git.oblomov.eu Git - linux-2.6/blob - drivers/staging/wlan-ng/p80211netdev.c

   1 /* src/p80211/p80211knetdev.c
   2 *
   3 * Linux Kernel net device interface
   4 *
   5 * Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
   6 * --------------------------------------------------------------------
   7 *
   8 * linux-wlan
   9 *
  10 *   The contents of this file are subject to the Mozilla Public
  11 *   License Version 1.1 (the "License"); you may not use this file
  12 *   except in compliance with the License. You may obtain a copy of
  13 *   the License at http://www.mozilla.org/MPL/
  14 *
  15 *   Software distributed under the License is distributed on an "AS
  16 *   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
  17 *   implied. See the License for the specific language governing
  18 *   rights and limitations under the License.
  19 *
  20 *   Alternatively, the contents of this file may be used under the
  21 *   terms of the GNU Public License version 2 (the "GPL"), in which
  22 *   case the provisions of the GPL are applicable instead of the
  23 *   above.  If you wish to allow the use of your version of this file
  24 *   only under the terms of the GPL and not to allow others to use
  25 *   your version of this file under the MPL, indicate your decision
  26 *   by deleting the provisions above and replace them with the notice
  27 *   and other provisions required by the GPL.  If you do not delete
  28 *   the provisions above, a recipient may use your version of this
  29 *   file under either the MPL or the GPL.
  30 *
  31 * --------------------------------------------------------------------
  32 *
  33 * Inquiries regarding the linux-wlan Open Source project can be
  34 * made directly to:
  35 *
  36 * AbsoluteValue Systems Inc.
  37 * info@linux-wlan.com
  38 * http://www.linux-wlan.com
  39 *
  40 * --------------------------------------------------------------------
  41 *
  42 * Portions of the development of this software were funded by
  43 * Intersil Corporation as part of PRISM(R) chipset product development.
  44 *
  45 * --------------------------------------------------------------------
  46 *
  47 * The functions required for a Linux network device are defined here.
  48 *
  49 * --------------------------------------------------------------------
  50 */
  51
  52
  53 /*================================================================*/
  54 /* System Includes */
  55
  56
  57 #include <linux/version.h>
  58
  59 #include <linux/module.h>
  60 #include <linux/kernel.h>
  61 #include <linux/sched.h>
  62 #include <linux/types.h>
  63 #include <linux/skbuff.h>
  64 #include <linux/slab.h>
  65 #include <linux/proc_fs.h>
  66 #include <linux/interrupt.h>
  67 #include <linux/netdevice.h>
  68 #include <linux/kmod.h>
  69 #include <linux/if_arp.h>
  70 #include <linux/wireless.h>
  71 #include <linux/sockios.h>
  72 #include <linux/etherdevice.h>
  73
  74 #include <asm/bitops.h>
  75 #include <asm/uaccess.h>
  76 #include <asm/byteorder.h>
  77
  78 #ifdef SIOCETHTOOL
  79 #include <linux/ethtool.h>
  80 #endif
  81
  82 #include <net/iw_handler.h>
  83 #include <net/net_namespace.h>
  84
  85 /*================================================================*/
  86 /* Project Includes */
  87
  88 #include "wlan_compat.h"
  89 #include "p80211types.h"
  90 #include "p80211hdr.h"
  91 #include "p80211conv.h"
  92 #include "p80211mgmt.h"
  93 #include "p80211msg.h"
  94 #include "p80211netdev.h"
  95 #include "p80211ioctl.h"
  96 #include "p80211req.h"
  97 #include "p80211metastruct.h"
  98 #include "p80211metadef.h"
  99
 100 /*================================================================*/
 101 /* Local Constants */
 102
 103 /*================================================================*/
 104 /* Local Macros */
 105
 106
 107 /*================================================================*/
 108 /* Local Types */
 109
 110 /*================================================================*/
 111 /* Local Function Declarations */
 112
 113 /* Support functions */
 114 static void p80211netdev_rx_bh(unsigned long arg);
 115
 116 /* netdevice method functions */
 117 static int p80211knetdev_init( netdevice_t *netdev);
 118 static struct net_device_stats* p80211knetdev_get_stats(netdevice_t *netdev);
 119 static int p80211knetdev_open( netdevice_t *netdev);
 120 static int p80211knetdev_stop( netdevice_t *netdev );
 121 static int p80211knetdev_hard_start_xmit( struct sk_buff *skb, netdevice_t *netdev);
 122 static void p80211knetdev_set_multicast_list(netdevice_t *dev);
 123 static int p80211knetdev_do_ioctl(netdevice_t *dev, struct ifreq *ifr, int cmd);
 124 static int p80211knetdev_set_mac_address(netdevice_t *dev, void *addr);
 125 static void p80211knetdev_tx_timeout(netdevice_t *netdev);
 126 static int p80211_rx_typedrop( wlandevice_t *wlandev, u16 fc);
 127
 128 int wlan_watchdog = 5000;
 129 module_param(wlan_watchdog, int, 0644);
 130 MODULE_PARM_DESC(wlan_watchdog, "transmit timeout in milliseconds");
 131
 132 int wlan_wext_write = 1;
 133 module_param(wlan_wext_write, int, 0644);
 134 MODULE_PARM_DESC(wlan_wext_write, "enable write wireless extensions");
 135
 136 #ifdef WLAN_INCLUDE_DEBUG
 137 int wlan_debug=0;
 138 module_param(wlan_debug, int, 0644);
 139 MODULE_PARM_DESC(wlan_debug, "p80211 debug level");
 140 #endif
 141
 142 /*================================================================*/
 143 /* Function Definitions */
 144
 145 /*----------------------------------------------------------------
 146 * p80211knetdev_init
 147 *
 148 * Init method for a Linux netdevice.  Called in response to
 149 * register_netdev.
