2 * linux/arch/alpha/kernel/core_cia.c
4 * Written by David A Rusling (david.rusling@reo.mts.dec.com).
7 * Copyright (C) 1995 David A Rusling
8 * Copyright (C) 1997, 1998 Jay Estabrook
9 * Copyright (C) 1998, 1999, 2000 Richard Henderson
11 * Code common to all CIA core logic chips.
14 #define __EXTERN_INLINE inline
16 #include <asm/core_cia.h>
17 #undef __EXTERN_INLINE
19 #include <linux/types.h>
20 #include <linux/pci.h>
21 #include <linux/sched.h>
22 #include <linux/init.h>
23 #include <linux/bootmem.h>
25 #include <asm/ptrace.h>
32 * NOTE: Herein lie back-to-back mb instructions. They are magic.
33 * One plausible explanation is that the i/o controller does not properly
34 * handle the system transaction. Another involves timing. Ho hum.
37 #define DEBUG_CONFIG 0
39 # define DBGC(args) printk args
44 #define vip volatile int *
47 * Given a bus, device, and function number, compute resulting
48 * configuration space address. It is therefore not safe to have
49 * concurrent invocations to configuration space access routines, but
50 * there really shouldn't be any need for this.
54 * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
55 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
56 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
57 * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
58 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
60 * 31:11 Device select bit.
61 * 10:8 Function number
66 * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
67 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
68 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
69 * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
70 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
73 * 23:16 bus number (8 bits = 128 possible buses)
74 * 15:11 Device number (5 bits)
75 * 10:8 function number
79 * The function number selects which function of a multi-function device
80 * (e.g., SCSI and Ethernet).
82 * The register selects a DWORD (32 bit) register offset. Hence it
83 * doesn't get shifted by 2 bits as we want to "drop" the bottom two
88 mk_conf_addr(struct pci_bus *bus_dev, unsigned int device_fn, int where,
89 unsigned long *pci_addr, unsigned char *type1)
91 u8 bus = bus_dev->number;
94 *pci_addr = (bus << 16) | (device_fn << 8) | where;
96 DBGC(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
97 " returning address 0x%p\n"
98 bus, device_fn, where, *pci_addr));
104 conf_read(unsigned long addr, unsigned char type1)
110 DBGC(("conf_read(addr=0x%lx, type1=%d) ", addr, type1));
111 local_irq_save(flags);
113 /* Reset status register to avoid losing errors. */
114 stat0 = *(vip)CIA_IOC_CIA_ERR;
115 *(vip)CIA_IOC_CIA_ERR = stat0;
117 *(vip)CIA_IOC_CIA_ERR; /* re-read to force write */
119 /* If Type1 access, must set CIA CFG. */
121 cia_cfg = *(vip)CIA_IOC_CFG;
122 *(vip)CIA_IOC_CFG = (cia_cfg & ~3) | 1;
129 mcheck_expected(0) = 1;
133 /* Access configuration space. */
137 if (mcheck_taken(0)) {
142 mcheck_expected(0) = 0;
145 /* If Type1 access, must reset IOC CFG so normal IO space ops work. */
147 *(vip)CIA_IOC_CFG = cia_cfg;
152 local_irq_restore(flags);
159 conf_write(unsigned long addr, unsigned int value, unsigned char type1)
162 int stat0, cia_cfg = 0;
164 DBGC(("conf_write(addr=0x%lx, type1=%d) ", addr, type1));
165 local_irq_save(flags);
167 /* Reset status register to avoid losing errors. */
168 stat0 = *(vip)CIA_IOC_CIA_ERR;
169 *(vip)CIA_IOC_CIA_ERR = stat0;
171 *(vip)CIA_IOC_CIA_ERR; /* re-read to force write */
173 /* If Type1 access, must set CIA CFG. */
175 cia_cfg = *(vip)CIA_IOC_CFG;
176 *(vip)CIA_IOC_CFG = (cia_cfg & ~3) | 1;
183 mcheck_expected(0) = 1;
187 /* Access configuration space. */
190 *(vip)addr; /* read back to force the write */
192 mcheck_expected(0) = 0;
195 /* If Type1 access, must reset IOC CFG so normal IO space ops work. */
197 *(vip)CIA_IOC_CFG = cia_cfg;
202 local_irq_restore(flags);
207 cia_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
210 unsigned long addr, pci_addr;
215 if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
216 return PCIBIOS_DEVICE_NOT_FOUND;
218 mask = (size - 1) * 8;
219 shift = (where & 3) * 8;
220 addr = (pci_addr << 5) + mask + CIA_CONF;
221 *value = conf_read(addr, type1) >> (shift);
222 return PCIBIOS_SUCCESSFUL;
226 cia_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
229 unsigned long addr, pci_addr;
233 if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
234 return PCIBIOS_DEVICE_NOT_FOUND;
236 mask = (size - 1) * 8;
237 addr = (pci_addr << 5) + mask + CIA_CONF;
238 conf_write(addr, value << ((where & 3) * 8), type1);
239 return PCIBIOS_SUCCESSFUL;
242 struct pci_ops cia_pci_ops =
244 .read = cia_read_config,
245 .write = cia_write_config,
249 * CIA Pass 1 and PYXIS Pass 1 and 2 have a broken scatter-gather tlb.
