2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2005 QLogic Corporation
5 * See LICENSE.qla2xxx for copyright and licensing details.
9 #include <linux/moduleparam.h>
10 #include <linux/vmalloc.h>
11 #include <linux/delay.h>
12 #include <linux/kthread.h>
14 #include <scsi/scsi_tcq.h>
15 #include <scsi/scsicam.h>
16 #include <scsi/scsi_transport.h>
17 #include <scsi/scsi_transport_fc.h>
22 char qla2x00_version_str[40];
25 * SRB allocation cache
27 static kmem_cache_t *srb_cachep;
30 * Ioctl related information.
34 int ql2xlogintimeout = 20;
35 module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR);
36 MODULE_PARM_DESC(ql2xlogintimeout,
37 "Login timeout value in seconds.");
39 int qlport_down_retry = 30;
40 module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR);
41 MODULE_PARM_DESC(qlport_down_retry,
42 "Maximum number of command retries to a port that returns "
43 "a PORT-DOWN status.");
45 int ql2xplogiabsentdevice;
46 module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR);
47 MODULE_PARM_DESC(ql2xplogiabsentdevice,
48 "Option to enable PLOGI to devices that are not present after "
49 "a Fabric scan. This is needed for several broken switches. "
50 "Default is 0 - no PLOGI. 1 - perfom PLOGI.");
52 int ql2xloginretrycount = 0;
53 module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR);
54 MODULE_PARM_DESC(ql2xloginretrycount,
55 "Specify an alternate value for the NVRAM login retry count.");
57 int ql2xallocfwdump = 1;
58 module_param(ql2xallocfwdump, int, S_IRUGO|S_IRUSR);
59 MODULE_PARM_DESC(ql2xallocfwdump,
60 "Option to enable allocation of memory for a firmware dump "
61 "during HBA initialization. Memory allocation requirements "
62 "vary by ISP type. Default is 1 - allocate memory.");
64 int extended_error_logging;
65 module_param(extended_error_logging, int, S_IRUGO|S_IRUSR);
66 MODULE_PARM_DESC(extended_error_logging,
67 "Option to enable extended error logging, "
68 "Default is 0 - no logging. 1 - log errors.");
70 static void qla2x00_free_device(scsi_qla_host_t *);
72 static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
75 module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
76 MODULE_PARM_DESC(ql2xfdmienable,
77 "Enables FDMI registratons "
78 "Default is 0 - no FDMI. 1 - perfom FDMI.");
81 * SCSI host template entry points
83 static int qla2xxx_slave_configure(struct scsi_device * device);
84 static int qla2xxx_slave_alloc(struct scsi_device *);
85 static void qla2xxx_slave_destroy(struct scsi_device *);
86 static int qla2x00_queuecommand(struct scsi_cmnd *cmd,
87 void (*fn)(struct scsi_cmnd *));
88 static int qla24xx_queuecommand(struct scsi_cmnd *cmd,
89 void (*fn)(struct scsi_cmnd *));
90 static int qla2xxx_eh_abort(struct scsi_cmnd *);
91 static int qla2xxx_eh_device_reset(struct scsi_cmnd *);
92 static int qla2xxx_eh_bus_reset(struct scsi_cmnd *);
93 static int qla2xxx_eh_host_reset(struct scsi_cmnd *);
94 static int qla2x00_loop_reset(scsi_qla_host_t *ha);
95 static int qla2x00_device_reset(scsi_qla_host_t *, fc_port_t *);
97 static int qla2x00_change_queue_depth(struct scsi_device *, int);
98 static int qla2x00_change_queue_type(struct scsi_device *, int);
100 static struct scsi_host_template qla2x00_driver_template = {
101 .module = THIS_MODULE,
102 .name = QLA2XXX_DRIVER_NAME,
103 .queuecommand = qla2x00_queuecommand,
105 .eh_abort_handler = qla2xxx_eh_abort,
106 .eh_device_reset_handler = qla2xxx_eh_device_reset,
107 .eh_bus_reset_handler = qla2xxx_eh_bus_reset,
108 .eh_host_reset_handler = qla2xxx_eh_host_reset,
110 .slave_configure = qla2xxx_slave_configure,
112 .slave_alloc = qla2xxx_slave_alloc,
113 .slave_destroy = qla2xxx_slave_destroy,
114 .change_queue_depth = qla2x00_change_queue_depth,
115 .change_queue_type = qla2x00_change_queue_type,
118 .use_clustering = ENABLE_CLUSTERING,
119 .sg_tablesize = SG_ALL,
122 * The RISC allows for each command to transfer (2^32-1) bytes of data,
123 * which equates to 0x800000 sectors.
125 .max_sectors = 0xFFFF,
126 .shost_attrs = qla2x00_host_attrs,
129 static struct scsi_host_template qla24xx_driver_template = {
130 .module = THIS_MODULE,
131 .name = QLA2XXX_DRIVER_NAME,
132 .queuecommand = qla24xx_queuecommand,
134 .eh_abort_handler = qla2xxx_eh_abort,
135 .eh_device_reset_handler = qla2xxx_eh_device_reset,
136 .eh_bus_reset_handler = qla2xxx_eh_bus_reset,
137 .eh_host_reset_handler = qla2xxx_eh_host_reset,
139 .slave_configure = qla2xxx_slave_configure,
141 .slave_alloc = qla2xxx_slave_alloc,
142 .slave_destroy = qla2xxx_slave_destroy,
143 .change_queue_depth = qla2x00_change_queue_depth,
144 .change_queue_type = qla2x00_change_queue_type,
147 .use_clustering = ENABLE_CLUSTERING,
148 .sg_tablesize = SG_ALL,
150 .max_sectors = 0xFFFF,
151 .shost_attrs = qla2x00_host_attrs,
154 static struct scsi_transport_template *qla2xxx_transport_template = NULL;
156 /* TODO Convert to inlines
160 #define WATCH_INTERVAL 1 /* number of seconds */
162 static void qla2x00_timer(scsi_qla_host_t *);
164 static __inline__ void qla2x00_start_timer(scsi_qla_host_t *,
165 void *, unsigned long);
166 static __inline__ void qla2x00_restart_timer(scsi_qla_host_t *, unsigned long);
167 static __inline__ void qla2x00_stop_timer(scsi_qla_host_t *);
170 qla2x00_start_timer(scsi_qla_host_t *ha, void *func, unsigned long interval)
172 init_timer(&ha->timer);
173 ha->timer.expires = jiffies + interval * HZ;
174 ha->timer.data = (unsigned long)ha;
175 ha->timer.function = (void (*)(unsigned long))func;
176 add_timer(&ha->timer);
177 ha->timer_active = 1;
181 qla2x00_restart_timer(scsi_qla_host_t *ha, unsigned long interval)
183 mod_timer(&ha->timer, jiffies + interval * HZ);
186 static __inline__ void
187 qla2x00_stop_timer(scsi_qla_host_t *ha)
189 del_timer_sync(&ha->timer);
190 ha->timer_active = 0;
193 static int qla2x00_do_dpc(void *data);
195 static void qla2x00_rst_aen(scsi_qla_host_t *);
197 static uint8_t qla2x00_mem_alloc(scsi_qla_host_t *);
198 static void qla2x00_mem_free(scsi_qla_host_t *ha);
199 static int qla2x00_allocate_sp_pool( scsi_qla_host_t *ha);
200 static void qla2x00_free_sp_pool(scsi_qla_host_t *ha);
201 static void qla2x00_sp_free_dma(scsi_qla_host_t *, srb_t *);
202 void qla2x00_sp_compl(scsi_qla_host_t *ha, srb_t *);
204 /* -------------------------------------------------------------------------- */
207 qla2x00_pci_info_str(struct scsi_qla_host *ha, char *str)
209 static char *pci_bus_modes[] = {
210 "33", "66", "100", "133",
215 pci_bus = (ha->pci_attr & (BIT_9 | BIT_10)) >> 9;
218 strcat(str, pci_bus_modes[pci_bus]);
220 pci_bus = (ha->pci_attr & BIT_8) >> 8;
222 strcat(str, pci_bus_modes[pci_bus]);
224 strcat(str, " MHz)");
230 qla24xx_pci_info_str(struct scsi_qla_host *ha, char *str)
232 static char *pci_bus_modes[] = { "33", "66", "100", "133", };
236 pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
239 uint16_t pcie_lstat, lspeed, lwidth;
242 pci_read_config_word(ha->pdev, pcie_reg, &pcie_lstat);
243 lspeed = pcie_lstat & (BIT_0 | BIT_1 | BIT_2 | BIT_3);
244 lwidth = (pcie_lstat &
245 (BIT_4 | BIT_5 | BIT_6 | BIT_7 | BIT_8 | BIT_9)) >> 4;
247 strcpy(str, "PCIe (");
249 strcat(str, "2.5Gb/s ");
251 strcat(str, "<unknown> ");
252 snprintf(lwstr, sizeof(lwstr), "x%d)", lwidth);
259 pci_bus = (ha->pci_attr & CSRX_PCIX_BUS_MODE_MASK) >> 8;
260 if (pci_bus == 0 || pci_bus == 8) {
262 strcat(str, pci_bus_modes[pci_bus >> 3]);
266 strcat(str, "Mode 2");
268 strcat(str, "Mode 1");
270 strcat(str, pci_bus_modes[pci_bus & ~BIT_2]);
272 strcat(str, " MHz)");
278 qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str)
282 sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
283 ha->fw_minor_version,
284 ha->fw_subminor_version);
286 if (ha->fw_attributes & BIT_9) {
291 switch (ha->fw_attributes & 0xFF) {
305 sprintf(un_str, "(%x)", ha->fw_attributes);
309 if (ha->fw_attributes & 0x100)
316 qla24xx_fw_version_str(struct scsi_qla_host *ha, char *str)
318 sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
319 ha->fw_minor_version,
320 ha->fw_subminor_version);
322 if (ha->fw_attributes & BIT_0)
