2 * The low performance USB storage driver (ub).
4 * Copyright (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
5 * Copyright (C) 2004 Pete Zaitcev (zaitcev@yahoo.com)
7 * This work is a part of Linux kernel, is derived from it,
8 * and is not licensed separately. See file COPYING for details.
10 * TODO (sorted by decreasing priority)
11 * -- Kill first_open (Al Viro fixed the block layer now)
12 * -- set readonly flag for CDs, set removable flag for CF readers
13 * -- do inquiry and verify we got a disk and not a tape (for LUN mismatch)
14 * -- special case some senses, e.g. 3a/0 -> no media present, reduce retries
15 * -- verify the 13 conditions and do bulk resets
16 * -- kill last_pipe and simply do two-state clearing on both pipes
18 * -- move top_sense and work_bcs into separate allocations (if they survive)
19 * for cache purists and esoteric architectures.
20 * -- Allocate structure for LUN 0 before the first ub_sync_tur, avoid NULL. ?
21 * -- prune comments, they are too volumnous
22 * -- Exterminate P3 printks
24 * -- Redo "benh's retries", perhaps have spin-up code to handle them. V:D=?
25 * -- CLEAR, CLR2STS, CLRRS seem to be ripe for refactoring.
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/usb.h>
30 #include <linux/usb_usual.h>
31 #include <linux/blkdev.h>
32 #include <linux/devfs_fs_kernel.h>
33 #include <linux/timer.h>
34 #include <scsi/scsi.h>
37 #define DEVFS_NAME DRV_NAME
42 * The command state machine is the key model for understanding of this driver.
44 * The general rule is that all transitions are done towards the bottom
45 * of the diagram, thus preventing any loops.
47 * An exception to that is how the STAT state is handled. A counter allows it
48 * to be re-entered along the path marked with [C].
54 * ub_scsi_cmd_start fails ->--------------------------------------\
61 * was -EPIPE -->-------------------------------->! CLEAR ! !
64 * was error -->------------------------------------- ! --------->\
66 * /--<-- cmd->dir == NONE ? ! !
73 * ! was -EPIPE -->--------------->! CLR2STS ! ! !
76 * ! ! was error -->---- ! --------->\
77 * ! was error -->--------------------- ! ------------- ! --------->\
80 * \--->+--------+ ! ! !
81 * ! STAT !<--------------------------/ ! !
84 * [C] was -EPIPE -->-----------\ ! !
86 * +<---- len == 0 ! ! !
88 * ! was error -->--------------------------------------!---------->\
90 * +<---- bad CSW ! ! !
91 * +<---- bad tag ! ! !
97 * \------- ! --------------------[C]--------\ ! !
99 * cmd->error---\ +--------+ ! !
100 * ! +--------------->! SENSE !<----------/ !
101 * STAT_FAIL----/ +--------+ !
104 * \--------------------------------\--------------------->! DONE !
109 * This many LUNs per USB device.
110 * Every one of them takes a host, see UB_MAX_HOSTS.
112 #define UB_MAX_LUNS 9
117 #define UB_PARTS_PER_LUN 8
119 #define UB_MAX_CDB_SIZE 16 /* Corresponds to Bulk */
121 #define UB_SENSE_SIZE 18
126 /* command block wrapper */
127 struct bulk_cb_wrap {
128 __le32 Signature; /* contains 'USBC' */
129 u32 Tag; /* unique per command id */
130 __le32 DataTransferLength; /* size of data */
131 u8 Flags; /* direction in bit 0 */
133 u8 Length; /* of of the CDB */
134 u8 CDB[UB_MAX_CDB_SIZE]; /* max command */
137 #define US_BULK_CB_WRAP_LEN 31
138 #define US_BULK_CB_SIGN 0x43425355 /*spells out USBC */
139 #define US_BULK_FLAG_IN 1
140 #define US_BULK_FLAG_OUT 0
142 /* command status wrapper */
143 struct bulk_cs_wrap {
144 __le32 Signature; /* should = 'USBS' */
145 u32 Tag; /* same as original command */
146 __le32 Residue; /* amount not transferred */
147 u8 Status; /* see below */
150 #define US_BULK_CS_WRAP_LEN 13
151 #define US_BULK_CS_SIGN 0x53425355 /* spells out 'USBS' */
152 #define US_BULK_STAT_OK 0
153 #define US_BULK_STAT_FAIL 1
154 #define US_BULK_STAT_PHASE 2
156 /* bulk-only class specific requests */
157 #define US_BULK_RESET_REQUEST 0xff
158 #define US_BULK_GET_MAX_LUN 0xfe
164 #define UB_MAX_REQ_SG 9 /* cdrecord requires 32KB and maybe a header */
165 #define UB_MAX_SECTORS 64
168 * A second is more than enough for a 32K transfer (UB_MAX_SECTORS)
169 * even if a webcam hogs the bus, but some devices need time to spin up.
171 #define UB_URB_TIMEOUT (HZ*2)
172 #define UB_DATA_TIMEOUT (HZ*5) /* ZIP does spin-ups in the data phase */
173 #define UB_STAT_TIMEOUT (HZ*5) /* Same spinups and eject for a dataless cmd. */
174 #define UB_CTRL_TIMEOUT (HZ/2) /* 500ms ought to be enough to clear a stall */
177 * An instance of a SCSI command in transit.
179 #define UB_DIR_NONE 0
180 #define UB_DIR_READ 1
181 #define UB_DIR_ILLEGAL2 2
182 #define UB_DIR_WRITE 3
184 #define UB_DIR_CHAR(c) (((c)==UB_DIR_WRITE)? 'w': \
185 (((c)==UB_DIR_READ)? 'r': 'n'))
187 enum ub_scsi_cmd_state {
188 UB_CMDST_INIT, /* Initial state */
189 UB_CMDST_CMD, /* Command submitted */
190 UB_CMDST_DATA, /* Data phase */
191 UB_CMDST_CLR2STS, /* Clearing before requesting status */
192 UB_CMDST_STAT, /* Status phase */
193 UB_CMDST_CLEAR, /* Clearing a stall (halt, actually) */
194 UB_CMDST_CLRRS, /* Clearing before retrying status */
195 UB_CMDST_SENSE, /* Sending Request Sense */
196 UB_CMDST_DONE /* Final state */
199 static char *ub_scsi_cmd_stname[] = {
212 unsigned char cdb[UB_MAX_CDB_SIZE];
213 unsigned char cdb_len;
215 unsigned char dir; /* 0 - none, 1 - read, 3 - write. */
216 unsigned char trace_index;
217 enum ub_scsi_cmd_state state;
219 struct ub_scsi_cmd *next;
221 int error; /* Return code - valid upon done */
222 unsigned int act_len; /* Return size */
223 unsigned char key, asc, ascq; /* May be valid if error==-EIO */
225 int stat_count; /* Retries getting status. */
227 unsigned int len; /* Requested length */
228 unsigned int current_sg;
229 unsigned int nsg; /* sgv[nsg] */
230 struct scatterlist sgv[UB_MAX_REQ_SG];
233 void (*done)(struct ub_dev *, struct ub_scsi_cmd *);
239 unsigned int current_try;
240 unsigned int nsg; /* sgv[nsg] */
241 struct scatterlist sgv[UB_MAX_REQ_SG];
247 unsigned long nsec; /* Linux size - 512 byte sectors */
248 unsigned int bsize; /* Linux hardsect_size */
249 unsigned int bshift; /* Shift between 512 and hard sects */
253 * The SCSI command tracing structure.
256 #define SCMD_ST_HIST_SZ 8
257 #define SCMD_TRACE_SZ 63 /* Less than 4KB of 61-byte lines */
259 struct ub_scsi_cmd_trace {
262 unsigned int req_size, act_size;
265 unsigned char key, asc, ascq;
266 char st_hst[SCMD_ST_HIST_SZ];
269 struct ub_scsi_trace {
271 struct ub_scsi_cmd_trace vec[SCMD_TRACE_SZ];
275 * This is a direct take-off from linux/include/completion.h
276 * The difference is that I do not wait on this thing, just poll.
277 * When I want to wait (ub_probe), I just use the stock completion.
279 * Note that INIT_COMPLETION takes no lock. It is correct. But why
280 * in the bloody hell that thing takes struct instead of pointer to struct
281 * is quite beyond me. I just copied it from the stock completion.
283 struct ub_completion {
288 static inline void ub_init_completion(struct ub_completion *x)
291 spin_lock_init(&x->lock);
294 #define UB_INIT_COMPLETION(x) ((x).done = 0)
296 static void ub_complete(struct ub_completion *x)
300 spin_lock_irqsave(&x->lock, flags);
302 spin_unlock_irqrestore(&x->lock, flags);
305 static int ub_is_completed(struct ub_completion *x)
310 spin_lock_irqsave(&x->lock, flags);
312 spin_unlock_irqrestore(&x->lock, flags);
318 struct ub_scsi_cmd_queue {
320 struct ub_scsi_cmd *head, *tail;
324 * The block device instance (one per LUN).
