git.oblomov.eu Git - linux-2.6/blob - drivers/video/sm501fb.c

   1 /* linux/drivers/video/sm501fb.c
   2  *
   3  * Copyright (c) 2006 Simtec Electronics
   4  *      Vincent Sanders <vince@simtec.co.uk>
   5  *      Ben Dooks <ben@simtec.co.uk>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  *
  11  * Framebuffer driver for the Silicon Motion SM501
  12  */
  13
  14 #include <linux/module.h>
  15 #include <linux/kernel.h>
  16 #include <linux/errno.h>
  17 #include <linux/string.h>
  18 #include <linux/mm.h>
  19 #include <linux/tty.h>
  20 #include <linux/slab.h>
  21 #include <linux/delay.h>
  22 #include <linux/fb.h>
  23 #include <linux/init.h>
  24 #include <linux/vmalloc.h>
  25 #include <linux/dma-mapping.h>
  26 #include <linux/interrupt.h>
  27 #include <linux/workqueue.h>
  28 #include <linux/wait.h>
  29 #include <linux/platform_device.h>
  30 #include <linux/clk.h>
  31 #include <linux/console.h>
  32
  33 #include <asm/io.h>
  34 #include <asm/uaccess.h>
  35 #include <asm/div64.h>
  36
  37 #ifdef CONFIG_PM
  38 #include <linux/pm.h>
  39 #endif
  40
  41 #include <linux/sm501.h>
  42 #include <linux/sm501-regs.h>
  43
  44 #define NR_PALETTE      256
  45
  46 enum sm501_controller {
  47         HEAD_CRT        = 0,
  48         HEAD_PANEL      = 1,
  49 };
  50
  51 /* SM501 memory address */
  52 struct sm501_mem {
  53         unsigned long    size;
  54         unsigned long    sm_addr;
  55         void __iomem    *k_addr;
  56 };
  57
  58 /* private data that is shared between all frambuffers* */
  59 struct sm501fb_info {
  60         struct device           *dev;
  61         struct fb_info          *fb[2];         /* fb info for both heads */
  62         struct resource         *fbmem_res;     /* framebuffer resource */
  63         struct resource         *regs_res;      /* registers resource */
  64         struct sm501_platdata_fb *pdata;        /* our platform data */
  65
  66         unsigned long            pm_crt_ctrl;   /* pm: crt ctrl save */
  67
  68         int                      irq;
  69         int                      swap_endian;   /* set to swap rgb=>bgr */
  70         void __iomem            *regs;          /* remapped registers */
  71         void __iomem            *fbmem;         /* remapped framebuffer */
  72         size_t                   fbmem_len;     /* length of remapped region */
  73 };
  74
  75 /* per-framebuffer private data */
  76 struct sm501fb_par {
  77         u32                      pseudo_palette[16];
  78
  79         enum sm501_controller    head;
  80         struct sm501_mem         cursor;
  81         struct sm501_mem         screen;
  82         struct fb_ops            ops;
  83
  84         void                    *store_fb;
  85         void                    *store_cursor;
  86         void __iomem            *cursor_regs;
  87         struct sm501fb_info     *info;
  88 };
  89
  90 /* Helper functions */
  91
  92 static inline int h_total(struct fb_var_screeninfo *var)
  93 {
  94         return var->xres + var->left_margin +
  95                 var->right_margin + var->hsync_len;
  96 }
  97
  98 static inline int v_total(struct fb_var_screeninfo *var)
  99 {
 100         return var->yres + var->upper_margin +
 101                 var->lower_margin + var->vsync_len;
 102 }
 103
 104 /* sm501fb_sync_regs()
 105  *
 106  * This call is mainly for PCI bus systems where we need to
 107  * ensure that any writes to the bus are completed before the
 108  * next phase, or after completing a function.
 109 */
 110
 111 static inline void sm501fb_sync_regs(struct sm501fb_info *info)
 112 {
 113         readl(info->regs);
 114 }
 115
 116 /* sm501_alloc_mem
 117  *
 118  * This is an attempt to lay out memory for the two framebuffers and
 119  * everything else
 120  *
 121  * |fbmem_res->start                                           fbmem_res->end|
 122  * |                                                                         |
 123  * |fb[0].fix.smem_start    |         |fb[1].fix.smem_start    |     2K      |
 124  * |-> fb[0].fix.smem_len <-| spare   |-> fb[1].fix.smem_len <-|-> cursors <-|
 125  *
 126  * The "spare" space is for the 2d engine data
 127  * the fixed is space for the cursors (2x1Kbyte)
 128  *
 129  * we need to allocate memory for the 2D acceleration engine
 130  * command list and the data for the engine to deal with.
 131  *
 132  * - all allocations must be 128bit aligned
 133  * - cursors are 64x64x2 bits (1Kbyte)
 134  *
 135  */
 136
 137 #define SM501_MEMF_CURSOR               (1)
 138 #define SM501_MEMF_PANEL                (2)
 139 #define SM501_MEMF_CRT                  (4)
 140 #define SM501_MEMF_ACCEL                (8)
 141
 142 static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem,
 143                            unsigned int why, size_t size)
 144 {
 145         unsigned int ptr = 0;
 146
 147         switch (why) {
 148         case SM501_MEMF_CURSOR:
 149                 ptr = inf->fbmem_len - size;
 150                 inf->fbmem_len = ptr;
 151                 break;
 152
 153         case SM501_MEMF_PANEL:
 154                 ptr = inf->fbmem_len - size;
 155                 if (ptr < inf->fb[0]->fix.smem_len)
 156                         return -ENOMEM;
 157
 158                 break;
 159
 160         case SM501_MEMF_CRT:
 161                 ptr = 0;
 162                 break;
 163
 164         case SM501_MEMF_ACCEL:
 165                 ptr = inf->fb[0]->fix.smem_len;
 166
 167                 if ((ptr + size) >
 168                     (inf->fb[1]->fix.smem_start - inf->fbmem_res->start))
 169                         return -ENOMEM;
 170                 break;
 171
 172         default:
 173                 return -EINVAL;
 174         }
 175
 176         mem->size    = size;
 177         mem->sm_addr = ptr;
 178         mem->k_addr  = inf->fbmem + ptr;
 179
 180         dev_dbg(inf->dev, "%s: result %08lx, %p - %u, %zd\n",
 181                 __func__, mem->sm_addr, mem->k_addr, why, size);
 182
 183         return 0;
 184 }
 185
 186 /* sm501fb_ps_to_hz
 187  *
 188  * Converts a period in picoseconds to Hz.
 189  *
 190  * Note, we try to keep this in Hz to minimise rounding with
 191  * the limited PLL settings on the SM501.
 192 */
 193
 194 static unsigned long sm501fb_ps_to_hz(unsigned long psvalue)
 195 {
 196         unsigned long long numerator=1000000000000ULL;
 197
 198         /* 10^12 / picosecond period gives frequency in Hz */
 199         do_div(numerator, psvalue);
 200         return (unsigned long)numerator;
 201 }
 202
 203 /* sm501fb_hz_to_ps is identical to the oposite transform */
 204
 205 #define sm501fb_hz_to_ps(x) sm501fb_ps_to_hz(x)
 206
 207 /* sm501fb_setup_gamma
 208  *
 209  * Programs a linear 1.0 gamma ramp in case the gamma
 210  * correction is enabled without programming anything else.
