i2c-algo-pcf: Pass adapter data into ->waitforpin() method
[linux-2.6] / drivers / i2c / busses / i2c-omap.c
1 /*
2  * TI OMAP I2C master mode driver
3  *
4  * Copyright (C) 2003 MontaVista Software, Inc.
5  * Copyright (C) 2004 Texas Instruments.
6  *
7  * Updated to work with multiple I2C interfaces on 24xx by
8  * Tony Lindgren <tony@atomide.com> and Imre Deak <imre.deak@nokia.com>
9  * Copyright (C) 2005 Nokia Corporation
10  *
11  * Cleaned up by Juha Yrjölä <juha.yrjola@nokia.com>
12  *
13  * This program is free software; you can redistribute it and/or modify
14  * it under the terms of the GNU General Public License as published by
15  * the Free Software Foundation; either version 2 of the License, or
16  * (at your option) any later version.
17  *
18  * This program is distributed in the hope that it will be useful,
19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21  * GNU General Public License for more details.
22  *
23  * You should have received a copy of the GNU General Public License
24  * along with this program; if not, write to the Free Software
25  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26  */
27
28 #include <linux/module.h>
29 #include <linux/delay.h>
30 #include <linux/i2c.h>
31 #include <linux/err.h>
32 #include <linux/interrupt.h>
33 #include <linux/completion.h>
34 #include <linux/platform_device.h>
35 #include <linux/clk.h>
36
37 #include <asm/io.h>
38
39 /* timeout waiting for the controller to respond */
40 #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
41
42 #define OMAP_I2C_REV_REG                0x00
43 #define OMAP_I2C_IE_REG                 0x04
44 #define OMAP_I2C_STAT_REG               0x08
45 #define OMAP_I2C_IV_REG                 0x0c
46 #define OMAP_I2C_SYSS_REG               0x10
47 #define OMAP_I2C_BUF_REG                0x14
48 #define OMAP_I2C_CNT_REG                0x18
49 #define OMAP_I2C_DATA_REG               0x1c
50 #define OMAP_I2C_SYSC_REG               0x20
51 #define OMAP_I2C_CON_REG                0x24
52 #define OMAP_I2C_OA_REG                 0x28
53 #define OMAP_I2C_SA_REG                 0x2c
54 #define OMAP_I2C_PSC_REG                0x30
55 #define OMAP_I2C_SCLL_REG               0x34
56 #define OMAP_I2C_SCLH_REG               0x38
57 #define OMAP_I2C_SYSTEST_REG            0x3c
58
59 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */
60 #define OMAP_I2C_IE_XRDY        (1 << 4)        /* TX data ready int enable */
61 #define OMAP_I2C_IE_RRDY        (1 << 3)        /* RX data ready int enable */
62 #define OMAP_I2C_IE_ARDY        (1 << 2)        /* Access ready int enable */
63 #define OMAP_I2C_IE_NACK        (1 << 1)        /* No ack interrupt enable */
64 #define OMAP_I2C_IE_AL          (1 << 0)        /* Arbitration lost int ena */
65
66 /* I2C Status Register (OMAP_I2C_STAT): */
67 #define OMAP_I2C_STAT_SBD       (1 << 15)       /* Single byte data */
68 #define OMAP_I2C_STAT_BB        (1 << 12)       /* Bus busy */
69 #define OMAP_I2C_STAT_ROVR      (1 << 11)       /* Receive overrun */
70 #define OMAP_I2C_STAT_XUDF      (1 << 10)       /* Transmit underflow */
71 #define OMAP_I2C_STAT_AAS       (1 << 9)        /* Address as slave */
72 #define OMAP_I2C_STAT_AD0       (1 << 8)        /* Address zero */
73 #define OMAP_I2C_STAT_XRDY      (1 << 4)        /* Transmit data ready */
74 #define OMAP_I2C_STAT_RRDY      (1 << 3)        /* Receive data ready */
75 #define OMAP_I2C_STAT_ARDY      (1 << 2)        /* Register access ready */
76 #define OMAP_I2C_STAT_NACK      (1 << 1)        /* No ack interrupt enable */
77 #define OMAP_I2C_STAT_AL        (1 << 0)        /* Arbitration lost int ena */
78
79 /* I2C Buffer Configuration Register (OMAP_I2C_BUF): */
80 #define OMAP_I2C_BUF_RDMA_EN    (1 << 15)       /* RX DMA channel enable */
81 #define OMAP_I2C_BUF_XDMA_EN    (1 << 7)        /* TX DMA channel enable */
82
83 /* I2C Configuration Register (OMAP_I2C_CON): */
84 #define OMAP_I2C_CON_EN         (1 << 15)       /* I2C module enable */
85 #define OMAP_I2C_CON_BE         (1 << 14)       /* Big endian mode */
86 #define OMAP_I2C_CON_STB        (1 << 11)       /* Start byte mode (master) */
87 #define OMAP_I2C_CON_MST        (1 << 10)       /* Master/slave mode */
88 #define OMAP_I2C_CON_TRX        (1 << 9)        /* TX/RX mode (master only) */