250 * It cannot be invalidated. Rather than hard code the pass numbers,
251 * actually try the tbia to see if it works.
255 cia_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
258 *(vip)CIA_IOC_PCI_TBIA = 3; /* Flush all locked and unlocked. */
260 *(vip)CIA_IOC_PCI_TBIA;
264 * On PYXIS, even if the tbia works, we cannot use it. It effectively locks
265 * the chip (as well as direct write to the tag registers) if there is a
266 * SG DMA operation in progress. This is true at least for PYXIS rev. 1,
267 * so always use the method below.
270 * This is the method NT and NetBSD use.
272 * Allocate mappings, and put the chip into DMA loopback mode to read a
273 * garbage page. This works by causing TLB misses, causing old entries to
274 * be purged to make room for the new entries coming in for the garbage page.
277 #define CIA_BROKEN_TBIA_BASE 0x30000000
278 #define CIA_BROKEN_TBIA_SIZE 1024
280 /* Always called with interrupts disabled */
282 cia_pci_tbi_try2(struct pci_controller *hose,
283 dma_addr_t start, dma_addr_t end)
285 void __iomem *bus_addr;
288 /* Put the chip into PCI loopback mode. */
290 ctrl = *(vip)CIA_IOC_CIA_CTRL;
291 *(vip)CIA_IOC_CIA_CTRL = ctrl | CIA_CTRL_PCI_LOOP_EN;
293 *(vip)CIA_IOC_CIA_CTRL;
296 /* Read from PCI dense memory space at TBI_ADDR, skipping 32k on
297 each read. This forces SG TLB misses. NetBSD claims that the
298 TLB entries are not quite LRU, meaning that we need to read more
299 times than there are actual tags. The 2117x docs claim strict
300 round-robin. Oh well, we've come this far... */
301 /* Even better - as seen on the PYXIS rev 1 the TLB tags 0-3 can
302 be filled by the TLB misses *only once* after being invalidated
303 (by tbia or direct write). Next misses won't update them even
304 though the lock bits are cleared. Tags 4-7 are "quite LRU" though,
305 so use them and read at window 3 base exactly 4 times. Reading
306 more sometimes makes the chip crazy. -ink */
308 bus_addr = cia_ioremap(CIA_BROKEN_TBIA_BASE, 32768 * 4);
310 cia_readl(bus_addr + 0x00000);
311 cia_readl(bus_addr + 0x08000);
312 cia_readl(bus_addr + 0x10000);
313 cia_readl(bus_addr + 0x18000);
315 cia_iounmap(bus_addr);
317 /* Restore normal PCI operation. */
319 *(vip)CIA_IOC_CIA_CTRL = ctrl;
321 *(vip)CIA_IOC_CIA_CTRL;
326 cia_prepare_tbia_workaround(int window)
328 unsigned long *ppte, pte;
331 /* Use minimal 1K map. */
332 ppte = __alloc_bootmem(CIA_BROKEN_TBIA_SIZE, 32768, 0);
333 pte = (virt_to_phys(ppte) >> (PAGE_SHIFT - 1)) | 1;
335 for (i = 0; i < CIA_BROKEN_TBIA_SIZE / sizeof(unsigned long); ++i)
338 *(vip)CIA_IOC_PCI_Wn_BASE(window) = CIA_BROKEN_TBIA_BASE | 3;
339 *(vip)CIA_IOC_PCI_Wn_MASK(window)
340 = (CIA_BROKEN_TBIA_SIZE*1024 - 1) & 0xfff00000;
341 *(vip)CIA_IOC_PCI_Tn_BASE(window) = virt_to_phys(ppte) >> 2;
345 verify_tb_operation(void)
347 static int page[PAGE_SIZE/4]
348 __attribute__((aligned(PAGE_SIZE)))
351 struct pci_iommu_arena *arena = pci_isa_hose->sg_isa;
352 int ctrl, addr0, tag0, pte0, data0;
353 int temp, use_tbia_try2 = 0;
354 void __iomem *bus_addr;
356 /* pyxis -- tbia is broken */
357 if (pci_isa_hose->dense_io_base)
360 /* Put the chip into PCI loopback mode. */
362 ctrl = *(vip)CIA_IOC_CIA_CTRL;
363 *(vip)CIA_IOC_CIA_CTRL = ctrl | CIA_CTRL_PCI_LOOP_EN;
365 *(vip)CIA_IOC_CIA_CTRL;
368 /* Write a valid entry directly into the TLB registers. */
370 addr0 = arena->dma_base;
372 pte0 = (virt_to_phys(page) >> (PAGE_SHIFT - 1)) | 1;
374 *(vip)CIA_IOC_TB_TAGn(0) = tag0;
375 *(vip)CIA_IOC_TB_TAGn(1) = 0;
376 *(vip)CIA_IOC_TB_TAGn(2) = 0;
377 *(vip)CIA_IOC_TB_TAGn(3) = 0;
378 *(vip)CIA_IOC_TB_TAGn(4) = 0;
379 *(vip)CIA_IOC_TB_TAGn(5) = 0;
380 *(vip)CIA_IOC_TB_TAGn(6) = 0;
381 *(vip)CIA_IOC_TB_TAGn(7) = 0;
382 *(vip)CIA_IOC_TBn_PAGEm(0,0) = pte0;
383 *(vip)CIA_IOC_TBn_PAGEm(0,1) = 0;
384 *(vip)CIA_IOC_TBn_PAGEm(0,2) = 0;
385 *(vip)CIA_IOC_TBn_PAGEm(0,3) = 0;
388 /* Get a usable bus address */
389 bus_addr = cia_ioremap(addr0, 8*PAGE_SIZE);
391 /* First, verify we can read back what we've written. If
392 this fails, we can't be sure of any of the other testing
393 we're going to do, so bail. */
394 /* ??? Actually, we could do the work with machine checks.