328 struct list_head link;
329 struct gendisk *disk;
330 int id; /* Host index */
331 int num; /* LUN number */
334 int changed; /* Media was changed */
337 int first_open; /* Kludge. See ub_bd_open. */
339 struct ub_request urq;
341 /* Use Ingo's mempool if or when we have more than one command. */
343 * Currently we never need more than one command for the whole device.
344 * However, giving every LUN a command is a cheap and automatic way
345 * to enforce fairness between them.
348 struct ub_scsi_cmd cmdv[1];
350 struct ub_capacity capacity;
354 * The USB device instance.
358 atomic_t poison; /* The USB device is disconnected */
359 int openc; /* protected by ub_lock! */
360 /* kref is too implicit for our taste */
361 int reset; /* Reset is running */
364 struct usb_device *dev;
365 struct usb_interface *intf;
367 struct list_head luns;
369 unsigned int send_bulk_pipe; /* cached pipe values */
370 unsigned int recv_bulk_pipe;
371 unsigned int send_ctrl_pipe;
372 unsigned int recv_ctrl_pipe;
374 struct tasklet_struct tasklet;
376 struct ub_scsi_cmd_queue cmd_queue;
377 struct ub_scsi_cmd top_rqs_cmd; /* REQUEST SENSE */
378 unsigned char top_sense[UB_SENSE_SIZE];
380 struct ub_completion work_done;
382 struct timer_list work_timer;
383 int last_pipe; /* What might need clearing */
384 __le32 signature; /* Learned signature */
385 struct bulk_cb_wrap work_bcb;
386 struct bulk_cs_wrap work_bcs;
387 struct usb_ctrlrequest work_cr;
389 struct work_struct reset_work;
390 wait_queue_head_t reset_wait;
393 struct ub_scsi_trace tr;
398 static void ub_cleanup(struct ub_dev *sc);
399 static int ub_request_fn_1(struct ub_lun *lun, struct request *rq);
400 static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
401 struct ub_scsi_cmd *cmd, struct ub_request *urq);
402 static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
403 struct ub_scsi_cmd *cmd, struct ub_request *urq);
404 static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
405 static void ub_end_rq(struct request *rq, int uptodate);
406 static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
407 struct ub_request *urq, struct ub_scsi_cmd *cmd);
408 static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
409 static void ub_urb_complete(struct urb *urb, struct pt_regs *pt);
410 static void ub_scsi_action(unsigned long _dev);
411 static void ub_scsi_dispatch(struct ub_dev *sc);
412 static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
413 static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
414 static void ub_state_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int rc);
415 static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
416 static void ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
417 static void ub_state_stat_counted(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
418 static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
419 static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
421 static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd);
422 static void ub_reset_enter(struct ub_dev *sc, int try);
423 static void ub_reset_task(void *arg);
424 static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun);
425 static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
426 struct ub_capacity *ret);
427 static int ub_sync_reset(struct ub_dev *sc);
428 static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe);
429 static int ub_probe_lun(struct ub_dev *sc, int lnum);
433 #ifdef CONFIG_USB_LIBUSUAL
435 #define ub_usb_ids storage_usb_ids
438 static struct usb_device_id ub_usb_ids[] = {
439 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) },
443 MODULE_DEVICE_TABLE(usb, ub_usb_ids);
444 #endif /* CONFIG_USB_LIBUSUAL */
447 * Find me a way to identify "next free minor" for add_disk(),
448 * and the array disappears the next day. However, the number of
449 * hosts has something to do with the naming and /proc/partitions.
450 * This has to be thought out in detail before changing.
451 * If UB_MAX_HOST was 1000, we'd use a bitmap. Or a better data structure.
453 #define UB_MAX_HOSTS 26
454 static char ub_hostv[UB_MAX_HOSTS];
456 #define UB_QLOCK_NUM 5
457 static spinlock_t ub_qlockv[UB_QLOCK_NUM];
458 static int ub_qlock_next = 0;
460 static DEFINE_SPINLOCK(ub_lock); /* Locks globals and ->openc */
463 * The SCSI command tracing procedures.
466 static void ub_cmdtr_new(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
469 struct ub_scsi_cmd_trace *t;
471 if ((n = sc->tr.cur + 1) == SCMD_TRACE_SZ) n = 0;
474 memset(t, 0, sizeof(struct ub_scsi_cmd_trace));
478 t->req_size = cmd->len;
479 t->st_hst[0] = cmd->state;
482 cmd->trace_index = n;
485 static void ub_cmdtr_state(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
488 struct ub_scsi_cmd_trace *t;
490 t = &sc->tr.vec[cmd->trace_index];
491 if (t->tag == cmd->tag) {
492 if ((n = t->hcur + 1) == SCMD_ST_HIST_SZ) n = 0;
493 t->st_hst[n] = cmd->state;
498 static void ub_cmdtr_act_len(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
500 struct ub_scsi_cmd_trace *t;
502 t = &sc->tr.vec[cmd->trace_index];
503 if (t->tag == cmd->tag)
504 t->act_size = cmd->act_len;
507 static void ub_cmdtr_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
508 unsigned char *sense)
510 struct ub_scsi_cmd_trace *t;
512 t = &sc->tr.vec[cmd->trace_index];
513 if (t->tag == cmd->tag) {
514 t->key = sense[2] & 0x0F;
520 static ssize_t ub_diag_show(struct device *dev, struct device_attribute *attr,
523 struct usb_interface *intf;
531 struct ub_scsi_cmd_trace *t;
533 intf = to_usb_interface(dev);
534 sc = usb_get_intfdata(intf);
539 spin_lock_irqsave(sc->lock, flags);
541 cnt += sprintf(page + cnt,
542 "poison %d reset %d\n",
543 atomic_read(&sc->poison), sc->reset);
544 cnt += sprintf(page + cnt,
546 sc->cmd_queue.qlen, sc->cmd_queue.qmax);
547 cnt += sprintf(page + cnt,
548 "sg %d %d %d %d %d .. %d\n",
556 list_for_each (p, &sc->luns) {
557 lun = list_entry(p, struct ub_lun, link);
558 cnt += sprintf(page + cnt,
559 "lun %u changed %d removable %d readonly %d\n",
560 lun->num, lun->changed, lun->removable, lun->readonly);
563 if ((nc = sc->tr.cur + 1) == SCMD_TRACE_SZ) nc = 0;
564 for (j = 0; j < SCMD_TRACE_SZ; j++) {
567 cnt += sprintf(page + cnt, "%08x %02x", t->tag, t->op);
568 if (t->op == REQUEST_SENSE) {
569 cnt += sprintf(page + cnt, " [sense %x %02x %02x]",
570 t->key, t->asc, t->ascq);
572 cnt += sprintf(page + cnt, " %c", UB_DIR_CHAR(t->dir));
573 cnt += sprintf(page + cnt, " [%5d %5d]",
574 t->req_size, t->act_size);
576 if ((nh = t->hcur + 1) == SCMD_ST_HIST_SZ) nh = 0;
577 for (i = 0; i < SCMD_ST_HIST_SZ; i++) {
578 cnt += sprintf(page + cnt, " %s",
579 ub_scsi_cmd_stname[(int)t->st_hst[nh]]);
580 if (++nh == SCMD_ST_HIST_SZ) nh = 0;
582 cnt += sprintf(page + cnt, "\n");
584 if (++nc == SCMD_TRACE_SZ) nc = 0;
587 spin_unlock_irqrestore(sc->lock, flags);
591 static DEVICE_ATTR(diag, S_IRUGO, ub_diag_show, NULL); /* N.B. World readable */
596 * This also stores the host for indexing by minor, which is somewhat dirty.
598 static int ub_id_get(void)
603 spin_lock_irqsave(&ub_lock, flags);
604 for (i = 0; i < UB_MAX_HOSTS; i++) {
605 if (ub_hostv[i] == 0) {
607 spin_unlock_irqrestore(&ub_lock, flags);
611 spin_unlock_irqrestore(&ub_lock, flags);
615 static void ub_id_put(int id)
619 if (id < 0 || id >= UB_MAX_HOSTS) {
620 printk(KERN_ERR DRV_NAME ": bad host ID %d\n", id);
624 spin_lock_irqsave(&ub_lock, flags);
625 if (ub_hostv[id] == 0) {
626 spin_unlock_irqrestore(&ub_lock, flags);
627 printk(KERN_ERR DRV_NAME ": freeing free host ID %d\n", id);
631 spin_unlock_irqrestore(&ub_lock, flags);
635 * This is necessitated by the fact that blk_cleanup_queue does not
636 * necesserily destroy the queue. Instead, it may merely decrease q->refcnt.
637 * Since our blk_init_queue() passes a spinlock common with ub_dev,
638 * we have life time issues when ub_cleanup frees ub_dev.
