Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial
[linux-2.6] / drivers / acpi / parser / psloop.c
1 /******************************************************************************
2  *
3  * Module Name: psloop - Main AML parse loop
4  *
5  *****************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2006, R. Byron Moore
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 /*
45  * Parse the AML and build an operation tree as most interpreters,
46  * like Perl, do.  Parsing is done by hand rather than with a YACC
47  * generated parser to tightly constrain stack and dynamic memory
48  * usage.  At the same time, parsing is kept flexible and the code
49  * fairly compact by parsing based on a list of AML opcode
50  * templates in aml_op_info[]
51  */
52
53 #include <acpi/acpi.h>
54 #include <acpi/acparser.h>
55 #include <acpi/acdispat.h>
56 #include <acpi/amlcode.h>
57
58 #define _COMPONENT          ACPI_PARSER
59 ACPI_MODULE_NAME("psloop")
60
61 static u32 acpi_gbl_depth = 0;
62
63 /*******************************************************************************
64  *
65  * FUNCTION:    acpi_ps_parse_loop
66  *
67  * PARAMETERS:  walk_state          - Current state
68  *
69  * RETURN:      Status
70  *
71  * DESCRIPTION: Parse AML (pointed to by the current parser state) and return
72  *              a tree of ops.
73  *
74  ******************************************************************************/
75
76 acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state)
77 {
78         acpi_status status = AE_OK;
79         acpi_status status2;
80         union acpi_parse_object *op = NULL;     /* current op */
81         union acpi_parse_object *arg = NULL;
82         union acpi_parse_object *pre_op = NULL;
83         struct acpi_parse_state *parser_state;
84         u8 *aml_op_start = NULL;
85
86         ACPI_FUNCTION_TRACE_PTR(ps_parse_loop, walk_state);
87
88         if (walk_state->descending_callback == NULL) {
89                 return_ACPI_STATUS(AE_BAD_PARAMETER);
90         }
91
92         parser_state = &walk_state->parser_state;
93         walk_state->arg_types = 0;
94
95 #if (!defined (ACPI_NO_METHOD_EXECUTION) && !defined (ACPI_CONSTANT_EVAL_ONLY))
96
97         if (walk_state->walk_type & ACPI_WALK_METHOD_RESTART) {
98
99                 /* We are restarting a preempted control method */
100
101                 if (acpi_ps_has_completed_scope(parser_state)) {
102                         /*
103                          * We must check if a predicate to an IF or WHILE statement
104                          * was just completed
105                          */
106                         if ((parser_state->scope->parse_scope.op) &&
107                             ((parser_state->scope->parse_scope.op->common.
108                               aml_opcode == AML_IF_OP)
109                              || (parser_state->scope->parse_scope.op->common.
110                                  aml_opcode == AML_WHILE_OP))
111                             && (walk_state->control_state)
112                             && (walk_state->control_state->common.state ==
113                                 ACPI_CONTROL_PREDICATE_EXECUTING)) {
114                                 /*
115                                  * A predicate was just completed, get the value of the
116                                  * predicate and branch based on that value
117                                  */
118                                 walk_state->op = NULL;
119                                 status =
120                                     acpi_ds_get_predicate_value(walk_state,
121                                                                 ACPI_TO_POINTER
122                                                                 (TRUE));
123                                 if (ACPI_FAILURE(status)
124                                     && ((status & AE_CODE_MASK) !=
125                                         AE_CODE_CONTROL)) {
126                                         if (status == AE_AML_NO_RETURN_VALUE) {
127                                                 ACPI_EXCEPTION((AE_INFO, status,
128                                                                 "Invoked method did not return a value"));
129
130                                         }
131                                         ACPI_EXCEPTION((AE_INFO, status,
132                                                         "GetPredicate Failed"));
133                                         return_ACPI_STATUS(status);
134                                 }
135
136                                 status =
137                                     acpi_ps_next_parse_state(walk_state, op,
138                                                              status);
139                         }
