2 * PCMCIA 16-bit resource management functions
4 * The initial developer of the original code is David A. Hinds
5 * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
6 * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
8 * Copyright (C) 1999 David A. Hinds
9 * Copyright (C) 2004-2005 Dominik Brodowski
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
17 #include <linux/module.h>
18 #include <linux/kernel.h>
19 #include <linux/interrupt.h>
20 #include <linux/delay.h>
21 #include <linux/pci.h>
22 #include <linux/device.h>
24 #include <pcmcia/cs_types.h>
25 #include <pcmcia/ss.h>
26 #include <pcmcia/cs.h>
27 #include <pcmcia/cistpl.h>
28 #include <pcmcia/cisreg.h>
29 #include <pcmcia/ds.h>
31 #include "cs_internal.h"
34 /* Access speed for IO windows */
35 static int io_speed = 0;
36 module_param(io_speed, int, 0444);
39 #ifdef CONFIG_PCMCIA_PROBE
41 /* mask of IRQs already reserved by other cards, we should avoid using them */
42 static u8 pcmcia_used_irq[NR_IRQS];
46 #ifdef CONFIG_PCMCIA_DEBUG
47 extern int ds_pc_debug;
49 #define ds_dbg(skt, lvl, fmt, arg...) do { \
50 if (ds_pc_debug >= lvl) \
51 dev_printk(KERN_DEBUG, &skt->dev, \
52 "pcmcia_resource: " fmt, \
56 #define ds_dbg(skt, lvl, fmt, arg...) do { } while (0)
63 * Special stuff for managing IO windows, because they are scarce
66 static int alloc_io_space(struct pcmcia_socket *s, u_int attr,
67 unsigned int *base, unsigned int num, u_int lines)
70 unsigned int try, align;
72 align = (*base) ? (lines ? 1<<lines : 0) : 1;
73 if (align && (align < num)) {
75 ds_dbg(s, 0, "odd IO request: num %#x align %#x\n",
79 while (align && (align < num)) align <<= 1;
81 if (*base & ~(align-1)) {
82 ds_dbg(s, 0, "odd IO request: base %#x align %#x\n",
86 if ((s->features & SS_CAP_STATIC_MAP) && s->io_offset) {
87 *base = s->io_offset | (*base & 0x0fff);
90 /* Check for an already-allocated window that must conflict with
91 * what was asked for. It is a hack because it does not catch all
92 * potential conflicts, just the most obvious ones.
94 for (i = 0; i < MAX_IO_WIN; i++)
95 if ((s->io[i].res) && *base &&
96 ((s->io[i].res->start & (align-1)) == *base))
98 for (i = 0; i < MAX_IO_WIN; i++) {
100 s->io[i].res = pcmcia_find_io_region(*base, num, align, s);
102 *base = s->io[i].res->start;
103 s->io[i].res->flags = (s->io[i].res->flags & ~IORESOURCE_BITS) | (attr & IORESOURCE_BITS);
104 s->io[i].InUse = num;
108 } else if ((s->io[i].res->flags & IORESOURCE_BITS) != (attr & IORESOURCE_BITS))
110 /* Try to extend top of window */
111 try = s->io[i].res->end + 1;
112 if ((*base == 0) || (*base == try))
113 if (pcmcia_adjust_io_region(s->io[i].res, s->io[i].res->start,
114 s->io[i].res->end + num, s) == 0) {
116 s->io[i].InUse += num;
119 /* Try to extend bottom of window */
120 try = s->io[i].res->start - num;
121 if ((*base == 0) || (*base == try))
122 if (pcmcia_adjust_io_region(s->io[i].res, s->io[i].res->start - num,
123 s->io[i].res->end, s) == 0) {
125 s->io[i].InUse += num;
129 return (i == MAX_IO_WIN);
130 } /* alloc_io_space */
133 static void release_io_space(struct pcmcia_socket *s, unsigned int base,
138 for (i = 0; i < MAX_IO_WIN; i++) {
141 if ((s->io[i].res->start <= base) &&
142 (s->io[i].res->end >= base+num-1)) {
143 s->io[i].InUse -= num;
144 /* Free the window if no one else is using it */
145 if (s->io[i].InUse == 0) {
146 release_resource(s->io[i].res);
152 } /* release_io_space */
155 /** pccard_access_configuration_register
157 * Access_configuration_register() reads and writes configuration
158 * registers in attribute memory. Memory window 0 is reserved for
159 * this and the tuple reading services.