640 static spinlock_t *ub_next_lock(void)
645 spin_lock_irqsave(&ub_lock, flags);
646 ret = &ub_qlockv[ub_qlock_next];
647 ub_qlock_next = (ub_qlock_next + 1) % UB_QLOCK_NUM;
648 spin_unlock_irqrestore(&ub_lock, flags);
653 * Downcount for deallocation. This rides on two assumptions:
654 * - once something is poisoned, its refcount cannot grow
655 * - opens cannot happen at this time (del_gendisk was done)
656 * If the above is true, we can drop the lock, which we need for
657 * blk_cleanup_queue(): the silly thing may attempt to sleep.
658 * [Actually, it never needs to sleep for us, but it calls might_sleep()]
660 static void ub_put(struct ub_dev *sc)
664 spin_lock_irqsave(&ub_lock, flags);
666 if (sc->openc == 0 && atomic_read(&sc->poison)) {
667 spin_unlock_irqrestore(&ub_lock, flags);
670 spin_unlock_irqrestore(&ub_lock, flags);
675 * Final cleanup and deallocation.
677 static void ub_cleanup(struct ub_dev *sc)
683 while (!list_empty(&sc->luns)) {
685 lun = list_entry(p, struct ub_lun, link);
688 /* I don't think queue can be NULL. But... Stolen from sx8.c */
689 if ((q = lun->disk->queue) != NULL)
690 blk_cleanup_queue(q);
692 * If we zero disk->private_data BEFORE put_disk, we have
693 * to check for NULL all over the place in open, release,
694 * check_media and revalidate, because the block level
695 * semaphore is well inside the put_disk.
696 * But we cannot zero after the call, because *disk is gone.
697 * The sd.c is blatantly racy in this area.
699 /* disk->private_data = NULL; */
711 * The "command allocator".
713 static struct ub_scsi_cmd *ub_get_cmd(struct ub_lun *lun)
715 struct ub_scsi_cmd *ret;
724 static void ub_put_cmd(struct ub_lun *lun, struct ub_scsi_cmd *cmd)
726 if (cmd != &lun->cmdv[0]) {
727 printk(KERN_WARNING "%s: releasing a foreign cmd %p\n",
732 printk(KERN_WARNING "%s: releasing a free cmd\n", lun->name);
741 static void ub_cmdq_add(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
743 struct ub_scsi_cmd_queue *t = &sc->cmd_queue;
745 if (t->qlen++ == 0) {
753 if (t->qlen > t->qmax)
757 static void ub_cmdq_insert(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
759 struct ub_scsi_cmd_queue *t = &sc->cmd_queue;
761 if (t->qlen++ == 0) {
769 if (t->qlen > t->qmax)
773 static struct ub_scsi_cmd *ub_cmdq_pop(struct ub_dev *sc)
775 struct ub_scsi_cmd_queue *t = &sc->cmd_queue;
776 struct ub_scsi_cmd *cmd;
788 #define ub_cmdq_peek(sc) ((sc)->cmd_queue.head)
791 * The request function is our main entry point
794 static void ub_request_fn(request_queue_t *q)
796 struct ub_lun *lun = q->queuedata;
799 while ((rq = elv_next_request(q)) != NULL) {
800 if (ub_request_fn_1(lun, rq) != 0) {
807 static int ub_request_fn_1(struct ub_lun *lun, struct request *rq)
809 struct ub_dev *sc = lun->udev;
810 struct ub_scsi_cmd *cmd;
811 struct ub_request *urq;
814 if (atomic_read(&sc->poison) || lun->changed) {
815 blkdev_dequeue_request(rq);
820 if (lun->urq.rq != NULL)
822 if ((cmd = ub_get_cmd(lun)) == NULL)
824 memset(cmd, 0, sizeof(struct ub_scsi_cmd));
826 blkdev_dequeue_request(rq);
829 memset(urq, 0, sizeof(struct ub_request));
833 * get scatterlist from block layer
835 n_elem = blk_rq_map_sg(lun->disk->queue, rq, &urq->sgv[0]);
837 printk(KERN_INFO "%s: failed request map (%d)\n",
838 lun->name, n_elem); /* P3 */
841 if (n_elem > UB_MAX_REQ_SG) { /* Paranoia */
842 printk(KERN_WARNING "%s: request with %d segments\n",
847 sc->sg_stat[n_elem < 5 ? n_elem : 5]++;
849 if (blk_pc_request(rq)) {
850 ub_cmd_build_packet(sc, lun, cmd, urq);
852 ub_cmd_build_block(sc, lun, cmd, urq);
854 cmd->state = UB_CMDST_INIT;
856 cmd->done = ub_rw_cmd_done;
859 cmd->tag = sc->tagcnt++;
860 if (ub_submit_scsi(sc, cmd) != 0)
866 ub_put_cmd(lun, cmd);
871 static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
872 struct ub_scsi_cmd *cmd, struct ub_request *urq)
874 struct request *rq = urq->rq;
875 unsigned int block, nblks;
877 if (rq_data_dir(rq) == WRITE)
878 cmd->dir = UB_DIR_WRITE;
880 cmd->dir = UB_DIR_READ;
883 memcpy(cmd->sgv, urq->sgv, sizeof(struct scatterlist) * cmd->nsg);
888 * The call to blk_queue_hardsect_size() guarantees that request
889 * is aligned, but it is given in terms of 512 byte units, always.
891 block = rq->sector >> lun->capacity.bshift;
892 nblks = rq->nr_sectors >> lun->capacity.bshift;
894 cmd->cdb[0] = (cmd->dir == UB_DIR_READ)? READ_10: WRITE_10;
895 /* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */
896 cmd->cdb[2] = block >> 24;
897 cmd->cdb[3] = block >> 16;
898 cmd->cdb[4] = block >> 8;
900 cmd->cdb[7] = nblks >> 8;
904 cmd->len = rq->nr_sectors * 512;
907 static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
908 struct ub_scsi_cmd *cmd, struct ub_request *urq)
910 struct request *rq = urq->rq;
912 if (rq->data_len == 0) {
913 cmd->dir = UB_DIR_NONE;
915 if (rq_data_dir(rq) == WRITE)
916 cmd->dir = UB_DIR_WRITE;
918 cmd->dir = UB_DIR_READ;
922 memcpy(cmd->sgv, urq->sgv, sizeof(struct scatterlist) * cmd->nsg);
924 memcpy(&cmd->cdb, rq->cmd, rq->cmd_len);
925 cmd->cdb_len = rq->cmd_len;
927 cmd->len = rq->data_len;
930 static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
932 struct ub_lun *lun = cmd->lun;
933 struct ub_request *urq = cmd->back;
939 if (cmd->error == 0) {
942 if (blk_pc_request(rq)) {
943 if (cmd->act_len >= rq->data_len)
946 rq->data_len -= cmd->act_len;
951 if (blk_pc_request(rq)) {
952 /* UB_SENSE_SIZE is smaller than SCSI_SENSE_BUFFERSIZE */
953 memcpy(rq->sense, sc->top_sense, UB_SENSE_SIZE);
954 rq->sense_len = UB_SENSE_SIZE;
955 if (sc->top_sense[0] != 0)
956 rq->errors = SAM_STAT_CHECK_CONDITION;
958 rq->errors = DID_ERROR << 16;
960 if (cmd->error == -EIO) {
961 if (ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
969 ub_put_cmd(lun, cmd);
970 ub_end_rq(rq, uptodate);
971 blk_start_queue(lun->disk->queue);
974 static void ub_end_rq(struct request *rq, int uptodate)
976 end_that_request_first(rq, uptodate, rq->hard_nr_sectors);
977 end_that_request_last(rq, uptodate);
980 static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
981 struct ub_request *urq, struct ub_scsi_cmd *cmd)
984 if (atomic_read(&sc->poison))
987 ub_reset_enter(sc, urq->current_try);
989 if (urq->current_try >= 3)
992 /* P3 */ printk("%s: dir %c len/act %d/%d "
993 "[sense %x %02x %02x] retry %d\n",
994 sc->name, UB_DIR_CHAR(cmd->dir), cmd->len, cmd->act_len,
995 cmd->key, cmd->asc, cmd->ascq, urq->current_try);
997 memset(cmd, 0, sizeof(struct ub_scsi_cmd));
998 ub_cmd_build_block(sc, lun, cmd, urq);
1000 cmd->state = UB_CMDST_INIT;
1002 cmd->done = ub_rw_cmd_done;
1005 cmd->tag = sc->tagcnt++;
1007 #if 0 /* Wasteful */
1008 return ub_submit_scsi(sc, cmd);
1010 ub_cmdq_add(sc, cmd);
1016 * Submit a regular SCSI operation (not an auto-sense).
1018 * The Iron Law of Good Submit Routine is:
1019 * Zero return - callback is done, Nonzero return - callback is not done.
1022 * Host is assumed locked.
1024 static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
1027 if (cmd->state != UB_CMDST_INIT ||
1028 (cmd->dir != UB_DIR_NONE && cmd->len == 0)) {
1032 ub_cmdq_add(sc, cmd);
1034 * We can call ub_scsi_dispatch(sc) right away here, but it's a little
1035 * safer to jump to a tasklet, in case upper layers do something silly.
1037 tasklet_schedule(&sc->tasklet);
1042 * Submit the first URB for the queued command.