 150 *
 151 * Arguments:
 152 *       none
 153 *
 154 * Returns:
 155 *       nothing
 156 ----------------------------------------------------------------*/
 157 static int p80211knetdev_init( netdevice_t *netdev)
 158 {
 159         DBFENTER;
 160         /* Called in response to register_netdev */
 161         /* This is usually the probe function, but the probe has */
 162         /* already been done by the MSD and the create_kdev */
 163         /* function.  All we do here is return success */
 164         DBFEXIT;
 165         return 0;
 166 }
 167
 168
 169 /*----------------------------------------------------------------
 170 * p80211knetdev_get_stats
 171 *
 172 * Statistics retrieval for linux netdevices.  Here we're reporting
 173 * the Linux i/f level statistics.  Hence, for the primary numbers,
 174 * we don't want to report the numbers from the MIB.  Eventually,
 175 * it might be useful to collect some of the error counters though.
 176 *
 177 * Arguments:
 178 *       netdev          Linux netdevice
 179 *
 180 * Returns:
 181 *       the address of the statistics structure
 182 ----------------------------------------------------------------*/
 183 static struct net_device_stats*
 184 p80211knetdev_get_stats(netdevice_t *netdev)
 185 {
 186         wlandevice_t    *wlandev = netdev->ml_priv;
 187         DBFENTER;
 188
 189         /* TODO: review the MIB stats for items that correspond to
 190                 linux stats */
 191
 192         DBFEXIT;
 193         return &(wlandev->linux_stats);
 194 }
 195
 196
 197 /*----------------------------------------------------------------
 198 * p80211knetdev_open
 199 *
 200 * Linux netdevice open method.  Following a successful call here,
 201 * the device is supposed to be ready for tx and rx.  In our
 202 * situation that may not be entirely true due to the state of the
 203 * MAC below.
 204 *
 205 * Arguments:
 206 *       netdev          Linux network device structure
 207 *
 208 * Returns:
 209 *       zero on success, non-zero otherwise
 210 ----------------------------------------------------------------*/
 211 static int p80211knetdev_open( netdevice_t *netdev )
 212 {
 213         int             result = 0; /* success */
 214         wlandevice_t    *wlandev = netdev->ml_priv;
 215
 216         DBFENTER;
 217
 218         /* Check to make sure the MSD is running */
 219         if ( wlandev->msdstate != WLAN_MSD_RUNNING ) {
 220                 return -ENODEV;
 221         }
 222
 223         /* Tell the MSD to open */
 224         if ( wlandev->open != NULL) {
 225                 result = wlandev->open(wlandev);
 226                 if ( result == 0 ) {
 227                         netif_start_queue(wlandev->netdev);
 228                         wlandev->state = WLAN_DEVICE_OPEN;
 229                 }
 230         } else {
 231                 result = -EAGAIN;
 232         }
 233
 234         DBFEXIT;
 235         return result;
 236 }
 237
 238
 239 /*----------------------------------------------------------------
 240 * p80211knetdev_stop
 241 *
 242 * Linux netdevice stop (close) method.  Following this call,
 243 * no frames should go up or down through this interface.
 244 *
 245 * Arguments:
 246 *       netdev          Linux network device structure
 247 *
 248 * Returns:
 249 *       zero on success, non-zero otherwise
 250 ----------------------------------------------------------------*/
 251 static int p80211knetdev_stop( netdevice_t *netdev )
 252 {
 253         int             result = 0;
 254         wlandevice_t    *wlandev = netdev->ml_priv;
 255
 256         DBFENTER;
 257
 258         if ( wlandev->close != NULL ) {
 259                 result = wlandev->close(wlandev);
 260         }
 261
 262         netif_stop_queue(wlandev->netdev);
 263         wlandev->state = WLAN_DEVICE_CLOSED;
 264
 265         DBFEXIT;
 266         return result;
 267 }
 268
 269 /*----------------------------------------------------------------
 270 * p80211netdev_rx
 271 *
 272 * Frame receive function called by the mac specific driver.
 273 *
 274 * Arguments:
 275 *       wlandev         WLAN network device structure
 276 *       skb             skbuff containing a full 802.11 frame.
 277 * Returns:
 278 *       nothing
 279 * Side effects:
 280 *
 281 ----------------------------------------------------------------*/
 282 void
 283 p80211netdev_rx(wlandevice_t *wlandev, struct sk_buff *skb )
 284 {
 285         DBFENTER;
 286
 287         /* Enqueue for post-irq processing */
 288         skb_queue_tail(&wlandev->nsd_rxq, skb);
 289
 290         tasklet_schedule(&wlandev->rx_bh);
 291
 292         DBFEXIT;
 293         return;
 294 }
 295
 296 /*----------------------------------------------------------------
 297 * p80211netdev_rx_bh
 298 *
 299 * Deferred processing of all received frames.
 300 *
 301 * Arguments:
 302 *       wlandev         WLAN network device structure
 303 *       skb             skbuff containing a full 802.11 frame.
 304 * Returns:
 305 *       nothing
 306 * Side effects:
 307 *
 308 ----------------------------------------------------------------*/
 309 static void p80211netdev_rx_bh(unsigned long arg)
 310 {
 311         wlandevice_t *wlandev = (wlandevice_t *) arg;
 312         struct sk_buff *skb = NULL;
 313         netdevice_t     *dev = wlandev->netdev;
 314         p80211_hdr_a3_t *hdr;
 315         u16 fc;
 316
 317         DBFENTER;
 318
 319         /* Let's empty our our queue */
 320         while ( (skb = skb_dequeue(&wlandev->nsd_rxq)) ) {
 321                 if (wlandev->state == WLAN_DEVICE_OPEN) {
 322
 323                         if (dev->type != ARPHRD_ETHER) {
 324                                 /* RAW frame; we shouldn't convert it */
 325                                 // XXX Append the Prism Header here instead.
