);
 946
 947                 /* mark skbuff owned by our device */
 948                 sb_new->dev = d->sbdma_eth->sbm_dev;
 949         }
 950         else {
 951                 sb_new = sb;
 952                 /*
 953                  * nothing special to reinit buffer, it's already aligned
 954                  * and sb->data already points to a good place.
 955                  */
 956         }
 957
 958         /*
 959          * fill in the descriptor
 960          */
 961
 962 #ifdef CONFIG_SBMAC_COALESCE
 963         /*
 964          * Do not interrupt per DMA transfer.
 965          */
 966         dsc->dscr_a = virt_to_phys(sb_new->tail) |
 967                 V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) |
 968                 0;
 969 #else
 970         dsc->dscr_a = virt_to_phys(sb_new->tail) |
 971                 V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) |
 972                 M_DMA_DSCRA_INTERRUPT;
 973 #endif
 974
 975         /* receiving: no options */
 976         dsc->dscr_b = 0;
 977
 978         /*
 979          * fill in the context
 980          */
 981
 982         d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb_new;
 983
 984         /*
 985          * point at next packet
 986          */
 987
 988         d->sbdma_addptr = nextdsc;
 989
 990         /*
 991          * Give the buffer to the DMA engine.
 992          */
 993
 994         SBMAC_WRITECSR(d->sbdma_dscrcnt,1);
 995
 996         return 0;                                       /* we did it */
 997 }
 998
 999 /**********************************************************************
1000  *  SBDMA_ADD_TXBUFFER(d,sb)
1001  *
1002  *  Add a transmit buffer to the specified DMA channel, causing a
1003  *  transmit to start.
1004  *
1005  *  Input parameters:
1006  *         d - DMA channel descriptor
1007  *         sb - sk_buff to add
1008  *
1009  *  Return value:
1010  *         0 transmit queued successfully
1011  *         otherwise error code
1012  ********************************************************************* */
1013
1014
1015 static int sbdma_add_txbuffer(sbmacdma_t *d,struct sk_buff *sb)
1016 {
1017         sbdmadscr_t *dsc;
1018         sbdmadscr_t *nextdsc;
1019         uint64_t phys;
1020         uint64_t ncb;
1021         int length;
1022
1023         /* get pointer to our current place in the ring */
1024
1025         dsc = d->sbdma_addptr;
1026         nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr);
1027
1028         /*
1029          * figure out if the ring is full - if the next descriptor
1030          * is the same as the one that we're going to remove from
1031          * the ring, the ring is full
1032          */
1033
1034         if (nextdsc == d->sbdma_remptr) {
1035                 return -ENOSPC;
1036         }
1037
1038         /*
1039          * Under Linux, it's not necessary to copy/coalesce buffers
1040          * like it is on NetBSD.  We think they're all contiguous,
1041          * but that may not be true for GBE.
1042          */
1043
1044         length = sb->len;
1045
1046         /*
1047          * fill in the descriptor.  Note that the number of cache
1048          * blocks in the descriptor is the number of blocks
1049          * *spanned*, so we need to add in the offset (if any)
1050          * while doing the calculation.
1051          */
1052
1053         phys = virt_to_phys(sb->data);
1054         ncb = NUMCACHEBLKS(length+(phys & (SMP_CACHE_BYTES - 1)));
1055
1056         dsc->dscr_a = phys |
1057                 V_DMA_DSCRA_A_SIZE(ncb) |
1058 #ifndef CONFIG_SBMAC_COALESCE
1059                 M_DMA_DSCRA_INTERRUPT |
1060 #endif
1061                 M_DMA_ETHTX_SOP;
1062
1063         /* transmitting: set outbound options and length */
1064
1065         dsc->dscr_b = V_DMA_DSCRB_OPTIONS(K_DMA_ETHTX_APPENDCRC_APPENDPAD) |
1066                 V_DMA_DSCRB_PKT_SIZE(length);
1067
1068         /*
1069          * fill in the context
1070          */
1071
1072         d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb;
1073
1074         /*
1075          * point at next packet
1076          */
1077
1078         d->sbdma_addptr = nextdsc;
1079
1080         /*
1081          * Give the buffer to the DMA engine.
1082          */
1083
1084         SBMAC_WRITECSR(d->sbdma_dscrcnt,1);
1085
1086         return 0;                                       /* we did it */
1087 }
1088
1089
1090
1091
1092 /**********************************************************************
1093  *  SBDMA_EMPTYRING(d)
1094  *
1095  *  Free all allocated sk_buffs on the specified DMA channel;
1096  *
1097  *  Input parameters:
1098  *         d  - DMA channel
1099  *
1100  *  Return value:
1101  *         nothing
1102  ********************************************************************* */
1103
1104 static void sbdma_emptyring(sbmacdma_t *d)
1105 {
1106         int idx;
1107         struct sk_buff *sb;
1108
1109         for (idx = 0; idx < d->sbdma_maxdescr; idx++) {
1110                 sb = d->sbdma_ctxtable[idx];
1111                 if (sb) {
1112                         dev_kfree_skb(sb);
1113                         d->sbdma_ctxtable[idx] = NULL;
1114                 }
1115         }
1116 }
1117
1118
1119 /**********************************************************************
1120  *  SBDMA_FILLRING(d)
1121  *
1122  *  Fill the specified DMA channel (must be receive channel)
1123  *  with sk_buffs
1124  *
1125  *  Input parameters:
1126  *         d - DMA channel
1127  *
1128  *  Return value:
1129  *         nothing
1130  ********************************************************************* */
1131
1132 static void sbdma_fillring(sbmacdma_t *d)
1133 {
1134         int idx;
1135
1136         for (idx = 0; idx < SBMAC_MAX_RXDESCR-1; idx++) {
1137                 if (sbdma_add_rcvbuffer(d,NULL) != 0)
1138                         break;
1139         }
1140 }
1141
1142
1143 /**********************************************************************
1144  *  SBDMA_RX_PROCESS(sc,d)
1145  *
1146  *  Process "completed" receive buffers on the specified DMA channel.
1147  *  Note that this isn't really ideal for priority channels, since
1148  *  it processes all of the packets on a given channel before
1149  *  returning.
1150  *
1151  *  Input parameters:
1152  *         sc - softc structure
1153  *         d - DMA channel context
1154  *
1155  *  Return value:
1156  *         nothing
1157  ********************************************************************* */
1158
1159 static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d)
1160 {
1161         int curidx;
1162         int hwidx;
1163         sbdmadscr_t *dsc;
1164         struct sk_buff *sb;
1165         int len;
1166
1167         for (;;) {
1168                 /*
1169                  * figure out where we are (as an index) and where
1170                  * the hardware is (also as an index)
1171                  *
1172                  * This could be done faster if (for example) the
1173                  * descriptor table was page-aligned and contiguous in
1174                  * both virtual and physical memory -- you could then
1175                  * just compare the low-order bits of the virtual address
1176                  * (sbdma_remptr) and the physical address (sbdma_curdscr CSR)
1177                  */
1178
1179                 curidx = d->sbdma_remptr - d->sbdma_dscrtable;
1180                 hwidx = (int) (((SBMAC_READCSR(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) -
1181                                 d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t));
1182
1183                 /*
1184                  * If they're the same, that means we've processed all
1185                  * of the descriptors up to (but not including) the one that
1186                  * the hardware is working on right now.
1187                  */
1188
1189                 if (curidx == hwidx)
1190                         break;
1191
1192                 /*
1193                  * Otherwise, get the packet's sk_buff ptr back
1194                  */
1195
1196                 dsc = &(d->sbdma_dscrtable[curidx]);
1197                 sb = d->sbdma_ctxtable[curidx];
1198                 d->sbdma_ctxtable[curidx] = NULL;
1199
1200                 len = (int)G_DMA_DSCRB_PKT_SIZE(dsc->dscr_b) - 4;
1201
1202                 /*
1203                  * Check packet status.  If good, process it.
1204                  * If not, silently drop it and put it back on the
1205                  * receive ring.
1206                  */
1207
1208                 if (!(dsc->dscr_a & M_DMA_ETHRX_BAD)) {
1209
1210                         /*
1211                          * Add a new buffer to replace the old one.  If we fail
1212                          * to allocate a buffer, we're going to drop this
1213                          * packet and put it right back on the receive ring.
