Merge branches 'topic/fix/asoc', 'topic/fix/hda', 'topic/fix/misc' and 'topic/pci...
[linux-2.6] / drivers / net / wireless / rtl8180_dev.c
1
2 /*
3  * Linux device driver for RTL8180 / RTL8185
4  *
5  * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
6  * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
7  *
8  * Based on the r8180 driver, which is:
9  * Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al.
10  *
11  * Thanks to Realtek for their support!
12  *
13  * This program is free software; you can redistribute it and/or modify
14  * it under the terms of the GNU General Public License version 2 as
15  * published by the Free Software Foundation.
16  */
17
18 #include <linux/init.h>
19 #include <linux/pci.h>
20 #include <linux/delay.h>
21 #include <linux/etherdevice.h>
22 #include <linux/eeprom_93cx6.h>
23 #include <net/mac80211.h>
24
25 #include "rtl8180.h"
26 #include "rtl8180_rtl8225.h"
27 #include "rtl8180_sa2400.h"
28 #include "rtl8180_max2820.h"
29 #include "rtl8180_grf5101.h"
30
31 MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
32 MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
33 MODULE_DESCRIPTION("RTL8180 / RTL8185 PCI wireless driver");
34 MODULE_LICENSE("GPL");
35
36 static struct pci_device_id rtl8180_table[] __devinitdata = {
37         /* rtl8185 */
38         { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8185) },
39         { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x700f) },
40         { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x701f) },
41
42         /* rtl8180 */
43         { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8180) },
44         { PCI_DEVICE(0x1799, 0x6001) },
45         { PCI_DEVICE(0x1799, 0x6020) },
46         { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x3300) },
47         { }
48 };
49
50 MODULE_DEVICE_TABLE(pci, rtl8180_table);
51
52 static const struct ieee80211_rate rtl818x_rates[] = {
53         { .bitrate = 10, .hw_value = 0, },
54         { .bitrate = 20, .hw_value = 1, },
55         { .bitrate = 55, .hw_value = 2, },
56         { .bitrate = 110, .hw_value = 3, },
57         { .bitrate = 60, .hw_value = 4, },
58         { .bitrate = 90, .hw_value = 5, },
59         { .bitrate = 120, .hw_value = 6, },
60         { .bitrate = 180, .hw_value = 7, },
61         { .bitrate = 240, .hw_value = 8, },
62         { .bitrate = 360, .hw_value = 9, },
63         { .bitrate = 480, .hw_value = 10, },
64         { .bitrate = 540, .hw_value = 11, },
65 };
66
67 static const struct ieee80211_channel rtl818x_channels[] = {
68         { .center_freq = 2412 },
69         { .center_freq = 2417 },
70         { .center_freq = 2422 },
71         { .center_freq = 2427 },
72         { .center_freq = 2432 },
73         { .center_freq = 2437 },
74         { .center_freq = 2442 },
75         { .center_freq = 2447 },
76         { .center_freq = 2452 },
77         { .center_freq = 2457 },
78         { .center_freq = 2462 },
79         { .center_freq = 2467 },
80         { .center_freq = 2472 },
81         { .center_freq = 2484 },
82 };
83
84
85
86
87 void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
88 {
89         struct rtl8180_priv *priv = dev->priv;
90         int i = 10;
91         u32 buf;
92
93         buf = (data << 8) | addr;
94
95         rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf | 0x80);
96         while (i--) {
97                 rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf);
98                 if (rtl818x_ioread8(priv, &priv->map->PHY[2]) == (data & 0xFF))
99                         return;
100         }
101 }
102
103 static void rtl8180_handle_rx(struct ieee80211_hw *dev)
104 {
105         struct rtl8180_priv *priv = dev->priv;
106         unsigned int count = 32;
107
108         while (count--) {
109                 struct rtl8180_rx_desc *entry = &priv->rx_ring[priv->rx_idx];
110                 struct sk_buff *skb = priv->rx_buf[priv->rx_idx];
111                 u32 flags = le32_to_cpu(entry->flags);
112
113                 if (flags & RTL818X_RX_DESC_FLAG_OWN)
114                         return;
115
116                 if (unlikely(flags & (RTL818X_RX_DESC_FLAG_DMA_FAIL |
117                                       RTL818X_RX_DESC_FLAG_FOF |
118                                       RTL818X_RX_DESC_FLAG_RX_ERR)))
119                         goto done;
120                 else {
121                         u32 flags2 = le32_to_cpu(entry->flags2);
122                         struct ieee80211_rx_status rx_status = {0};
123                         struct sk_buff *new_skb = dev_alloc_skb(MAX_RX_SIZE);
124
125                         if (unlikely(!new_skb))
126                                 goto done;
127
128                         pci_unmap_single(priv->pdev,
129                                          *((dma_addr_t *)skb->cb),
130                                          MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
131                         skb_put(skb, flags & 0xFFF);
132
133                         rx_status.antenna = (flags2 >> 15) & 1;
134                         /* TODO: improve signal/rssi reporting */
135                         rx_status.qual = flags2 & 0xFF;
136                         rx_status.signal = (flags2 >> 8) & 0x7F;
137                         /* XXX: is this correct? */
138                         rx_status.rate_idx = (flags >> 20) & 0xF;
