Merge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6
[linux-2.6] / drivers / input / serio / hp_sdc_mlc.c
1 /*
2  * Access to HP-HIL MLC through HP System Device Controller.
3  *
4  * Copyright (c) 2001 Brian S. Julin
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions, and the following disclaimer,
12  *    without modification.
13  * 2. The name of the author may not be used to endorse or promote products
14  *    derived from this software without specific prior written permission.
15  *
16  * Alternatively, this software may be distributed under the terms of the
17  * GNU General Public License ("GPL").
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
23  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28  *
29  * References:
30  * HP-HIL Technical Reference Manual.  Hewlett Packard Product No. 45918A
31  * System Device Controller Microprocessor Firmware Theory of Operation
32  *      for Part Number 1820-4784 Revision B.  Dwg No. A-1820-4784-2
33  *
34  */
35
36 #include <linux/hil_mlc.h>
37 #include <linux/hp_sdc.h>
38 #include <linux/errno.h>
39 #include <linux/kernel.h>
40 #include <linux/module.h>
41 #include <linux/init.h>
42 #include <linux/string.h>
43 #include <asm/semaphore.h>
44
45 #define PREFIX "HP SDC MLC: "
46
47 static hil_mlc hp_sdc_mlc;
48
49 MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>");
50 MODULE_DESCRIPTION("Glue for onboard HIL MLC in HP-PARISC machines");
51 MODULE_LICENSE("Dual BSD/GPL");
52
53 struct hp_sdc_mlc_priv_s {
54         int emtestmode;
55         hp_sdc_transaction trans;
56         u8 tseq[16];
57         int got5x;
58 } hp_sdc_mlc_priv;
59
60 /************************* Interrupt context ******************************/
61 static void hp_sdc_mlc_isr (int irq, void *dev_id,
62                             uint8_t status, uint8_t data)
63 {
64         int idx;
65         hil_mlc *mlc = &hp_sdc_mlc;
66
67         write_lock(&mlc->lock);
68         if (mlc->icount < 0) {
69                 printk(KERN_WARNING PREFIX "HIL Overflow!\n");
70                 up(&mlc->isem);
71                 goto out;
72         }
73         idx = 15 - mlc->icount;
74         if ((status & HP_SDC_STATUS_IRQMASK) == HP_SDC_STATUS_HILDATA) {
75                 mlc->ipacket[idx] |= data | HIL_ERR_INT;
76                 mlc->icount--;
77                 if (hp_sdc_mlc_priv.got5x || !idx)
78                         goto check;
79                 if ((mlc->ipacket[idx - 1] & HIL_PKT_ADDR_MASK) !=
80                     (mlc->ipacket[idx] & HIL_PKT_ADDR_MASK)) {
81                         mlc->ipacket[idx] &= ~HIL_PKT_ADDR_MASK;
82                         mlc->ipacket[idx] |= (mlc->ipacket[idx - 1]
83                                                 & HIL_PKT_ADDR_MASK);
84                 }
85                 goto check;
86         }
87         /* We know status is 5X */
88         if (data & HP_SDC_HIL_ISERR)
89                 goto err;
90         mlc->ipacket[idx] =
91                 (data & HP_SDC_HIL_R1MASK) << HIL_PKT_ADDR_SHIFT;
92         hp_sdc_mlc_priv.got5x = 1;
93         goto out;
94
95  check:
96         hp_sdc_mlc_priv.got5x = 0;
97         if (mlc->imatch == 0)
98                 goto done;
99         if ((mlc->imatch == (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_POL))
100             && (mlc->ipacket[idx] == (mlc->imatch | idx)))
101                 goto done;
102         if (mlc->ipacket[idx] == mlc->imatch)
103                 goto done;
104         goto out;
105
106  err:
107         printk(KERN_DEBUG PREFIX "err code %x\n", data);
108
109         switch (data) {
110         case HP_SDC_HIL_RC_DONE:
111                 printk(KERN_WARNING PREFIX "Bastard SDC reconfigured loop!\n");
112                 break;
113
114         case HP_SDC_HIL_ERR:
115                 mlc->ipacket[idx] |= HIL_ERR_INT | HIL_ERR_PERR |
116                                         HIL_ERR_FERR | HIL_ERR_FOF;
117                 break;
118
119         case HP_SDC_HIL_TO:
120                 mlc->ipacket[idx] |= HIL_ERR_INT | HIL_ERR_LERR;
121                 break;
122
123         case HP_SDC_HIL_RC:
124                 printk(KERN_WARNING PREFIX "Bastard SDC decided to reconfigure loop!\n");
125                 break;
126
127         default:
128                 printk(KERN_WARNING PREFIX "Unkown HIL Error status (%x)!\n", data);
129                 break;
130         }
131
132         /* No more data will be coming due to an error. */
133  done:
134         tasklet_schedule(mlc->tasklet);
135         up(&mlc->isem);
136  out:
137         write_unlock(&mlc->lock);
138 }
139
140
141 /******************** Tasklet or userspace context functions ****************/
142
143 static int hp_sdc_mlc_in(hil_mlc *mlc, suseconds_t timeout)
144 {