 211 */
 212
 213 static void sm501fb_setup_gamma(struct sm501fb_info *fbi,
 214                                 unsigned long palette)
 215 {
 216         unsigned long value = 0;
 217         int offset;
 218
 219         /* set gamma values */
 220         for (offset = 0; offset < 256 * 4; offset += 4) {
 221                 writel(value, fbi->regs + palette + offset);
 222                 value += 0x010101;      /* Advance RGB by 1,1,1.*/
 223         }
 224 }
 225
 226 /* sm501fb_check_var
 227  *
 228  * check common variables for both panel and crt
 229 */
 230
 231 static int sm501fb_check_var(struct fb_var_screeninfo *var,
 232                              struct fb_info *info)
 233 {
 234         struct sm501fb_par  *par = info->par;
 235         struct sm501fb_info *sm  = par->info;
 236         unsigned long tmp;
 237
 238         /* check we can fit these values into the registers */
 239
 240         if (var->hsync_len > 255 || var->vsync_len > 63)
 241                 return -EINVAL;
 242
 243         /* hdisplay end and hsync start */
 244         if ((var->xres + var->right_margin) > 4096)
 245                 return -EINVAL;
 246
 247         /* vdisplay end and vsync start */
 248         if ((var->yres + var->lower_margin) > 2048)
 249                 return -EINVAL;
 250
 251         /* hard limits of device */
 252
 253         if (h_total(var) > 4096 || v_total(var) > 2048)
 254                 return -EINVAL;
 255
 256         /* check our line length is going to be 128 bit aligned */
 257
 258         tmp = (var->xres * var->bits_per_pixel) / 8;
 259         if ((tmp & 15) != 0)
 260                 return -EINVAL;
 261
 262         /* check the virtual size */
 263
 264         if (var->xres_virtual > 4096 || var->yres_virtual > 2048)
 265                 return -EINVAL;
 266
 267         /* can cope with 8,16 or 32bpp */
 268
 269         if (var->bits_per_pixel <= 8)
 270                 var->bits_per_pixel = 8;
 271         else if (var->bits_per_pixel <= 16)
 272                 var->bits_per_pixel = 16;
 273         else if (var->bits_per_pixel == 24)
 274                 var->bits_per_pixel = 32;
 275
 276         /* set r/g/b positions and validate bpp */
 277         switch(var->bits_per_pixel) {
 278         case 8:
 279                 var->red.length         = var->bits_per_pixel;
 280                 var->red.offset         = 0;
 281                 var->green.length       = var->bits_per_pixel;
 282                 var->green.offset       = 0;
 283                 var->blue.length        = var->bits_per_pixel;
 284                 var->blue.offset        = 0;
 285                 var->transp.length      = 0;
 286                 var->transp.offset      = 0;
 287
 288                 break;
 289
 290         case 16:
 291                 if (sm->pdata->flags & SM501_FBPD_SWAP_FB_ENDIAN) {
 292                         var->blue.offset        = 11;
 293                         var->green.offset       = 5;
 294                         var->red.offset         = 0;
 295                 } else {
 296                         var->red.offset         = 11;
 297                         var->green.offset       = 5;
 298                         var->blue.offset        = 0;
 299                 }
 300                 var->transp.offset      = 0;
 301
 302                 var->red.length         = 5;
 303                 var->green.length       = 6;
 304                 var->blue.length        = 5;
 305                 var->transp.length      = 0;
 306                 break;
 307
 308         case 32:
 309                 if (sm->pdata->flags & SM501_FBPD_SWAP_FB_ENDIAN) {
 310                         var->transp.offset      = 0;
 311                         var->red.offset         = 8;
 312                         var->green.offset       = 16;
 313                         var->blue.offset        = 24;
 314                 } else {
 315                         var->transp.offset      = 24;
 316                         var->red.offset         = 16;
 317                         var->green.offset       = 8;
 318                         var->blue.offset        = 0;
 319                 }
 320
 321                 var->red.length         = 8;
 322                 var->green.length       = 8;
 323                 var->blue.length        = 8;
 324                 var->transp.length      = 0;
 325                 break;
 326
 327         default:
 328                 return -EINVAL;
 329         }
 330
 331         return 0;
 332 }
 333
 334 /*
 335  * sm501fb_check_var_crt():
 336  *
 337  * check the parameters for the CRT head, and either bring them
 338  * back into range, or return -EINVAL.
 339 */
 340
 341 static int sm501fb_check_var_crt(struct fb_var_screeninfo *var,
 342                                  struct fb_info *info)
 343 {
 344         return sm501fb_check_var(var, info);
 345 }
 346
 347 /* sm501fb_check_var_pnl():
 348  *
 349  * check the parameters for the CRT head, and either bring them
 350  * back into range, or return -EINVAL.
 351 */
 352
 353 static int sm501fb_check_var_pnl(struct fb_var_screeninfo *var,
 354                                  struct fb_info *info)
 355 {
 356         return sm501fb_check_var(var, info);
 357 }
 358
 359 /* sm501fb_set_par_common
 360  *
 361  * set common registers for framebuffers
 362 */
 363
 364 static int sm501fb_set_par_common(struct fb_info *info,
 365                                   struct fb_var_screeninfo *var)
 366 {
 367         struct sm501fb_par  *par = info->par;
 368         struct sm501fb_info *fbi = par->info;
 369         unsigned long pixclock;      /* pixelclock in Hz */
 370         unsigned long sm501pixclock; /* pixelclock the 501 can achive in Hz */
 371         unsigned int mem_type;
 372         unsigned int clock_type;
 373         unsigned int head_addr;
 374
 375         dev_dbg(fbi->dev, "%s: %dx%d, bpp = %d, virtual %dx%d\n",
 376                 __func__, var->xres, var->yres, var->bits_per_pixel,
 377                 var->xres_virtual, var->yres_virtual);
 378
 379         switch (par->head) {
 380         case HEAD_CRT:
 381                 mem_type = SM501_MEMF_CRT;
 382                 clock_type = SM501_CLOCK_V2XCLK;
 383                 head_addr = SM501_DC_CRT_FB_ADDR;
 384                 break;
 385
 386         case HEAD_PANEL:
 387                 mem_type = SM501_MEMF_PANEL;
 388                 clock_type = SM501_CLOCK_P2XCLK;
 389                 head_addr = SM501_DC_PANEL_FB_ADDR;
 390                 break;
 391
 392         default:
 393                 mem_type = 0;           /* stop compiler warnings */
 394                 head_addr = 0;
 395                 clock_type = 0;
 396         }
 397
 398         switch (var->bits_per_pixel) {
 399         case 8:
 400                 info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
 401                 break;
 402
 403         case 16:
 404                 info->fix.visual = FB_VISUAL_TRUECOLOR;
 405                 break;
 406
 407         case 32:
 408                 info->fix.visual = FB_VISUAL_TRUECOLOR;
 409                 break;
 410         }
 411
 412         /* allocate fb memory within 501 */
 413         info->fix.line_length = (var->xres_virtual * var->bits_per_pixel)/8;
 414         info->fix.smem_len    = info->fix.line_length * var->yres_virtual;
 415
 416         dev_dbg(fbi->dev, "%s: line length = %u\n", __func__,
 417                 info->fix.line_length);
 418
 419         if (sm501_alloc_mem(fbi, &par->screen, mem_type,
 420                             info->fix.smem_len)) {
 421                 dev_err(fbi->dev, "no memory available\n");
 422                 return -ENOMEM;
 423         }
 424
 425         info->fix.smem_start = fbi->fbmem_res->start + par->screen.sm_addr;
 426
 427         info->screen_base = fbi->fbmem + par->screen.sm_addr;
 428         info->screen_size = info->fix.smem_len;
 429
 430         /* set start of framebuffer to the screen */
 431
 432         writel(par->screen.sm_addr | SM501_ADDR_FLIP, fbi->regs + head_addr);
 433
 434         /* program CRT clock  */
 435
 436         pixclock = sm501fb_ps_to_hz(var->pixclock);
 437
 438         sm501pixclock = sm501_set_clock(fbi->dev->parent, clock_type,
 439                                         pixclock);
 440
 441         /* update fb layer with actual clock used */
 442         var->pixclock = sm501fb_hz_to_ps(sm501pixclock);
 443
 444         dev_dbg(fbi->dev, "%s: pixclock(ps) = %u, pixclock(Hz)  = %lu, "
 445                "sm501pixclock = %lu,  error = %ld%%\n",
 446                __func__, var->pixclock, pixclock, sm501pixclock,
 447                ((pixclock - sm501pixclock)*100)/pixclock);
 448
 449         return 0;
 450 }
 451
 452 /* sm501fb_set_par_geometry
 453  *
 454  * set the geometry registers for specified framebuffer.
 455 */
 456
 457 static void sm501fb_set_par_geometry(struct fb_info *info,
 458                                      struct fb_var_screeninfo *var)
 459 {
 460         struct sm501fb_par  *par = info->par;
 461         struct sm501fb_info *fbi = par->info;
 462         void __iomem *base = fbi->regs;
 463         unsigned long reg;
 464
 465         if (par->head == HEAD_CRT)
 466                 base += SM501_DC_CRT_H_TOT;
 467         else
 468                 base += SM501_DC_PANEL_H_TOT;
 469
 470         /* set framebuffer width and display width */
 471
 472         reg = info->fix.line_length;
 473         reg |= ((var->xres * var->bits_per_pixel)/8) << 16;
 474
 475         writel(reg, fbi->regs + (par->head == HEAD_CRT ?