139                         rx_status.freq = dev->conf.channel->center_freq;
140                         rx_status.band = dev->conf.channel->band;
141                         rx_status.mactime = le64_to_cpu(entry->tsft);
142                         rx_status.flag |= RX_FLAG_TSFT;
143                         if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
144                                 rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
145
146                         ieee80211_rx_irqsafe(dev, skb, &rx_status);
147
148                         skb = new_skb;
149                         priv->rx_buf[priv->rx_idx] = skb;
150                         *((dma_addr_t *) skb->cb) =
151                                 pci_map_single(priv->pdev, skb_tail_pointer(skb),
152                                                MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
153                 }
154
155         done:
156                 entry->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb));
157                 entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
158                                            MAX_RX_SIZE);
159                 if (priv->rx_idx == 31)
160                         entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
161                 priv->rx_idx = (priv->rx_idx + 1) % 32;
162         }
163 }
164
165 static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio)
166 {
167         struct rtl8180_priv *priv = dev->priv;
168         struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
169
170         while (skb_queue_len(&ring->queue)) {
171                 struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
172                 struct sk_buff *skb;
173                 struct ieee80211_tx_info *info;
174                 u32 flags = le32_to_cpu(entry->flags);
175
176                 if (flags & RTL818X_TX_DESC_FLAG_OWN)
177                         return;
178
179                 ring->idx = (ring->idx + 1) % ring->entries;
180                 skb = __skb_dequeue(&ring->queue);
181                 pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
182                                  skb->len, PCI_DMA_TODEVICE);
183
184                 info = IEEE80211_SKB_CB(skb);
185                 memset(&info->status, 0, sizeof(info->status));
186
187                 if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
188                         if (flags & RTL818X_TX_DESC_FLAG_TX_OK)
189                                 info->flags |= IEEE80211_TX_STAT_ACK;
190                         else
191                                 info->status.excessive_retries = 1;
192                 }
193                 info->status.retry_count = flags & 0xFF;
194
195                 ieee80211_tx_status_irqsafe(dev, skb);
196                 if (ring->entries - skb_queue_len(&ring->queue) == 2)
197                         ieee80211_wake_queue(dev, prio);
198         }
199 }
200
201 static irqreturn_t rtl8180_interrupt(int irq, void *dev_id)
202 {
203         struct ieee80211_hw *dev = dev_id;
204         struct rtl8180_priv *priv = dev->priv;
205         u16 reg;
206
207         spin_lock(&priv->lock);
208         reg = rtl818x_ioread16(priv, &priv->map->INT_STATUS);
209         if (unlikely(reg == 0xFFFF)) {
210                 spin_unlock(&priv->lock);
211                 return IRQ_HANDLED;
212         }
213
214         rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg);
215
216         if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR))
217                 rtl8180_handle_tx(dev, 3);
218
219         if (reg & (RTL818X_INT_TXH_OK | RTL818X_INT_TXH_ERR))
220                 rtl8180_handle_tx(dev, 2);
221
222         if (reg & (RTL818X_INT_TXN_OK | RTL818X_INT_TXN_ERR))
223                 rtl8180_handle_tx(dev, 1);
224
225         if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR))
226                 rtl8180_handle_tx(dev, 0);
227
228         if (reg & (RTL818X_INT_RX_OK | RTL818X_INT_RX_ERR))
229                 rtl8180_handle_rx(dev);
230
231         spin_unlock(&priv->lock);
232
233         return IRQ_HANDLED;
234 }
235
236 static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
237 {
238         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
239         struct rtl8180_priv *priv = dev->priv;
240         struct rtl8180_tx_ring *ring;
241         struct rtl8180_tx_desc *entry;
242         unsigned long flags;
243         unsigned int idx, prio;
244         dma_addr_t mapping;
245         u32 tx_flags;
246         u16 plcp_len = 0;
247         __le16 rts_duration = 0;
248
249         prio = skb_get_queue_mapping(skb);
250         ring = &priv->tx_ring[prio];
251
252         mapping = pci_map_single(priv->pdev, skb->data,
253                                  skb->len, PCI_DMA_TODEVICE);
254
255         tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS |
256                    RTL818X_TX_DESC_FLAG_LS |
257                    (ieee80211_get_tx_rate(dev, info)->hw_value << 24) |
258                    skb->len;
259
260         if (priv->r8185)
261                 tx_flags |= RTL818X_TX_DESC_FLAG_DMA |
262                             RTL818X_TX_DESC_FLAG_NO_ENC;
263
264         if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
265                 tx_flags |= RTL818X_TX_DESC_FLAG_RTS;