395 By passing this register update test, we pretty much
396 guarantee that cia_pci_tbi_try1 works. If this test
397 fails, cia_pci_tbi_try2 might still work. */
399 temp = *(vip)CIA_IOC_TB_TAGn(0);
401 printk("pci: failed tb register update test "
402 "(tag0 %#x != %#x)\n", temp, tag0);
405 temp = *(vip)CIA_IOC_TB_TAGn(1);
407 printk("pci: failed tb register update test "
408 "(tag1 %#x != 0)\n", temp);
411 temp = *(vip)CIA_IOC_TBn_PAGEm(0,0);
413 printk("pci: failed tb register update test "
414 "(pte0 %#x != %#x)\n", temp, pte0);
417 printk("pci: passed tb register update test\n");
419 /* Second, verify we can actually do I/O through this entry. */
423 mcheck_expected(0) = 1;
426 temp = cia_readl(bus_addr);
428 mcheck_expected(0) = 0;
430 if (mcheck_taken(0)) {
431 printk("pci: failed sg loopback i/o read test (mcheck)\n");
435 printk("pci: failed sg loopback i/o read test "
436 "(%#x != %#x)\n", temp, data0);
439 printk("pci: passed sg loopback i/o read test\n");
441 /* Third, try to invalidate the TLB. */
443 if (! use_tbia_try2) {
444 cia_pci_tbi(arena->hose, 0, -1);
445 temp = *(vip)CIA_IOC_TB_TAGn(0);
448 printk("pci: failed tbia test; workaround available\n");
450 printk("pci: passed tbia test\n");
454 /* Fourth, verify the TLB snoops the EV5's caches when
459 arena->ptes[4] = pte0;
460 mcheck_expected(0) = 1;
463 temp = cia_readl(bus_addr + 4*PAGE_SIZE);
465 mcheck_expected(0) = 0;
467 if (mcheck_taken(0)) {
468 printk("pci: failed pte write cache snoop test (mcheck)\n");
472 printk("pci: failed pte write cache snoop test "
473 "(%#x != %#x)\n", temp, data0);
476 printk("pci: passed pte write cache snoop test\n");
478 /* Fifth, verify that a previously invalid PTE entry gets
479 filled from the page table. */
483 arena->ptes[5] = pte0;
484 mcheck_expected(0) = 1;
487 temp = cia_readl(bus_addr + 5*PAGE_SIZE);
489 mcheck_expected(0) = 0;
491 if (mcheck_taken(0)) {
492 printk("pci: failed valid tag invalid pte reload test "
493 "(mcheck; workaround available)\n");
494 /* Work around this bug by aligning new allocations
495 on 4 page boundaries. */
496 arena->align_entry = 4;
497 } else if (temp != data0) {
498 printk("pci: failed valid tag invalid pte reload test "
499 "(%#x != %#x)\n", temp, data0);
502 printk("pci: passed valid tag invalid pte reload test\n");
505 /* Sixth, verify machine checks are working. Test invalid
506 pte under the same valid tag as we used above. */
508 mcheck_expected(0) = 1;
511 temp = cia_readl(bus_addr + 6*PAGE_SIZE);
513 mcheck_expected(0) = 0;
515 printk("pci: %s pci machine check test\n",
516 mcheck_taken(0) ? "passed" : "failed");
518 /* Clean up after the tests. */
523 alpha_mv.mv_pci_tbi = cia_pci_tbi_try2;
525 /* Tags 0-3 must be disabled if we use this workaraund. */
527 *(vip)CIA_IOC_TB_TAGn(0) = 2;
528 *(vip)CIA_IOC_TB_TAGn(1) = 2;
529 *(vip)CIA_IOC_TB_TAGn(2) = 2;
530 *(vip)CIA_IOC_TB_TAGn(3) = 2;
532 printk("pci: tbia workaround enabled\n");
534 alpha_mv.mv_pci_tbi(arena->hose, 0, -1);
537 /* unmap the bus addr */
538 cia_iounmap(bus_addr);
540 /* Restore normal PCI operation. */
542 *(vip)CIA_IOC_CIA_CTRL = ctrl;
544 *(vip)CIA_IOC_CIA_CTRL;
549 printk("pci: disabling sg translation window\n");
550 *(vip)CIA_IOC_PCI_W0_BASE = 0;
551 *(vip)CIA_IOC_PCI_W1_BASE = 0;
552 pci_isa_hose->sg_isa = NULL;