140
141                         acpi_ps_pop_scope(parser_state, &op,
142                                           &walk_state->arg_types,
143                                           &walk_state->arg_count);
144                         ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
145                                           "Popped scope, Op=%p\n", op));
146                 } else if (walk_state->prev_op) {
147
148                         /* We were in the middle of an op */
149
150                         op = walk_state->prev_op;
151                         walk_state->arg_types = walk_state->prev_arg_types;
152                 }
153         }
154 #endif
155
156         /* Iterative parsing loop, while there is more AML to process: */
157
158         while ((parser_state->aml < parser_state->aml_end) || (op)) {
159                 aml_op_start = parser_state->aml;
160                 if (!op) {
161
162                         /* Get the next opcode from the AML stream */
163
164                         walk_state->aml_offset =
165                             (u32) ACPI_PTR_DIFF(parser_state->aml,
166                                                 parser_state->aml_start);
167                         walk_state->opcode = acpi_ps_peek_opcode(parser_state);
168
169                         /*
170                          * First cut to determine what we have found:
171                          * 1) A valid AML opcode
172                          * 2) A name string
173                          * 3) An unknown/invalid opcode
174                          */
175                         walk_state->op_info =
176                             acpi_ps_get_opcode_info(walk_state->opcode);
177                         switch (walk_state->op_info->class) {
178                         case AML_CLASS_ASCII:
179                         case AML_CLASS_PREFIX:
180                                 /*
181                                  * Starts with a valid prefix or ASCII char, this is a name
182                                  * string.  Convert the bare name string to a namepath.
183                                  */
184                                 walk_state->opcode = AML_INT_NAMEPATH_OP;
185                                 walk_state->arg_types = ARGP_NAMESTRING;
186                                 break;
187
188                         case AML_CLASS_UNKNOWN:
189
190                                 /* The opcode is unrecognized.  Just skip unknown opcodes */
191
192                                 ACPI_ERROR((AE_INFO,
193                                             "Found unknown opcode %X at AML address %p offset %X, ignoring",
194                                             walk_state->opcode,
195                                             parser_state->aml,
196                                             walk_state->aml_offset));
197
198                                 ACPI_DUMP_BUFFER(parser_state->aml, 128);
199
200                                 /* Assume one-byte bad opcode */
201
202                                 parser_state->aml++;
203                                 continue;
204
205                         default:
206
207                                 /* Found opcode info, this is a normal opcode */
208
209                                 parser_state->aml +=
210                                     acpi_ps_get_opcode_size(walk_state->opcode);
211                                 walk_state->arg_types =
212                                     walk_state->op_info->parse_args;
213                                 break;
214                         }
215
216                         /* Create Op structure and append to parent's argument list */
217
218                         if (walk_state->op_info->flags & AML_NAMED) {
219
220                                 /* Allocate a new pre_op if necessary */
221
222                                 if (!pre_op) {
223                                         pre_op =
224                                             acpi_ps_alloc_op(walk_state->
225                                                              opcode);
226                                         if (!pre_op) {
227                                                 status = AE_NO_MEMORY;
228                                                 goto close_this_op;
229                                         }
230                                 }
231
232                                 pre_op->common.value.arg = NULL;
233                                 pre_op->common.aml_opcode = walk_state->opcode;
234
235                                 /*
236                                  * Get and append arguments until we find the node that contains
237                                  * the name (the type ARGP_NAME).