323 strcat(str, "[Class 2] ");
324 if (ha->fw_attributes & BIT_1)
325 strcat(str, "[IP] ");
326 if (ha->fw_attributes & BIT_2)
327 strcat(str, "[Multi-ID] ");
328 if (ha->fw_attributes & BIT_13)
329 strcat(str, "[Experimental]");
333 static inline srb_t *
334 qla2x00_get_new_sp(scsi_qla_host_t *ha, fc_port_t *fcport,
335 struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
339 sp = mempool_alloc(ha->srb_mempool, GFP_ATOMIC);
347 CMD_SP(cmd) = (void *)sp;
348 cmd->scsi_done = done;
354 qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
356 scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
357 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
358 struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
362 rval = fc_remote_port_chkready(rport);
365 goto qc_fail_command;
368 /* Close window on fcport/rport state-transitioning. */
369 if (!*(fc_port_t **)rport->dd_data) {
370 cmd->result = DID_IMM_RETRY << 16;
371 goto qc_fail_command;
374 if (atomic_read(&fcport->state) != FCS_ONLINE) {
375 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
376 atomic_read(&ha->loop_state) == LOOP_DEAD) {
377 cmd->result = DID_NO_CONNECT << 16;
378 goto qc_fail_command;
383 spin_unlock_irq(ha->host->host_lock);
385 sp = qla2x00_get_new_sp(ha, fcport, cmd, done);
387 goto qc_host_busy_lock;
389 rval = qla2x00_start_scsi(sp);
390 if (rval != QLA_SUCCESS)
391 goto qc_host_busy_free_sp;
393 spin_lock_irq(ha->host->host_lock);
397 qc_host_busy_free_sp:
398 qla2x00_sp_free_dma(ha, sp);
399 mempool_free(sp, ha->srb_mempool);
402 spin_lock_irq(ha->host->host_lock);
405 return SCSI_MLQUEUE_HOST_BUSY;
415 qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
417 scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
418 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
419 struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
423 rval = fc_remote_port_chkready(rport);
426 goto qc24_fail_command;
429 /* Close window on fcport/rport state-transitioning. */
430 if (!*(fc_port_t **)rport->dd_data) {
431 cmd->result = DID_IMM_RETRY << 16;
432 goto qc24_fail_command;
435 if (atomic_read(&fcport->state) != FCS_ONLINE) {
436 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
437 atomic_read(&ha->loop_state) == LOOP_DEAD) {
438 cmd->result = DID_NO_CONNECT << 16;
439 goto qc24_fail_command;
444 spin_unlock_irq(ha->host->host_lock);
446 sp = qla2x00_get_new_sp(ha, fcport, cmd, done);
448 goto qc24_host_busy_lock;
450 rval = qla24xx_start_scsi(sp);
451 if (rval != QLA_SUCCESS)
452 goto qc24_host_busy_free_sp;
454 spin_lock_irq(ha->host->host_lock);
458 qc24_host_busy_free_sp:
459 qla2x00_sp_free_dma(ha, sp);
460 mempool_free(sp, ha->srb_mempool);
463 spin_lock_irq(ha->host->host_lock);
466 return SCSI_MLQUEUE_HOST_BUSY;
476 * qla2x00_eh_wait_on_command
477 * Waits for the command to be returned by the Firmware for some
481 * ha = actual ha whose done queue will contain the command
482 * returned by firmware.
483 * cmd = Scsi Command to wait on.
484 * flag = Abort/Reset(Bus or Device Reset)
491 qla2x00_eh_wait_on_command(scsi_qla_host_t *ha, struct scsi_cmnd *cmd)
493 #define ABORT_POLLING_PERIOD 1000
494 #define ABORT_WAIT_ITER ((10 * 1000) / (ABORT_POLLING_PERIOD))
495 unsigned long wait_iter = ABORT_WAIT_ITER;
496 int ret = QLA_SUCCESS;
498 while (CMD_SP(cmd)) {
499 msleep(ABORT_POLLING_PERIOD);
505 ret = QLA_FUNCTION_FAILED;
511 * qla2x00_wait_for_hba_online
512 * Wait till the HBA is online after going through
513 * <= MAX_RETRIES_OF_ISP_ABORT or
514 * finally HBA is disabled ie marked offline
517 * ha - pointer to host adapter structure
520 * Does context switching-Release SPIN_LOCK
521 * (if any) before calling this routine.
524 * Success (Adapter is online) : 0
525 * Failed (Adapter is offline/disabled) : 1
528 qla2x00_wait_for_hba_online(scsi_qla_host_t *ha)
531 unsigned long wait_online;
533 wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ);
534 while (((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) ||
535 test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) ||
536 test_bit(ISP_ABORT_RETRY, &ha->dpc_flags) ||
537 ha->dpc_active) && time_before(jiffies, wait_online)) {
541 if (ha->flags.online)
542 return_status = QLA_SUCCESS;
544 return_status = QLA_FUNCTION_FAILED;
546 DEBUG2(printk("%s return_status=%d\n",__func__,return_status));
548 return (return_status);
552 * qla2x00_wait_for_loop_ready
553 * Wait for MAX_LOOP_TIMEOUT(5 min) value for loop
554 * to be in LOOP_READY state.
556 * ha - pointer to host adapter structure
559 * Does context switching-Release SPIN_LOCK
560 * (if any) before calling this routine.
564 * Success (LOOP_READY) : 0
565 * Failed (LOOP_NOT_READY) : 1
568 qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha)
570 int return_status = QLA_SUCCESS;
571 unsigned long loop_timeout ;
573 /* wait for 5 min at the max for loop to be ready */
574 loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ);
576 while ((!atomic_read(&ha->loop_down_timer) &&
577 atomic_read(&ha->loop_state) == LOOP_DOWN) ||
578 atomic_read(&ha->loop_state) != LOOP_READY) {
579 if (atomic_read(&ha->loop_state) == LOOP_DEAD) {
580 return_status = QLA_FUNCTION_FAILED;
584 if (time_after_eq(jiffies, loop_timeout)) {
585 return_status = QLA_FUNCTION_FAILED;
589 return (return_status);
592 /**************************************************************************
596 * The abort function will abort the specified command.
599 * cmd = Linux SCSI command packet to be aborted.
602 * Either SUCCESS or FAILED.
605 * Only return FAILED if command not returned by firmware.
606 **************************************************************************/
608 qla2xxx_eh_abort(struct scsi_cmnd *cmd)
610 scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
613 unsigned int id, lun;
614 unsigned long serial;
623 id = cmd->device->id;
624 lun = cmd->device->lun;
625 serial = cmd->serial_number;
627 /* Check active list for command command. */
628 spin_lock_irqsave(&ha->hardware_lock, flags);
629 for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) {
630 sp = ha->outstanding_cmds[i];
638 DEBUG2(printk("%s(%ld): aborting sp %p from RISC. pid=%ld.\n",
639 __func__, ha->host_no, sp, serial));
640 DEBUG3(qla2x00_print_scsi_cmd(cmd));
642 spin_unlock_irqrestore(&ha->hardware_lock, flags);
643 if (ha->isp_ops.abort_command(ha, sp)) {
644 DEBUG2(printk("%s(%ld): abort_command "
645 "mbx failed.\n", __func__, ha->host_no));
647 DEBUG3(printk("%s(%ld): abort_command "
648 "mbx success.\n", __func__, ha->host_no));
651 spin_lock_irqsave(&ha->hardware_lock, flags);
655 spin_unlock_irqrestore(&ha->hardware_lock, flags);
657 /* Wait for the command to be returned. */
659 if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) {
660 qla_printk(KERN_ERR, ha,
661 "scsi(%ld:%d:%d): Abort handler timed out -- %lx "
662 "%x.\n", ha->host_no, id, lun, serial, ret);
667 qla_printk(KERN_INFO, ha,
668 "scsi(%ld:%d:%d): Abort command issued -- %d %lx %x.\n",
669 ha->host_no, id, lun, wait, serial, ret);
674 /**************************************************************************
675 * qla2x00_eh_wait_for_pending_target_commands
678 * Waits for all the commands to come back from the specified target.
681 * ha - pointer to scsi_qla_host structure.
684 * Either SUCCESS or FAILED.
687 **************************************************************************/
689 qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
694 struct scsi_cmnd *cmd;
700 * Waiting for all commands for the designated target in the active
703 for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
704 spin_lock_irqsave(&ha->hardware_lock, flags);
705 sp = ha->outstanding_cmds[cnt];
708 spin_unlock_irqrestore(&ha->hardware_lock, flags);
709 if (cmd->device->id == t) {
710 if (!qla2x00_eh_wait_on_command(ha, cmd)) {
716 spin_unlock_irqrestore(&ha->hardware_lock, flags);
723 /**************************************************************************
724 * qla2xxx_eh_device_reset
727 * The device reset function will reset the target and abort any
728 * executing commands.
