2 * Support for periodic interrupts (100 per second) and for getting
3 * the current time from the RTC on Power Macintoshes.
5 * We use the decrementer register for our periodic interrupts.
7 * Paul Mackerras August 1996.
8 * Copyright (C) 1996 Paul Mackerras.
9 * Copyright (C) 2003-2005 Benjamin Herrenschmidt.
12 #include <linux/errno.h>
13 #include <linux/sched.h>
14 #include <linux/kernel.h>
15 #include <linux/param.h>
16 #include <linux/string.h>
18 #include <linux/init.h>
19 #include <linux/time.h>
20 #include <linux/adb.h>
21 #include <linux/cuda.h>
22 #include <linux/pmu.h>
23 #include <linux/interrupt.h>
24 #include <linux/hardirq.h>
25 #include <linux/rtc.h>
27 #include <asm/sections.h>
29 #include <asm/system.h>
31 #include <asm/pgtable.h>
32 #include <asm/machdep.h>
34 #include <asm/nvram.h>
40 #define DBG(x...) printk(x)
45 /* Apparently the RTC stores seconds since 1 Jan 1904 */
46 #define RTC_OFFSET 2082844800
49 * Calibrate the decrementer frequency with the VIA timer 1.
51 #define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */
54 #define RS 0x200 /* skip between registers */
55 #define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */
56 #define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */
57 #define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */
58 #define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */
59 #define ACR (11*RS) /* Auxiliary control register */
60 #define IFR (13*RS) /* Interrupt flag register */
63 #define T1MODE 0xc0 /* Timer 1 mode */
64 #define T1MODE_CONT 0x40 /* continuous interrupts */
66 /* Bits in IFR and IER */
67 #define T1_INT 0x40 /* Timer 1 interrupt */
69 long __init pmac_time_init(void)
75 delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16;
76 delta |= ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xa)) << 8;
77 delta |= pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xb);
78 if (delta & 0x00800000UL)
79 delta |= 0xFF000000UL;
80 dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0);
81 printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60,
87 #if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU)
88 static void to_rtc_time(unsigned long now, struct rtc_time *tm)
96 static unsigned long from_rtc_time(struct rtc_time *tm)
98 return mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday,
99 tm->tm_hour, tm->tm_min, tm->tm_sec);
102 #ifdef CONFIG_ADB_CUDA
103 static unsigned long cuda_get_time(void)
105 struct adb_request req;
108 if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0)
110 while (!req.complete)
112 if (req.reply_len != 7)
113 printk(KERN_ERR "cuda_get_time: got %d byte reply\n",
115 now = (req.reply[3] << 24) + (req.reply[4] << 16)
116 + (req.reply[5] << 8) + req.reply[6];
117 return ((unsigned long)now) - RTC_OFFSET;
120 #define cuda_get_rtc_time(tm) to_rtc_time(cuda_get_time(), (tm))
122 static int cuda_set_rtc_time(struct rtc_time *tm)
124 unsigned int nowtime;
125 struct adb_request req;
127 nowtime = from_rtc_time(tm) + RTC_OFFSET;
128 if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
129 nowtime >> 24, nowtime >> 16, nowtime >> 8,
132 while (!req.complete)
134 if ((req.reply_len != 3) && (req.reply_len != 7))
135 printk(KERN_ERR "cuda_set_rtc_time: got %d byte reply\n",
141 #define cuda_get_time() 0
142 #define cuda_get_rtc_time(tm)
143 #define cuda_set_rtc_time(tm) 0
146 #ifdef CONFIG_ADB_PMU
147 static unsigned long pmu_get_time(void)
149 struct adb_request req;
152 if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
154 pmu_wait_complete(&req);
155 if (req.reply_len != 4)