266                 tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
267         } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
268                 tx_flags |= RTL818X_TX_DESC_FLAG_CTS;
269                 tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
270         }
271
272         if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
273                 rts_duration = ieee80211_rts_duration(dev, priv->vif, skb->len,
274                                                       info);
275
276         if (!priv->r8185) {
277                 unsigned int remainder;
278
279                 plcp_len = DIV_ROUND_UP(16 * (skb->len + 4),
280                                 (ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10);
281                 remainder = (16 * (skb->len + 4)) %
282                             ((ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10);
283                 if (remainder > 0 && remainder <= 6)
284                         plcp_len |= 1 << 15;
285         }
286
287         spin_lock_irqsave(&priv->lock, flags);
288         idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries;
289         entry = &ring->desc[idx];
290
291         entry->rts_duration = rts_duration;
292         entry->plcp_len = cpu_to_le16(plcp_len);
293         entry->tx_buf = cpu_to_le32(mapping);
294         entry->frame_len = cpu_to_le32(skb->len);
295         entry->flags2 = info->control.retries[0].rate_idx >= 0 ?
296                 ieee80211_get_alt_retry_rate(dev, info, 0)->bitrate << 4 : 0;
297         entry->retry_limit = info->control.retry_limit;
298         entry->flags = cpu_to_le32(tx_flags);
299         __skb_queue_tail(&ring->queue, skb);
300         if (ring->entries - skb_queue_len(&ring->queue) < 2)
301                 ieee80211_stop_queue(dev, skb_get_queue_mapping(skb));
302         spin_unlock_irqrestore(&priv->lock, flags);
303
304         rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << (prio + 4)));
305
306         return 0;
307 }
308
309 void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
310 {
311         u8 reg;
312
313         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
314         reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
315         rtl818x_iowrite8(priv, &priv->map->CONFIG3,
316                  reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
317         rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam);
318         rtl818x_iowrite8(priv, &priv->map->CONFIG3,
319                  reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
320         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
321 }
322
323 static int rtl8180_init_hw(struct ieee80211_hw *dev)
324 {
325         struct rtl8180_priv *priv = dev->priv;
326         u16 reg;
327
328         rtl818x_iowrite8(priv, &priv->map->CMD, 0);
329         rtl818x_ioread8(priv, &priv->map->CMD);
330         msleep(10);
331
332         /* reset */
333         rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
334         rtl818x_ioread8(priv, &priv->map->CMD);
335
336         reg = rtl818x_ioread8(priv, &priv->map->CMD);
337         reg &= (1 << 1);
338         reg |= RTL818X_CMD_RESET;
339         rtl818x_iowrite8(priv, &priv->map->CMD, RTL818X_CMD_RESET);
340         rtl818x_ioread8(priv, &priv->map->CMD);
341         msleep(200);
342
343         /* check success of reset */
344         if (rtl818x_ioread8(priv, &priv->map->CMD) & RTL818X_CMD_RESET) {
345                 printk(KERN_ERR "%s: reset timeout!\n", wiphy_name(dev->wiphy));
346                 return -ETIMEDOUT;
347         }
348
349         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
350         rtl818x_ioread8(priv, &priv->map->CMD);
351         msleep(200);
352
353         if (rtl818x_ioread8(priv, &priv->map->CONFIG3) & (1 << 3)) {
354                 /* For cardbus */
355                 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
356                 reg |= 1 << 1;
357                 rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
358                 reg = rtl818x_ioread16(priv, &priv->map->FEMR);
359                 reg |= (1 << 15) | (1 << 14) | (1 << 4);
360                 rtl818x_iowrite16(priv, &priv->map->FEMR, reg);
361         }
362
363         rtl818x_iowrite8(priv, &priv->map->MSR, 0);
364
365         if (!priv->r8185)
366                 rtl8180_set_anaparam(priv, priv->anaparam);
367
368         rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
369         rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma);
370         rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma);
371         rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma);
372         rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
373
374         /* TODO: necessary? specs indicate not */
375         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
376         reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
377         rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg & ~(1 << 3));
378         if (priv->r8185) {
379                 reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
380                 rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg | (1 << 4));
381         }
382         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
383
384         /* TODO: set CONFIG5 for calibrating AGC on rtl8180 + philips radio? */