89 #define OMAP_I2C_CON_XA         (1 << 8)        /* Expand address */
90 #define OMAP_I2C_CON_RM         (1 << 2)        /* Repeat mode (master only) */
91 #define OMAP_I2C_CON_STP        (1 << 1)        /* Stop cond (master only) */
92 #define OMAP_I2C_CON_STT        (1 << 0)        /* Start condition (master) */
93
94 /* I2C System Test Register (OMAP_I2C_SYSTEST): */
95 #ifdef DEBUG
96 #define OMAP_I2C_SYSTEST_ST_EN          (1 << 15)       /* System test enable */
97 #define OMAP_I2C_SYSTEST_FREE           (1 << 14)       /* Free running mode */
98 #define OMAP_I2C_SYSTEST_TMODE_MASK     (3 << 12)       /* Test mode select */
99 #define OMAP_I2C_SYSTEST_TMODE_SHIFT    (12)            /* Test mode select */
100 #define OMAP_I2C_SYSTEST_SCL_I          (1 << 3)        /* SCL line sense in */
101 #define OMAP_I2C_SYSTEST_SCL_O          (1 << 2)        /* SCL line drive out */
102 #define OMAP_I2C_SYSTEST_SDA_I          (1 << 1)        /* SDA line sense in */
103 #define OMAP_I2C_SYSTEST_SDA_O          (1 << 0)        /* SDA line drive out */
104 #endif
105
106 /* I2C System Status register (OMAP_I2C_SYSS): */
107 #define OMAP_I2C_SYSS_RDONE             (1 << 0)        /* Reset Done */
108
109 /* I2C System Configuration Register (OMAP_I2C_SYSC): */
110 #define OMAP_I2C_SYSC_SRST              (1 << 1)        /* Soft Reset */
111
112 /* REVISIT: Use platform_data instead of module parameters */
113 /* Fast Mode = 400 kHz, Standard = 100 kHz */
114 static int clock = 100; /* Default: 100 kHz */
115 module_param(clock, int, 0);
116 MODULE_PARM_DESC(clock, "Set I2C clock in kHz: 400=fast mode (default == 100)");
117
118 struct omap_i2c_dev {
119         struct device           *dev;
120         void __iomem            *base;          /* virtual */
121         int                     irq;
122         struct clk              *iclk;          /* Interface clock */
123         struct clk              *fclk;          /* Functional clock */
124         struct completion       cmd_complete;
125         struct resource         *ioarea;
126         u16                     cmd_err;
127         u8                      *buf;
128         size_t                  buf_len;
129         struct i2c_adapter      adapter;
130         unsigned                rev1:1;
131         unsigned                idle:1;
132         u16                     iestate;        /* Saved interrupt register */
133 };
134
135 static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
136                                       int reg, u16 val)
137 {
138         __raw_writew(val, i2c_dev->base + reg);
139 }
140
141 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
142 {
143         return __raw_readw(i2c_dev->base + reg);
144 }
145
146 static int omap_i2c_get_clocks(struct omap_i2c_dev *dev)
147 {
148         if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
149                 dev->iclk = clk_get(dev->dev, "i2c_ick");
150                 if (IS_ERR(dev->iclk)) {
151                         dev->iclk = NULL;
152                         return -ENODEV;
153                 }
154         }
155
156         dev->fclk = clk_get(dev->dev, "i2c_fck");
157         if (IS_ERR(dev->fclk)) {
158                 if (dev->iclk != NULL) {
159                         clk_put(dev->iclk);
160                         dev->iclk = NULL;
161                 }
162                 dev->fclk = NULL;
163                 return -ENODEV;
164         }
165
166         return 0;
167 }
168
169 static void omap_i2c_put_clocks(struct omap_i2c_dev *dev)
170 {
171         clk_put(dev->fclk);
172         dev->fclk = NULL;
173         if (dev->iclk != NULL) {
174                 clk_put(dev->iclk);
175                 dev->iclk = NULL;
176         }
177 }
178
179 static void omap_i2c_unidle(struct omap_i2c_dev *dev)
180 {
181         if (dev->iclk != NULL)
182                 clk_enable(dev->iclk);
183         clk_enable(dev->fclk);
184         if (dev->iestate)
185                 omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
186         dev->idle = 0;
187 }
188
189 static void omap_i2c_idle(struct omap_i2c_dev *dev)
190 {
191         u16 iv;
192
193         dev->idle = 1;
194         dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
