Merge rsync://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
[linux-2.6] / arch / arm / mach-ixp4xx / common.c
1 /*
2  * arch/arm/mach-ixp4xx/common.c
3  *
4  * Generic code shared across all IXP4XX platforms
5  *
6  * Maintainer: Deepak Saxena <dsaxena@plexity.net>
7  *
8  * Copyright 2002 (c) Intel Corporation
9  * Copyright 2003-2004 (c) MontaVista, Software, Inc. 
10  * 
11  * This file is licensed under  the terms of the GNU General Public 
12  * License version 2. This program is licensed "as is" without any 
13  * warranty of any kind, whether express or implied.
14  */
15
16 #include <linux/kernel.h>
17 #include <linux/mm.h>
18 #include <linux/init.h>
19 #include <linux/serial.h>
20 #include <linux/sched.h>
21 #include <linux/tty.h>
22 #include <linux/platform_device.h>
23 #include <linux/serial_core.h>
24 #include <linux/bootmem.h>
25 #include <linux/interrupt.h>
26 #include <linux/bitops.h>
27 #include <linux/time.h>
28 #include <linux/timex.h>
29
30 #include <asm/hardware.h>
31 #include <asm/uaccess.h>
32 #include <asm/io.h>
33 #include <asm/pgtable.h>
34 #include <asm/page.h>
35 #include <asm/irq.h>
36
37 #include <asm/mach/map.h>
38 #include <asm/mach/irq.h>
39 #include <asm/mach/time.h>
40
41 /*************************************************************************
42  * IXP4xx chipset I/O mapping
43  *************************************************************************/
44 static struct map_desc ixp4xx_io_desc[] __initdata = {
45         {       /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
46                 .virtual        = IXP4XX_PERIPHERAL_BASE_VIRT,
47                 .pfn            = __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
48                 .length         = IXP4XX_PERIPHERAL_REGION_SIZE,
49                 .type           = MT_DEVICE
50         }, {    /* Expansion Bus Config Registers */
51                 .virtual        = IXP4XX_EXP_CFG_BASE_VIRT,
52                 .pfn            = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
53                 .length         = IXP4XX_EXP_CFG_REGION_SIZE,
54                 .type           = MT_DEVICE
55         }, {    /* PCI Registers */
56                 .virtual        = IXP4XX_PCI_CFG_BASE_VIRT,
57                 .pfn            = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
58                 .length         = IXP4XX_PCI_CFG_REGION_SIZE,
59                 .type           = MT_DEVICE
60         },
61 #ifdef CONFIG_DEBUG_LL
62         {       /* Debug UART mapping */
63                 .virtual        = IXP4XX_DEBUG_UART_BASE_VIRT,
64                 .pfn            = __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS),
65                 .length         = IXP4XX_DEBUG_UART_REGION_SIZE,
66                 .type           = MT_DEVICE
67         }
68 #endif
69 };
70
71 void __init ixp4xx_map_io(void)
72 {
73         iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
74 }
75
76
77 /*************************************************************************
78  * IXP4xx chipset IRQ handling
79  *
80  * TODO: GPIO IRQs should be marked invalid until the user of the IRQ
81  *       (be it PCI or something else) configures that GPIO line
82  *       as an IRQ.