 326
 327                                 /* set up various data fields */
 328                                 skb->dev = dev;
 329                                 skb_reset_mac_header(skb);
 330                                 skb->ip_summed = CHECKSUM_NONE;
 331                                 skb->pkt_type = PACKET_OTHERHOST;
 332                                 skb->protocol = htons(ETH_P_80211_RAW);
 333                                 dev->last_rx = jiffies;
 334
 335                                 wlandev->linux_stats.rx_packets++;
 336                                 wlandev->linux_stats.rx_bytes += skb->len;
 337                                 netif_rx_ni(skb);
 338                                 continue;
 339                         } else {
 340                                 hdr = (p80211_hdr_a3_t *)skb->data;
 341                                 fc = ieee2host16(hdr->fc);
 342                                 if (p80211_rx_typedrop(wlandev, fc)) {
 343                                         dev_kfree_skb(skb);
 344                                         continue;
 345                                 }
 346
 347                                 /* perform mcast filtering */
 348                                 if (wlandev->netdev->flags & IFF_ALLMULTI) {
 349                                         /* allow my local address through */
 350                                         if (memcmp(hdr->a1, wlandev->netdev->dev_addr, WLAN_ADDR_LEN) != 0) {
 351                                                 /* but reject anything else that isn't multicast */
 352                                                 if (!(hdr->a1[0] & 0x01)) {
 353                                                         dev_kfree_skb(skb);
 354                                                         continue;
 355                                                 }
 356                                         }
 357                                 }
 358
 359                                 if ( skb_p80211_to_ether(wlandev, wlandev->ethconv, skb) == 0 ) {
 360                                         skb->dev->last_rx = jiffies;
 361                                         wlandev->linux_stats.rx_packets++;
 362                                         wlandev->linux_stats.rx_bytes += skb->len;
 363                                         netif_rx_ni(skb);
 364                                         continue;
 365                                 }
 366                                 WLAN_LOG_DEBUG(1, "p80211_to_ether failed.\n");
 367                         }
 368                 }
 369                 dev_kfree_skb(skb);
 370         }
 371
 372         DBFEXIT;
 373 }
 374
 375
 376 /*----------------------------------------------------------------
 377 * p80211knetdev_hard_start_xmit
 378 *
 379 * Linux netdevice method for transmitting a frame.
 380 *
 381 * Arguments:
 382 *       skb     Linux sk_buff containing the frame.
 383 *       netdev  Linux netdevice.
 384 *
 385 * Side effects:
 386 *       If the lower layers report that buffers are full. netdev->tbusy
 387 *       will be set to prevent higher layers from sending more traffic.
 388 *
 389 *       Note: If this function returns non-zero, higher layers retain
 390 *             ownership of the skb.
 391 *
 392 * Returns:
 393 *       zero on success, non-zero on failure.
 394 ----------------------------------------------------------------*/
 395 static int p80211knetdev_hard_start_xmit( struct sk_buff *skb, netdevice_t *netdev)
 396 {
 397         int             result = 0;
 398         int             txresult = -1;
 399         wlandevice_t    *wlandev = netdev->ml_priv;
 400         p80211_hdr_t    p80211_hdr;
 401         p80211_metawep_t p80211_wep;
 402
 403         DBFENTER;
 404
 405         if (skb == NULL) {
 406                 return 0;
 407         }
 408
 409         if (wlandev->state != WLAN_DEVICE_OPEN) {
 410                 result = 1;
 411                 goto failed;
 412         }
 413
 414         memset(&p80211_hdr, 0, sizeof(p80211_hdr_t));
 415         memset(&p80211_wep, 0, sizeof(p80211_metawep_t));
 416
 417         if ( netif_queue_stopped(netdev) ) {
 418                 WLAN_LOG_DEBUG(1, "called when queue stopped.\n");
 419                 result = 1;
 420                 goto failed;
 421         }
 422
 423         netif_stop_queue(netdev);
 424
 425         /* Check to see that a valid mode is set */
 426         switch( wlandev->macmode ) {
 427         case WLAN_MACMODE_IBSS_STA:
 428         case WLAN_MACMODE_ESS_STA:
 429         case WLAN_MACMODE_ESS_AP:
 430                 break;
 431         default:
 432                 /* Mode isn't set yet, just drop the frame
 433                  * and return success .