730 * NOTE: The use of SP is undefined within this context. Do *NOT*
731 * attempt to use this value, even if you determine it is
735 * cmd = Linux SCSI command packet of the command that cause the
739 * SUCCESS/FAILURE (defined as macro in scsi.h).
741 **************************************************************************/
743 qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
745 scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
746 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
749 unsigned int id, lun;
750 unsigned long serial;
754 id = cmd->device->id;
755 lun = cmd->device->lun;
756 serial = cmd->serial_number;
758 sp = (srb_t *) CMD_SP(cmd);
762 qla_printk(KERN_INFO, ha,
763 "scsi(%ld:%d:%d): DEVICE RESET ISSUED.\n", ha->host_no, id, lun);
765 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
766 goto eh_dev_reset_done;
768 if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) {
769 if (qla2x00_device_reset(ha, fcport) == 0)
772 #if defined(LOGOUT_AFTER_DEVICE_RESET)
773 if (ret == SUCCESS) {
774 if (fcport->flags & FC_FABRIC_DEVICE) {
775 ha->isp_ops.fabric_logout(ha, fcport->loop_id);
776 qla2x00_mark_device_lost(ha, fcport, 0, 0);
781 DEBUG2(printk(KERN_INFO
782 "%s failed: loop not ready\n",__func__));
786 DEBUG3(printk("%s(%ld): device reset failed\n",
787 __func__, ha->host_no));
788 qla_printk(KERN_INFO, ha, "%s: device reset failed\n",
791 goto eh_dev_reset_done;
794 /* Flush outstanding commands. */
795 if (qla2x00_eh_wait_for_pending_target_commands(ha, id))
798 DEBUG3(printk("%s(%ld): failed while waiting for commands\n",
799 __func__, ha->host_no));
800 qla_printk(KERN_INFO, ha,
801 "%s: failed while waiting for commands\n", __func__);
803 qla_printk(KERN_INFO, ha,
804 "scsi(%ld:%d:%d): DEVICE RESET SUCCEEDED.\n", ha->host_no,
810 /**************************************************************************
811 * qla2x00_eh_wait_for_pending_commands
814 * Waits for all the commands to come back from the specified host.
817 * ha - pointer to scsi_qla_host structure.
824 **************************************************************************/
826 qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha)
831 struct scsi_cmnd *cmd;
837 * Waiting for all commands for the designated target in the active
840 for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
841 spin_lock_irqsave(&ha->hardware_lock, flags);
842 sp = ha->outstanding_cmds[cnt];
845 spin_unlock_irqrestore(&ha->hardware_lock, flags);
846 status = qla2x00_eh_wait_on_command(ha, cmd);
851 spin_unlock_irqrestore(&ha->hardware_lock, flags);
858 /**************************************************************************
859 * qla2xxx_eh_bus_reset
862 * The bus reset function will reset the bus and abort any executing
866 * cmd = Linux SCSI command packet of the command that cause the
870 * SUCCESS/FAILURE (defined as macro in scsi.h).
872 **************************************************************************/
874 qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
876 scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
877 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
880 unsigned int id, lun;
881 unsigned long serial;
885 id = cmd->device->id;
886 lun = cmd->device->lun;
887 serial = cmd->serial_number;
889 sp = (srb_t *) CMD_SP(cmd);
893 qla_printk(KERN_INFO, ha,
894 "scsi(%ld:%d:%d): LOOP RESET ISSUED.\n", ha->host_no, id, lun);
896 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) {
897 DEBUG2(printk("%s failed:board disabled\n",__func__));
898 goto eh_bus_reset_done;
901 if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) {
902 if (qla2x00_loop_reset(ha) == QLA_SUCCESS)
906 goto eh_bus_reset_done;
908 /* Flush outstanding commands. */
909 if (!qla2x00_eh_wait_for_pending_commands(ha))
913 qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
914 (ret == FAILED) ? "failed" : "succeded");
919 /**************************************************************************
920 * qla2xxx_eh_host_reset
923 * The reset function will reset the Adapter.
926 * cmd = Linux SCSI command packet of the command that cause the
930 * Either SUCCESS or FAILED.
933 **************************************************************************/
935 qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
937 scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
938 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
941 unsigned int id, lun;
942 unsigned long serial;
946 id = cmd->device->id;
947 lun = cmd->device->lun;
948 serial = cmd->serial_number;
950 sp = (srb_t *) CMD_SP(cmd);
954 qla_printk(KERN_INFO, ha,
955 "scsi(%ld:%d:%d): ADAPTER RESET ISSUED.\n", ha->host_no, id, lun);
957 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
958 goto eh_host_reset_lock;
961 * Fixme-may be dpc thread is active and processing
962 * loop_resync,so wait a while for it to
963 * be completed and then issue big hammer.Otherwise
964 * it may cause I/O failure as big hammer marks the
965 * devices as lost kicking of the port_down_timer
966 * while dpc is stuck for the mailbox to complete.
968 qla2x00_wait_for_loop_ready(ha);
969 set_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
970 if (qla2x00_abort_isp(ha)) {
971 clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
972 /* failed. schedule dpc to try */
973 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
975 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
976 goto eh_host_reset_lock;
978 clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
980 /* Waiting for our command in done_queue to be returned to OS.*/
981 if (qla2x00_eh_wait_for_pending_commands(ha))
985 qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
986 (ret == FAILED) ? "failed" : "succeded");
996 * ha = adapter block pointer.
1002 qla2x00_loop_reset(scsi_qla_host_t *ha)
1004 int status = QLA_SUCCESS;
1005 struct fc_port *fcport;
1007 if (ha->flags.enable_lip_reset) {
1008 status = qla2x00_lip_reset(ha);
1011 if (status == QLA_SUCCESS && ha->flags.enable_target_reset) {
1012 list_for_each_entry(fcport, &ha->fcports, list) {
1013 if (fcport->port_type != FCT_TARGET)
1016 status = qla2x00_device_reset(ha, fcport);
1017 if (status != QLA_SUCCESS)
1022 if (status == QLA_SUCCESS &&
1023 ((!ha->flags.enable_target_reset &&
1024 !ha->flags.enable_lip_reset) ||
1025 ha->flags.enable_lip_full_login)) {
1027 status = qla2x00_full_login_lip(ha);
1030 /* Issue marker command only when we are going to start the I/O */
1031 ha->marker_needed = 1;
1035 DEBUG2_3(printk("%s(%ld): **** FAILED ****\n",
1040 DEBUG3(printk("%s(%ld): exiting normally.\n",
1049 * qla2x00_device_reset
1050 * Issue bus device reset message to the target.
1053 * ha = adapter block pointer.
1055 * TARGET_QUEUE_LOCK must be released.
1056 * ADAPTER_STATE_LOCK must be released.
1062 qla2x00_device_reset(scsi_qla_host_t *ha, fc_port_t *reset_fcport)
1064 /* Abort Target command will clear Reservation */
1065 return ha->isp_ops.abort_target(reset_fcport);
1069 qla2xxx_slave_alloc(struct scsi_device *sdev)
1071 struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
1073 if (!rport || fc_remote_port_chkready(rport))
1076 sdev->hostdata = *(fc_port_t **)rport->dd_data;
1082 qla2xxx_slave_configure(struct scsi_device *sdev)
1084 scsi_qla_host_t *ha = to_qla_host(sdev->host);
1085 struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
1087 if (sdev->tagged_supported)
1088 scsi_activate_tcq(sdev, 32);
1090 scsi_deactivate_tcq(sdev, 32);
1092 rport->dev_loss_tmo = ha->port_down_retry_count + 5;
1098 qla2xxx_slave_destroy(struct scsi_device *sdev)
1100 sdev->hostdata = NULL;
1104 qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth)
1106 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
1107 return sdev->queue_depth;
1111 qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
1113 if (sdev->tagged_supported) {
1114 scsi_set_tag_type(sdev, tag_type);
1116 scsi_activate_tcq(sdev, sdev->queue_depth);
1118 scsi_deactivate_tcq(sdev, sdev->queue_depth);
1126 * qla2x00_config_dma_addressing() - Configure OS DMA addressing method.
1129 * At exit, the @ha's flags.enable_64bit_addressing set to indicated
1130 * supported addressing method.