 476                     SM501_DC_CRT_FB_OFFSET :  SM501_DC_PANEL_FB_OFFSET));
 477
 478         /* program horizontal total */
 479
 480         reg  = (h_total(var) - 1) << 16;
 481         reg |= (var->xres - 1);
 482
 483         writel(reg, base + SM501_OFF_DC_H_TOT);
 484
 485         /* program horizontal sync */
 486
 487         reg  = var->hsync_len << 16;
 488         reg |= var->xres + var->right_margin - 1;
 489
 490         writel(reg, base + SM501_OFF_DC_H_SYNC);
 491
 492         /* program vertical total */
 493
 494         reg  = (v_total(var) - 1) << 16;
 495         reg |= (var->yres - 1);
 496
 497         writel(reg, base + SM501_OFF_DC_V_TOT);
 498
 499         /* program vertical sync */
 500         reg  = var->vsync_len << 16;
 501         reg |= var->yres + var->lower_margin - 1;
 502
 503         writel(reg, base + SM501_OFF_DC_V_SYNC);
 504 }
 505
 506 /* sm501fb_pan_crt
 507  *
 508  * pan the CRT display output within an virtual framebuffer
 509 */
 510
 511 static int sm501fb_pan_crt(struct fb_var_screeninfo *var,
 512                            struct fb_info *info)
 513 {
 514         struct sm501fb_par  *par = info->par;
 515         struct sm501fb_info *fbi = par->info;
 516         unsigned int bytes_pixel = var->bits_per_pixel / 8;
 517         unsigned long reg;
 518         unsigned long xoffs;
 519
 520         xoffs = var->xoffset * bytes_pixel;
 521
 522         reg = readl(fbi->regs + SM501_DC_CRT_CONTROL);
 523
 524         reg &= ~SM501_DC_CRT_CONTROL_PIXEL_MASK;
 525         reg |= ((xoffs & 15) / bytes_pixel) << 4;
 526         writel(reg, fbi->regs + SM501_DC_CRT_CONTROL);
 527
 528         reg = (par->screen.sm_addr + xoffs +
 529                var->yoffset * info->fix.line_length);
 530         writel(reg | SM501_ADDR_FLIP, fbi->regs + SM501_DC_CRT_FB_ADDR);
 531
 532         sm501fb_sync_regs(fbi);
 533         return 0;
 534 }
 535
 536 /* sm501fb_pan_pnl
 537  *
 538  * pan the panel display output within an virtual framebuffer
 539 */
 540
 541 static int sm501fb_pan_pnl(struct fb_var_screeninfo *var,
 542                            struct fb_info *info)
 543 {
 544         struct sm501fb_par  *par = info->par;
 545         struct sm501fb_info *fbi = par->info;
 546         unsigned long reg;
 547
 548         reg = var->xoffset | (var->xres_virtual << 16);
 549         writel(reg, fbi->regs + SM501_DC_PANEL_FB_WIDTH);
 550
 551         reg = var->yoffset | (var->yres_virtual << 16);
 552         writel(reg, fbi->regs + SM501_DC_PANEL_FB_HEIGHT);
 553
 554         sm501fb_sync_regs(fbi);
 555         return 0;
 556 }
 557
 558 /* sm501fb_set_par_crt
 559  *
 560  * Set the CRT video mode from the fb_info structure
 561 */
 562
 563 static int sm501fb_set_par_crt(struct fb_info *info)
 564 {
 565         struct sm501fb_par  *par = info->par;
 566         struct sm501fb_info *fbi = par->info;
 567         struct fb_var_screeninfo *var = &info->var;
 568         unsigned long control;       /* control register */
 569         int ret;
 570
 571         /* activate new configuration */
 572
 573         dev_dbg(fbi->dev, "%s(%p)\n", __func__, info);
 574
 575         /* enable CRT DAC - note 0 is on!*/
 576         sm501_misc_control(fbi->dev->parent, 0, SM501_MISC_DAC_POWER);
 577
 578         control = readl(fbi->regs + SM501_DC_CRT_CONTROL);
 579
 580         control &= (SM501_DC_CRT_CONTROL_PIXEL_MASK |
 581                     SM501_DC_CRT_CONTROL_GAMMA |
 582                     SM501_DC_CRT_CONTROL_BLANK |
 583                     SM501_DC_CRT_CONTROL_SEL |
 584                     SM501_DC_CRT_CONTROL_CP |
 585                     SM501_DC_CRT_CONTROL_TVP);
 586
 587         /* set the sync polarities before we check data source  */
 588
 589         if ((var->sync & FB_SYNC_HOR_HIGH_ACT) == 0)
 590                 control |= SM501_DC_CRT_CONTROL_HSP;
 591
 592         if ((var->sync & FB_SYNC_VERT_HIGH_ACT) == 0)
 593                 control |= SM501_DC_CRT_CONTROL_VSP;
 594
 595         if ((control & SM501_DC_CRT_CONTROL_SEL) == 0) {
 596                 /* the head is displaying panel data... */
 597
 598                 sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0);
 599                 goto out_update;
 600         }
 601
 602         ret = sm501fb_set_par_common(info, var);
 603         if (ret) {
 604                 dev_err(fbi->dev, "failed to set common parameters\n");
 605                 return ret;
 606         }
 607
 608         sm501fb_pan_crt(var, info);
 609         sm501fb_set_par_geometry(info, var);
 610
 611         control |= SM501_FIFO_3;        /* fill if >3 free slots */
 612
 613         switch(var->bits_per_pixel) {
 614         case 8:
 615                 control |= SM501_DC_CRT_CONTROL_8BPP;
 616                 break;
 617
 618         case 16:
 619                 control |= SM501_DC_CRT_CONTROL_16BPP;
 620                 sm501fb_setup_gamma(fbi, SM501_DC_CRT_PALETTE);
 621                 break;
 622
 623         case 32:
 624                 control |= SM501_DC_CRT_CONTROL_32BPP;
 625                 sm501fb_setup_gamma(fbi, SM501_DC_CRT_PALETTE);
 626                 break;
 627
 628         default:
 629                 BUG();
 630         }
 631
 632         control |= SM501_DC_CRT_CONTROL_SEL;    /* CRT displays CRT data */
 633         control |= SM501_DC_CRT_CONTROL_TE;     /* enable CRT timing */
 634         control |= SM501_DC_CRT_CONTROL_ENABLE; /* enable CRT plane */
 635
 636  out_update:
 637         dev_dbg(fbi->dev, "new control is %08lx\n", control);
 638
 639         writel(control, fbi->regs + SM501_DC_CRT_CONTROL);
 640         sm501fb_sync_regs(fbi);
 641
 642         return 0;
 643 }
 644
 645 static void sm501fb_panel_power(struct sm501fb_info *fbi, int to)
 646 {
 647         unsigned long control;
 648         void __iomem *ctrl_reg = fbi->regs + SM501_DC_PANEL_CONTROL;
 649         struct sm501_platdata_fbsub *pd = fbi->pdata->fb_pnl;
 650
 651         control = readl(ctrl_reg);
 652
 653         if (to && (control & SM501_DC_PANEL_CONTROL_VDD) == 0) {
 654                 /* enable panel power */
 655
 656                 control |= SM501_DC_PANEL_CONTROL_VDD;  /* FPVDDEN */
 657                 writel(control, ctrl_reg);
 658                 sm501fb_sync_regs(fbi);
 659                 mdelay(10);
 660
 661                 control |= SM501_DC_PANEL_CONTROL_DATA; /* DATA */
 662                 writel(control, ctrl_reg);
 663                 sm501fb_sync_regs(fbi);
 664                 mdelay(10);
 665
 666                 if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) {
 667                         control |= SM501_DC_PANEL_CONTROL_BIAS; /* VBIASEN */
 668                         writel(control, ctrl_reg);
 669                         sm501fb_sync_regs(fbi);
 670                         mdelay(10);
 671                 }
 672
 673                 if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) {
 674                         control |= SM501_DC_PANEL_CONTROL_FPEN;
 675                         writel(control, ctrl_reg);
 676                         sm501fb_sync_regs(fbi);
 677                         mdelay(10);
 678                 }
 679         } else if (!to && (control & SM501_DC_PANEL_CONTROL_VDD) != 0) {
 680                 /* disable panel power */
 681                 if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) {
 682                         control &= ~SM501_DC_PANEL_CONTROL_FPEN;
 683                         writel(control, ctrl_reg);
 684                         sm501fb_sync_regs(fbi);
 685                         mdelay(10);
 686                 }
 687
 688                 if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) {
 689                         control &= ~SM501_DC_PANEL_CONTROL_BIAS;
 690                         writel(control, ctrl_reg);
 691                         sm501fb_sync_regs(fbi);
 692                         mdelay(10);
 693                 }
 694
 695                 control &= ~SM501_DC_PANEL_CONTROL_DATA;
 696                 writel(control, ctrl_reg);