1214                          */
1215
1216                         if (sbdma_add_rcvbuffer(d,NULL) == -ENOBUFS) {
1217                                 sc->sbm_stats.rx_dropped++;
1218                                 sbdma_add_rcvbuffer(d,sb); /* re-add old buffer */
1219                         } else {
1220                                 /*
1221                                  * Set length into the packet
1222                                  */
1223                                 skb_put(sb,len);
1224
1225                                 /*
1226                                  * Buffer has been replaced on the
1227                                  * receive ring.  Pass the buffer to
1228                                  * the kernel
1229                                  */
1230                                 sc->sbm_stats.rx_bytes += len;
1231                                 sc->sbm_stats.rx_packets++;
1232                                 sb->protocol = eth_type_trans(sb,d->sbdma_eth->sbm_dev);
1233                                 /* Check hw IPv4/TCP checksum if supported */
1234                                 if (sc->rx_hw_checksum == ENABLE) {
1235                                         if (!((dsc->dscr_a) & M_DMA_ETHRX_BADIP4CS) &&
1236                                             !((dsc->dscr_a) & M_DMA_ETHRX_BADTCPCS)) {
1237                                                 sb->ip_summed = CHECKSUM_UNNECESSARY;
1238                                                 /* don't need to set sb->csum */
1239                                         } else {
1240                                                 sb->ip_summed = CHECKSUM_NONE;
1241                                         }
1242                                 }
1243
1244                                 netif_rx(sb);
1245                         }
1246                 } else {
1247                         /*
1248                          * Packet was mangled somehow.  Just drop it and
1249                          * put it back on the receive ring.
1250                          */
1251                         sc->sbm_stats.rx_errors++;
1252                         sbdma_add_rcvbuffer(d,sb);
1253                 }
1254
1255
1256                 /*
1257                  * .. and advance to the next buffer.
1258                  */
1259
1260                 d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
1261
1262         }
1263 }
1264
1265
1266
1267 /**********************************************************************
1268  *  SBDMA_TX_PROCESS(sc,d)
1269  *
1270  *  Process "completed" transmit buffers on the specified DMA channel.
1271  *  This is normally called within the interrupt service routine.
1272  *  Note that this isn't really ideal for priority channels, since
1273  *  it processes all of the packets on a given channel before
1274  *  returning.
1275  *
1276  *  Input parameters:
1277  *      sc - softc structure
1278  *         d - DMA channel context
1279  *
1280  *  Return value:
1281  *         nothing
1282  ********************************************************************* */
1283
1284 static void sbdma_tx_process(struct sbmac_softc *sc,sbmacdma_t *d)
1285 {
1286         int curidx;
1287         int hwidx;
1288         sbdmadscr_t *dsc;
1289         struct sk_buff *sb;
1290         unsigned long flags;
1291
1292         spin_lock_irqsave(&(sc->sbm_lock), flags);
1293
1294         for (;;) {
1295                 /*
1296                  * figure out where we are (as an index) and where
1297                  * the hardware is (also as an index)
1298                  *
1299                  * This could be done faster if (for example) the
1300                  * descriptor table was page-aligned and contiguous in
1301                  * both virtual and physical memory -- you could then
1302                  * just compare the low-order bits of the virtual address
1303                  * (sbdma_remptr) and the physical address (sbdma_curdscr CSR)
1304                  */
1305
1306                 curidx = d->sbdma_remptr - d->sbdma_dscrtable;
1307                 hwidx = (int) (((SBMAC_READCSR(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) -
1308                                 d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t));
1309
1310                 /*
1311                  * If they're the same, that means we've processed all
1312                  * of the descriptors up to (but not including) the one that
1313                  * the hardware is working on right now.
1314                  */
1315
1316                 if (curidx == hwidx)
1317                         break;
1318
1319                 /*
1320                  * Otherwise, get the packet's sk_buff ptr back
1321                  */
1322
1323                 dsc = &(d->sbdma_dscrtable[curidx]);
1324                 sb = d->sbdma_ctxtable[curidx];
1325                 d->sbdma_ctxtable[curidx] = NULL;
1326
1327                 /*
1328                  * Stats
1329                  */
1330
1331                 sc->sbm_stats.tx_bytes += sb->len;
1332                 sc->sbm_stats.tx_packets++;
1333
1334                 /*
1335                  * for transmits, we just free buffers.
1336                  */
1337
1338                 dev_kfree_skb_irq(sb);
1339
1340                 /*
1341                  * .. and advance to the next buffer.
1342                  */
1343
1344                 d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
1345
1346         }
1347
1348         /*
1349          * Decide if we should wake up the protocol or not.
1350          * Other drivers seem to do this when we reach a low
1351          * watermark on the transmit queue.
1352          */
1353
1354         netif_wake_queue(d->sbdma_eth->sbm_dev);
1355
1356         spin_unlock_irqrestore(&(sc->sbm_lock), flags);
1357
1358 }
1359
1360
1361
1362 /**********************************************************************
1363  *  SBMAC_INITCTX(s)
1364  *
1365  *  Initialize an Ethernet context structure - this is called
1366  *  once per MAC on the 1250.  Memory is allocated here, so don't
1367  *  call it again from inside the ioctl routines that bring the
1368  *  interface up/down
1369  *
1370  *  Input parameters:
1371  *         s - sbmac context structure
1372  *
1373  *  Return value:
1374  *         0
1375  ********************************************************************* */
1376
1377 static int sbmac_initctx(struct sbmac_softc *s)
1378 {
1379
1380         /*
1381          * figure out the addresses of some ports
1382          */
1383
1384         s->sbm_macenable = s->sbm_base + R_MAC_ENABLE;
1385         s->sbm_maccfg    = s->sbm_base + R_MAC_CFG;
1386         s->sbm_fifocfg   = s->sbm_base + R_MAC_THRSH_CFG;
1387         s->sbm_framecfg  = s->sbm_base + R_MAC_FRAMECFG;
1388         s->sbm_rxfilter  = s->sbm_base + R_MAC_ADFILTER_CFG;
1389         s->sbm_isr       = s->sbm_base + R_MAC_STATUS;
1390         s->sbm_imr       = s->sbm_base + R_MAC_INT_MASK;
1391         s->sbm_mdio      = s->sbm_base + R_MAC_MDIO;
1392
1393         s->sbm_phys[0]   = 1;
1394         s->sbm_phys[1]   = 0;
1395
1396         s->sbm_phy_oldbmsr = 0;
1397         s->sbm_phy_oldanlpar = 0;
1398         s->sbm_phy_oldk1stsr = 0;
1399         s->sbm_phy_oldlinkstat = 0;
1400
1401         /*
1402          * Initialize the DMA channels.  Right now, only one per MAC is used
1403          * Note: Only do this _once_, as it allocates memory from the kernel!
1404          */
1405
1406         sbdma_initctx(&(s->sbm_txdma),s,0,DMA_TX,SBMAC_MAX_TXDESCR);
1407         sbdma_initctx(&(s->sbm_rxdma),s,0,DMA_RX,SBMAC_MAX_RXDESCR);
1408
1409         /*
1410          * initial state is OFF
1411          */
1412
1413         s->sbm_state = sbmac_state_off;
1414
1415         /*
1416          * Initial speed is (XXX TEMP) 10MBit/s HDX no FC
1417          */
1418
1419         s->sbm_speed = sbmac_speed_10;
1420         s->sbm_duplex = sbmac_duplex_half;
1421         s->sbm_fc = sbmac_fc_disabled;
1422
1423         return 0;
1424 }
1425
1426
1427 static void sbdma_uninitctx(struct sbmacdma_s *d)
1428 {
1429         if (d->sbdma_dscrtable) {
1430                 kfree(d->sbdma_dscrtable);
1431                 d->sbdma_dscrtable = NULL;
1432         }
1433
1434         if (d->sbdma_ctxtable) {
1435                 kfree(d->sbdma_ctxtable);
1436                 d->sbdma_ctxtable = NULL;
1437         }
1438 }
1439
1440
1441 static void sbmac_uninitctx(struct sbmac_softc *sc)
1442 {
1443         sbdma_uninitctx(&(sc->sbm_txdma));
1444         sbdma_uninitctx(&(sc->sbm_rxdma));
1445 }
1446
1447
1448 /**********************************************************************
1449  *  SBMAC_CHANNEL_START(s)
1450  *
1451  *  Start packet processing on this MAC.