385
386         /* TODO: turn off hw wep on rtl8180 */
387
388         rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
389
390         if (priv->r8185) {
391                 rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
392                 rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
393                 rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
394
395                 rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
396
397                 /* TODO: set ClkRun enable? necessary? */
398                 reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE);
399                 rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, reg & ~(1 << 6));
400                 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
401                 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
402                 rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2));
403                 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
404         } else {
405                 rtl818x_iowrite16(priv, &priv->map->BRSR, 0x1);
406                 rtl818x_iowrite8(priv, &priv->map->SECURITY, 0);
407
408                 rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6);
409                 rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C);
410         }
411
412         priv->rf->init(dev);
413         if (priv->r8185)
414                 rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
415         return 0;
416 }
417
418 static int rtl8180_init_rx_ring(struct ieee80211_hw *dev)
419 {
420         struct rtl8180_priv *priv = dev->priv;
421         struct rtl8180_rx_desc *entry;
422         int i;
423
424         priv->rx_ring = pci_alloc_consistent(priv->pdev,
425                                              sizeof(*priv->rx_ring) * 32,
426                                              &priv->rx_ring_dma);
427
428         if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) {
429                 printk(KERN_ERR "%s: Cannot allocate RX ring\n",
430                        wiphy_name(dev->wiphy));
431                 return -ENOMEM;
432         }
433
434         memset(priv->rx_ring, 0, sizeof(*priv->rx_ring) * 32);
435         priv->rx_idx = 0;
436
437         for (i = 0; i < 32; i++) {
438                 struct sk_buff *skb = dev_alloc_skb(MAX_RX_SIZE);
439                 dma_addr_t *mapping;
440                 entry = &priv->rx_ring[i];
441                 if (!skb)
442                         return 0;
443
444                 priv->rx_buf[i] = skb;
445                 mapping = (dma_addr_t *)skb->cb;
446                 *mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb),
447                                           MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
448                 entry->rx_buf = cpu_to_le32(*mapping);
449                 entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
450                                            MAX_RX_SIZE);
451         }
452         entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
453         return 0;
454 }
455
456 static void rtl8180_free_rx_ring(struct ieee80211_hw *dev)
457 {
458         struct rtl8180_priv *priv = dev->priv;
459         int i;
460
461         for (i = 0; i < 32; i++) {
462                 struct sk_buff *skb = priv->rx_buf[i];
463                 if (!skb)
464                         continue;
465
466                 pci_unmap_single(priv->pdev,
467                                  *((dma_addr_t *)skb->cb),
468                                  MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
469                 kfree_skb(skb);
470         }
471
472         pci_free_consistent(priv->pdev, sizeof(*priv->rx_ring) * 32,
473                             priv->rx_ring, priv->rx_ring_dma);
474         priv->rx_ring = NULL;
475 }
476
477 static int rtl8180_init_tx_ring(struct ieee80211_hw *dev,
478                                 unsigned int prio, unsigned int entries)
479 {
480         struct rtl8180_priv *priv = dev->priv;
481         struct rtl8180_tx_desc *ring;
482         dma_addr_t dma;
483         int i;
484
485         ring = pci_alloc_consistent(priv->pdev, sizeof(*ring) * entries, &dma);
486         if (!ring || (unsigned long)ring & 0xFF) {
487                 printk(KERN_ERR "%s: Cannot allocate TX ring (prio = %d)\n",
488                        wiphy_name(dev->wiphy), prio);
489                 return -ENOMEM;
490         }
491
492         memset(ring, 0, sizeof(*ring)*entries);
493         priv->tx_ring[prio].desc = ring;
494         priv->tx_ring[prio].dma = dma;
495         priv->tx_ring[prio].idx = 0;
496         priv->tx_ring[prio].entries = entries;
497         skb_queue_head_init(&priv->tx_ring[prio].queue);
498
499         for (i = 0; i < entries; i++)
500                 ring[i].next_tx_desc =
501                         cpu_to_le32((u32)dma + ((i + 1) % entries) * sizeof(*ring));
502
503         return 0;
504 }
505
506 static void rtl8180_free_tx_ring(struct ieee80211_hw *dev, unsigned int prio)
507 {
508         struct rtl8180_priv *priv = dev->priv;
509         struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
510
511         while (skb_queue_len(&ring->queue)) {
512                 struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