 434                  * TODO: we need a saner way to handle this
 435                  */
 436                 if(skb->protocol != ETH_P_80211_RAW) {
 437                         netif_start_queue(wlandev->netdev);
 438                         WLAN_LOG_NOTICE(
 439                                 "Tx attempt prior to association, frame dropped.\n");
 440                         wlandev->linux_stats.tx_dropped++;
 441                         result = 0;
 442                         goto failed;
 443                 }
 444                 break;
 445         }
 446
 447         /* Check for raw transmits */
 448         if(skb->protocol == ETH_P_80211_RAW) {
 449                 if (!capable(CAP_NET_ADMIN)) {
 450                         result = 1;
 451                         goto failed;
 452                 }
 453                 /* move the header over */
 454                 memcpy(&p80211_hdr, skb->data, sizeof(p80211_hdr_t));
 455                 skb_pull(skb, sizeof(p80211_hdr_t));
 456         } else {
 457                 if ( skb_ether_to_p80211(wlandev, wlandev->ethconv, skb, &p80211_hdr, &p80211_wep) != 0 ) {
 458                         /* convert failed */
 459                         WLAN_LOG_DEBUG(1, "ether_to_80211(%d) failed.\n",
 460                                         wlandev->ethconv);
 461                         result = 1;
 462                         goto failed;
 463                 }
 464         }
 465         if ( wlandev->txframe == NULL ) {
 466                 result = 1;
 467                 goto failed;
 468         }
 469
 470         netdev->trans_start = jiffies;
 471
 472         wlandev->linux_stats.tx_packets++;
 473         /* count only the packet payload */
 474         wlandev->linux_stats.tx_bytes += skb->len;
 475
 476         txresult = wlandev->txframe(wlandev, skb, &p80211_hdr, &p80211_wep);
 477
 478         if ( txresult == 0) {
 479                 /* success and more buf */
 480                 /* avail, re: hw_txdata */
 481                 netif_wake_queue(wlandev->netdev);
 482                 result = 0;
 483         } else if ( txresult == 1 ) {
 484                 /* success, no more avail */
 485                 WLAN_LOG_DEBUG(3, "txframe success, no more bufs\n");
 486                 /* netdev->tbusy = 1;  don't set here, irqhdlr */
 487                 /*   may have already cleared it */
 488                 result = 0;
 489         } else if ( txresult == 2 ) {
 490                 /* alloc failure, drop frame */
 491                 WLAN_LOG_DEBUG(3, "txframe returned alloc_fail\n");
 492                 result = 1;
 493         } else {
 494                 /* buffer full or queue busy, drop frame. */
 495                 WLAN_LOG_DEBUG(3, "txframe returned full or busy\n");
 496                 result = 1;
 497         }
 498
 499  failed:
 500         /* Free up the WEP buffer if it's not the same as the skb */
 501         if ((p80211_wep.data) && (p80211_wep.data != skb->data))
 502                 kfree(p80211_wep.data);
 503
 504         /* we always free the skb here, never in a lower level. */
 505         if (!result)
 506                 dev_kfree_skb(skb);
 507
 508         DBFEXIT;
 509         return result;
 510 }
 511
 512
 513 /*----------------------------------------------------------------
 514 * p80211knetdev_set_multicast_list
 515 *
 516 * Called from higher lavers whenever there's a need to set/clear
 517 * promiscuous mode or rewrite the multicast list.
 518 *
 519 * Arguments:
 520 *       none
 521 *
 522 * Returns:
 523 *       nothing
 524 ----------------------------------------------------------------*/
 525 static void p80211knetdev_set_multicast_list(netdevice_t *dev)
 526 {
 527         wlandevice_t    *wlandev = dev->ml_priv;
 528
 529         DBFENTER;
 530
 531         /* TODO:  real multicast support as well */
 532
 533         if (wlandev->set_multicast_list)
 534                 wlandev->set_multicast_list(wlandev, dev);
 535
 536         DBFEXIT;
 537 }
 538
 539 #ifdef SIOCETHTOOL
 540
 541 static int p80211netdev_ethtool(wlandevice_t *wlandev, void __user *useraddr)
 542 {
 543         u32 ethcmd;
 544         struct ethtool_drvinfo info;
 545         struct ethtool_value edata;
 546
 547         memset(&info, 0, sizeof(info));
 548         memset(&edata, 0, sizeof(edata));
 549
 550         if (copy_from_user(&ethcmd, useraddr, sizeof(ethcmd)))
 551                 return -EFAULT;
 552
 553         switch (ethcmd) {
 554         case ETHTOOL_GDRVINFO:
 555                 info.cmd = ethcmd;
 556                 snprintf(info.driver, sizeof(info.driver), "p80211_%s",
 557                          wlandev->nsdname);
 558                 snprintf(info.version, sizeof(info.version), "%s",
 559                          WLAN_RELEASE);
 560
 561                 // info.fw_version
 562                 // info.bus_info
 563
 564                 if (copy_to_user(useraddr, &info, sizeof(info)))
 565                         return -EFAULT;
 566                 return 0;
 567 #ifdef ETHTOOL_GLINK
 568         case ETHTOOL_GLINK:
 569                 edata.cmd = ethcmd;
 570
 571                 if (wlandev->linkstatus &&
 572                     (wlandev->macmode != WLAN_MACMODE_NONE)) {
 573                         edata.data = 1;
 574                 } else {
 575                         edata.data = 0;
 576                 }
 577
 578                 if (copy_to_user(useraddr, &edata, sizeof(edata)))
 579                         return -EFAULT;
 580                 return 0;
 581         }
 582 #endif
 583
 584         return -EOPNOTSUPP;
 585 }
 586
 587 #endif
 588
 589 /*----------------------------------------------------------------
 590 * p80211knetdev_do_ioctl
 591 *
 592 * Handle an ioctl call on one of our devices.  Everything Linux
 593 * ioctl specific is done here.  Then we pass the contents of the
 594 * ifr->data to the request message handler.
 595 *
 596 * Arguments:
 597 *       dev     Linux kernel netdevice
 598 *       ifr     Our private ioctl request structure, typed for the
 599 *               generic struct ifreq so we can use ptr to func
 600 *               w/o cast.
 601 *
 602 * Returns:
 603 *       zero on success, a negative errno on failure.  Possible values:
 604 *               -ENETDOWN Device isn't up.
 605 *               -EBUSY  cmd already in progress
 606 *               -ETIME  p80211 cmd timed out (MSD may have its own timers)
 607 *               -EFAULT memory fault copying msg from user buffer
 608 *               -ENOMEM unable to allocate kernel msg buffer
 609 *               -ENOSYS bad magic, it the cmd really for us?
 610 *               -EintR  sleeping on cmd, awakened by signal, cmd cancelled.
 611 *
 612 * Call Context:
 613 *       Process thread (ioctl caller).  TODO: SMP support may require
 614 *       locks.