83  **************************************************************************/
84 enum ixp4xx_irq_type {
85         IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
86 };
87
88 static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type);
89
90 /*
91  * IRQ -> GPIO mapping table
92  */
93 static signed char irq2gpio[32] = {
94         -1, -1, -1, -1, -1, -1,  0,  1,
95         -1, -1, -1, -1, -1, -1, -1, -1,
96         -1, -1, -1,  2,  3,  4,  5,  6,
97          7,  8,  9, 10, 11, 12, -1, -1,
98 };
99
100 static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
101 {
102         int line = irq2gpio[irq];
103         u32 int_style;
104         enum ixp4xx_irq_type irq_type;
105         volatile u32 *int_reg;
106
107         /*
108          * Only for GPIO IRQs
109          */
110         if (line < 0)
111                 return -EINVAL;
112
113         switch (type){
114         case IRQT_BOTHEDGE:
115                 int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
116                 irq_type = IXP4XX_IRQ_EDGE;
117                 break;
118         case IRQT_RISING:
119                 int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
120                 irq_type = IXP4XX_IRQ_EDGE;
121                 break;
122         case IRQT_FALLING:
123                 int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
124                 irq_type = IXP4XX_IRQ_EDGE;
125                 break;
126         case IRQT_HIGH:
127                 int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
128                 irq_type = IXP4XX_IRQ_LEVEL;
129                 break;
130         case IRQT_LOW:
131                 int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
132                 irq_type = IXP4XX_IRQ_LEVEL;
133                 break;
134         default:
135                 return -EINVAL;
136         }
137         ixp4xx_config_irq(irq, irq_type);
138
139         if (line >= 8) {        /* pins 8-15 */
140                 line -= 8;
141                 int_reg = IXP4XX_GPIO_GPIT2R;
142         } else {                /* pins 0-7 */
143                 int_reg = IXP4XX_GPIO_GPIT1R;
144         }
145
146         /* Clear the style for the appropriate pin */
147         *int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR <<
148                         (line * IXP4XX_GPIO_STYLE_SIZE));
149
150         *IXP4XX_GPIO_GPISR = (1 << line);
151
152         /* Set the new style */
153         *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
154
155         /* Configure the line as an input */
156         gpio_line_config(line, IXP4XX_GPIO_IN);
157
158         return 0;
159 }
160
161 static void ixp4xx_irq_mask(unsigned int irq)
162 {
163         if (cpu_is_ixp46x() && irq >= 32)
164                 *IXP4XX_ICMR2 &= ~(1 << (irq - 32));
165         else
166                 *IXP4XX_ICMR &= ~(1 << irq);
167 }
168
169 static void ixp4xx_irq_unmask(unsigned int irq)
170 {
171         if (cpu_is_ixp46x() && irq >= 32)
172                 *IXP4XX_ICMR2 |= (1 << (irq - 32));
173         else
174                 *IXP4XX_ICMR |= (1 << irq);
175 }
176
177 static void ixp4xx_irq_ack(unsigned int irq)
178 {
179         int line = (irq < 32) ? irq2gpio[irq] : -1;
180
181         if (line >= 0)
182                 *IXP4XX_GPIO_GPISR = (1 << line);
183 }
184
185 /*
186  * Level triggered interrupts on GPIO lines can only be cleared when the
187  * interrupt condition disappears.
188  */
189 static void ixp4xx_irq_level_unmask(unsigned int irq)
190 {
191         ixp4xx_irq_ack(irq);
192         ixp4xx_irq_unmask(irq);
193 }
194
195 static struct irqchip ixp4xx_irq_level_chip = {
196         .ack            = ixp4xx_irq_mask,
197         .mask           = ixp4xx_irq_mask,
198         .unmask         = ixp4xx_irq_level_unmask,
199         .set_type       = ixp4xx_set_irq_type,
200 };
201
202 static struct irqchip ixp4xx_irq_edge_chip = {
203         .ack            = ixp4xx_irq_ack,
204         .mask           = ixp4xx_irq_mask,
205         .unmask         = ixp4xx_irq_unmask,
206         .set_type       = ixp4xx_set_irq_type,
207 };
208
209 static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type)
210 {
211         switch (type) {
212         case IXP4XX_IRQ_LEVEL:
213                 set_irq_chip(irq, &ixp4xx_irq_level_chip);
214                 set_irq_handler(irq, do_level_IRQ);
215                 break;
216         case IXP4XX_IRQ_EDGE:
217                 set_irq_chip(irq, &ixp4xx_irq_edge_chip);
218                 set_irq_handler(irq, do_edge_IRQ);
219                 break;
220         }
221         set_irq_flags(irq, IRQF_VALID);
222 }
223
224 void __init ixp4xx_init_irq(void)
225 {
226         int i = 0;
227
228         /* Route all sources to IRQ instead of FIQ */
229         *IXP4XX_ICLR = 0x0;
230
231         /* Disable all interrupt */
232         *IXP4XX_ICMR = 0x0; 
233
234         if (cpu_is_ixp46x()) {
235                 /* Route upper 32 sources to IRQ instead of FIQ */
236                 *IXP4XX_ICLR2 = 0x00;
237
238                 /* Disable upper 32 interrupts */
239                 *IXP4XX_ICMR2 = 0x00;
240         }
241
242         /* Default to all level triggered */
243         for(i = 0; i < NR_IRQS; i++)
244                 ixp4xx_config_irq(i, IXP4XX_IRQ_LEVEL);
245 }
246
247
248 /*************************************************************************
249  * IXP4xx timer tick
250  * We use OS timer1 on the CPU for the timer tick and the timestamp 
251  * counter as a source of real clock ticks to account for missed jiffies.