553 alpha_mv.mv_pci_tbi = NULL;
557 #if defined(ALPHA_RESTORE_SRM_SETUP)
558 /* Save CIA configuration data as the console had it set up. */
561 unsigned int hae_mem;
563 unsigned int pci_dac_offset;
564 unsigned int err_mask;
565 unsigned int cia_ctrl;
566 unsigned int cia_cnfg;
572 } saved_config __attribute((common));
575 cia_save_srm_settings(int is_pyxis)
579 /* Save some important registers. */
580 saved_config.err_mask = *(vip)CIA_IOC_ERR_MASK;
581 saved_config.cia_ctrl = *(vip)CIA_IOC_CIA_CTRL;
582 saved_config.hae_mem = *(vip)CIA_IOC_HAE_MEM;
583 saved_config.hae_io = *(vip)CIA_IOC_HAE_IO;
584 saved_config.pci_dac_offset = *(vip)CIA_IOC_PCI_W_DAC;
587 saved_config.cia_cnfg = *(vip)CIA_IOC_CIA_CNFG;
589 saved_config.cia_cnfg = 0;
591 /* Save DMA windows configuration. */
592 for (i = 0; i < 4; i++) {
593 saved_config.window[i].w_base = *(vip)CIA_IOC_PCI_Wn_BASE(i);
594 saved_config.window[i].w_mask = *(vip)CIA_IOC_PCI_Wn_MASK(i);
595 saved_config.window[i].t_base = *(vip)CIA_IOC_PCI_Tn_BASE(i);
601 cia_restore_srm_settings(void)
605 for (i = 0; i < 4; i++) {
606 *(vip)CIA_IOC_PCI_Wn_BASE(i) = saved_config.window[i].w_base;
607 *(vip)CIA_IOC_PCI_Wn_MASK(i) = saved_config.window[i].w_mask;
608 *(vip)CIA_IOC_PCI_Tn_BASE(i) = saved_config.window[i].t_base;
611 *(vip)CIA_IOC_HAE_MEM = saved_config.hae_mem;
612 *(vip)CIA_IOC_HAE_IO = saved_config.hae_io;
613 *(vip)CIA_IOC_PCI_W_DAC = saved_config.pci_dac_offset;
614 *(vip)CIA_IOC_ERR_MASK = saved_config.err_mask;
615 *(vip)CIA_IOC_CIA_CTRL = saved_config.cia_ctrl;
617 if (saved_config.cia_cnfg) /* Must be pyxis. */
618 *(vip)CIA_IOC_CIA_CNFG = saved_config.cia_cnfg;
622 #else /* ALPHA_RESTORE_SRM_SETUP */
623 #define cia_save_srm_settings(p) do {} while (0)
624 #define cia_restore_srm_settings() do {} while (0)
625 #endif /* ALPHA_RESTORE_SRM_SETUP */
629 do_init_arch(int is_pyxis)
631 struct pci_controller *hose;
632 int temp, cia_rev, tbia_window;
634 cia_rev = *(vip)CIA_IOC_CIA_REV & CIA_REV_MASK;
635 printk("pci: cia revision %d%s\n",
636 cia_rev, is_pyxis ? " (pyxis)" : "");
639 cia_save_srm_settings(is_pyxis);
641 /* Set up error reporting. */
642 temp = *(vip)CIA_IOC_ERR_MASK;
643 temp &= ~(CIA_ERR_CPU_PE | CIA_ERR_MEM_NEM | CIA_ERR_PA_PTE_INV
644 | CIA_ERR_RCVD_MAS_ABT | CIA_ERR_RCVD_TAR_ABT);
645 *(vip)CIA_IOC_ERR_MASK = temp;
647 /* Clear all currently pending errors. */
648 temp = *(vip)CIA_IOC_CIA_ERR;
649 *(vip)CIA_IOC_CIA_ERR = temp;
651 /* Turn on mchecks. */
652 temp = *(vip)CIA_IOC_CIA_CTRL;
653 temp |= CIA_CTRL_FILL_ERR_EN | CIA_CTRL_MCHK_ERR_EN;
654 *(vip)CIA_IOC_CIA_CTRL = temp;
656 /* Clear the CFG register, which gets used for PCI config space
657 accesses. That is the way we want to use it, and we do not
658 want to depend on what ARC or SRM might have left behind. */
659 *(vip)CIA_IOC_CFG = 0;
662 *(vip)CIA_IOC_HAE_MEM = 0;
663 *(vip)CIA_IOC_HAE_IO = 0;
665 /* For PYXIS, we always use BWX bus and i/o accesses. To that end,
666 make sure they're enabled on the controller. At the same time,
667 enable the monster window. */
669 temp = *(vip)CIA_IOC_CIA_CNFG;
670 temp |= CIA_CNFG_IOA_BWEN | CIA_CNFG_PCI_MWEN;
671 *(vip)CIA_IOC_CIA_CNFG = temp;
674 /* Synchronize with all previous changes. */
676 *(vip)CIA_IOC_CIA_REV;
679 * Create our single hose.