162 int pcmcia_access_configuration_register(struct pcmcia_device *p_dev,
165 struct pcmcia_socket *s;
170 if (!p_dev || !p_dev->function_config)
174 c = p_dev->function_config;
176 if (!(c->state & CONFIG_LOCKED))
179 addr = (c->ConfigBase + reg->Offset) >> 1;
181 switch (reg->Action) {
183 pcmcia_read_cis_mem(s, 1, addr, 1, &val);
188 pcmcia_write_cis_mem(s, 1, addr, 1, &val);
195 } /* pcmcia_access_configuration_register */
196 EXPORT_SYMBOL(pcmcia_access_configuration_register);
199 /** pcmcia_get_window
201 int pcmcia_get_window(struct pcmcia_socket *s, window_handle_t *handle,
202 int idx, win_req_t *req)
207 if (!s || !(s->state & SOCKET_PRESENT))
209 for (w = idx; w < MAX_WIN; w++)
210 if (s->state & SOCKET_WIN_REQ(w))
215 req->Base = win->ctl.res->start;
216 req->Size = win->ctl.res->end - win->ctl.res->start + 1;
217 req->AccessSpeed = win->ctl.speed;
219 if (win->ctl.flags & MAP_ATTRIB)
220 req->Attributes |= WIN_MEMORY_TYPE_AM;
221 if (win->ctl.flags & MAP_ACTIVE)
222 req->Attributes |= WIN_ENABLE;
223 if (win->ctl.flags & MAP_16BIT)
224 req->Attributes |= WIN_DATA_WIDTH_16;
225 if (win->ctl.flags & MAP_USE_WAIT)
226 req->Attributes |= WIN_USE_WAIT;
229 } /* pcmcia_get_window */
230 EXPORT_SYMBOL(pcmcia_get_window);
233 /** pcmcia_get_mem_page
235 * Change the card address of an already open memory window.
237 int pcmcia_get_mem_page(window_handle_t win, memreq_t *req)
239 if ((win == NULL) || (win->magic != WINDOW_MAGIC))
242 req->CardOffset = win->ctl.card_start;
244 } /* pcmcia_get_mem_page */
245 EXPORT_SYMBOL(pcmcia_get_mem_page);
248 int pcmcia_map_mem_page(window_handle_t win, memreq_t *req)
250 struct pcmcia_socket *s;
251 if ((win == NULL) || (win->magic != WINDOW_MAGIC))
254 if (req->Page != 0) {
255 ds_dbg(s, 0, "failure: requested page is zero\n");
258 win->ctl.card_start = req->CardOffset;
259 if (s->ops->set_mem_map(s, &win->ctl) != 0) {
260 ds_dbg(s, 0, "failed to set_mem_map\n");
264 } /* pcmcia_map_mem_page */
265 EXPORT_SYMBOL(pcmcia_map_mem_page);
268 /** pcmcia_modify_configuration
270 * Modify a locked socket configuration
272 int pcmcia_modify_configuration(struct pcmcia_device *p_dev,
275 struct pcmcia_socket *s;
279 c = p_dev->function_config;
281 if (!(s->state & SOCKET_PRESENT))
283 if (!(c->state & CONFIG_LOCKED))
286 if (mod->Attributes & CONF_IRQ_CHANGE_VALID) {
287 if (mod->Attributes & CONF_ENABLE_IRQ) {
288 c->Attributes |= CONF_ENABLE_IRQ;
289 s->socket.io_irq = s->irq.AssignedIRQ;
291 c->Attributes &= ~CONF_ENABLE_IRQ;
292 s->socket.io_irq = 0;
294 s->ops->set_socket(s, &s->socket);
297 if (mod->Attributes & CONF_VCC_CHANGE_VALID) {
298 ds_dbg(s, 0, "changing Vcc is not allowed at this time\n");
302 /* We only allow changing Vpp1 and Vpp2 to the same value */
303 if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) &&
304 (mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