238                                  */
239                                 while (GET_CURRENT_ARG_TYPE
240                                        (walk_state->arg_types)
241                                        &&
242                                        (GET_CURRENT_ARG_TYPE
243                                         (walk_state->arg_types) != ARGP_NAME)) {
244                                         status =
245                                             acpi_ps_get_next_arg(walk_state,
246                                                                  parser_state,
247                                                                  GET_CURRENT_ARG_TYPE
248                                                                  (walk_state->
249                                                                   arg_types),
250                                                                  &arg);
251                                         if (ACPI_FAILURE(status)) {
252                                                 goto close_this_op;
253                                         }
254
255                                         acpi_ps_append_arg(pre_op, arg);
256                                         INCREMENT_ARG_LIST(walk_state->
257                                                            arg_types);
258                                 }
259
260                                 /*
261                                  * Make sure that we found a NAME and didn't run out of
262                                  * arguments
263                                  */
264                                 if (!GET_CURRENT_ARG_TYPE
265                                     (walk_state->arg_types)) {
266                                         status = AE_AML_NO_OPERAND;
267                                         goto close_this_op;
268                                 }
269
270                                 /* We know that this arg is a name, move to next arg */
271
272                                 INCREMENT_ARG_LIST(walk_state->arg_types);
273
274                                 /*
275                                  * Find the object.  This will either insert the object into
276                                  * the namespace or simply look it up
277                                  */
278                                 walk_state->op = NULL;
279
280                                 status =
281                                     walk_state->descending_callback(walk_state,
282                                                                     &op);
283                                 if (ACPI_FAILURE(status)) {
284                                         ACPI_EXCEPTION((AE_INFO, status,
285                                                         "During name lookup/catalog"));
286                                         goto close_this_op;
287                                 }
288
289                                 if (!op) {
290                                         continue;
291                                 }
292
293                                 status =
294                                     acpi_ps_next_parse_state(walk_state, op,
295                                                              status);
296                                 if (status == AE_CTRL_PENDING) {
297                                         status = AE_OK;
298                                         goto close_this_op;
299                                 }
300
301                                 if (ACPI_FAILURE(status)) {
302                                         goto close_this_op;
303                                 }
304
305                                 acpi_ps_append_arg(op,
306                                                    pre_op->common.value.arg);
307                                 acpi_gbl_depth++;
308
309                                 if (op->common.aml_opcode == AML_REGION_OP) {
310                                         /*
311                                          * Defer final parsing of an operation_region body,
312                                          * because we don't have enough info in the first pass
313                                          * to parse it correctly (i.e., there may be method
314                                          * calls within the term_arg elements of the body.)
315                                          *
316                                          * However, we must continue parsing because
317                                          * the opregion is not a standalone package --
318                                          * we don't know where the end is at this point.
319                                          *
320                                          * (Length is unknown until parse of the body complete)
321                                          */
322                                         op->named.data = aml_op_start;
323                                         op->named.length = 0;
324                                 }
325                         } else {
326                                 /* Not a named opcode, just allocate Op and append to parent */
327
328                                 walk_state->op_info =
329                                     acpi_ps_get_opcode_info(walk_state->opcode);
330                                 op = acpi_ps_alloc_op(walk_state->opcode);
331                                 if (!op) {
332                                         status = AE_NO_MEMORY;
333                                         goto close_this_op;
334                                 }
335
336                                 if (walk_state->op_info->flags & AML_CREATE) {
337                                         /*
338                                          * Backup to beginning of create_xXXfield declaration
339                                          * body_length is unknown until we parse the body
340                                          */
341                                         op->named.data = aml_op_start;
342                                         op->named.length = 0;
343                                 }
344
345                                 acpi_ps_append_arg(acpi_ps_get_parent_scope
346                                                    (parser_state), op);
347
348                                 if ((walk_state->descending_callback != NULL)) {
349                                         /*
350                                          * Find the object. This will either insert the object into
351                                          * the namespace or simply look it up
352                                          */
353                                         walk_state->op = op;
354
355                                         status =
356                                             walk_state->
357                                             descending_callback(walk_state,
358                                                                 &op);
359                                         status =
360                                             acpi_ps_next_parse_state(walk_state,
361                                                                      op,
362                                                                      status);
363                                         if (status == AE_CTRL_PENDING) {
364                                                 status = AE_OK;
365                                                 goto close_this_op;
366                                         }
367
