git.oblomov.eu Git - linux-2.6/blob - sound/oss/ali5455.c

   1 /*
   2  *      ALI  ali5455 and friends ICH driver for Linux
   3  *      LEI HU <Lei_Hu@ali.com.tw>
   4  *
   5  *  Built from:
   6  *      drivers/sound/i810_audio
   7  *
   8  *      The ALi 5455 is similar but not quite identical to the Intel ICH
   9  *      series of controllers. Its easier to keep the driver separated from
  10  *      the i810 driver.
  11  *
  12  *      This program is free software; you can redistribute it and/or modify
  13  *      it under the terms of the GNU General Public License as published by
  14  *      the Free Software Foundation; either version 2 of the License, or
  15  *      (at your option) any later version.
  16  *
  17  *      This program is distributed in the hope that it will be useful,
  18  *      but WITHOUT ANY WARRANTY; without even the implied warranty of
  19  *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20  *      GNU General Public License for more details.
  21  *
  22  *      You should have received a copy of the GNU General Public License
  23  *      along with this program; if not, write to the Free Software
  24  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  25  *
  26  *
  27  *      ALi 5455 theory of operation
  28  *
  29  *      The chipset provides three DMA channels that talk to an AC97
  30  *      CODEC (AC97 is a digital/analog mixer standard). At its simplest
  31  *      you get 48Khz audio with basic volume and mixer controls. At the
  32  *      best you get rate adaption in the codec. We set the card up so
  33  *      that we never take completion interrupts but instead keep the card
  34  *      chasing its tail around a ring buffer. This is needed for mmap
  35  *      mode audio and happens to work rather well for non-mmap modes too.
  36  *
  37  *      The board has one output channel for PCM audio (supported) and
  38  *      a stereo line in and mono microphone input. Again these are normally
  39  *      locked to 48Khz only. Right now recording is not finished.
  40  *
  41  *      There is no midi support, no synth support. Use timidity. To get
  42  *      esd working you need to use esd -r 48000 as it won't probe 48KHz
  43  *      by default. mpg123 can't handle 48Khz only audio so use xmms.
  44  *
  45  *      If you need to force a specific rate set the clocking= option
  46  *
  47  */
  48
  49 #include <linux/module.h>
  50 #include <linux/string.h>
  51 #include <linux/ctype.h>
  52 #include <linux/ioport.h>
  53 #include <linux/sched.h>
  54 #include <linux/delay.h>
  55 #include <linux/sound.h>
  56 #include <linux/slab.h>
  57 #include <linux/soundcard.h>
  58 #include <linux/pci.h>
  59 #include <asm/io.h>
  60 #include <asm/dma.h>
  61 #include <linux/init.h>
  62 #include <linux/poll.h>
  63 #include <linux/spinlock.h>
  64 #include <linux/smp_lock.h>
  65 #include <linux/ac97_codec.h>
  66 #include <linux/interrupt.h>
  67 #include <asm/uaccess.h>
  68
  69 #ifndef PCI_DEVICE_ID_ALI_5455
  70 #define PCI_DEVICE_ID_ALI_5455  0x5455
  71 #endif
  72
  73 #ifndef PCI_VENDOR_ID_ALI
  74 #define PCI_VENDOR_ID_ALI       0x10b9
  75 #endif
  76
  77 static int strict_clocking = 0;
  78 static unsigned int clocking = 0;
  79 static unsigned int codec_pcmout_share_spdif_locked = 0;
  80 static unsigned int codec_independent_spdif_locked = 0;
  81 static unsigned int controller_pcmout_share_spdif_locked = 0;
  82 static unsigned int controller_independent_spdif_locked = 0;
  83 static unsigned int globel = 0;
  84
  85 #define ADC_RUNNING     1
  86 #define DAC_RUNNING     2
  87 #define CODEC_SPDIFOUT_RUNNING 8
  88 #define CONTROLLER_SPDIFOUT_RUNNING 4
  89
  90 #define SPDIF_ENABLE_OUTPUT     4       /* bits 0,1 are PCM */
  91
  92 #define ALI5455_FMT_16BIT       1
  93 #define ALI5455_FMT_STEREO      2
  94 #define ALI5455_FMT_MASK        3
  95
  96 #define SPDIF_ON        0x0004
  97 #define SURR_ON         0x0010
  98 #define CENTER_LFE_ON   0x0020
  99 #define VOL_MUTED       0x8000
 100
 101
 102 #define ALI_SPDIF_OUT_CH_STATUS 0xbf
 103 /* the 810's array of pointers to data buffers */
 104
 105 struct sg_item {
 106 #define BUSADDR_MASK    0xFFFFFFFE
 107         u32 busaddr;
 108 #define CON_IOC         0x80000000      /* interrupt on completion */
 109 #define CON_BUFPAD      0x40000000      /* pad underrun with last sample, else 0 */
 110 #define CON_BUFLEN_MASK 0x0000ffff      /* buffer length in samples */
 111         u32 control;
 112 };
 113
 114 /* an instance of the ali channel */
 115 #define SG_LEN 32
 116 struct ali_channel {
 117         /* these sg guys should probably be allocated
 118            separately as nocache. Must be 8 byte aligned */
 119         struct sg_item sg[SG_LEN];      /* 32*8 */
 120         u32 offset;             /* 4 */
 121         u32 port;               /* 4 */
 122         u32 used;
 123         u32 num;
 124 };
 125
 126 /*
 127  * we have 3 separate dma engines.  pcm in, pcm out, and mic.
 128  * each dma engine has controlling registers.  These goofy
 129  * names are from the datasheet, but make it easy to write
 130  * code while leafing through it.
 131  */
 132
 133 #define ENUM_ENGINE(PRE,DIG)                                                                    \
 134 enum {                                                                                          \
 135         PRE##_BDBAR =   0x##DIG##0,             /* Buffer Descriptor list Base Address */       \
 136         PRE##_CIV =     0x##DIG##4,             /* Current Index Value */                       \
 137         PRE##_LVI =     0x##DIG##5,             /* Last Valid Index */                          \
 138         PRE##_SR =      0x##DIG##6,             /* Status Register */                           \
 139         PRE##_PICB =    0x##DIG##8,             /* Position In Current Buffer */                \
 140         PRE##_CR =      0x##DIG##b              /* Control Register */                          \
 141 }
 142
 143 ENUM_ENGINE(OFF, 0);            /* Offsets */
 144 ENUM_ENGINE(PI, 4);             /* PCM In */
 145 ENUM_ENGINE(PO, 5);             /* PCM Out */
 146 ENUM_ENGINE(MC, 6);             /* Mic In */
 147 ENUM_ENGINE(CODECSPDIFOUT, 7);  /* CODEC SPDIF OUT  */
 148 ENUM_ENGINE(CONTROLLERSPDIFIN, A);      /* CONTROLLER SPDIF In */
 149 ENUM_ENGINE(CONTROLLERSPDIFOUT, B);     /* CONTROLLER SPDIF OUT */
 150
 151
 152 enum {
 153         ALI_SCR = 0x00,         /* System Control Register */
 154         ALI_SSR = 0x04,         /* System Status Register  */
 155         ALI_DMACR = 0x08,       /* DMA Control Register    */
 156         ALI_FIFOCR1 = 0x0c,     /* FIFO Control Register 1  */
 157         ALI_INTERFACECR = 0x10, /* Interface Control Register */
 158         ALI_INTERRUPTCR = 0x14, /* Interrupt control Register */
 159         ALI_INTERRUPTSR = 0x18, /* Interrupt  Status Register */
 160         ALI_FIFOCR2 = 0x1c,     /* FIFO Control Register 2   */
 161         ALI_CPR = 0x20,         /* Command Port Register     */
 162         ALI_SPR = 0x24,         /* Status Port Register      */
 163         ALI_FIFOCR3 = 0x2c,     /* FIFO Control Register 3  */
 164         ALI_TTSR = 0x30,        /* Transmit Tag Slot Register */
 165         ALI_RTSR = 0x34,        /* Receive Tag Slot  Register */
 166         ALI_CSPSR = 0x38,       /* Command/Status Port Status Register */
 167         ALI_CAS = 0x3c,         /* Codec Write Semaphore Register */
 168         ALI_SPDIFCSR = 0xf8,    /* spdif channel status register  */
 169         ALI_SPDIFICS = 0xfc     /* spdif interface control/status  */
 170 };
 171
 172 // x-status register(x:pcm in ,pcm out, mic in,)
 173 /* interrupts for a dma engine */
 174 #define DMA_INT_FIFO            (1<<4)  /* fifo under/over flow */
 175 #define DMA_INT_COMPLETE        (1<<3)  /* buffer read/write complete and ioc set */
 176 #define DMA_INT_LVI             (1<<2)  /* last valid done */
 177 #define DMA_INT_CELV            (1<<1)  /* last valid is current */
 178 #define DMA_INT_DCH             (1)     /* DMA Controller Halted (happens on LVI interrupts) */ //not eqult intel
 179 #define DMA_INT_MASK (DMA_INT_FIFO|DMA_INT_COMPLETE|DMA_INT_LVI)
 180
 181 /* interrupts for the whole chip */// by interrupt status register finish
 182
 183 #define INT_SPDIFOUT   (1<<23)  /* controller spdif out INTERRUPT */
 184 #define INT_SPDIFIN   (1<<22)
 185 #define INT_CODECSPDIFOUT   (1<<19)
 186 #define INT_MICIN   (1<<18)
 187 #define INT_PCMOUT   (1<<17)
 188 #define INT_PCMIN   (1<<16)
 189 #define INT_CPRAIS   (1<<7)
 190 #define INT_SPRAIS   (1<<5)
 191 #define INT_GPIO    (1<<1)
 192 #define INT_MASK   (INT_SPDIFOUT|INT_CODECSPDIFOUT|INT_MICIN|INT_PCMOUT|INT_PCMIN)
 193
 194 #define DRIVER_VERSION "0.02ac"
 195
 196 /* magic numbers to protect our data structures */
 197 #define ALI5455_CARD_MAGIC              0x5072696E      /* "Prin" */
 198 #define ALI5455_STATE_MAGIC             0x63657373      /* "cess" */
 199 #define ALI5455_DMA_MASK                0xffffffff      /* DMA buffer mask for pci_alloc_consist */
 200 #define NR_HW_CH                        5       //I think 5 channel
 201
 202 /* maxinum number of AC97 codecs connected, AC97 2.0 defined 4 */
 203 #define NR_AC97         2
 204
 205 /* Please note that an 8bit mono stream is not valid on this card, you must have a 16bit */
 206 /* stream at a minimum for this card to be happy */
 207 static const unsigned sample_size[] = { 1, 2, 2, 4 };
 208 /* Samples are 16bit values, so we are shifting to a word, not to a byte, hence shift */
 209 /* values are one less than might be expected */
 210 static const unsigned sample_shift[] = { -1, 0, 0, 1 };
 211
 212 #define ALI5455
 213 static char *card_names[] = {
 214         "ALI 5455"
 215 };
 216
 217 static struct pci_device_id ali_pci_tbl[] = {
 218         {PCI_VENDOR_ID_ALI, PCI_DEVICE_ID_ALI_5455,
 219          PCI_ANY_ID, PCI_ANY_ID, 0, 0, ALI5455},
 220         {0,}
 221 };
 222
 223 MODULE_DEVICE_TABLE(pci, ali_pci_tbl);
 224
 225 #ifdef CONFIG_PM
 226 #define PM_SUSPENDED(card) (card->pm_suspended)
 227 #else
 228 #define PM_SUSPENDED(card) (0)
 229 #endif
 230
 231 /* "software" or virtual channel, an instance of opened /dev/dsp */
 232 struct ali_state {
 233         unsigned int magic;
 234         struct ali_card *card;  /* Card info */
 235
 236         /* single open lock mechanism, only used for recording */
 237         struct semaphore open_sem;
 238         wait_queue_head_t open_wait;
 239
 240         /* file mode */
 241         mode_t open_mode;
 242
 243         /* virtual channel number */
 244         int virt;
 245
 246 #ifdef CONFIG_PM
 247         unsigned int pm_saved_dac_rate, pm_saved_adc_rate;
 248 #endif
 249         struct dmabuf {
 250                 /* wave sample stuff */
 251                 unsigned int rate;
 252                 unsigned char fmt, enable, trigger;
 253
 254                 /* hardware channel */
 255                 struct ali_channel *read_channel;
 256                 struct ali_channel *write_channel;
 257                 struct ali_channel *codec_spdifout_channel;
 258                 struct ali_channel *controller_spdifout_channel;
 259
 260                 /* OSS buffer management stuff */
 261                 void *rawbuf;
 262                 dma_addr_t dma_handle;
 263                 unsigned buforder;
 264                 unsigned numfrag;
 265                 unsigned fragshift;
 266
 267                 /* our buffer acts like a circular ring */
 268                 unsigned hwptr; /* where dma last started, updated by update_ptr */
 269                 unsigned swptr; /* where driver last clear/filled, updated by read/write */
 270                 int count;      /* bytes to be consumed or been generated by dma machine */
 271                 unsigned total_bytes;   /* total bytes dmaed by hardware */
 272
 273                 unsigned error; /* number of over/underruns */
 274                 wait_queue_head_t wait; /* put process on wait queue when no more space in buffer */
 275
 276                 /* redundant, but makes calculations easier */
 277                 /* what the hardware uses */
 278                 unsigned dmasize;
 279                 unsigned fragsize;
 280                 unsigned fragsamples;
 281
 282                 /* what we tell the user to expect */
 283                 unsigned userfrags;
 284                 unsigned userfragsize;
 285
 286                 /* OSS stuff */
 287                 unsigned mapped:1;
 288                 unsigned ready:1;
 289                 unsigned update_flag;
 290                 unsigned ossfragsize;
 291                 unsigned ossmaxfrags;
 292                 unsigned subdivision;
 293         } dmabuf;
 294 };
 295
 296
 297 struct ali_card {
 298         struct ali_channel channel[5];
 299         unsigned int magic;
 300
 301         /* We keep ali5455 cards in a linked list */
 302         struct ali_card *next;
 303
 304         /* The ali has a certain amount of cross channel interaction
 305            so we use a single per card lock */
 306         spinlock_t lock;
 307         spinlock_t ac97_lock;
 308
 309         /* PCI device stuff */
 310         struct pci_dev *pci_dev;
 311         u16 pci_id;
 312 #ifdef CONFIG_PM
 313         u16 pm_suspended;
 314         int pm_saved_mixer_settings[SOUND_MIXER_NRDEVICES][NR_AC97];
 315 #endif
 316         /* soundcore stuff */
 317         int dev_audio;
 318
 319         /* structures for abstraction of hardware facilities, codecs, banks and channels */
 320         struct ac97_codec *ac97_codec[NR_AC97];
 321         struct ali_state *states[NR_HW_CH];
 322
 323         u16 ac97_features;
 324         u16 ac97_status;
 325         u16 channels;
 326
 327         /* hardware resources */
 328         unsigned long iobase;
 329
 330         u32 irq;
 331
 332         /* Function support */
 333         struct ali_channel *(*alloc_pcm_channel) (struct ali_card *);
 334         struct ali_channel *(*alloc_rec_pcm_channel) (struct ali_card *);
 335         struct ali_channel *(*alloc_rec_mic_channel) (struct ali_card *);
 336         struct ali_channel *(*alloc_codec_spdifout_channel) (struct ali_card *);
 337         struct ali_channel *(*alloc_controller_spdifout_channel) (struct  ali_card *);
 338         void (*free_pcm_channel) (struct ali_card *, int chan);
 339
 340         /* We have a *very* long init time possibly, so use this to block */
 341         /* attempts to open our devices before we are ready (stops oops'es) */
 342         int initializing;
 343 };
 344
 345
 346 static struct ali_card *devs = NULL;
 347
 348 static int ali_open_mixdev(struct inode *inode, struct file *file);
 349 static int ali_ioctl_mixdev(struct inode *inode, struct file *file,
 350                             unsigned int cmd, unsigned long arg);
 351 static u16 ali_ac97_get(struct ac97_codec *dev, u8 reg);
 352 static void ali_ac97_set(struct ac97_codec *dev, u8 reg, u16 data);
 353
 354 static struct ali_channel *ali_alloc_pcm_channel(struct ali_card *card)
 355 {
 356         if (card->channel[1].used == 1)
 357                 return NULL;
 358         card->channel[1].used = 1;
 359         return &card->channel[1];
 360 }
 361
 362 static struct ali_channel *ali_alloc_rec_pcm_channel(struct ali_card *card)
 363 {
 364         if (card->channel[0].used == 1)
 365                 return NULL;
 366         card->channel[0].used = 1;
 367         return &card->channel[0];
 368 }
 369
 370 static struct ali_channel *ali_alloc_rec_mic_channel(struct ali_card *card)
 371 {
 372         if (card->channel[2].used == 1)
 373                 return NULL;
 374         card->channel[2].used = 1;
 375         return &card->channel[2];
 376 }
 377
 378 static struct ali_channel *ali_alloc_codec_spdifout_channel(struct ali_card *card)
 379 {
 380         if (card->channel[3].used == 1)
 381                 return NULL;
 382         card->channel[3].used = 1;
 383         return &card->channel[3];
 384 }
 385
 386 static struct ali_channel *ali_alloc_controller_spdifout_channel(struct ali_card *card)
 387 {
 388         if (card->channel[4].used == 1)
 389                 return NULL;
 390         card->channel[4].used = 1;
 391         return &card->channel[4];
 392 }
 393 static void ali_free_pcm_channel(struct ali_card *card, int channel)
 394 {
 395         card->channel[channel].used = 0;
 396 }
 397
 398
 399 //add support  codec spdif out
 400 static int ali_valid_spdif_rate(struct ac97_codec *codec, int rate)
 401 {
 402         unsigned long id = 0L;
 403
 404         id = (ali_ac97_get(codec, AC97_VENDOR_ID1) << 16);
 405         id |= ali_ac97_get(codec, AC97_VENDOR_ID2) & 0xffff;
 406         switch (id) {
 407         case 0x41445361:        /* AD1886 */
 408                 if (rate == 48000) {
 409                         return 1;
 410                 }
 411                 break;
 412         case 0x414c4720:        /* ALC650 */
 413                 if (rate == 48000) {
 414                         return 1;
 415                 }
 416                 break;
 417         default:                /* all other codecs, until we know otherwiae */
 418                 if (rate == 48000 || rate == 44100 || rate == 32000) {
 419                         return 1;
 420                 }
 421                 break;
 422         }
 423         return (0);
 424 }
 425
 426 /* ali_set_spdif_output
 427  *
 428  *  Configure the S/PDIF output transmitter. When we turn on
 429  *  S/PDIF, we turn off the analog output. This may not be
 430  *  the right thing to do.
 431  *
 432  *  Assumptions:
 433  *     The DSP sample rate must already be set to a supported
 434  *     S/PDIF rate (32kHz, 44.1kHz, or 48kHz) or we abort.