305 if (mod->Vpp1 != mod->Vpp2)
306 ds_dbg(s, 0, "Vpp1 and Vpp2 must be the same\n");
308 s->socket.Vpp = mod->Vpp1;
309 if (s->ops->set_socket(s, &s->socket)) {
310 dev_printk(KERN_WARNING, &s->dev,
311 "Unable to set VPP\n");
314 } else if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) ||
315 (mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
316 ds_dbg(s, 0, "changing Vcc is not allowed at this time\n");
320 if (mod->Attributes & CONF_IO_CHANGE_WIDTH) {
321 pccard_io_map io_off = { 0, 0, 0, 0, 1 };
325 io_on.speed = io_speed;
326 for (i = 0; i < MAX_IO_WIN; i++) {
332 io_on.flags = MAP_ACTIVE | IO_DATA_PATH_WIDTH_8;
333 io_on.start = s->io[i].res->start;
334 io_on.stop = s->io[i].res->end;
336 s->ops->set_io_map(s, &io_off);
338 s->ops->set_io_map(s, &io_on);
343 } /* modify_configuration */
344 EXPORT_SYMBOL(pcmcia_modify_configuration);
347 int pcmcia_release_configuration(struct pcmcia_device *p_dev)
349 pccard_io_map io = { 0, 0, 0, 0, 1 };
350 struct pcmcia_socket *s = p_dev->socket;
351 config_t *c = p_dev->function_config;
354 if (p_dev->_locked) {
356 if (--(s->lock_count) == 0) {
357 s->socket.flags = SS_OUTPUT_ENA; /* Is this correct? */
359 s->socket.io_irq = 0;
360 s->ops->set_socket(s, &s->socket);
363 if (c->state & CONFIG_LOCKED) {
364 c->state &= ~CONFIG_LOCKED;
365 if (c->state & CONFIG_IO_REQ)
366 for (i = 0; i < MAX_IO_WIN; i++) {
370 if (s->io[i].Config != 0)
373 s->ops->set_io_map(s, &io);
378 } /* pcmcia_release_configuration */
381 /** pcmcia_release_io
383 * Release_io() releases the I/O ranges allocated by a client. This
384 * may be invoked some time after a card ejection has already dumped
385 * the actual socket configuration, so if the client is "stale", we
386 * don't bother checking the port ranges against the current socket
389 static int pcmcia_release_io(struct pcmcia_device *p_dev, io_req_t *req)
391 struct pcmcia_socket *s = p_dev->socket;
392 config_t *c = p_dev->function_config;
399 if ((c->io.BasePort1 != req->BasePort1) ||
400 (c->io.NumPorts1 != req->NumPorts1) ||
401 (c->io.BasePort2 != req->BasePort2) ||
402 (c->io.NumPorts2 != req->NumPorts2))
405 c->state &= ~CONFIG_IO_REQ;
407 release_io_space(s, req->BasePort1, req->NumPorts1);
409 release_io_space(s, req->BasePort2, req->NumPorts2);
412 } /* pcmcia_release_io */
415 static int pcmcia_release_irq(struct pcmcia_device *p_dev, irq_req_t *req)
417 struct pcmcia_socket *s = p_dev->socket;
418 config_t *c= p_dev->function_config;
424 if (c->state & CONFIG_LOCKED)
426 if (c->irq.Attributes != req->Attributes) {
427 ds_dbg(s, 0, "IRQ attributes must match assigned ones\n");
430 if (s->irq.AssignedIRQ != req->AssignedIRQ) {
431 ds_dbg(s, 0, "IRQ must match assigned one\n");
434 if (--s->irq.Config == 0) {
435 c->state &= ~CONFIG_IRQ_REQ;
436 s->irq.AssignedIRQ = 0;