1043 * This function does not deal with queueing in any way.
1045 static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
1047 struct bulk_cb_wrap *bcb;
1050 bcb = &sc->work_bcb;
1053 * ``If the allocation length is eighteen or greater, and a device
1054 * server returns less than eithteen bytes of data, the application
1055 * client should assume that the bytes not transferred would have been
1056 * zeroes had the device server returned those bytes.''
1058 * We zero sense for all commands so that when a packet request
1059 * fails it does not return a stale sense.
1061 memset(&sc->top_sense, 0, UB_SENSE_SIZE);
1063 /* set up the command wrapper */
1064 bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
1065 bcb->Tag = cmd->tag; /* Endianness is not important */
1066 bcb->DataTransferLength = cpu_to_le32(cmd->len);
1067 bcb->Flags = (cmd->dir == UB_DIR_READ) ? 0x80 : 0;
1068 bcb->Lun = (cmd->lun != NULL) ? cmd->lun->num : 0;
1069 bcb->Length = cmd->cdb_len;
1071 /* copy the command payload */
1072 memcpy(bcb->CDB, cmd->cdb, UB_MAX_CDB_SIZE);
1074 UB_INIT_COMPLETION(sc->work_done);
1076 sc->last_pipe = sc->send_bulk_pipe;
1077 usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->send_bulk_pipe,
1078 bcb, US_BULK_CB_WRAP_LEN, ub_urb_complete, sc);
1080 /* Fill what we shouldn't be filling, because usb-storage did so. */
1081 sc->work_urb.actual_length = 0;
1082 sc->work_urb.error_count = 0;
1083 sc->work_urb.status = 0;
1085 if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
1086 /* XXX Clear stalls */
1087 ub_complete(&sc->work_done);
1091 sc->work_timer.expires = jiffies + UB_URB_TIMEOUT;
1092 add_timer(&sc->work_timer);
1094 cmd->state = UB_CMDST_CMD;
1095 ub_cmdtr_state(sc, cmd);
1102 static void ub_urb_timeout(unsigned long arg)
1104 struct ub_dev *sc = (struct ub_dev *) arg;
1105 unsigned long flags;
1107 spin_lock_irqsave(sc->lock, flags);
1108 if (!ub_is_completed(&sc->work_done))
1109 usb_unlink_urb(&sc->work_urb);
1110 spin_unlock_irqrestore(sc->lock, flags);
1114 * Completion routine for the work URB.
1116 * This can be called directly from usb_submit_urb (while we have
1117 * the sc->lock taken) and from an interrupt (while we do NOT have
1118 * the sc->lock taken). Therefore, bounce this off to a tasklet.
1120 static void ub_urb_complete(struct urb *urb, struct pt_regs *pt)
1122 struct ub_dev *sc = urb->context;
1124 ub_complete(&sc->work_done);
1125 tasklet_schedule(&sc->tasklet);
1128 static void ub_scsi_action(unsigned long _dev)
1130 struct ub_dev *sc = (struct ub_dev *) _dev;
1131 unsigned long flags;
1133 spin_lock_irqsave(sc->lock, flags);
1134 ub_scsi_dispatch(sc);
1135 spin_unlock_irqrestore(sc->lock, flags);
1138 static void ub_scsi_dispatch(struct ub_dev *sc)
1140 struct ub_scsi_cmd *cmd;
1143 while (!sc->reset && (cmd = ub_cmdq_peek(sc)) != NULL) {
1144 if (cmd->state == UB_CMDST_DONE) {
1146 (*cmd->done)(sc, cmd);
1147 } else if (cmd->state == UB_CMDST_INIT) {
1148 ub_cmdtr_new(sc, cmd);
1149 if ((rc = ub_scsi_cmd_start(sc, cmd)) == 0)
1152 cmd->state = UB_CMDST_DONE;
1153 ub_cmdtr_state(sc, cmd);
1155 if (!ub_is_completed(&sc->work_done))
1157 del_timer(&sc->work_timer);
1158 ub_scsi_urb_compl(sc, cmd);
1163 static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
1165 struct urb *urb = &sc->work_urb;
1166 struct bulk_cs_wrap *bcs;
1170 if (atomic_read(&sc->poison)) {
1171 ub_state_done(sc, cmd, -ENODEV);
1175 if (cmd->state == UB_CMDST_CLEAR) {
1176 if (urb->status == -EPIPE) {
1178 * STALL while clearning STALL.
1179 * The control pipe clears itself - nothing to do.
1181 printk(KERN_NOTICE "%s: stall on control pipe\n",
1187 * We ignore the result for the halt clear.
1190 /* reset the endpoint toggle */
1191 usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
1192 usb_pipeout(sc->last_pipe), 0);
1194 ub_state_sense(sc, cmd);
1196 } else if (cmd->state == UB_CMDST_CLR2STS) {
1197 if (urb->status == -EPIPE) {
1198 printk(KERN_NOTICE "%s: stall on control pipe\n",
1204 * We ignore the result for the halt clear.
1207 /* reset the endpoint toggle */
1208 usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
1209 usb_pipeout(sc->last_pipe), 0);
1211 ub_state_stat(sc, cmd);
1213 } else if (cmd->state == UB_CMDST_CLRRS) {
1214 if (urb->status == -EPIPE) {
1215 printk(KERN_NOTICE "%s: stall on control pipe\n",
1221 * We ignore the result for the halt clear.
1224 /* reset the endpoint toggle */
1225 usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
1226 usb_pipeout(sc->last_pipe), 0);
1228 ub_state_stat_counted(sc, cmd);
1230 } else if (cmd->state == UB_CMDST_CMD) {
1231 switch (urb->status) {
1237 rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
1239 printk(KERN_NOTICE "%s: "
1240 "unable to submit clear (%d)\n",
1243 * This is typically ENOMEM or some other such shit.
1244 * Retrying is pointless. Just do Bad End on it...
1246 ub_state_done(sc, cmd, rc);
1249 cmd->state = UB_CMDST_CLEAR;
1250 ub_cmdtr_state(sc, cmd);
1252 case -ESHUTDOWN: /* unplug */
1253 case -EILSEQ: /* unplug timeout on uhci */
1254 ub_state_done(sc, cmd, -ENODEV);
1259 if (urb->actual_length != US_BULK_CB_WRAP_LEN) {
1263 if (cmd->dir == UB_DIR_NONE || cmd->nsg < 1) {
1264 ub_state_stat(sc, cmd);
1268 // udelay(125); // usb-storage has this
1269 ub_data_start(sc, cmd);
1271 } else if (cmd->state == UB_CMDST_DATA) {
1272 if (urb->status == -EPIPE) {
1273 rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
1275 printk(KERN_NOTICE "%s: "
1276 "unable to submit clear (%d)\n",
1278 ub_state_done(sc, cmd, rc);
1281 cmd->state = UB_CMDST_CLR2STS;
1282 ub_cmdtr_state(sc, cmd);
1285 if (urb->status == -EOVERFLOW) {
1287 * A babble? Failure, but we must transfer CSW now.
1289 cmd->error = -EOVERFLOW; /* A cheap trick... */
1290 ub_state_stat(sc, cmd);
1294 if (cmd->dir == UB_DIR_WRITE) {
1296 * Do not continue writes in case of a failure.
1297 * Doing so would cause sectors to be mixed up,
1298 * which is worse than sectors lost.
1300 * We must try to read the CSW, or many devices
1303 len = urb->actual_length;
1304 if (urb->status != 0 ||
1305 len != cmd->sgv[cmd->current_sg].length) {
1306 cmd->act_len += len;
1307 ub_cmdtr_act_len(sc, cmd);
1310 ub_state_stat(sc, cmd);
1316 * If an error occurs on read, we record it, and
1317 * continue to fetch data in order to avoid bubble.
1319 * As a small shortcut, we stop if we detect that
1320 * a CSW mixed into data.
1322 if (urb->status != 0)
1325 len = urb->actual_length;
1326 if (urb->status != 0 ||
1327 len != cmd->sgv[cmd->current_sg].length) {
1328 if ((len & 0x1FF) == US_BULK_CS_WRAP_LEN)
1333 cmd->act_len += urb->actual_length;
1334 ub_cmdtr_act_len(sc, cmd);
1336 if (++cmd->current_sg < cmd->nsg) {
1337 ub_data_start(sc, cmd);
1340 ub_state_stat(sc, cmd);
1342 } else if (cmd->state == UB_CMDST_STAT) {
1343 if (urb->status == -EPIPE) {
1344 rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
1346 printk(KERN_NOTICE "%s: "
1347 "unable to submit clear (%d)\n",
1349 ub_state_done(sc, cmd, rc);
1354 * Having a stall when getting CSW is an error, so
1355 * make sure uppper levels are not oblivious to it.
1357 cmd->error = -EIO; /* A cheap trick... */
1359 cmd->state = UB_CMDST_CLRRS;
1360 ub_cmdtr_state(sc, cmd);
1364 /* Catch everything, including -EOVERFLOW and other nasties. */
1365 if (urb->status != 0)
1368 if (urb->actual_length == 0) {
1369 ub_state_stat_counted(sc, cmd);
1374 * Check the returned Bulk protocol status.