 697                 sm501fb_sync_regs(fbi);
 698                 mdelay(10);
 699
 700                 control &= ~SM501_DC_PANEL_CONTROL_VDD;
 701                 writel(control, ctrl_reg);
 702                 sm501fb_sync_regs(fbi);
 703                 mdelay(10);
 704         }
 705
 706         sm501fb_sync_regs(fbi);
 707 }
 708
 709 /* sm501fb_set_par_pnl
 710  *
 711  * Set the panel video mode from the fb_info structure
 712 */
 713
 714 static int sm501fb_set_par_pnl(struct fb_info *info)
 715 {
 716         struct sm501fb_par  *par = info->par;
 717         struct sm501fb_info *fbi = par->info;
 718         struct fb_var_screeninfo *var = &info->var;
 719         unsigned long control;
 720         unsigned long reg;
 721         int ret;
 722
 723         dev_dbg(fbi->dev, "%s(%p)\n", __func__, info);
 724
 725         /* activate this new configuration */
 726
 727         ret = sm501fb_set_par_common(info, var);
 728         if (ret)
 729                 return ret;
 730
 731         sm501fb_pan_pnl(var, info);
 732         sm501fb_set_par_geometry(info, var);
 733
 734         /* update control register */
 735
 736         control = readl(fbi->regs + SM501_DC_PANEL_CONTROL);
 737         control &= (SM501_DC_PANEL_CONTROL_GAMMA |
 738                     SM501_DC_PANEL_CONTROL_VDD  |
 739                     SM501_DC_PANEL_CONTROL_DATA |
 740                     SM501_DC_PANEL_CONTROL_BIAS |
 741                     SM501_DC_PANEL_CONTROL_FPEN |
 742                     SM501_DC_PANEL_CONTROL_CP |
 743                     SM501_DC_PANEL_CONTROL_CK |
 744                     SM501_DC_PANEL_CONTROL_HP |
 745                     SM501_DC_PANEL_CONTROL_VP |
 746                     SM501_DC_PANEL_CONTROL_HPD |
 747                     SM501_DC_PANEL_CONTROL_VPD);
 748
 749         control |= SM501_FIFO_3;        /* fill if >3 free slots */
 750
 751         switch(var->bits_per_pixel) {
 752         case 8:
 753                 control |= SM501_DC_PANEL_CONTROL_8BPP;
 754                 break;
 755
 756         case 16:
 757                 control |= SM501_DC_PANEL_CONTROL_16BPP;
 758                 sm501fb_setup_gamma(fbi, SM501_DC_PANEL_PALETTE);
 759                 break;
 760
 761         case 32:
 762                 control |= SM501_DC_PANEL_CONTROL_32BPP;
 763                 sm501fb_setup_gamma(fbi, SM501_DC_PANEL_PALETTE);
 764                 break;
 765
 766         default:
 767                 BUG();
 768         }
 769
 770         writel(0x0, fbi->regs + SM501_DC_PANEL_PANNING_CONTROL);
 771
 772         /* panel plane top left and bottom right location */
 773
 774         writel(0x00, fbi->regs + SM501_DC_PANEL_TL_LOC);
 775
 776         reg  = var->xres - 1;
 777         reg |= (var->yres - 1) << 16;
 778
 779         writel(reg, fbi->regs + SM501_DC_PANEL_BR_LOC);
 780
 781         /* program panel control register */
 782
 783         control |= SM501_DC_PANEL_CONTROL_TE;   /* enable PANEL timing */
 784         control |= SM501_DC_PANEL_CONTROL_EN;   /* enable PANEL gfx plane */
 785
 786         if ((var->sync & FB_SYNC_HOR_HIGH_ACT) == 0)
 787                 control |= SM501_DC_PANEL_CONTROL_HSP;
 788
 789         if ((var->sync & FB_SYNC_VERT_HIGH_ACT) == 0)
 790                 control |= SM501_DC_PANEL_CONTROL_VSP;
 791
 792         writel(control, fbi->regs + SM501_DC_PANEL_CONTROL);
 793         sm501fb_sync_regs(fbi);
 794
 795         /* ensure the panel interface is not tristated at this point */
 796
 797         sm501_modify_reg(fbi->dev->parent, SM501_SYSTEM_CONTROL,
 798                          0, SM501_SYSCTRL_PANEL_TRISTATE);
 799
 800         /* power the panel up */
 801         sm501fb_panel_power(fbi, 1);
 802         return 0;
 803 }
 804
 805
 806 /* chan_to_field
 807  *
 808  * convert a colour value into a field position
 809  *
 810  * from pxafb.c
 811 */
 812
 813 static inline unsigned int chan_to_field(unsigned int chan,
 814                                          struct fb_bitfield *bf)
 815 {
 816         chan &= 0xffff;
 817         chan >>= 16 - bf->length;
 818         return chan << bf->offset;
 819 }
 820
 821 /* sm501fb_setcolreg
 822  *
 823  * set the colour mapping for modes that support palettised data
 824 */
 825
 826 static int sm501fb_setcolreg(unsigned regno,
 827                              unsigned red, unsigned green, unsigned blue,
 828                              unsigned transp, struct fb_info *info)
 829 {
 830         struct sm501fb_par  *par = info->par;
 831         struct sm501fb_info *fbi = par->info;
 832         void __iomem *base = fbi->regs;
 833         unsigned int val;
 834
 835         if (par->head == HEAD_CRT)
 836                 base += SM501_DC_CRT_PALETTE;
 837         else
 838                 base += SM501_DC_PANEL_PALETTE;
 839
 840         switch (info->fix.visual) {
 841         case FB_VISUAL_TRUECOLOR:
 842                 /* true-colour, use pseuo-palette */
 843
 844                 if (regno < 16) {
 845                         u32 *pal = par->pseudo_palette;
 846
 847                         val  = chan_to_field(red,   &info->var.red);
 848                         val |= chan_to_field(green, &info->var.green);
 849                         val |= chan_to_field(blue,  &info->var.blue);
 850
 851                         pal[regno] = val;
 852                 }
 853                 break;
 854
 855         case FB_VISUAL_PSEUDOCOLOR:
 856                 if (regno < 256) {
 857                         val = (red >> 8) << 16;
 858                         val |= (green >> 8) << 8;
 859                         val |= blue >> 8;
 860
 861                         writel(val, base + (regno * 4));
 862                 }
 863
 864                 break;
 865
 866         default:
 867                 return 1;   /* unknown type */
 868         }
 869
 870         return 0;
 871 }
 872
 873 /* sm501fb_blank_pnl
 874  *
 875  * Blank or un-blank the panel interface
 876 */
 877
 878 static int sm501fb_blank_pnl(int blank_mode, struct fb_info *info)
 879 {
 880         struct sm501fb_par  *par = info->par;
 881         struct sm501fb_info *fbi = par->info;
 882
 883         dev_dbg(fbi->dev, "%s(mode=%d, %p)\n", __func__, blank_mode, info);
 884
 885         switch (blank_mode) {
 886         case FB_BLANK_POWERDOWN:
 887                 sm501fb_panel_power(fbi, 0);
 888                 break;
 889
 890         case FB_BLANK_UNBLANK:
 891                 sm501fb_panel_power(fbi, 1);
 892                 break;
 893
 894         case FB_BLANK_NORMAL:
 895         case FB_BLANK_VSYNC_SUSPEND:
 896         case FB_BLANK_HSYNC_SUSPEND:
 897         default:
 898                 return 1;
 899         }
 900
 901         return 0;
 902 }
 903
 904 /* sm501fb_blank_crt
 905  *
 906  * Blank or un-blank the crt interface
 907 */
 908
 909 static int sm501fb_blank_crt(int blank_mode, struct fb_info *info)
 910 {
 911         struct sm501fb_par  *par = info->par;
 912         struct sm501fb_info *fbi = par->info;
 913         unsigned long ctrl;
 914
 915         dev_dbg(fbi->dev, "%s(mode=%d, %p)\n", __func__, blank_mode, info);
 916
 917         ctrl = readl(fbi->regs + SM501_DC_CRT_CONTROL);
 918
 919         switch (blank_mode) {
 920         case FB_BLANK_POWERDOWN:
 921                 ctrl &= ~SM501_DC_CRT_CONTROL_ENABLE;
 922                 sm501_misc_control(fbi->dev->parent, SM501_MISC_DAC_POWER, 0);
 923
 924         case FB_BLANK_NORMAL:
 925                 ctrl |= SM501_DC_CRT_CONTROL_BLANK;
 926                 break;
 927
 928         case FB_BLANK_UNBLANK:
 929                 ctrl &= ~SM501_DC_CRT_CONTROL_BLANK;
 930                 ctrl |=  SM501_DC_CRT_CONTROL_ENABLE;
 931                 sm501_misc_control(fbi->dev->parent, 0, SM501_MISC_DAC_POWER);
 932                 break;
 933
 934         case FB_BLANK_VSYNC_SUSPEND:
 935         case FB_BLANK_HSYNC_SUSPEND:
 936         default:
 937                 return 1;
 938
 939         }
 940
 941         writel(ctrl, fbi->regs + SM501_DC_CRT_CONTROL);
 942         sm501fb_sync_regs(fbi);
 943
 944         return 0;