439 if (req->Attributes & IRQ_HANDLE_PRESENT) {
440 free_irq(req->AssignedIRQ, req->Instance);
443 #ifdef CONFIG_PCMCIA_PROBE
444 pcmcia_used_irq[req->AssignedIRQ]--;
448 } /* pcmcia_release_irq */
451 int pcmcia_release_window(window_handle_t win)
453 struct pcmcia_socket *s;
455 if ((win == NULL) || (win->magic != WINDOW_MAGIC))
458 if (!(win->handle->_win & CLIENT_WIN_REQ(win->index)))
461 /* Shut down memory window */
462 win->ctl.flags &= ~MAP_ACTIVE;
463 s->ops->set_mem_map(s, &win->ctl);
464 s->state &= ~SOCKET_WIN_REQ(win->index);
466 /* Release system memory */
468 release_resource(win->ctl.res);
472 win->handle->_win &= ~CLIENT_WIN_REQ(win->index);
477 } /* pcmcia_release_window */
478 EXPORT_SYMBOL(pcmcia_release_window);
481 int pcmcia_request_configuration(struct pcmcia_device *p_dev,
486 struct pcmcia_socket *s = p_dev->socket;
490 if (!(s->state & SOCKET_PRESENT))
493 if (req->IntType & INT_CARDBUS) {
494 ds_dbg(p_dev->socket, 0, "IntType may not be INT_CARDBUS\n");
497 c = p_dev->function_config;
498 if (c->state & CONFIG_LOCKED)
501 /* Do power control. We don't allow changes in Vcc. */
502 s->socket.Vpp = req->Vpp;
503 if (s->ops->set_socket(s, &s->socket)) {
504 dev_printk(KERN_WARNING, &s->dev,
505 "Unable to set socket state\n");
509 /* Pick memory or I/O card, DMA mode, interrupt */
510 c->IntType = req->IntType;
511 c->Attributes = req->Attributes;
512 if (req->IntType & INT_MEMORY_AND_IO)
513 s->socket.flags |= SS_IOCARD;
514 if (req->IntType & INT_ZOOMED_VIDEO)
515 s->socket.flags |= SS_ZVCARD | SS_IOCARD;
516 if (req->Attributes & CONF_ENABLE_DMA)
517 s->socket.flags |= SS_DMA_MODE;
518 if (req->Attributes & CONF_ENABLE_SPKR)
519 s->socket.flags |= SS_SPKR_ENA;
520 if (req->Attributes & CONF_ENABLE_IRQ)
521 s->socket.io_irq = s->irq.AssignedIRQ;
523 s->socket.io_irq = 0;
524 s->ops->set_socket(s, &s->socket);
527 /* Set up CIS configuration registers */
528 base = c->ConfigBase = req->ConfigBase;
529 c->CardValues = req->Present;
530 if (req->Present & PRESENT_COPY) {
532 pcmcia_write_cis_mem(s, 1, (base + CISREG_SCR)>>1, 1, &c->Copy);
534 if (req->Present & PRESENT_OPTION) {
535 if (s->functions == 1) {
536 c->Option = req->ConfigIndex & COR_CONFIG_MASK;
538 c->Option = req->ConfigIndex & COR_MFC_CONFIG_MASK;
539 c->Option |= COR_FUNC_ENA|COR_IREQ_ENA;
540 if (req->Present & PRESENT_IOBASE_0)
541 c->Option |= COR_ADDR_DECODE;
543 if (c->state & CONFIG_IRQ_REQ)
544 if (!(c->irq.Attributes & IRQ_FORCED_PULSE))
545 c->Option |= COR_LEVEL_REQ;
546 pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &c->Option);
549 if (req->Present & PRESENT_STATUS) {
550 c->Status = req->Status;
551 pcmcia_write_cis_mem(s, 1, (base + CISREG_CCSR)>>1, 1, &c->Status);
553 if (req->Present & PRESENT_PIN_REPLACE) {
555 pcmcia_write_cis_mem(s, 1, (base + CISREG_PRR)>>1, 1, &c->Pin);