 435  */
 436 static void ali_set_spdif_output(struct ali_state *state, int slots,
 437                                  int rate)
 438 {
 439         int vol;
 440         int aud_reg;
 441         struct ac97_codec *codec = state->card->ac97_codec[0];
 442
 443         if (!(state->card->ac97_features & 4)) {
 444                 state->card->ac97_status &= ~SPDIF_ON;
 445         } else {
 446                 if (slots == -1) {      /* Turn off S/PDIF */
 447                         aud_reg = ali_ac97_get(codec, AC97_EXTENDED_STATUS);
 448                         ali_ac97_set(codec, AC97_EXTENDED_STATUS, (aud_reg & ~AC97_EA_SPDIF));
 449
 450                         /* If the volume wasn't muted before we turned on S/PDIF, unmute it */
 451                         if (!(state->card->ac97_status & VOL_MUTED)) {
 452                                 aud_reg = ali_ac97_get(codec, AC97_MASTER_VOL_STEREO);
 453                                 ali_ac97_set(codec, AC97_MASTER_VOL_STEREO,
 454                                              (aud_reg & ~VOL_MUTED));
 455                         }
 456                         state->card->ac97_status &= ~(VOL_MUTED | SPDIF_ON);
 457                         return;
 458                 }
 459
 460                 vol = ali_ac97_get(codec, AC97_MASTER_VOL_STEREO);
 461                 state->card->ac97_status = vol & VOL_MUTED;
 462
 463                 /* Set S/PDIF transmitter sample rate */
 464                 aud_reg = ali_ac97_get(codec, AC97_SPDIF_CONTROL);
 465                 switch (rate) {
 466                 case 32000:
 467                         aud_reg = (aud_reg & AC97_SC_SPSR_MASK) | AC97_SC_SPSR_32K;
 468                         break;
 469                 case 44100:
 470                         aud_reg = (aud_reg & AC97_SC_SPSR_MASK) | AC97_SC_SPSR_44K;
 471                         break;
 472                 case 48000:
 473                         aud_reg = (aud_reg & AC97_SC_SPSR_MASK) | AC97_SC_SPSR_48K;
 474                         break;
 475                 default:
 476                         /* turn off S/PDIF */
 477                         aud_reg = ali_ac97_get(codec, AC97_EXTENDED_STATUS);
 478                         ali_ac97_set(codec, AC97_EXTENDED_STATUS, (aud_reg & ~AC97_EA_SPDIF));
 479                         state->card->ac97_status &= ~SPDIF_ON;
 480                         return;
 481                 }
 482
 483                 ali_ac97_set(codec, AC97_SPDIF_CONTROL, aud_reg);
 484
 485                 aud_reg = ali_ac97_get(codec, AC97_EXTENDED_STATUS);
 486                 aud_reg = (aud_reg & AC97_EA_SLOT_MASK) | slots | AC97_EA_SPDIF;
 487                 ali_ac97_set(codec, AC97_EXTENDED_STATUS, aud_reg);
 488
 489                 aud_reg = ali_ac97_get(codec, AC97_POWER_CONTROL);
 490                 aud_reg |= 0x0002;
 491                 ali_ac97_set(codec, AC97_POWER_CONTROL, aud_reg);
 492                 udelay(1);
 493
 494                 state->card->ac97_status |= SPDIF_ON;
 495
 496                 /* Check to make sure the configuration is valid */
 497                 aud_reg = ali_ac97_get(codec, AC97_EXTENDED_STATUS);
 498                 if (!(aud_reg & 0x0400)) {
 499                         /* turn off S/PDIF */
 500                         ali_ac97_set(codec, AC97_EXTENDED_STATUS, (aud_reg & ~AC97_EA_SPDIF));
 501                         state->card->ac97_status &= ~SPDIF_ON;
 502                         return;
 503                 }
 504                 if (codec_independent_spdif_locked > 0) {
 505                         aud_reg = ali_ac97_get(codec, 0x6a);
 506                         ali_ac97_set(codec, 0x6a, (aud_reg & 0xefff));
 507                 }
 508                 /* Mute the analog output */
 509                 /* Should this only mute the PCM volume??? */
 510         }
 511 }
 512
 513 /* ali_set_dac_channels
 514  *
 515  *  Configure the codec's multi-channel DACs
 516  *
 517  *  The logic is backwards. Setting the bit to 1 turns off the DAC.
 518  *
 519  *  What about the ICH? We currently configure it using the
 520  *  SNDCTL_DSP_CHANNELS ioctl.  If we're turnning on the DAC,
 521  *  does that imply that we want the ICH set to support
 522  *  these channels?
 523  *
 524  *  TODO:
 525  *    vailidate that the codec really supports these DACs
 526  *    before turning them on.
 527  */
 528 static void ali_set_dac_channels(struct ali_state *state, int channel)
 529 {
 530         int aud_reg;
 531         struct ac97_codec *codec = state->card->ac97_codec[0];
 532
 533         aud_reg = ali_ac97_get(codec, AC97_EXTENDED_STATUS);
 534         aud_reg |= AC97_EA_PRI | AC97_EA_PRJ | AC97_EA_PRK;
 535         state->card->ac97_status &= ~(SURR_ON | CENTER_LFE_ON);
 536
 537         switch (channel) {
 538         case 2:         /* always enabled */
 539                 break;
 540         case 4:
 541                 aud_reg &= ~AC97_EA_PRJ;
 542                 state->card->ac97_status |= SURR_ON;
 543                 break;
 544         case 6:
 545                 aud_reg &= ~(AC97_EA_PRJ | AC97_EA_PRI | AC97_EA_PRK);
 546                 state->card->ac97_status |= SURR_ON | CENTER_LFE_ON;
 547                 break;
 548         default:
 549                 break;
 550         }
 551         ali_ac97_set(codec, AC97_EXTENDED_STATUS, aud_reg);
 552
 553 }
 554
 555 /* set playback sample rate */
 556 static unsigned int ali_set_dac_rate(struct ali_state *state,
 557                                      unsigned int rate)
 558 {
 559         struct dmabuf *dmabuf = &state->dmabuf;
 560         u32 new_rate;
 561         struct ac97_codec *codec = state->card->ac97_codec[0];
 562
 563         if (!(state->card->ac97_features & 0x0001)) {
 564                 dmabuf->rate = clocking;
 565                 return clocking;
 566         }
 567
 568         if (rate > 48000)
 569                 rate = 48000;
 570         if (rate < 8000)
 571                 rate = 8000;
 572         dmabuf->rate = rate;
 573
 574         /*
 575          *      Adjust for misclocked crap
 576          */
 577
 578         rate = (rate * clocking) / 48000;
 579
 580         if (strict_clocking && rate < 8000) {
 581                 rate = 8000;
 582                 dmabuf->rate = (rate * 48000) / clocking;
 583         }
 584
 585         new_rate = ac97_set_dac_rate(codec, rate);
 586         if (new_rate != rate) {
 587                 dmabuf->rate = (new_rate * 48000) / clocking;
 588         }
 589         rate = new_rate;
 590         return dmabuf->rate;
 591 }
 592
 593 /* set recording sample rate */
 594 static unsigned int ali_set_adc_rate(struct ali_state *state,
 595                                      unsigned int rate)
 596 {
 597         struct dmabuf *dmabuf = &state->dmabuf;
 598         u32 new_rate;
 599         struct ac97_codec *codec = state->card->ac97_codec[0];
 600
 601         if (!(state->card->ac97_features & 0x0001)) {
 602                 dmabuf->rate = clocking;
 603                 return clocking;
 604         }
 605
 606         if (rate > 48000)
 607                 rate = 48000;
 608         if (rate < 8000)
 609                 rate = 8000;
 610         dmabuf->rate = rate;
 611
 612         /*
 613          *      Adjust for misclocked crap
 614          */
 615
 616         rate = (rate * clocking) / 48000;
 617         if (strict_clocking && rate < 8000) {
 618                 rate = 8000;
 619                 dmabuf->rate = (rate * 48000) / clocking;
 620         }
 621
 622         new_rate = ac97_set_adc_rate(codec, rate);
 623
 624         if (new_rate != rate) {
 625                 dmabuf->rate = (new_rate * 48000) / clocking;
 626                 rate = new_rate;
 627         }
 628         return dmabuf->rate;
 629 }
 630
 631 /* set codec independent spdifout sample rate */
 632 static unsigned int ali_set_codecspdifout_rate(struct ali_state *state,
 633                                                unsigned int rate)
 634 {
 635         struct dmabuf *dmabuf = &state->dmabuf;
 636
 637         if (!(state->card->ac97_features & 0x0001)) {
 638                 dmabuf->rate = clocking;
 639                 return clocking;
 640         }
 641
 642         if (rate > 48000)
 643                 rate = 48000;
 644         if (rate < 8000)
 645                 rate = 8000;
 646         dmabuf->rate = rate;
 647
 648         return dmabuf->rate;
 649 }
 650
 651 /* set  controller independent spdif out function sample rate */
 652 static void ali_set_spdifout_rate(struct ali_state *state,
 653                                   unsigned int rate)
 654 {
 655         unsigned char ch_st_sel;
 656         unsigned short status_rate;
 657
 658         switch (rate) {
 659         case 44100:
 660                 status_rate = 0;
 661                 break;
 662         case 32000:
 663                 status_rate = 0x300;
 664                 break;
 665         case 48000:
 666         default:
 667                 status_rate = 0x200;
 668                 break;
 669         }
 670
 671         ch_st_sel = inb(state->card->iobase + ALI_SPDIFICS) & ALI_SPDIF_OUT_CH_STATUS;  //select spdif_out
 672
 673         ch_st_sel |= 0x80;      //select right
 674         outb(ch_st_sel, (state->card->iobase + ALI_SPDIFICS));
 675         outb(status_rate | 0x20, (state->card->iobase + ALI_SPDIFCSR + 2));
 676
 677         ch_st_sel &= (~0x80);   //select left
 678         outb(ch_st_sel, (state->card->iobase + ALI_SPDIFICS));
 679         outw(status_rate | 0x10, (state->card->iobase + ALI_SPDIFCSR + 2));
 680 }
 681
 682 /* get current playback/recording dma buffer pointer (byte offset from LBA),
 683    called with spinlock held! */
 684
 685 static inline unsigned ali_get_dma_addr(struct ali_state *state, int rec)
 686 {
 687         struct dmabuf *dmabuf = &state->dmabuf;
 688         unsigned int civ, offset, port, port_picb;
 689         unsigned int data;
 690
 691         if (!dmabuf->enable)
 692                 return 0;
 693
 694         if (rec == 1)
 695                 port = state->card->iobase + dmabuf->read_channel->port;
 696         else if (rec == 2)
 697                 port = state->card->iobase + dmabuf->codec_spdifout_channel->port;
 698         else if (rec == 3)
 699                 port = state->card->iobase + dmabuf->controller_spdifout_channel->port;
 700         else
 701                 port = state->card->iobase + dmabuf->write_channel->port;
 702
 703         port_picb = port + OFF_PICB;
 704
 705         do {
 706                 civ = inb(port + OFF_CIV) & 31;
 707                 offset = inw(port_picb);
 708                 /* Must have a delay here! */
 709                 if (offset == 0)
 710                         udelay(1);
 711
 712                 /* Reread both registers and make sure that that total
 713                  * offset from the first reading to the second is 0.
 714                  * There is an issue with SiS hardware where it will count
 715                  * picb down to 0, then update civ to the next value,
 716                  * then set the new picb to fragsize bytes.  We can catch
 717                  * it between the civ update and the picb update, making
 718                  * it look as though we are 1 fragsize ahead of where we
 719                  * are.  The next to we get the address though, it will
 720                  * be back in thdelay is more than long enough
 721                  * that we won't have to worry about the chip still being
 722                  * out of sync with reality ;-)
 723                  */
 724         } while (civ != (inb(port + OFF_CIV) & 31) || offset != inw(port_picb));
 725
 726         data = ((civ + 1) * dmabuf->fragsize - (2 * offset)) % dmabuf->dmasize;
 727         if (inw(port_picb) == 0)
 728                 data -= 2048;
 729
 730         return data;
 731 }
 732
 733 /* Stop recording (lock held) */
 734 static inline void __stop_adc(struct ali_state *state)
 735 {
 736         struct dmabuf *dmabuf = &state->dmabuf;
 737         struct ali_card *card = state->card;
 738
 739         dmabuf->enable &= ~ADC_RUNNING;
 740
 741         outl((1 << 18) | (1 << 16), card->iobase + ALI_DMACR);
 742         udelay(1);
 743
 744         outb(0, card->iobase + PI_CR);
 745         while (inb(card->iobase + PI_CR) != 0);
 746
 747         // now clear any latent interrupt bits (like the halt bit)
 748         outb(inb(card->iobase + PI_SR) | 0x001e, card->iobase + PI_SR);
 749         outl(inl(card->iobase + ALI_INTERRUPTSR) & INT_PCMIN, card->iobase + ALI_INTERRUPTSR);
 750 }
 751
 752 static void stop_adc(struct ali_state *state)
 753 {
 754         struct ali_card *card = state->card;
 755         unsigned long flags;
 756         spin_lock_irqsave(&card->lock, flags);
 757         __stop_adc(state);
 758         spin_unlock_irqrestore(&card->lock, flags);
 759 }
 760
 761 static inline void __start_adc(struct ali_state *state)
 762 {
 763         struct dmabuf *dmabuf = &state->dmabuf;
 764
 765         if (dmabuf->count < dmabuf->dmasize && dmabuf->ready
 766             && !dmabuf->enable && (dmabuf->trigger & PCM_ENABLE_INPUT)) {
 767                 dmabuf->enable |= ADC_RUNNING;
 768                 outb((1 << 4) | (1 << 2), state->card->iobase + PI_CR);
 769                 if (state->card->channel[0].used == 1)
 770                         outl(1, state->card->iobase + ALI_DMACR);       // DMA CONTROL REGISTRER
 771                 udelay(100);
 772                 if (state->card->channel[2].used == 1)
 773                         outl((1 << 2), state->card->iobase + ALI_DMACR);        //DMA CONTROL REGISTER
 774                 udelay(100);
 775         }
 776 }
 777
 778 static void start_adc(struct ali_state *state)
 779 {
 780         struct ali_card *card = state->card;
 781         unsigned long flags;
 782
 783         spin_lock_irqsave(&card->lock, flags);
 784         __start_adc(state);
 785         spin_unlock_irqrestore(&card->lock, flags);
 786 }
 787
 788 /* stop playback (lock held) */
 789 static inline void __stop_dac(struct ali_state *state)
 790 {
 791         struct dmabuf *dmabuf = &state->dmabuf;
 792         struct ali_card *card = state->card;
 793
 794         dmabuf->enable &= ~DAC_RUNNING;
 795         outl(0x00020000, card->iobase + 0x08);
 796         outb(0, card->iobase + PO_CR);
 797         while (inb(card->iobase + PO_CR) != 0)
 798                 cpu_relax();
 799
 800         outb(inb(card->iobase + PO_SR) | 0x001e, card->iobase + PO_SR);
 801
 802         outl(inl(card->iobase + ALI_INTERRUPTSR) & INT_PCMOUT, card->iobase + ALI_INTERRUPTSR);
 803 }
 804
 805 static void stop_dac(struct ali_state *state)
 806 {
 807         struct ali_card *card = state->card;
 808         unsigned long flags;
 809         spin_lock_irqsave(&card->lock, flags);
 810         __stop_dac(state);
 811         spin_unlock_irqrestore(&card->lock, flags);
 812 }
 813
 814 static inline void __start_dac(struct ali_state *state)
 815 {
 816         struct dmabuf *dmabuf = &state->dmabuf;
 817         if (dmabuf->count > 0 && dmabuf->ready && !dmabuf->enable &&
 818             (dmabuf->trigger & PCM_ENABLE_OUTPUT)) {
 819                 dmabuf->enable |= DAC_RUNNING;
 820                 outb((1 << 4) | (1 << 2), state->card->iobase + PO_CR);
 821                 outl((1 << 1), state->card->iobase + 0x08);     //dma control register
 822         }
 823 }
 824
 825 static void start_dac(struct ali_state *state)
 826 {
 827         struct ali_card *card = state->card;
 828         unsigned long flags;
 829         spin_lock_irqsave(&card->lock, flags);
 830         __start_dac(state);
 831         spin_unlock_irqrestore(&card->lock, flags);
 832 }
 833
 834 /* stop codec and controller spdif out  (lock held) */
 835 static inline void __stop_spdifout(struct ali_state *state)
 836 {
 837         struct dmabuf *dmabuf = &state->dmabuf;
 838         struct ali_card *card = state->card;
 839
 840         if (codec_independent_spdif_locked > 0) {
 841                 dmabuf->enable &= ~CODEC_SPDIFOUT_RUNNING;
 842                 outl((1 << 19), card->iobase + 0x08);
 843                 outb(0, card->iobase + CODECSPDIFOUT_CR);
 844
 845                 while (inb(card->iobase + CODECSPDIFOUT_CR) != 0)
 846                         cpu_relax();
 847
 848                 outb(inb(card->iobase + CODECSPDIFOUT_SR) | 0x001e, card->iobase + CODECSPDIFOUT_SR);
 849                 outl(inl(card->iobase + ALI_INTERRUPTSR) & INT_CODECSPDIFOUT, card->iobase + ALI_INTERRUPTSR);
 850         } else {
 851                 if (controller_independent_spdif_locked > 0) {
 852                         dmabuf->enable &= ~CONTROLLER_SPDIFOUT_RUNNING;
 853                         outl((1 << 23), card->iobase + 0x08);
 854                         outb(0, card->iobase + CONTROLLERSPDIFOUT_CR);
 855                         while (inb(card->iobase + CONTROLLERSPDIFOUT_CR) != 0)
 856                                 cpu_relax();
 857                         outb(inb(card->iobase + CONTROLLERSPDIFOUT_SR) | 0x001e, card->iobase + CONTROLLERSPDIFOUT_SR);
 858                         outl(inl(card->iobase + ALI_INTERRUPTSR) & INT_SPDIFOUT, card->iobase + ALI_INTERRUPTSR);
 859                 }
 860         }
 861 }
 862
 863 static void stop_spdifout(struct ali_state *state)
 864 {
 865         struct ali_card *card = state->card;
 866         unsigned long flags;
 867         spin_lock_irqsave(&card->lock, flags);
 868         __stop_spdifout(state);
 869         spin_unlock_irqrestore(&card->lock, flags);
 870 }
 871
 872 static inline void __start_spdifout(struct ali_state *state)
 873 {
 874         struct dmabuf *dmabuf = &state->dmabuf;
 875         if (dmabuf->count > 0 && dmabuf->ready && !dmabuf->enable &&
 876             (dmabuf->trigger & SPDIF_ENABLE_OUTPUT)) {
 877                 if (codec_independent_spdif_locked > 0) {
 878                         dmabuf->enable |= CODEC_SPDIFOUT_RUNNING;
 879                         outb((1 << 4) | (1 << 2), state->card->iobase + CODECSPDIFOUT_CR);
 880                         outl((1 << 3), state->card->iobase + 0x08);     //dma control register
 881                 } else {
 882                         if (controller_independent_spdif_locked > 0) {
 883                                 dmabuf->enable |= CONTROLLER_SPDIFOUT_RUNNING;
 884                                 outb((1 << 4) | (1 << 2), state->card->iobase + CONTROLLERSPDIFOUT_CR);
 885                                 outl((1 << 7), state->card->iobase + 0x08);     //dma control register
 886                         }
 887                 }
 888         }
 889 }
 890
 891 static void start_spdifout(struct ali_state *state)
 892 {
 893         struct ali_card *card = state->card;
 894         unsigned long flags;
 895         spin_lock_irqsave(&card->lock, flags);
 896         __start_spdifout(state);
 897         spin_unlock_irqrestore(&card->lock, flags);
 898 }
 899
 900 #define DMABUF_DEFAULTORDER (16-PAGE_SHIFT)
 901 #define DMABUF_MINORDER 1
 902
 903 /* allocate DMA buffer, playback , recording,spdif out  buffer should be allocated separately */
 904 static int alloc_dmabuf(struct ali_state *state)
 905 {
 906         struct dmabuf *dmabuf = &state->dmabuf;
 907         void *rawbuf = NULL;
 908         int order, size;
 909         struct page *page, *pend;
 910
 911         /* If we don't have any oss frag params, then use our default ones */
 912         if (dmabuf->ossmaxfrags == 0)
 913                 dmabuf->ossmaxfrags = 4;
 914         if (dmabuf->ossfragsize == 0)
 915                 dmabuf->ossfragsize = (PAGE_SIZE << DMABUF_DEFAULTORDER) / dmabuf->ossmaxfrags;
 916         size = dmabuf->ossfragsize * dmabuf->ossmaxfrags;
 917
 918         if (dmabuf->rawbuf && (PAGE_SIZE << dmabuf->buforder) == size)
 919                 return 0;
 920         /* alloc enough to satisfy the oss params */
 921         for (order = DMABUF_DEFAULTORDER; order >= DMABUF_MINORDER; order--) {
 922                 if ((PAGE_SIZE << order) > size)
 923                         continue;
 924                 if ((rawbuf = pci_alloc_consistent(state->card->pci_dev,
 925                                                    PAGE_SIZE << order,
 926                                                    &dmabuf->dma_handle)))
 927                         break;
 928         }
 929         if (!rawbuf)
 930                 return -ENOMEM;
 931
 932         dmabuf->ready = dmabuf->mapped = 0;
 933         dmabuf->rawbuf = rawbuf;
 934         dmabuf->buforder = order;
 935
 936         /* now mark the pages as reserved; otherwise remap_pfn_range doesn't do what we want */
 937         pend = virt_to_page(rawbuf + (PAGE_SIZE << order) - 1);
 938         for (page = virt_to_page(rawbuf); page <= pend; page++)
 939                 SetPageReserved(page);
 940         return 0;
 941 }
 942
 943 /* free DMA buffer */
 944 static void dealloc_dmabuf(struct ali_state *state)
 945 {
 946         struct dmabuf *dmabuf = &state->dmabuf;
 947         struct page *page, *pend;
 948
 949         if (dmabuf->rawbuf) {
 950                 /* undo marking the pages as reserved */
 951                 pend = virt_to_page(dmabuf->rawbuf + (PAGE_SIZE << dmabuf->buforder) - 1);
 952                 for (page = virt_to_page(dmabuf->rawbuf); page <= pend; page++)
 953                         ClearPageReserved(page);
 954                 pci_free_consistent(state->card->pci_dev,
 955                                     PAGE_SIZE << dmabuf->buforder,
 956                                     dmabuf->rawbuf, dmabuf->dma_handle);
 957         }
 958         dmabuf->rawbuf = NULL;
 959         dmabuf->mapped = dmabuf->ready = 0;
 960 }
 961
 962 static int prog_dmabuf(struct ali_state *state, unsigned rec)
 963 {
 964         struct dmabuf *dmabuf = &state->dmabuf;
 965         struct ali_channel *c = NULL;
 966         struct sg_item *sg;
 967         unsigned long flags;
 968         int ret;
 969         unsigned fragint;
 970         int i;
 971
 972         spin_lock_irqsave(&state->card->lock, flags);
 973         if (dmabuf->enable & DAC_RUNNING)
 974                 __stop_dac(state);
 975         if (dmabuf->enable & ADC_RUNNING)
 976                 __stop_adc(state);
 977         if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING)
 978                 __stop_spdifout(state);
 979         if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING)
 980                 __stop_spdifout(state);
 981
 982         dmabuf->total_bytes = 0;
 983         dmabuf->count = dmabuf->error = 0;
 984         dmabuf->swptr = dmabuf->hwptr = 0;
 985         spin_unlock_irqrestore(&state->card->lock, flags);
 986
 987         /* allocate DMA buffer, let alloc_dmabuf determine if we are already
 988          * allocated well enough or if we should replace the current buffer
 989          * (assuming one is already allocated, if it isn't, then allocate it).