682 pci_isa_hose = hose = alloc_pci_controller();
683 hose->io_space = &ioport_resource;
684 hose->mem_space = &iomem_resource;
688 struct resource *hae_mem = alloc_resource();
689 hose->mem_space = hae_mem;
692 hae_mem->end = CIA_MEM_R1_MASK;
693 hae_mem->name = pci_hae0_name;
694 hae_mem->flags = IORESOURCE_MEM;
696 if (request_resource(&iomem_resource, hae_mem) < 0)
697 printk(KERN_ERR "Failed to request HAE_MEM\n");
699 hose->sparse_mem_base = CIA_SPARSE_MEM - IDENT_ADDR;
700 hose->dense_mem_base = CIA_DENSE_MEM - IDENT_ADDR;
701 hose->sparse_io_base = CIA_IO - IDENT_ADDR;
702 hose->dense_io_base = 0;
704 hose->sparse_mem_base = 0;
705 hose->dense_mem_base = CIA_BW_MEM - IDENT_ADDR;
706 hose->sparse_io_base = 0;
707 hose->dense_io_base = CIA_BW_IO - IDENT_ADDR;
711 * Set up the PCI to main memory translation windows.
713 * Window 0 is S/G 8MB at 8MB (for isa)
714 * Window 1 is S/G 1MB at 768MB (for tbia) (unused for CIA rev 1)
715 * Window 2 is direct access 2GB at 2GB
716 * Window 3 is DAC access 4GB at 8GB (or S/G for tbia if CIA rev 1)
718 * ??? NetBSD hints that page tables must be aligned to 32K,
719 * possibly due to a hardware bug. This is over-aligned
720 * from the 8K alignment one would expect for an 8MB window.
721 * No description of what revisions affected.
725 hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 32768);
727 __direct_map_base = 0x80000000;
728 __direct_map_size = 0x80000000;
730 *(vip)CIA_IOC_PCI_W0_BASE = hose->sg_isa->dma_base | 3;
731 *(vip)CIA_IOC_PCI_W0_MASK = (hose->sg_isa->size - 1) & 0xfff00000;
732 *(vip)CIA_IOC_PCI_T0_BASE = virt_to_phys(hose->sg_isa->ptes) >> 2;
734 *(vip)CIA_IOC_PCI_W2_BASE = __direct_map_base | 1;
735 *(vip)CIA_IOC_PCI_W2_MASK = (__direct_map_size - 1) & 0xfff00000;
736 *(vip)CIA_IOC_PCI_T2_BASE = 0 >> 2;
738 /* On PYXIS we have the monster window, selected by bit 40, so
739 there is no need for window3 to be enabled.
741 On CIA, we don't have true arbitrary addressing -- bits <39:32>
742 are compared against W_DAC. We can, however, directly map 4GB,
743 which is better than before. However, due to assumptions made
744 elsewhere, we should not claim that we support DAC unless that
745 4GB covers all of physical memory.
747 On CIA rev 1, apparently W1 and W2 can't be used for SG.
748 At least, there are reports that it doesn't work for Alcor.
749 In that case, we have no choice but to use W3 for the TBIA
750 workaround, which means we can't use DAC at all. */
754 *(vip)CIA_IOC_PCI_W3_BASE = 0;
755 } else if (cia_rev == 1) {
756 *(vip)CIA_IOC_PCI_W1_BASE = 0;
758 } else if (max_low_pfn > (0x100000000UL >> PAGE_SHIFT)) {
759 *(vip)CIA_IOC_PCI_W3_BASE = 0;
761 *(vip)CIA_IOC_PCI_W3_BASE = 0x00000000 | 1 | 8;
762 *(vip)CIA_IOC_PCI_W3_MASK = 0xfff00000;
763 *(vip)CIA_IOC_PCI_T3_BASE = 0 >> 2;
765 alpha_mv.pci_dac_offset = 0x200000000UL;
766 *(vip)CIA_IOC_PCI_W_DAC = alpha_mv.pci_dac_offset >> 32;
769 /* Prepare workaround for apparently broken tbia. */
770 cia_prepare_tbia_workaround(tbia_window);
780 pyxis_init_arch(void)