1133 qla2x00_config_dma_addressing(scsi_qla_host_t *ha)
1135 /* Assume a 32bit DMA mask. */
1136 ha->flags.enable_64bit_addressing = 0;
1138 if (!dma_set_mask(&ha->pdev->dev, DMA_64BIT_MASK)) {
1139 /* Any upper-dword bits set? */
1140 if (MSD(dma_get_required_mask(&ha->pdev->dev)) &&
1141 !pci_set_consistent_dma_mask(ha->pdev, DMA_64BIT_MASK)) {
1142 /* Ok, a 64bit DMA mask is applicable. */
1143 ha->flags.enable_64bit_addressing = 1;
1144 ha->isp_ops.calc_req_entries = qla2x00_calc_iocbs_64;
1145 ha->isp_ops.build_iocbs = qla2x00_build_scsi_iocbs_64;
1150 dma_set_mask(&ha->pdev->dev, DMA_32BIT_MASK);
1151 pci_set_consistent_dma_mask(ha->pdev, DMA_32BIT_MASK);
1155 qla2x00_set_isp_flags(scsi_qla_host_t *ha)
1157 ha->device_type = DT_EXTENDED_IDS;
1158 switch (ha->pdev->device) {
1159 case PCI_DEVICE_ID_QLOGIC_ISP2100:
1160 ha->device_type |= DT_ISP2100;
1161 ha->device_type &= ~DT_EXTENDED_IDS;
1162 ha->fw_srisc_address = RISC_START_ADDRESS_2100;
1164 case PCI_DEVICE_ID_QLOGIC_ISP2200:
1165 ha->device_type |= DT_ISP2200;
1166 ha->device_type &= ~DT_EXTENDED_IDS;
1167 ha->fw_srisc_address = RISC_START_ADDRESS_2100;
1169 case PCI_DEVICE_ID_QLOGIC_ISP2300:
1170 ha->device_type |= DT_ISP2300;
1171 ha->device_type |= DT_ZIO_SUPPORTED;
1172 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1174 case PCI_DEVICE_ID_QLOGIC_ISP2312:
1175 ha->device_type |= DT_ISP2312;
1176 ha->device_type |= DT_ZIO_SUPPORTED;
1177 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1179 case PCI_DEVICE_ID_QLOGIC_ISP2322:
1180 ha->device_type |= DT_ISP2322;
1181 ha->device_type |= DT_ZIO_SUPPORTED;
1182 if (ha->pdev->subsystem_vendor == 0x1028 &&
1183 ha->pdev->subsystem_device == 0x0170)
1184 ha->device_type |= DT_OEM_001;
1185 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1187 case PCI_DEVICE_ID_QLOGIC_ISP6312:
1188 ha->device_type |= DT_ISP6312;
1189 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1191 case PCI_DEVICE_ID_QLOGIC_ISP6322:
1192 ha->device_type |= DT_ISP6322;
1193 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1195 case PCI_DEVICE_ID_QLOGIC_ISP2422:
1196 ha->device_type |= DT_ISP2422;
1197 ha->device_type |= DT_ZIO_SUPPORTED;
1198 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1200 case PCI_DEVICE_ID_QLOGIC_ISP2432:
1201 ha->device_type |= DT_ISP2432;
1202 ha->device_type |= DT_ZIO_SUPPORTED;
1203 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1205 case PCI_DEVICE_ID_QLOGIC_ISP5422:
1206 ha->device_type |= DT_ISP5422;
1207 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1209 case PCI_DEVICE_ID_QLOGIC_ISP5432:
1210 ha->device_type |= DT_ISP5432;
1211 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1217 qla2x00_iospace_config(scsi_qla_host_t *ha)
1219 unsigned long pio, pio_len, pio_flags;
1220 unsigned long mmio, mmio_len, mmio_flags;
1222 /* We only need PIO for Flash operations on ISP2312 v2 chips. */
1223 pio = pci_resource_start(ha->pdev, 0);
1224 pio_len = pci_resource_len(ha->pdev, 0);
1225 pio_flags = pci_resource_flags(ha->pdev, 0);
1226 if (pio_flags & IORESOURCE_IO) {
1227 if (pio_len < MIN_IOBASE_LEN) {
1228 qla_printk(KERN_WARNING, ha,
1229 "Invalid PCI I/O region size (%s)...\n",
1230 pci_name(ha->pdev));
1234 qla_printk(KERN_WARNING, ha,
1235 "region #0 not a PIO resource (%s)...\n",
1236 pci_name(ha->pdev));
1240 /* Use MMIO operations for all accesses. */
1241 mmio = pci_resource_start(ha->pdev, 1);
1242 mmio_len = pci_resource_len(ha->pdev, 1);
1243 mmio_flags = pci_resource_flags(ha->pdev, 1);
1245 if (!(mmio_flags & IORESOURCE_MEM)) {
1246 qla_printk(KERN_ERR, ha,
1247 "region #0 not an MMIO resource (%s), aborting\n",
1248 pci_name(ha->pdev));
1249 goto iospace_error_exit;
1251 if (mmio_len < MIN_IOBASE_LEN) {
1252 qla_printk(KERN_ERR, ha,
1253 "Invalid PCI mem region size (%s), aborting\n",
1254 pci_name(ha->pdev));
1255 goto iospace_error_exit;
1258 if (pci_request_regions(ha->pdev, QLA2XXX_DRIVER_NAME)) {
1259 qla_printk(KERN_WARNING, ha,
1260 "Failed to reserve PIO/MMIO regions (%s)\n",
1261 pci_name(ha->pdev));
1263 goto iospace_error_exit;
1266 ha->pio_address = pio;
1267 ha->pio_length = pio_len;
1268 ha->iobase = ioremap(mmio, MIN_IOBASE_LEN);
1270 qla_printk(KERN_ERR, ha,
1271 "cannot remap MMIO (%s), aborting\n", pci_name(ha->pdev));
1273 goto iospace_error_exit;
1283 qla2x00_enable_intrs(scsi_qla_host_t *ha)
1285 unsigned long flags = 0;
1286 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1288 spin_lock_irqsave(&ha->hardware_lock, flags);
1289 ha->interrupts_on = 1;
1290 /* enable risc and host interrupts */
1291 WRT_REG_WORD(®->ictrl, ICR_EN_INT | ICR_EN_RISC);
1292 RD_REG_WORD(®->ictrl);
1293 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1298 qla2x00_disable_intrs(scsi_qla_host_t *ha)
1300 unsigned long flags = 0;
1301 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1303 spin_lock_irqsave(&ha->hardware_lock, flags);
1304 ha->interrupts_on = 0;
1305 /* disable risc and host interrupts */
1306 WRT_REG_WORD(®->ictrl, 0);
1307 RD_REG_WORD(®->ictrl);
1308 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1312 qla24xx_enable_intrs(scsi_qla_host_t *ha)
1314 unsigned long flags = 0;
1315 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1317 spin_lock_irqsave(&ha->hardware_lock, flags);
1318 ha->interrupts_on = 1;
1319 WRT_REG_DWORD(®->ictrl, ICRX_EN_RISC_INT);
1320 RD_REG_DWORD(®->ictrl);
1321 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1325 qla24xx_disable_intrs(scsi_qla_host_t *ha)
1327 unsigned long flags = 0;
1328 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1330 spin_lock_irqsave(&ha->hardware_lock, flags);
1331 ha->interrupts_on = 0;
1332 WRT_REG_DWORD(®->ictrl, 0);
1333 RD_REG_DWORD(®->ictrl);
1334 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1338 * PCI driver interface
1340 static int __devinit
1341 qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
1344 device_reg_t __iomem *reg;
1345 struct Scsi_Host *host;
1346 scsi_qla_host_t *ha;
1347 unsigned long flags = 0;
1348 unsigned long wait_switch = 0;
1352 struct scsi_host_template *sht;
1354 if (pci_enable_device(pdev))
1357 sht = &qla2x00_driver_template;
1358 if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
1359 pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432)
1360 sht = &qla24xx_driver_template;
1361 host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
1364 "qla2xxx: Couldn't allocate host from scsi layer!\n");
1365 goto probe_disable_device;
1368 /* Clear our data area */
1369 ha = (scsi_qla_host_t *)host->hostdata;
1370 memset(ha, 0, sizeof(scsi_qla_host_t));
1374 ha->host_no = host->host_no;
1375 sprintf(ha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, ha->host_no);
1377 /* Set ISP-type information. */
1378 qla2x00_set_isp_flags(ha);
1380 /* Configure PCI I/O space */
1381 ret = qla2x00_iospace_config(ha);
1385 qla_printk(KERN_INFO, ha,
1386 "Found an ISP%04X, irq %d, iobase 0x%p\n", pdev->device, pdev->irq,
1389 spin_lock_init(&ha->hardware_lock);
1391 ha->prev_topology = 0;
1392 ha->init_cb_size = sizeof(init_cb_t);
1393 ha->mgmt_svr_loop_id = MANAGEMENT_SERVER;
1394 ha->link_data_rate = LDR_UNKNOWN;
1395 ha->optrom_size = OPTROM_SIZE_2300;
1397 /* Assign ISP specific operations. */
1398 ha->isp_ops.pci_config = qla2100_pci_config;
1399 ha->isp_ops.reset_chip = qla2x00_reset_chip;
1400 ha->isp_ops.chip_diag = qla2x00_chip_diag;
1401 ha->isp_ops.config_rings = qla2x00_config_rings;