557 if (req->Present & PRESENT_EXT_STATUS) {
558 c->ExtStatus = req->ExtStatus;
559 pcmcia_write_cis_mem(s, 1, (base + CISREG_ESR)>>1, 1, &c->ExtStatus);
561 if (req->Present & PRESENT_IOBASE_0) {
562 u_char b = c->io.BasePort1 & 0xff;
563 pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_0)>>1, 1, &b);
564 b = (c->io.BasePort1 >> 8) & 0xff;
565 pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_1)>>1, 1, &b);
567 if (req->Present & PRESENT_IOSIZE) {
568 u_char b = c->io.NumPorts1 + c->io.NumPorts2 - 1;
569 pcmcia_write_cis_mem(s, 1, (base + CISREG_IOSIZE)>>1, 1, &b);
572 /* Configure I/O windows */
573 if (c->state & CONFIG_IO_REQ) {
574 iomap.speed = io_speed;
575 for (i = 0; i < MAX_IO_WIN; i++)
578 iomap.flags = MAP_ACTIVE;
579 switch (s->io[i].res->flags & IO_DATA_PATH_WIDTH) {
580 case IO_DATA_PATH_WIDTH_16:
581 iomap.flags |= MAP_16BIT; break;
582 case IO_DATA_PATH_WIDTH_AUTO:
583 iomap.flags |= MAP_AUTOSZ; break;
587 iomap.start = s->io[i].res->start;
588 iomap.stop = s->io[i].res->end;
589 s->ops->set_io_map(s, &iomap);
594 c->state |= CONFIG_LOCKED;
597 } /* pcmcia_request_configuration */
598 EXPORT_SYMBOL(pcmcia_request_configuration);
601 /** pcmcia_request_io
603 * Request_io() reserves ranges of port addresses for a socket.
604 * I have not implemented range sharing or alias addressing.
606 int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req)
608 struct pcmcia_socket *s = p_dev->socket;
611 if (!(s->state & SOCKET_PRESENT))
616 c = p_dev->function_config;
617 if (c->state & CONFIG_LOCKED)
619 if (c->state & CONFIG_IO_REQ) {
620 ds_dbg(s, 0, "IO already configured\n");
623 if (req->Attributes1 & (IO_SHARED | IO_FORCE_ALIAS_ACCESS)) {
624 ds_dbg(s, 0, "bad attribute setting for IO region 1\n");
627 if ((req->NumPorts2 > 0) &&
628 (req->Attributes2 & (IO_SHARED | IO_FORCE_ALIAS_ACCESS))) {
629 ds_dbg(s, 0, "bad attribute setting for IO region 2\n");
633 ds_dbg(s, 1, "trying to allocate resource 1\n");
634 if (alloc_io_space(s, req->Attributes1, &req->BasePort1,
635 req->NumPorts1, req->IOAddrLines)) {
636 ds_dbg(s, 0, "allocation of resource 1 failed\n");
640 if (req->NumPorts2) {
641 ds_dbg(s, 1, "trying to allocate resource 2\n");
642 if (alloc_io_space(s, req->Attributes2, &req->BasePort2,
643 req->NumPorts2, req->IOAddrLines)) {
644 ds_dbg(s, 0, "allocation of resource 2 failed\n");
645 release_io_space(s, req->BasePort1, req->NumPorts1);
651 c->state |= CONFIG_IO_REQ;
654 } /* pcmcia_request_io */
655 EXPORT_SYMBOL(pcmcia_request_io);
658 /** pcmcia_request_irq
660 * Request_irq() reserves an irq for this client.
662 * Also, since Linux only reserves irq's when they are actually
663 * hooked, we don't guarantee that an irq will still be available
664 * when the configuration is locked. Now that I think about it,
665 * there might be a way to fix this using a dummy handler.