1452  *
1453  *  Input parameters:
1454  *         s - sbmac structure
1455  *
1456  *  Return value:
1457  *         nothing
1458  ********************************************************************* */
1459
1460 static void sbmac_channel_start(struct sbmac_softc *s)
1461 {
1462         uint64_t reg;
1463         sbmac_port_t port;
1464         uint64_t cfg,fifo,framecfg;
1465         int idx, th_value;
1466
1467         /*
1468          * Don't do this if running
1469          */
1470
1471         if (s->sbm_state == sbmac_state_on)
1472                 return;
1473
1474         /*
1475          * Bring the controller out of reset, but leave it off.
1476          */
1477
1478         SBMAC_WRITECSR(s->sbm_macenable,0);
1479
1480         /*
1481          * Ignore all received packets
1482          */
1483
1484         SBMAC_WRITECSR(s->sbm_rxfilter,0);
1485
1486         /*
1487          * Calculate values for various control registers.
1488          */
1489
1490         cfg = M_MAC_RETRY_EN |
1491                 M_MAC_TX_HOLD_SOP_EN |
1492                 V_MAC_TX_PAUSE_CNT_16K |
1493                 M_MAC_AP_STAT_EN |
1494                 M_MAC_FAST_SYNC |
1495                 M_MAC_SS_EN |
1496                 0;
1497
1498         /*
1499          * Be sure that RD_THRSH+WR_THRSH <= 32 for pass1 pars
1500          * and make sure that RD_THRSH + WR_THRSH <=128 for pass2 and above
1501          * Use a larger RD_THRSH for gigabit
1502          */
1503         if (periph_rev >= 2)
1504                 th_value = 64;
1505         else
1506                 th_value = 28;
1507
1508         fifo = V_MAC_TX_WR_THRSH(4) |   /* Must be '4' or '8' */
1509                 ((s->sbm_speed == sbmac_speed_1000)
1510                  ? V_MAC_TX_RD_THRSH(th_value) : V_MAC_TX_RD_THRSH(4)) |
1511                 V_MAC_TX_RL_THRSH(4) |
1512                 V_MAC_RX_PL_THRSH(4) |
1513                 V_MAC_RX_RD_THRSH(4) |  /* Must be '4' */
1514                 V_MAC_RX_PL_THRSH(4) |
1515                 V_MAC_RX_RL_THRSH(8) |
1516                 0;
1517
1518         framecfg = V_MAC_MIN_FRAMESZ_DEFAULT |
1519                 V_MAC_MAX_FRAMESZ_DEFAULT |
1520                 V_MAC_BACKOFF_SEL(1);
1521
1522         /*
1523          * Clear out the hash address map
1524          */
1525
1526         port = s->sbm_base + R_MAC_HASH_BASE;
1527         for (idx = 0; idx < MAC_HASH_COUNT; idx++) {
1528                 SBMAC_WRITECSR(port,0);
1529                 port += sizeof(uint64_t);
1530         }
1531
1532         /*
1533          * Clear out the exact-match table
1534          */
1535
1536         port = s->sbm_base + R_MAC_ADDR_BASE;
1537         for (idx = 0; idx < MAC_ADDR_COUNT; idx++) {
1538                 SBMAC_WRITECSR(port,0);
1539                 port += sizeof(uint64_t);
1540         }
1541
1542         /*
1543          * Clear out the DMA Channel mapping table registers
1544          */
1545
1546         port = s->sbm_base + R_MAC_CHUP0_BASE;
1547         for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) {
1548                 SBMAC_WRITECSR(port,0);
1549                 port += sizeof(uint64_t);
1550         }
1551
1552
1553         port = s->sbm_base + R_MAC_CHLO0_BASE;
1554         for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) {
1555                 SBMAC_WRITECSR(port,0);
1556                 port += sizeof(uint64_t);
1557         }
1558
1559         /*
1560          * Program the hardware address.  It goes into the hardware-address
1561          * register as well as the first filter register.
1562          */
1563
1564         reg = sbmac_addr2reg(s->sbm_hwaddr);
1565
1566         port = s->sbm_base + R_MAC_ADDR_BASE;
1567         SBMAC_WRITECSR(port,reg);
1568         port = s->sbm_base + R_MAC_ETHERNET_ADDR;
1569
1570 #ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
1571         /*
1572          * Pass1 SOCs do not receive packets addressed to the
1573          * destination address in the R_MAC_ETHERNET_ADDR register.
1574          * Set the value to zero.
1575          */
1576         SBMAC_WRITECSR(port,0);
1577 #else
1578         SBMAC_WRITECSR(port,reg);
1579 #endif
1580
1581         /*
1582          * Set the receive filter for no packets, and write values
1583          * to the various config registers
1584          */
1585
1586         SBMAC_WRITECSR(s->sbm_rxfilter,0);
1587         SBMAC_WRITECSR(s->sbm_imr,0);
1588         SBMAC_WRITECSR(s->sbm_framecfg,framecfg);
1589         SBMAC_WRITECSR(s->sbm_fifocfg,fifo);
1590         SBMAC_WRITECSR(s->sbm_maccfg,cfg);
1591
1592         /*
1593          * Initialize DMA channels (rings should be ok now)
1594          */
1595
1596         sbdma_channel_start(&(s->sbm_rxdma), DMA_RX);
1597         sbdma_channel_start(&(s->sbm_txdma), DMA_TX);
1598
1599         /*
1600          * Configure the speed, duplex, and flow control
1601          */
1602
1603         sbmac_set_speed(s,s->sbm_speed);
1604         sbmac_set_duplex(s,s->sbm_duplex,s->sbm_fc);
1605
1606         /*
1607          * Fill the receive ring
1608          */
1609
1610         sbdma_fillring(&(s->sbm_rxdma));
1611
1612         /*
1613          * Turn on the rest of the bits in the enable register
1614          */
1615
1616         SBMAC_WRITECSR(s->sbm_macenable,
1617                        M_MAC_RXDMA_EN0 |
1618                        M_MAC_TXDMA_EN0 |
1619                        M_MAC_RX_ENABLE |
1620                        M_MAC_TX_ENABLE);
1621
1622
1623
1624
1625 #ifdef CONFIG_SBMAC_COALESCE
1626         /*
1627          * Accept any TX interrupt and EOP count/timer RX interrupts on ch 0
1628          */
1629         SBMAC_WRITECSR(s->sbm_imr,
1630                        ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) |
1631                        ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0));
1632 #else
1633         /*
1634          * Accept any kind of interrupt on TX and RX DMA channel 0
1635          */
1636         SBMAC_WRITECSR(s->sbm_imr,
1637                        (M_MAC_INT_CHANNEL << S_MAC_TX_CH0) |
1638                        (M_MAC_INT_CHANNEL << S_MAC_RX_CH0));
1639 #endif
1640
1641         /*
1642          * Enable receiving unicasts and broadcasts
1643          */
1644
1645         SBMAC_WRITECSR(s->sbm_rxfilter,M_MAC_UCAST_EN | M_MAC_BCAST_EN);
1646
1647         /*
1648          * we're running now.
1649          */
1650
1651         s->sbm_state = sbmac_state_on;
1652
1653         /*
1654          * Program multicast addresses
1655          */
1656
1657         sbmac_setmulti(s);
1658
1659         /*
1660          * If channel was in promiscuous mode before, turn that on
1661          */
1662
1663         if (s->sbm_devflags & IFF_PROMISC) {
1664                 sbmac_promiscuous_mode(s,1);
1665         }
1666
1667 }
1668
1669
1670 /**********************************************************************
1671  *  SBMAC_CHANNEL_STOP(s)
1672  *
1673  *  Stop packet processing on this MAC.