368                                         if (ACPI_FAILURE(status)) {
369                                                 goto close_this_op;
370                                         }
371                                 }
372                         }
373
374                         op->common.aml_offset = walk_state->aml_offset;
375
376                         if (walk_state->op_info) {
377                                 ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
378                                                   "Opcode %4.4X [%s] Op %p Aml %p AmlOffset %5.5X\n",
379                                                   (u32) op->common.aml_opcode,
380                                                   walk_state->op_info->name, op,
381                                                   parser_state->aml,
382                                                   op->common.aml_offset));
383                         }
384                 }
385
386                 /*
387                  * Start arg_count at zero because we don't know if there are
388                  * any args yet
389                  */
390                 walk_state->arg_count = 0;
391
392                 /* Are there any arguments that must be processed? */
393
394                 if (walk_state->arg_types) {
395
396                         /* Get arguments */
397
398                         switch (op->common.aml_opcode) {
399                         case AML_BYTE_OP:       /* AML_BYTEDATA_ARG */
400                         case AML_WORD_OP:       /* AML_WORDDATA_ARG */
401                         case AML_DWORD_OP:      /* AML_DWORDATA_ARG */
402                         case AML_QWORD_OP:      /* AML_QWORDATA_ARG */
403                         case AML_STRING_OP:     /* AML_ASCIICHARLIST_ARG */
404
405                                 /* Fill in constant or string argument directly */
406
407                                 acpi_ps_get_next_simple_arg(parser_state,
408                                                             GET_CURRENT_ARG_TYPE
409                                                             (walk_state->
410                                                              arg_types), op);
411                                 break;
412
413                         case AML_INT_NAMEPATH_OP:       /* AML_NAMESTRING_ARG */
414
415                                 status =
416                                     acpi_ps_get_next_namepath(walk_state,
417                                                               parser_state, op,
418                                                               1);
419                                 if (ACPI_FAILURE(status)) {
420                                         goto close_this_op;
421                                 }
422
423                                 walk_state->arg_types = 0;
424                                 break;
425
426                         default:
427                                 /*
428                                  * Op is not a constant or string, append each argument
429                                  * to the Op
430                                  */
431                                 while (GET_CURRENT_ARG_TYPE
432                                        (walk_state->arg_types)
433                                        && !walk_state->arg_count) {
434                                         walk_state->aml_offset = (u32)
435                                             ACPI_PTR_DIFF(parser_state->aml,
436                                                           parser_state->
437                                                           aml_start);
438
439                                         status =
440                                             acpi_ps_get_next_arg(walk_state,
441                                                                  parser_state,
442                                                                  GET_CURRENT_ARG_TYPE
443                                                                  (walk_state->
444                                                                   arg_types),
445                                                                  &arg);
446                                         if (ACPI_FAILURE(status)) {
447                                                 goto close_this_op;
448                                         }
449
450                                         if (arg) {
451                                                 arg->common.aml_offset =
452                                                     walk_state->aml_offset;
453                                                 acpi_ps_append_arg(op, arg);
454                                         }
455                                         INCREMENT_ARG_LIST(walk_state->
456                                                            arg_types);
457                                 }
458
459                                 /* Special processing for certain opcodes */
460
461                                 /* TBD (remove): Temporary mechanism to disable this code if needed */
462
463 #ifdef ACPI_ENABLE_MODULE_LEVEL_CODE
464
465                                 if ((walk_state->pass_number <=
466                                      ACPI_IMODE_LOAD_PASS1)
467                                     &&
468                                     ((walk_state->
469                                       parse_flags & ACPI_PARSE_DISASSEMBLE) ==
470                                      0)) {
471                                         /*
472                                          * We want to skip If/Else/While constructs during Pass1
473                                          * because we want to actually conditionally execute the
474                                          * code during Pass2.
475                                          *
476                                          * Except for disassembly, where we always want to
477                                          * walk the If/Else/While packages
478                                          */
479                                         switch (op->common.aml_opcode) {
480                                         case AML_IF_OP:
481                                         case AML_ELSE_OP:
482                                         case AML_WHILE_OP:
483
484                                                 ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
485                                                                   "Pass1: Skipping an If/Else/While body\n"));
486
487                                                 /* Skip body of if/else/while in pass 1 */
488
489                                                 parser_state->aml =
490                                                     parser_state->pkg_end;
491                                                 walk_state->arg_count = 0;
492                                                 break;
493
494                                         default:
495                                                 break;
496                                         }
497                                 }
498 #endif
499                                 switch (op->common.aml_opcode) {
500                                 case AML_METHOD_OP:
501
502                                         /*
503                                          * Skip parsing of control method
504                                          * because we don't have enough info in the first pass
505                                          * to parse it correctly.