 615 ----------------------------------------------------------------*/
 616 static int p80211knetdev_do_ioctl(netdevice_t *dev, struct ifreq *ifr, int cmd)
 617 {
 618         int                     result = 0;
 619         p80211ioctl_req_t       *req = (p80211ioctl_req_t*)ifr;
 620         wlandevice_t            *wlandev = dev->ml_priv;
 621         u8                      *msgbuf;
 622         DBFENTER;
 623
 624         WLAN_LOG_DEBUG(2, "rx'd ioctl, cmd=%d, len=%d\n", cmd, req->len);
 625
 626 #ifdef SIOCETHTOOL
 627         if (cmd == SIOCETHTOOL) {
 628                 result = p80211netdev_ethtool(wlandev, (void __user *) ifr->ifr_data);
 629                 goto bail;
 630         }
 631 #endif
 632
 633         /* Test the magic, assume ifr is good if it's there */
 634         if ( req->magic != P80211_IOCTL_MAGIC ) {
 635                 result = -ENOSYS;
 636                 goto bail;
 637         }
 638
 639         if ( cmd == P80211_IFTEST ) {
 640                 result = 0;
 641                 goto bail;
 642         } else if ( cmd != P80211_IFREQ ) {
 643                 result = -ENOSYS;
 644                 goto bail;
 645         }
 646
 647         /* Allocate a buf of size req->len */
 648         if ((msgbuf = kmalloc( req->len, GFP_KERNEL))) {
 649                 if ( copy_from_user( msgbuf, (void __user *) req->data, req->len) ) {
 650                         result = -EFAULT;
 651                 } else {
 652                         result = p80211req_dorequest( wlandev, msgbuf);
 653                 }
 654
 655                 if ( result == 0 ) {
 656                         if ( copy_to_user( (void __user *) req->data, msgbuf, req->len)) {
 657                                 result = -EFAULT;
 658                         }
 659                 }
 660                 kfree(msgbuf);
 661         } else {
 662                 result = -ENOMEM;
 663         }
 664 bail:
 665         DBFEXIT;
 666
 667         return result; /* If allocate,copyfrom or copyto fails, return errno */
 668 }
 669
 670 /*----------------------------------------------------------------
 671 * p80211knetdev_set_mac_address
 672 *
 673 * Handles the ioctl for changing the MACAddress of a netdevice
 674 *
 675 * references: linux/netdevice.h and drivers/net/net_init.c
 676 *
 677 * NOTE: [MSM] We only prevent address changes when the netdev is
 678 * up.  We don't control anything based on dot11 state.  If the
 679 * address is changed on a STA that's currently associated, you
 680 * will probably lose the ability to send and receive data frames.
 681 * Just be aware.  Therefore, this should usually only be done
 682 * prior to scan/join/auth/assoc.
 683 *
 684 * Arguments:
 685 *       dev     netdevice struct
 686 *       addr    the new MACAddress (a struct)
 687 *
 688 * Returns:
 689 *       zero on success, a negative errno on failure.  Possible values:
 690 *               -EBUSY  device is bussy (cmd not possible)
 691 *               -and errors returned by: p80211req_dorequest(..)
 692 *
 693 * by: Collin R. Mulliner <collin@mulliner.org>
 694 ----------------------------------------------------------------*/
 695 static int p80211knetdev_set_mac_address(netdevice_t *dev, void *addr)
 696 {
 697         struct sockaddr                 *new_addr = addr;
 698         p80211msg_dot11req_mibset_t     dot11req;
 699         p80211item_unk392_t             *mibattr;
 700         p80211item_pstr6_t              *macaddr;
 701         p80211item_uint32_t             *resultcode;
 702         int result = 0;
 703
 704         DBFENTER;
 705         /* If we're running, we don't allow MAC address changes */
 706         if (netif_running(dev)) {
 707                 return -EBUSY;
 708         }
 709
 710         /* Set up some convenience pointers. */
 711         mibattr = &dot11req.mibattribute;
 712         macaddr = (p80211item_pstr6_t*)&mibattr->data;
 713         resultcode = &dot11req.resultcode;
 714
 715         /* Set up a dot11req_mibset */
 716         memset(&dot11req, 0, sizeof(p80211msg_dot11req_mibset_t));
 717         dot11req.msgcode = DIDmsg_dot11req_mibset;
 718         dot11req.msglen = sizeof(p80211msg_dot11req_mibset_t);
 719         memcpy(dot11req.devname,
 720                 ((wlandevice_t *)dev->ml_priv)->name,
 721                 WLAN_DEVNAMELEN_MAX - 1);
 722
 723         /* Set up the mibattribute argument */
 724         mibattr->did = DIDmsg_dot11req_mibset_mibattribute;
 725         mibattr->status = P80211ENUM_msgitem_status_data_ok;
 726         mibattr->len = sizeof(mibattr->data);
 727
 728         macaddr->did = DIDmib_dot11mac_dot11OperationTable_dot11MACAddress;
 729         macaddr->status = P80211ENUM_msgitem_status_data_ok;
 730         macaddr->len = sizeof(macaddr->data);
 731         macaddr->data.len = WLAN_ADDR_LEN;
 732         memcpy(&macaddr->data.data, new_addr->sa_data, WLAN_ADDR_LEN);
 733
 734         /* Set up the resultcode argument */
 735         resultcode->did = DIDmsg_dot11req_mibset_resultcode;
 736         resultcode->status = P80211ENUM_msgitem_status_no_value;
 737         resultcode->len = sizeof(resultcode->data);
 738         resultcode->data = 0;
 739
 740         /* now fire the request */
 741         result = p80211req_dorequest(dev->ml_priv, (u8 *)&dot11req);
 742
 743         /* If the request wasn't successful, report an error and don't
 744          * change the netdev address
 745          */
 746         if ( result != 0 || resultcode->data != P80211ENUM_resultcode_success) {
 747                 WLAN_LOG_ERROR(
 748                 "Low-level driver failed dot11req_mibset(dot11MACAddress).\n");
 749                 result = -EADDRNOTAVAIL;
 750         } else {
 751                 /* everything's ok, change the addr in netdev */
 752                 memcpy(dev->dev_addr, new_addr->sa_data, dev->addr_len);
 753         }
 754
 755         DBFEXIT;
 756         return result;
 757 }
 758
 759 static int wlan_change_mtu(netdevice_t *dev, int new_mtu)
 760 {
 761         DBFENTER;
 762         // 2312 is max 802.11 payload, 20 is overhead, (ether + llc +snap)
 763         // and another 8 for wep.