668 #ifdef CONFIG_PCMCIA_PROBE
669 static irqreturn_t test_action(int cpl, void *dev_id)
675 int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req)
677 struct pcmcia_socket *s = p_dev->socket;
679 int ret = -EINVAL, irq = 0;
682 if (!(s->state & SOCKET_PRESENT))
684 c = p_dev->function_config;
685 if (c->state & CONFIG_LOCKED)
687 if (c->state & CONFIG_IRQ_REQ) {
688 ds_dbg(s, 0, "IRQ already configured\n");
692 /* Decide what type of interrupt we are registering */
694 if (s->functions > 1) /* All of this ought to be handled higher up */
696 if (req->Attributes & IRQ_TYPE_DYNAMIC_SHARING)
699 #ifdef CONFIG_PCMCIA_PROBE
702 /* if the underlying IRQ infrastructure allows for it, only allocate
703 * the IRQ, but do not enable it
705 if (!(req->Attributes & IRQ_HANDLE_PRESENT))
706 type |= IRQ_NOAUTOEN;
707 #endif /* IRQ_NOAUTOEN */
709 if (s->irq.AssignedIRQ != 0) {
710 /* If the interrupt is already assigned, it must be the same */
711 irq = s->irq.AssignedIRQ;
714 u32 mask = s->irq_mask;
715 void *data = &p_dev->dev.driver; /* something unique to this device */
717 for (try = 0; try < 64; try++) {
720 /* marked as available by driver, and not blocked by userspace? */
721 if (!((mask >> irq) & 1))
724 /* avoid an IRQ which is already used by a PCMCIA card */
725 if ((try < 32) && pcmcia_used_irq[irq])
728 /* register the correct driver, if possible, of check whether
729 * registering a dummy handle works, i.e. if the IRQ isn't
730 * marked as used by the kernel resource management core */
731 ret = request_irq(irq,
732 (req->Attributes & IRQ_HANDLE_PRESENT) ? req->Handler : test_action,
735 (req->Attributes & IRQ_HANDLE_PRESENT) ? req->Instance : data);
737 if (!(req->Attributes & IRQ_HANDLE_PRESENT))
744 /* only assign PCI irq if no IRQ already assigned */
745 if (ret && !s->irq.AssignedIRQ) {
752 if (ret && (req->Attributes & IRQ_HANDLE_PRESENT)) {
753 ret = request_irq(irq, req->Handler, type,
754 p_dev->devname, req->Instance);
759 /* Make sure the fact the request type was overridden is passed back */
760 if (type == IRQF_SHARED && !(req->Attributes & IRQ_TYPE_DYNAMIC_SHARING)) {
761 req->Attributes |= IRQ_TYPE_DYNAMIC_SHARING;
762 dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: "
763 "request for exclusive IRQ could not be fulfilled.\n");
764 dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: the driver "
765 "needs updating to supported shared IRQ lines.\n");
767 c->irq.Attributes = req->Attributes;
768 s->irq.AssignedIRQ = req->AssignedIRQ = irq;
771 c->state |= CONFIG_IRQ_REQ;
774 #ifdef CONFIG_PCMCIA_PROBE
775 pcmcia_used_irq[irq]++;
779 } /* pcmcia_request_irq */
780 EXPORT_SYMBOL(pcmcia_request_irq);
783 /** pcmcia_request_window
785 * Request_window() establishes a mapping between card memory space
786 * and system memory space.
788 int pcmcia_request_window(struct pcmcia_device **p_dev, win_req_t *req, window_handle_t *wh)
790 struct pcmcia_socket *s = (*p_dev)->socket;
795 if (!(s->state & SOCKET_PRESENT))
797 if (req->Attributes & (WIN_PAGED | WIN_SHARED)) {
798 ds_dbg(s, 0, "bad attribute setting for iomem region\n");
802 /* Window size defaults to smallest available */
804 req->Size = s->map_size;
805 align = (((s->features & SS_CAP_MEM_ALIGN) ||
806 (req->Attributes & WIN_STRICT_ALIGN)) ?