1375 * The status block has to be validated first.
1378 bcs = &sc->work_bcs;
1380 if (sc->signature == cpu_to_le32(0)) {
1382 * This is the first reply, so do not perform the check.
1383 * Instead, remember the signature the device uses
1384 * for future checks. But do not allow a nul.
1386 sc->signature = bcs->Signature;
1387 if (sc->signature == cpu_to_le32(0)) {
1388 ub_state_stat_counted(sc, cmd);
1392 if (bcs->Signature != sc->signature) {
1393 ub_state_stat_counted(sc, cmd);
1398 if (bcs->Tag != cmd->tag) {
1400 * This usually happens when we disagree with the
1401 * device's microcode about something. For instance,
1402 * a few of them throw this after timeouts. They buffer
1403 * commands and reply at commands we timed out before.
1404 * Without flushing these replies we loop forever.
1406 ub_state_stat_counted(sc, cmd);
1410 len = le32_to_cpu(bcs->Residue);
1411 if (len != cmd->len - cmd->act_len) {
1413 * It is all right to transfer less, the caller has
1414 * to check. But it's not all right if the device
1415 * counts disagree with our counts.
1417 /* P3 */ printk("%s: resid %d len %d act %d\n",
1418 sc->name, len, cmd->len, cmd->act_len);
1422 switch (bcs->Status) {
1423 case US_BULK_STAT_OK:
1425 case US_BULK_STAT_FAIL:
1426 ub_state_sense(sc, cmd);
1428 case US_BULK_STAT_PHASE:
1429 /* P3 */ printk("%s: status PHASE\n", sc->name);
1432 printk(KERN_INFO "%s: unknown CSW status 0x%x\n",
1433 sc->name, bcs->Status);
1434 ub_state_done(sc, cmd, -EINVAL);
1438 /* Not zeroing error to preserve a babble indicator */
1439 if (cmd->error != 0) {
1440 ub_state_sense(sc, cmd);
1443 cmd->state = UB_CMDST_DONE;
1444 ub_cmdtr_state(sc, cmd);
1446 (*cmd->done)(sc, cmd);
1448 } else if (cmd->state == UB_CMDST_SENSE) {
1449 ub_state_done(sc, cmd, -EIO);
1452 printk(KERN_WARNING "%s: "
1453 "wrong command state %d\n",
1454 sc->name, cmd->state);
1455 ub_state_done(sc, cmd, -EINVAL);
1460 Bad_End: /* Little Excel is dead */
1461 ub_state_done(sc, cmd, -EIO);
1465 * Factorization helper for the command state machine:
1466 * Initiate a data segment transfer.
1468 static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
1470 struct scatterlist *sg = &cmd->sgv[cmd->current_sg];
1474 UB_INIT_COMPLETION(sc->work_done);
1476 if (cmd->dir == UB_DIR_READ)
1477 pipe = sc->recv_bulk_pipe;
1479 pipe = sc->send_bulk_pipe;
1480 sc->last_pipe = pipe;
1481 usb_fill_bulk_urb(&sc->work_urb, sc->dev, pipe,
1482 page_address(sg->page) + sg->offset, sg->length,
1483 ub_urb_complete, sc);
1484 sc->work_urb.actual_length = 0;
1485 sc->work_urb.error_count = 0;
1486 sc->work_urb.status = 0;
1488 if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
1489 /* XXX Clear stalls */
1490 ub_complete(&sc->work_done);
1491 ub_state_done(sc, cmd, rc);
1495 sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT;
1496 add_timer(&sc->work_timer);
1498 cmd->state = UB_CMDST_DATA;
1499 ub_cmdtr_state(sc, cmd);
1503 * Factorization helper for the command state machine:
1504 * Finish the command.
1506 static void ub_state_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int rc)
1510 cmd->state = UB_CMDST_DONE;
1511 ub_cmdtr_state(sc, cmd);
1513 (*cmd->done)(sc, cmd);
1517 * Factorization helper for the command state machine:
1518 * Submit a CSW read.
1520 static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
1524 UB_INIT_COMPLETION(sc->work_done);
1526 sc->last_pipe = sc->recv_bulk_pipe;
1527 usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->recv_bulk_pipe,
1528 &sc->work_bcs, US_BULK_CS_WRAP_LEN, ub_urb_complete, sc);
1529 sc->work_urb.actual_length = 0;
1530 sc->work_urb.error_count = 0;
1531 sc->work_urb.status = 0;
1533 if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
1534 /* XXX Clear stalls */
1535 ub_complete(&sc->work_done);
1536 ub_state_done(sc, cmd, rc);
1540 sc->work_timer.expires = jiffies + UB_STAT_TIMEOUT;
1541 add_timer(&sc->work_timer);
1546 * Factorization helper for the command state machine:
1547 * Submit a CSW read and go to STAT state.
1549 static void ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
1552 if (__ub_state_stat(sc, cmd) != 0)
1555 cmd->stat_count = 0;
1556 cmd->state = UB_CMDST_STAT;
1557 ub_cmdtr_state(sc, cmd);
1561 * Factorization helper for the command state machine:
1562 * Submit a CSW read and go to STAT state with counter (along [C] path).
1564 static void ub_state_stat_counted(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
1567 if (++cmd->stat_count >= 4) {
1568 ub_state_sense(sc, cmd);
1572 if (__ub_state_stat(sc, cmd) != 0)
1575 cmd->state = UB_CMDST_STAT;
1576 ub_cmdtr_state(sc, cmd);
1580 * Factorization helper for the command state machine:
1581 * Submit a REQUEST SENSE and go to SENSE state.
1583 static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
1585 struct ub_scsi_cmd *scmd;
1586 struct scatterlist *sg;
1589 if (cmd->cdb[0] == REQUEST_SENSE) {
1594 scmd = &sc->top_rqs_cmd;
1595 memset(scmd, 0, sizeof(struct ub_scsi_cmd));
1596 scmd->cdb[0] = REQUEST_SENSE;
1597 scmd->cdb[4] = UB_SENSE_SIZE;
1599 scmd->dir = UB_DIR_READ;
1600 scmd->state = UB_CMDST_INIT;
1603 sg->page = virt_to_page(sc->top_sense);
1604 sg->offset = (unsigned long)sc->top_sense & (PAGE_SIZE-1);
1605 sg->length = UB_SENSE_SIZE;
1606 scmd->len = UB_SENSE_SIZE;
1607 scmd->lun = cmd->lun;
1608 scmd->done = ub_top_sense_done;
1611 scmd->tag = sc->tagcnt++;
1613 cmd->state = UB_CMDST_SENSE;
1614 ub_cmdtr_state(sc, cmd);
1616 ub_cmdq_insert(sc, scmd);
1620 ub_state_done(sc, cmd, rc);
1624 * A helper for the command's state machine:
1625 * Submit a stall clear.
1627 static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
1631 struct usb_ctrlrequest *cr;
1634 endp = usb_pipeendpoint(stalled_pipe);
1635 if (usb_pipein (stalled_pipe))
1639 cr->bRequestType = USB_RECIP_ENDPOINT;
1640 cr->bRequest = USB_REQ_CLEAR_FEATURE;
1641 cr->wValue = cpu_to_le16(USB_ENDPOINT_HALT);
1642 cr->wIndex = cpu_to_le16(endp);
1643 cr->wLength = cpu_to_le16(0);
1645 UB_INIT_COMPLETION(sc->work_done);
1647 usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
1648 (unsigned char*) cr, NULL, 0, ub_urb_complete, sc);
1649 sc->work_urb.actual_length = 0;
1650 sc->work_urb.error_count = 0;
1651 sc->work_urb.status = 0;
1653 if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
1654 ub_complete(&sc->work_done);
1658 sc->work_timer.expires = jiffies + UB_CTRL_TIMEOUT;
1659 add_timer(&sc->work_timer);
1665 static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
1667 unsigned char *sense = sc->top_sense;
1668 struct ub_scsi_cmd *cmd;
1671 * Ignoring scmd->act_len, because the buffer was pre-zeroed.
1673 ub_cmdtr_sense(sc, scmd, sense);
1676 * Find the command which triggered the unit attention or a check,
1677 * save the sense into it, and advance its state machine.
1679 if ((cmd = ub_cmdq_peek(sc)) == NULL) {
1680 printk(KERN_WARNING "%s: sense done while idle\n", sc->name);
1683 if (cmd != scmd->back) {
1684 printk(KERN_WARNING "%s: "
1685 "sense done for wrong command 0x%x\n",
1686 sc->name, cmd->tag);
1689 if (cmd->state != UB_CMDST_SENSE) {
1690 printk(KERN_WARNING "%s: "
1691 "sense done with bad cmd state %d\n",
1692 sc->name, cmd->state);
1696 cmd->key = sense[2] & 0x0F;
1697 cmd->asc = sense[12];
1698 cmd->ascq = sense[13];
1700 ub_scsi_urb_compl(sc, cmd);
1705 * XXX Move usb_reset_device to khubd. Hogging kevent is not a good thing.