195         omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
196         if (dev->rev1)
197                 iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);   /* Read clears */
198         else
199                 omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
200         clk_disable(dev->fclk);
201         if (dev->iclk != NULL)
202                 clk_disable(dev->iclk);
203 }
204
205 static int omap_i2c_init(struct omap_i2c_dev *dev)
206 {
207         u16 psc = 0;
208         unsigned long fclk_rate = 12000000;
209         unsigned long timeout;
210
211         if (!dev->rev1) {
212                 omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, OMAP_I2C_SYSC_SRST);
213                 /* For some reason we need to set the EN bit before the
214                  * reset done bit gets set. */
215                 timeout = jiffies + OMAP_I2C_TIMEOUT;
216                 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
217                 while (!(omap_i2c_read_reg(dev, OMAP_I2C_SYSS_REG) &
218                          OMAP_I2C_SYSS_RDONE)) {
219                         if (time_after(jiffies, timeout)) {
220                                 dev_warn(dev->dev, "timeout waiting "
221                                                 "for controller reset\n");
222                                 return -ETIMEDOUT;
223                         }
224                         msleep(1);
225                 }
226         }
227         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
228
229         if (cpu_class_is_omap1()) {
230                 struct clk *armxor_ck;
231
232                 armxor_ck = clk_get(NULL, "armxor_ck");
233                 if (IS_ERR(armxor_ck))
234                         dev_warn(dev->dev, "Could not get armxor_ck\n");
235                 else {
236                         fclk_rate = clk_get_rate(armxor_ck);
237                         clk_put(armxor_ck);
238                 }
239                 /* TRM for 5912 says the I2C clock must be prescaled to be
240                  * between 7 - 12 MHz. The XOR input clock is typically
241                  * 12, 13 or 19.2 MHz. So we should have code that produces:
242                  *
243                  * XOR MHz      Divider         Prescaler
244                  * 12           1               0
245                  * 13           2               1
246                  * 19.2         2               1
247                  */
248                 if (fclk_rate > 12000000)
249                         psc = fclk_rate / 12000000;
250         }
251
252         /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
253         omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, psc);
254
255         /* Program desired operating rate */
256         fclk_rate /= (psc + 1) * 1000;
257         if (psc > 2)
258                 psc = 2;
259
260         omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG,
261                            fclk_rate / (clock * 2) - 7 + psc);
262         omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG,
263                            fclk_rate / (clock * 2) - 7 + psc);
264
265         /* Take the I2C module out of reset: */
266         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
267
268         /* Enable interrupts */
269         omap_i2c_write_reg(dev, OMAP_I2C_IE_REG,
270                            (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
271                             OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
272                             OMAP_I2C_IE_AL));
273         return 0;
274 }
275
276 /*
277  * Waiting on Bus Busy
278  */
279 static int omap_i2c_wait_for_bb(struct omap_i2c_dev *dev)
280 {
281         unsigned long timeout;
282
283         timeout = jiffies + OMAP_I2C_TIMEOUT;
284         while (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) {
285                 if (time_after(jiffies, timeout)) {
286                         dev_warn(dev->dev, "timeout waiting for bus ready\n");
287                         return -ETIMEDOUT;
288                 }
289                 msleep(1);
290         }
291
292         return 0;
293 }
294
295 /*
296  * Low level master read/write transaction.