 990          */
 991         if ((ret = alloc_dmabuf(state)))
 992                 return ret;
 993
 994         /* FIXME: figure out all this OSS fragment stuff */
 995         /* I did, it now does what it should according to the OSS API.  DL */
 996         /* We may not have realloced our dmabuf, but the fragment size to
 997          * fragment number ratio may have changed, so go ahead and reprogram
 998          * things
 999          */
1000
1001         dmabuf->dmasize = PAGE_SIZE << dmabuf->buforder;
1002         dmabuf->numfrag = SG_LEN;
1003         dmabuf->fragsize = dmabuf->dmasize / dmabuf->numfrag;
1004         dmabuf->fragsamples = dmabuf->fragsize >> 1;
1005         dmabuf->userfragsize = dmabuf->ossfragsize;
1006         dmabuf->userfrags = dmabuf->dmasize / dmabuf->ossfragsize;
1007
1008         memset(dmabuf->rawbuf, 0, dmabuf->dmasize);
1009
1010         if (dmabuf->ossmaxfrags == 4) {
1011                 fragint = 8;
1012                 dmabuf->fragshift = 2;
1013         } else if (dmabuf->ossmaxfrags == 8) {
1014                 fragint = 4;
1015                 dmabuf->fragshift = 3;
1016         } else if (dmabuf->ossmaxfrags == 16) {
1017                 fragint = 2;
1018                 dmabuf->fragshift = 4;
1019         } else {
1020                 fragint = 1;
1021                 dmabuf->fragshift = 5;
1022         }
1023         /*
1024          *      Now set up the ring
1025          */
1026
1027         if (rec == 1)
1028                 c = dmabuf->read_channel;
1029         else if (rec == 2)
1030                 c = dmabuf->codec_spdifout_channel;
1031         else if (rec == 3)
1032                 c = dmabuf->controller_spdifout_channel;
1033         else if (rec == 0)
1034                 c = dmabuf->write_channel;
1035         if (c != NULL) {
1036                 sg = &c->sg[0];
1037                 /*
1038                  *      Load up 32 sg entries and take an interrupt at half
1039                  *      way (we might want more interrupts later..)
1040                  */
1041                 for (i = 0; i < dmabuf->numfrag; i++) {
1042                         sg->busaddr =
1043                             virt_to_bus(dmabuf->rawbuf +
1044                                         dmabuf->fragsize * i);
1045                         // the card will always be doing 16bit stereo
1046                         sg->control = dmabuf->fragsamples;
1047                         sg->control |= CON_BUFPAD;      //I modify
1048                         // set us up to get IOC interrupts as often as needed to
1049                         // satisfy numfrag requirements, no more
1050                         if (((i + 1) % fragint) == 0) {
1051                                 sg->control |= CON_IOC;
1052                         }
1053                         sg++;
1054                 }
1055                 spin_lock_irqsave(&state->card->lock, flags);
1056                 outb(2, state->card->iobase + c->port + OFF_CR);        /* reset DMA machine */
1057                 outl(virt_to_bus(&c->sg[0]), state->card->iobase + c->port + OFF_BDBAR);
1058                 outb(0, state->card->iobase + c->port + OFF_CIV);
1059                 outb(0, state->card->iobase + c->port + OFF_LVI);
1060                 spin_unlock_irqrestore(&state->card->lock, flags);
1061         }
1062         /* set the ready flag for the dma buffer */
1063         dmabuf->ready = 1;
1064         return 0;
1065 }
1066
1067 static void __ali_update_lvi(struct ali_state *state, int rec)
1068 {
1069         struct dmabuf *dmabuf = &state->dmabuf;
1070         int x, port;
1071         port = state->card->iobase;
1072         if (rec == 1)
1073                 port += dmabuf->read_channel->port;
1074         else if (rec == 2)
1075                 port += dmabuf->codec_spdifout_channel->port;
1076         else if (rec == 3)
1077                 port += dmabuf->controller_spdifout_channel->port;
1078         else if (rec == 0)
1079                 port += dmabuf->write_channel->port;
1080         /* if we are currently stopped, then our CIV is actually set to our
1081          * *last* sg segment and we are ready to wrap to the next.  However,
1082          * if we set our LVI to the last sg segment, then it won't wrap to
1083          * the next sg segment, it won't even get a start.  So, instead, when
1084          * we are stopped, we set both the LVI value and also we increment
1085          * the CIV value to the next sg segment to be played so that when
1086          * we call start_{dac,adc}, things will operate properly
1087          */
1088         if (!dmabuf->enable && dmabuf->ready) {
1089                 if (rec && dmabuf->count < dmabuf->dmasize && (dmabuf->trigger & PCM_ENABLE_INPUT)) {
1090                         outb((inb(port + OFF_CIV) + 1) & 31, port + OFF_LVI);
1091                         __start_adc(state);
1092                         while (! (inb(port + OFF_CR) & ((1 << 4) | (1 << 2))))
1093                                 cpu_relax();
1094                 } else if (!rec && dmabuf->count && (dmabuf->trigger & PCM_ENABLE_OUTPUT)) {
1095                         outb((inb(port + OFF_CIV) + 1) & 31, port + OFF_LVI);
1096                         __start_dac(state);
1097                         while (!(inb(port + OFF_CR) & ((1 << 4) | (1 << 2))))
1098                                 cpu_relax();
1099                 } else if (rec && dmabuf->count && (dmabuf->trigger & SPDIF_ENABLE_OUTPUT)) {
1100                         if (codec_independent_spdif_locked > 0) {
1101                                 // outb((inb(port+OFF_CIV))&31, port+OFF_LVI);
1102                                 outb((inb(port + OFF_CIV) + 1) & 31, port + OFF_LVI);
1103                                 __start_spdifout(state);
1104                                 while (!(inb(port + OFF_CR) & ((1 << 4) | (1 << 2))))
1105                                         cpu_relax();
1106                         } else {
1107                                 if (controller_independent_spdif_locked > 0) {
1108                                         outb((inb(port + OFF_CIV) + 1) & 31, port + OFF_LVI);
1109                                         __start_spdifout(state);
1110                                         while (!(inb(port + OFF_CR) & ((1 << 4) | (1 << 2))))
1111                                                 cpu_relax();
1112                                 }
1113                         }
1114                 }
1115         }
1116
1117         /* swptr - 1 is the tail of our transfer */
1118         x = (dmabuf->dmasize + dmabuf->swptr - 1) % dmabuf->dmasize;
1119         x /= dmabuf->fragsize;
1120         outb(x, port + OFF_LVI);
1121 }
1122
1123 static void ali_update_lvi(struct ali_state *state, int rec)
1124 {
1125         struct dmabuf *dmabuf = &state->dmabuf;
1126         unsigned long flags;
1127         if (!dmabuf->ready)
1128                 return;
1129         spin_lock_irqsave(&state->card->lock, flags);
1130         __ali_update_lvi(state, rec);
1131         spin_unlock_irqrestore(&state->card->lock, flags);
1132 }
1133
1134 /* update buffer manangement pointers, especially, dmabuf->count and dmabuf->hwptr */
1135 static void ali_update_ptr(struct ali_state *state)
1136 {
1137         struct dmabuf *dmabuf = &state->dmabuf;
1138         unsigned hwptr;
1139         int diff;
1140
1141         /* error handling and process wake up for DAC */
1142         if (dmabuf->enable == ADC_RUNNING) {
1143                 /* update hardware pointer */
1144                 hwptr = ali_get_dma_addr(state, 1);
1145                 diff = (dmabuf->dmasize + hwptr - dmabuf->hwptr) % dmabuf->dmasize;
1146                 dmabuf->hwptr = hwptr;
1147                 dmabuf->total_bytes += diff;
1148                 dmabuf->count += diff;
1149                 if (dmabuf->count > dmabuf->dmasize) {
1150                         /* buffer underrun or buffer overrun */
1151                         /* this is normal for the end of a read */
1152                         /* only give an error if we went past the */
1153                         /* last valid sg entry */
1154                         if ((inb(state->card->iobase + PI_CIV) & 31) != (inb(state->card->iobase + PI_LVI) & 31)) {
1155                                 printk(KERN_WARNING "ali_audio: DMA overrun on read\n");
1156                                 dmabuf->error++;
1157                         }
1158                 }
1159                 if (dmabuf->count > dmabuf->userfragsize)
1160                         wake_up(&dmabuf->wait);
1161         }
1162         /* error handling and process wake up for DAC */
1163         if (dmabuf->enable == DAC_RUNNING) {
1164                 /* update hardware pointer */
1165                 hwptr = ali_get_dma_addr(state, 0);
1166                 diff =
1167                     (dmabuf->dmasize + hwptr -
1168                      dmabuf->hwptr) % dmabuf->dmasize;
1169 #if defined(DEBUG_INTERRUPTS) || defined(DEBUG_MMAP)
1170                 printk("DAC HWP %d,%d,%d\n", hwptr, dmabuf->hwptr, diff);
1171 #endif
1172                 dmabuf->hwptr = hwptr;
1173                 dmabuf->total_bytes += diff;
1174                 dmabuf->count -= diff;
1175                 if (dmabuf->count < 0) {
1176                         /* buffer underrun or buffer overrun */
1177                         /* this is normal for the end of a write */
1178                         /* only give an error if we went past the */
1179                         /* last valid sg entry */
1180                         if ((inb(state->card->iobase + PO_CIV) & 31) != (inb(state->card->iobase + PO_LVI) & 31)) {
1181                                 printk(KERN_WARNING "ali_audio: DMA overrun on write\n");
1182                                 printk(KERN_DEBUG "ali_audio: CIV %d, LVI %d, hwptr %x, count %d\n",
1183                                                         inb(state->card->iobase + PO_CIV) & 31,
1184                                                         inb(state->card->iobase + PO_LVI) & 31,
1185                                                         dmabuf->hwptr,
1186                                                         dmabuf->count);
1187                                 dmabuf->error++;
1188                         }
1189                 }
1190                 if (dmabuf->count < (dmabuf->dmasize - dmabuf->userfragsize))
1191                         wake_up(&dmabuf->wait);
1192         }
1193
1194         /* error handling and process wake up for CODEC SPDIF OUT */
1195         if (dmabuf->enable == CODEC_SPDIFOUT_RUNNING) {
1196                 /* update hardware pointer */
1197                 hwptr = ali_get_dma_addr(state, 2);
1198                 diff = (dmabuf->dmasize + hwptr - dmabuf->hwptr) % dmabuf->dmasize;
1199                 dmabuf->hwptr = hwptr;
1200                 dmabuf->total_bytes += diff;
1201                 dmabuf->count -= diff;
1202                 if (dmabuf->count < 0) {
1203                         /* buffer underrun or buffer overrun */
1204                         /* this is normal for the end of a write */
1205                         /* only give an error if we went past the */
1206                         /* last valid sg entry */
1207                         if ((inb(state->card->iobase + CODECSPDIFOUT_CIV) & 31) != (inb(state->card->iobase + CODECSPDIFOUT_LVI) & 31)) {
1208                                 printk(KERN_WARNING "ali_audio: DMA overrun on write\n");
1209                                 printk(KERN_DEBUG "ali_audio: CIV %d, LVI %d, hwptr %x, count %d\n",
1210                                         inb(state->card->iobase + CODECSPDIFOUT_CIV) & 31,
1211                                         inb(state->card->iobase + CODECSPDIFOUT_LVI) & 31,
1212                                         dmabuf->hwptr, dmabuf->count);
1213                                 dmabuf->error++;
1214                         }
1215                 }
1216                 if (dmabuf->count < (dmabuf->dmasize - dmabuf->userfragsize))
1217                         wake_up(&dmabuf->wait);
1218         }
1219         /* error handling and process wake up for CONTROLLER SPDIF OUT */
1220         if (dmabuf->enable == CONTROLLER_SPDIFOUT_RUNNING) {
1221                 /* update hardware pointer */
1222                 hwptr = ali_get_dma_addr(state, 3);
1223                 diff = (dmabuf->dmasize + hwptr - dmabuf->hwptr) % dmabuf->dmasize;
1224                 dmabuf->hwptr = hwptr;
1225                 dmabuf->total_bytes += diff;
1226                 dmabuf->count -= diff;
1227                 if (dmabuf->count < 0) {
1228                         /* buffer underrun or buffer overrun */
1229                         /* this is normal for the end of a write */
1230                         /* only give an error if we went past the */
1231                         /* last valid sg entry */
1232                         if ((inb(state->card->iobase + CONTROLLERSPDIFOUT_CIV) & 31) != (inb(state->card->iobase + CONTROLLERSPDIFOUT_LVI) & 31)) {
1233                                 printk(KERN_WARNING
1234                                        "ali_audio: DMA overrun on write\n");
1235                                 printk("ali_audio: CIV %d, LVI %d, hwptr %x, "
1236                                         "count %d\n",
1237                                                 inb(state->card->iobase + CONTROLLERSPDIFOUT_CIV) & 31,
1238                                                 inb(state->card->iobase + CONTROLLERSPDIFOUT_LVI) & 31,
1239                                                 dmabuf->hwptr, dmabuf->count);
1240                                 dmabuf->error++;
1241                         }
1242                 }
1243                 if (dmabuf->count < (dmabuf->dmasize - dmabuf->userfragsize))
1244                         wake_up(&dmabuf->wait);
1245         }
1246 }
1247
1248 static inline int ali_get_free_write_space(struct
1249                                            ali_state
1250                                            *state)
1251 {
1252         struct dmabuf *dmabuf = &state->dmabuf;
1253         int free;
1254
1255         if (dmabuf->count < 0) {
1256                 dmabuf->count = 0;
1257                 dmabuf->swptr = dmabuf->hwptr;
1258         }
1259         free = dmabuf->dmasize - dmabuf->swptr;
1260         if ((dmabuf->count + free) > dmabuf->dmasize){
1261                 free = dmabuf->dmasize - dmabuf->count;
1262         }
1263         return free;
1264 }
1265
1266 static inline int ali_get_available_read_data(struct
1267                                               ali_state
1268                                               *state)
1269 {
1270         struct dmabuf *dmabuf = &state->dmabuf;
1271         int avail;
1272         ali_update_ptr(state);
1273         // catch overruns during record
1274         if (dmabuf->count > dmabuf->dmasize) {
1275                 dmabuf->count = dmabuf->dmasize;
1276                 dmabuf->swptr = dmabuf->hwptr;
1277         }
1278         avail = dmabuf->count;
1279         avail -= (dmabuf->hwptr % dmabuf->fragsize);
1280         if (avail < 0)
1281                 return (0);
1282         return (avail);
1283 }
1284
1285 static int drain_dac(struct ali_state *state, int signals_allowed)
1286 {
1287
1288         DECLARE_WAITQUEUE(wait, current);
1289         struct dmabuf *dmabuf = &state->dmabuf;
1290         unsigned long flags;
1291         unsigned long tmo;
1292         int count;
1293         if (!dmabuf->ready)
1294                 return 0;
1295         if (dmabuf->mapped) {
1296                 stop_dac(state);
1297                 return 0;
1298         }
1299         add_wait_queue(&dmabuf->wait, &wait);
1300         for (;;) {
1301
1302                 spin_lock_irqsave(&state->card->lock, flags);
1303                 ali_update_ptr(state);
1304                 count = dmabuf->count;
1305                 spin_unlock_irqrestore(&state->card->lock, flags);
1306                 if (count <= 0)
1307                         break;
1308                 /*
1309                  * This will make sure that our LVI is correct, that our
1310                  * pointer is updated, and that the DAC is running.  We
1311                  * have to force the setting of dmabuf->trigger to avoid
1312                  * any possible deadlocks.
1313                  */
1314                 if (!dmabuf->enable) {
1315                         dmabuf->trigger = PCM_ENABLE_OUTPUT;
1316                         ali_update_lvi(state, 0);
1317                 }
1318                 if (signal_pending(current) && signals_allowed) {
1319                         break;
1320                 }
1321
1322                 /* It seems that we have to set the current state to
1323                  * TASK_INTERRUPTIBLE every time to make the process
1324                  * really go to sleep.  This also has to be *after* the
1325                  * update_ptr() call because update_ptr is likely to
1326                  * do a wake_up() which will unset this before we ever
1327                  * try to sleep, resuling in a tight loop in this code
1328                  * instead of actually sleeping and waiting for an
1329                  * interrupt to wake us up!
1330                  */
1331                 set_current_state(TASK_INTERRUPTIBLE);
1332                 /*
1333                  * set the timeout to significantly longer than it *should*
1334                  * take for the DAC to drain the DMA buffer
1335                  */
1336                 tmo = (count * HZ) / (dmabuf->rate);
1337                 if (!schedule_timeout(tmo >= 2 ? tmo : 2)) {
1338                         printk(KERN_ERR "ali_audio: drain_dac, dma timeout?\n");
1339                         count = 0;
1340                         break;
1341                 }
1342         }
1343         set_current_state(TASK_RUNNING);
1344         remove_wait_queue(&dmabuf->wait, &wait);
1345         if (count > 0 && signal_pending(current) && signals_allowed)
1346                 return -ERESTARTSYS;
1347         stop_dac(state);
1348         return 0;
1349 }
1350
1351
1352 static int drain_spdifout(struct ali_state *state, int signals_allowed)
1353 {
1354
1355         DECLARE_WAITQUEUE(wait, current);
1356         struct dmabuf *dmabuf = &state->dmabuf;
1357         unsigned long flags;
1358         unsigned long tmo;
1359         int count;
1360         if (!dmabuf->ready)
1361                 return 0;
1362         if (dmabuf->mapped) {
1363                 stop_spdifout(state);
1364                 return 0;
1365         }
1366         add_wait_queue(&dmabuf->wait, &wait);
1367         for (;;) {
1368
1369                 spin_lock_irqsave(&state->card->lock, flags);
1370                 ali_update_ptr(state);
1371                 count = dmabuf->count;
1372                 spin_unlock_irqrestore(&state->card->lock, flags);
1373                 if (count <= 0)
1374                         break;
1375                 /*
1376                  * This will make sure that our LVI is correct, that our
1377                  * pointer is updated, and that the DAC is running.  We
1378                  * have to force the setting of dmabuf->trigger to avoid
1379                  * any possible deadlocks.
1380                  */
1381                 if (!dmabuf->enable) {
1382                         if (codec_independent_spdif_locked > 0) {
1383                                 dmabuf->trigger = SPDIF_ENABLE_OUTPUT;
1384                                 ali_update_lvi(state, 2);
1385                         } else {
1386                                 if (controller_independent_spdif_locked > 0) {
1387                                         dmabuf->trigger = SPDIF_ENABLE_OUTPUT;
1388                                         ali_update_lvi(state, 3);
1389                                 }
1390                         }
1391                 }
1392                 if (signal_pending(current) && signals_allowed) {
1393                         break;
1394                 }
1395
1396                 /* It seems that we have to set the current state to
1397                  * TASK_INTERRUPTIBLE every time to make the process
1398                  * really go to sleep.  This also has to be *after* the
1399                  * update_ptr() call because update_ptr is likely to
1400                  * do a wake_up() which will unset this before we ever
1401                  * try to sleep, resuling in a tight loop in this code
1402                  * instead of actually sleeping and waiting for an
1403                  * interrupt to wake us up!