1674  *
1675  *  Input parameters:
1676  *         s - sbmac structure
1677  *
1678  *  Return value:
1679  *         nothing
1680  ********************************************************************* */
1681
1682 static void sbmac_channel_stop(struct sbmac_softc *s)
1683 {
1684         /* don't do this if already stopped */
1685
1686         if (s->sbm_state == sbmac_state_off)
1687                 return;
1688
1689         /* don't accept any packets, disable all interrupts */
1690
1691         SBMAC_WRITECSR(s->sbm_rxfilter,0);
1692         SBMAC_WRITECSR(s->sbm_imr,0);
1693
1694         /* Turn off ticker */
1695
1696         /* XXX */
1697
1698         /* turn off receiver and transmitter */
1699
1700         SBMAC_WRITECSR(s->sbm_macenable,0);
1701
1702         /* We're stopped now. */
1703
1704         s->sbm_state = sbmac_state_off;
1705
1706         /*
1707          * Stop DMA channels (rings should be ok now)
1708          */
1709
1710         sbdma_channel_stop(&(s->sbm_rxdma));
1711         sbdma_channel_stop(&(s->sbm_txdma));
1712
1713         /* Empty the receive and transmit rings */
1714
1715         sbdma_emptyring(&(s->sbm_rxdma));
1716         sbdma_emptyring(&(s->sbm_txdma));
1717
1718 }
1719
1720 /**********************************************************************
1721  *  SBMAC_SET_CHANNEL_STATE(state)
1722  *
1723  *  Set the channel's state ON or OFF
1724  *
1725  *  Input parameters:
1726  *         state - new state
1727  *
1728  *  Return value:
1729  *         old state
1730  ********************************************************************* */
1731 static sbmac_state_t sbmac_set_channel_state(struct sbmac_softc *sc,
1732                                              sbmac_state_t state)
1733 {
1734         sbmac_state_t oldstate = sc->sbm_state;
1735
1736         /*
1737          * If same as previous state, return
1738          */
1739
1740         if (state == oldstate) {
1741                 return oldstate;
1742         }
1743
1744         /*
1745          * If new state is ON, turn channel on
1746          */
1747
1748         if (state == sbmac_state_on) {
1749                 sbmac_channel_start(sc);
1750         }
1751         else {
1752                 sbmac_channel_stop(sc);
1753         }
1754
1755         /*
1756          * Return previous state
1757          */
1758
1759         return oldstate;
1760 }
1761
1762
1763 /**********************************************************************
1764  *  SBMAC_PROMISCUOUS_MODE(sc,onoff)
1765  *
1766  *  Turn on or off promiscuous mode
1767  *
1768  *  Input parameters:
1769  *         sc - softc
1770  *      onoff - 1 to turn on, 0 to turn off
1771  *
1772  *  Return value:
1773  *         nothing
1774  ********************************************************************* */
1775
1776 static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff)
1777 {
1778         uint64_t reg;
1779
1780         if (sc->sbm_state != sbmac_state_on)
1781                 return;
1782
1783         if (onoff) {
1784                 reg = SBMAC_READCSR(sc->sbm_rxfilter);
1785                 reg |= M_MAC_ALLPKT_EN;
1786                 SBMAC_WRITECSR(sc->sbm_rxfilter,reg);
1787         }
1788         else {
1789                 reg = SBMAC_READCSR(sc->sbm_rxfilter);
1790                 reg &= ~M_MAC_ALLPKT_EN;
1791                 SBMAC_WRITECSR(sc->sbm_rxfilter,reg);
1792         }
1793 }
1794
1795 /**********************************************************************
1796  *  SBMAC_SETIPHDR_OFFSET(sc,onoff)
1797  *
1798  *  Set the iphdr offset as 15 assuming ethernet encapsulation
1799  *
1800  *  Input parameters:
1801  *         sc - softc
1802  *
1803  *  Return value:
1804  *         nothing
1805  ********************************************************************* */
1806
1807 static void sbmac_set_iphdr_offset(struct sbmac_softc *sc)
1808 {
1809         uint64_t reg;
1810
1811         /* Hard code the off set to 15 for now */
1812         reg = SBMAC_READCSR(sc->sbm_rxfilter);
1813         reg &= ~M_MAC_IPHDR_OFFSET | V_MAC_IPHDR_OFFSET(15);
1814         SBMAC_WRITECSR(sc->sbm_rxfilter,reg);
1815
1816         /* read system identification to determine revision */
1817         if (periph_rev >= 2) {
1818                 sc->rx_hw_checksum = ENABLE;
1819         } else {
1820                 sc->rx_hw_checksum = DISABLE;
1821         }
1822 }
1823
1824
1825 /**********************************************************************
1826  *  SBMAC_ADDR2REG(ptr)
1827  *
1828  *  Convert six bytes into the 64-bit register value that
1829  *  we typically write into the SBMAC's address/mcast registers
1830  *
1831  *  Input parameters:
1832  *         ptr - pointer to 6 bytes
1833  *
1834  *  Return value:
1835  *         register value
1836  ********************************************************************* */
1837
1838 static uint64_t sbmac_addr2reg(unsigned char *ptr)
1839 {
1840         uint64_t reg = 0;
1841
1842         ptr += 6;
1843
1844         reg |= (uint64_t) *(--ptr);
1845         reg <<= 8;
1846         reg |= (uint64_t) *(--ptr);
1847         reg <<= 8;
1848         reg |= (uint64_t) *(--ptr);
1849         reg <<= 8;
1850         reg |= (uint64_t) *(--ptr);
1851         reg <<= 8;
1852         reg |= (uint64_t) *(--ptr);
1853         reg <<= 8;
1854         reg |= (uint64_t) *(--ptr);
1855
1856         return reg;
1857 }
1858
1859
1860 /**********************************************************************
1861  *  SBMAC_SET_SPEED(s,speed)
1862  *
1863  *  Configure LAN speed for the specified MAC.
1864  *  Warning: must be called when MAC is off!
1865  *
1866  *  Input parameters:
1867  *         s - sbmac structure
1868  *         speed - speed to set MAC to (see sbmac_speed_t enum)
1869  *
1870  *  Return value:
1871  *         1 if successful
1872  *      0 indicates invalid parameters
1873  ********************************************************************* */
1874
1875 static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed)
1876 {
1877         uint64_t cfg;
1878         uint64_t framecfg;
1879
1880         /*
1881          * Save new current values
1882          */
1883
1884         s->sbm_speed = speed;
1885
1886         if (s->sbm_state == sbmac_state_on)
1887                 return 0;       /* save for next restart */
1888
1889         /*
1890          * Read current register values
1891          */
1892
1893         cfg = SBMAC_READCSR(s->sbm_maccfg);
1894         framecfg = SBMAC_READCSR(s->sbm_framecfg);
1895
1896         /*
1897          * Mask out the stuff we want to change
1898          */
1899
1900         cfg &= ~(M_MAC_BURST_EN | M_MAC_SPEED_SEL);
1901         framecfg &= ~(M_MAC_IFG_RX | M_MAC_IFG_TX | M_MAC_IFG_THRSH |
1902                       M_MAC_SLOT_SIZE);
1903
1904         /*
1905          * Now add in the new bits
1906          */
1907
1908         switch (speed) {
1909         case sbmac_speed_10:
1910                 framecfg |= V_MAC_IFG_RX_10 |
1911                         V_MAC_IFG_TX_10 |
1912                         K_MAC_IFG_THRSH_10 |
1913                         V_MAC_SLOT_SIZE_10;
1914                 cfg |= V_MAC_SPEED_SEL_10MBPS;
1915                 break;
1916
1917         case sbmac_speed_100:
1918                 framecfg |= V_MAC_IFG_RX_100 |
1919                         V_MAC_IFG_TX_100 |
1920                         V_MAC_IFG_THRSH_100 |
1921                         V_MAC_SLOT_SIZE_100;
1922                 cfg |= V_MAC_SPEED_SEL_100MBPS ;
1923                 break;
1924
1925         case sbmac_speed_1000:
1926                 framecfg |= V_MAC_IFG_RX_1000 |
1927                         V_MAC_IFG_TX_1000 |
1928                         V_MAC_IFG_THRSH_1000 |
1929                         V_MAC_SLOT_SIZE_1000;
1930                 cfg |= V_MAC_SPEED_SEL_1000MBPS | M_MAC_BURST_EN;
1931                 break;
1932
1933         case sbmac_speed_auto:          /* XXX not implemented */
1934                 /* fall through */
1935         default:
1936                 return 0;
1937         }
1938
1939         /*
1940          * Send the bits back to the hardware
1941          */
1942
1943         SBMAC_WRITECSR(s->sbm_framecfg,framecfg);
1944         SBMAC_WRITECSR(s->sbm_maccfg,cfg);
1945
1946         return 1;
1947 }
1948
1949 /**********************************************************************
1950  *  SBMAC_SET_DUPLEX(s,duplex,fc)
1951  *
1952  *  Set Ethernet duplex and flow control options for this MAC
1953  *  Warning: must be called when MAC is off!