513                 struct sk_buff *skb = __skb_dequeue(&ring->queue);
514
515                 pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
516                                  skb->len, PCI_DMA_TODEVICE);
517                 kfree_skb(skb);
518                 ring->idx = (ring->idx + 1) % ring->entries;
519         }
520
521         pci_free_consistent(priv->pdev, sizeof(*ring->desc)*ring->entries,
522                             ring->desc, ring->dma);
523         ring->desc = NULL;
524 }
525
526 static int rtl8180_start(struct ieee80211_hw *dev)
527 {
528         struct rtl8180_priv *priv = dev->priv;
529         int ret, i;
530         u32 reg;
531
532         ret = rtl8180_init_rx_ring(dev);
533         if (ret)
534                 return ret;
535
536         for (i = 0; i < 4; i++)
537                 if ((ret = rtl8180_init_tx_ring(dev, i, 16)))
538                         goto err_free_rings;
539
540         ret = rtl8180_init_hw(dev);
541         if (ret)
542                 goto err_free_rings;
543
544         rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
545         rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma);
546         rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma);
547         rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma);
548         rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
549
550         ret = request_irq(priv->pdev->irq, &rtl8180_interrupt,
551                           IRQF_SHARED, KBUILD_MODNAME, dev);
552         if (ret) {
553                 printk(KERN_ERR "%s: failed to register IRQ handler\n",
554                        wiphy_name(dev->wiphy));
555                 goto err_free_rings;
556         }
557
558         rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
559
560         rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
561         rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
562
563         reg = RTL818X_RX_CONF_ONLYERLPKT |
564               RTL818X_RX_CONF_RX_AUTORESETPHY |
565               RTL818X_RX_CONF_MGMT |
566               RTL818X_RX_CONF_DATA |
567               (7 << 8 /* MAX RX DMA */) |
568               RTL818X_RX_CONF_BROADCAST |
569               RTL818X_RX_CONF_NICMAC;
570
571         if (priv->r8185)
572                 reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2;
573         else {
574                 reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1)
575                         ? RTL818X_RX_CONF_CSDM1 : 0;
576                 reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE2)
577                         ? RTL818X_RX_CONF_CSDM2 : 0;
578         }
579
580         priv->rx_conf = reg;
581         rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
582
583         if (priv->r8185) {
584                 reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
585                 reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
586                 reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
587                 rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
588
589                 reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
590                 reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
591                 reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
592                 reg |=  RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
593                 rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
594
595                 /* disable early TX */
596                 rtl818x_iowrite8(priv, (u8 __iomem *)priv->map + 0xec, 0x3f);
597         }
598
599         reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
600         reg |= (6 << 21 /* MAX TX DMA */) |
601                RTL818X_TX_CONF_NO_ICV;
602
603         if (priv->r8185)
604                 reg &= ~RTL818X_TX_CONF_PROBE_DTS;
605         else
606                 reg &= ~RTL818X_TX_CONF_HW_SEQNUM;
607
608         /* different meaning, same value on both rtl8185 and rtl8180 */
609         reg &= ~RTL818X_TX_CONF_SAT_HWPLCP;
610
611         rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
612
613         reg = rtl818x_ioread8(priv, &priv->map->CMD);
614         reg |= RTL818X_CMD_RX_ENABLE;
615         reg |= RTL818X_CMD_TX_ENABLE;
616         rtl818x_iowrite8(priv, &priv->map->CMD, reg);
617
618         priv->mode = NL80211_IFTYPE_MONITOR;
619         return 0;
620
621  err_free_rings:
622         rtl8180_free_rx_ring(dev);
623         for (i = 0; i < 4; i++)
624                 if (priv->tx_ring[i].desc)
625                         rtl8180_free_tx_ring(dev, i);
626
627         return ret;
628 }
629
630 static void rtl8180_stop(struct ieee80211_hw *dev)
631 {
632         struct rtl8180_priv *priv = dev->priv;
633         u8 reg;
634         int i;
635
636         priv->mode = NL80211_IFTYPE_UNSPECIFIED;
637
638         rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
639
640         reg = rtl818x_ioread8(priv, &priv->map->CMD);
641         reg &= ~RTL818X_CMD_TX_ENABLE;
642         reg &= ~RTL818X_CMD_RX_ENABLE;
643         rtl818x_iowrite8(priv, &priv->map->CMD, reg);
644
645         priv->rf->stop(dev);
646
647         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
648         reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
649         rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