297  */
298 static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
299                              struct i2c_msg *msg, int stop)
300 {
301         struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
302         int r;
303         u16 w;
304
305         dev_dbg(dev->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
306                 msg->addr, msg->len, msg->flags, stop);
307
308         if (msg->len == 0)
309                 return -EINVAL;
310
311         omap_i2c_write_reg(dev, OMAP_I2C_SA_REG, msg->addr);
312
313         /* REVISIT: Could the STB bit of I2C_CON be used with probing? */
314         dev->buf = msg->buf;
315         dev->buf_len = msg->len;
316
317         omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len);
318
319         init_completion(&dev->cmd_complete);
320         dev->cmd_err = 0;
321
322         w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT;
323         if (msg->flags & I2C_M_TEN)
324                 w |= OMAP_I2C_CON_XA;
325         if (!(msg->flags & I2C_M_RD))
326                 w |= OMAP_I2C_CON_TRX;
327         if (stop)
328                 w |= OMAP_I2C_CON_STP;
329         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
330
331         r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
332                                                       OMAP_I2C_TIMEOUT);
333         dev->buf_len = 0;
334         if (r < 0)
335                 return r;
336         if (r == 0) {
337                 dev_err(dev->dev, "controller timed out\n");
338                 omap_i2c_init(dev);
339                 return -ETIMEDOUT;
340         }
341
342         if (likely(!dev->cmd_err))
343                 return 0;
344
345         /* We have an error */
346         if (dev->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR |
347                             OMAP_I2C_STAT_XUDF)) {
348                 omap_i2c_init(dev);
349                 return -EIO;
350         }
351
352         if (dev->cmd_err & OMAP_I2C_STAT_NACK) {
353                 if (msg->flags & I2C_M_IGNORE_NAK)
354                         return 0;
355                 if (stop) {
356                         w = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
357                         w |= OMAP_I2C_CON_STP;
358                         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
359                 }
360                 return -EREMOTEIO;
361         }
362         return -EIO;
363 }
364
365
366 /*
367  * Prepare controller for a transaction and call omap_i2c_xfer_msg
368  * to do the work during IRQ processing.
369  */
370 static int
371 omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
372 {
373         struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
374         int i;
375         int r;
376
377         omap_i2c_unidle(dev);
378
379         if ((r = omap_i2c_wait_for_bb(dev)) < 0)
380                 goto out;
381
382         for (i = 0; i < num; i++) {
383                 r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
384                 if (r != 0)
385                         break;
386         }
387
388         if (r == 0)
389                 r = num;
390 out:
391         omap_i2c_idle(dev);
392         return r;
393 }
394
395 static u32
396 omap_i2c_func(struct i2c_adapter *adap)
397 {
398         return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
399 }
400
401 static inline void
402 omap_i2c_complete_cmd(struct omap_i2c_dev *dev, u16 err)
403 {
404         dev->cmd_err |= err;
405         complete(&dev->cmd_complete);
406 }
407
408 static inline void
409 omap_i2c_ack_stat(struct omap_i2c_dev *dev, u16 stat)
410 {
411         omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
412 }
413
414 static irqreturn_t
415 omap_i2c_rev1_isr(int this_irq, void *dev_id)
416 {
417         struct omap_i2c_dev *dev = dev_id;
418         u16 iv, w;
419
420         if (dev->idle)
421                 return IRQ_NONE;
422
423         iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);
424         switch (iv) {
425         case 0x00:      /* None */
426                 break;
427         case 0x01:      /* Arbitration lost */
428                 dev_err(dev->dev, "Arbitration lost\n");
429                 omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_AL);
430                 break;
431         case 0x02:      /* No acknowledgement */
432                 omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_NACK);
433                 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_STP);
434                 break;
435         case 0x03:      /* Register access ready */
436                 omap_i2c_complete_cmd(dev, 0);
437                 break;
438         case 0x04:      /* Receive data ready */
439                 if (dev->buf_len) {
440                         w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
441                         *dev->buf++ = w;
442                         dev->buf_len--;