 945 }
 946
 947 /* sm501fb_cursor
 948  *
 949  * set or change the hardware cursor parameters
 950 */
 951
 952 static int sm501fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 953 {
 954         struct sm501fb_par  *par = info->par;
 955         struct sm501fb_info *fbi = par->info;
 956         void __iomem *base = fbi->regs;
 957         unsigned long hwc_addr;
 958         unsigned long fg, bg;
 959
 960         dev_dbg(fbi->dev, "%s(%p,%p)\n", __func__, info, cursor);
 961
 962         if (par->head == HEAD_CRT)
 963                 base += SM501_DC_CRT_HWC_BASE;
 964         else
 965                 base += SM501_DC_PANEL_HWC_BASE;
 966
 967         /* check not being asked to exceed capabilities */
 968
 969         if (cursor->image.width > 64)
 970                 return -EINVAL;
 971
 972         if (cursor->image.height > 64)
 973                 return -EINVAL;
 974
 975         if (cursor->image.depth > 1)
 976                 return -EINVAL;
 977
 978         hwc_addr = readl(base + SM501_OFF_HWC_ADDR);
 979
 980         if (cursor->enable)
 981                 writel(hwc_addr | SM501_HWC_EN, base + SM501_OFF_HWC_ADDR);
 982         else
 983                 writel(hwc_addr & ~SM501_HWC_EN, base + SM501_OFF_HWC_ADDR);
 984
 985         /* set data */
 986         if (cursor->set & FB_CUR_SETPOS) {
 987                 unsigned int x = cursor->image.dx;
 988                 unsigned int y = cursor->image.dy;
 989
 990                 if (x >= 2048 || y >= 2048 )
 991                         return -EINVAL;
 992
 993                 dev_dbg(fbi->dev, "set position %d,%d\n", x, y);
 994
 995                 //y += cursor->image.height;
 996
 997                 writel(x | (y << 16), base + SM501_OFF_HWC_LOC);
 998         }
 999
1000         if (cursor->set & FB_CUR_SETCMAP) {
1001                 unsigned int bg_col = cursor->image.bg_color;
1002                 unsigned int fg_col = cursor->image.fg_color;
1003
1004                 dev_dbg(fbi->dev, "%s: update cmap (%08x,%08x)\n",
1005                         __func__, bg_col, fg_col);
1006
1007                 bg = ((info->cmap.red[bg_col] & 0xF8) << 8) |
1008                         ((info->cmap.green[bg_col] & 0xFC) << 3) |
1009                         ((info->cmap.blue[bg_col] & 0xF8) >> 3);
1010
1011                 fg = ((info->cmap.red[fg_col] & 0xF8) << 8) |
1012                         ((info->cmap.green[fg_col] & 0xFC) << 3) |
1013                         ((info->cmap.blue[fg_col] & 0xF8) >> 3);
1014
1015                 dev_dbg(fbi->dev, "fgcol %08lx, bgcol %08lx\n", fg, bg);
1016
1017                 writel(bg, base + SM501_OFF_HWC_COLOR_1_2);
1018                 writel(fg, base + SM501_OFF_HWC_COLOR_3);
1019         }
1020
1021         if (cursor->set & FB_CUR_SETSIZE ||
1022             cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE)) {
1023                 /* SM501 cursor is a two bpp 64x64 bitmap this routine
1024                  * clears it to transparent then combines the cursor
1025                  * shape plane with the colour plane to set the
1026                  * cursor */
1027                 int x, y;
1028                 const unsigned char *pcol = cursor->image.data;
1029                 const unsigned char *pmsk = cursor->mask;
1030                 void __iomem   *dst = par->cursor.k_addr;
1031                 unsigned char  dcol = 0;
1032                 unsigned char  dmsk = 0;
1033                 unsigned int   op;
1034
1035                 dev_dbg(fbi->dev, "%s: setting shape (%d,%d)\n",
1036                         __func__, cursor->image.width, cursor->image.height);
1037
1038                 for (op = 0; op < (64*64*2)/8; op+=4)
1039                         writel(0x0, dst + op);
1040
1041                 for (y = 0; y < cursor->image.height; y++) {
1042                         for (x = 0; x < cursor->image.width; x++) {
1043                                 if ((x % 8) == 0) {
1044                                         dcol = *pcol++;
1045                                         dmsk = *pmsk++;
1046                                 } else {
1047                                         dcol >>= 1;
1048                                         dmsk >>= 1;
1049                                 }
1050
1051                                 if (dmsk & 1) {
1052                                         op = (dcol & 1) ? 1 : 3;
1053                                         op <<= ((x % 4) * 2);
1054
1055                                         op |= readb(dst + (x / 4));
1056                                         writeb(op, dst + (x / 4));
1057                                 }
1058                         }
1059                         dst += (64*2)/8;
1060                 }
1061         }
1062
1063         sm501fb_sync_regs(fbi); /* ensure cursor data flushed */
1064         return 0;
1065 }
1066
1067 /* sm501fb_crtsrc_show
1068  *
1069  * device attribute code to show where the crt output is sourced from
1070 */
1071
1072 static ssize_t sm501fb_crtsrc_show(struct device *dev,
1073                                struct device_attribute *attr, char *buf)
1074 {
1075         struct sm501fb_info *info = dev_get_drvdata(dev);
1076         unsigned long ctrl;
1077
1078         ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1079         ctrl &= SM501_DC_CRT_CONTROL_SEL;
1080
1081         return snprintf(buf, PAGE_SIZE, "%s\n", ctrl ? "crt" : "panel");
1082 }
1083
1084 /* sm501fb_crtsrc_show
1085  *
1086  * device attribute code to set where the crt output is sourced from
1087 */
1088
1089 static ssize_t sm501fb_crtsrc_store(struct device *dev,
1090                                 struct device_attribute *attr,
1091                                 const char *buf, size_t len)
1092 {
1093         struct sm501fb_info *info = dev_get_drvdata(dev);
1094         enum sm501_controller head;
1095         unsigned long ctrl;
1096
1097         if (len < 1)
1098                 return -EINVAL;
1099
1100         if (strnicmp(buf, "crt", 3) == 0)
1101                 head = HEAD_CRT;
1102         else if (strnicmp(buf, "panel", 5) == 0)
1103                 head = HEAD_PANEL;
1104         else
1105                 return -EINVAL;
1106
1107         dev_info(dev, "setting crt source to head %d\n", head);
1108
1109         ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1110
1111         if (head == HEAD_CRT) {
1112                 ctrl |= SM501_DC_CRT_CONTROL_SEL;
1113                 ctrl |= SM501_DC_CRT_CONTROL_ENABLE;
1114                 ctrl |= SM501_DC_CRT_CONTROL_TE;
1115         } else {
1116                 ctrl &= ~SM501_DC_CRT_CONTROL_SEL;
1117                 ctrl &= ~SM501_DC_CRT_CONTROL_ENABLE;
1118                 ctrl &= ~SM501_DC_CRT_CONTROL_TE;
1119         }
1120
1121         writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
1122         sm501fb_sync_regs(info);
1123
1124         return len;
1125 }
1126
1127 /* Prepare the device_attr for registration with sysfs later */
1128 static DEVICE_ATTR(crt_src, 0666, sm501fb_crtsrc_show, sm501fb_crtsrc_store);
1129
1130 /* sm501fb_show_regs
1131  *
1132  * show the primary sm501 registers
1133 */
1134 static int sm501fb_show_regs(struct sm501fb_info *info, char *ptr,
1135                              unsigned int start, unsigned int len)
1136 {
1137         void __iomem *mem = info->regs;
1138         char *buf = ptr;
1139         unsigned int reg;
1140
1141         for (reg = start; reg < (len + start); reg += 4)
1142                 ptr += sprintf(ptr, "%08x = %08x\n", reg, readl(mem + reg));
1143
1144         return ptr - buf;
1145 }
1146
1147 /* sm501fb_debug_show_crt
1148  *
1149  * show the crt control and cursor registers
1150 */
1151
1152 static ssize_t sm501fb_debug_show_crt(struct device *dev,
1153                                   struct device_attribute *attr, char *buf)
1154 {
1155         struct sm501fb_info *info = dev_get_drvdata(dev);
1156         char *ptr = buf;
1157
1158         ptr += sm501fb_show_regs(info, ptr, SM501_DC_CRT_CONTROL, 0x40);