 764         if ( (new_mtu < 68) || (new_mtu > (2312 - 20 - 8)))
 765                 return -EINVAL;
 766
 767         dev->mtu = new_mtu;
 768
 769         DBFEXIT;
 770
 771         return 0;
 772 }
 773
 774
 775
 776 /*----------------------------------------------------------------
 777 * wlan_setup
 778 *
 779 * Roughly matches the functionality of ether_setup.  Here
 780 * we set up any members of the wlandevice structure that are common
 781 * to all devices.  Additionally, we allocate a linux 'struct device'
 782 * and perform the same setup as ether_setup.
 783 *
 784 * Note: It's important that the caller have setup the wlandev->name
 785 *       ptr prior to calling this function.
 786 *
 787 * Arguments:
 788 *       wlandev         ptr to the wlandev structure for the
 789 *                       interface.
 790 * Returns:
 791 *       zero on success, non-zero otherwise.
 792 * Call Context:
 793 *       Should be process thread.  We'll assume it might be
 794 *       interrupt though.  When we add support for statically
 795 *       compiled drivers, this function will be called in the
 796 *       context of the kernel startup code.
 797 ----------------------------------------------------------------*/
 798 int wlan_setup(wlandevice_t *wlandev)
 799 {
 800         int             result = 0;
 801         netdevice_t     *dev;
 802
 803         DBFENTER;
 804
 805         /* Set up the wlandev */
 806         wlandev->state = WLAN_DEVICE_CLOSED;
 807         wlandev->ethconv = WLAN_ETHCONV_8021h;
 808         wlandev->macmode = WLAN_MACMODE_NONE;
 809
 810         /* Set up the rx queue */
 811         skb_queue_head_init(&wlandev->nsd_rxq);
 812         tasklet_init(&wlandev->rx_bh,
 813                      p80211netdev_rx_bh,
 814                      (unsigned long)wlandev);
 815
 816         /* Allocate and initialize the struct device */
 817         dev = alloc_netdev(0,"wlan%d",ether_setup);
 818         if ( dev == NULL ) {
 819                 WLAN_LOG_ERROR("Failed to alloc netdev.\n");
 820                 result = 1;
 821         } else {
 822                 wlandev->netdev = dev;
 823                 dev->ml_priv = wlandev;
 824                 dev->hard_start_xmit =  p80211knetdev_hard_start_xmit;
 825                 dev->get_stats =        p80211knetdev_get_stats;
 826 #ifdef HAVE_PRIVATE_IOCTL
 827                 dev->do_ioctl =         p80211knetdev_do_ioctl;
 828 #endif
 829 #ifdef HAVE_MULTICAST
 830                 dev->set_multicast_list = p80211knetdev_set_multicast_list;
 831 #endif
 832                 dev->init =             p80211knetdev_init;
 833                 dev->open =             p80211knetdev_open;
 834                 dev->stop =             p80211knetdev_stop;
 835
 836 #if (WIRELESS_EXT < 21)
 837                 dev->get_wireless_stats = p80211wext_get_wireless_stats;
 838 #endif
 839                 dev->wireless_handlers = &p80211wext_handler_def;
 840
 841                 netif_stop_queue(dev);
 842 #ifdef HAVE_CHANGE_MTU
 843                 dev->change_mtu = wlan_change_mtu;
 844 #endif
 845 #ifdef HAVE_SET_MAC_ADDR
 846                 dev->set_mac_address =  p80211knetdev_set_mac_address;
 847 #endif
 848 #ifdef HAVE_TX_TIMEOUT
 849                 dev->tx_timeout      =  &p80211knetdev_tx_timeout;
 850                 dev->watchdog_timeo  =  (wlan_watchdog * HZ) / 1000;
 851 #endif
 852                 netif_carrier_off(dev);
 853         }
 854
 855         DBFEXIT;
 856         return result;
 857 }
 858
 859 /*----------------------------------------------------------------
 860 * wlan_unsetup
 861 *
 862 * This function is paired with the wlan_setup routine.  It should
 863 * be called after unregister_wlandev.  Basically, all it does is
 864 * free the 'struct device' that's associated with the wlandev.
 865 * We do it here because the 'struct device' isn't allocated
 866 * explicitly in the driver code, it's done in wlan_setup.  To
 867 * do the free in the driver might seem like 'magic'.
 868 *
 869 * Arguments:
 870 *       wlandev         ptr to the wlandev structure for the
 871 *                       interface.
 872 * Returns:
 873 *       zero on success, non-zero otherwise.
 874 * Call Context:
 875 *       Should be process thread.  We'll assume it might be
 876 *       interrupt though.  When we add support for statically
 877 *       compiled drivers, this function will be called in the
 878 *       context of the kernel startup code.
 879 ----------------------------------------------------------------*/
 880 int wlan_unsetup(wlandevice_t *wlandev)
 881 {
 882         int             result = 0;
 883
 884         DBFENTER;
 885
 886         tasklet_kill(&wlandev->rx_bh);
 887
 888         if (wlandev->netdev == NULL ) {
 889                 WLAN_LOG_ERROR("called without wlandev->netdev set.\n");
 890                 result = 1;
 891         } else {
 892                 free_netdev(wlandev->netdev);
 893                 wlandev->netdev = NULL;
 894         }
 895
 896         DBFEXIT;
 897         return 0;
 898 }
 899
 900
 901
 902 /*----------------------------------------------------------------
 903 * register_wlandev
 904 *
 905 * Roughly matches the functionality of register_netdev.  This function
 906 * is called after the driver has successfully probed and set up the
 907 * resources for the device.  It's now ready to become a named device
 908 * in the Linux system.