1706 * XXX Make usb_sync_reset asynchronous.
1709 static void ub_reset_enter(struct ub_dev *sc, int try)
1713 /* This happens often on multi-LUN devices. */
1716 sc->reset = try + 1;
1718 #if 0 /* Not needed because the disconnect waits for us. */
1719 unsigned long flags;
1720 spin_lock_irqsave(&ub_lock, flags);
1722 spin_unlock_irqrestore(&ub_lock, flags);
1725 #if 0 /* We let them stop themselves. */
1726 struct list_head *p;
1728 list_for_each(p, &sc->luns) {
1729 lun = list_entry(p, struct ub_lun, link);
1730 blk_stop_queue(lun->disk->queue);
1734 schedule_work(&sc->reset_work);
1737 static void ub_reset_task(void *arg)
1739 struct ub_dev *sc = arg;
1740 unsigned long flags;
1741 struct list_head *p;
1746 printk(KERN_WARNING "%s: Running reset unrequested\n",
1751 if (atomic_read(&sc->poison)) {
1752 printk(KERN_NOTICE "%s: Not resetting disconnected device\n",
1753 sc->name); /* P3 This floods. Remove soon. XXX */
1754 } else if ((sc->reset & 1) == 0) {
1756 msleep(700); /* usb-storage sleeps 6s (!) */
1757 ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
1758 ub_probe_clear_stall(sc, sc->send_bulk_pipe);
1759 } else if (sc->dev->actconfig->desc.bNumInterfaces != 1) {
1760 printk(KERN_NOTICE "%s: Not resetting multi-interface device\n",
1761 sc->name); /* P3 This floods. Remove soon. XXX */
1763 if ((lkr = usb_lock_device_for_reset(sc->dev, sc->intf)) < 0) {
1765 "%s: usb_lock_device_for_reset failed (%d)\n",
1768 rc = usb_reset_device(sc->dev);
1770 printk(KERN_NOTICE "%s: "
1771 "usb_lock_device_for_reset failed (%d)\n",
1776 usb_unlock_device(sc->dev);
1781 * In theory, no commands can be running while reset is active,
1782 * so nobody can ask for another reset, and so we do not need any
1783 * queues of resets or anything. We do need a spinlock though,
1784 * to interact with block layer.
1786 spin_lock_irqsave(sc->lock, flags);
1788 tasklet_schedule(&sc->tasklet);
1789 list_for_each(p, &sc->luns) {
1790 lun = list_entry(p, struct ub_lun, link);
1791 blk_start_queue(lun->disk->queue);
1793 wake_up(&sc->reset_wait);
1794 spin_unlock_irqrestore(sc->lock, flags);
1798 * This is called from a process context.
1800 static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun)
1803 lun->readonly = 0; /* XXX Query this from the device */
1805 lun->capacity.nsec = 0;
1806 lun->capacity.bsize = 512;
1807 lun->capacity.bshift = 0;
1809 if (ub_sync_tur(sc, lun) != 0)
1810 return; /* Not ready */
1813 if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) {
1815 * The retry here means something is wrong, either with the
1816 * device, with the transport, or with our code.
1817 * We keep this because sd.c has retries for capacity.
1819 if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) {
1820 lun->capacity.nsec = 0;
1821 lun->capacity.bsize = 512;
1822 lun->capacity.bshift = 0;
1829 * This is mostly needed to keep refcounting, but also to support
1830 * media checks on removable media drives.
1832 static int ub_bd_open(struct inode *inode, struct file *filp)
1834 struct gendisk *disk = inode->i_bdev->bd_disk;
1837 unsigned long flags;
1840 if ((lun = disk->private_data) == NULL)
1844 spin_lock_irqsave(&ub_lock, flags);
1845 if (atomic_read(&sc->poison)) {
1846 spin_unlock_irqrestore(&ub_lock, flags);
1850 spin_unlock_irqrestore(&ub_lock, flags);
1853 * This is a workaround for a specific problem in our block layer.
1854 * In 2.6.9, register_disk duplicates the code from rescan_partitions.
1855 * However, if we do add_disk with a device which persistently reports
1856 * a changed media, add_disk calls register_disk, which does do_open,
1857 * which will call rescan_paritions for changed media. After that,
1858 * register_disk attempts to do it all again and causes double kobject
1859 * registration and a eventually an oops on module removal.
1861 * The bottom line is, Al Viro says that we should not allow
1862 * bdev->bd_invalidated to be set when doing add_disk no matter what.
1864 if (lun->first_open) {
1865 lun->first_open = 0;
1872 if (lun->removable || lun->readonly)
1873 check_disk_change(inode->i_bdev);
1876 * The sd.c considers ->media_present and ->changed not equivalent,
1877 * under some pretty murky conditions (a failure of READ CAPACITY).
1878 * We may need it one day.
1880 if (lun->removable && lun->changed && !(filp->f_flags & O_NDELAY)) {
1885 if (lun->readonly && (filp->f_mode & FMODE_WRITE)) {
1899 static int ub_bd_release(struct inode *inode, struct file *filp)
1901 struct gendisk *disk = inode->i_bdev->bd_disk;
1902 struct ub_lun *lun = disk->private_data;
1903 struct ub_dev *sc = lun->udev;
1910 * The ioctl interface.
1912 static int ub_bd_ioctl(struct inode *inode, struct file *filp,
1913 unsigned int cmd, unsigned long arg)
1915 struct gendisk *disk = inode->i_bdev->bd_disk;
1916 void __user *usermem = (void __user *) arg;
1918 return scsi_cmd_ioctl(filp, disk, cmd, usermem);
1922 * This is called once a new disk was seen by the block layer or by ub_probe().
1923 * The main onjective here is to discover the features of the media such as
1924 * the capacity, read-only status, etc. USB storage generally does not
1925 * need to be spun up, but if we needed it, this would be the place.
1927 * This call can sleep.
1929 * The return code is not used.
1931 static int ub_bd_revalidate(struct gendisk *disk)
1933 struct ub_lun *lun = disk->private_data;
1935 ub_revalidate(lun->udev, lun);
1937 /* XXX Support sector size switching like in sr.c */
1938 blk_queue_hardsect_size(disk->queue, lun->capacity.bsize);
1939 set_capacity(disk, lun->capacity.nsec);
1940 // set_disk_ro(sdkp->disk, lun->readonly);
1946 * The check is called by the block layer to verify if the media
1947 * is still available. It is supposed to be harmless, lightweight and
1948 * non-intrusive in case the media was not changed.
1950 * This call can sleep.
1952 * The return code is bool!
1954 static int ub_bd_media_changed(struct gendisk *disk)
1956 struct ub_lun *lun = disk->private_data;
1958 if (!lun->removable)
1962 * We clean checks always after every command, so this is not
1963 * as dangerous as it looks. If the TEST_UNIT_READY fails here,
1964 * the device is actually not ready with operator or software
1965 * intervention required. One dangerous item might be a drive which
1966 * spins itself down, and come the time to write dirty pages, this
1967 * will fail, then block layer discards the data. Since we never
1968 * spin drives up, such devices simply cannot be used with ub anyway.
1970 if (ub_sync_tur(lun->udev, lun) != 0) {
1975 return lun->changed;
1978 static struct block_device_operations ub_bd_fops = {
1979 .owner = THIS_MODULE,
1981 .release = ub_bd_release,
1982 .ioctl = ub_bd_ioctl,
1983 .media_changed = ub_bd_media_changed,
1984 .revalidate_disk = ub_bd_revalidate,
1988 * Common ->done routine for commands executed synchronously.
1990 static void ub_probe_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
1992 struct completion *cop = cmd->back;
1997 * Test if the device has a check condition on it, synchronously.
1999 static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun)
2001 struct ub_scsi_cmd *cmd;
2002 enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) };
2003 unsigned long flags;
2004 struct completion compl;
2007 init_completion(&compl);
2010 if ((cmd = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
2012 memset(cmd, 0, ALLOC_SIZE);
2014 cmd->cdb[0] = TEST_UNIT_READY;
2016 cmd->dir = UB_DIR_NONE;
2017 cmd->state = UB_CMDST_INIT;
2018 cmd->lun = lun; /* This may be NULL, but that's ok */
2019 cmd->done = ub_probe_done;
2022 spin_lock_irqsave(sc->lock, flags);
2023 cmd->tag = sc->tagcnt++;
2025 rc = ub_submit_scsi(sc, cmd);
2026 spin_unlock_irqrestore(sc->lock, flags);
2029 printk("ub: testing ready: submit error (%d)\n", rc); /* P3 */
2033 wait_for_completion(&compl);
2037 if (rc == -EIO && cmd->key != 0) /* Retries for benh's key */
2047 * Read the SCSI capacity synchronously (for probing).