1954  *
1955  *  Input parameters:
1956  *         s - sbmac structure
1957  *         duplex - duplex setting (see sbmac_duplex_t)
1958  *         fc - flow control setting (see sbmac_fc_t)
1959  *
1960  *  Return value:
1961  *         1 if ok
1962  *         0 if an invalid parameter combination was specified
1963  ********************************************************************* */
1964
1965 static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc_t fc)
1966 {
1967         uint64_t cfg;
1968
1969         /*
1970          * Save new current values
1971          */
1972
1973         s->sbm_duplex = duplex;
1974         s->sbm_fc = fc;
1975
1976         if (s->sbm_state == sbmac_state_on)
1977                 return 0;       /* save for next restart */
1978
1979         /*
1980          * Read current register values
1981          */
1982
1983         cfg = SBMAC_READCSR(s->sbm_maccfg);
1984
1985         /*
1986          * Mask off the stuff we're about to change
1987          */
1988
1989         cfg &= ~(M_MAC_FC_SEL | M_MAC_FC_CMD | M_MAC_HDX_EN);
1990
1991
1992         switch (duplex) {
1993         case sbmac_duplex_half:
1994                 switch (fc) {
1995                 case sbmac_fc_disabled:
1996                         cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_DISABLED;
1997                         break;
1998
1999                 case sbmac_fc_collision:
2000                         cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENABLED;
2001                         break;
2002
2003                 case sbmac_fc_carrier:
2004                         cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENAB_FALSECARR;
2005                         break;
2006
2007                 case sbmac_fc_auto:             /* XXX not implemented */
2008                         /* fall through */
2009                 case sbmac_fc_frame:            /* not valid in half duplex */
2010                 default:                        /* invalid selection */
2011                         return 0;
2012                 }
2013                 break;
2014
2015         case sbmac_duplex_full:
2016                 switch (fc) {
2017                 case sbmac_fc_disabled:
2018                         cfg |= V_MAC_FC_CMD_DISABLED;
2019                         break;
2020
2021                 case sbmac_fc_frame:
2022                         cfg |= V_MAC_FC_CMD_ENABLED;
2023                         break;
2024
2025                 case sbmac_fc_collision:        /* not valid in full duplex */
2026                 case sbmac_fc_carrier:          /* not valid in full duplex */
2027                 case sbmac_fc_auto:             /* XXX not implemented */
2028                         /* fall through */
2029                 default:
2030                         return 0;
2031                 }
2032                 break;
2033         case sbmac_duplex_auto:
2034                 /* XXX not implemented */
2035                 break;
2036         }
2037
2038         /*
2039          * Send the bits back to the hardware
2040          */
2041
2042         SBMAC_WRITECSR(s->sbm_maccfg,cfg);
2043
2044         return 1;
2045 }
2046
2047
2048
2049
2050 /**********************************************************************
2051  *  SBMAC_INTR()
2052  *
2053  *  Interrupt handler for MAC interrupts
2054  *
2055  *  Input parameters:
2056  *         MAC structure
2057  *
2058  *  Return value:
2059  *         nothing
2060  ********************************************************************* */
2061 static irqreturn_t sbmac_intr(int irq,void *dev_instance,struct pt_regs *rgs)
2062 {
2063         struct net_device *dev = (struct net_device *) dev_instance;
2064         struct sbmac_softc *sc = netdev_priv(dev);
2065         uint64_t isr;
2066         int handled = 0;
2067
2068         for (;;) {
2069
2070                 /*
2071                  * Read the ISR (this clears the bits in the real
2072                  * register, except for counter addr)
2073                  */
2074
2075                 isr = SBMAC_READCSR(sc->sbm_isr) & ~M_MAC_COUNTER_ADDR;
2076
2077                 if (isr == 0)
2078                         break;
2079
2080                 handled = 1;
2081
2082                 /*
2083                  * Transmits on channel 0
2084                  */
2085
2086                 if (isr & (M_MAC_INT_CHANNEL << S_MAC_TX_CH0)) {
2087                         sbdma_tx_process(sc,&(sc->sbm_txdma));
2088                 }
2089
2090                 /*
2091                  * Receives on channel 0
2092                  */
2093
2094                 /*
2095                  * It's important to test all the bits (or at least the
2096                  * EOP_SEEN bit) when deciding to do the RX process
2097                  * particularly when coalescing, to make sure we
2098                  * take care of the following:
2099                  *
2100                  * If you have some packets waiting (have been received
2101                  * but no interrupt) and get a TX interrupt before
2102                  * the RX timer or counter expires, reading the ISR
2103                  * above will clear the timer and counter, and you
2104                  * won't get another interrupt until a packet shows
2105                  * up to start the timer again.  Testing
2106                  * EOP_SEEN here takes care of this case.
2107                  * (EOP_SEEN is part of M_MAC_INT_CHANNEL << S_MAC_RX_CH0)
2108                  */
2109
2110
2111                 if (isr & (M_MAC_INT_CHANNEL << S_MAC_RX_CH0)) {
2112                         sbdma_rx_process(sc,&(sc->sbm_rxdma));
2113                 }
2114         }
2115         return IRQ_RETVAL(handled);
2116 }
2117
2118
2119 /**********************************************************************
2120  *  SBMAC_START_TX(skb,dev)
2121  *
2122  *  Start output on the specified interface.  Basically, we
2123  *  queue as many buffers as we can until the ring fills up, or
2124  *  we run off the end of the queue, whichever comes first.
2125  *
2126  *  Input parameters:
2127  *
2128  *
2129  *  Return value:
2130  *         nothing
2131  ********************************************************************* */
2132 static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev)
2133 {
2134         struct sbmac_softc *sc = netdev_priv(dev);
2135
2136         /* lock eth irq */
2137         spin_lock_irq (&sc->sbm_lock);
2138
2139         /*
2140          * Put the buffer on the transmit ring.  If we
2141          * don't have room, stop the queue.
2142          */
2143
2144         if (sbdma_add_txbuffer(&(sc->sbm_txdma),skb)) {
2145                 /* XXX save skb that we could not send */
2146                 netif_stop_queue(dev);
2147                 spin_unlock_irq(&sc->sbm_lock);
2148
2149                 return 1;
2150         }
2151
2152         dev->trans_start = jiffies;
2153
2154         spin_unlock_irq (&sc->sbm_lock);
2155
2156         return 0;
2157 }
2158
2159 /**********************************************************************
2160  *  SBMAC_SETMULTI(sc)
2161  *
2162  *  Reprogram the multicast table into the hardware, given
2163  *  the list of multicasts associated with the interface
2164  *  structure.
2165  *
2166  *  Input parameters:
2167  *         sc - softc
2168  *
2169  *  Return value:
2170  *         nothing
2171  ********************************************************************* */
2172
2173 static void sbmac_setmulti(struct sbmac_softc *sc)
2174 {
2175         uint64_t reg;
2176         sbmac_port_t port;
2177         int idx;
2178         struct dev_mc_list *mclist;
2179         struct net_device *dev = sc->sbm_dev;
2180
2181         /*
2182          * Clear out entire multicast table.  We do this by nuking
2183          * the entire hash table and all the direct matches except
2184          * the first one, which is used for our station address
2185          */
2186
2187         for (idx = 1; idx < MAC_ADDR_COUNT; idx++) {
2188                 port = sc->sbm_base + R_MAC_ADDR_BASE+(idx*sizeof(uint64_t));
2189                 SBMAC_WRITECSR(port,0);
2190         }
2191
2192         for (idx = 0; idx < MAC_HASH_COUNT; idx++) {
2193                 port = sc->sbm_base + R_MAC_HASH_BASE+(idx*sizeof(uint64_t));
2194                 SBMAC_WRITECSR(port,0);
2195         }
2196
2197         /*
2198          * Clear the filter to say we don't want any multicasts.
2199          */
2200
2201         reg = SBMAC_READCSR(sc->sbm_rxfilter);
2202         reg &= ~(M_MAC_MCAST_INV | M_MAC_MCAST_EN);
2203         SBMAC_WRITECSR(sc->sbm_rxfilter,reg);
2204
2205         if (dev->flags & IFF_ALLMULTI) {
2206                 /*
2207                  * Enable ALL multicasts.  Do this by inverting the
2208                  * multicast enable bit.