 909 *
 910 * First we allocate a name for the device (if not already set), then
 911 * we call the Linux function register_netdevice.
 912 *
 913 * Arguments:
 914 *       wlandev         ptr to the wlandev structure for the
 915 *                       interface.
 916 * Returns:
 917 *       zero on success, non-zero otherwise.
 918 * Call Context:
 919 *       Can be either interrupt or not.
 920 ----------------------------------------------------------------*/
 921 int register_wlandev(wlandevice_t *wlandev)
 922 {
 923         int             i = 0;
 924
 925         DBFENTER;
 926
 927         i = register_netdev(wlandev->netdev);
 928         if (i)
 929                 return i;
 930
 931         DBFEXIT;
 932         return 0;
 933 }
 934
 935
 936 /*----------------------------------------------------------------
 937 * unregister_wlandev
 938 *
 939 * Roughly matches the functionality of unregister_netdev.  This
 940 * function is called to remove a named device from the system.
 941 *
 942 * First we tell linux that the device should no longer exist.
 943 * Then we remove it from the list of known wlan devices.
 944 *
 945 * Arguments:
 946 *       wlandev         ptr to the wlandev structure for the
 947 *                       interface.
 948 * Returns:
 949 *       zero on success, non-zero otherwise.
 950 * Call Context:
 951 *       Can be either interrupt or not.
 952 ----------------------------------------------------------------*/
 953 int unregister_wlandev(wlandevice_t *wlandev)
 954 {
 955         struct sk_buff *skb;
 956
 957         DBFENTER;
 958
 959         unregister_netdev(wlandev->netdev);
 960
 961         /* Now to clean out the rx queue */
 962         while ( (skb = skb_dequeue(&wlandev->nsd_rxq)) ) {
 963                 dev_kfree_skb(skb);
 964         }
 965
 966         DBFEXIT;
 967         return 0;
 968 }
 969
 970
 971 /*----------------------------------------------------------------
 972 * p80211netdev_hwremoved
 973 *
 974 * Hardware removed notification. This function should be called
 975 * immediately after an MSD has detected that the underlying hardware
 976 * has been yanked out from under us.  The primary things we need
 977 * to do are:
 978 *   - Mark the wlandev
 979 *   - Prevent any further traffic from the knetdev i/f
 980 *   - Prevent any further requests from mgmt i/f
 981 *   - If there are any waitq'd mgmt requests or mgmt-frame exchanges,
 982 *     shut them down.
 983 *   - Call the MSD hwremoved function.
 984 *
 985 * The remainder of the cleanup will be handled by unregister().
 986 * Our primary goal here is to prevent as much tickling of the MSD
 987 * as possible since the MSD is already in a 'wounded' state.
 988 *
 989 * TODO: As new features are added, this function should be
 990 *       updated.
 991 *
 992 * Arguments:
 993 *       wlandev         WLAN network device structure
 994 * Returns:
 995 *       nothing
 996 * Side effects:
 997 *
 998 * Call context:
 999 *       Usually interrupt.
1000 ----------------------------------------------------------------*/
1001 void p80211netdev_hwremoved(wlandevice_t *wlandev)
1002 {
1003         DBFENTER;
1004         wlandev->hwremoved = 1;
1005         if ( wlandev->state == WLAN_DEVICE_OPEN) {
1006                 netif_stop_queue(wlandev->netdev);
1007         }
1008
1009         netif_device_detach(wlandev->netdev);
1010
1011         DBFEXIT;
1012 }
1013
1014
1015 /*----------------------------------------------------------------
1016 * p80211_rx_typedrop
1017 *
1018 * Classifies the frame, increments the appropriate counter, and
1019 * returns 0|1|2 indicating whether the driver should handle, ignore, or
1020 * drop the frame
1021 *
1022 * Arguments:
1023 *       wlandev         wlan device structure
1024 *       fc              frame control field
1025 *
1026 * Returns:
1027 *       zero if the frame should be handled by the driver,
1028 *       one if the frame should be ignored
1029 *       anything else means we drop it.