782 /* On pyxis machines we can precisely calculate the
783 CPU clock frequency using pyxis real time counter.
784 It's especially useful for SX164 with broken RTC.
786 Both CPU and chipset are driven by the single 16.666M
787 or 16.667M crystal oscillator. PYXIS_RT_COUNT clock is
790 unsigned int cc0, cc1;
791 unsigned long pyxis_cc;
793 __asm__ __volatile__ ("rpcc %0" : "=r"(cc0));
794 pyxis_cc = *(vulp)PYXIS_RT_COUNT;
795 do { } while(*(vulp)PYXIS_RT_COUNT - pyxis_cc < 4096);
796 __asm__ __volatile__ ("rpcc %0" : "=r"(cc1));
798 hwrpb->cycle_freq = ((cc1 >> 11) * 100000000UL) / 3;
799 hwrpb_update_checksum(hwrpb);
805 cia_kill_arch(int mode)
808 cia_restore_srm_settings();
814 /* Must delay this from init_arch, as we need machine checks. */
815 verify_tb_operation();
820 cia_pci_clr_err(void)
824 jd = *(vip)CIA_IOC_CIA_ERR;
825 *(vip)CIA_IOC_CIA_ERR = jd;
827 *(vip)CIA_IOC_CIA_ERR; /* re-read to force write. */
830 #ifdef CONFIG_VERBOSE_MCHECK
832 cia_decode_pci_error(struct el_CIA_sysdata_mcheck *cia, const char *msg)
834 static const char * const pci_cmd_desc[16] = {
835 "Interrupt Acknowledge", "Special Cycle", "I/O Read",
836 "I/O Write", "Reserved 0x4", "Reserved 0x5", "Memory Read",
837 "Memory Write", "Reserved 0x8", "Reserved 0x9",
838 "Configuration Read", "Configuration Write",
839 "Memory Read Multiple", "Dual Address Cycle",
840 "Memory Read Line", "Memory Write and Invalidate"
843 if (cia->cia_err & (CIA_ERR_COR_ERR
846 | CIA_ERR_PA_PTE_INV)) {
847 static const char * const window_desc[6] = {
848 "No window active", "Window 0 hit", "Window 1 hit",
849 "Window 2 hit", "Window 3 hit", "Monster window hit"
854 unsigned long addr, tmp;
857 cmd = pci_cmd_desc[cia->pci_err0 & 0x7];
858 lock = (cia->pci_err0 >> 4) & 1;
859 dac = (cia->pci_err0 >> 5) & 1;
861 tmp = (cia->pci_err0 >> 8) & 0x1F;
863 window = window_desc[tmp];
865 addr = cia->pci_err1;
867 tmp = *(vip)CIA_IOC_PCI_W_DAC & 0xFFUL;
871 printk(KERN_CRIT "CIA machine check: %s\n", msg);
872 printk(KERN_CRIT " DMA command: %s\n", cmd);
873 printk(KERN_CRIT " PCI address: %#010lx\n", addr);
874 printk(KERN_CRIT " %s, Lock: %d, DAC: %d\n",
876 } else if (cia->cia_err & (CIA_ERR_PERR
877 | CIA_ERR_PCI_ADDR_PE
878 | CIA_ERR_RCVD_MAS_ABT
879 | CIA_ERR_RCVD_TAR_ABT
880 | CIA_ERR_IOA_TIMEOUT)) {
881 static const char * const master_st_desc[16] = {
882 "Idle", "Drive bus", "Address step cycle",
883 "Address cycle", "Data cycle", "Last read data cycle",
884 "Last write data cycle", "Read stop cycle",
885 "Write stop cycle", "Read turnaround cycle",
886 "Write turnaround cycle", "Reserved 0xB",
887 "Reserved 0xC", "Reserved 0xD", "Reserved 0xE",
890 static const char * const target_st_desc[16] = {
891 "Idle", "Busy", "Read data cycle", "Write data cycle",
892 "Read stop cycle", "Write stop cycle",
893 "Read turnaround cycle", "Write turnaround cycle",
894 "Read wait cycle", "Write wait cycle",
895 "Reserved 0xA", "Reserved 0xB", "Reserved 0xC",
896 "Reserved 0xD", "Reserved 0xE", "Unknown state"
900 const char *master, *target;
901 unsigned long addr, tmp;
904 master = master_st_desc[(cia->pci_err0 >> 16) & 0xF];
905 target = target_st_desc[(cia->pci_err0 >> 20) & 0xF];
906 cmd = pci_cmd_desc[(cia->pci_err0 >> 24) & 0xF];
907 dac = (cia->pci_err0 >> 28) & 1;
909 addr = cia->pci_err2;
911 tmp = *(volatile int *)CIA_IOC_PCI_W_DAC & 0xFFUL;
915 printk(KERN_CRIT "CIA machine check: %s\n", msg);
916 printk(KERN_CRIT " PCI command: %s\n", cmd);
917 printk(KERN_CRIT " Master state: %s, Target state: %s\n",
919 printk(KERN_CRIT " PCI address: %#010lx, DAC: %d\n",
922 printk(KERN_CRIT "CIA machine check: %s\n", msg);
923 printk(KERN_CRIT " Unknown PCI error\n");
924 printk(KERN_CRIT " PCI_ERR0 = %#08lx", cia->pci_err0);
925 printk(KERN_CRIT " PCI_ERR1 = %#08lx", cia->pci_err1);
926 printk(KERN_CRIT " PCI_ERR2 = %#08lx", cia->pci_err2);
931 cia_decode_mem_error(struct el_CIA_sysdata_mcheck *cia, const char *msg)