156 printk(KERN_ERR "pmu_get_time: got %d byte reply from PMU\n",
158 now = (req.reply[0] << 24) + (req.reply[1] << 16)
159 + (req.reply[2] << 8) + req.reply[3];
160 return ((unsigned long)now) - RTC_OFFSET;
163 #define pmu_get_rtc_time(tm) to_rtc_time(pmu_get_time(), (tm))
165 static int pmu_set_rtc_time(struct rtc_time *tm)
167 unsigned int nowtime;
168 struct adb_request req;
170 nowtime = from_rtc_time(tm) + RTC_OFFSET;
171 if (pmu_request(&req, NULL, 5, PMU_SET_RTC, nowtime >> 24,
172 nowtime >> 16, nowtime >> 8, nowtime) < 0)
174 pmu_wait_complete(&req);
175 if (req.reply_len != 0)
176 printk(KERN_ERR "pmu_set_rtc_time: %d byte reply from PMU\n",
182 #define pmu_get_time() 0
183 #define pmu_get_rtc_time(tm)
184 #define pmu_set_rtc_time(tm) 0
187 #ifdef CONFIG_PMAC_SMU
188 static unsigned long smu_get_time(void)
192 if (smu_get_rtc_time(&tm, 1))
194 return from_rtc_time(&tm);
198 #define smu_get_time() 0
199 #define smu_get_rtc_time(tm, spin)
200 #define smu_set_rtc_time(tm, spin) 0
203 /* Can't be __init, it's called when suspending and resuming */
204 unsigned long pmac_get_boot_time(void)
206 /* Get the time from the RTC, used only at boot time */
207 switch (sys_ctrler) {
208 case SYS_CTRLER_CUDA:
209 return cuda_get_time();
211 return pmu_get_time();
213 return smu_get_time();
219 void pmac_get_rtc_time(struct rtc_time *tm)
221 /* Get the time from the RTC, used only at boot time */
222 switch (sys_ctrler) {
223 case SYS_CTRLER_CUDA:
224 cuda_get_rtc_time(tm);
227 pmu_get_rtc_time(tm);
230 smu_get_rtc_time(tm, 1);
237 int pmac_set_rtc_time(struct rtc_time *tm)
239 switch (sys_ctrler) {
240 case SYS_CTRLER_CUDA:
241 return cuda_set_rtc_time(tm);
243 return pmu_set_rtc_time(tm);
245 return smu_set_rtc_time(tm, 1);
253 * Calibrate the decrementer register using VIA timer 1.
254 * This is used both on powermacs and CHRP machines.
256 int __init via_calibrate_decr(void)
258 struct device_node *vias;
259 volatile unsigned char __iomem *via;
260 int count = VIA_TIMER_FREQ_6 / 100;
261 unsigned int dstart, dend;
262 struct resource rsrc;
264 vias = of_find_node_by_name(NULL, "via-cuda");
266 vias = of_find_node_by_name(NULL, "via-pmu");
268 vias = of_find_node_by_name(NULL, "via");
269 if (vias == 0 || of_address_to_resource(vias, 0, &rsrc))
271 via = ioremap(rsrc.start, rsrc.end - rsrc.start + 1);
273 printk(KERN_ERR "Failed to map VIA for timer calibration !\n");
277 /* set timer 1 for continuous interrupts */
278 out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT);
279 /* set the counter to a small value */
280 out_8(&via[T1CH], 2);
281 /* set the latch to `count' */
282 out_8(&via[T1LL], count);
283 out_8(&via[T1LH], count >> 8);
284 /* wait until it hits 0 */
285 while ((in_8(&via[IFR]) & T1_INT) == 0)
288 /* clear the interrupt & wait until it hits 0 again */
290 while ((in_8(&via[IFR]) & T1_INT) == 0)
294 ppc_tb_freq = (dstart - dend) * 100 / 6;
303 * Query the OF and get the decr frequency.
305 void __init pmac_calibrate_decr(void)
307 generic_calibrate_decr();
310 /* We assume MacRISC2 machines have correct device-tree
311 * calibration. That's better since the VIA itself seems
312 * to be slightly off. --BenH
314 if (!machine_is_compatible("MacRISC2") &&
315 !machine_is_compatible("MacRISC3") &&
316 !machine_is_compatible("MacRISC4"))
317 if (via_calibrate_decr())
320 /* Special case: QuickSilver G4s seem to have a badly calibrated
321 * timebase-frequency in OF, VIA is much better on these. We should
322 * probably implement calibration based on the KL timer on these
323 * machines anyway... -BenH
325 if (machine_is_compatible("PowerMac3,5"))
326 if (via_calibrate_decr())