1402 ha->isp_ops.reset_adapter = qla2x00_reset_adapter;
1403 ha->isp_ops.nvram_config = qla2x00_nvram_config;
1404 ha->isp_ops.update_fw_options = qla2x00_update_fw_options;
1405 ha->isp_ops.load_risc = qla2x00_load_risc;
1406 ha->isp_ops.pci_info_str = qla2x00_pci_info_str;
1407 ha->isp_ops.fw_version_str = qla2x00_fw_version_str;
1408 ha->isp_ops.intr_handler = qla2100_intr_handler;
1409 ha->isp_ops.enable_intrs = qla2x00_enable_intrs;
1410 ha->isp_ops.disable_intrs = qla2x00_disable_intrs;
1411 ha->isp_ops.abort_command = qla2x00_abort_command;
1412 ha->isp_ops.abort_target = qla2x00_abort_target;
1413 ha->isp_ops.fabric_login = qla2x00_login_fabric;
1414 ha->isp_ops.fabric_logout = qla2x00_fabric_logout;
1415 ha->isp_ops.calc_req_entries = qla2x00_calc_iocbs_32;
1416 ha->isp_ops.build_iocbs = qla2x00_build_scsi_iocbs_32;
1417 ha->isp_ops.prep_ms_iocb = qla2x00_prep_ms_iocb;
1418 ha->isp_ops.prep_ms_fdmi_iocb = qla2x00_prep_ms_fdmi_iocb;
1419 ha->isp_ops.read_nvram = qla2x00_read_nvram_data;
1420 ha->isp_ops.write_nvram = qla2x00_write_nvram_data;
1421 ha->isp_ops.fw_dump = qla2100_fw_dump;
1422 ha->isp_ops.read_optrom = qla2x00_read_optrom_data;
1423 ha->isp_ops.write_optrom = qla2x00_write_optrom_data;
1424 if (IS_QLA2100(ha)) {
1425 host->max_id = MAX_TARGETS_2100;
1426 ha->mbx_count = MAILBOX_REGISTER_COUNT_2100;
1427 ha->request_q_length = REQUEST_ENTRY_CNT_2100;
1428 ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
1429 ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
1430 host->sg_tablesize = 32;
1431 ha->gid_list_info_size = 4;
1432 } else if (IS_QLA2200(ha)) {
1433 host->max_id = MAX_TARGETS_2200;
1434 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1435 ha->request_q_length = REQUEST_ENTRY_CNT_2200;
1436 ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
1437 ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
1438 ha->gid_list_info_size = 4;
1439 } else if (IS_QLA23XX(ha)) {
1440 host->max_id = MAX_TARGETS_2200;
1441 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1442 ha->request_q_length = REQUEST_ENTRY_CNT_2200;
1443 ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
1444 ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
1445 ha->isp_ops.pci_config = qla2300_pci_config;
1446 ha->isp_ops.intr_handler = qla2300_intr_handler;
1447 ha->isp_ops.fw_dump = qla2300_fw_dump;
1448 ha->isp_ops.beacon_on = qla2x00_beacon_on;
1449 ha->isp_ops.beacon_off = qla2x00_beacon_off;
1450 ha->isp_ops.beacon_blink = qla2x00_beacon_blink;
1451 ha->gid_list_info_size = 6;
1452 if (IS_QLA2322(ha) || IS_QLA6322(ha))
1453 ha->optrom_size = OPTROM_SIZE_2322;
1454 } else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
1455 host->max_id = MAX_TARGETS_2200;
1456 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1457 ha->request_q_length = REQUEST_ENTRY_CNT_24XX;
1458 ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
1459 ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
1460 ha->init_cb_size = sizeof(struct init_cb_24xx);
1461 ha->mgmt_svr_loop_id = 10;
1462 ha->isp_ops.pci_config = qla24xx_pci_config;
1463 ha->isp_ops.reset_chip = qla24xx_reset_chip;
1464 ha->isp_ops.chip_diag = qla24xx_chip_diag;
1465 ha->isp_ops.config_rings = qla24xx_config_rings;
1466 ha->isp_ops.reset_adapter = qla24xx_reset_adapter;
1467 ha->isp_ops.nvram_config = qla24xx_nvram_config;
1468 ha->isp_ops.update_fw_options = qla24xx_update_fw_options;
1469 ha->isp_ops.load_risc = qla24xx_load_risc;
1470 ha->isp_ops.pci_info_str = qla24xx_pci_info_str;
1471 ha->isp_ops.fw_version_str = qla24xx_fw_version_str;
1472 ha->isp_ops.intr_handler = qla24xx_intr_handler;
1473 ha->isp_ops.enable_intrs = qla24xx_enable_intrs;
1474 ha->isp_ops.disable_intrs = qla24xx_disable_intrs;
1475 ha->isp_ops.abort_command = qla24xx_abort_command;
1476 ha->isp_ops.abort_target = qla24xx_abort_target;
1477 ha->isp_ops.fabric_login = qla24xx_login_fabric;
1478 ha->isp_ops.fabric_logout = qla24xx_fabric_logout;
1479 ha->isp_ops.prep_ms_iocb = qla24xx_prep_ms_iocb;
1480 ha->isp_ops.prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb;
1481 ha->isp_ops.read_nvram = qla24xx_read_nvram_data;
1482 ha->isp_ops.write_nvram = qla24xx_write_nvram_data;
1483 ha->isp_ops.fw_dump = qla24xx_fw_dump;
1484 ha->isp_ops.read_optrom = qla24xx_read_optrom_data;
1485 ha->isp_ops.write_optrom = qla24xx_write_optrom_data;
1486 ha->isp_ops.beacon_on = qla24xx_beacon_on;
1487 ha->isp_ops.beacon_off = qla24xx_beacon_off;
1488 ha->isp_ops.beacon_blink = qla24xx_beacon_blink;
1489 ha->gid_list_info_size = 8;
1490 ha->optrom_size = OPTROM_SIZE_24XX;
1492 host->can_queue = ha->request_q_length + 128;
1494 /* load the F/W, read paramaters, and init the H/W */
1495 ha->instance = num_hosts;
1497 init_MUTEX(&ha->mbx_cmd_sem);
1498 init_MUTEX_LOCKED(&ha->mbx_intr_sem);
1500 INIT_LIST_HEAD(&ha->list);
1501 INIT_LIST_HEAD(&ha->fcports);
1504 * These locks are used to prevent more than one CPU
1505 * from modifying the queue at the same time. The
1506 * higher level "host_lock" will reduce most
1507 * contention for these locks.
1509 spin_lock_init(&ha->mbx_reg_lock);
1511 qla2x00_config_dma_addressing(ha);
1512 if (qla2x00_mem_alloc(ha)) {
1513 qla_printk(KERN_WARNING, ha,
1514 "[ERROR] Failed to allocate memory for adapter\n");
1520 if (qla2x00_initialize_adapter(ha) &&
1521 !(ha->device_flags & DFLG_NO_CABLE)) {
1523 qla_printk(KERN_WARNING, ha,
1524 "Failed to initialize adapter\n");
1526 DEBUG2(printk("scsi(%ld): Failed to initialize adapter - "
1527 "Adapter flags %x.\n",
1528 ha->host_no, ha->device_flags));
1535 * Startup the kernel thread for this host adapter
1537 ha->dpc_thread = kthread_create(qla2x00_do_dpc, ha,
1538 "%s_dpc", ha->host_str);
1539 if (IS_ERR(ha->dpc_thread)) {
1540 qla_printk(KERN_WARNING, ha,
1541 "Unable to start DPC thread!\n");
1542 ret = PTR_ERR(ha->dpc_thread);
1546 host->this_id = 255;
1547 host->cmd_per_lun = 3;
1548 host->unique_id = ha->instance;
1549 host->max_cmd_len = MAX_CMDSZ;
1550 host->max_channel = MAX_BUSES - 1;
1551 host->max_lun = MAX_LUNS;
1552 host->transportt = qla2xxx_transport_template;
1554 ret = request_irq(pdev->irq, ha->isp_ops.intr_handler,
1555 IRQF_DISABLED|IRQF_SHARED, QLA2XXX_DRIVER_NAME, ha);
1557 qla_printk(KERN_WARNING, ha,
1558 "Failed to reserve interrupt %d already in use.\n",
1562 host->irq = pdev->irq;
1564 /* Initialized the timer */
1565 qla2x00_start_timer(ha, qla2x00_timer, WATCH_INTERVAL);
1567 DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n",
1570 ha->isp_ops.disable_intrs(ha);
1572 spin_lock_irqsave(&ha->hardware_lock, flags);
1574 if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
1575 WRT_REG_DWORD(®->isp24.hccr, HCCRX_CLR_HOST_INT);
1576 WRT_REG_DWORD(®->isp24.hccr, HCCRX_CLR_RISC_INT);
1578 WRT_REG_WORD(®->isp.semaphore, 0);
1579 WRT_REG_WORD(®->isp.hccr, HCCR_CLR_RISC_INT);
1580 WRT_REG_WORD(®->isp.hccr, HCCR_CLR_HOST_INT);
1582 /* Enable proper parity */
1583 if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) {
1586 WRT_REG_WORD(®->isp.hccr,
1587 (HCCR_ENABLE_PARITY + 0x1));
1589 /* SRAM, Instruction RAM and GP RAM parity */
1590 WRT_REG_WORD(®->isp.hccr,
1591 (HCCR_ENABLE_PARITY + 0x7));
1594 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1596 ha->isp_ops.enable_intrs(ha);
1600 * Wait around max loop_reset_delay secs for the devices to come
1601 * on-line. We don't want Linux scanning before we are ready.