650         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
651
652         free_irq(priv->pdev->irq, dev);
653
654         rtl8180_free_rx_ring(dev);
655         for (i = 0; i < 4; i++)
656                 rtl8180_free_tx_ring(dev, i);
657 }
658
659 static int rtl8180_add_interface(struct ieee80211_hw *dev,
660                                  struct ieee80211_if_init_conf *conf)
661 {
662         struct rtl8180_priv *priv = dev->priv;
663
664         if (priv->mode != NL80211_IFTYPE_MONITOR)
665                 return -EOPNOTSUPP;
666
667         switch (conf->type) {
668         case NL80211_IFTYPE_STATION:
669                 priv->mode = conf->type;
670                 break;
671         default:
672                 return -EOPNOTSUPP;
673         }
674
675         priv->vif = conf->vif;
676
677         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
678         rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0],
679                           le32_to_cpu(*(__le32 *)conf->mac_addr));
680         rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->MAC[4],
681                           le16_to_cpu(*(__le16 *)(conf->mac_addr + 4)));
682         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
683
684         return 0;
685 }
686
687 static void rtl8180_remove_interface(struct ieee80211_hw *dev,
688                                      struct ieee80211_if_init_conf *conf)
689 {
690         struct rtl8180_priv *priv = dev->priv;
691         priv->mode = NL80211_IFTYPE_MONITOR;
692         priv->vif = NULL;
693 }
694
695 static int rtl8180_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
696 {
697         struct rtl8180_priv *priv = dev->priv;
698
699         priv->rf->set_chan(dev, conf);
700
701         return 0;
702 }
703
704 static int rtl8180_config_interface(struct ieee80211_hw *dev,
705                                     struct ieee80211_vif *vif,
706                                     struct ieee80211_if_conf *conf)
707 {
708         struct rtl8180_priv *priv = dev->priv;
709         int i;
710
711         for (i = 0; i < ETH_ALEN; i++)
712                 rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
713
714         if (is_valid_ether_addr(conf->bssid))
715                 rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA);
716         else
717                 rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK);
718
719         return 0;
720 }
721
722 static void rtl8180_configure_filter(struct ieee80211_hw *dev,
723                                      unsigned int changed_flags,
724                                      unsigned int *total_flags,
725                                      int mc_count, struct dev_addr_list *mclist)
726 {
727         struct rtl8180_priv *priv = dev->priv;
728
729         if (changed_flags & FIF_FCSFAIL)
730                 priv->rx_conf ^= RTL818X_RX_CONF_FCS;
731         if (changed_flags & FIF_CONTROL)
732                 priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
733         if (changed_flags & FIF_OTHER_BSS)
734                 priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
735         if (*total_flags & FIF_ALLMULTI || mc_count > 0)
736                 priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
737         else
738                 priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
739
740         *total_flags = 0;
741
742         if (priv->rx_conf & RTL818X_RX_CONF_FCS)
743                 *total_flags |= FIF_FCSFAIL;
744         if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
745                 *total_flags |= FIF_CONTROL;
746         if (priv->rx_conf & RTL818X_RX_CONF_MONITOR)
747                 *total_flags |= FIF_OTHER_BSS;
748         if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
749                 *total_flags |= FIF_ALLMULTI;
750
751         rtl818x_iowrite32(priv, &priv->map->RX_CONF, priv->rx_conf);
752 }
753
754 static const struct ieee80211_ops rtl8180_ops = {
755         .tx                     = rtl8180_tx,
756         .start                  = rtl8180_start,
757         .stop                   = rtl8180_stop,
758         .add_interface          = rtl8180_add_interface,
759         .remove_interface       = rtl8180_remove_interface,
760         .config                 = rtl8180_config,
761         .config_interface       = rtl8180_config_interface,
762         .configure_filter       = rtl8180_configure_filter,
763 };
764
765 static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom)
766 {
767         struct ieee80211_hw *dev = eeprom->data;
768         struct rtl8180_priv *priv = dev->priv;
769         u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
770
771         eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
772         eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
773         eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
774         eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
775 }
776
777 static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom)
778 {
779         struct ieee80211_hw *dev = eeprom->data;
780         struct rtl8180_priv *priv = dev->priv;
781         u8 reg = 2 << 6;
782
783         if (eeprom->reg_data_in)
784                 reg |= RTL818X_EEPROM_CMD_WRITE;
785         if (eeprom->reg_data_out)
786                 reg |= RTL818X_EEPROM_CMD_READ;