506                                          *
507                                          * Save the length and address of the body
508                                          */
509                                         op->named.data = parser_state->aml;
510                                         op->named.length =
511                                             (u32) (parser_state->pkg_end -
512                                                    parser_state->aml);
513
514                                         /* Skip body of method */
515
516                                         parser_state->aml =
517                                             parser_state->pkg_end;
518                                         walk_state->arg_count = 0;
519                                         break;
520
521                                 case AML_BUFFER_OP:
522                                 case AML_PACKAGE_OP:
523                                 case AML_VAR_PACKAGE_OP:
524
525                                         if ((op->common.parent) &&
526                                             (op->common.parent->common.
527                                              aml_opcode == AML_NAME_OP)
528                                             && (walk_state->pass_number <=
529                                                 ACPI_IMODE_LOAD_PASS2)) {
530                                                 /*
531                                                  * Skip parsing of Buffers and Packages
532                                                  * because we don't have enough info in the first pass
533                                                  * to parse them correctly.
534                                                  */
535                                                 op->named.data = aml_op_start;
536                                                 op->named.length =
537                                                     (u32) (parser_state->
538                                                            pkg_end -
539                                                            aml_op_start);
540
541                                                 /* Skip body */
542
543                                                 parser_state->aml =
544                                                     parser_state->pkg_end;
545                                                 walk_state->arg_count = 0;
546                                         }
547                                         break;
548
549                                 case AML_WHILE_OP:
550
551                                         if (walk_state->control_state) {
552                                                 walk_state->control_state->
553                                                     control.package_end =
554                                                     parser_state->pkg_end;
555                                         }
556                                         break;
557
558                                 default:
559
560                                         /* No action for all other opcodes */
561                                         break;
562                                 }
563                                 break;
564                         }
565                 }
566
567                 /* Check for arguments that need to be processed */
568
569                 if (walk_state->arg_count) {
570                         /*
571                          * There are arguments (complex ones), push Op and
572                          * prepare for argument
573                          */
574                         status = acpi_ps_push_scope(parser_state, op,
575                                                     walk_state->arg_types,
576                                                     walk_state->arg_count);
577                         if (ACPI_FAILURE(status)) {
578                                 goto close_this_op;
579                         }
580                         op = NULL;
581                         continue;
582                 }
583
584                 /*
585                  * All arguments have been processed -- Op is complete,
586                  * prepare for next
587                  */
588                 walk_state->op_info =
589                     acpi_ps_get_opcode_info(op->common.aml_opcode);
590                 if (walk_state->op_info->flags & AML_NAMED) {
591                         if (acpi_gbl_depth) {
592                                 acpi_gbl_depth--;
593                         }
594
595                         if (op->common.aml_opcode == AML_REGION_OP) {
596                                 /*
597                                  * Skip parsing of control method or opregion body,
598                                  * because we don't have enough info in the first pass
599                                  * to parse them correctly.
600                                  *
601                                  * Completed parsing an op_region declaration, we now
602                                  * know the length.