1604 for (wait_switch = jiffies + (ha->loop_reset_delay * HZ);
1605 time_before(jiffies,wait_switch) &&
1606 !(ha->device_flags & (DFLG_NO_CABLE | DFLG_FABRIC_DEVICES))
1607 && (ha->device_flags & SWITCH_FOUND) ;) {
1609 qla2x00_check_fabric_devices(ha);
1614 pci_set_drvdata(pdev, ha);
1615 ha->flags.init_done = 1;
1618 ret = scsi_add_host(host, &pdev->dev);
1622 qla2x00_alloc_sysfs_attr(ha);
1624 qla2x00_init_host_attr(ha);
1626 qla_printk(KERN_INFO, ha, "\n"
1627 " QLogic Fibre Channel HBA Driver: %s\n"
1629 " ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n",
1630 qla2x00_version_str, ha->model_number,
1631 ha->model_desc ? ha->model_desc: "", pdev->device,
1632 ha->isp_ops.pci_info_str(ha, pci_info), pci_name(pdev),
1633 ha->flags.enable_64bit_addressing ? '+': '-', ha->host_no,
1634 ha->isp_ops.fw_version_str(ha, fw_str));
1636 /* Go with fc_rport registration. */
1637 list_for_each_entry(fcport, &ha->fcports, list)
1638 qla2x00_reg_remote_port(ha, fcport);
1643 qla2x00_free_device(ha);
1645 scsi_host_put(host);
1647 probe_disable_device:
1648 pci_disable_device(pdev);
1654 static void __devexit
1655 qla2x00_remove_one(struct pci_dev *pdev)
1657 scsi_qla_host_t *ha;
1659 ha = pci_get_drvdata(pdev);
1661 qla2x00_free_sysfs_attr(ha);
1663 fc_remove_host(ha->host);
1665 scsi_remove_host(ha->host);
1667 qla2x00_free_device(ha);
1669 scsi_host_put(ha->host);
1671 pci_set_drvdata(pdev, NULL);
1675 qla2x00_free_device(scsi_qla_host_t *ha)
1678 if (ha->timer_active)
1679 qla2x00_stop_timer(ha);
1681 /* Kill the kernel thread for this host */
1682 if (ha->dpc_thread) {
1683 struct task_struct *t = ha->dpc_thread;
1686 * qla2xxx_wake_dpc checks for ->dpc_thread
1687 * so we need to zero it out.
1689 ha->dpc_thread = NULL;
1694 qla2x00_trace_control(ha, TC_DISABLE, 0, 0);
1696 /* Stop currently executing firmware. */
1697 qla2x00_stop_firmware(ha);
1699 /* turn-off interrupts on the card */
1700 if (ha->interrupts_on)
1701 ha->isp_ops.disable_intrs(ha);
1703 qla2x00_mem_free(ha);
1705 ha->flags.online = 0;
1707 /* Detach interrupts */
1709 free_irq(ha->host->irq, ha);
1711 /* release io space registers */
1713 iounmap(ha->iobase);
1714 pci_release_regions(ha->pdev);
1716 pci_disable_device(ha->pdev);
1720 qla2x00_schedule_rport_del(struct scsi_qla_host *ha, fc_port_t *fcport,
1723 unsigned long flags;
1724 struct fc_rport *rport;
1729 rport = fcport->rport;
1731 spin_lock_irqsave(&fcport->rport_lock, flags);
1732 fcport->drport = rport;
1733 fcport->rport = NULL;
1734 *(fc_port_t **)rport->dd_data = NULL;
1735 spin_unlock_irqrestore(&fcport->rport_lock, flags);
1736 set_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags);
1738 spin_lock_irqsave(&fcport->rport_lock, flags);
1739 fcport->rport = NULL;
1740 *(fc_port_t **)rport->dd_data = NULL;
1741 spin_unlock_irqrestore(&fcport->rport_lock, flags);
1742 fc_remote_port_delete(rport);
1747 * qla2x00_mark_device_lost Updates fcport state when device goes offline.
1749 * Input: ha = adapter block pointer. fcport = port structure pointer.
1755 void qla2x00_mark_device_lost(scsi_qla_host_t *ha, fc_port_t *fcport,
1756 int do_login, int defer)
1758 if (atomic_read(&fcport->state) == FCS_ONLINE)
1759 qla2x00_schedule_rport_del(ha, fcport, defer);
1762 * We may need to retry the login, so don't change the state of the
1763 * port but do the retries.
1765 if (atomic_read(&fcport->state) != FCS_DEVICE_DEAD)
1766 atomic_set(&fcport->state, FCS_DEVICE_LOST);
1771 if (fcport->login_retry == 0) {
1772 fcport->login_retry = ha->login_retry_count;
1773 set_bit(RELOGIN_NEEDED, &ha->dpc_flags);
1775 DEBUG(printk("scsi(%ld): Port login retry: "
1776 "%02x%02x%02x%02x%02x%02x%02x%02x, "
1777 "id = 0x%04x retry cnt=%d\n",
1779 fcport->port_name[0],
1780 fcport->port_name[1],
1781 fcport->port_name[2],
1782 fcport->port_name[3],
1783 fcport->port_name[4],
1784 fcport->port_name[5],
1785 fcport->port_name[6],
1786 fcport->port_name[7],
1788 fcport->login_retry));
1793 * qla2x00_mark_all_devices_lost
1794 * Updates fcport state when device goes offline.
1797 * ha = adapter block pointer.
1798 * fcport = port structure pointer.
1806 qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha, int defer)
1810 list_for_each_entry(fcport, &ha->fcports, list) {
1811 if (fcport->port_type != FCT_TARGET)
1815 * No point in marking the device as lost, if the device is
1818 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
1820 if (atomic_read(&fcport->state) == FCS_ONLINE)
1821 qla2x00_schedule_rport_del(ha, fcport, defer);
1822 atomic_set(&fcport->state, FCS_DEVICE_LOST);
1826 qla2xxx_wake_dpc(ha);
1831 * Allocates adapter memory.
1838 qla2x00_mem_alloc(scsi_qla_host_t *ha)
1846 * This will loop only once if everything goes well, else some
1847 * number of retries will be performed to get around a kernel
1848 * bug where available mem is not allocated until after a
1849 * little delay and a retry.
1851 ha->request_ring = dma_alloc_coherent(&ha->pdev->dev,
1852 (ha->request_q_length + 1) * sizeof(request_t),
1853 &ha->request_dma, GFP_KERNEL);
1854 if (ha->request_ring == NULL) {
1855 qla_printk(KERN_WARNING, ha,
1856 "Memory Allocation failed - request_ring\n");
1858 qla2x00_mem_free(ha);
1864 ha->response_ring = dma_alloc_coherent(&ha->pdev->dev,
1865 (ha->response_q_length + 1) * sizeof(response_t),
1866 &ha->response_dma, GFP_KERNEL);
1867 if (ha->response_ring == NULL) {
1868 qla_printk(KERN_WARNING, ha,
1869 "Memory Allocation failed - response_ring\n");
1871 qla2x00_mem_free(ha);
1877 ha->gid_list = dma_alloc_coherent(&ha->pdev->dev, GID_LIST_SIZE,
1878 &ha->gid_list_dma, GFP_KERNEL);
1879 if (ha->gid_list == NULL) {
1880 qla_printk(KERN_WARNING, ha,
1881 "Memory Allocation failed - gid_list\n");
1883 qla2x00_mem_free(ha);
1889 snprintf(name, sizeof(name), "%s_%ld", QLA2XXX_DRIVER_NAME,
1891 ha->s_dma_pool = dma_pool_create(name, &ha->pdev->dev,
1892 DMA_POOL_SIZE, 8, 0);
1893 if (ha->s_dma_pool == NULL) {
1894 qla_printk(KERN_WARNING, ha,
1895 "Memory Allocation failed - s_dma_pool\n");
1897 qla2x00_mem_free(ha);
1903 /* get consistent memory allocated for init control block */
1904 ha->init_cb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
1906 if (ha->init_cb == NULL) {
1907 qla_printk(KERN_WARNING, ha,
1908 "Memory Allocation failed - init_cb\n");
1910 qla2x00_mem_free(ha);
1915 memset(ha->init_cb, 0, ha->init_cb_size);
1917 if (qla2x00_allocate_sp_pool(ha)) {
1918 qla_printk(KERN_WARNING, ha,
1919 "Memory Allocation failed - "
1920 "qla2x00_allocate_sp_pool()\n");
1922 qla2x00_mem_free(ha);
1928 /* Allocate memory for SNS commands */
1929 if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
1930 /* Get consistent memory allocated for SNS commands */
1931 ha->sns_cmd = dma_alloc_coherent(&ha->pdev->dev,
1932 sizeof(struct sns_cmd_pkt), &ha->sns_cmd_dma,
1934 if (ha->sns_cmd == NULL) {
1936 qla_printk(KERN_WARNING, ha,
1937 "Memory Allocation failed - sns_cmd\n");
1939 qla2x00_mem_free(ha);
1944 memset(ha->sns_cmd, 0, sizeof(struct sns_cmd_pkt));
1946 /* Get consistent memory allocated for MS IOCB */
1947 ha->ms_iocb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
1949 if (ha->ms_iocb == NULL) {
1951 qla_printk(KERN_WARNING, ha,
1952 "Memory Allocation failed - ms_iocb\n");
1954 qla2x00_mem_free(ha);
1959 memset(ha->ms_iocb, 0, sizeof(ms_iocb_entry_t));
1962 * Get consistent memory allocated for CT SNS
1965 ha->ct_sns = dma_alloc_coherent(&ha->pdev->dev,
1966 sizeof(struct ct_sns_pkt), &ha->ct_sns_dma,
1968 if (ha->ct_sns == NULL) {
1970 qla_printk(KERN_WARNING, ha,
1971 "Memory Allocation failed - ct_sns\n");
1973 qla2x00_mem_free(ha);
1978 memset(ha->ct_sns, 0, sizeof(struct ct_sns_pkt));
1980 if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
1982 * Get consistent memory allocated for SFP
1985 ha->sfp_data = dma_pool_alloc(ha->s_dma_pool,
1986 GFP_KERNEL, &ha->sfp_data_dma);
1987 if (ha->sfp_data == NULL) {
1988 qla_printk(KERN_WARNING, ha,
1989 "Memory Allocation failed - "
1992 qla2x00_mem_free(ha);
1997 memset(ha->sfp_data, 0, SFP_BLOCK_SIZE);
2001 /* Done all allocations without any error. */
2004 } while (retry-- && status != 0);
2008 "%s(): **** FAILED ****\n", __func__);
2016 * Frees all adapter allocated memory.