443                         if (dev->buf_len) {
444                                 *dev->buf++ = w >> 8;
445                                 dev->buf_len--;
446                         }
447                 } else
448                         dev_err(dev->dev, "RRDY IRQ while no data requested\n");
449                 break;
450         case 0x05:      /* Transmit data ready */
451                 if (dev->buf_len) {
452                         w = *dev->buf++;
453                         dev->buf_len--;
454                         if (dev->buf_len) {
455                                 w |= *dev->buf++ << 8;
456                                 dev->buf_len--;
457                         }
458                         omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
459                 } else
460                         dev_err(dev->dev, "XRDY IRQ while no data to send\n");
461                 break;
462         default:
463                 return IRQ_NONE;
464         }
465
466         return IRQ_HANDLED;
467 }
468
469 static irqreturn_t
470 omap_i2c_isr(int this_irq, void *dev_id)
471 {
472         struct omap_i2c_dev *dev = dev_id;
473         u16 bits;
474         u16 stat, w;
475         int count = 0;
476
477         if (dev->idle)
478                 return IRQ_NONE;
479
480         bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
481         while ((stat = (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG))) & bits) {
482                 dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat);
483                 if (count++ == 100) {
484                         dev_warn(dev->dev, "Too much work in one IRQ\n");
485                         break;
486                 }
487
488                 omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
489
490                 if (stat & OMAP_I2C_STAT_ARDY) {
491                         omap_i2c_complete_cmd(dev, 0);
492                         continue;
493                 }
494                 if (stat & OMAP_I2C_STAT_RRDY) {
495                         w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
496                         if (dev->buf_len) {
497                                 *dev->buf++ = w;
498                                 dev->buf_len--;
499                                 if (dev->buf_len) {
500                                         *dev->buf++ = w >> 8;
501                                         dev->buf_len--;
502                                 }
503                         } else
504                                 dev_err(dev->dev, "RRDY IRQ while no data "
505                                                 "requested\n");
506                         omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RRDY);
507                         continue;
508                 }
509                 if (stat & OMAP_I2C_STAT_XRDY) {
510                         w = 0;
511                         if (dev->buf_len) {
512                                 w = *dev->buf++;
513                                 dev->buf_len--;
514                                 if (dev->buf_len) {
515                                         w |= *dev->buf++ << 8;
516                                         dev->buf_len--;
517                                 }
518                         } else
519                                 dev_err(dev->dev, "XRDY IRQ while no "
520                                         "data to send\n");
521                         omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
522                         omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY);
523                         continue;
524                 }
525                 if (stat & OMAP_I2C_STAT_ROVR) {
526                         dev_err(dev->dev, "Receive overrun\n");
527                         dev->cmd_err |= OMAP_I2C_STAT_ROVR;
528                 }
529                 if (stat & OMAP_I2C_STAT_XUDF) {
530                         dev_err(dev->dev, "Transmit overflow\n");
531                         dev->cmd_err |= OMAP_I2C_STAT_XUDF;
532                 }
533                 if (stat & OMAP_I2C_STAT_NACK) {
534                         omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_NACK);
535                         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
536                                            OMAP_I2C_CON_STP);
537                 }
538                 if (stat & OMAP_I2C_STAT_AL) {
539                         dev_err(dev->dev, "Arbitration lost\n");
540                         omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_AL);
541                 }
542         }
543
544         return count ? IRQ_HANDLED : IRQ_NONE;
545 }
546
547 static const struct i2c_algorithm omap_i2c_algo = {
548         .master_xfer    = omap_i2c_xfer,
549         .functionality  = omap_i2c_func,
550 };
551
552 static int
553 omap_i2c_probe(struct platform_device *pdev)
554 {
555         struct omap_i2c_dev     *dev;
556         struct i2c_adapter      *adap;