603                                  */
604                                 op->named.length =
605                                     (u32) (parser_state->aml - op->named.data);
606                         }
607                 }
608
609                 if (walk_state->op_info->flags & AML_CREATE) {
610                         /*
611                          * Backup to beginning of create_xXXfield declaration (1 for
612                          * Opcode)
613                          *
614                          * body_length is unknown until we parse the body
615                          */
616                         op->named.length =
617                             (u32) (parser_state->aml - op->named.data);
618                 }
619
620                 /* This op complete, notify the dispatcher */
621
622                 if (walk_state->ascending_callback != NULL) {
623                         walk_state->op = op;
624                         walk_state->opcode = op->common.aml_opcode;
625
626                         status = walk_state->ascending_callback(walk_state);
627                         status =
628                             acpi_ps_next_parse_state(walk_state, op, status);
629                         if (status == AE_CTRL_PENDING) {
630                                 status = AE_OK;
631                                 goto close_this_op;
632                         }
633                 }
634
635               close_this_op:
636                 /*
637                  * Finished one argument of the containing scope
638                  */
639                 parser_state->scope->parse_scope.arg_count--;
640
641                 /* Finished with pre_op */
642
643                 if (pre_op) {
644                         acpi_ps_free_op(pre_op);
645                         pre_op = NULL;
646                 }
647
648                 /* Close this Op (will result in parse subtree deletion) */
649
650                 status2 = acpi_ps_complete_this_op(walk_state, op);
651                 if (ACPI_FAILURE(status2)) {
652                         return_ACPI_STATUS(status2);
653                 }
654                 op = NULL;
655
656                 switch (status) {
657                 case AE_OK:
658                         break;
659
660                 case AE_CTRL_TRANSFER:
661
662                         /* We are about to transfer to a called method. */
663
664                         walk_state->prev_op = op;
665                         walk_state->prev_arg_types = walk_state->arg_types;
666                         return_ACPI_STATUS(status);
667
668                 case AE_CTRL_END:
669
670                         acpi_ps_pop_scope(parser_state, &op,
671                                           &walk_state->arg_types,
672                                           &walk_state->arg_count);
673
674                         if (op) {
675                                 walk_state->op = op;
676                                 walk_state->op_info =
677                                     acpi_ps_get_opcode_info(op->common.
678                                                             aml_opcode);
679                                 walk_state->opcode = op->common.aml_opcode;
680
681                                 status =
682                                     walk_state->ascending_callback(walk_state);
683                                 status =
684                                     acpi_ps_next_parse_state(walk_state, op,
685                                                              status);
686
687                                 status2 =
688                                     acpi_ps_complete_this_op(walk_state, op);
689                                 if (ACPI_FAILURE(status2)) {
690                                         return_ACPI_STATUS(status2);
691                                 }
692                                 op = NULL;
693                         }
694                         status = AE_OK;
695                         break;
696
697                 case AE_CTRL_BREAK:
698                 case AE_CTRL_CONTINUE:
699
700                         /* Pop off scopes until we find the While */
701
702                         while (!op || (op->common.aml_opcode != AML_WHILE_OP)) {
703                                 acpi_ps_pop_scope(parser_state, &op,
704                                                   &walk_state->arg_types,
705                                                   &walk_state->arg_count);
706
707                                 if (op->common.aml_opcode != AML_WHILE_OP) {
708                                         status2 =
709                                             acpi_ds_result_stack_pop
710                                             (walk_state);
711                                         if (ACPI_FAILURE(status2)) {
712                                                 return_ACPI_STATUS(status2);
713                                         }
714                                 }
715                         }
716
717                         /* Close this iteration of the While loop */
718
719                         walk_state->op = op;
720                         walk_state->op_info =
721                             acpi_ps_get_opcode_info(op->common.aml_opcode);
722                         walk_state->opcode = op->common.aml_opcode;
723
724                         status = walk_state->ascending_callback(walk_state);
725                         status =
726                             acpi_ps_next_parse_state(walk_state, op, status);
727
728                         status2 = acpi_ps_complete_this_op(walk_state, op);
729                         if (ACPI_FAILURE(status2)) {
730                                 return_ACPI_STATUS(status2);
731                         }
732                         op = NULL;
733
734                         status = AE_OK;
735                         break;
736
737                 case AE_CTRL_TERMINATE:
738
739                         status = AE_OK;
740
741                         /* Clean up */
742                         do {
743                                 if (op) {
744                                         status2 =
745                                             acpi_ps_complete_this_op(walk_state,
746                                                                      op);
747                                         if (ACPI_FAILURE(status2)) {
748                                                 return_ACPI_STATUS(status2);
749                                         }
750
751                                         status2 =
752                                             acpi_ds_result_stack_pop
753                                             (walk_state);
754                                         if (ACPI_FAILURE(status2)) {
755                                                 return_ACPI_STATUS(status2);
756                                         }
757