1159         ptr += sm501fb_show_regs(info, ptr, SM501_DC_CRT_HWC_BASE, 0x10);
1160
1161         return ptr - buf;
1162 }
1163
1164 static DEVICE_ATTR(fbregs_crt, 0444, sm501fb_debug_show_crt, NULL);
1165
1166 /* sm501fb_debug_show_pnl
1167  *
1168  * show the panel control and cursor registers
1169 */
1170
1171 static ssize_t sm501fb_debug_show_pnl(struct device *dev,
1172                                   struct device_attribute *attr, char *buf)
1173 {
1174         struct sm501fb_info *info = dev_get_drvdata(dev);
1175         char *ptr = buf;
1176
1177         ptr += sm501fb_show_regs(info, ptr, 0x0, 0x40);
1178         ptr += sm501fb_show_regs(info, ptr, SM501_DC_PANEL_HWC_BASE, 0x10);
1179
1180         return ptr - buf;
1181 }
1182
1183 static DEVICE_ATTR(fbregs_pnl, 0444, sm501fb_debug_show_pnl, NULL);
1184
1185 /* framebuffer ops */
1186
1187 static struct fb_ops sm501fb_ops_crt = {
1188         .owner          = THIS_MODULE,
1189         .fb_check_var   = sm501fb_check_var_crt,
1190         .fb_set_par     = sm501fb_set_par_crt,
1191         .fb_blank       = sm501fb_blank_crt,
1192         .fb_setcolreg   = sm501fb_setcolreg,
1193         .fb_pan_display = sm501fb_pan_crt,
1194         .fb_cursor      = sm501fb_cursor,
1195         .fb_fillrect    = cfb_fillrect,
1196         .fb_copyarea    = cfb_copyarea,
1197         .fb_imageblit   = cfb_imageblit,
1198 };
1199
1200 static struct fb_ops sm501fb_ops_pnl = {
1201         .owner          = THIS_MODULE,
1202         .fb_check_var   = sm501fb_check_var_pnl,
1203         .fb_set_par     = sm501fb_set_par_pnl,
1204         .fb_pan_display = sm501fb_pan_pnl,
1205         .fb_blank       = sm501fb_blank_pnl,
1206         .fb_setcolreg   = sm501fb_setcolreg,
1207         .fb_cursor      = sm501fb_cursor,
1208         .fb_fillrect    = cfb_fillrect,
1209         .fb_copyarea    = cfb_copyarea,
1210         .fb_imageblit   = cfb_imageblit,
1211 };
1212
1213 /* sm501fb_info_alloc
1214  *
1215  * creates and initialises an sm501fb_info structure
1216 */
1217
1218 static struct sm501fb_info *sm501fb_info_alloc(struct fb_info *fbinfo_crt,
1219                                                struct fb_info *fbinfo_pnl)
1220 {
1221         struct sm501fb_info *info;
1222         struct sm501fb_par  *par;
1223
1224         info = kzalloc(sizeof(struct sm501fb_info), GFP_KERNEL);
1225         if (info) {
1226                 /* set the references back */
1227
1228                 par = fbinfo_crt->par;
1229                 par->info = info;
1230                 par->head = HEAD_CRT;
1231                 fbinfo_crt->pseudo_palette = &par->pseudo_palette;
1232
1233                 par = fbinfo_pnl->par;
1234                 par->info = info;
1235                 par->head = HEAD_PANEL;
1236                 fbinfo_pnl->pseudo_palette = &par->pseudo_palette;
1237
1238                 /* store the two fbs into our info */
1239                 info->fb[HEAD_CRT] = fbinfo_crt;
1240                 info->fb[HEAD_PANEL] = fbinfo_pnl;
1241         }
1242
1243         return info;
1244 }
1245
1246 /* sm501_init_cursor
1247  *
1248  * initialise hw cursor parameters
1249 */
1250
1251 static int sm501_init_cursor(struct fb_info *fbi, unsigned int reg_base)
1252 {
1253         struct sm501fb_par *par = fbi->par;
1254         struct sm501fb_info *info = par->info;
1255         int ret;
1256
1257         par->cursor_regs = info->regs + reg_base;
1258
1259         ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024);
1260         if (ret < 0)
1261                 return ret;
1262
1263         /* initialise the colour registers */
1264
1265         writel(par->cursor.sm_addr, par->cursor_regs + SM501_OFF_HWC_ADDR);
1266
1267         writel(0x00, par->cursor_regs + SM501_OFF_HWC_LOC);
1268         writel(0x00, par->cursor_regs + SM501_OFF_HWC_COLOR_1_2);
1269         writel(0x00, par->cursor_regs + SM501_OFF_HWC_COLOR_3);
1270         sm501fb_sync_regs(info);
1271
1272         return 0;
1273 }
1274
1275 /* sm501fb_info_start
1276  *
1277  * fills the par structure claiming resources and remapping etc.
1278 */
1279
1280 static int sm501fb_start(struct sm501fb_info *info,
1281                          struct platform_device *pdev)
1282 {
1283         struct resource *res;
1284         struct device *dev;
1285         int k;
1286         int ret;
1287
1288         info->dev = dev = &pdev->dev;
1289         platform_set_drvdata(pdev, info);
1290
1291         info->irq = ret = platform_get_irq(pdev, 0);
1292         if (ret < 0) {
1293                 /* we currently do not use the IRQ */
1294                 dev_warn(dev, "no irq for device\n");
1295         }
1296
1297         /* allocate, reserve and remap resources for registers */
1298         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1299         if (res == NULL) {
1300                 dev_err(dev, "no resource definition for registers\n");
1301                 ret = -ENOENT;
1302                 goto err_release;
1303         }
1304
1305         info->regs_res = request_mem_region(res->start,
1306                                             res->end - res->start,
1307                                             pdev->name);
1308
1309         if (info->regs_res == NULL) {
1310                 dev_err(dev, "cannot claim registers\n");
1311                 ret = -ENXIO;
1312                 goto err_release;
1313         }
1314
1315         info->regs = ioremap(res->start, (res->end - res->start)+1);
1316         if (info->regs == NULL) {
1317                 dev_err(dev, "cannot remap registers\n");
1318                 ret = -ENXIO;
1319                 goto err_regs_res;
1320         }
1321
1322         /* allocate, reserve resources for framebuffer */
1323         res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
1324         if (res == NULL) {
1325                 dev_err(dev, "no memory resource defined\n");
1326                 ret = -ENXIO;
1327                 goto err_regs_map;
1328         }
1329
1330         info->fbmem_res = request_mem_region(res->start,
1331                                              (res->end - res->start)+1,
1332                                              pdev->name);
1333         if (info->fbmem_res == NULL) {
1334                 dev_err(dev, "cannot claim framebuffer\n");
1335                 ret = -ENXIO;
1336                 goto err_regs_map;
1337         }
1338
1339         info->fbmem = ioremap(res->start, (res->end - res->start)+1);
1340         if (info->fbmem == NULL) {
1341                 dev_err(dev, "cannot remap framebuffer\n");
1342                 goto err_mem_res;
1343         }
1344
1345         info->fbmem_len = (res->end - res->start)+1;
1346
1347         /* clear framebuffer memory - avoids garbage data on unused fb */
1348         memset(info->fbmem, 0, info->fbmem_len);
1349
1350         /* clear palette ram - undefined at power on */
1351         for (k = 0; k < (256 * 3); k++)
1352                 writel(0, info->regs + SM501_DC_PANEL_PALETTE + (k * 4));
1353
1354         /* enable display controller */
1355         sm501_unit_power(dev->parent, SM501_GATE_DISPLAY, 1);
1356
1357         /* setup cursors */
1358
1359         sm501_init_cursor(info->fb[HEAD_CRT], SM501_DC_CRT_HWC_ADDR);
1360         sm501_init_cursor(info->fb[HEAD_PANEL], SM501_DC_PANEL_HWC_ADDR);
1361
1362         return 0; /* everything is setup */
1363
1364  err_mem_res:
1365         release_resource(info->fbmem_res);
1366         kfree(info->fbmem_res);
1367
1368  err_regs_map:
1369         iounmap(info->regs);
1370
1371  err_regs_res:
1372         release_resource(info->regs_res);
1373         kfree(info->regs_res);
1374
1375  err_release:
1376         return ret;
1377 }
1378
1379 static void sm501fb_stop(struct sm501fb_info *info)
1380 {
1381         /* disable display controller */
1382         sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 0);
1383
1384         iounmap(info->fbmem);
1385         release_resource(info->fbmem_res);
1386         kfree(info->fbmem_res);
1387
1388         iounmap(info->regs);
1389         release_resource(info->regs_res);