2209                  */
2210                 reg = SBMAC_READCSR(sc->sbm_rxfilter);
2211                 reg |= (M_MAC_MCAST_INV | M_MAC_MCAST_EN);
2212                 SBMAC_WRITECSR(sc->sbm_rxfilter,reg);
2213                 return;
2214         }
2215
2216
2217         /*
2218          * Progam new multicast entries.  For now, only use the
2219          * perfect filter.  In the future we'll need to use the
2220          * hash filter if the perfect filter overflows
2221          */
2222
2223         /* XXX only using perfect filter for now, need to use hash
2224          * XXX if the table overflows */
2225
2226         idx = 1;                /* skip station address */
2227         mclist = dev->mc_list;
2228         while (mclist && (idx < MAC_ADDR_COUNT)) {
2229                 reg = sbmac_addr2reg(mclist->dmi_addr);
2230                 port = sc->sbm_base + R_MAC_ADDR_BASE+(idx * sizeof(uint64_t));
2231                 SBMAC_WRITECSR(port,reg);
2232                 idx++;
2233                 mclist = mclist->next;
2234         }
2235
2236         /*
2237          * Enable the "accept multicast bits" if we programmed at least one
2238          * multicast.
2239          */
2240
2241         if (idx > 1) {
2242                 reg = SBMAC_READCSR(sc->sbm_rxfilter);
2243                 reg |= M_MAC_MCAST_EN;
2244                 SBMAC_WRITECSR(sc->sbm_rxfilter,reg);
2245         }
2246 }
2247
2248
2249
2250 #if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR)
2251 /**********************************************************************
2252  *  SBMAC_PARSE_XDIGIT(str)
2253  *
2254  *  Parse a hex digit, returning its value
2255  *
2256  *  Input parameters:
2257  *         str - character
2258  *
2259  *  Return value:
2260  *         hex value, or -1 if invalid
2261  ********************************************************************* */
2262
2263 static int sbmac_parse_xdigit(char str)
2264 {
2265         int digit;
2266
2267         if ((str >= '0') && (str <= '9'))
2268                 digit = str - '0';
2269         else if ((str >= 'a') && (str <= 'f'))
2270                 digit = str - 'a' + 10;
2271         else if ((str >= 'A') && (str <= 'F'))
2272                 digit = str - 'A' + 10;
2273         else
2274                 return -1;
2275
2276         return digit;
2277 }
2278
2279 /**********************************************************************
2280  *  SBMAC_PARSE_HWADDR(str,hwaddr)
2281  *
2282  *  Convert a string in the form xx:xx:xx:xx:xx:xx into a 6-byte
2283  *  Ethernet address.
2284  *
2285  *  Input parameters:
2286  *         str - string
2287  *         hwaddr - pointer to hardware address
2288  *
2289  *  Return value:
2290  *         0 if ok, else -1
2291  ********************************************************************* */
2292
2293 static int sbmac_parse_hwaddr(char *str, unsigned char *hwaddr)
2294 {
2295         int digit1,digit2;
2296         int idx = 6;
2297
2298         while (*str && (idx > 0)) {
2299                 digit1 = sbmac_parse_xdigit(*str);
2300                 if (digit1 < 0)
2301                         return -1;
2302                 str++;
2303                 if (!*str)
2304                         return -1;
2305
2306                 if ((*str == ':') || (*str == '-')) {
2307                         digit2 = digit1;
2308                         digit1 = 0;
2309                 }
2310                 else {
2311                         digit2 = sbmac_parse_xdigit(*str);
2312                         if (digit2 < 0)
2313                                 return -1;
2314                         str++;
2315                 }
2316
2317                 *hwaddr++ = (digit1 << 4) | digit2;
2318                 idx--;
2319
2320                 if (*str == '-')
2321                         str++;
2322                 if (*str == ':')
2323                         str++;
2324         }
2325         return 0;
2326 }
2327 #endif
2328
2329 static int sb1250_change_mtu(struct net_device *_dev, int new_mtu)
2330 {
2331         if (new_mtu >  ENET_PACKET_SIZE)
2332                 return -EINVAL;
2333         _dev->mtu = new_mtu;
2334         printk(KERN_INFO "changing the mtu to %d\n", new_mtu);
2335         return 0;
2336 }
2337
2338 /**********************************************************************
2339  *  SBMAC_INIT(dev)
2340  *
2341  *  Attach routine - init hardware and hook ourselves into linux
2342  *
2343  *  Input parameters:
2344  *         dev - net_device structure
2345  *
2346  *  Return value:
2347  *         status
2348  ********************************************************************* */
2349
2350 static int sbmac_init(struct net_device *dev, int idx)
2351 {
2352         struct sbmac_softc *sc;
2353         unsigned char *eaddr;
2354         uint64_t ea_reg;
2355         int i;
2356         int err;
2357
2358         sc = netdev_priv(dev);
2359
2360         /* Determine controller base address */
2361
2362         sc->sbm_base = IOADDR(dev->base_addr);
2363         sc->sbm_dev = dev;
2364         sc->sbe_idx = idx;
2365
2366         eaddr = sc->sbm_hwaddr;
2367
2368         /*
2369          * Read the ethernet address.  The firwmare left this programmed
2370          * for us in the ethernet address register for each mac.
2371          */
2372
2373         ea_reg = SBMAC_READCSR(sc->sbm_base + R_MAC_ETHERNET_ADDR);
2374         SBMAC_WRITECSR(sc->sbm_base + R_MAC_ETHERNET_ADDR, 0);
2375         for (i = 0; i < 6; i++) {
2376                 eaddr[i] = (uint8_t) (ea_reg & 0xFF);
2377                 ea_reg >>= 8;
2378         }
2379
2380         for (i = 0; i < 6; i++) {
2381                 dev->dev_addr[i] = eaddr[i];
2382         }
2383
2384
2385         /*
2386          * Init packet size
2387          */
2388
2389         sc->sbm_buffersize = ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN;
2390
2391         /*
2392          * Initialize context (get pointers to registers and stuff), then
2393          * allocate the memory for the descriptor tables.
2394          */
2395
2396         sbmac_initctx(sc);
2397
2398         /*
2399          * Set up Linux device callins
2400          */
2401
2402         spin_lock_init(&(sc->sbm_lock));
2403
2404         dev->open               = sbmac_open;
2405         dev->hard_start_xmit    = sbmac_start_tx;
2406         dev->stop               = sbmac_close;
2407         dev->get_stats          = sbmac_get_stats;
2408         dev->set_multicast_list = sbmac_set_rx_mode;
2409         dev->do_ioctl           = sbmac_mii_ioctl;
2410         dev->tx_timeout         = sbmac_tx_timeout;
2411         dev->watchdog_timeo     = TX_TIMEOUT;
2412
2413         dev->change_mtu         = sb1250_change_mtu;
2414
2415         /* This is needed for PASS2 for Rx H/W checksum feature */
2416         sbmac_set_iphdr_offset(sc);
2417
2418         err = register_netdev(dev);
2419         if (err)
2420                 goto out_uninit;
2421
2422         if (periph_rev >= 2) {
2423                 printk(KERN_INFO "%s: enabling TCP rcv checksum\n",
2424                         sc->sbm_dev->name);
2425         }
2426
2427         /*
2428          * Display Ethernet address (this is called during the config
2429          * process so we need to finish off the config message that
2430          * was being displayed)
2431          */
2432         printk(KERN_INFO
2433                "%s: SiByte Ethernet at 0x%08lX, address: %02X:%02X:%02X:%02X:%02X:%02X\n",
2434                dev->name, dev->base_addr,
2435                eaddr[0],eaddr[1],eaddr[2],eaddr[3],eaddr[4],eaddr[5]);
2436
2437
2438         return 0;
2439
2440 out_uninit:
2441         sbmac_uninitctx(sc);
2442
2443         return err;
2444 }
2445
2446
2447 static int sbmac_open(struct net_device *dev)
2448 {
2449         struct sbmac_softc *sc = netdev_priv(dev);
2450
2451         if (debug > 1) {