933 unsigned long mem_port_addr;
934 unsigned long mem_port_mask;
935 const char *mem_port_cmd;
936 const char *seq_state;
937 const char *set_select;
940 /* If this is a DMA command, also decode the PCI bits. */
941 if ((cia->mem_err1 >> 20) & 1)
942 cia_decode_pci_error(cia, msg);
944 printk(KERN_CRIT "CIA machine check: %s\n", msg);
946 mem_port_addr = cia->mem_err0 & 0xfffffff0;
947 mem_port_addr |= (cia->mem_err1 & 0x83UL) << 32;
949 mem_port_mask = (cia->mem_err1 >> 12) & 0xF;
951 tmp = (cia->mem_err1 >> 8) & 0xF;
952 tmp |= ((cia->mem_err1 >> 20) & 1) << 4;
953 if ((tmp & 0x1E) == 0x06)
954 mem_port_cmd = "WRITE BLOCK or WRITE BLOCK LOCK";
955 else if ((tmp & 0x1C) == 0x08)
956 mem_port_cmd = "READ MISS or READ MISS MODIFY";
957 else if (tmp == 0x1C)
958 mem_port_cmd = "BC VICTIM";
959 else if ((tmp & 0x1E) == 0x0E)
960 mem_port_cmd = "READ MISS MODIFY";
961 else if ((tmp & 0x1C) == 0x18)
962 mem_port_cmd = "DMA READ or DMA READ MODIFY";
963 else if ((tmp & 0x1E) == 0x12)
964 mem_port_cmd = "DMA WRITE";
966 mem_port_cmd = "Unknown";
968 tmp = (cia->mem_err1 >> 16) & 0xF;
974 seq_state = "DMA READ or DMA WRITE";
977 seq_state = "READ MISS (or READ MISS MODIFY) with victim";
979 case 0x4: case 0x5: case 0x6:
980 seq_state = "READ MISS (or READ MISS MODIFY) with no victim";
982 case 0x8: case 0x9: case 0xB:
983 seq_state = "Refresh";
986 seq_state = "Idle, waiting for DMA pending read";
989 seq_state = "Idle, ras precharge";
992 seq_state = "Unknown";
996 tmp = (cia->mem_err1 >> 24) & 0x1F;
998 case 0x00: set_select = "Set 0 selected"; break;
999 case 0x01: set_select = "Set 1 selected"; break;
1000 case 0x02: set_select = "Set 2 selected"; break;
1001 case 0x03: set_select = "Set 3 selected"; break;
1002 case 0x04: set_select = "Set 4 selected"; break;
1003 case 0x05: set_select = "Set 5 selected"; break;
1004 case 0x06: set_select = "Set 6 selected"; break;
1005 case 0x07: set_select = "Set 7 selected"; break;
1006 case 0x08: set_select = "Set 8 selected"; break;
1007 case 0x09: set_select = "Set 9 selected"; break;
1008 case 0x0A: set_select = "Set A selected"; break;
1009 case 0x0B: set_select = "Set B selected"; break;
1010 case 0x0C: set_select = "Set C selected"; break;
1011 case 0x0D: set_select = "Set D selected"; break;
1012 case 0x0E: set_select = "Set E selected"; break;
1013 case 0x0F: set_select = "Set F selected"; break;
1014 case 0x10: set_select = "No set selected"; break;
1015 case 0x1F: set_select = "Refresh cycle"; break;
1016 default: set_select = "Unknown"; break;
1019 printk(KERN_CRIT " Memory port command: %s\n", mem_port_cmd);
1020 printk(KERN_CRIT " Memory port address: %#010lx, mask: %#lx\n",
1021 mem_port_addr, mem_port_mask);
1022 printk(KERN_CRIT " Memory sequencer state: %s\n", seq_state);
1023 printk(KERN_CRIT " Memory set: %s\n", set_select);
1027 cia_decode_ecc_error(struct el_CIA_sysdata_mcheck *cia, const char *msg)
1033 cia_decode_mem_error(cia, msg);
1035 syn = cia->cia_syn & 0xff;
1036 if (syn == (syn & -syn)) {
1037 fmt = KERN_CRIT " ECC syndrome %#x -- check bit %d\n";
1040 static unsigned char const data_bit[64] = {
1041 0xCE, 0xCB, 0xD3, 0xD5,
1042 0xD6, 0xD9, 0xDA, 0xDC,
1043 0x23, 0x25, 0x26, 0x29,
1044 0x2A, 0x2C, 0x31, 0x34,
1045 0x0E, 0x0B, 0x13, 0x15,
1046 0x16, 0x19, 0x1A, 0x1C,
1047 0xE3, 0xE5, 0xE6, 0xE9,
1048 0xEA, 0xEC, 0xF1, 0xF4,
1049 0x4F, 0x4A, 0x52, 0x54,
1050 0x57, 0x58, 0x5B, 0x5D,
1051 0xA2, 0xA4, 0xA7, 0xA8,
1052 0xAB, 0xAD, 0xB0, 0xB5,
1053 0x8F, 0x8A, 0x92, 0x94,
1054 0x97, 0x98, 0x9B, 0x9D,
1055 0x62, 0x64, 0x67, 0x68,
1056 0x6B, 0x6D, 0x70, 0x75
1059 for (i = 0; i < 64; ++i)
1060 if (data_bit[i] == syn)
1064 fmt = KERN_CRIT " ECC syndrome %#x -- data bit %d\n";
1066 fmt = KERN_CRIT " ECC syndrome %#x -- unknown bit\n";
1069 printk (fmt, syn, i);
1073 cia_decode_parity_error(struct el_CIA_sysdata_mcheck *cia)
1075 static const char * const cmd_desc[16] = {
1076 "NOP", "LOCK", "FETCH", "FETCH_M", "MEMORY BARRIER",