1390         kfree(info->regs_res);
1391 }
1392
1393 static void sm501fb_info_release(struct sm501fb_info *info)
1394 {
1395         kfree(info);
1396 }
1397
1398 static int sm501fb_init_fb(struct fb_info *fb,
1399                            enum sm501_controller head,
1400                            const char *fbname)
1401 {
1402         struct sm501_platdata_fbsub *pd;
1403         struct sm501fb_par *par = fb->par;
1404         struct sm501fb_info *info = par->info;
1405         unsigned long ctrl;
1406         unsigned int enable;
1407         int ret;
1408
1409         switch (head) {
1410         case HEAD_CRT:
1411                 pd = info->pdata->fb_crt;
1412                 ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1413                 enable = (ctrl & SM501_DC_CRT_CONTROL_ENABLE) ? 1 : 0;
1414
1415                 /* ensure we set the correct source register */
1416                 if (info->pdata->fb_route != SM501_FB_CRT_PANEL) {
1417                         ctrl |= SM501_DC_CRT_CONTROL_SEL;
1418                         writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
1419                 }
1420
1421                 break;
1422
1423         case HEAD_PANEL:
1424                 pd = info->pdata->fb_pnl;
1425                 ctrl = readl(info->regs + SM501_DC_PANEL_CONTROL);
1426                 enable = (ctrl & SM501_DC_PANEL_CONTROL_EN) ? 1 : 0;
1427                 break;
1428
1429         default:
1430                 pd = NULL;              /* stop compiler warnings */
1431                 ctrl = 0;
1432                 enable = 0;
1433                 BUG();
1434         }
1435
1436         dev_info(info->dev, "fb %s %sabled at start\n",
1437                  fbname, enable ? "en" : "dis");
1438
1439         /* check to see if our routing allows this */
1440
1441         if (head == HEAD_CRT && info->pdata->fb_route == SM501_FB_CRT_PANEL) {
1442                 ctrl &= ~SM501_DC_CRT_CONTROL_SEL;
1443                 writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
1444                 enable = 0;
1445         }
1446
1447         strlcpy(fb->fix.id, fbname, sizeof(fb->fix.id));
1448
1449         memcpy(&par->ops,
1450                (head == HEAD_CRT) ? &sm501fb_ops_crt : &sm501fb_ops_pnl,
1451                sizeof(struct fb_ops));
1452
1453         /* update ops dependant on what we've been passed */
1454
1455         if ((pd->flags & SM501FB_FLAG_USE_HWCURSOR) == 0)
1456                 par->ops.fb_cursor = NULL;
1457
1458         fb->fbops = &par->ops;
1459         fb->flags = FBINFO_FLAG_DEFAULT |
1460                 FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
1461
1462         /* fixed data */
1463
1464         fb->fix.type            = FB_TYPE_PACKED_PIXELS;
1465         fb->fix.type_aux        = 0;
1466         fb->fix.xpanstep        = 1;
1467         fb->fix.ypanstep        = 1;
1468         fb->fix.ywrapstep       = 0;
1469         fb->fix.accel           = FB_ACCEL_NONE;
1470
1471         /* screenmode */
1472
1473         fb->var.nonstd          = 0;
1474         fb->var.activate        = FB_ACTIVATE_NOW;
1475         fb->var.accel_flags     = 0;
1476         fb->var.vmode           = FB_VMODE_NONINTERLACED;
1477         fb->var.bits_per_pixel  = 16;
1478
1479         if (enable && (pd->flags & SM501FB_FLAG_USE_INIT_MODE) && 0) {
1480                 /* TODO read the mode from the current display */
1481
1482         } else {
1483                 if (pd->def_mode) {
1484                         dev_info(info->dev, "using supplied mode\n");
1485                         fb_videomode_to_var(&fb->var, pd->def_mode);
1486
1487                         fb->var.bits_per_pixel = pd->def_bpp ? pd->def_bpp : 8;
1488                         fb->var.xres_virtual = fb->var.xres;
1489                         fb->var.yres_virtual = fb->var.yres;
1490                 } else {
1491                         ret = fb_find_mode(&fb->var, fb,
1492                                            NULL, NULL, 0, NULL, 8);
1493
1494                         if (ret == 0 || ret == 4) {
1495                                 dev_err(info->dev,
1496                                         "failed to get initial mode\n");
1497                                 return -EINVAL;
1498                         }
1499                 }
1500         }
1501
1502         /* initialise and set the palette */
1503         fb_alloc_cmap(&fb->cmap, NR_PALETTE, 0);
1504         fb_set_cmap(&fb->cmap, fb);
1505
1506         ret = (fb->fbops->fb_check_var)(&fb->var, fb);
1507         if (ret)
1508                 dev_err(info->dev, "check_var() failed on initial setup?\n");
1509
1510         /* ensure we've activated our new configuration */
1511         (fb->fbops->fb_set_par)(fb);
1512
1513         return 0;
1514 }
1515
1516 /* default platform data if none is supplied (ie, PCI device) */
1517
1518 static struct sm501_platdata_fbsub sm501fb_pdata_crt = {
1519         .flags          = (SM501FB_FLAG_USE_INIT_MODE |
1520                            SM501FB_FLAG_USE_HWCURSOR |
1521                            SM501FB_FLAG_USE_HWACCEL |
1522                            SM501FB_FLAG_DISABLE_AT_EXIT),
1523
1524 };
1525
1526 static struct sm501_platdata_fbsub sm501fb_pdata_pnl = {
1527         .flags          = (SM501FB_FLAG_USE_INIT_MODE |
1528                            SM501FB_FLAG_USE_HWCURSOR |
1529                            SM501FB_FLAG_USE_HWACCEL |
1530                            SM501FB_FLAG_DISABLE_AT_EXIT),
1531 };
1532
1533 static struct sm501_platdata_fb sm501fb_def_pdata = {
1534         .fb_route               = SM501_FB_OWN,
1535         .fb_crt                 = &sm501fb_pdata_crt,
1536         .fb_pnl                 = &sm501fb_pdata_pnl,
1537 };
1538
1539 static char driver_name_crt[] = "sm501fb-crt";
1540 static char driver_name_pnl[] = "sm501fb-panel";
1541
1542 static int __init sm501fb_probe(struct platform_device *pdev)
1543 {
1544         struct sm501fb_info *info;
1545         struct device       *dev = &pdev->dev;
1546         struct fb_info      *fbinfo_crt;
1547         struct fb_info      *fbinfo_pnl;
1548         int                  ret;
1549
1550         /* allocate our framebuffers */
1551
1552         fbinfo_crt = framebuffer_alloc(sizeof(struct sm501fb_par), dev);
1553         if (fbinfo_crt == NULL) {
1554                 dev_err(dev, "cannot allocate crt framebuffer\n");
1555                 return -ENOMEM;
1556         }
1557
1558         fbinfo_pnl = framebuffer_alloc(sizeof(struct sm501fb_par), dev);
1559         if (fbinfo_pnl == NULL) {
1560                 dev_err(dev, "cannot allocate panel framebuffer\n");
1561                 ret = -ENOMEM;
1562                 goto fbinfo_crt_alloc_fail;
1563         }
1564
1565         info = sm501fb_info_alloc(fbinfo_crt, fbinfo_pnl);
1566         if (info == NULL) {
1567                 dev_err(dev, "cannot allocate par\n");
1568                 ret = -ENOMEM;
1569                 goto sm501fb_alloc_fail;
1570         }
1571
1572         if (dev->parent->platform_data) {
1573                 struct sm501_platdata *pd = dev->parent->platform_data;
1574                 info->pdata = pd->fb;
1575         }
1576
1577         if (info->pdata == NULL) {
1578                 dev_info(dev, "using default configuration data\n");
1579                 info->pdata = &sm501fb_def_pdata;
1580         }
1581
1582         /* start the framebuffers */
1583
1584         ret = sm501fb_start(info, pdev);
1585         if (ret) {
1586                 dev_err(dev, "cannot initialise SM501\n");
1587                 goto sm501fb_start_fail;
1588         }
1589
1590         /* CRT framebuffer setup */
1591
1592         ret = sm501fb_init_fb(fbinfo_crt, HEAD_CRT, driver_name_crt);
1593         if (ret) {
1594                 dev_err(dev, "cannot initialise CRT fb\n");
1595                 goto sm501fb_start_fail;
1596         }
1597
1598         /* Panel framebuffer setup */
1599
1600         ret = sm501fb_init_fb(fbinfo_pnl, HEAD_PANEL, driver_name_pnl);
1601         if (ret) {
1602                 dev_err(dev, "cannot initialise Panel fb\n");