787         if (eeprom->reg_data_clock)
788                 reg |= RTL818X_EEPROM_CMD_CK;
789         if (eeprom->reg_chip_select)
790                 reg |= RTL818X_EEPROM_CMD_CS;
791
792         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
793         rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
794         udelay(10);
795 }
796
797 static int __devinit rtl8180_probe(struct pci_dev *pdev,
798                                    const struct pci_device_id *id)
799 {
800         struct ieee80211_hw *dev;
801         struct rtl8180_priv *priv;
802         unsigned long mem_addr, mem_len;
803         unsigned int io_addr, io_len;
804         int err, i;
805         struct eeprom_93cx6 eeprom;
806         const char *chip_name, *rf_name = NULL;
807         u32 reg;
808         u16 eeprom_val;
809         DECLARE_MAC_BUF(mac);
810
811         err = pci_enable_device(pdev);
812         if (err) {
813                 printk(KERN_ERR "%s (rtl8180): Cannot enable new PCI device\n",
814                        pci_name(pdev));
815                 return err;
816         }
817
818         err = pci_request_regions(pdev, KBUILD_MODNAME);
819         if (err) {
820                 printk(KERN_ERR "%s (rtl8180): Cannot obtain PCI resources\n",
821                        pci_name(pdev));
822                 return err;
823         }
824
825         io_addr = pci_resource_start(pdev, 0);
826         io_len = pci_resource_len(pdev, 0);
827         mem_addr = pci_resource_start(pdev, 1);
828         mem_len = pci_resource_len(pdev, 1);
829
830         if (mem_len < sizeof(struct rtl818x_csr) ||
831             io_len < sizeof(struct rtl818x_csr)) {
832                 printk(KERN_ERR "%s (rtl8180): Too short PCI resources\n",
833                        pci_name(pdev));
834                 err = -ENOMEM;
835                 goto err_free_reg;
836         }
837
838         if ((err = pci_set_dma_mask(pdev, 0xFFFFFF00ULL)) ||
839             (err = pci_set_consistent_dma_mask(pdev, 0xFFFFFF00ULL))) {
840                 printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n",
841                        pci_name(pdev));
842                 goto err_free_reg;
843         }
844
845         pci_set_master(pdev);
846
847         dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8180_ops);
848         if (!dev) {
849                 printk(KERN_ERR "%s (rtl8180): ieee80211 alloc failed\n",
850                        pci_name(pdev));
851                 err = -ENOMEM;
852                 goto err_free_reg;
853         }
854
855         priv = dev->priv;
856         priv->pdev = pdev;
857
858         dev->max_altrates = 1;
859         SET_IEEE80211_DEV(dev, &pdev->dev);
860         pci_set_drvdata(pdev, dev);
861
862         priv->map = pci_iomap(pdev, 1, mem_len);
863         if (!priv->map)
864                 priv->map = pci_iomap(pdev, 0, io_len);
865
866         if (!priv->map) {
867                 printk(KERN_ERR "%s (rtl8180): Cannot map device memory\n",
868                        pci_name(pdev));
869                 goto err_free_dev;
870         }
871
872         BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels));
873         BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates));
874
875         memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
876         memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
877
878         priv->band.band = IEEE80211_BAND_2GHZ;
879         priv->band.channels = priv->channels;
880         priv->band.n_channels = ARRAY_SIZE(rtl818x_channels);
881         priv->band.bitrates = priv->rates;
882         priv->band.n_bitrates = 4;
883         dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
884
885         dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
886                      IEEE80211_HW_RX_INCLUDES_FCS |
887                      IEEE80211_HW_SIGNAL_UNSPEC;
888         dev->queues = 1;
889         dev->max_signal = 65;
890
891         reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
892         reg &= RTL818X_TX_CONF_HWVER_MASK;
893         switch (reg) {
894         case RTL818X_TX_CONF_R8180_ABCD:
895                 chip_name = "RTL8180";
896                 break;
897         case RTL818X_TX_CONF_R8180_F:
898                 chip_name = "RTL8180vF";
899                 break;
900         case RTL818X_TX_CONF_R8185_ABC:
901                 chip_name = "RTL8185";
902                 break;
903         case RTL818X_TX_CONF_R8185_D:
904                 chip_name = "RTL8185vD";
905                 break;
906         default:
907                 printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n",
908                        pci_name(pdev), reg >> 25);
909                 goto err_iounmap;
910         }
911
912         priv->r8185 = reg & RTL818X_TX_CONF_R8185_ABC;
913         if (priv->r8185) {
914                 priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
915                 pci_try_set_mwi(pdev);
916         }
917
918         eeprom.data = dev;
919         eeprom.register_read = rtl8180_eeprom_register_read;
920         eeprom.register_write = rtl8180_eeprom_register_write;
921         if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
922                 eeprom.width = PCI_EEPROM_WIDTH_93C66;
923         else
924                 eeprom.width = PCI_EEPROM_WIDTH_93C46;
925