2452                 printk(KERN_DEBUG "%s: sbmac_open() irq %d.\n", dev->name, dev->irq);
2453         }
2454
2455         /*
2456          * map/route interrupt (clear status first, in case something
2457          * weird is pending; we haven't initialized the mac registers
2458          * yet)
2459          */
2460
2461         SBMAC_READCSR(sc->sbm_isr);
2462         if (request_irq(dev->irq, &sbmac_intr, SA_SHIRQ, dev->name, dev))
2463                 return -EBUSY;
2464
2465         /*
2466          * Configure default speed
2467          */
2468
2469         sbmac_mii_poll(sc,noisy_mii);
2470
2471         /*
2472          * Turn on the channel
2473          */
2474
2475         sbmac_set_channel_state(sc,sbmac_state_on);
2476
2477         /*
2478          * XXX Station address is in dev->dev_addr
2479          */
2480
2481         if (dev->if_port == 0)
2482                 dev->if_port = 0;
2483
2484         netif_start_queue(dev);
2485
2486         sbmac_set_rx_mode(dev);
2487
2488         /* Set the timer to check for link beat. */
2489         init_timer(&sc->sbm_timer);
2490         sc->sbm_timer.expires = jiffies + 2 * HZ/100;
2491         sc->sbm_timer.data = (unsigned long)dev;
2492         sc->sbm_timer.function = &sbmac_timer;
2493         add_timer(&sc->sbm_timer);
2494
2495         return 0;
2496 }
2497
2498
2499
2500 static int sbmac_mii_poll(struct sbmac_softc *s,int noisy)
2501 {
2502     int bmsr,bmcr,k1stsr,anlpar;
2503     int chg;
2504     char buffer[100];
2505     char *p = buffer;
2506
2507     /* Read the mode status and mode control registers. */
2508     bmsr = sbmac_mii_read(s,s->sbm_phys[0],MII_BMSR);
2509     bmcr = sbmac_mii_read(s,s->sbm_phys[0],MII_BMCR);
2510
2511     /* get the link partner status */
2512     anlpar = sbmac_mii_read(s,s->sbm_phys[0],MII_ANLPAR);
2513
2514     /* if supported, read the 1000baseT register */
2515     if (bmsr & BMSR_1000BT_XSR) {
2516         k1stsr = sbmac_mii_read(s,s->sbm_phys[0],MII_K1STSR);
2517         }
2518     else {
2519         k1stsr = 0;
2520         }
2521
2522     chg = 0;
2523
2524     if ((bmsr & BMSR_LINKSTAT) == 0) {
2525         /*
2526          * If link status is down, clear out old info so that when
2527          * it comes back up it will force us to reconfigure speed
2528          */
2529         s->sbm_phy_oldbmsr = 0;
2530         s->sbm_phy_oldanlpar = 0;
2531         s->sbm_phy_oldk1stsr = 0;
2532         return 0;
2533         }
2534
2535     if ((s->sbm_phy_oldbmsr != bmsr) ||
2536         (s->sbm_phy_oldanlpar != anlpar) ||
2537         (s->sbm_phy_oldk1stsr != k1stsr)) {
2538         if (debug > 1) {
2539             printk(KERN_DEBUG "%s: bmsr:%x/%x anlpar:%x/%x  k1stsr:%x/%x\n",
2540                s->sbm_dev->name,
2541                s->sbm_phy_oldbmsr,bmsr,
2542                s->sbm_phy_oldanlpar,anlpar,
2543                s->sbm_phy_oldk1stsr,k1stsr);
2544             }
2545         s->sbm_phy_oldbmsr = bmsr;
2546         s->sbm_phy_oldanlpar = anlpar;
2547         s->sbm_phy_oldk1stsr = k1stsr;
2548         chg = 1;
2549         }
2550
2551     if (chg == 0)
2552             return 0;
2553
2554     p += sprintf(p,"Link speed: ");
2555
2556     if (k1stsr & K1STSR_LP1KFD) {
2557         s->sbm_speed = sbmac_speed_1000;
2558         s->sbm_duplex = sbmac_duplex_full;
2559         s->sbm_fc = sbmac_fc_frame;
2560         p += sprintf(p,"1000BaseT FDX");
2561         }
2562     else if (k1stsr & K1STSR_LP1KHD) {
2563         s->sbm_speed = sbmac_speed_1000;
2564         s->sbm_duplex = sbmac_duplex_half;
2565         s->sbm_fc = sbmac_fc_disabled;
2566         p += sprintf(p,"1000BaseT HDX");
2567         }
2568     else if (anlpar & ANLPAR_TXFD) {
2569         s->sbm_speed = sbmac_speed_100;
2570         s->sbm_duplex = sbmac_duplex_full;
2571         s->sbm_fc = (anlpar & ANLPAR_PAUSE) ? sbmac_fc_frame : sbmac_fc_disabled;
2572         p += sprintf(p,"100BaseT FDX");
2573         }
2574     else if (anlpar & ANLPAR_TXHD) {
2575         s->sbm_speed = sbmac_speed_100;
2576         s->sbm_duplex = sbmac_duplex_half;
2577         s->sbm_fc = sbmac_fc_disabled;
2578         p += sprintf(p,"100BaseT HDX");
2579         }
2580     else if (anlpar & ANLPAR_10FD) {
2581         s->sbm_speed = sbmac_speed_10;
2582         s->sbm_duplex = sbmac_duplex_full;
2583         s->sbm_fc = sbmac_fc_frame;
2584         p += sprintf(p,"10BaseT FDX");
2585         }
2586     else if (anlpar & ANLPAR_10HD) {
2587         s->sbm_speed = sbmac_speed_10;
2588         s->sbm_duplex = sbmac_duplex_half;
2589         s->sbm_fc = sbmac_fc_collision;
2590         p += sprintf(p,"10BaseT HDX");
2591         }
2592     else {
2593         p += sprintf(p,"Unknown");
2594         }
2595
2596     if (noisy) {
2597             printk(KERN_INFO "%s: %s\n",s->sbm_dev->name,buffer);
2598             }
2599
2600     return 1;
2601 }
2602
2603
2604 static void sbmac_timer(unsigned long data)
2605 {
2606         struct net_device *dev = (struct net_device *)data;
2607         struct sbmac_softc *sc = netdev_priv(dev);
2608         int next_tick = HZ;
2609         int mii_status;
2610
2611         spin_lock_irq (&sc->sbm_lock);
2612
2613         /* make IFF_RUNNING follow the MII status bit "Link established" */
2614         mii_status = sbmac_mii_read(sc, sc->sbm_phys[0], MII_BMSR);
2615
2616         if ( (mii_status & BMSR_LINKSTAT) != (sc->sbm_phy_oldlinkstat) ) {
2617                 sc->sbm_phy_oldlinkstat = mii_status & BMSR_LINKSTAT;
2618                 if (mii_status & BMSR_LINKSTAT) {
2619                         netif_carrier_on(dev);
2620                 }
2621                 else {
2622                         netif_carrier_off(dev);
2623                 }
2624         }
2625
2626         /*
2627          * Poll the PHY to see what speed we should be running at
2628          */
2629
2630         if (sbmac_mii_poll(sc,noisy_mii)) {
2631                 if (sc->sbm_state != sbmac_state_off) {
2632                         /*
2633                          * something changed, restart the channel
2634                          */
2635                         if (debug > 1) {
2636                                 printk("%s: restarting channel because speed changed\n",
2637                                        sc->sbm_dev->name);
2638                         }
2639                         sbmac_channel_stop(sc);
2640                         sbmac_channel_start(sc);
2641                 }
2642         }
2643
2644         spin_unlock_irq (&sc->sbm_lock);
2645
2646         sc->sbm_timer.expires = jiffies + next_tick;
2647         add_timer(&sc->sbm_timer);
2648 }
2649
2650
2651 static void sbmac_tx_timeout (struct net_device *dev)
2652 {
2653         struct sbmac_softc *sc = netdev_priv(dev);
2654
2655         spin_lock_irq (&sc->sbm_lock);
2656
2657
2658         dev->trans_start = jiffies;
2659         sc->sbm_stats.tx_errors++;
2660
2661         spin_unlock_irq (&sc->sbm_lock);
2662
2663         printk (KERN_WARNING "%s: Transmit timed out\n",dev->name);
2664 }
2665
2666
2667
2668
2669 static struct net_device_stats *sbmac_get_stats(struct net_device *dev)
2670 {
2671         struct sbmac_softc *sc = netdev_priv(dev);
2672         unsigned long flags;
2673
2674         spin_lock_irqsave(&sc->sbm_lock, flags);
2675
2676         /* XXX update other stats here */
2677
2678         spin_unlock_irqrestore(&sc->sbm_lock, flags);
2679
2680         return &sc->sbm_stats;
2681 }
2682
2683
2684
2685 static void sbmac_set_rx_mode(struct net_device *dev)
2686 {
2687         unsigned long flags;
2688         int msg_flag = 0;
2689         struct sbmac_softc *sc = netdev_priv(dev);
2690
2691         spin_lock_irqsave(&sc->sbm_lock, flags);
2692         if ((dev->flags ^ sc->sbm_devflags) & IFF_PROMISC) {
2693                 /*
2694                  * Promiscuous changed.