1404                  */
1405                 set_current_state(TASK_INTERRUPTIBLE);
1406                 /*
1407                  * set the timeout to significantly longer than it *should*
1408                  * take for the DAC to drain the DMA buffer
1409                  */
1410                 tmo = (count * HZ) / (dmabuf->rate);
1411                 if (!schedule_timeout(tmo >= 2 ? tmo : 2)) {
1412                         printk(KERN_ERR "ali_audio: drain_spdifout, dma timeout?\n");
1413                         count = 0;
1414                         break;
1415                 }
1416         }
1417         set_current_state(TASK_RUNNING);
1418         remove_wait_queue(&dmabuf->wait, &wait);
1419         if (count > 0 && signal_pending(current) && signals_allowed)
1420                 return -ERESTARTSYS;
1421         stop_spdifout(state);
1422         return 0;
1423 }
1424
1425 static void ali_channel_interrupt(struct ali_card *card)
1426 {
1427         int i, count;
1428
1429         for (i = 0; i < NR_HW_CH; i++) {
1430                 struct ali_state *state = card->states[i];
1431                 struct ali_channel *c = NULL;
1432                 struct dmabuf *dmabuf;
1433                 unsigned long port = card->iobase;
1434                 u16 status;
1435                 if (!state)
1436                         continue;
1437                 if (!state->dmabuf.ready)
1438                         continue;
1439                 dmabuf = &state->dmabuf;
1440                 if (codec_independent_spdif_locked > 0) {
1441                         if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING) {
1442                                 c = dmabuf->codec_spdifout_channel;
1443                         }
1444                 } else {
1445                         if (controller_independent_spdif_locked > 0) {
1446                                 if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING)
1447                                         c = dmabuf->controller_spdifout_channel;
1448                         } else {
1449                                 if (dmabuf->enable & DAC_RUNNING) {
1450                                         c = dmabuf->write_channel;
1451                                 } else if (dmabuf->enable & ADC_RUNNING) {
1452                                         c = dmabuf->read_channel;
1453                                 } else
1454                                         continue;
1455                         }
1456                 }
1457                 port += c->port;
1458
1459                 status = inw(port + OFF_SR);
1460
1461                 if (status & DMA_INT_COMPLETE) {
1462                         /* only wake_up() waiters if this interrupt signals
1463                          * us being beyond a userfragsize of data open or
1464                          * available, and ali_update_ptr() does that for
1465                          * us
1466                          */
1467                         ali_update_ptr(state);
1468                 }
1469
1470                 if (status & DMA_INT_LVI) {
1471                         ali_update_ptr(state);
1472                         wake_up(&dmabuf->wait);
1473
1474                         if (dmabuf->enable & DAC_RUNNING)
1475                                 count = dmabuf->count;
1476                         else if (dmabuf->enable & ADC_RUNNING)
1477                                 count = dmabuf->dmasize - dmabuf->count;
1478                         else if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING)
1479                                 count = dmabuf->count;
1480                         else if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING)
1481                                 count = dmabuf->count;
1482                         else count = 0;
1483
1484                         if (count > 0) {
1485                                 if (dmabuf->enable & DAC_RUNNING)
1486                                         outl((1 << 1), state->card->iobase + ALI_DMACR);
1487                                 else if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING)
1488                                                 outl((1 << 3), state->card->iobase + ALI_DMACR);
1489                                 else if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING)
1490                                         outl((1 << 7), state->card->iobase + ALI_DMACR);
1491                         } else {
1492                                 if (dmabuf->enable & DAC_RUNNING)
1493                                         __stop_dac(state);
1494                                 if (dmabuf->enable & ADC_RUNNING)
1495                                         __stop_adc(state);
1496                                 if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING)
1497                                         __stop_spdifout(state);
1498                                 if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING)
1499                                         __stop_spdifout(state);
1500                                 dmabuf->enable = 0;
1501                                 wake_up(&dmabuf->wait);
1502                         }
1503
1504                 }
1505                 if (!(status & DMA_INT_DCH)) {
1506                         ali_update_ptr(state);
1507                         wake_up(&dmabuf->wait);
1508                         if (dmabuf->enable & DAC_RUNNING)
1509                                 count = dmabuf->count;
1510                         else if (dmabuf->enable & ADC_RUNNING)
1511                                 count = dmabuf->dmasize - dmabuf->count;
1512                         else if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING)
1513                                 count = dmabuf->count;
1514                         else if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING)
1515                                 count = dmabuf->count;
1516                         else
1517                                 count = 0;
1518
1519                         if (count > 0) {
1520                                 if (dmabuf->enable & DAC_RUNNING)
1521                                         outl((1 << 1), state->card->iobase + ALI_DMACR);
1522                                 else if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING)
1523                                         outl((1 << 3), state->card->iobase + ALI_DMACR);
1524                                 else if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING)
1525                                         outl((1 << 7), state->card->iobase + ALI_DMACR);
1526                         } else {
1527                                 if (dmabuf->enable & DAC_RUNNING)
1528                                         __stop_dac(state);
1529                                 if (dmabuf->enable & ADC_RUNNING)
1530                                         __stop_adc(state);
1531                                 if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING)
1532                                         __stop_spdifout(state);
1533                                 if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING)
1534                                         __stop_spdifout(state);
1535                                 dmabuf->enable = 0;
1536                                 wake_up(&dmabuf->wait);
1537                         }
1538                 }
1539                 outw(status & DMA_INT_MASK, port + OFF_SR);
1540         }
1541 }
1542
1543 static irqreturn_t ali_interrupt(int irq, void *dev_id, struct pt_regs *regs)
1544 {
1545         struct ali_card *card = (struct ali_card *) dev_id;
1546         u32 status;
1547         u16 status2;
1548
1549         spin_lock(&card->lock);
1550         status = inl(card->iobase + ALI_INTERRUPTSR);
1551         if (!(status & INT_MASK)) {
1552                 spin_unlock(&card->lock);
1553                 return IRQ_NONE;                /* not for us */
1554         }
1555
1556         if (codec_independent_spdif_locked > 0) {
1557                 if (globel == 0) {
1558                         globel += 1;
1559                         status2 = inw(card->iobase + 0x76);
1560                         outw(status2 | 0x000c, card->iobase + 0x76);
1561                 } else {
1562                         if (status & (INT_PCMOUT | INT_PCMIN | INT_MICIN | INT_SPDIFOUT | INT_CODECSPDIFOUT))
1563                                 ali_channel_interrupt(card);
1564                 }
1565         } else {
1566                 if (status & (INT_PCMOUT | INT_PCMIN | INT_MICIN | INT_SPDIFOUT | INT_CODECSPDIFOUT))
1567                         ali_channel_interrupt(card);
1568         }
1569
1570         /* clear 'em */
1571         outl(status & INT_MASK, card->iobase + ALI_INTERRUPTSR);
1572         spin_unlock(&card->lock);
1573         return IRQ_HANDLED;
1574 }
1575
1576 /* in this loop, dmabuf.count signifies the amount of data that is
1577    waiting to be copied to the user's buffer.  It is filled by the dma
1578    machine and drained by this loop. */
1579
1580 static ssize_t ali_read(struct file *file, char __user *buffer,
1581                         size_t count, loff_t * ppos)
1582 {
1583         struct ali_state *state = (struct ali_state *) file->private_data;
1584         struct ali_card *card = state ? state->card : NULL;
1585         struct dmabuf *dmabuf = &state->dmabuf;
1586         ssize_t ret;
1587         unsigned long flags;
1588         unsigned int swptr;
1589         int cnt;
1590         DECLARE_WAITQUEUE(waita, current);
1591 #ifdef DEBUG2
1592         printk("ali_audio: ali_read called, count = %d\n", count);
1593 #endif
1594         if (dmabuf->mapped)
1595                 return -ENXIO;
1596         if (dmabuf->enable & DAC_RUNNING)
1597                 return -ENODEV;
1598         if (!dmabuf->read_channel) {
1599                 dmabuf->ready = 0;
1600                 dmabuf->read_channel = card->alloc_rec_pcm_channel(card);
1601                 if (!dmabuf->read_channel) {
1602                         return -EBUSY;
1603                 }
1604         }
1605         if (!dmabuf->ready && (ret = prog_dmabuf(state, 1)))
1606                 return ret;
1607         if (!access_ok(VERIFY_WRITE, buffer, count))
1608                 return -EFAULT;
1609         ret = 0;
1610         add_wait_queue(&dmabuf->wait, &waita);
1611         while (count > 0) {
1612                 set_current_state(TASK_INTERRUPTIBLE);
1613                 spin_lock_irqsave(&card->lock, flags);
1614                 if (PM_SUSPENDED(card)) {
1615                         spin_unlock_irqrestore(&card->lock, flags);
1616                         schedule();
1617                         if (signal_pending(current)) {
1618                                 if (!ret)
1619                                         ret = -EAGAIN;
1620                                 break;
1621                         }
1622                         continue;
1623                 }
1624                 swptr = dmabuf->swptr;
1625                 cnt = ali_get_available_read_data(state);
1626                 // this is to make the copy_to_user simpler below
1627                 if (cnt > (dmabuf->dmasize - swptr))
1628                         cnt = dmabuf->dmasize - swptr;
1629                 spin_unlock_irqrestore(&card->lock, flags);
1630                 if (cnt > count)
1631                         cnt = count;
1632                 /* Lop off the last two bits to force the code to always
1633                  * write in full samples.  This keeps software that sets
1634                  * O_NONBLOCK but doesn't check the return value of the
1635                  * write call from getting things out of state where they
1636                  * think a full 4 byte sample was written when really only
1637                  * a portion was, resulting in odd sound and stereo
1638                  * hysteresis.
1639                  */
1640                 cnt &= ~0x3;
1641                 if (cnt <= 0) {
1642                         unsigned long tmo;
1643                         /*
1644                          * Don't let us deadlock.  The ADC won't start if
1645                          * dmabuf->trigger isn't set.  A call to SETTRIGGER
1646                          * could have turned it off after we set it to on
1647                          * previously.
1648                          */
1649                         dmabuf->trigger = PCM_ENABLE_INPUT;
1650                         /*
1651                          * This does three things.  Updates LVI to be correct,
1652                          * makes sure the ADC is running, and updates the
1653                          * hwptr.
1654                          */
1655                         ali_update_lvi(state, 1);
1656                         if (file->f_flags & O_NONBLOCK) {
1657                                 if (!ret)
1658                                         ret = -EAGAIN;
1659                                 goto done;
1660                         }
1661                         /* Set the timeout to how long it would take to fill
1662                          * two of our buffers.  If we haven't been woke up
1663                          * by then, then we know something is wrong.
1664                          */
1665                         tmo = (dmabuf->dmasize * HZ * 2) / (dmabuf->rate * 4);
1666
1667                         /* There are two situations when sleep_on_timeout returns, one is when
1668                            the interrupt is serviced correctly and the process is waked up by
1669                            ISR ON TIME. Another is when timeout is expired, which means that
1670                            either interrupt is NOT serviced correctly (pending interrupt) or it
1671                            is TOO LATE for the process to be scheduled to run (scheduler latency)
1672                            which results in a (potential) buffer overrun. And worse, there is
1673                            NOTHING we can do to prevent it. */
1674                         if (!schedule_timeout(tmo >= 2 ? tmo : 2)) {
1675                                 printk(KERN_ERR
1676                                        "ali_audio: recording schedule timeout, "
1677                                        "dmasz %u fragsz %u count %i hwptr %u swptr %u\n",
1678                                        dmabuf->dmasize, dmabuf->fragsize,
1679                                        dmabuf->count, dmabuf->hwptr,
1680                                        dmabuf->swptr);
1681                                 /* a buffer overrun, we delay the recovery until next time the
1682                                    while loop begin and we REALLY have space to record */
1683                         }
1684                         if (signal_pending(current)) {
1685                                 ret = ret ? ret : -ERESTARTSYS;
1686                                 goto done;
1687                         }
1688                         continue;
1689                 }
1690
1691                 if (copy_to_user(buffer, dmabuf->rawbuf + swptr, cnt)) {
1692                         if (!ret)
1693                                 ret = -EFAULT;
1694                         goto done;
1695                 }
1696
1697                 swptr = (swptr + cnt) % dmabuf->dmasize;
1698                 spin_lock_irqsave(&card->lock, flags);
1699                 if (PM_SUSPENDED(card)) {
1700                         spin_unlock_irqrestore(&card->lock, flags);
1701                         continue;
1702                 }
1703                 dmabuf->swptr = swptr;
1704                 dmabuf->count -= cnt;
1705                 spin_unlock_irqrestore(&card->lock, flags);
1706                 count -= cnt;
1707                 buffer += cnt;
1708                 ret += cnt;
1709         }
1710 done:
1711         ali_update_lvi(state, 1);
1712         set_current_state(TASK_RUNNING);
1713         remove_wait_queue(&dmabuf->wait, &waita);
1714         return ret;
1715 }
1716
1717 /* in this loop, dmabuf.count signifies the amount of data that is waiting to be dma to
1718    the soundcard.  it is drained by the dma machine and filled by this loop. */
1719 static ssize_t ali_write(struct file *file,
1720                          const char __user *buffer, size_t count, loff_t * ppos)
1721 {
1722         struct ali_state *state = (struct ali_state *) file->private_data;
1723         struct ali_card *card = state ? state->card : NULL;
1724         struct dmabuf *dmabuf = &state->dmabuf;
1725         ssize_t ret;
1726         unsigned long flags;
1727         unsigned int swptr = 0;
1728         int cnt, x;
1729         DECLARE_WAITQUEUE(waita, current);
1730 #ifdef DEBUG2
1731         printk("ali_audio: ali_write called, count = %d\n", count);
1732 #endif
1733         if (dmabuf->mapped)
1734                 return -ENXIO;
1735         if (dmabuf->enable & ADC_RUNNING)
1736                 return -ENODEV;
1737         if (codec_independent_spdif_locked > 0) {
1738                 if (!dmabuf->codec_spdifout_channel) {
1739                         dmabuf->ready = 0;
1740                         dmabuf->codec_spdifout_channel = card->alloc_codec_spdifout_channel(card);
1741                         if (!dmabuf->codec_spdifout_channel)
1742                                 return -EBUSY;
1743                 }
1744         } else {
1745                 if (controller_independent_spdif_locked > 0) {
1746                         if (!dmabuf->controller_spdifout_channel) {
1747                                 dmabuf->ready = 0;
1748                                 dmabuf->controller_spdifout_channel = card->alloc_controller_spdifout_channel(card);
1749                                 if (!dmabuf->controller_spdifout_channel)
1750                                         return -EBUSY;
1751                         }
1752                 } else {
1753                         if (!dmabuf->write_channel) {
1754                                 dmabuf->ready = 0;
1755                                 dmabuf->write_channel =
1756                                     card->alloc_pcm_channel(card);
1757                                 if (!dmabuf->write_channel)
1758                                         return -EBUSY;
1759                         }
1760                 }
1761         }
1762
1763         if (codec_independent_spdif_locked > 0) {
1764                 if (!dmabuf->ready && (ret = prog_dmabuf(state, 2)))
1765                         return ret;
1766         } else {
1767                 if (controller_independent_spdif_locked > 0) {
1768                         if (!dmabuf->ready && (ret = prog_dmabuf(state, 3)))
1769                                 return ret;
1770                 } else {
1771
1772                         if (!dmabuf->ready && (ret = prog_dmabuf(state, 0)))
1773                                 return ret;
1774                 }
1775         }
1776         if (!access_ok(VERIFY_READ, buffer, count))
1777                 return -EFAULT;
1778         ret = 0;
1779         add_wait_queue(&dmabuf->wait, &waita);
1780         while (count > 0) {
1781                 set_current_state(TASK_INTERRUPTIBLE);
1782                 spin_lock_irqsave(&state->card->lock, flags);
1783                 if (PM_SUSPENDED(card)) {
1784                         spin_unlock_irqrestore(&card->lock, flags);
1785                         schedule();
1786                         if (signal_pending(current)) {
1787                                 if (!ret)
1788                                         ret = -EAGAIN;
1789                                 break;
1790                         }
1791                         continue;
1792                 }
1793
1794                 swptr = dmabuf->swptr;
1795                 cnt = ali_get_free_write_space(state);
1796                 /* Bound the maximum size to how much we can copy to the
1797                  * dma buffer before we hit the end.  If we have more to
1798                  * copy then it will get done in a second pass of this
1799                  * loop starting from the beginning of the buffer.
1800                  */
1801                 if (cnt > (dmabuf->dmasize - swptr))
1802                         cnt = dmabuf->dmasize - swptr;
1803                 spin_unlock_irqrestore(&state->card->lock, flags);
1804 #ifdef DEBUG2
1805                 printk(KERN_INFO
1806                        "ali_audio: ali_write: %d bytes available space\n",
1807                        cnt);
1808 #endif
1809                 if (cnt > count)
1810                         cnt = count;
1811                 /* Lop off the last two bits to force the code to always
1812                  * write in full samples.  This keeps software that sets
1813                  * O_NONBLOCK but doesn't check the return value of the
1814                  * write call from getting things out of state where they
1815                  * think a full 4 byte sample was written when really only
1816                  * a portion was, resulting in odd sound and stereo
1817                  * hysteresis.