2019 * ha = adapter block pointer.
2022 qla2x00_mem_free(scsi_qla_host_t *ha)
2024 struct list_head *fcpl, *fcptemp;
2029 DEBUG2(printk("%s(): ERROR invalid ha pointer.\n", __func__));
2034 qla2x00_free_sp_pool(ha);
2038 dma_free_coherent(&ha->pdev->dev,
2039 ntohl(ha->fw_dump->eft_size), ha->eft, ha->eft_dma);
2044 dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
2045 ha->sns_cmd, ha->sns_cmd_dma);
2048 dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt),
2049 ha->ct_sns, ha->ct_sns_dma);
2052 dma_pool_free(ha->s_dma_pool, ha->sfp_data, ha->sfp_data_dma);
2055 dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
2058 dma_pool_free(ha->s_dma_pool, ha->init_cb, ha->init_cb_dma);
2061 dma_pool_destroy(ha->s_dma_pool);
2064 dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list,
2067 if (ha->response_ring)
2068 dma_free_coherent(&ha->pdev->dev,
2069 (ha->response_q_length + 1) * sizeof(response_t),
2070 ha->response_ring, ha->response_dma);
2072 if (ha->request_ring)
2073 dma_free_coherent(&ha->pdev->dev,
2074 (ha->request_q_length + 1) * sizeof(request_t),
2075 ha->request_ring, ha->request_dma);
2080 ha->sns_cmd_dma = 0;
2084 ha->ms_iocb_dma = 0;
2086 ha->init_cb_dma = 0;
2088 ha->s_dma_pool = NULL;
2090 ha->gid_list = NULL;
2091 ha->gid_list_dma = 0;
2093 ha->response_ring = NULL;
2094 ha->response_dma = 0;
2095 ha->request_ring = NULL;
2096 ha->request_dma = 0;
2098 list_for_each_safe(fcpl, fcptemp, &ha->fcports) {
2099 fcport = list_entry(fcpl, fc_port_t, list);
2102 list_del_init(&fcport->list);
2105 INIT_LIST_HEAD(&ha->fcports);
2109 ha->fw_dump_reading = 0;
2111 vfree(ha->optrom_buffer);
2115 * qla2x00_allocate_sp_pool
2116 * This routine is called during initialization to allocate
2117 * memory for local srb_t.
2120 * ha = adapter block pointer.
2126 qla2x00_allocate_sp_pool(scsi_qla_host_t *ha)
2131 ha->srb_mempool = mempool_create_slab_pool(SRB_MIN_REQ, srb_cachep);
2132 if (ha->srb_mempool == NULL) {
2133 qla_printk(KERN_INFO, ha, "Unable to allocate SRB mempool.\n");
2134 rval = QLA_FUNCTION_FAILED;
2140 * This routine frees all adapter allocated memory.
2144 qla2x00_free_sp_pool( scsi_qla_host_t *ha)
2146 if (ha->srb_mempool) {
2147 mempool_destroy(ha->srb_mempool);
2148 ha->srb_mempool = NULL;
2152 /**************************************************************************
2154 * This kernel thread is a task that is schedule by the interrupt handler
2155 * to perform the background processing for interrupts.
2158 * This task always run in the context of a kernel thread. It
2159 * is kick-off by the driver's detect code and starts up
2160 * up one per adapter. It immediately goes to sleep and waits for
2161 * some fibre event. When either the interrupt handler or
2162 * the timer routine detects a event it will one of the task
2163 * bits then wake us up.
2164 **************************************************************************/
2166 qla2x00_do_dpc(void *data)
2168 scsi_qla_host_t *ha;
2171 uint16_t next_loopid;
2173 ha = (scsi_qla_host_t *)data;
2175 set_user_nice(current, -20);
2177 while (!kthread_should_stop()) {
2178 DEBUG3(printk("qla2x00: DPC handler sleeping\n"));
2180 set_current_state(TASK_INTERRUPTIBLE);
2182 __set_current_state(TASK_RUNNING);
2184 DEBUG3(printk("qla2x00: DPC handler waking up\n"));
2186 /* Initialization not yet finished. Don't do anything yet. */
2187 if (!ha->flags.init_done)
2190 DEBUG3(printk("scsi(%ld): DPC handler\n", ha->host_no));
2194 if (ha->flags.mbox_busy) {
2199 if (test_and_clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) {
2201 DEBUG(printk("scsi(%ld): dpc: sched "
2202 "qla2x00_abort_isp ha = %p\n",
2204 if (!(test_and_set_bit(ABORT_ISP_ACTIVE,
2207 if (qla2x00_abort_isp(ha)) {
2208 /* failed. retry later */
2209 set_bit(ISP_ABORT_NEEDED,
2212 clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
2214 DEBUG(printk("scsi(%ld): dpc: qla2x00_abort_isp end\n",
2218 if (test_and_clear_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags))
2219 qla2x00_update_fcports(ha);
2221 if (test_and_clear_bit(LOOP_RESET_NEEDED, &ha->dpc_flags)) {
2222 DEBUG(printk("scsi(%ld): dpc: sched loop_reset()\n",
2224 qla2x00_loop_reset(ha);
2227 if (test_and_clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) &&
2228 (!(test_and_set_bit(RESET_ACTIVE, &ha->dpc_flags)))) {
2230 DEBUG(printk("scsi(%ld): qla2x00_reset_marker()\n",
2233 qla2x00_rst_aen(ha);
2234 clear_bit(RESET_ACTIVE, &ha->dpc_flags);
2237 /* Retry each device up to login retry count */
2238 if ((test_and_clear_bit(RELOGIN_NEEDED, &ha->dpc_flags)) &&
2239 !test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) &&
2240 atomic_read(&ha->loop_state) != LOOP_DOWN) {
2242 DEBUG(printk("scsi(%ld): qla2x00_port_login()\n",
2246 list_for_each_entry(fcport, &ha->fcports, list) {
2247 if (fcport->port_type != FCT_TARGET)
2251 * If the port is not ONLINE then try to login
2252 * to it if we haven't run out of retries.
2254 if (atomic_read(&fcport->state) != FCS_ONLINE &&
2255 fcport->login_retry) {
2257 fcport->login_retry--;
2258 if (fcport->flags & FCF_FABRIC_DEVICE) {
2261 ha->isp_ops.fabric_logout(
2262 ha, fcport->loop_id,
2263 fcport->d_id.b.domain,
2264 fcport->d_id.b.area,
2265 fcport->d_id.b.al_pa);
2266 status = qla2x00_fabric_login(
2267 ha, fcport, &next_loopid);
2270 qla2x00_local_device_login(
2273 if (status == QLA_SUCCESS) {
2274 fcport->old_loop_id = fcport->loop_id;
2276 DEBUG(printk("scsi(%ld): port login OK: logged in ID 0x%x\n",
2277 ha->host_no, fcport->loop_id));
2279 qla2x00_update_fcport(ha,
2281 } else if (status == 1) {
2282 set_bit(RELOGIN_NEEDED, &ha->dpc_flags);
2283 /* retry the login again */
2284 DEBUG(printk("scsi(%ld): Retrying %d login again loop_id 0x%x\n",
2286 fcport->login_retry, fcport->loop_id));
2288 fcport->login_retry = 0;
2291 if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
2294 DEBUG(printk("scsi(%ld): qla2x00_port_login - end\n",
2298 if ((test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags)) &&
2299 atomic_read(&ha->loop_state) != LOOP_DOWN) {
2301 clear_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags);
2302 DEBUG(printk("scsi(%ld): qla2x00_login_retry()\n",
2305 set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
2307 DEBUG(printk("scsi(%ld): qla2x00_login_retry - end\n",
2311 if (test_and_clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) {
2313 DEBUG(printk("scsi(%ld): qla2x00_loop_resync()\n",
2316 if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE,
2319 qla2x00_loop_resync(ha);
2321 clear_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags);
2324 DEBUG(printk("scsi(%ld): qla2x00_loop_resync - end\n",
2328 if (test_and_clear_bit(FCPORT_RESCAN_NEEDED, &ha->dpc_flags)) {
2330 DEBUG(printk("scsi(%ld): Rescan flagged fcports...\n",
2333 qla2x00_rescan_fcports(ha);
2335 DEBUG(printk("scsi(%ld): Rescan flagged fcports..."
2340 if (!ha->interrupts_on)
2341 ha->isp_ops.enable_intrs(ha);
2343 if (test_and_clear_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags))
2344 ha->isp_ops.beacon_blink(ha);
2347 } /* End of while(1) */
2349 DEBUG(printk("scsi(%ld): DPC handler exiting\n", ha->host_no));
2352 * Make sure that nobody tries to wake us up again.
2360 qla2xxx_wake_dpc(scsi_qla_host_t *ha)
2363 wake_up_process(ha->dpc_thread);
2368 * Processes asynchronous reset.
2371 * ha = adapter block pointer.