1030 *
1031 * Side effects:
1032 *
1033 * Call context:
1034 *       interrupt
1035 ----------------------------------------------------------------*/
1036 static int p80211_rx_typedrop( wlandevice_t *wlandev, u16 fc)
1037 {
1038         u16     ftype;
1039         u16     fstype;
1040         int     drop = 0;
1041         /* Classify frame, increment counter */
1042         ftype = WLAN_GET_FC_FTYPE(fc);
1043         fstype = WLAN_GET_FC_FSTYPE(fc);
1044 #if 0
1045         WLAN_LOG_DEBUG(4,
1046                 "rx_typedrop : ftype=%d fstype=%d.\n", ftype, fstype);
1047 #endif
1048         switch ( ftype ) {
1049         case WLAN_FTYPE_MGMT:
1050                 if ((wlandev->netdev->flags & IFF_PROMISC) ||
1051                         (wlandev->netdev->flags & IFF_ALLMULTI)) {
1052                         drop = 1;
1053                         break;
1054                 }
1055                 WLAN_LOG_DEBUG(3, "rx'd mgmt:\n");
1056                 wlandev->rx.mgmt++;
1057                 switch( fstype ) {
1058                 case WLAN_FSTYPE_ASSOCREQ:
1059                         /* printk("assocreq"); */
1060                         wlandev->rx.assocreq++;
1061                         break;
1062                 case WLAN_FSTYPE_ASSOCRESP:
1063                         /* printk("assocresp"); */
1064                         wlandev->rx.assocresp++;
1065                         break;
1066                 case WLAN_FSTYPE_REASSOCREQ:
1067                         /* printk("reassocreq"); */
1068                         wlandev->rx.reassocreq++;
1069                         break;
1070                 case WLAN_FSTYPE_REASSOCRESP:
1071                         /* printk("reassocresp"); */
1072                         wlandev->rx.reassocresp++;
1073                         break;
1074                 case WLAN_FSTYPE_PROBEREQ:
1075                         /* printk("probereq"); */
1076                         wlandev->rx.probereq++;
1077                         break;
1078                 case WLAN_FSTYPE_PROBERESP:
1079                         /* printk("proberesp"); */
1080                         wlandev->rx.proberesp++;
1081                         break;
1082                 case WLAN_FSTYPE_BEACON:
1083                         /* printk("beacon"); */
1084                         wlandev->rx.beacon++;
1085                         break;
1086                 case WLAN_FSTYPE_ATIM:
1087                         /* printk("atim"); */
1088                         wlandev->rx.atim++;
1089                         break;
1090                 case WLAN_FSTYPE_DISASSOC:
1091                         /* printk("disassoc"); */
1092                         wlandev->rx.disassoc++;
1093                         break;
1094                 case WLAN_FSTYPE_AUTHEN:
1095                         /* printk("authen"); */
1096                         wlandev->rx.authen++;
1097                         break;
1098                 case WLAN_FSTYPE_DEAUTHEN:
1099                         /* printk("deauthen"); */
1100                         wlandev->rx.deauthen++;
1101                         break;
1102                 default:
1103                         /* printk("unknown"); */
1104                         wlandev->rx.mgmt_unknown++;
1105                         break;
1106                 }
1107                 /* printk("\n"); */
1108                 drop = 2;
1109                 break;
1110
1111         case WLAN_FTYPE_CTL:
1112                 if ((wlandev->netdev->flags & IFF_PROMISC) ||
1113                         (wlandev->netdev->flags & IFF_ALLMULTI)) {
1114                         drop = 1;
1115                         break;
1116                 }
1117                 WLAN_LOG_DEBUG(3, "rx'd ctl:\n");
1118                 wlandev->rx.ctl++;
1119                 switch( fstype ) {
1120                 case WLAN_FSTYPE_PSPOLL:
1121                         /* printk("pspoll"); */
1122                         wlandev->rx.pspoll++;
1123                         break;
1124                 case WLAN_FSTYPE_RTS:
1125                         /* printk("rts"); */
1126                         wlandev->rx.rts++;
1127                         break;
1128                 case WLAN_FSTYPE_CTS:
1129                         /* printk("cts"); */
1130                         wlandev->rx.cts++;
1131                         break;
1132                 case WLAN_FSTYPE_ACK:
1133                         /* printk("ack"); */
1134                         wlandev->rx.ack++;
1135                         break;
1136                 case WLAN_FSTYPE_CFEND:
1137                         /* printk("cfend"); */
1138                         wlandev->rx.cfend++;
1139                         break;
1140                 case WLAN_FSTYPE_CFENDCFACK:
1141                         /* printk("cfendcfack"); */
1142                         wlandev->rx.cfendcfack++;
1143                         break;
1144                 default:
1145                         /* printk("unknown"); */
1146                         wlandev->rx.ctl_unknown++;
1147                         break;
1148                 }
1149                 /* printk("\n"); */
1150                 drop = 2;
1151                 break;
1152
1153         case WLAN_FTYPE_DATA:
1154                 wlandev->rx.data++;
1155                 switch( fstype ) {
1156                 case WLAN_FSTYPE_DATAONLY:
1157                         wlandev->rx.dataonly++;
1158                         break;
1159                 case WLAN_FSTYPE_DATA_CFACK:
1160                         wlandev->rx.data_cfack++;
1161                         break;
1162                 case WLAN_FSTYPE_DATA_CFPOLL:
1163                         wlandev->rx.data_cfpoll++;
1164                         break;
1165                 case WLAN_FSTYPE_DATA_CFACK_CFPOLL:
1166                         wlandev->rx.data__cfack_cfpoll++;
1167                         break;
1168                 case WLAN_FSTYPE_NULL:
1169                         WLAN_LOG_DEBUG(3, "rx'd data:null\n");
1170                         wlandev->rx.null++;
1171                         break;
1172                 case WLAN_FSTYPE_CFACK:
1173                         WLAN_LOG_DEBUG(3, "rx'd data:cfack\n");
1174                         wlandev->rx.cfack++;
1175                         break;
1176                 case WLAN_FSTYPE_CFPOLL:
1177                         WLAN_LOG_DEBUG(3, "rx'd data:cfpoll\n");
1178                         wlandev->rx.cfpoll++;
1179                         break;
1180                 case WLAN_FSTYPE_CFACK_CFPOLL:
1181                         WLAN_LOG_DEBUG(3, "rx'd data:cfack_cfpoll\n");
1182                         wlandev->rx.cfack_cfpoll++;
1183                         break;
1184                 default:
1185                         /* printk("unknown"); */
1186                         wlandev->rx.data_unknown++;
1187                         break;
1188                 }
1189
1190                 break;
1191         }
1192         return drop;
1193 }
1194
1195 static void p80211knetdev_tx_timeout( netdevice_t *netdev)
1196 {
1197         wlandevice_t    *wlandev = netdev->ml_priv;
1198         DBFENTER;
1199
1200         if (wlandev->tx_timeout) {
1201                 wlandev->tx_timeout(wlandev);
1202         } else {
1203                 WLAN_LOG_WARNING("Implement tx_timeout for %s\n",
1204                                  wlandev->nsdname);
1205                 netif_wake_queue(wlandev->netdev);
1206         }
1207
1208         DBFEXIT;
1209 }