2049 static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
2050 struct ub_capacity *ret)
2052 struct ub_scsi_cmd *cmd;
2053 struct scatterlist *sg;
2055 enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) + 8 };
2056 unsigned long flags;
2057 unsigned int bsize, shift;
2059 struct completion compl;
2062 init_completion(&compl);
2065 if ((cmd = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
2067 memset(cmd, 0, ALLOC_SIZE);
2068 p = (char *)cmd + sizeof(struct ub_scsi_cmd);
2072 cmd->dir = UB_DIR_READ;
2073 cmd->state = UB_CMDST_INIT;
2076 sg->page = virt_to_page(p);
2077 sg->offset = (unsigned long)p & (PAGE_SIZE-1);
2081 cmd->done = ub_probe_done;
2084 spin_lock_irqsave(sc->lock, flags);
2085 cmd->tag = sc->tagcnt++;
2087 rc = ub_submit_scsi(sc, cmd);
2088 spin_unlock_irqrestore(sc->lock, flags);
2091 printk("ub: reading capacity: submit error (%d)\n", rc); /* P3 */
2095 wait_for_completion(&compl);
2097 if (cmd->error != 0) {
2098 printk("ub: reading capacity: error %d\n", cmd->error); /* P3 */
2102 if (cmd->act_len != 8) {
2103 printk("ub: reading capacity: size %d\n", cmd->act_len); /* P3 */
2108 /* sd.c special-cases sector size of 0 to mean 512. Needed? Safe? */
2109 nsec = be32_to_cpu(*(__be32 *)p) + 1;
2110 bsize = be32_to_cpu(*(__be32 *)(p + 4));
2112 case 512: shift = 0; break;
2113 case 1024: shift = 1; break;
2114 case 2048: shift = 2; break;
2115 case 4096: shift = 3; break;
2117 printk("ub: Bad sector size %u\n", bsize); /* P3 */
2123 ret->bshift = shift;
2124 ret->nsec = nsec << shift;
2137 static void ub_probe_urb_complete(struct urb *urb, struct pt_regs *pt)
2139 struct completion *cop = urb->context;
2143 static void ub_probe_timeout(unsigned long arg)
2145 struct completion *cop = (struct completion *) arg;
2150 * Reset with a Bulk reset.
2152 static int ub_sync_reset(struct ub_dev *sc)
2154 int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber;
2155 struct usb_ctrlrequest *cr;
2156 struct completion compl;
2157 struct timer_list timer;
2160 init_completion(&compl);
2163 cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
2164 cr->bRequest = US_BULK_RESET_REQUEST;
2165 cr->wValue = cpu_to_le16(0);
2166 cr->wIndex = cpu_to_le16(ifnum);
2167 cr->wLength = cpu_to_le16(0);
2169 usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
2170 (unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl);
2171 sc->work_urb.actual_length = 0;
2172 sc->work_urb.error_count = 0;
2173 sc->work_urb.status = 0;
2175 if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
2177 "%s: Unable to submit a bulk reset (%d)\n", sc->name, rc);
2182 timer.function = ub_probe_timeout;
2183 timer.data = (unsigned long) &compl;
2184 timer.expires = jiffies + UB_CTRL_TIMEOUT;
2187 wait_for_completion(&compl);
2189 del_timer_sync(&timer);
2190 usb_kill_urb(&sc->work_urb);
2192 return sc->work_urb.status;
2196 * Get number of LUNs by the way of Bulk GetMaxLUN command.
2198 static int ub_sync_getmaxlun(struct ub_dev *sc)
2200 int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber;
2202 enum { ALLOC_SIZE = 1 };
2203 struct usb_ctrlrequest *cr;
2204 struct completion compl;
2205 struct timer_list timer;
2209 init_completion(&compl);
2212 if ((p = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
2217 cr->bRequestType = USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
2218 cr->bRequest = US_BULK_GET_MAX_LUN;
2219 cr->wValue = cpu_to_le16(0);
2220 cr->wIndex = cpu_to_le16(ifnum);
2221 cr->wLength = cpu_to_le16(1);
2223 usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe,
2224 (unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl);
2225 sc->work_urb.actual_length = 0;
2226 sc->work_urb.error_count = 0;
2227 sc->work_urb.status = 0;
2229 if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
2231 printk("%s: Stall submitting GetMaxLUN, using 1 LUN\n",
2235 "%s: Unable to submit GetMaxLUN (%d)\n",
2242 timer.function = ub_probe_timeout;
2243 timer.data = (unsigned long) &compl;
2244 timer.expires = jiffies + UB_CTRL_TIMEOUT;
2247 wait_for_completion(&compl);
2249 del_timer_sync(&timer);
2250 usb_kill_urb(&sc->work_urb);
2252 if ((rc = sc->work_urb.status) < 0) {
2254 printk("%s: Stall at GetMaxLUN, using 1 LUN\n",
2258 "%s: Error at GetMaxLUN (%d)\n",
2264 if (sc->work_urb.actual_length != 1) {
2265 printk("%s: GetMaxLUN returned %d bytes\n", sc->name,
2266 sc->work_urb.actual_length); /* P3 */
2269 if ((nluns = *p) == 55) {
2272 /* GetMaxLUN returns the maximum LUN number */
2274 if (nluns > UB_MAX_LUNS)
2275 nluns = UB_MAX_LUNS;
2277 printk("%s: GetMaxLUN returned %d, using %d LUNs\n", sc->name,
2278 *p, nluns); /* P3 */
2292 * Clear initial stalls.
2294 static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe)
2297 struct usb_ctrlrequest *cr;
2298 struct completion compl;
2299 struct timer_list timer;
2302 init_completion(&compl);
2304 endp = usb_pipeendpoint(stalled_pipe);
2305 if (usb_pipein (stalled_pipe))
2309 cr->bRequestType = USB_RECIP_ENDPOINT;
2310 cr->bRequest = USB_REQ_CLEAR_FEATURE;
2311 cr->wValue = cpu_to_le16(USB_ENDPOINT_HALT);
2312 cr->wIndex = cpu_to_le16(endp);
2313 cr->wLength = cpu_to_le16(0);
2315 usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
2316 (unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl);
2317 sc->work_urb.actual_length = 0;
2318 sc->work_urb.error_count = 0;
2319 sc->work_urb.status = 0;
2321 if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
2323 "%s: Unable to submit a probe clear (%d)\n", sc->name, rc);
2328 timer.function = ub_probe_timeout;
2329 timer.data = (unsigned long) &compl;
2330 timer.expires = jiffies + UB_CTRL_TIMEOUT;
2333 wait_for_completion(&compl);
2335 del_timer_sync(&timer);
2336 usb_kill_urb(&sc->work_urb);
2338 /* reset the endpoint toggle */
2339 usb_settoggle(sc->dev, endp, usb_pipeout(sc->last_pipe), 0);
2345 * Get the pipe settings.
2347 static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev,
2348 struct usb_interface *intf)
2350 struct usb_host_interface *altsetting = intf->cur_altsetting;
2351 struct usb_endpoint_descriptor *ep_in = NULL;
2352 struct usb_endpoint_descriptor *ep_out = NULL;
2353 struct usb_endpoint_descriptor *ep;
2357 * Find the endpoints we need.
2358 * We are expecting a minimum of 2 endpoints - in and out (bulk).
2359 * We will ignore any others.
2361 for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
2362 ep = &altsetting->endpoint[i].desc;
2364 /* Is it a BULK endpoint? */
2365 if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
2366 == USB_ENDPOINT_XFER_BULK) {
2367 /* BULK in or out? */
2368 if (ep->bEndpointAddress & USB_DIR_IN)
2375 if (ep_in == NULL || ep_out == NULL) {
2376 printk(KERN_NOTICE "%s: failed endpoint check\n",
2381 /* Calculate and store the pipe values */
2382 sc->send_ctrl_pipe = usb_sndctrlpipe(dev, 0);
2383 sc->recv_ctrl_pipe = usb_rcvctrlpipe(dev, 0);
2384 sc->send_bulk_pipe = usb_sndbulkpipe(dev,
2385 ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
2386 sc->recv_bulk_pipe = usb_rcvbulkpipe(dev,
2387 ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
2393 * Probing is done in the process context, which allows us to cheat
2394 * and not to build a state machine for the discovery.
2396 static int ub_probe(struct usb_interface *intf,
2397 const struct usb_device_id *dev_id)
2404 if (usb_usual_check_type(dev_id, USB_US_TYPE_UB))
2408 if ((sc = kmalloc(sizeof(struct ub_dev), GFP_KERNEL)) == NULL)
2410 memset(sc, 0, sizeof(struct ub_dev));
2411 sc->lock = ub_next_lock();
2412 INIT_LIST_HEAD(&sc->luns);
2413 usb_init_urb(&sc->work_urb);
2414 tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc);
2415 atomic_set(&sc->poison, 0);
2416 INIT_WORK(&sc->reset_work, ub_reset_task, sc);
2417 init_waitqueue_head(&sc->reset_wait);
2419 init_timer(&sc->work_timer);
2420 sc->work_timer.data = (unsigned long) sc;
2421 sc->work_timer.function = ub_urb_timeout;
2423 ub_init_completion(&sc->work_done);
2424 sc->work_done.done = 1; /* A little yuk, but oh well... */
2426 sc->dev = interface_to_usbdev(intf);
2428 // sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
2429 usb_set_intfdata(intf, sc);
2430 usb_get_dev(sc->dev);
2431 // usb_get_intf(sc->intf); /* Do we need this? */
2433 snprintf(sc->name, 12, DRV_NAME "(%d.%d)",
2434 sc->dev->bus->busnum, sc->dev->devnum);
2436 /* XXX Verify that we can handle the device (from descriptors) */
2438 if (ub_get_pipes(sc, sc->dev, intf) != 0)
2441 if (device_create_file(&sc->intf->dev, &dev_attr_diag) != 0)
2445 * At this point, all USB initialization is done, do upper layer.