2374 qla2x00_rst_aen(scsi_qla_host_t *ha)
2376 if (ha->flags.online && !ha->flags.reset_active &&
2377 !atomic_read(&ha->loop_down_timer) &&
2378 !(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags))) {
2380 clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
2383 * Issue marker command only when we are going to start
2386 ha->marker_needed = 1;
2387 } while (!atomic_read(&ha->loop_down_timer) &&
2388 (test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags)));
2393 qla2x00_sp_free_dma(scsi_qla_host_t *ha, srb_t *sp)
2395 struct scsi_cmnd *cmd = sp->cmd;
2397 if (sp->flags & SRB_DMA_VALID) {
2399 dma_unmap_sg(&ha->pdev->dev, cmd->request_buffer,
2400 cmd->use_sg, cmd->sc_data_direction);
2401 } else if (cmd->request_bufflen) {
2402 dma_unmap_single(&ha->pdev->dev, sp->dma_handle,
2403 cmd->request_bufflen, cmd->sc_data_direction);
2405 sp->flags &= ~SRB_DMA_VALID;
2411 qla2x00_sp_compl(scsi_qla_host_t *ha, srb_t *sp)
2413 struct scsi_cmnd *cmd = sp->cmd;
2415 qla2x00_sp_free_dma(ha, sp);
2417 mempool_free(sp, ha->srb_mempool);
2419 cmd->scsi_done(cmd);
2422 /**************************************************************************
2428 * Context: Interrupt
2429 ***************************************************************************/
2431 qla2x00_timer(scsi_qla_host_t *ha)
2433 unsigned long cpu_flags = 0;
2441 * Ports - Port down timer.
2443 * Whenever, a port is in the LOST state we start decrementing its port
2444 * down timer every second until it reaches zero. Once it reaches zero
2445 * the port it marked DEAD.
2448 list_for_each_entry(fcport, &ha->fcports, list) {
2449 if (fcport->port_type != FCT_TARGET)
2452 if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
2454 if (atomic_read(&fcport->port_down_timer) == 0)
2457 if (atomic_dec_and_test(&fcport->port_down_timer) != 0)
2458 atomic_set(&fcport->state, FCS_DEVICE_DEAD);
2460 DEBUG(printk("scsi(%ld): fcport-%d - port retry count: "
2463 t, atomic_read(&fcport->port_down_timer)));
2466 } /* End of for fcport */
2469 /* Loop down handler. */
2470 if (atomic_read(&ha->loop_down_timer) > 0 &&
2471 !(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags)) && ha->flags.online) {
2473 if (atomic_read(&ha->loop_down_timer) ==
2474 ha->loop_down_abort_time) {
2476 DEBUG(printk("scsi(%ld): Loop Down - aborting the "
2477 "queues before time expire\n",
2480 if (!IS_QLA2100(ha) && ha->link_down_timeout)
2481 atomic_set(&ha->loop_state, LOOP_DEAD);
2483 /* Schedule an ISP abort to return any tape commands. */
2484 spin_lock_irqsave(&ha->hardware_lock, cpu_flags);
2485 for (index = 1; index < MAX_OUTSTANDING_COMMANDS;
2489 sp = ha->outstanding_cmds[index];
2493 if (!(sfcp->flags & FCF_TAPE_PRESENT))
2496 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
2499 spin_unlock_irqrestore(&ha->hardware_lock, cpu_flags);
2501 set_bit(ABORT_QUEUES_NEEDED, &ha->dpc_flags);
2505 /* if the loop has been down for 4 minutes, reinit adapter */
2506 if (atomic_dec_and_test(&ha->loop_down_timer) != 0) {
2507 DEBUG(printk("scsi(%ld): Loop down exceed 4 mins - "
2508 "restarting queues.\n",
2511 set_bit(RESTART_QUEUES_NEEDED, &ha->dpc_flags);
2514 if (!(ha->device_flags & DFLG_NO_CABLE)) {
2515 DEBUG(printk("scsi(%ld): Loop down - "
2518 qla_printk(KERN_WARNING, ha,
2519 "Loop down - aborting ISP.\n");
2521 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
2524 DEBUG3(printk("scsi(%ld): Loop Down - seconds remaining %d\n",
2526 atomic_read(&ha->loop_down_timer)));
2529 /* Check if beacon LED needs to be blinked */
2530 if (ha->beacon_blink_led == 1) {
2531 set_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags);
2535 /* Schedule the DPC routine if needed */
2536 if ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) ||
2537 test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) ||
2538 test_bit(LOOP_RESET_NEEDED, &ha->dpc_flags) ||
2539 test_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags) ||
2541 test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags) ||
2542 test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) ||
2543 test_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags) ||
2544 test_bit(RELOGIN_NEEDED, &ha->dpc_flags)))
2545 qla2xxx_wake_dpc(ha);
2547 qla2x00_restart_timer(ha, WATCH_INTERVAL);
2550 /* XXX(hch): crude hack to emulate a down_timeout() */
2552 qla2x00_down_timeout(struct semaphore *sema, unsigned long timeout)
2554 const unsigned int step = 100; /* msecs */
2555 unsigned int iterations = jiffies_to_msecs(timeout)/100;
2558 if (!down_trylock(sema))
2560 if (msleep_interruptible(step))
2562 } while (--iterations >= 0);
2567 /* Firmware interface routines. */
2570 #define FW_ISP21XX 0
2571 #define FW_ISP22XX 1
2572 #define FW_ISP2300 2
2573 #define FW_ISP2322 3
2574 #define FW_ISP24XX 4
2576 static DECLARE_MUTEX(qla_fw_lock);
2578 static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
2579 { .name = "ql2100_fw.bin", .segs = { 0x1000, 0 }, },
2580 { .name = "ql2200_fw.bin", .segs = { 0x1000, 0 }, },
2581 { .name = "ql2300_fw.bin", .segs = { 0x800, 0 }, },
2582 { .name = "ql2322_fw.bin", .segs = { 0x800, 0x1c000, 0x1e000, 0 }, },
2583 { .name = "ql2400_fw.bin", },
2587 qla2x00_request_firmware(scsi_qla_host_t *ha)
2589 struct fw_blob *blob;
2592 if (IS_QLA2100(ha)) {
2593 blob = &qla_fw_blobs[FW_ISP21XX];
2594 } else if (IS_QLA2200(ha)) {
2595 blob = &qla_fw_blobs[FW_ISP22XX];
2596 } else if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) {
2597 blob = &qla_fw_blobs[FW_ISP2300];
2598 } else if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
2599 blob = &qla_fw_blobs[FW_ISP2322];
2600 } else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
2601 blob = &qla_fw_blobs[FW_ISP24XX];
2608 if (request_firmware(&blob->fw, blob->name, &ha->pdev->dev)) {
2609 DEBUG2(printk("scsi(%ld): Failed to load firmware image "
2610 "(%s).\n", ha->host_no, blob->name));
2622 qla2x00_release_firmware(void)
2627 for (idx = 0; idx < FW_BLOBS; idx++)
2628 if (qla_fw_blobs[idx].fw)
2629 release_firmware(qla_fw_blobs[idx].fw);
2633 static struct pci_device_id qla2xxx_pci_tbl[] = {
2634 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100) },
2635 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200) },
2636 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2300) },
2637 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2312) },
2638 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2322) },
2639 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6312) },
2640 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6322) },
2641 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2422) },
2642 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2432) },
2643 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5422) },
2644 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5432) },
2647 MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);
2649 static struct pci_driver qla2xxx_pci_driver = {
2650 .name = QLA2XXX_DRIVER_NAME,
2652 .owner = THIS_MODULE,
2654 .id_table = qla2xxx_pci_tbl,
2655 .probe = qla2x00_probe_one,
2656 .remove = __devexit_p(qla2x00_remove_one),
2660 * qla2x00_module_init - Module initialization.
2663 qla2x00_module_init(void)
2667 /* Allocate cache for SRBs. */
2668 srb_cachep = kmem_cache_create("qla2xxx_srbs", sizeof(srb_t), 0,
2669 SLAB_HWCACHE_ALIGN, NULL, NULL);
2670 if (srb_cachep == NULL) {
2672 "qla2xxx: Unable to allocate SRB cache...Failing load!\n");
2676 /* Derive version string. */
2677 strcpy(qla2x00_version_str, QLA2XXX_VERSION);
2678 if (extended_error_logging)
2679 strcat(qla2x00_version_str, "-debug");
2681 qla2xxx_transport_template =
2682 fc_attach_transport(&qla2xxx_transport_functions);
2683 if (!qla2xxx_transport_template)
2686 printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n");
2687 ret = pci_register_driver(&qla2xxx_pci_driver);
2689 kmem_cache_destroy(srb_cachep);
2690 fc_release_transport(qla2xxx_transport_template);
2696 * qla2x00_module_exit - Module cleanup.
2699 qla2x00_module_exit(void)
2701 pci_unregister_driver(&qla2xxx_pci_driver);
2702 qla2x00_release_firmware();
2703 kmem_cache_destroy(srb_cachep);
2704 fc_release_transport(qla2xxx_transport_template);
2707 module_init(qla2x00_module_init);
2708 module_exit(qla2x00_module_exit);
2710 MODULE_AUTHOR("QLogic Corporation");
2711 MODULE_DESCRIPTION("QLogic Fibre Channel HBA Driver");
2712 MODULE_LICENSE("GPL");
2713 MODULE_VERSION(QLA2XXX_VERSION);