2695                  */
2696
2697                 if (dev->flags & IFF_PROMISC) {
2698                         /* Unconditionally log net taps. */
2699                         msg_flag = 1;
2700                         sbmac_promiscuous_mode(sc,1);
2701                 }
2702                 else {
2703                         msg_flag = 2;
2704                         sbmac_promiscuous_mode(sc,0);
2705                 }
2706         }
2707         spin_unlock_irqrestore(&sc->sbm_lock, flags);
2708
2709         if (msg_flag) {
2710                 printk(KERN_NOTICE "%s: Promiscuous mode %sabled.\n",
2711                        dev->name,(msg_flag==1)?"en":"dis");
2712         }
2713
2714         /*
2715          * Program the multicasts.  Do this every time.
2716          */
2717
2718         sbmac_setmulti(sc);
2719
2720 }
2721
2722 static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2723 {
2724         struct sbmac_softc *sc = netdev_priv(dev);
2725         u16 *data = (u16 *)&rq->ifr_ifru;
2726         unsigned long flags;
2727         int retval;
2728
2729         spin_lock_irqsave(&sc->sbm_lock, flags);
2730         retval = 0;
2731
2732         switch(cmd) {
2733         case SIOCDEVPRIVATE:            /* Get the address of the PHY in use. */
2734                 data[0] = sc->sbm_phys[0] & 0x1f;
2735                 /* Fall Through */
2736         case SIOCDEVPRIVATE+1:          /* Read the specified MII register. */
2737                 data[3] = sbmac_mii_read(sc, data[0] & 0x1f, data[1] & 0x1f);
2738                 break;
2739         case SIOCDEVPRIVATE+2:          /* Write the specified MII register */
2740                 if (!capable(CAP_NET_ADMIN)) {
2741                         retval = -EPERM;
2742                         break;
2743                 }
2744                 if (debug > 1) {
2745                     printk(KERN_DEBUG "%s: sbmac_mii_ioctl: write %02X %02X %02X\n",dev->name,
2746                        data[0],data[1],data[2]);
2747                     }
2748                 sbmac_mii_write(sc, data[0] & 0x1f, data[1] & 0x1f, data[2]);
2749                 break;
2750         default:
2751                 retval = -EOPNOTSUPP;
2752         }
2753
2754         spin_unlock_irqrestore(&sc->sbm_lock, flags);
2755         return retval;
2756 }
2757
2758 static int sbmac_close(struct net_device *dev)
2759 {
2760         struct sbmac_softc *sc = netdev_priv(dev);
2761         unsigned long flags;
2762         int irq;
2763
2764         sbmac_set_channel_state(sc,sbmac_state_off);
2765
2766         del_timer_sync(&sc->sbm_timer);
2767
2768         spin_lock_irqsave(&sc->sbm_lock, flags);
2769
2770         netif_stop_queue(dev);
2771
2772         if (debug > 1) {
2773                 printk(KERN_DEBUG "%s: Shutting down ethercard\n",dev->name);
2774         }
2775
2776         spin_unlock_irqrestore(&sc->sbm_lock, flags);
2777
2778         irq = dev->irq;
2779         synchronize_irq(irq);
2780         free_irq(irq, dev);
2781
2782         sbdma_emptyring(&(sc->sbm_txdma));
2783         sbdma_emptyring(&(sc->sbm_rxdma));
2784
2785         return 0;
2786 }
2787
2788
2789
2790 #if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR)
2791 static void
2792 sbmac_setup_hwaddr(int chan,char *addr)
2793 {
2794         uint8_t eaddr[6];
2795         uint64_t val;
2796         sbmac_port_t port;
2797
2798         port = A_MAC_CHANNEL_BASE(chan);
2799         sbmac_parse_hwaddr(addr,eaddr);
2800         val = sbmac_addr2reg(eaddr);
2801         SBMAC_WRITECSR(IOADDR(port+R_MAC_ETHERNET_ADDR),val);
2802         val = SBMAC_READCSR(IOADDR(port+R_MAC_ETHERNET_ADDR));
2803 }
2804 #endif
2805
2806 static struct net_device *dev_sbmac[MAX_UNITS];
2807
2808 static int __init
2809 sbmac_init_module(void)
2810 {
2811         int idx;
2812         struct net_device *dev;
2813         sbmac_port_t port;
2814         int chip_max_units;
2815
2816         /*
2817          * For bringup when not using the firmware, we can pre-fill
2818          * the MAC addresses using the environment variables
2819          * specified in this file (or maybe from the config file?)
2820          */
2821 #ifdef SBMAC_ETH0_HWADDR
2822         sbmac_setup_hwaddr(0,SBMAC_ETH0_HWADDR);
2823 #endif
2824 #ifdef SBMAC_ETH1_HWADDR
2825         sbmac_setup_hwaddr(1,SBMAC_ETH1_HWADDR);
2826 #endif
2827 #ifdef SBMAC_ETH2_HWADDR
2828         sbmac_setup_hwaddr(2,SBMAC_ETH2_HWADDR);
2829 #endif
2830
2831         /*
2832          * Walk through the Ethernet controllers and find
2833          * those who have their MAC addresses set.
2834          */
2835         switch (soc_type) {
2836         case K_SYS_SOC_TYPE_BCM1250:
2837         case K_SYS_SOC_TYPE_BCM1250_ALT:
2838                 chip_max_units = 3;
2839                 break;
2840         case K_SYS_SOC_TYPE_BCM1120:
2841         case K_SYS_SOC_TYPE_BCM1125:
2842         case K_SYS_SOC_TYPE_BCM1125H:
2843         case K_SYS_SOC_TYPE_BCM1250_ALT2: /* Hybrid */
2844                 chip_max_units = 2;
2845                 break;
2846         default:
2847                 chip_max_units = 0;
2848                 break;
2849         }
2850         if (chip_max_units > MAX_UNITS)
2851                 chip_max_units = MAX_UNITS;
2852
2853         for (idx = 0; idx < chip_max_units; idx++) {
2854
2855                 /*
2856                  * This is the base address of the MAC.
2857                  */
2858
2859                 port = A_MAC_CHANNEL_BASE(idx);
2860
2861                 /*
2862                  * The R_MAC_ETHERNET_ADDR register will be set to some nonzero
2863                  * value for us by the firmware if we're going to use this MAC.
2864                  * If we find a zero, skip this MAC.
2865                  */
2866
2867                 sbmac_orig_hwaddr[idx] = SBMAC_READCSR(IOADDR(port+R_MAC_ETHERNET_ADDR));
2868                 if (sbmac_orig_hwaddr[idx] == 0) {
2869                         printk(KERN_DEBUG "sbmac: not configuring MAC at "
2870                                "%lx\n", port);
2871                     continue;
2872                 }
2873
2874                 /*
2875                  * Okay, cool.  Initialize this MAC.
2876                  */
2877
2878                 dev = alloc_etherdev(sizeof(struct sbmac_softc));
2879                 if (!dev)
2880                         return -ENOMEM; /* return ENOMEM */
2881
2882                 printk(KERN_DEBUG "sbmac: configuring MAC at %lx\n", port);
2883
2884                 dev->irq = K_INT_MAC_0 + idx;
2885                 dev->base_addr = port;
2886                 dev->mem_end = 0;
2887                 if (sbmac_init(dev, idx)) {
2888                         port = A_MAC_CHANNEL_BASE(idx);
2889                         SBMAC_WRITECSR(IOADDR(port+R_MAC_ETHERNET_ADDR),
2890                                        sbmac_orig_hwaddr[idx]);
2891                         free_netdev(dev);
2892                         continue;
2893                 }
2894                 dev_sbmac[idx] = dev;
2895         }
2896         return 0;
2897 }
2898
2899
2900 static void __exit
2901 sbmac_cleanup_module(void)
2902 {
2903         struct net_device *dev;
2904         int idx;
2905
2906         for (idx = 0; idx < MAX_UNITS; idx++) {
2907                 struct sbmac_softc *sc;
2908                 dev = dev_sbmac[idx];
2909                 if (!dev)
2910                         continue;
2911
2912                 sc = netdev_priv(dev);
2913                 unregister_netdev(dev);
2914                 sbmac_uninitctx(sc);
2915                 free_netdev(dev);
2916         }
2917 }
2918
2919 module_init(sbmac_init_module);
2920 module_exit(sbmac_cleanup_module);