1818                  */
1819                 cnt &= ~0x3;
1820                 if (cnt <= 0) {
1821                         unsigned long tmo;
1822                         // There is data waiting to be played
1823                         /*
1824                          * Force the trigger setting since we would
1825                          * deadlock with it set any other way
1826                          */
1827                         if (codec_independent_spdif_locked > 0) {
1828                                 dmabuf->trigger = SPDIF_ENABLE_OUTPUT;
1829                                 ali_update_lvi(state, 2);
1830                         } else {
1831                                 if (controller_independent_spdif_locked > 0) {
1832                                         dmabuf->trigger = SPDIF_ENABLE_OUTPUT;
1833                                         ali_update_lvi(state, 3);
1834                                 } else {
1835
1836                                         dmabuf->trigger = PCM_ENABLE_OUTPUT;
1837                                         ali_update_lvi(state, 0);
1838                                 }
1839                         }
1840                         if (file->f_flags & O_NONBLOCK) {
1841                                 if (!ret)
1842                                         ret = -EAGAIN;
1843                                 goto ret;
1844                         }
1845                         /* Not strictly correct but works */
1846                         tmo = (dmabuf->dmasize * HZ * 2) / (dmabuf->rate * 4);
1847                         /* There are two situations when sleep_on_timeout returns, one is when
1848                            the interrupt is serviced correctly and the process is waked up by
1849                            ISR ON TIME. Another is when timeout is expired, which means that
1850                            either interrupt is NOT serviced correctly (pending interrupt) or it
1851                            is TOO LATE for the process to be scheduled to run (scheduler latency)
1852                            which results in a (potential) buffer underrun. And worse, there is
1853                            NOTHING we can do to prevent it. */
1854
1855                         /* FIXME - do timeout handling here !! */
1856                         schedule_timeout(tmo >= 2 ? tmo : 2);
1857
1858                         if (signal_pending(current)) {
1859                                 if (!ret)
1860                                         ret = -ERESTARTSYS;
1861                                 goto ret;
1862                         }
1863                         continue;
1864                 }
1865                 if (copy_from_user(dmabuf->rawbuf + swptr, buffer, cnt)) {
1866                         if (!ret)
1867                                 ret = -EFAULT;
1868                         goto ret;
1869                 }
1870
1871                 swptr = (swptr + cnt) % dmabuf->dmasize;
1872                 spin_lock_irqsave(&state->card->lock, flags);
1873                 if (PM_SUSPENDED(card)) {
1874                         spin_unlock_irqrestore(&card->lock, flags);
1875                         continue;
1876                 }
1877
1878                 dmabuf->swptr = swptr;
1879                 dmabuf->count += cnt;
1880                 count -= cnt;
1881                 buffer += cnt;
1882                 ret += cnt;
1883                 spin_unlock_irqrestore(&state->card->lock, flags);
1884         }
1885         if (swptr % dmabuf->fragsize) {
1886                 x = dmabuf->fragsize - (swptr % dmabuf->fragsize);
1887                 memset(dmabuf->rawbuf + swptr, '\0', x);
1888         }
1889 ret:
1890         if (codec_independent_spdif_locked > 0) {
1891                 ali_update_lvi(state, 2);
1892         } else {
1893                 if (controller_independent_spdif_locked > 0) {
1894                         ali_update_lvi(state, 3);
1895                 } else {
1896                         ali_update_lvi(state, 0);
1897                 }
1898         }
1899         set_current_state(TASK_RUNNING);
1900         remove_wait_queue(&dmabuf->wait, &waita);
1901         return ret;
1902 }
1903
1904 /* No kernel lock - we have our own spinlock */
1905 static unsigned int ali_poll(struct file *file, struct poll_table_struct
1906                              *wait)
1907 {
1908         struct ali_state *state = (struct ali_state *) file->private_data;
1909         struct dmabuf *dmabuf = &state->dmabuf;
1910         unsigned long flags;
1911         unsigned int mask = 0;
1912         if (!dmabuf->ready)
1913                 return 0;
1914         poll_wait(file, &dmabuf->wait, wait);
1915         spin_lock_irqsave(&state->card->lock, flags);
1916         ali_update_ptr(state);
1917         if (file->f_mode & FMODE_READ && dmabuf->enable & ADC_RUNNING) {
1918                 if (dmabuf->count >= (signed) dmabuf->fragsize)
1919                         mask |= POLLIN | POLLRDNORM;
1920         }
1921         if (file->f_mode & FMODE_WRITE  && (dmabuf->enable & (DAC_RUNNING|CODEC_SPDIFOUT_RUNNING|CONTROLLER_SPDIFOUT_RUNNING))) {
1922                 if ((signed) dmabuf->dmasize >= dmabuf->count + (signed) dmabuf->fragsize)
1923                         mask |= POLLOUT | POLLWRNORM;
1924         }
1925         spin_unlock_irqrestore(&state->card->lock, flags);
1926         return mask;
1927 }
1928
1929 static int ali_mmap(struct file *file, struct vm_area_struct *vma)
1930 {
1931         struct ali_state *state = (struct ali_state *) file->private_data;
1932         struct dmabuf *dmabuf = &state->dmabuf;
1933         int ret = -EINVAL;
1934         unsigned long size;
1935         lock_kernel();
1936         if (vma->vm_flags & VM_WRITE) {
1937                 if (!dmabuf->write_channel && (dmabuf->write_channel = state->card->alloc_pcm_channel(state->card)) == NULL) {
1938                         ret = -EBUSY;
1939                         goto out;
1940                 }
1941         }
1942         if (vma->vm_flags & VM_READ) {
1943                 if (!dmabuf->read_channel && (dmabuf->read_channel = state->card->alloc_rec_pcm_channel(state->card)) == NULL) {
1944                         ret = -EBUSY;
1945                         goto out;
1946                 }
1947         }
1948         if ((ret = prog_dmabuf(state, 0)) != 0)
1949                 goto out;
1950         ret = -EINVAL;
1951         if (vma->vm_pgoff != 0)
1952                 goto out;
1953         size = vma->vm_end - vma->vm_start;
1954         if (size > (PAGE_SIZE << dmabuf->buforder))
1955                 goto out;
1956         ret = -EAGAIN;
1957         if (remap_pfn_range(vma, vma->vm_start,
1958                                 virt_to_phys(dmabuf->rawbuf) >> PAGE_SHIFT,
1959                                 size, vma->vm_page_prot))
1960                 goto out;
1961         dmabuf->mapped = 1;
1962         dmabuf->trigger = 0;
1963         ret = 0;
1964 out:
1965         unlock_kernel();
1966         return ret;
1967 }
1968
1969 static int ali_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
1970 {
1971         struct ali_state *state = (struct ali_state *) file->private_data;
1972         struct ali_channel *c = NULL;
1973         struct dmabuf *dmabuf = &state->dmabuf;
1974         unsigned long flags;
1975         audio_buf_info abinfo;
1976         count_info cinfo;
1977         unsigned int i_scr;
1978         int val = 0, ret;
1979         struct ac97_codec *codec = state->card->ac97_codec[0];
1980         void __user *argp = (void __user *)arg;
1981         int __user *p = argp;
1982
1983 #ifdef DEBUG
1984         printk("ali_audio: ali_ioctl, arg=0x%x, cmd=",
1985                arg ? *p : 0);
1986 #endif
1987         switch (cmd) {
1988         case OSS_GETVERSION:
1989 #ifdef DEBUG
1990                 printk("OSS_GETVERSION\n");
1991 #endif
1992                 return put_user(SOUND_VERSION, p);
1993         case SNDCTL_DSP_RESET:
1994 #ifdef DEBUG
1995                 printk("SNDCTL_DSP_RESET\n");
1996 #endif
1997                 spin_lock_irqsave(&state->card->lock, flags);
1998                 if (dmabuf->enable == DAC_RUNNING) {
1999                         c = dmabuf->write_channel;
2000                         __stop_dac(state);
2001                 }
2002                 if (dmabuf->enable == ADC_RUNNING) {
2003                         c = dmabuf->read_channel;
2004                         __stop_adc(state);
2005                 }
2006                 if (dmabuf->enable == CODEC_SPDIFOUT_RUNNING) {
2007                         c = dmabuf->codec_spdifout_channel;
2008                         __stop_spdifout(state);
2009                 }
2010                 if (dmabuf->enable == CONTROLLER_SPDIFOUT_RUNNING) {
2011                         c = dmabuf->controller_spdifout_channel;
2012                         __stop_spdifout(state);
2013                 }
2014                 if (c != NULL) {
2015                         outb(2, state->card->iobase + c->port + OFF_CR);        /* reset DMA machine */
2016                         outl(virt_to_bus(&c->sg[0]),
2017                              state->card->iobase + c->port + OFF_BDBAR);
2018                         outb(0, state->card->iobase + c->port + OFF_CIV);
2019                         outb(0, state->card->iobase + c->port + OFF_LVI);
2020                 }
2021
2022                 spin_unlock_irqrestore(&state->card->lock, flags);
2023                 synchronize_irq(state->card->pci_dev->irq);
2024                 dmabuf->ready = 0;
2025                 dmabuf->swptr = dmabuf->hwptr = 0;
2026                 dmabuf->count = dmabuf->total_bytes = 0;
2027                 return 0;
2028         case SNDCTL_DSP_SYNC:
2029 #ifdef DEBUG
2030                 printk("SNDCTL_DSP_SYNC\n");
2031 #endif
2032                 if (codec_independent_spdif_locked > 0) {
2033                         if (dmabuf->enable != CODEC_SPDIFOUT_RUNNING
2034                             || file->f_flags & O_NONBLOCK)
2035                                 return 0;
2036                         if ((val = drain_spdifout(state, 1)))
2037                                 return val;
2038                 } else {
2039                         if (controller_independent_spdif_locked > 0) {
2040                                 if (dmabuf->enable !=
2041                                     CONTROLLER_SPDIFOUT_RUNNING
2042                                     || file->f_flags & O_NONBLOCK)
2043                                         return 0;
2044                                 if ((val = drain_spdifout(state, 1)))
2045                                         return val;
2046                         } else {
2047                                 if (dmabuf->enable != DAC_RUNNING
2048                                     || file->f_flags & O_NONBLOCK)
2049                                         return 0;
2050                                 if ((val = drain_dac(state, 1)))
2051                                         return val;
2052                         }
2053                 }
2054                 dmabuf->total_bytes = 0;
2055                 return 0;
2056         case SNDCTL_DSP_SPEED:  /* set smaple rate */
2057 #ifdef DEBUG
2058                 printk("SNDCTL_DSP_SPEED\n");
2059 #endif
2060                 if (get_user(val, p))
2061                         return -EFAULT;
2062                 if (val >= 0) {
2063                         if (file->f_mode & FMODE_WRITE) {
2064                                 if ((state->card->ac97_status & SPDIF_ON)) {    /* S/PDIF Enabled */
2065                                         /* RELTEK ALC650 only support 48000, need to check that */
2066                                         if (ali_valid_spdif_rate(codec, val)) {
2067                                                 if (codec_independent_spdif_locked > 0) {
2068                                                         ali_set_spdif_output(state, -1, 0);
2069                                                         stop_spdifout(state);
2070                                                         dmabuf->ready = 0;
2071                                                         /* I add test codec independent spdif out */
2072                                                         spin_lock_irqsave(&state->card->lock, flags);
2073                                                         ali_set_codecspdifout_rate(state, val); // I modified
2074                                                         spin_unlock_irqrestore(&state->card->lock, flags);
2075                                                         /* Set S/PDIF transmitter rate. */
2076                                                         i_scr = inl(state->card->iobase + ALI_SCR);
2077                                                         if ((i_scr & 0x00300000) == 0x00100000) {
2078                                                                 ali_set_spdif_output(state, AC97_EA_SPSA_7_8, codec_independent_spdif_locked);
2079                                                         } else {
2080                                                                 if ((i_scr&0x00300000)  == 0x00200000)
2081                                                                 {
2082                                                                         ali_set_spdif_output(state, AC97_EA_SPSA_6_9, codec_independent_spdif_locked);
2083                                                                 } else {
2084                                                                         if ((i_scr & 0x00300000) == 0x00300000) {
2085                                                                                 ali_set_spdif_output(state, AC97_EA_SPSA_10_11, codec_independent_spdif_locked);
2086                                                                         } else {
2087                                                                                 ali_set_spdif_output(state, AC97_EA_SPSA_7_8, codec_independent_spdif_locked);
2088                                                                         }
2089                                                                 }
2090                                                         }
2091
2092                                                         if (!(state->card->ac97_status & SPDIF_ON)) {
2093                                                                 val = dmabuf->rate;
2094                                                         }
2095                                                 } else {
2096                                                         if (controller_independent_spdif_locked > 0)
2097                                                         {
2098                                                                 stop_spdifout(state);
2099                                                                 dmabuf->ready = 0;
2100                                                                 spin_lock_irqsave(&state->card->lock, flags);
2101                                                                 ali_set_spdifout_rate(state, controller_independent_spdif_locked);
2102                                                                 spin_unlock_irqrestore(&state->card->lock, flags);
2103                                                         } else {
2104                                                                 /* Set DAC rate */
2105                                                                 ali_set_spdif_output(state, -1, 0);
2106                                                                 stop_dac(state);
2107                                                                 dmabuf->ready = 0;
2108                                                                 spin_lock_irqsave(&state->card->lock, flags);
2109                                                                 ali_set_dac_rate(state, val);
2110                                                                 spin_unlock_irqrestore(&state->card->lock, flags);
2111                                                                 /* Set S/PDIF transmitter rate. */
2112                                                                 ali_set_spdif_output(state, AC97_EA_SPSA_3_4, val);
2113                                                                 if (!(state->card->ac97_status & SPDIF_ON))
2114                                                                 {
2115                                                                         val = dmabuf->rate;
2116                                                                 }
2117                                                         }
2118                                                 }
2119                                         } else {        /* Not a valid rate for S/PDIF, ignore it */
2120                                                 val = dmabuf->rate;
2121                                         }
2122                                 } else {
2123                                         stop_dac(state);
2124                                         dmabuf->ready = 0;
2125                                         spin_lock_irqsave(&state->card->lock, flags);
2126                                         ali_set_dac_rate(state, val);
2127                                         spin_unlock_irqrestore(&state->card->lock, flags);
2128                                 }
2129                         }
2130                         if (file->f_mode & FMODE_READ) {
2131                                 stop_adc(state);
2132                                 dmabuf->ready = 0;
2133                                 spin_lock_irqsave(&state->card->lock, flags);
2134                                 ali_set_adc_rate(state, val);
2135                                 spin_unlock_irqrestore(&state->card->lock, flags);
2136                         }
2137                 }
2138                 return put_user(dmabuf->rate, p);
2139         case SNDCTL_DSP_STEREO: /* set stereo or mono channel */
2140 #ifdef DEBUG
2141                 printk("SNDCTL_DSP_STEREO\n");
2142 #endif
2143                 if (dmabuf->enable & DAC_RUNNING) {
2144                         stop_dac(state);
2145                 }
2146                 if (dmabuf->enable & ADC_RUNNING) {
2147                         stop_adc(state);
2148                 }
2149                 if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING) {
2150                         stop_spdifout(state);
2151                 }
2152                 if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING) {
2153                         stop_spdifout(state);
2154                 }
2155                 return put_user(1, p);
2156         case SNDCTL_DSP_GETBLKSIZE:
2157                 if (file->f_mode & FMODE_WRITE) {
2158                         if (codec_independent_spdif_locked > 0) {
2159                                 if (!dmabuf->ready && (val = prog_dmabuf(state, 2)))
2160                                         return val;
2161                         } else {
2162                                 if (controller_independent_spdif_locked > 0) {
2163                                         if (!dmabuf->ready && (val = prog_dmabuf(state, 3)))
2164                                                 return val;
2165                                 } else {
2166                                         if (!dmabuf->ready && (val = prog_dmabuf(state, 0)))
2167                                                 return val;
2168                                 }
2169                         }
2170                 }
2171
2172                 if (file->f_mode & FMODE_READ) {
2173                         if (!dmabuf->ready && (val = prog_dmabuf(state, 1)))
2174                                 return val;
2175                 }
2176 #ifdef DEBUG
2177                 printk("SNDCTL_DSP_GETBLKSIZE %d\n", dmabuf->userfragsize);
2178 #endif
2179                 return put_user(dmabuf->userfragsize, p);
2180         case SNDCTL_DSP_GETFMTS:        /* Returns a mask of supported sample format */
2181 #ifdef DEBUG
2182                 printk("SNDCTL_DSP_GETFMTS\n");
2183 #endif
2184                 return put_user(AFMT_S16_LE, p);
2185         case SNDCTL_DSP_SETFMT: /* Select sample format */
2186 #ifdef DEBUG
2187                 printk("SNDCTL_DSP_SETFMT\n");
2188 #endif
2189                 return put_user(AFMT_S16_LE, p);
2190         case SNDCTL_DSP_CHANNELS:       // add support 4,6 channel
2191 #ifdef DEBUG
2192                 printk("SNDCTL_DSP_CHANNELS\n");
2193 #endif
2194                 if (get_user(val, p))
2195                         return -EFAULT;
2196                 if (val > 0) {
2197                         if (dmabuf->enable & DAC_RUNNING) {
2198                                 stop_dac(state);
2199                         }
2200                         if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING) {
2201                                 stop_spdifout(state);
2202                         }
2203                         if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING) {
2204                                 stop_spdifout(state);
2205                         }
2206                         if (dmabuf->enable & ADC_RUNNING) {
2207                                 stop_adc(state);
2208                         }
2209                 } else {
2210                         return put_user(state->card->channels, p);
2211                 }
2212
2213                 i_scr = inl(state->card->iobase + ALI_SCR);
2214                 /* Current # of channels enabled */
2215                 if (i_scr & 0x00000100)
2216                         ret = 4;
2217                 else if (i_scr & 0x00000200)
2218                         ret = 6;
2219                 else
2220                         ret = 2;
2221                 switch (val) {
2222                 case 2: /* 2 channels is always supported */
2223                         if (codec_independent_spdif_locked > 0) {
2224                                 outl(((i_scr & 0xfffffcff) | 0x00100000), (state->card->iobase + ALI_SCR));
2225                         } else
2226                                 outl((i_scr & 0xfffffcff), (state->card->iobase + ALI_SCR));
2227                         /* Do we need to change mixer settings????  */
2228                         break;
2229                 case 4: /* Supported on some chipsets, better check first */
2230                         if (codec_independent_spdif_locked > 0) {
2231                                 outl(((i_scr & 0xfffffcff) | 0x00000100 | 0x00200000), (state->card->iobase + ALI_SCR));
2232                         } else
2233                                 outl(((i_scr & 0xfffffcff) | 0x00000100), (state->card->iobase + ALI_SCR));
2234                         break;
2235                 case 6: /* Supported on some chipsets, better check first */
2236                         if (codec_independent_spdif_locked > 0) {
2237                                 outl(((i_scr & 0xfffffcff) | 0x00000200 | 0x00008000 | 0x00300000), (state->card->iobase + ALI_SCR));
2238                         } else
2239                                 outl(((i_scr & 0xfffffcff) | 0x00000200 | 0x00008000), (state->card->iobase + ALI_SCR));
2240                         break;
2241                 default:        /* nothing else is ever supported by the chipset */
2242                         val = ret;
2243                         break;
2244                 }
2245                 return put_user(val, p);
2246         case SNDCTL_DSP_POST:   /* the user has sent all data and is notifying us */
2247                 /* we update the swptr to the end of the last sg segment then return */
2248 #ifdef DEBUG
2249                 printk("SNDCTL_DSP_POST\n");
2250 #endif
2251                 if (codec_independent_spdif_locked > 0) {
2252                         if (!dmabuf->ready || (dmabuf->enable != CODEC_SPDIFOUT_RUNNING))
2253                                 return 0;
2254                 } else {
2255                         if (controller_independent_spdif_locked > 0) {
2256                                 if (!dmabuf->ready || (dmabuf->enable != CONTROLLER_SPDIFOUT_RUNNING))
2257                                         return 0;
2258                         } else {
2259                                 if (!dmabuf->ready || (dmabuf->enable != DAC_RUNNING))
2260                                         return 0;
2261                         }
2262                 }
2263                 if ((dmabuf->swptr % dmabuf->fragsize) != 0) {
2264                         val = dmabuf->fragsize - (dmabuf->swptr % dmabuf->fragsize);
2265                         dmabuf->swptr += val;
2266                         dmabuf->count += val;
2267                 }
2268                 return 0;
2269         case SNDCTL_DSP_SUBDIVIDE:
2270                 if (dmabuf->subdivision)
2271                         return -EINVAL;
2272                 if (get_user(val, p))
2273                         return -EFAULT;
2274                 if (val != 1 && val != 2 && val != 4)
2275                         return -EINVAL;
2276 #ifdef DEBUG
2277                 printk("SNDCTL_DSP_SUBDIVIDE %d\n", val);
2278 #endif
2279                 dmabuf->subdivision = val;
2280                 dmabuf->ready = 0;
2281                 return 0;
2282         case SNDCTL_DSP_SETFRAGMENT:
2283                 if (get_user(val, p))
2284                         return -EFAULT;
2285                 dmabuf->ossfragsize = 1 << (val & 0xffff);
2286                 dmabuf->ossmaxfrags = (val >> 16) & 0xffff;
2287                 if (!dmabuf->ossfragsize || !dmabuf->ossmaxfrags)
2288                         return -EINVAL;
2289                 /*
2290                  * Bound the frag size into our allowed range of 256 - 4096
2291                  */
2292                 if (dmabuf->ossfragsize < 256)
2293                         dmabuf->ossfragsize = 256;
2294                 else if (dmabuf->ossfragsize > 4096)
2295                         dmabuf->ossfragsize = 4096;
2296                 /*
2297                  * The numfrags could be something reasonable, or it could
2298                  * be 0xffff meaning "Give me as much as possible".  So,
2299                  * we check the numfrags * fragsize doesn't exceed our
2300                  * 64k buffer limit, nor is it less than our 8k minimum.
2301                  * If it fails either one of these checks, then adjust the
2302                  * number of fragments, not the size of them.  It's OK if
2303                  * our number of fragments doesn't equal 32 or anything
2304                  * like our hardware based number now since we are using
2305                  * a different frag count for the hardware.  Before we get
2306                  * into this though, bound the maxfrags to avoid overflow
2307                  * issues.  A reasonable bound would be 64k / 256 since our
2308                  * maximum buffer size is 64k and our minimum frag size is
2309                  * 256.  On the other end, our minimum buffer size is 8k and
2310                  * our maximum frag size is 4k, so the lower bound should
2311                  * be 2.