758                                         acpi_ut_delete_generic_state
759                                             (acpi_ut_pop_generic_state
760                                              (&walk_state->control_state));
761                                 }
762
763                                 acpi_ps_pop_scope(parser_state, &op,
764                                                   &walk_state->arg_types,
765                                                   &walk_state->arg_count);
766
767                         } while (op);
768
769                         return_ACPI_STATUS(status);
770
771                 default:        /* All other non-AE_OK status */
772
773                         do {
774                                 if (op) {
775                                         status2 =
776                                             acpi_ps_complete_this_op(walk_state,
777                                                                      op);
778                                         if (ACPI_FAILURE(status2)) {
779                                                 return_ACPI_STATUS(status2);
780                                         }
781                                 }
782
783                                 acpi_ps_pop_scope(parser_state, &op,
784                                                   &walk_state->arg_types,
785                                                   &walk_state->arg_count);
786
787                         } while (op);
788
789                         /*
790                          * TBD: Cleanup parse ops on error
791                          */
792 #if 0
793                         if (op == NULL) {
794                                 acpi_ps_pop_scope(parser_state, &op,
795                                                   &walk_state->arg_types,
796                                                   &walk_state->arg_count);
797                         }
798 #endif
799                         walk_state->prev_op = op;
800                         walk_state->prev_arg_types = walk_state->arg_types;
801                         return_ACPI_STATUS(status);
802                 }
803
804                 /* This scope complete? */
805
806                 if (acpi_ps_has_completed_scope(parser_state)) {
807                         acpi_ps_pop_scope(parser_state, &op,
808                                           &walk_state->arg_types,
809                                           &walk_state->arg_count);
810                         ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
811                                           "Popped scope, Op=%p\n", op));
812                 } else {
813                         op = NULL;
814                 }
815
816         }                       /* while parser_state->Aml */
817
818         /*
819          * Complete the last Op (if not completed), and clear the scope stack.
820          * It is easily possible to end an AML "package" with an unbounded number
821          * of open scopes (such as when several ASL blocks are closed with
822          * sequential closing braces).  We want to terminate each one cleanly.
823          */
824         ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "AML package complete at Op %p\n",
825                           op));
826         do {
827                 if (op) {
828                         if (walk_state->ascending_callback != NULL) {
829                                 walk_state->op = op;
830                                 walk_state->op_info =
831                                     acpi_ps_get_opcode_info(op->common.
832                                                             aml_opcode);
833                                 walk_state->opcode = op->common.aml_opcode;
834
835                                 status =
836                                     walk_state->ascending_callback(walk_state);
837                                 status =
838                                     acpi_ps_next_parse_state(walk_state, op,
839                                                              status);
840                                 if (status == AE_CTRL_PENDING) {
841                                         status = AE_OK;
842                                         goto close_this_op;
843                                 }
844
845                                 if (status == AE_CTRL_TERMINATE) {
846                                         status = AE_OK;
847
848                                         /* Clean up */
849                                         do {
850                                                 if (op) {
851                                                         status2 =
852                                                             acpi_ps_complete_this_op
853                                                             (walk_state, op);
854                                                         if (ACPI_FAILURE
855                                                             (status2)) {
856                                                                 return_ACPI_STATUS
857                                                                     (status2);
858                                                         }
859                                                 }
860
861                                                 acpi_ps_pop_scope(parser_state,
862                                                                   &op,
863                                                                   &walk_state->
864                                                                   arg_types,
865                                                                   &walk_state->
866                                                                   arg_count);
867
868                                         } while (op);
869
870                                         return_ACPI_STATUS(status);
871                                 }
872
873                                 else if (ACPI_FAILURE(status)) {
874
875                                         /* First error is most important */
876
877                                         (void)
878                                             acpi_ps_complete_this_op(walk_state,
879                                                                      op);
880                                         return_ACPI_STATUS(status);
881                                 }
882                         }
883
884                         status2 = acpi_ps_complete_this_op(walk_state, op);
885                         if (ACPI_FAILURE(status2)) {
886                                 return_ACPI_STATUS(status2);
887                         }
888                 }
889
890                 acpi_ps_pop_scope(parser_state, &op, &walk_state->arg_types,
891                                   &walk_state->arg_count);
892
893         } while (op);
894
895         return_ACPI_STATUS(status);
896 }