145         struct hp_sdc_mlc_priv_s *priv;
146         int rc = 2;
147
148         priv = mlc->priv;
149
150         /* Try to down the semaphore */
151         if (down_trylock(&mlc->isem)) {
152                 struct timeval tv;
153                 if (priv->emtestmode) {
154                         mlc->ipacket[0] =
155                                 HIL_ERR_INT | (mlc->opacket &
156                                                (HIL_PKT_CMD |
157                                                 HIL_PKT_ADDR_MASK |
158                                                 HIL_PKT_DATA_MASK));
159                         mlc->icount = 14;
160                         /* printk(KERN_DEBUG PREFIX ">[%x]\n", mlc->ipacket[0]); */
161                         goto wasup;
162                 }
163                 do_gettimeofday(&tv);
164                 tv.tv_usec += USEC_PER_SEC * (tv.tv_sec - mlc->instart.tv_sec);
165                 if (tv.tv_usec - mlc->instart.tv_usec > mlc->intimeout) {
166                         /*      printk("!%i %i",
167                                 tv.tv_usec - mlc->instart.tv_usec,
168                                 mlc->intimeout);
169                          */
170                         rc = 1;
171                         up(&mlc->isem);
172                 }
173                 goto done;
174         }
175  wasup:
176         up(&mlc->isem);
177         rc = 0;
178  done:
179         return rc;
180 }
181
182 static int hp_sdc_mlc_cts(hil_mlc *mlc)
183 {
184         struct hp_sdc_mlc_priv_s *priv;
185
186         priv = mlc->priv;
187
188         /* Try to down the semaphores -- they should be up. */
189         BUG_ON(down_trylock(&mlc->isem));
190         BUG_ON(down_trylock(&mlc->osem));
191
192         up(&mlc->isem);
193         up(&mlc->osem);
194
195         if (down_trylock(&mlc->csem)) {
196                 if (priv->trans.act.semaphore != &mlc->csem)
197                         goto poll;
198                 else
199                         goto busy;
200         }
201
202         if (!(priv->tseq[4] & HP_SDC_USE_LOOP))
203                 goto done;
204
205  poll:
206         priv->trans.act.semaphore = &mlc->csem;
207         priv->trans.actidx = 0;
208         priv->trans.idx = 1;
209         priv->trans.endidx = 5;
210         priv->tseq[0] =
211                 HP_SDC_ACT_POSTCMD | HP_SDC_ACT_DATAIN | HP_SDC_ACT_SEMAPHORE;
212         priv->tseq[1] = HP_SDC_CMD_READ_USE;
213         priv->tseq[2] = 1;
214         priv->tseq[3] = 0;
215         priv->tseq[4] = 0;
216         __hp_sdc_enqueue_transaction(&priv->trans);
217  busy:
218         return 1;
219  done:
220         priv->trans.act.semaphore = &mlc->osem;
221         up(&mlc->csem);
222         return 0;
223 }
224
225 static void hp_sdc_mlc_out(hil_mlc *mlc)
226 {
227         struct hp_sdc_mlc_priv_s *priv;
228
229         priv = mlc->priv;
230
231         /* Try to down the semaphore -- it should be up. */
232         BUG_ON(down_trylock(&mlc->osem));
233
234         if (mlc->opacket & HIL_DO_ALTER_CTRL)
235                 goto do_control;
236
237  do_data:
238         if (priv->emtestmode) {
239                 up(&mlc->osem);
240                 return;
241         }
242         /* Shouldn't be sending commands when loop may be busy */
243         BUG_ON(down_trylock(&mlc->csem));
244         up(&mlc->csem);
245
246         priv->trans.actidx = 0;
247         priv->trans.idx = 1;
248         priv->trans.act.semaphore = &mlc->osem;
249         priv->trans.endidx = 6;
250         priv->tseq[0] =
251                 HP_SDC_ACT_DATAREG | HP_SDC_ACT_POSTCMD | HP_SDC_ACT_SEMAPHORE;
252         priv->tseq[1] = 0x7;
253         priv->tseq[2] =
254                 (mlc->opacket &
255                  (HIL_PKT_ADDR_MASK | HIL_PKT_CMD))
256                    >> HIL_PKT_ADDR_SHIFT;
257         priv->tseq[3] =
258                 (mlc->opacket & HIL_PKT_DATA_MASK)
259                   >> HIL_PKT_DATA_SHIFT;
260         priv->tseq[4] = 0;  /* No timeout */
261         if (priv->tseq[3] == HIL_CMD_DHR)
262                 priv->tseq[4] = 1;
263         priv->tseq[5] = HP_SDC_CMD_DO_HIL;
264         goto enqueue;
265
266  do_control:
267         priv->emtestmode = mlc->opacket & HIL_CTRL_TEST;
268
269         /* we cannot emulate this, it should not be used. */
270         BUG_ON((mlc->opacket & (HIL_CTRL_APE | HIL_CTRL_IPF)) == HIL_CTRL_APE);
271
272         if ((mlc->opacket & HIL_CTRL_ONLY) == HIL_CTRL_ONLY)
273                 goto control_only;
274
275         /* Should not send command/data after engaging APE */
276         BUG_ON(mlc->opacket & HIL_CTRL_APE);
277
278         /* Disengaging APE this way would not be valid either since
279          * the loop must be allowed to idle.