2312                  */
2313                 if (dmabuf->ossmaxfrags > 256)
2314                         dmabuf->ossmaxfrags = 256;
2315                 else if (dmabuf->ossmaxfrags < 2)
2316                         dmabuf->ossmaxfrags = 2;
2317                 val = dmabuf->ossfragsize * dmabuf->ossmaxfrags;
2318                 while (val < 8192) {
2319                         val <<= 1;
2320                         dmabuf->ossmaxfrags <<= 1;
2321                 }
2322                 while (val > 65536) {
2323                         val >>= 1;
2324                         dmabuf->ossmaxfrags >>= 1;
2325                 }
2326                 dmabuf->ready = 0;
2327 #ifdef DEBUG
2328                 printk("SNDCTL_DSP_SETFRAGMENT 0x%x, %d, %d\n", val,
2329                        dmabuf->ossfragsize, dmabuf->ossmaxfrags);
2330 #endif
2331                 return 0;
2332         case SNDCTL_DSP_GETOSPACE:
2333                 if (!(file->f_mode & FMODE_WRITE))
2334                         return -EINVAL;
2335                 if (codec_independent_spdif_locked > 0) {
2336                         if (!dmabuf->ready && (val = prog_dmabuf(state, 2)) != 0)
2337                                 return val;
2338                 } else {
2339                         if (controller_independent_spdif_locked > 0) {
2340                                 if (!dmabuf->ready && (val = prog_dmabuf(state, 3)) != 0)
2341                                         return val;
2342                         } else {
2343                                 if (!dmabuf->ready && (val = prog_dmabuf(state, 0)) != 0)
2344                                         return val;
2345                         }
2346                 }
2347                 spin_lock_irqsave(&state->card->lock, flags);
2348                 ali_update_ptr(state);
2349                 abinfo.fragsize = dmabuf->userfragsize;
2350                 abinfo.fragstotal = dmabuf->userfrags;
2351                 if (dmabuf->mapped)
2352                         abinfo.bytes = dmabuf->dmasize;
2353                 else
2354                         abinfo.bytes = ali_get_free_write_space(state);
2355                 abinfo.fragments = abinfo.bytes / dmabuf->userfragsize;
2356                 spin_unlock_irqrestore(&state->card->lock, flags);
2357 #if defined(DEBUG) || defined(DEBUG_MMAP)
2358                 printk("SNDCTL_DSP_GETOSPACE %d, %d, %d, %d\n",
2359                        abinfo.bytes, abinfo.fragsize, abinfo.fragments,
2360                        abinfo.fragstotal);
2361 #endif
2362                 return copy_to_user(argp, &abinfo,
2363                                     sizeof(abinfo)) ? -EFAULT : 0;
2364         case SNDCTL_DSP_GETOPTR:
2365                 if (!(file->f_mode & FMODE_WRITE))
2366                         return -EINVAL;
2367                 if (codec_independent_spdif_locked > 0) {
2368                         if (!dmabuf->ready && (val = prog_dmabuf(state, 2)) != 0)
2369                                 return val;
2370                 } else {
2371                         if (controller_independent_spdif_locked > 0) {
2372                                 if (!dmabuf->ready && (val = prog_dmabuf(state, 3)) != 0)
2373                                         return val;
2374                         } else {
2375                                 if (!dmabuf->ready && (val = prog_dmabuf(state, 0)) != 0)
2376                                         return val;
2377                         }
2378                 }
2379                 spin_lock_irqsave(&state->card->lock, flags);
2380                 val = ali_get_free_write_space(state);
2381                 cinfo.bytes = dmabuf->total_bytes;
2382                 cinfo.ptr = dmabuf->hwptr;
2383                 cinfo.blocks = val / dmabuf->userfragsize;
2384                 if (codec_independent_spdif_locked > 0) {
2385                         if (dmabuf->mapped && (dmabuf->trigger & SPDIF_ENABLE_OUTPUT)) {
2386                                 dmabuf->count += val;
2387                                 dmabuf->swptr = (dmabuf->swptr + val) % dmabuf->dmasize;
2388                                 __ali_update_lvi(state, 2);
2389                         }
2390                 } else {
2391                         if (controller_independent_spdif_locked > 0) {
2392                                 if (dmabuf->mapped && (dmabuf->trigger & SPDIF_ENABLE_OUTPUT)) {
2393                                         dmabuf->count += val;
2394                                         dmabuf->swptr = (dmabuf->swptr + val) % dmabuf->dmasize;
2395                                         __ali_update_lvi(state, 3);
2396                                 }
2397                         } else {
2398                                 if (dmabuf->mapped && (dmabuf->trigger & PCM_ENABLE_OUTPUT)) {
2399                                         dmabuf->count += val;
2400                                         dmabuf->swptr = (dmabuf->swptr + val) % dmabuf->dmasize;
2401                                         __ali_update_lvi(state, 0);
2402                                 }
2403                         }
2404                 }
2405                 spin_unlock_irqrestore(&state->card->lock, flags);
2406 #if defined(DEBUG) || defined(DEBUG_MMAP)
2407                 printk("SNDCTL_DSP_GETOPTR %d, %d, %d, %d\n", cinfo.bytes,
2408                        cinfo.blocks, cinfo.ptr, dmabuf->count);
2409 #endif
2410                 return copy_to_user(argp, &cinfo, sizeof(cinfo))? -EFAULT : 0;
2411         case SNDCTL_DSP_GETISPACE:
2412                 if (!(file->f_mode & FMODE_READ))
2413                         return -EINVAL;
2414                 if (!dmabuf->ready && (val = prog_dmabuf(state, 1)) != 0)
2415                         return val;
2416                 spin_lock_irqsave(&state->card->lock, flags);
2417                 abinfo.bytes = ali_get_available_read_data(state);
2418                 abinfo.fragsize = dmabuf->userfragsize;
2419                 abinfo.fragstotal = dmabuf->userfrags;
2420                 abinfo.fragments = abinfo.bytes / dmabuf->userfragsize;
2421                 spin_unlock_irqrestore(&state->card->lock, flags);
2422 #if defined(DEBUG) || defined(DEBUG_MMAP)
2423                 printk("SNDCTL_DSP_GETISPACE %d, %d, %d, %d\n",
2424                        abinfo.bytes, abinfo.fragsize, abinfo.fragments,
2425                        abinfo.fragstotal);
2426 #endif
2427                 return copy_to_user(argp, &abinfo,
2428                                     sizeof(abinfo)) ? -EFAULT : 0;
2429         case SNDCTL_DSP_GETIPTR:
2430                 if (!(file->f_mode & FMODE_READ))
2431                         return -EINVAL;
2432                 if (!dmabuf->ready && (val = prog_dmabuf(state, 0)) != 0)
2433                         return val;
2434                 spin_lock_irqsave(&state->card->lock, flags);
2435                 val = ali_get_available_read_data(state);
2436                 cinfo.bytes = dmabuf->total_bytes;
2437                 cinfo.blocks = val / dmabuf->userfragsize;
2438                 cinfo.ptr = dmabuf->hwptr;
2439                 if (dmabuf->mapped && (dmabuf->trigger & PCM_ENABLE_INPUT)) {
2440                         dmabuf->count -= val;
2441                         dmabuf->swptr = (dmabuf->swptr + val) % dmabuf->dmasize;
2442                         __ali_update_lvi(state, 1);
2443                 }
2444                 spin_unlock_irqrestore(&state->card->lock, flags);
2445 #if defined(DEBUG) || defined(DEBUG_MMAP)
2446                 printk("SNDCTL_DSP_GETIPTR %d, %d, %d, %d\n", cinfo.bytes,
2447                        cinfo.blocks, cinfo.ptr, dmabuf->count);
2448 #endif
2449                 return copy_to_user(argp, &cinfo, sizeof(cinfo))? -EFAULT: 0;
2450         case SNDCTL_DSP_NONBLOCK:
2451 #ifdef DEBUG
2452                 printk("SNDCTL_DSP_NONBLOCK\n");
2453 #endif
2454                 file->f_flags |= O_NONBLOCK;
2455                 return 0;
2456         case SNDCTL_DSP_GETCAPS:
2457 #ifdef DEBUG
2458                 printk("SNDCTL_DSP_GETCAPS\n");
2459 #endif
2460                 return put_user(DSP_CAP_REALTIME | DSP_CAP_TRIGGER |
2461                                 DSP_CAP_MMAP | DSP_CAP_BIND, p);
2462         case SNDCTL_DSP_GETTRIGGER:
2463                 val = 0;
2464 #ifdef DEBUG
2465                 printk("SNDCTL_DSP_GETTRIGGER 0x%x\n", dmabuf->trigger);
2466 #endif
2467                 return put_user(dmabuf->trigger, p);
2468         case SNDCTL_DSP_SETTRIGGER:
2469                 if (get_user(val, p))
2470                         return -EFAULT;
2471 #if defined(DEBUG) || defined(DEBUG_MMAP)
2472                 printk("SNDCTL_DSP_SETTRIGGER 0x%x\n", val);
2473 #endif
2474                 if (!(val & PCM_ENABLE_INPUT) && dmabuf->enable == ADC_RUNNING) {
2475                         stop_adc(state);
2476                 }
2477                 if (!(val & PCM_ENABLE_OUTPUT) && dmabuf->enable == DAC_RUNNING) {
2478                         stop_dac(state);
2479                 }
2480                 if (!(val & SPDIF_ENABLE_OUTPUT) && dmabuf->enable == CODEC_SPDIFOUT_RUNNING) {
2481                         stop_spdifout(state);
2482                 }
2483                 if (!(val & SPDIF_ENABLE_OUTPUT) && dmabuf->enable == CONTROLLER_SPDIFOUT_RUNNING) {
2484                         stop_spdifout(state);
2485                 }
2486                 dmabuf->trigger = val;
2487                 if (val & PCM_ENABLE_OUTPUT && !(dmabuf->enable & DAC_RUNNING)) {
2488                         if (!dmabuf->write_channel) {
2489                                 dmabuf->ready = 0;
2490                                 dmabuf->write_channel = state->card->alloc_pcm_channel(state->card);
2491                                 if (!dmabuf->write_channel)
2492                                         return -EBUSY;
2493                         }
2494                         if (!dmabuf->ready && (ret = prog_dmabuf(state, 0)))
2495                                 return ret;
2496                         if (dmabuf->mapped) {
2497                                 spin_lock_irqsave(&state->card->lock, flags);
2498                                 ali_update_ptr(state);
2499                                 dmabuf->count = 0;
2500                                 dmabuf->swptr = dmabuf->hwptr;
2501                                 dmabuf->count = ali_get_free_write_space(state);
2502                                 dmabuf->swptr = (dmabuf->swptr + dmabuf->count) % dmabuf->dmasize;
2503                                 __ali_update_lvi(state, 0);
2504                                 spin_unlock_irqrestore(&state->card->lock,
2505                                                        flags);
2506                         } else
2507                                 start_dac(state);
2508                 }
2509                 if (val & SPDIF_ENABLE_OUTPUT && !(dmabuf->enable & CODEC_SPDIFOUT_RUNNING)) {
2510                         if (!dmabuf->codec_spdifout_channel) {
2511                                 dmabuf->ready = 0;
2512                                 dmabuf->codec_spdifout_channel = state->card->alloc_codec_spdifout_channel(state->card);
2513                                 if (!dmabuf->codec_spdifout_channel)
2514                                         return -EBUSY;
2515                         }
2516                         if (!dmabuf->ready && (ret = prog_dmabuf(state, 2)))
2517                                 return ret;
2518                         if (dmabuf->mapped) {
2519                                 spin_lock_irqsave(&state->card->lock, flags);
2520                                 ali_update_ptr(state);
2521                                 dmabuf->count = 0;
2522                                 dmabuf->swptr = dmabuf->hwptr;
2523                                 dmabuf->count = ali_get_free_write_space(state);
2524                                 dmabuf->swptr = (dmabuf->swptr + dmabuf->count) % dmabuf->dmasize;
2525                                 __ali_update_lvi(state, 2);
2526                                 spin_unlock_irqrestore(&state->card->lock,
2527                                                        flags);
2528                         } else
2529                                 start_spdifout(state);
2530                 }
2531                 if (val & SPDIF_ENABLE_OUTPUT && !(dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING)) {
2532                         if (!dmabuf->controller_spdifout_channel) {
2533                                 dmabuf->ready = 0;
2534                                 dmabuf->controller_spdifout_channel = state->card->alloc_controller_spdifout_channel(state->card);
2535                                 if (!dmabuf->controller_spdifout_channel)
2536                                         return -EBUSY;
2537                         }
2538                         if (!dmabuf->ready && (ret = prog_dmabuf(state, 3)))
2539                                 return ret;
2540                         if (dmabuf->mapped) {
2541                                 spin_lock_irqsave(&state->card->lock, flags);
2542                                 ali_update_ptr(state);
2543                                 dmabuf->count = 0;
2544                                 dmabuf->swptr = dmabuf->hwptr;
2545                                 dmabuf->count = ali_get_free_write_space(state);
2546                                 dmabuf->swptr = (dmabuf->swptr + dmabuf->count) % dmabuf->dmasize;
2547                                 __ali_update_lvi(state, 3);
2548                                 spin_unlock_irqrestore(&state->card->lock, flags);
2549                         } else
2550                                 start_spdifout(state);
2551                 }
2552                 if (val & PCM_ENABLE_INPUT && !(dmabuf->enable & ADC_RUNNING)) {
2553                         if (!dmabuf->read_channel) {
2554                                 dmabuf->ready = 0;
2555                                 dmabuf->read_channel = state->card->alloc_rec_pcm_channel(state->card);
2556                                 if (!dmabuf->read_channel)
2557                                         return -EBUSY;
2558                         }
2559                         if (!dmabuf->ready && (ret = prog_dmabuf(state, 1)))
2560                                 return ret;
2561                         if (dmabuf->mapped) {
2562                                 spin_lock_irqsave(&state->card->lock,
2563                                                   flags);
2564                                 ali_update_ptr(state);
2565                                 dmabuf->swptr = dmabuf->hwptr;
2566                                 dmabuf->count = 0;
2567                                 spin_unlock_irqrestore(&state->card->lock, flags);
2568                         }
2569                         ali_update_lvi(state, 1);
2570                         start_adc(state);
2571                 }
2572                 return 0;
2573         case SNDCTL_DSP_SETDUPLEX:
2574 #ifdef DEBUG
2575                 printk("SNDCTL_DSP_SETDUPLEX\n");
2576 #endif
2577                 return -EINVAL;
2578         case SNDCTL_DSP_GETODELAY:
2579                 if (!(file->f_mode & FMODE_WRITE))
2580                         return -EINVAL;
2581                 spin_lock_irqsave(&state->card->lock, flags);
2582                 ali_update_ptr(state);
2583                 val = dmabuf->count;
2584                 spin_unlock_irqrestore(&state->card->lock, flags);
2585 #ifdef DEBUG
2586                 printk("SNDCTL_DSP_GETODELAY %d\n", dmabuf->count);
2587 #endif
2588                 return put_user(val, p);
2589         case SOUND_PCM_READ_RATE:
2590 #ifdef DEBUG
2591                 printk("SOUND_PCM_READ_RATE %d\n", dmabuf->rate);
2592 #endif
2593                 return put_user(dmabuf->rate, p);
2594         case SOUND_PCM_READ_CHANNELS:
2595 #ifdef DEBUG
2596                 printk("SOUND_PCM_READ_CHANNELS\n");
2597 #endif
2598                 return put_user(2, p);
2599         case SOUND_PCM_READ_BITS:
2600 #ifdef DEBUG
2601                 printk("SOUND_PCM_READ_BITS\n");
2602 #endif
2603                 return put_user(AFMT_S16_LE, p);
2604         case SNDCTL_DSP_SETSPDIF:       /* Set S/PDIF Control register */
2605 #ifdef DEBUG
2606                 printk("SNDCTL_DSP_SETSPDIF\n");
2607 #endif
2608                 if (get_user(val, p))
2609                         return -EFAULT;
2610                 /* Check to make sure the codec supports S/PDIF transmitter */
2611                 if ((state->card->ac97_features & 4)) {
2612                         /* mask out the transmitter speed bits so the user can't set them */
2613                         val &= ~0x3000;
2614                         /* Add the current transmitter speed bits to the passed value */
2615                         ret = ali_ac97_get(codec, AC97_SPDIF_CONTROL);
2616                         val |= (ret & 0x3000);
2617                         ali_ac97_set(codec, AC97_SPDIF_CONTROL, val);
2618                         if (ali_ac97_get(codec, AC97_SPDIF_CONTROL) != val) {
2619                                 printk(KERN_ERR "ali_audio: Unable to set S/PDIF configuration to 0x%04x.\n", val);
2620                                 return -EFAULT;
2621                         }
2622                 }
2623 #ifdef DEBUG
2624                 else
2625                         printk(KERN_WARNING "ali_audio: S/PDIF transmitter not avalible.\n");
2626 #endif
2627                 return put_user(val, p);
2628         case SNDCTL_DSP_GETSPDIF:       /* Get S/PDIF Control register */
2629 #ifdef DEBUG
2630                 printk("SNDCTL_DSP_GETSPDIF\n");
2631 #endif
2632                 if (get_user(val, p))
2633                         return -EFAULT;
2634                 /* Check to make sure the codec supports S/PDIF transmitter */
2635                 if (!(state->card->ac97_features & 4)) {
2636 #ifdef DEBUG
2637                         printk(KERN_WARNING "ali_audio: S/PDIF transmitter not avalible.\n");
2638 #endif
2639                         val = 0;
2640                 } else {
2641                         val = ali_ac97_get(codec, AC97_SPDIF_CONTROL);
2642                 }
2643
2644                 return put_user(val, p);
2645 //end add support spdif out
2646 //add support 4,6 channel
2647         case SNDCTL_DSP_GETCHANNELMASK:
2648 #ifdef DEBUG
2649                 printk("SNDCTL_DSP_GETCHANNELMASK\n");
2650 #endif
2651                 if (get_user(val, p))
2652                         return -EFAULT;
2653                 /* Based on AC'97 DAC support, not ICH hardware */
2654                 val = DSP_BIND_FRONT;
2655                 if (state->card->ac97_features & 0x0004)
2656                         val |= DSP_BIND_SPDIF;
2657                 if (state->card->ac97_features & 0x0080)
2658                         val |= DSP_BIND_SURR;
2659                 if (state->card->ac97_features & 0x0140)
2660                         val |= DSP_BIND_CENTER_LFE;
2661                 return put_user(val, p);
2662         case SNDCTL_DSP_BIND_CHANNEL:
2663 #ifdef DEBUG
2664                 printk("SNDCTL_DSP_BIND_CHANNEL\n");
2665 #endif
2666                 if (get_user(val, p))
2667                         return -EFAULT;
2668                 if (val == DSP_BIND_QUERY) {
2669                         val = DSP_BIND_FRONT;   /* Always report this as being enabled */
2670                         if (state->card->ac97_status & SPDIF_ON)
2671                                 val |= DSP_BIND_SPDIF;
2672                         else {
2673                                 if (state->card->ac97_status & SURR_ON)
2674                                         val |= DSP_BIND_SURR;
2675                                 if (state->card->
2676                                     ac97_status & CENTER_LFE_ON)
2677                                         val |= DSP_BIND_CENTER_LFE;
2678                         }
2679                 } else {        /* Not a query, set it */
2680                         if (!(file->f_mode & FMODE_WRITE))
2681                                 return -EINVAL;
2682                         if (dmabuf->enable == DAC_RUNNING) {
2683                                 stop_dac(state);
2684                         }
2685                         if (val & DSP_BIND_SPDIF) {     /* Turn on SPDIF */
2686                                 /*  Ok, this should probably define what slots
2687                                  *  to use. For now, we'll only set it to the
2688                                  *  defaults:
2689                                  *
2690                                  *   non multichannel codec maps to slots 3&4
2691                                  *   2 channel codec maps to slots 7&8
2692                                  *   4 channel codec maps to slots 6&9
2693                                  *   6 channel codec maps to slots 10&11
2694                                  *
2695                                  *  there should be some way for the app to
2696                                  *  select the slot assignment.
2697                                  */
2698                                 i_scr = inl(state->card->iobase + ALI_SCR);
2699                                 if (codec_independent_spdif_locked > 0) {
2700
2701                                         if ((i_scr & 0x00300000) == 0x00100000) {
2702                                                 ali_set_spdif_output(state, AC97_EA_SPSA_7_8, codec_independent_spdif_locked);
2703                                         } else {
2704                                                 if ((i_scr & 0x00300000) == 0x00200000) {
2705                                                         ali_set_spdif_output(state, AC97_EA_SPSA_6_9, codec_independent_spdif_locked);
2706                                                 } else {
2707                                                         if ((i_scr & 0x00300000) == 0x00300000) {
2708                                                                 ali_set_spdif_output(state, AC97_EA_SPSA_10_11, codec_independent_spdif_locked);
2709                                                         }
2710                                                 }
2711                                         }
2712                                 } else {        /* codec spdif out (pcm out share ) */
2713                                         ali_set_spdif_output(state, AC97_EA_SPSA_3_4, dmabuf->rate);    //I do not modify
2714                                 }
2715
2716                                 if (!(state->card->ac97_status & SPDIF_ON))
2717                                         val &= ~DSP_BIND_SPDIF;
2718                         } else {
2719                                 int mask;
2720                                 int channels;
2721                                 /* Turn off S/PDIF if it was on */
2722                                 if (state->card->ac97_status & SPDIF_ON)
2723                                         ali_set_spdif_output(state, -1, 0);
2724                                 mask =
2725                                     val & (DSP_BIND_FRONT | DSP_BIND_SURR |
2726                                            DSP_BIND_CENTER_LFE);
2727                                 switch (mask) {
2728                                 case DSP_BIND_FRONT:
2729                                         channels = 2;
2730                                         break;
2731                                 case DSP_BIND_FRONT | DSP_BIND_SURR:
2732                                         channels = 4;
2733                                         break;
2734                                 case DSP_BIND_FRONT | DSP_BIND_SURR | DSP_BIND_CENTER_LFE:
2735                                         channels = 6;
2736                                         break;
2737                                 default:
2738                                         val = DSP_BIND_FRONT;
2739                                         channels = 2;
2740                                         break;
2741                                 }
2742                                 ali_set_dac_channels(state, channels);
2743                                 /* check that they really got turned on */
2744                                 if (!state->card->ac97_status & SURR_ON)
2745                                         val &= ~DSP_BIND_SURR;
2746                                 if (!state->card->
2747                                     ac97_status & CENTER_LFE_ON)
2748                                         val &= ~DSP_BIND_CENTER_LFE;
2749                         }
2750                 }
2751                 return put_user(val, p);
2752         case SNDCTL_DSP_MAPINBUF:
2753         case SNDCTL_DSP_MAPOUTBUF:
2754         case SNDCTL_DSP_SETSYNCRO:
2755         case SOUND_PCM_WRITE_FILTER:
2756         case SOUND_PCM_READ_FILTER:
2757                 return -EINVAL;
2758         }
2759         return -EINVAL;
2760 }
2761
2762 static int ali_open(struct inode *inode, struct file *file)
2763 {
2764         int i = 0;
2765         struct ali_card *card = devs;
2766         struct ali_state *state = NULL;
2767         struct dmabuf *dmabuf = NULL;
2768         unsigned int i_scr;
2769
2770         /* find an available virtual channel (instance of /dev/dsp) */
2771
2772         while (card != NULL) {
2773
2774                 /*
2775                  * If we are initializing and then fail, card could go
2776                  * away unuexpectedly while we are in the for() loop.
2777                  * So, check for card on each iteration before we check
2778                  * for card->initializing to avoid a possible oops.