1603                 goto sm501fb_start_fail;
1604         }
1605
1606         /* register framebuffers */
1607
1608         ret = register_framebuffer(fbinfo_crt);
1609         if (ret < 0) {
1610                 dev_err(dev, "failed to register CRT fb (%d)\n", ret);
1611                 goto register_crt_fail;
1612         }
1613
1614         ret = register_framebuffer(fbinfo_pnl);
1615         if (ret < 0) {
1616                 dev_err(dev, "failed to register panel fb (%d)\n", ret);
1617                 goto register_pnl_fail;
1618         }
1619
1620         dev_info(dev, "fb%d: %s frame buffer device\n",
1621                  fbinfo_crt->node, fbinfo_crt->fix.id);
1622
1623         dev_info(dev, "fb%d: %s frame buffer device\n",
1624                fbinfo_pnl->node, fbinfo_pnl->fix.id);
1625
1626         /* create device files */
1627
1628         ret = device_create_file(dev, &dev_attr_crt_src);
1629         if (ret)
1630                 goto crtsrc_fail;
1631
1632         ret = device_create_file(dev, &dev_attr_fbregs_pnl);
1633         if (ret)
1634                 goto fbregs_pnl_fail;
1635
1636         ret = device_create_file(dev, &dev_attr_fbregs_crt);
1637         if (ret)
1638                 goto fbregs_crt_fail;
1639
1640         /* we registered, return ok */
1641         return 0;
1642
1643  fbregs_crt_fail:
1644         device_remove_file(dev, &dev_attr_fbregs_pnl);
1645
1646  fbregs_pnl_fail:
1647         device_remove_file(dev, &dev_attr_crt_src);
1648
1649  crtsrc_fail:
1650         unregister_framebuffer(fbinfo_pnl);
1651
1652  register_pnl_fail:
1653         unregister_framebuffer(fbinfo_crt);
1654
1655  register_crt_fail:
1656         sm501fb_stop(info);
1657
1658  sm501fb_start_fail:
1659         sm501fb_info_release(info);
1660
1661  sm501fb_alloc_fail:
1662         framebuffer_release(fbinfo_pnl);
1663
1664  fbinfo_crt_alloc_fail:
1665         framebuffer_release(fbinfo_crt);
1666
1667         return ret;
1668 }
1669
1670
1671 /*
1672  *  Cleanup
1673  */
1674 static int sm501fb_remove(struct platform_device *pdev)
1675 {
1676         struct sm501fb_info *info = platform_get_drvdata(pdev);
1677         struct fb_info     *fbinfo_crt = info->fb[0];
1678         struct fb_info     *fbinfo_pnl = info->fb[1];
1679
1680         device_remove_file(&pdev->dev, &dev_attr_fbregs_crt);
1681         device_remove_file(&pdev->dev, &dev_attr_fbregs_pnl);
1682         device_remove_file(&pdev->dev, &dev_attr_crt_src);
1683
1684         unregister_framebuffer(fbinfo_crt);
1685         unregister_framebuffer(fbinfo_pnl);
1686
1687         sm501fb_stop(info);
1688         sm501fb_info_release(info);
1689
1690         framebuffer_release(fbinfo_pnl);
1691         framebuffer_release(fbinfo_crt);
1692
1693         return 0;
1694 }
1695
1696 #ifdef CONFIG_PM
1697
1698 static int sm501fb_suspend_fb(struct sm501fb_info *info,
1699                               enum sm501_controller head)
1700 {
1701         struct fb_info *fbi = info->fb[head];
1702         struct sm501fb_par *par = fbi->par;
1703
1704         if (par->screen.size == 0)
1705                 return 0;
1706
1707         /* blank the relevant interface to ensure unit power minimised */
1708         (par->ops.fb_blank)(FB_BLANK_POWERDOWN, fbi);
1709
1710         /* tell console/fb driver we are suspending */
1711
1712         acquire_console_sem();
1713         fb_set_suspend(fbi, 1);
1714         release_console_sem();
1715
1716         /* backup copies in case chip is powered down over suspend */
1717
1718         par->store_fb = vmalloc(par->screen.size);
1719         if (par->store_fb == NULL) {
1720                 dev_err(info->dev, "no memory to store screen\n");
1721                 return -ENOMEM;
1722         }
1723
1724         par->store_cursor = vmalloc(par->cursor.size);
1725         if (par->store_cursor == NULL) {
1726                 dev_err(info->dev, "no memory to store cursor\n");
1727                 goto err_nocursor;
1728         }
1729
1730         dev_dbg(info->dev, "suspending screen to %p\n", par->store_fb);
1731         dev_dbg(info->dev, "suspending cursor to %p\n", par->store_cursor);
1732
1733         memcpy_fromio(par->store_fb, par->screen.k_addr, par->screen.size);
1734         memcpy_fromio(par->store_cursor, par->cursor.k_addr, par->cursor.size);
1735
1736         return 0;
1737
1738  err_nocursor:
1739         vfree(par->store_fb);
1740         par->store_fb = NULL;
1741
1742         return -ENOMEM;
1743 }
1744
1745 static void sm501fb_resume_fb(struct sm501fb_info *info,
1746                               enum sm501_controller head)
1747 {
1748         struct fb_info *fbi = info->fb[head];
1749         struct sm501fb_par *par = fbi->par;
1750
1751         if (par->screen.size == 0)
1752                 return;
1753
1754         /* re-activate the configuration */
1755
1756         (par->ops.fb_set_par)(fbi);
1757
1758         /* restore the data */
1759
1760         dev_dbg(info->dev, "restoring screen from %p\n", par->store_fb);
1761         dev_dbg(info->dev, "restoring cursor from %p\n", par->store_cursor);
1762
1763         if (par->store_fb)
1764                 memcpy_toio(par->screen.k_addr, par->store_fb,
1765                             par->screen.size);
1766
1767         if (par->store_cursor)
1768                 memcpy_toio(par->cursor.k_addr, par->store_cursor,
1769                             par->cursor.size);
1770
1771         acquire_console_sem();
1772         fb_set_suspend(fbi, 0);
1773         release_console_sem();
1774
1775         vfree(par->store_fb);
1776         vfree(par->store_cursor);
1777 }
1778
1779
1780 /* suspend and resume support */
1781
1782 static int sm501fb_suspend(struct platform_device *pdev, pm_message_t state)
1783 {
1784         struct sm501fb_info *info = platform_get_drvdata(pdev);
1785
1786         /* store crt control to resume with */
1787         info->pm_crt_ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1788
1789         sm501fb_suspend_fb(info, HEAD_CRT);
1790         sm501fb_suspend_fb(info, HEAD_PANEL);
1791
1792         /* turn off the clocks, in case the device is not powered down */
1793         sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 0);
1794
1795         return 0;
1796 }
1797
1798 #define SM501_CRT_CTRL_SAVE (SM501_DC_CRT_CONTROL_TVP |        \
1799                              SM501_DC_CRT_CONTROL_SEL)
1800
1801
1802 static int sm501fb_resume(struct platform_device *pdev)
1803 {
1804         struct sm501fb_info *info = platform_get_drvdata(pdev);
1805         unsigned long crt_ctrl;
1806
1807         sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 1);
1808
1809         /* restore the items we want to be saved for crt control */
1810
1811         crt_ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1812         crt_ctrl &= ~SM501_CRT_CTRL_SAVE;
1813         crt_ctrl |= info->pm_crt_ctrl & SM501_CRT_CTRL_SAVE;
1814         writel(crt_ctrl, info->regs + SM501_DC_CRT_CONTROL);
1815
1816         sm501fb_resume_fb(info, HEAD_CRT);
1817         sm501fb_resume_fb(info, HEAD_PANEL);
1818
1819         return 0;
1820 }
1821
1822 #else
1823 #define sm501fb_suspend NULL
1824 #define sm501fb_resume  NULL
1825 #endif
1826
1827 static struct platform_driver sm501fb_driver = {
1828         .probe          = sm501fb_probe,
1829         .remove         = sm501fb_remove,
1830         .suspend        = sm501fb_suspend,
1831         .resume         = sm501fb_resume,
1832         .driver         = {
1833                 .name   = "sm501-fb",
1834                 .owner  = THIS_MODULE,
1835         },
1836 };
1837
1838 static int __devinit sm501fb_init(void)
1839 {
1840         return platform_driver_register(&sm501fb_driver);
1841 }
1842
1843 static void __exit sm501fb_cleanup(void)
1844 {
1845         platform_driver_unregister(&sm501fb_driver);
1846 }
1847
1848 module_init(sm501fb_init);
1849 module_exit(sm501fb_cleanup);
1850
1851 MODULE_AUTHOR("Ben Dooks, Vincent Sanders");
1852 MODULE_DESCRIPTION("SM501 Framebuffer driver");
1853 MODULE_LICENSE("GPL v2");