2446 * We really hate halfway initialized structures, so from the
2447 * invariants perspective, this ub_dev is fully constructed at
2452 * This is needed to clear toggles. It is a problem only if we do
2453 * `rmmod ub && modprobe ub` without disconnects, but we like that.
2455 #if 0 /* iPod Mini fails if we do this (big white iPod works) */
2456 ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
2457 ub_probe_clear_stall(sc, sc->send_bulk_pipe);
2461 * The way this is used by the startup code is a little specific.
2462 * A SCSI check causes a USB stall. Our common case code sees it
2463 * and clears the check, after which the device is ready for use.
2464 * But if a check was not present, any command other than
2465 * TEST_UNIT_READY ends with a lockup (including REQUEST_SENSE).
2467 * If we neglect to clear the SCSI check, the first real command fails
2468 * (which is the capacity readout). We clear that and retry, but why
2469 * causing spurious retries for no reason.
2471 * Revalidation may start with its own TEST_UNIT_READY, but that one
2472 * has to succeed, so we clear checks with an additional one here.
2473 * In any case it's not our business how revaliadation is implemented.
2475 for (i = 0; i < 3; i++) { /* Retries for benh's key */
2476 if ((rc = ub_sync_tur(sc, NULL)) <= 0) break;
2477 if (rc != 0x6) break;
2482 for (i = 0; i < 3; i++) {
2483 if ((rc = ub_sync_getmaxlun(sc)) < 0) {
2485 * This segment is taken from usb-storage. They say
2486 * that ZIP-100 needs this, but my own ZIP-100 works
2487 * fine without this.
2488 * Still, it does not seem to hurt anything.
2491 ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
2492 ub_probe_clear_stall(sc, sc->send_bulk_pipe);
2503 for (i = 0; i < nluns; i++) {
2504 ub_probe_lun(sc, i);
2508 /* device_remove_file(&sc->intf->dev, &dev_attr_diag); */
2511 usb_set_intfdata(intf, NULL);
2512 // usb_put_intf(sc->intf);
2513 usb_put_dev(sc->dev);
2519 static int ub_probe_lun(struct ub_dev *sc, int lnum)
2523 struct gendisk *disk;
2527 if ((lun = kmalloc(sizeof(struct ub_lun), GFP_KERNEL)) == NULL)
2529 memset(lun, 0, sizeof(struct ub_lun));
2533 if ((lun->id = ub_id_get()) == -1)
2537 list_add(&lun->link, &sc->luns);
2539 snprintf(lun->name, 16, DRV_NAME "%c(%d.%d.%d)",
2540 lun->id + 'a', sc->dev->bus->busnum, sc->dev->devnum, lun->num);
2542 lun->removable = 1; /* XXX Query this from the device */
2543 lun->changed = 1; /* ub_revalidate clears only */
2544 lun->first_open = 1;
2545 ub_revalidate(sc, lun);
2548 if ((disk = alloc_disk(UB_PARTS_PER_LUN)) == NULL)
2552 sprintf(disk->disk_name, DRV_NAME "%c", lun->id + 'a');
2553 sprintf(disk->devfs_name, DEVFS_NAME "/%c", lun->id + 'a');
2554 disk->major = UB_MAJOR;
2555 disk->first_minor = lun->id * UB_PARTS_PER_LUN;
2556 disk->fops = &ub_bd_fops;
2557 disk->private_data = lun;
2558 disk->driverfs_dev = &sc->intf->dev;
2561 if ((q = blk_init_queue(ub_request_fn, sc->lock)) == NULL)
2566 blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
2567 blk_queue_max_hw_segments(q, UB_MAX_REQ_SG);
2568 blk_queue_max_phys_segments(q, UB_MAX_REQ_SG);
2569 blk_queue_segment_boundary(q, 0xffffffff); /* Dubious. */
2570 blk_queue_max_sectors(q, UB_MAX_SECTORS);
2571 blk_queue_hardsect_size(q, lun->capacity.bsize);
2575 set_capacity(disk, lun->capacity.nsec);
2577 disk->flags |= GENHD_FL_REMOVABLE;
2586 list_del(&lun->link);
2594 static void ub_disconnect(struct usb_interface *intf)
2596 struct ub_dev *sc = usb_get_intfdata(intf);
2597 struct list_head *p;
2599 struct gendisk *disk;
2600 unsigned long flags;
2603 * Prevent ub_bd_release from pulling the rug from under us.
2604 * XXX This is starting to look like a kref.
2605 * XXX Why not to take this ref at probe time?
2607 spin_lock_irqsave(&ub_lock, flags);
2609 spin_unlock_irqrestore(&ub_lock, flags);
2612 * Fence stall clearnings, operations triggered by unlinkings and so on.
2613 * We do not attempt to unlink any URBs, because we do not trust the
2614 * unlink paths in HC drivers. Also, we get -84 upon disconnect anyway.
2616 atomic_set(&sc->poison, 1);
2619 * Wait for reset to end, if any.
2621 wait_event(sc->reset_wait, !sc->reset);
2624 * Blow away queued commands.
2626 * Actually, this never works, because before we get here
2627 * the HCD terminates outstanding URB(s). It causes our
2628 * SCSI command queue to advance, commands fail to submit,
2629 * and the whole queue drains. So, we just use this code to
2632 spin_lock_irqsave(sc->lock, flags);
2634 struct ub_scsi_cmd *cmd;
2636 while ((cmd = ub_cmdq_peek(sc)) != NULL) {
2637 cmd->error = -ENOTCONN;
2638 cmd->state = UB_CMDST_DONE;
2639 ub_cmdtr_state(sc, cmd);
2641 (*cmd->done)(sc, cmd);
2645 printk(KERN_WARNING "%s: "
2646 "%d was queued after shutdown\n", sc->name, cnt);
2649 spin_unlock_irqrestore(sc->lock, flags);
2652 * Unregister the upper layer.
2654 list_for_each (p, &sc->luns) {
2655 lun = list_entry(p, struct ub_lun, link);
2657 if (disk->flags & GENHD_FL_UP)
2660 * I wish I could do:
2661 * set_bit(QUEUE_FLAG_DEAD, &q->queue_flags);
2662 * As it is, we rely on our internal poisoning and let
2663 * the upper levels to spin furiously failing all the I/O.
2668 * Testing for -EINPROGRESS is always a bug, so we are bending
2669 * the rules a little.
2671 spin_lock_irqsave(sc->lock, flags);
2672 if (sc->work_urb.status == -EINPROGRESS) { /* janitors: ignore */
2673 printk(KERN_WARNING "%s: "
2674 "URB is active after disconnect\n", sc->name);
2676 spin_unlock_irqrestore(sc->lock, flags);
2679 * There is virtually no chance that other CPU runs times so long
2680 * after ub_urb_complete should have called del_timer, but only if HCD
2681 * didn't forget to deliver a callback on unlink.
2683 del_timer_sync(&sc->work_timer);
2686 * At this point there must be no commands coming from anyone
2687 * and no URBs left in transit.
2690 device_remove_file(&sc->intf->dev, &dev_attr_diag);
2691 usb_set_intfdata(intf, NULL);
2692 // usb_put_intf(sc->intf);
2694 usb_put_dev(sc->dev);
2700 static struct usb_driver ub_driver = {
2703 .disconnect = ub_disconnect,
2704 .id_table = ub_usb_ids,
2707 static int __init ub_init(void)
2712 for (i = 0; i < UB_QLOCK_NUM; i++)
2713 spin_lock_init(&ub_qlockv[i]);
2715 if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0)
2717 devfs_mk_dir(DEVFS_NAME);
2719 if ((rc = usb_register(&ub_driver)) != 0)
2722 usb_usual_set_present(USB_US_TYPE_UB);
2726 devfs_remove(DEVFS_NAME);
2727 unregister_blkdev(UB_MAJOR, DRV_NAME);
2732 static void __exit ub_exit(void)
2734 usb_deregister(&ub_driver);
2736 devfs_remove(DEVFS_NAME);
2737 unregister_blkdev(UB_MAJOR, DRV_NAME);
2738 usb_usual_clear_present(USB_US_TYPE_UB);
2741 module_init(ub_init);
2742 module_exit(ub_exit);
2744 MODULE_LICENSE("GPL");