2779                  * This usually only matters for times when the driver is
2780                  * autoloaded by kmod.
2781                  */
2782                 for (i = 0; i < 50 && card && card->initializing; i++) {
2783                         set_current_state(TASK_UNINTERRUPTIBLE);
2784                         schedule_timeout(HZ / 20);
2785                 }
2786
2787                 for (i = 0; i < NR_HW_CH && card && !card->initializing; i++) {
2788                         if (card->states[i] == NULL) {
2789                                 state = card->states[i] = (struct ali_state *) kmalloc(sizeof(struct ali_state), GFP_KERNEL);
2790                                 if (state == NULL)
2791                                         return -ENOMEM;
2792                                 memset(state, 0, sizeof(struct ali_state));
2793                                 dmabuf = &state->dmabuf;
2794                                 goto found_virt;
2795                         }
2796                 }
2797                 card = card->next;
2798         }
2799
2800         /* no more virtual channel avaiable */
2801         if (!state)
2802                 return -ENODEV;
2803 found_virt:
2804         /* initialize the virtual channel */
2805
2806         state->virt = i;
2807         state->card = card;
2808         state->magic = ALI5455_STATE_MAGIC;
2809         init_waitqueue_head(&dmabuf->wait);
2810         init_MUTEX(&state->open_sem);
2811         file->private_data = state;
2812         dmabuf->trigger = 0;
2813         /* allocate hardware channels */
2814         if (file->f_mode & FMODE_READ) {
2815                 if ((dmabuf->read_channel =
2816                      card->alloc_rec_pcm_channel(card)) == NULL) {
2817                         kfree(card->states[i]);
2818                         card->states[i] = NULL;
2819                         return -EBUSY;
2820                 }
2821                 dmabuf->trigger |= PCM_ENABLE_INPUT;
2822                 ali_set_adc_rate(state, 8000);
2823         }
2824         if (file->f_mode & FMODE_WRITE) {
2825                 if (codec_independent_spdif_locked > 0) {
2826                         if ((dmabuf->codec_spdifout_channel = card->alloc_codec_spdifout_channel(card)) == NULL) {
2827                                 kfree(card->states[i]);
2828                                 card->states[i] = NULL;
2829                                 return -EBUSY;
2830                         }
2831                         dmabuf->trigger |= SPDIF_ENABLE_OUTPUT;
2832                         ali_set_codecspdifout_rate(state, codec_independent_spdif_locked);      //It must add
2833                         i_scr = inl(state->card->iobase + ALI_SCR);
2834                         if ((i_scr & 0x00300000) == 0x00100000) {
2835                                 ali_set_spdif_output(state, AC97_EA_SPSA_7_8, codec_independent_spdif_locked);
2836                         } else {
2837                                 if ((i_scr & 0x00300000) == 0x00200000) {
2838                                         ali_set_spdif_output(state, AC97_EA_SPSA_6_9, codec_independent_spdif_locked);
2839                                 } else {
2840                                         if ((i_scr & 0x00300000) == 0x00300000) {
2841                                                 ali_set_spdif_output(state, AC97_EA_SPSA_10_11, codec_independent_spdif_locked);
2842                                         } else {
2843                                                 ali_set_spdif_output(state, AC97_EA_SPSA_7_8, codec_independent_spdif_locked);
2844                                         }
2845                                 }
2846
2847                         }
2848                 } else {
2849                         if (controller_independent_spdif_locked > 0) {
2850                                 if ((dmabuf->controller_spdifout_channel = card->alloc_controller_spdifout_channel(card)) == NULL) {
2851                                         kfree(card->states[i]);
2852                                         card->states[i] = NULL;
2853                                         return -EBUSY;
2854                                 }
2855                                 dmabuf->trigger |= SPDIF_ENABLE_OUTPUT;
2856                                 ali_set_spdifout_rate(state, controller_independent_spdif_locked);
2857                         } else {
2858                                 if ((dmabuf->write_channel = card->alloc_pcm_channel(card)) == NULL) {
2859                                         kfree(card->states[i]);
2860                                         card->states[i] = NULL;
2861                                         return -EBUSY;
2862                                 }
2863                                 /* Initialize to 8kHz?  What if we don't support 8kHz? */
2864                                 /*  Let's change this to check for S/PDIF stuff */
2865
2866                                 dmabuf->trigger |= PCM_ENABLE_OUTPUT;
2867                                 if (codec_pcmout_share_spdif_locked) {
2868                                         ali_set_dac_rate(state, codec_pcmout_share_spdif_locked);
2869                                         ali_set_spdif_output(state, AC97_EA_SPSA_3_4, codec_pcmout_share_spdif_locked);
2870                                 } else {
2871                                         ali_set_dac_rate(state, 8000);
2872                                 }
2873                         }
2874
2875                 }
2876         }
2877
2878         /* set default sample format. According to OSS Programmer's Guide  /dev/dsp
2879            should be default to unsigned 8-bits, mono, with sample rate 8kHz and
2880            /dev/dspW will accept 16-bits sample, but we don't support those so we
2881            set it immediately to stereo and 16bit, which is all we do support */
2882         dmabuf->fmt |= ALI5455_FMT_16BIT | ALI5455_FMT_STEREO;
2883         dmabuf->ossfragsize = 0;
2884         dmabuf->ossmaxfrags = 0;
2885         dmabuf->subdivision = 0;
2886         state->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE);
2887         outl(0x00000000, card->iobase + ALI_INTERRUPTCR);
2888         outl(0x00000000, card->iobase + ALI_INTERRUPTSR);
2889         return nonseekable_open(inode, file);
2890 }
2891
2892 static int ali_release(struct inode *inode, struct file *file)
2893 {
2894         struct ali_state *state = (struct ali_state *) file->private_data;
2895         struct ali_card *card = state->card;
2896         struct dmabuf *dmabuf = &state->dmabuf;
2897         unsigned long flags;
2898         lock_kernel();
2899
2900         /* stop DMA state machine and free DMA buffers/channels */
2901         if (dmabuf->trigger & PCM_ENABLE_OUTPUT)
2902                 drain_dac(state, 0);
2903
2904         if (dmabuf->trigger & SPDIF_ENABLE_OUTPUT)
2905                 drain_spdifout(state, 0);
2906
2907         if (dmabuf->trigger & PCM_ENABLE_INPUT)
2908                 stop_adc(state);
2909
2910         spin_lock_irqsave(&card->lock, flags);
2911         dealloc_dmabuf(state);
2912         if (file->f_mode & FMODE_WRITE) {
2913                 if (codec_independent_spdif_locked > 0) {
2914                         state->card->free_pcm_channel(state->card, dmabuf->codec_spdifout_channel->num);
2915                 } else {
2916                         if (controller_independent_spdif_locked > 0)
2917                                 state->card->free_pcm_channel(state->card,
2918                                                               dmabuf->controller_spdifout_channel->num);
2919                         else state->card->free_pcm_channel(state->card,
2920                                                               dmabuf->write_channel->num);
2921                 }
2922         }
2923         if (file->f_mode & FMODE_READ)
2924                 state->card->free_pcm_channel(state->card, dmabuf->read_channel->num);
2925
2926         state->card->states[state->virt] = NULL;
2927         kfree(state);
2928         spin_unlock_irqrestore(&card->lock, flags);
2929         unlock_kernel();
2930         return 0;
2931 }
2932
2933 static /*const */ struct file_operations ali_audio_fops = {
2934         .owner          = THIS_MODULE,
2935         .llseek         = no_llseek,
2936         .read           = ali_read,
2937         .write          = ali_write,
2938         .poll           = ali_poll,
2939         .ioctl          = ali_ioctl,
2940         .mmap           = ali_mmap,
2941         .open           = ali_open,
2942         .release        = ali_release,
2943 };
2944
2945 /* Read AC97 codec registers */
2946 static u16 ali_ac97_get(struct ac97_codec *dev, u8 reg)
2947 {
2948         struct ali_card *card = dev->private_data;
2949         int count1 = 100;
2950         char val;
2951         unsigned short int data = 0, count, addr1, addr2 = 0;
2952
2953         spin_lock(&card->ac97_lock);
2954         while (count1-- && (inl(card->iobase + ALI_CAS) & 0x80000000))
2955                 udelay(1);
2956
2957         addr1 = reg;
2958         reg |= 0x0080;
2959         for (count = 0; count < 0x7f; count++) {
2960                 val = inb(card->iobase + ALI_CSPSR);
2961                 if (val & 0x08)
2962                         break;
2963         }
2964         if (count == 0x7f)
2965         {
2966                 spin_unlock(&card->ac97_lock);
2967                 return -1;
2968         }
2969         outw(reg, (card->iobase + ALI_CPR) + 2);
2970         for (count = 0; count < 0x7f; count++) {
2971                 val = inb(card->iobase + ALI_CSPSR);
2972                 if (val & 0x02) {
2973                         data = inw(card->iobase + ALI_SPR);
2974                         addr2 = inw((card->iobase + ALI_SPR) + 2);
2975                         break;
2976                 }
2977         }
2978         spin_unlock(&card->ac97_lock);
2979         if (count == 0x7f)
2980                 return -1;
2981         if (addr2 != addr1)
2982                 return -1;
2983         return ((u16) data);
2984 }
2985
2986 /* write ac97 codec register   */
2987
2988 static void ali_ac97_set(struct ac97_codec *dev, u8 reg, u16 data)
2989 {
2990         struct ali_card *card = dev->private_data;
2991         int count1 = 100;
2992         char val;
2993         unsigned short int count;
2994
2995         spin_lock(&card->ac97_lock);
2996         while (count1-- && (inl(card->iobase + ALI_CAS) & 0x80000000))
2997                 udelay(1);
2998
2999         for (count = 0; count < 0x7f; count++) {
3000                 val = inb(card->iobase + ALI_CSPSR);
3001                 if (val & 0x08)
3002                         break;
3003         }
3004         if (count == 0x7f) {
3005                 printk(KERN_WARNING "ali_ac97_set: AC97 codec register access timed out. \n");
3006                 spin_unlock(&card->ac97_lock);
3007                 return;
3008         }
3009         outw(data, (card->iobase + ALI_CPR));
3010         outb(reg, (card->iobase + ALI_CPR) + 2);
3011         for (count = 0; count < 0x7f; count++) {
3012                 val = inb(card->iobase + ALI_CSPSR);
3013                 if (val & 0x01)
3014                         break;
3015         }
3016         spin_unlock(&card->ac97_lock);
3017         if (count == 0x7f)
3018                 printk(KERN_WARNING "ali_ac97_set: AC97 codec register access timed out. \n");
3019         return;
3020 }
3021
3022 /* OSS /dev/mixer file operation methods */
3023
3024 static int ali_open_mixdev(struct inode *inode, struct file *file)
3025 {
3026         int i;
3027         int minor = iminor(inode);
3028         struct ali_card *card = devs;
3029         for (card = devs; card != NULL; card = card->next) {
3030                 /*
3031                  * If we are initializing and then fail, card could go
3032                  * away unuexpectedly while we are in the for() loop.
3033                  * So, check for card on each iteration before we check
3034                  * for card->initializing to avoid a possible oops.
3035                  * This usually only matters for times when the driver is
3036                  * autoloaded by kmod.
3037                  */
3038                 for (i = 0; i < 50 && card && card->initializing; i++) {
3039                         set_current_state(TASK_UNINTERRUPTIBLE);
3040                         schedule_timeout(HZ / 20);
3041                 }
3042                 for (i = 0; i < NR_AC97 && card && !card->initializing; i++)
3043                         if (card->ac97_codec[i] != NULL
3044                             && card->ac97_codec[i]->dev_mixer == minor) {
3045                                 file->private_data = card->ac97_codec[i];
3046                                 return nonseekable_open(inode, file);
3047                         }
3048         }
3049         return -ENODEV;
3050 }
3051
3052 static int ali_ioctl_mixdev(struct inode *inode,
3053                             struct file *file,
3054                             unsigned int cmd, unsigned long arg)
3055 {
3056         struct ac97_codec *codec = (struct ac97_codec *) file->private_data;
3057         return codec->mixer_ioctl(codec, cmd, arg);
3058 }
3059
3060 static /*const */ struct file_operations ali_mixer_fops = {
3061         .owner  = THIS_MODULE,
3062         .llseek = no_llseek,
3063         .ioctl  = ali_ioctl_mixdev,
3064         .open   = ali_open_mixdev,
3065 };
3066
3067 /* AC97 codec initialisation.  These small functions exist so we don't
3068    duplicate code between module init and apm resume */
3069
3070 static inline int ali_ac97_exists(struct ali_card *card, int ac97_number)
3071 {
3072         unsigned int i = 1;
3073         u32 reg = inl(card->iobase + ALI_RTSR);
3074         if (ac97_number) {
3075                 while (i < 100) {
3076
3077                         reg = inl(card->iobase + ALI_RTSR);
3078                         if (reg & 0x40) {
3079                                 break;
3080                         } else {
3081                                 outl(reg | 0x00000040,
3082                                      card->iobase + 0x34);
3083                                 udelay(1);
3084                         }
3085                         i++;
3086                 }
3087
3088         } else {
3089                 while (i < 100) {
3090                         reg = inl(card->iobase + ALI_RTSR);
3091                         if (reg & 0x80) {
3092                                 break;
3093                         } else {
3094                                 outl(reg | 0x00000080,
3095                                      card->iobase + 0x34);
3096                                 udelay(1);
3097                         }
3098                         i++;
3099                 }
3100         }
3101
3102         if (ac97_number)
3103                 return reg & 0x40;
3104         else
3105                 return reg & 0x80;
3106 }
3107
3108 static inline int ali_ac97_enable_variable_rate(struct ac97_codec *codec)
3109 {
3110         ali_ac97_set(codec, AC97_EXTENDED_STATUS, 9);
3111         ali_ac97_set(codec, AC97_EXTENDED_STATUS, ali_ac97_get(codec, AC97_EXTENDED_STATUS) | 0xE800);
3112         return (ali_ac97_get(codec, AC97_EXTENDED_STATUS) & 1);
3113 }
3114
3115
3116 static int ali_ac97_probe_and_powerup(struct ali_card *card, struct ac97_codec *codec)
3117 {
3118         /* Returns 0 on failure */
3119         int i;
3120         u16 addr;
3121         if (ac97_probe_codec(codec) == 0)
3122                 return 0;
3123         /* ac97_probe_codec is success ,then begin to init codec */
3124         ali_ac97_set(codec, AC97_RESET, 0xffff);
3125         if (card->channel[0].used == 1) {
3126                 ali_ac97_set(codec, AC97_RECORD_SELECT, 0x0000);
3127                 ali_ac97_set(codec, AC97_LINEIN_VOL, 0x0808);
3128                 ali_ac97_set(codec, AC97_RECORD_GAIN, 0x0F0F);
3129         }
3130
3131         if (card->channel[2].used == 1) //if MICin then init codec
3132         {
3133                 ali_ac97_set(codec, AC97_RECORD_SELECT, 0x0000);
3134                 ali_ac97_set(codec, AC97_MIC_VOL, 0x8808);
3135                 ali_ac97_set(codec, AC97_RECORD_GAIN, 0x0F0F);
3136                 ali_ac97_set(codec, AC97_RECORD_GAIN_MIC, 0x0000);
3137         }
3138
3139         ali_ac97_set(codec, AC97_MASTER_VOL_STEREO, 0x0000);
3140         ali_ac97_set(codec, AC97_HEADPHONE_VOL, 0x0000);
3141         ali_ac97_set(codec, AC97_PCMOUT_VOL, 0x0000);
3142         ali_ac97_set(codec, AC97_CD_VOL, 0x0808);
3143         ali_ac97_set(codec, AC97_VIDEO_VOL, 0x0808);
3144         ali_ac97_set(codec, AC97_AUX_VOL, 0x0808);
3145         ali_ac97_set(codec, AC97_PHONE_VOL, 0x8048);
3146         ali_ac97_set(codec, AC97_PCBEEP_VOL, 0x0000);
3147         ali_ac97_set(codec, AC97_GENERAL_PURPOSE, AC97_GP_MIX);
3148         ali_ac97_set(codec, AC97_MASTER_VOL_MONO, 0x0000);
3149         ali_ac97_set(codec, 0x38, 0x0000);
3150         addr = ali_ac97_get(codec, 0x2a);
3151         ali_ac97_set(codec, 0x2a, addr | 0x0001);
3152         addr = ali_ac97_get(codec, 0x2a);
3153         addr = ali_ac97_get(codec, 0x28);
3154         ali_ac97_set(codec, 0x2c, 0xbb80);
3155         addr = ali_ac97_get(codec, 0x2c);
3156         /* power it all up */
3157         ali_ac97_set(codec, AC97_POWER_CONTROL,
3158                      ali_ac97_get(codec, AC97_POWER_CONTROL) & ~0x7f00);
3159         /* wait for analog ready */
3160         for (i = 10; i && ((ali_ac97_get(codec, AC97_POWER_CONTROL) & 0xf) != 0xf); i--) {
3161                 set_current_state(TASK_UNINTERRUPTIBLE);
3162                 schedule_timeout(HZ / 20);
3163         }
3164         /* FIXME !! */
3165         i++;
3166         return i;
3167 }
3168
3169
3170 /* I clone ali5455(2.4.7 )  not clone i810_audio(2.4.18)  */
3171
3172 static int ali_reset_5455(struct ali_card *card)
3173 {
3174         outl(0x80000003, card->iobase + ALI_SCR);
3175         outl(0x83838383, card->iobase + ALI_FIFOCR1);
3176         outl(0x83838383, card->iobase + ALI_FIFOCR2);
3177         if (controller_pcmout_share_spdif_locked > 0) {
3178                 outl((inl(card->iobase + ALI_SPDIFICS) | 0x00000001),
3179                      card->iobase + ALI_SPDIFICS);
3180                 outl(0x0408000a, card->iobase + ALI_INTERFACECR);
3181         } else {
3182                 if (codec_independent_spdif_locked > 0) {
3183                         outl((inl(card->iobase + ALI_SCR) | 0x00100000), card->iobase + ALI_SCR);       // now I select slot 7 & 8
3184                         outl(0x00200000, card->iobase + ALI_INTERFACECR);       //enable codec independent spdifout
3185                 } else
3186                         outl(0x04080002, card->iobase + ALI_INTERFACECR);
3187         }
3188
3189         outl(0x00000000, card->iobase + ALI_INTERRUPTCR);
3190         outl(0x00000000, card->iobase + ALI_INTERRUPTSR);
3191         if (controller_independent_spdif_locked > 0)
3192                 outl((inl(card->iobase + ALI_SPDIFICS) | 0x00000001),
3193                      card->iobase + ALI_SPDIFICS);
3194         return 1;
3195 }
3196
3197
3198 static int ali_ac97_random_init_stuff(struct ali_card
3199                                       *card)
3200 {
3201         u32 reg = inl(card->iobase + ALI_SCR);
3202         int i = 0;
3203         reg = inl(card->iobase + ALI_SCR);
3204         if ((reg & 2) == 0)     /* Cold required */
3205                 reg |= 2;
3206         else
3207                 reg |= 1;       /* Warm */
3208         reg &= ~0x80000000;     /* ACLink on */
3209         outl(reg, card->iobase + ALI_SCR);
3210
3211         while (i < 10) {
3212                 if ((inl(card->iobase + 0x18) & (1 << 1)) == 0)
3213                         break;
3214                 current->state = TASK_UNINTERRUPTIBLE;
3215                 schedule_timeout(HZ / 20);
3216                 i++;
3217         }
3218         if (i == 10) {
3219                 printk(KERN_ERR "ali_audio: AC'97 reset failed.\n");
3220                 return 0;
3221         }
3222
3223         set_current_state(TASK_UNINTERRUPTIBLE);
3224         schedule_timeout(HZ / 2);
3225         return 1;
3226 }
3227
3228 /* AC97 codec initialisation. */
3229
3230 static int __devinit ali_ac97_init(struct ali_card *card)
3231 {
3232         int num_ac97 = 0;
3233         int total_channels = 0;
3234         struct ac97_codec *codec;
3235         u16 eid;
3236
3237         if (!ali_ac97_random_init_stuff(card))
3238                 return 0;
3239
3240         /* Number of channels supported */
3241         /* What about the codec?  Just because the ICH supports */
3242         /* multiple channels doesn't mean the codec does.       */
3243         /* we'll have to modify this in the codec section below */
3244         /* to reflect what the codec has.                       */
3245         /* ICH and ICH0 only support 2 channels so don't bother */
3246         /* to check....                                         */
3247         inl(card->iobase + ALI_CPR);
3248         card->channels = 2;
3249
3250         for (num_ac97 = 0; num_ac97 < NR_AC97; num_ac97++) {
3251
3252                 /* Assume codec isn't available until we go through the
3253                  * gauntlet below */
3254                 card->ac97_codec[num_ac97] = NULL;
3255                 /* The ICH programmer's reference says you should   */
3256                 /* check the ready status before probing. So we chk */
3257                 /*   What do we do if it's not ready?  Wait and try */
3258                 /*   again, or abort?                               */
3259                 if (!ali_ac97_exists(card, num_ac97)) {
3260                         if (num_ac97 == 0)
3261                                 printk(KERN_ERR "ali_audio: Primary codec not ready.\n");
3262                         break;
3263                 }
3264
3265                 if ((codec = ac97_alloc_codec()) == NULL)
3266                         return -ENOMEM;
3267                 /* initialize some basic codec information, other fields will be filled
3268                    in ac97_probe_codec */
3269                 codec->private_data = card;
3270                 codec->id = num_ac97;
3271                 codec->codec_read = ali_ac97_get;
3272                 codec->codec_write = ali_ac97_set;
3273                 if (!ali_ac97_probe_and_powerup(card, codec)) {
3274                         printk(KERN_ERR "ali_audio: timed out waiting for codec %d analog ready",
3275                              num_ac97);
3276                         kfree(codec);
3277                         break;  /* it didn't work */
3278                 }
3279
3280                 /* Store state information about S/PDIF transmitter */
3281                 card->ac97_status = 0;
3282                 /* Don't attempt to get eid until powerup is complete */
3283                 eid = ali_ac97_get(codec, AC97_EXTENDED_ID);
3284                 if (eid == 0xFFFF) {
3285                         printk(KERN_ERR "ali_audio: no codec attached ?\n");
3286                         kfree(codec);
3287                         break;
3288                 }
3289
3290                 card->ac97_features = eid;
3291                 /* Now check the codec for useful features to make up for
3292                    the dumbness of the ali5455 hardware engine */
3293                 if (!(eid & 0x0001))
3294                         printk(KERN_WARNING
3295                                "ali_audio: only 48Khz playback available.\n");
3296                 else {
3297                         if (!ali_ac97_enable_variable_rate(codec)) {
3298                                 printk(KERN_WARNING
3299                                        "ali_audio: Codec refused to allow VRA, using 48Khz only.\n");
3300                                 card->ac97_features &= ~1;
3301                         }
3302                 }
3303
3304                 /* Determine how many channels the codec(s) support   */
3305                 /*   - The primary codec always supports 2            */
3306                 /*   - If the codec supports AMAP, surround DACs will */
3307                 /*     automaticlly get assigned to slots.            */
3308                 /*     * Check for surround DACs and increment if     */
3309                 /*       found.                                       */
3310                 /*   - Else check if the codec is revision 2.2        */
3311                 /*     * If surround DACs exist, assign them to slots */
3312                 /*       and increment channel count.                 */
3313
3314                 /* All of this only applies to ICH2 and above. ICH    */
3315                 /* and ICH0 only support 2 channels.  ICH2 will only  */
3316                 /* support multiple codecs in a "split audio" config. */
3317                 /* as described above.                                */
3318
3319                 /* TODO: Remove all the debugging messages!           */
3320
3321                 if ((eid & 0xc000) == 0)        /* primary codec */
3322                         total_channels += 2;
3323                 if ((codec->dev_mixer = register_sound_mixer(&ali_mixer_fops, -1)) < 0) {
3324                         printk(KERN_ERR "ali_audio: couldn't register mixer!\n");
3325                         kfree(codec);
3326                         break;
3327                 }
3328                 card->ac97_codec[num_ac97] = codec;
3329         }
3330         /* pick the minimum of channels supported by ICHx or codec(s) */
3331         card->channels = (card->channels > total_channels) ? total_channels : card->channels;
3332         return num_ac97;
3333 }
3334
3335 static void __devinit ali_configure_clocking(void)
3336 {
3337         struct ali_card *card;
3338         struct ali_state *state;
3339         struct dmabuf *dmabuf;
3340         unsigned int i, offset, new_offset;
3341         unsigned long flags;
3342         card = devs;
3343
3344         /* We could try to set the clocking for multiple cards, but can you even have
3345          * more than one ali in a machine?  Besides, clocking is global, so unless
3346          * someone actually thinks more than one ali in a machine is possible and
3347          * decides to rewrite that little bit, setting the rate for more than one card
3348          * is a waste of time.