807 req->Size : s->map_size);
808 if (req->Size & (s->map_size-1)) {
809 ds_dbg(s, 0, "invalid map size\n");
812 if ((req->Base && (s->features & SS_CAP_STATIC_MAP)) ||
813 (req->Base & (align-1))) {
814 ds_dbg(s, 0, "invalid base address\n");
820 /* Allocate system memory window */
821 for (w = 0; w < MAX_WIN; w++)
822 if (!(s->state & SOCKET_WIN_REQ(w))) break;
824 ds_dbg(s, 0, "all windows are used already\n");
829 win->magic = WINDOW_MAGIC;
831 win->handle = *p_dev;
834 if (!(s->features & SS_CAP_STATIC_MAP)) {
835 win->ctl.res = pcmcia_find_mem_region(req->Base, req->Size, align,
836 (req->Attributes & WIN_MAP_BELOW_1MB), s);
838 ds_dbg(s, 0, "allocating mem region failed\n");
842 (*p_dev)->_win |= CLIENT_WIN_REQ(w);
844 /* Configure the socket controller */
847 win->ctl.speed = req->AccessSpeed;
848 if (req->Attributes & WIN_MEMORY_TYPE)
849 win->ctl.flags |= MAP_ATTRIB;
850 if (req->Attributes & WIN_ENABLE)
851 win->ctl.flags |= MAP_ACTIVE;
852 if (req->Attributes & WIN_DATA_WIDTH_16)
853 win->ctl.flags |= MAP_16BIT;
854 if (req->Attributes & WIN_USE_WAIT)
855 win->ctl.flags |= MAP_USE_WAIT;
856 win->ctl.card_start = 0;
857 if (s->ops->set_mem_map(s, &win->ctl) != 0) {
858 ds_dbg(s, 0, "failed to set memory mapping\n");
861 s->state |= SOCKET_WIN_REQ(w);
863 /* Return window handle */
864 if (s->features & SS_CAP_STATIC_MAP) {
865 req->Base = win->ctl.static_start;
867 req->Base = win->ctl.res->start;
872 } /* pcmcia_request_window */
873 EXPORT_SYMBOL(pcmcia_request_window);
875 void pcmcia_disable_device(struct pcmcia_device *p_dev) {
876 pcmcia_release_configuration(p_dev);
877 pcmcia_release_io(p_dev, &p_dev->io);
878 pcmcia_release_irq(p_dev, &p_dev->irq);
880 pcmcia_release_window(p_dev->win);
882 EXPORT_SYMBOL(pcmcia_disable_device);
885 struct pcmcia_cfg_mem {
889 cistpl_cftable_entry_t dflt;
893 * pcmcia_loop_config() - loop over configuration options
894 * @p_dev: the struct pcmcia_device which we need to loop for.
895 * @conf_check: function to call for each configuration option.
896 * It gets passed the struct pcmcia_device, the CIS data
897 * describing the configuration option, and private data
898 * being passed to pcmcia_loop_config()
899 * @priv_data: private data to be passed to the conf_check function.
901 * pcmcia_loop_config() loops over all configuration options, and calls
902 * the driver-specific conf_check() for each one, checking whether
905 int pcmcia_loop_config(struct pcmcia_device *p_dev,
906 int (*conf_check) (struct pcmcia_device *p_dev,
907 cistpl_cftable_entry_t *cfg,
908 cistpl_cftable_entry_t *dflt,
913 struct pcmcia_cfg_mem *cfg_mem;
919 cfg_mem = kzalloc(sizeof(struct pcmcia_cfg_mem), GFP_KERNEL);
923 /* get the current Vcc setting */
924 vcc = p_dev->socket->socket.Vcc;
926 tuple = &cfg_mem->tuple;
927 tuple->TupleData = cfg_mem->buf;
928 tuple->TupleDataMax = 255;
929 tuple->TupleOffset = 0;
930 tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
931 tuple->Attributes = 0;
933 ret = pcmcia_get_first_tuple(p_dev, tuple);
935 cistpl_cftable_entry_t *cfg = &cfg_mem->parse.cftable_entry;
937 if (pcmcia_get_tuple_data(p_dev, tuple))
940 if (pcmcia_parse_tuple(tuple, &cfg_mem->parse))
944 p_dev->conf.ConfigIndex = cfg->index;
945 if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
946 cfg_mem->dflt = *cfg;
948 ret = conf_check(p_dev, cfg, &cfg_mem->dflt, vcc, priv_data);
953 ret = pcmcia_get_next_tuple(p_dev, tuple);
958 EXPORT_SYMBOL(pcmcia_loop_config);