557         struct resource         *mem, *irq, *ioarea;
558         int r;
559
560         /* NOTE: driver uses the static register mapping */
561         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
562         if (!mem) {
563                 dev_err(&pdev->dev, "no mem resource?\n");
564                 return -ENODEV;
565         }
566         irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
567         if (!irq) {
568                 dev_err(&pdev->dev, "no irq resource?\n");
569                 return -ENODEV;
570         }
571
572         ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1,
573                         pdev->name);
574         if (!ioarea) {
575                 dev_err(&pdev->dev, "I2C region already claimed\n");
576                 return -EBUSY;
577         }
578
579         if (clock > 200)
580                 clock = 400;    /* Fast mode */
581         else
582                 clock = 100;    /* Standard mode */
583
584         dev = kzalloc(sizeof(struct omap_i2c_dev), GFP_KERNEL);
585         if (!dev) {
586                 r = -ENOMEM;
587                 goto err_release_region;
588         }
589
590         dev->dev = &pdev->dev;
591         dev->irq = irq->start;
592         dev->base = ioremap(mem->start, mem->end - mem->start + 1);
593         if (!dev->base) {
594                 r = -ENOMEM;
595                 goto err_free_mem;
596         }
597
598         platform_set_drvdata(pdev, dev);
599
600         if ((r = omap_i2c_get_clocks(dev)) != 0)
601                 goto err_iounmap;
602
603         omap_i2c_unidle(dev);
604
605         if (cpu_is_omap15xx())
606                 dev->rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) < 0x20;
607
608         /* reset ASAP, clearing any IRQs */
609         omap_i2c_init(dev);
610
611         r = request_irq(dev->irq, dev->rev1 ? omap_i2c_rev1_isr : omap_i2c_isr,
612                         0, pdev->name, dev);
613
614         if (r) {
615                 dev_err(dev->dev, "failure requesting irq %i\n", dev->irq);
616                 goto err_unuse_clocks;
617         }
618         r = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
619         dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n",
620                  pdev->id, r >> 4, r & 0xf, clock);
621
622         adap = &dev->adapter;
623         i2c_set_adapdata(adap, dev);
624         adap->owner = THIS_MODULE;
625         adap->class = I2C_CLASS_HWMON;
626         strncpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
627         adap->algo = &omap_i2c_algo;
628         adap->dev.parent = &pdev->dev;
629
630         /* i2c device drivers may be active on return from add_adapter() */
631         adap->nr = pdev->id;
632         r = i2c_add_numbered_adapter(adap);
633         if (r) {
634                 dev_err(dev->dev, "failure adding adapter\n");
635                 goto err_free_irq;
636         }
637
638         omap_i2c_idle(dev);
639
640         return 0;
641
642 err_free_irq:
643         free_irq(dev->irq, dev);
644 err_unuse_clocks:
645         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
646         omap_i2c_idle(dev);
647         omap_i2c_put_clocks(dev);
648 err_iounmap:
649         iounmap(dev->base);
650 err_free_mem:
651         platform_set_drvdata(pdev, NULL);
652         kfree(dev);
653 err_release_region:
654         release_mem_region(mem->start, (mem->end - mem->start) + 1);
655
656         return r;
657 }
658
659 static int
660 omap_i2c_remove(struct platform_device *pdev)
661 {
662         struct omap_i2c_dev     *dev = platform_get_drvdata(pdev);
663         struct resource         *mem;
664
665         platform_set_drvdata(pdev, NULL);
666
667         free_irq(dev->irq, dev);
668         i2c_del_adapter(&dev->adapter);
669         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
670         omap_i2c_put_clocks(dev);
671         iounmap(dev->base);
672         kfree(dev);
673         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
674         release_mem_region(mem->start, (mem->end - mem->start) + 1);
675         return 0;
676 }
677
678 static struct platform_driver omap_i2c_driver = {
679         .probe          = omap_i2c_probe,
680         .remove         = omap_i2c_remove,
681         .driver         = {
682                 .name   = "i2c_omap",
683                 .owner  = THIS_MODULE,
684         },
685 };
686
687 /* I2C may be needed to bring up other drivers */
688 static int __init
689 omap_i2c_init_driver(void)
690 {
691         return platform_driver_register(&omap_i2c_driver);
692 }
693 subsys_initcall(omap_i2c_init_driver);
694
695 static void __exit omap_i2c_exit_driver(void)
696 {
697         platform_driver_unregister(&omap_i2c_driver);
698 }
699 module_exit(omap_i2c_exit_driver);
700
701 MODULE_AUTHOR("MontaVista Software, Inc. (and others)");
702 MODULE_DESCRIPTION("TI OMAP I2C bus adapter");
703 MODULE_LICENSE("GPL");
704 MODULE_ALIAS("platform:i2c_omap");