3349          */
3350         if (card != NULL) {
3351                 state = card->states[0] = (struct ali_state *)
3352                     kmalloc(sizeof(struct ali_state), GFP_KERNEL);
3353                 if (state == NULL)
3354                         return;
3355                 memset(state, 0, sizeof(struct ali_state));
3356                 dmabuf = &state->dmabuf;
3357                 dmabuf->write_channel = card->alloc_pcm_channel(card);
3358                 state->virt = 0;
3359                 state->card = card;
3360                 state->magic = ALI5455_STATE_MAGIC;
3361                 init_waitqueue_head(&dmabuf->wait);
3362                 init_MUTEX(&state->open_sem);
3363                 dmabuf->fmt = ALI5455_FMT_STEREO | ALI5455_FMT_16BIT;
3364                 dmabuf->trigger = PCM_ENABLE_OUTPUT;
3365                 ali_set_dac_rate(state, 48000);
3366                 if (prog_dmabuf(state, 0) != 0)
3367                         goto config_out_nodmabuf;
3368
3369                 if (dmabuf->dmasize < 16384)
3370                         goto config_out;
3371
3372                 dmabuf->count = dmabuf->dmasize;
3373                 outb(31, card->iobase + dmabuf->write_channel->port + OFF_LVI);
3374
3375                 local_irq_save(flags);
3376                 start_dac(state);
3377                 offset = ali_get_dma_addr(state, 0);
3378                 mdelay(50);
3379                 new_offset = ali_get_dma_addr(state, 0);
3380                 stop_dac(state);
3381
3382                 outb(2, card->iobase + dmabuf->write_channel->port + OFF_CR);
3383                 local_irq_restore(flags);
3384
3385                 i = new_offset - offset;
3386
3387                 if (i == 0)
3388                         goto config_out;
3389                 i = i / 4 * 20;
3390                 if (i > 48500 || i < 47500) {
3391                         clocking = clocking * clocking / i;
3392                 }
3393 config_out:
3394                 dealloc_dmabuf(state);
3395 config_out_nodmabuf:
3396                 state->card->free_pcm_channel(state->card, state->dmabuf. write_channel->num);
3397                 kfree(state);
3398                 card->states[0] = NULL;
3399         }
3400 }
3401
3402 /* install the driver, we do not allocate hardware channel nor DMA buffer now, they are defered
3403    until "ACCESS" time (in prog_dmabuf called by open/read/write/ioctl/mmap) */
3404
3405 static int __devinit ali_probe(struct pci_dev *pci_dev,
3406                                const struct pci_device_id *pci_id)
3407 {
3408         struct ali_card *card;
3409         if (pci_enable_device(pci_dev))
3410                 return -EIO;
3411         if (pci_set_dma_mask(pci_dev, ALI5455_DMA_MASK)) {
3412                 printk(KERN_ERR "ali5455: architecture does not support"
3413                        " 32bit PCI busmaster DMA\n");
3414                 return -ENODEV;
3415         }
3416
3417         if ((card = kmalloc(sizeof(struct ali_card), GFP_KERNEL)) == NULL) {
3418                 printk(KERN_ERR "ali_audio: out of memory\n");
3419                 return -ENOMEM;
3420         }
3421         memset(card, 0, sizeof(*card));
3422         card->initializing = 1;
3423         card->iobase = pci_resource_start(pci_dev, 0);
3424         card->pci_dev = pci_dev;
3425         card->pci_id = pci_id->device;
3426         card->irq = pci_dev->irq;
3427         card->next = devs;
3428         card->magic = ALI5455_CARD_MAGIC;
3429 #ifdef CONFIG_PM
3430         card->pm_suspended = 0;
3431 #endif
3432         spin_lock_init(&card->lock);
3433         spin_lock_init(&card->ac97_lock);
3434         devs = card;
3435         pci_set_master(pci_dev);
3436         printk(KERN_INFO "ali: %s found at IO 0x%04lx, IRQ %d\n",
3437                card_names[pci_id->driver_data], card->iobase, card->irq);
3438         card->alloc_pcm_channel = ali_alloc_pcm_channel;
3439         card->alloc_rec_pcm_channel = ali_alloc_rec_pcm_channel;
3440         card->alloc_rec_mic_channel = ali_alloc_rec_mic_channel;
3441         card->alloc_codec_spdifout_channel = ali_alloc_codec_spdifout_channel;
3442         card->alloc_controller_spdifout_channel = ali_alloc_controller_spdifout_channel;
3443         card->free_pcm_channel = ali_free_pcm_channel;
3444         card->channel[0].offset = 0;
3445         card->channel[0].port = 0x40;
3446         card->channel[0].num = 0;
3447         card->channel[1].offset = 0;
3448         card->channel[1].port = 0x50;
3449         card->channel[1].num = 1;
3450         card->channel[2].offset = 0;
3451         card->channel[2].port = 0x60;
3452         card->channel[2].num = 2;
3453         card->channel[3].offset = 0;
3454         card->channel[3].port = 0x70;
3455         card->channel[3].num = 3;
3456         card->channel[4].offset = 0;
3457         card->channel[4].port = 0xb0;
3458         card->channel[4].num = 4;
3459         /* claim our iospace and irq */
3460         request_region(card->iobase, 256, card_names[pci_id->driver_data]);
3461         if (request_irq(card->irq, &ali_interrupt, SA_SHIRQ,
3462                         card_names[pci_id->driver_data], card)) {
3463                 printk(KERN_ERR "ali_audio: unable to allocate irq %d\n",
3464                        card->irq);
3465                 release_region(card->iobase, 256);
3466                 kfree(card);
3467                 return -ENODEV;
3468         }
3469
3470         if (ali_reset_5455(card) <= 0) {
3471                 unregister_sound_dsp(card->dev_audio);
3472                 release_region(card->iobase, 256);
3473                 free_irq(card->irq, card);
3474                 kfree(card);
3475                 return -ENODEV;
3476         }
3477
3478         /* initialize AC97 codec and register /dev/mixer */
3479         if (ali_ac97_init(card) < 0) {
3480                 release_region(card->iobase, 256);
3481                 free_irq(card->irq, card);
3482                 kfree(card);
3483                 return -ENODEV;
3484         }
3485
3486         pci_set_drvdata(pci_dev, card);
3487
3488         if (clocking == 0) {
3489                 clocking = 48000;
3490                 ali_configure_clocking();
3491         }
3492
3493         /* register /dev/dsp */
3494         if ((card->dev_audio = register_sound_dsp(&ali_audio_fops, -1)) < 0) {
3495                 int i;
3496                 printk(KERN_ERR"ali_audio: couldn't register DSP device!\n");
3497                 release_region(card->iobase, 256);
3498                 free_irq(card->irq, card);
3499                 for (i = 0; i < NR_AC97; i++)
3500                         if (card->ac97_codec[i] != NULL) {
3501                                 unregister_sound_mixer(card->ac97_codec[i]->dev_mixer);
3502                                 kfree(card->ac97_codec[i]);
3503                         }
3504                 kfree(card);
3505                 return -ENODEV;
3506         }
3507         card->initializing = 0;
3508         return 0;
3509 }
3510
3511 static void __devexit ali_remove(struct pci_dev *pci_dev)
3512 {
3513         int i;
3514         struct ali_card *card = pci_get_drvdata(pci_dev);
3515         /* free hardware resources */
3516         free_irq(card->irq, devs);
3517         release_region(card->iobase, 256);
3518         /* unregister audio devices */
3519         for (i = 0; i < NR_AC97; i++)
3520                 if (card->ac97_codec[i] != NULL) {
3521                         unregister_sound_mixer(card->ac97_codec[i]->
3522                                                dev_mixer);
3523                         ac97_release_codec(card->ac97_codec[i]);
3524                         card->ac97_codec[i] = NULL;
3525                 }
3526         unregister_sound_dsp(card->dev_audio);
3527         kfree(card);
3528 }
3529
3530 #ifdef CONFIG_PM
3531 static int ali_pm_suspend(struct pci_dev *dev, pm_message_t pm_state)
3532 {
3533         struct ali_card *card = pci_get_drvdata(dev);
3534         struct ali_state *state;
3535         unsigned long flags;
3536         struct dmabuf *dmabuf;
3537         int i, num_ac97;
3538
3539         if (!card)
3540                 return 0;
3541         spin_lock_irqsave(&card->lock, flags);
3542         card->pm_suspended = 1;
3543         for (i = 0; i < NR_HW_CH; i++) {
3544                 state = card->states[i];
3545                 if (!state)
3546                         continue;
3547                 /* this happens only if there are open files */
3548                 dmabuf = &state->dmabuf;
3549                 if (dmabuf->enable & DAC_RUNNING ||
3550                     (dmabuf->count
3551                      && (dmabuf->trigger & PCM_ENABLE_OUTPUT))) {
3552                         state->pm_saved_dac_rate = dmabuf->rate;
3553                         stop_dac(state);
3554                 } else {
3555                         state->pm_saved_dac_rate = 0;
3556                 }
3557                 if (dmabuf->enable & ADC_RUNNING) {
3558                         state->pm_saved_adc_rate = dmabuf->rate;
3559                         stop_adc(state);
3560                 } else {
3561                         state->pm_saved_adc_rate = 0;
3562                 }
3563                 dmabuf->ready = 0;
3564                 dmabuf->swptr = dmabuf->hwptr = 0;
3565                 dmabuf->count = dmabuf->total_bytes = 0;
3566         }
3567
3568         spin_unlock_irqrestore(&card->lock, flags);
3569         /* save mixer settings */
3570         for (num_ac97 = 0; num_ac97 < NR_AC97; num_ac97++) {
3571                 struct ac97_codec *codec = card->ac97_codec[num_ac97];
3572                 if (!codec)
3573                         continue;
3574                 for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) {
3575                         if ((supported_mixer(codec, i)) && (codec->read_mixer)) {
3576                                 card->pm_saved_mixer_settings[i][num_ac97] = codec->read_mixer(codec, i);
3577                         }
3578                 }
3579         }
3580         pci_save_state(dev);    /* XXX do we need this? */
3581         pci_disable_device(dev);        /* disable busmastering */
3582         pci_set_power_state(dev, 3);    /* Zzz. */
3583         return 0;
3584 }
3585
3586
3587 static int ali_pm_resume(struct pci_dev *dev)
3588 {
3589         int num_ac97, i = 0;
3590         struct ali_card *card = pci_get_drvdata(dev);
3591         pci_enable_device(dev);
3592         pci_restore_state(dev);
3593         /* observation of a toshiba portege 3440ct suggests that the
3594            hardware has to be more or less completely reinitialized from
3595            scratch after an apm suspend.  Works For Me.   -dan */
3596         ali_ac97_random_init_stuff(card);
3597         for (num_ac97 = 0; num_ac97 < NR_AC97; num_ac97++) {
3598                 struct ac97_codec *codec = card->ac97_codec[num_ac97];
3599                 /* check they haven't stolen the hardware while we were
3600                    away */
3601                 if (!codec || !ali_ac97_exists(card, num_ac97)) {
3602                         if (num_ac97)
3603                                 continue;
3604                         else
3605                                 BUG();
3606                 }
3607                 if (!ali_ac97_probe_and_powerup(card, codec))
3608                         BUG();
3609                 if ((card->ac97_features & 0x0001)) {
3610                         /* at probe time we found we could do variable
3611                            rates, but APM suspend has made it forget
3612                            its magical powers */
3613                         if (!ali_ac97_enable_variable_rate(codec))
3614                                 BUG();
3615                 }
3616                 /* we lost our mixer settings, so restore them */
3617                 for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) {
3618                         if (supported_mixer(codec, i)) {
3619                                 int val = card->pm_saved_mixer_settings[i][num_ac97];
3620                                 codec->mixer_state[i] = val;
3621                                 codec->write_mixer(codec, i,
3622                                                    (val & 0xff),
3623                                                    ((val >> 8) & 0xff));
3624                         }
3625                 }
3626         }
3627
3628         /* we need to restore the sample rate from whatever it was */
3629         for (i = 0; i < NR_HW_CH; i++) {
3630                 struct ali_state *state = card->states[i];
3631                 if (state) {
3632                         if (state->pm_saved_adc_rate)
3633                                 ali_set_adc_rate(state, state->pm_saved_adc_rate);
3634                         if (state->pm_saved_dac_rate)
3635                                 ali_set_dac_rate(state, state->pm_saved_dac_rate);
3636                 }
3637         }
3638
3639         card->pm_suspended = 0;
3640         /* any processes that were reading/writing during the suspend
3641            probably ended up here */
3642         for (i = 0; i < NR_HW_CH; i++) {
3643                 struct ali_state *state = card->states[i];
3644                 if (state)
3645                         wake_up(&state->dmabuf.wait);
3646         }
3647         return 0;
3648 }
3649 #endif                          /* CONFIG_PM */
3650
3651 MODULE_AUTHOR("");
3652 MODULE_DESCRIPTION("ALI 5455 audio support");
3653 MODULE_LICENSE("GPL");
3654 module_param(clocking, int, 0);
3655 /* FIXME: bool? */
3656 module_param(strict_clocking, uint, 0);
3657 module_param(codec_pcmout_share_spdif_locked, uint, 0);
3658 module_param(codec_independent_spdif_locked, uint, 0);
3659 module_param(controller_pcmout_share_spdif_locked, uint, 0);
3660 module_param(controller_independent_spdif_locked, uint, 0);
3661 #define ALI5455_MODULE_NAME "ali5455"
3662 static struct pci_driver ali_pci_driver = {
3663         .name           = ALI5455_MODULE_NAME,
3664         .id_table       = ali_pci_tbl,
3665         .probe          = ali_probe,
3666         .remove         = __devexit_p(ali_remove),
3667 #ifdef CONFIG_PM
3668         .suspend        = ali_pm_suspend,
3669         .resume         = ali_pm_resume,
3670 #endif                          /* CONFIG_PM */
3671 };
3672
3673 static int __init ali_init_module(void)
3674 {
3675         printk(KERN_INFO "ALI 5455 + AC97 Audio, version "
3676                DRIVER_VERSION ", " __TIME__ " " __DATE__ "\n");
3677
3678         if (codec_independent_spdif_locked > 0) {
3679                 if (codec_independent_spdif_locked == 32000
3680                     || codec_independent_spdif_locked == 44100
3681                     || codec_independent_spdif_locked == 48000) {
3682                         printk(KERN_INFO "ali_audio: Enabling S/PDIF at sample rate %dHz.\n", codec_independent_spdif_locked);
3683                 } else {
3684                         printk(KERN_INFO "ali_audio: S/PDIF can only be locked to 32000, 44100, or 48000Hz.\n");
3685                         codec_independent_spdif_locked = 0;
3686                 }
3687         }
3688         if (controller_independent_spdif_locked > 0) {
3689                 if (controller_independent_spdif_locked == 32000
3690                     || controller_independent_spdif_locked == 44100
3691                     || controller_independent_spdif_locked == 48000) {
3692                         printk(KERN_INFO "ali_audio: Enabling S/PDIF at sample rate %dHz.\n", controller_independent_spdif_locked);
3693                 } else {
3694                         printk(KERN_INFO "ali_audio: S/PDIF can only be locked to 32000, 44100, or 48000Hz.\n");
3695                         controller_independent_spdif_locked = 0;
3696                 }
3697         }
3698
3699         if (codec_pcmout_share_spdif_locked > 0) {
3700                 if (codec_pcmout_share_spdif_locked == 32000
3701                     || codec_pcmout_share_spdif_locked == 44100
3702                     || codec_pcmout_share_spdif_locked == 48000) {
3703                         printk(KERN_INFO "ali_audio: Enabling S/PDIF at sample rate %dHz.\n", codec_pcmout_share_spdif_locked);
3704                 } else {
3705                         printk(KERN_INFO "ali_audio: S/PDIF can only be locked to 32000, 44100, or 48000Hz.\n");
3706                         codec_pcmout_share_spdif_locked = 0;
3707                 }
3708         }
3709         if (controller_pcmout_share_spdif_locked > 0) {
3710                 if (controller_pcmout_share_spdif_locked == 32000
3711                     || controller_pcmout_share_spdif_locked == 44100
3712                     || controller_pcmout_share_spdif_locked == 48000) {
3713                         printk(KERN_INFO "ali_audio: Enabling controller S/PDIF at sample rate %dHz.\n", controller_pcmout_share_spdif_locked);
3714                 } else {
3715                         printk(KERN_INFO "ali_audio: S/PDIF can only be locked to 32000, 44100, or 48000Hz.\n");
3716                         controller_pcmout_share_spdif_locked = 0;
3717                 }
3718         }
3719         return pci_register_driver(&ali_pci_driver);
3720 }
3721
3722 static void __exit ali_cleanup_module(void)
3723 {
3724         pci_unregister_driver(&ali_pci_driver);
3725 }
3726
3727 module_init(ali_init_module);
3728 module_exit(ali_cleanup_module);
3729 /*
3730 Local Variables:
3731 c-basic-offset: 8
3732 End:
3733 */