280          *
281          * So, it works out that we really never actually send control
282          * and data when using SDC, we just send the data.
283          */
284         goto do_data;
285
286  control_only:
287         priv->trans.actidx = 0;
288         priv->trans.idx = 1;
289         priv->trans.act.semaphore = &mlc->osem;
290         priv->trans.endidx = 4;
291         priv->tseq[0] =
292           HP_SDC_ACT_PRECMD | HP_SDC_ACT_DATAOUT | HP_SDC_ACT_SEMAPHORE;
293         priv->tseq[1] = HP_SDC_CMD_SET_LPC;
294         priv->tseq[2] = 1;
295         /* priv->tseq[3] = (mlc->ddc + 1) | HP_SDC_LPS_ACSUCC; */
296         priv->tseq[3] = 0;
297         if (mlc->opacket & HIL_CTRL_APE) {
298                 priv->tseq[3] |= HP_SDC_LPC_APE_IPF;
299                 down_trylock(&mlc->csem);
300         }
301  enqueue:
302         hp_sdc_enqueue_transaction(&priv->trans);
303 }
304
305 static int __init hp_sdc_mlc_init(void)
306 {
307         hil_mlc *mlc = &hp_sdc_mlc;
308
309         printk(KERN_INFO PREFIX "Registering the System Domain Controller's HIL MLC.\n");
310
311         hp_sdc_mlc_priv.emtestmode = 0;
312         hp_sdc_mlc_priv.trans.seq = hp_sdc_mlc_priv.tseq;
313         hp_sdc_mlc_priv.trans.act.semaphore = &mlc->osem;
314         hp_sdc_mlc_priv.got5x = 0;
315
316         mlc->cts = &hp_sdc_mlc_cts;
317         mlc->in = &hp_sdc_mlc_in;
318         mlc->out = &hp_sdc_mlc_out;
319         mlc->priv = &hp_sdc_mlc_priv;
320
321         if (hil_mlc_register(mlc)) {
322                 printk(KERN_WARNING PREFIX "Failed to register MLC structure with hil_mlc\n");
323                 goto err0;
324         }
325
326         if (hp_sdc_request_hil_irq(&hp_sdc_mlc_isr)) {
327                 printk(KERN_WARNING PREFIX "Request for raw HIL ISR hook denied\n");
328                 goto err1;
329         }
330         return 0;
331  err1:
332         if (hil_mlc_unregister(mlc))
333                 printk(KERN_ERR PREFIX "Failed to unregister MLC structure with hil_mlc.\n"
334                         "This is bad.  Could cause an oops.\n");
335  err0:
336         return -EBUSY;
337 }
338
339 static void __exit hp_sdc_mlc_exit(void)
340 {
341         hil_mlc *mlc = &hp_sdc_mlc;
342
343         if (hp_sdc_release_hil_irq(&hp_sdc_mlc_isr))
344                 printk(KERN_ERR PREFIX "Failed to release the raw HIL ISR hook.\n"
345                         "This is bad.  Could cause an oops.\n");
346
347         if (hil_mlc_unregister(mlc))
348                 printk(KERN_ERR PREFIX "Failed to unregister MLC structure with hil_mlc.\n"
349                         "This is bad.  Could cause an oops.\n");
350 }
351
352 module_init(hp_sdc_mlc_init);
353 module_exit(hp_sdc_mlc_exit);