926         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_PROGRAM);
927         rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
928         udelay(10);
929
930         eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val);
931         eeprom_val &= 0xFF;
932         switch (eeprom_val) {
933         case 1: rf_name = "Intersil";
934                 break;
935         case 2: rf_name = "RFMD";
936                 break;
937         case 3: priv->rf = &sa2400_rf_ops;
938                 break;
939         case 4: priv->rf = &max2820_rf_ops;
940                 break;
941         case 5: priv->rf = &grf5101_rf_ops;
942                 break;
943         case 9: priv->rf = rtl8180_detect_rf(dev);
944                 break;
945         case 10:
946                 rf_name = "RTL8255";
947                 break;
948         default:
949                 printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n",
950                        pci_name(pdev), eeprom_val);
951                 goto err_iounmap;
952         }
953
954         if (!priv->rf) {
955                 printk(KERN_ERR "%s (rtl8180): %s RF frontend not supported!\n",
956                        pci_name(pdev), rf_name);
957                 goto err_iounmap;
958         }
959
960         eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val);
961         priv->csthreshold = eeprom_val >> 8;
962         if (!priv->r8185) {
963                 __le32 anaparam;
964                 eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2);
965                 priv->anaparam = le32_to_cpu(anaparam);
966                 eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam);
967         }
968
969         eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)dev->wiphy->perm_addr, 3);
970         if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
971                 printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using"
972                        " randomly generated MAC addr\n", pci_name(pdev));
973                 random_ether_addr(dev->wiphy->perm_addr);
974         }
975
976         /* CCK TX power */
977         for (i = 0; i < 14; i += 2) {
978                 u16 txpwr;
979                 eeprom_93cx6_read(&eeprom, 0x10 + (i >> 1), &txpwr);
980                 priv->channels[i].hw_value = txpwr & 0xFF;
981                 priv->channels[i + 1].hw_value = txpwr >> 8;
982         }
983
984         /* OFDM TX power */
985         if (priv->r8185) {
986                 for (i = 0; i < 14; i += 2) {
987                         u16 txpwr;
988                         eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr);
989                         priv->channels[i].hw_value |= (txpwr & 0xFF) << 8;
990                         priv->channels[i + 1].hw_value |= txpwr & 0xFF00;
991                 }
992         }
993
994         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
995
996         spin_lock_init(&priv->lock);
997
998         err = ieee80211_register_hw(dev);
999         if (err) {
1000                 printk(KERN_ERR "%s (rtl8180): Cannot register device\n",
1001                        pci_name(pdev));
1002                 goto err_iounmap;
1003         }
1004
1005         printk(KERN_INFO "%s: hwaddr %s, %s + %s\n",
1006                wiphy_name(dev->wiphy), print_mac(mac, dev->wiphy->perm_addr),
1007                chip_name, priv->rf->name);
1008
1009         return 0;
1010
1011  err_iounmap:
1012         iounmap(priv->map);
1013
1014  err_free_dev:
1015         pci_set_drvdata(pdev, NULL);
1016         ieee80211_free_hw(dev);
1017
1018  err_free_reg:
1019         pci_release_regions(pdev);
1020         pci_disable_device(pdev);
1021         return err;
1022 }
1023
1024 static void __devexit rtl8180_remove(struct pci_dev *pdev)
1025 {
1026         struct ieee80211_hw *dev = pci_get_drvdata(pdev);
1027         struct rtl8180_priv *priv;
1028
1029         if (!dev)
1030                 return;
1031
1032         ieee80211_unregister_hw(dev);
1033
1034         priv = dev->priv;
1035
1036         pci_iounmap(pdev, priv->map);
1037         pci_release_regions(pdev);
1038         pci_disable_device(pdev);
1039         ieee80211_free_hw(dev);
1040 }
1041
1042 #ifdef CONFIG_PM
1043 static int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state)
1044 {
1045         pci_save_state(pdev);
1046         pci_set_power_state(pdev, pci_choose_state(pdev, state));
1047         return 0;
1048 }
1049
1050 static int rtl8180_resume(struct pci_dev *pdev)
1051 {
1052         pci_set_power_state(pdev, PCI_D0);
1053         pci_restore_state(pdev);
1054         return 0;
1055 }
1056
1057 #endif /* CONFIG_PM */
1058
1059 static struct pci_driver rtl8180_driver = {
1060         .name           = KBUILD_MODNAME,
1061         .id_table       = rtl8180_table,
1062         .probe          = rtl8180_probe,
1063         .remove         = __devexit_p(rtl8180_remove),
1064 #ifdef CONFIG_PM
1065         .suspend        = rtl8180_suspend,
1066         .resume         = rtl8180_resume,
1067 #endif /* CONFIG_PM */
1068 };
1069
1070 static int __init rtl8180_init(void)
1071 {
1072         return pci_register_driver(&rtl8180_driver);
1073 }
1074
1075 static void __exit rtl8180_exit(void)
1076 {
1077         pci_unregister_driver(&rtl8180_driver);
1078 }
1079
1080 module_init(rtl8180_init);
1081 module_exit(rtl8180_exit);