252  *************************************************************************/
253
254 static unsigned volatile last_jiffy_time;
255
256 #define CLOCK_TICKS_PER_USEC    ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
257
258 /* IRQs are disabled before entering here from do_gettimeofday() */
259 static unsigned long ixp4xx_gettimeoffset(void)
260 {
261         u32 elapsed;
262
263         elapsed = *IXP4XX_OSTS - last_jiffy_time;
264
265         return elapsed / CLOCK_TICKS_PER_USEC;
266 }
267
268 static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
269 {
270         write_seqlock(&xtime_lock);
271
272         /* Clear Pending Interrupt by writing '1' to it */
273         *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
274
275         /*
276          * Catch up with the real idea of time
277          */
278         while ((signed long)(*IXP4XX_OSTS - last_jiffy_time) >= LATCH) {
279                 timer_tick(regs);
280                 last_jiffy_time += LATCH;
281         }
282
283         write_sequnlock(&xtime_lock);
284
285         return IRQ_HANDLED;
286 }
287
288 static struct irqaction ixp4xx_timer_irq = {
289         .name           = "IXP4xx Timer Tick",
290         .flags          = IRQF_DISABLED | IRQF_TIMER,
291         .handler        = ixp4xx_timer_interrupt,
292 };
293
294 static void __init ixp4xx_timer_init(void)
295 {
296         /* Clear Pending Interrupt by writing '1' to it */
297         *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
298
299         /* Setup the Timer counter value */
300         *IXP4XX_OSRT1 = (LATCH & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
301
302         /* Reset time-stamp counter */
303         *IXP4XX_OSTS = 0;
304         last_jiffy_time = 0;
305
306         /* Connect the interrupt handler and enable the interrupt */
307         setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
308 }
309
310 struct sys_timer ixp4xx_timer = {
311         .init           = ixp4xx_timer_init,
312         .offset         = ixp4xx_gettimeoffset,
313 };
314
315 static struct resource ixp46x_i2c_resources[] = {
316         [0] = {
317                 .start  = 0xc8011000,
318                 .end    = 0xc801101c,
319                 .flags  = IORESOURCE_MEM,
320         },
321         [1] = {
322                 .start  = IRQ_IXP4XX_I2C,
323                 .end    = IRQ_IXP4XX_I2C,
324                 .flags  = IORESOURCE_IRQ
325         }
326 };
327
328 /*
329  * I2C controller. The IXP46x uses the same block as the IOP3xx, so
330  * we just use the same device name.
331  */
332 static struct platform_device ixp46x_i2c_controller = {
333         .name           = "IOP3xx-I2C",
334         .id             = 0,
335         .num_resources  = 2,
336         .resource       = ixp46x_i2c_resources
337 };
338
339 static struct platform_device *ixp46x_devices[] __initdata = {
340         &ixp46x_i2c_controller
341 };
342
343 unsigned long ixp4xx_exp_bus_size;
344 EXPORT_SYMBOL(ixp4xx_exp_bus_size);
345
346 void __init ixp4xx_sys_init(void)
347 {
348         ixp4xx_exp_bus_size = SZ_16M;
349
350         if (cpu_is_ixp46x()) {
351                 int region;
352
353                 platform_add_devices(ixp46x_devices,
354                                 ARRAY_SIZE(ixp46x_devices));
355
356                 for (region = 0; region < 7; region++) {
357                         if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) {
358                                 ixp4xx_exp_bus_size = SZ_32M;
359                                 break;
360                         }
361                 }
362         }
363
364         printk("IXP4xx: Using %luMiB expansion bus window size\n",
365                         ixp4xx_exp_bus_size >> 20);
366 }
367