1077 "SET DIRTY", "WRITE BLOCK", "WRITE BLOCK LOCK",
1078 "READ MISS0", "READ MISS1", "READ MISS MOD0",
1079 "READ MISS MOD1", "BCACHE VICTIM", "Spare",
1080 "READ MISS MOD STC0", "READ MISS MOD STC1"
1088 addr = cia->cpu_err0 & 0xfffffff0;
1089 addr |= (cia->cpu_err1 & 0x83UL) << 32;
1090 cmd = cmd_desc[(cia->cpu_err1 >> 8) & 0xF];
1091 mask = (cia->cpu_err1 >> 12) & 0xF;
1092 par = (cia->cpu_err1 >> 21) & 1;
1094 printk(KERN_CRIT "CIA machine check: System bus parity error\n");
1095 printk(KERN_CRIT " Command: %s, Parity bit: %d\n", cmd, par);
1096 printk(KERN_CRIT " Address: %#010lx, Mask: %#lx\n", addr, mask);
1098 #endif /* CONFIG_VERBOSE_MCHECK */
1102 cia_decode_mchk(unsigned long la_ptr)
1104 struct el_common *com;
1105 struct el_CIA_sysdata_mcheck *cia;
1107 com = (void *)la_ptr;
1108 cia = (void *)(la_ptr + com->sys_offset);
1110 if ((cia->cia_err & CIA_ERR_VALID) == 0)
1113 #ifdef CONFIG_VERBOSE_MCHECK
1114 if (!alpha_verbose_mcheck)
1117 switch (ffs(cia->cia_err & 0xfff) - 1) {
1118 case 0: /* CIA_ERR_COR_ERR */
1119 cia_decode_ecc_error(cia, "Corrected ECC error");
1121 case 1: /* CIA_ERR_UN_COR_ERR */
1122 cia_decode_ecc_error(cia, "Uncorrected ECC error");
1124 case 2: /* CIA_ERR_CPU_PE */
1125 cia_decode_parity_error(cia);
1127 case 3: /* CIA_ERR_MEM_NEM */
1128 cia_decode_mem_error(cia, "Access to nonexistent memory");
1130 case 4: /* CIA_ERR_PCI_SERR */
1131 cia_decode_pci_error(cia, "PCI bus system error");
1133 case 5: /* CIA_ERR_PERR */
1134 cia_decode_pci_error(cia, "PCI data parity error");
1136 case 6: /* CIA_ERR_PCI_ADDR_PE */
1137 cia_decode_pci_error(cia, "PCI address parity error");
1139 case 7: /* CIA_ERR_RCVD_MAS_ABT */
1140 cia_decode_pci_error(cia, "PCI master abort");
1142 case 8: /* CIA_ERR_RCVD_TAR_ABT */
1143 cia_decode_pci_error(cia, "PCI target abort");
1145 case 9: /* CIA_ERR_PA_PTE_INV */
1146 cia_decode_pci_error(cia, "PCI invalid PTE");
1148 case 10: /* CIA_ERR_FROM_WRT_ERR */
1149 cia_decode_mem_error(cia, "Write to flash ROM attempted");
1151 case 11: /* CIA_ERR_IOA_TIMEOUT */
1152 cia_decode_pci_error(cia, "I/O timeout");
1156 if (cia->cia_err & CIA_ERR_LOST_CORR_ERR)
1157 printk(KERN_CRIT "CIA lost machine check: "
1158 "Correctable ECC error\n");
1159 if (cia->cia_err & CIA_ERR_LOST_UN_CORR_ERR)
1160 printk(KERN_CRIT "CIA lost machine check: "
1161 "Uncorrectable ECC error\n");
1162 if (cia->cia_err & CIA_ERR_LOST_CPU_PE)
1163 printk(KERN_CRIT "CIA lost machine check: "
1164 "System bus parity error\n");
1165 if (cia->cia_err & CIA_ERR_LOST_MEM_NEM)
1166 printk(KERN_CRIT "CIA lost machine check: "
1167 "Access to nonexistent memory\n");
1168 if (cia->cia_err & CIA_ERR_LOST_PERR)
1169 printk(KERN_CRIT "CIA lost machine check: "
1170 "PCI data parity error\n");
1171 if (cia->cia_err & CIA_ERR_LOST_PCI_ADDR_PE)
1172 printk(KERN_CRIT "CIA lost machine check: "
1173 "PCI address parity error\n");
1174 if (cia->cia_err & CIA_ERR_LOST_RCVD_MAS_ABT)
1175 printk(KERN_CRIT "CIA lost machine check: "
1176 "PCI master abort\n");
1177 if (cia->cia_err & CIA_ERR_LOST_RCVD_TAR_ABT)
1178 printk(KERN_CRIT "CIA lost machine check: "
1179 "PCI target abort\n");
1180 if (cia->cia_err & CIA_ERR_LOST_PA_PTE_INV)
1181 printk(KERN_CRIT "CIA lost machine check: "
1182 "PCI invalid PTE\n");
1183 if (cia->cia_err & CIA_ERR_LOST_FROM_WRT_ERR)
1184 printk(KERN_CRIT "CIA lost machine check: "
1185 "Write to flash ROM attempted\n");
1186 if (cia->cia_err & CIA_ERR_LOST_IOA_TIMEOUT)
1187 printk(KERN_CRIT "CIA lost machine check: "
1189 #endif /* CONFIG_VERBOSE_MCHECK */
1195 cia_machine_check(unsigned long vector, unsigned long la_ptr,
1196 struct pt_regs * regs)
1200 /* Clear the error before any reporting. */
1205 wrmces(rdmces()); /* reset machine check pending flag. */
1208 expected = mcheck_expected(0);
1209 if (!expected && vector == 0x660)
1210 expected = cia_decode_mchk(la_ptr);
1211 process_mcheck_info(vector, la_ptr, regs, "CIA", expected);