2 * IDE ATAPI floppy driver.
4 * Copyright (C) 1996-1999 Gadi Oxman <gadio@netvision.net.il>
5 * Copyright (C) 2000-2002 Paul Bristow <paul@paulbristow.net>
6 * Copyright (C) 2005 Bartlomiej Zolnierkiewicz
8 * This driver supports the following IDE floppy drives:
10 * LS-120/240 SuperDisk
12 * Iomega PC Card Clik!/PocketZip
14 * For a historical changelog see
15 * Documentation/ide/ChangeLog.ide-floppy.1996-2002
18 #define IDEFLOPPY_VERSION "1.00"
20 #include <linux/module.h>
21 #include <linux/types.h>
22 #include <linux/string.h>
23 #include <linux/kernel.h>
24 #include <linux/delay.h>
25 #include <linux/timer.h>
27 #include <linux/interrupt.h>
28 #include <linux/major.h>
29 #include <linux/errno.h>
30 #include <linux/genhd.h>
31 #include <linux/slab.h>
32 #include <linux/cdrom.h>
33 #include <linux/ide.h>
34 #include <linux/bitops.h>
35 #include <linux/mutex.h>
37 #include <scsi/scsi_ioctl.h>
39 #include <asm/byteorder.h>
40 #include <linux/irq.h>
41 #include <linux/uaccess.h>
43 #include <asm/unaligned.h>
45 /* define to see debug info */
46 #define IDEFLOPPY_DEBUG_LOG 0
48 /* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */
49 #define IDEFLOPPY_DEBUG(fmt, args...)
51 #if IDEFLOPPY_DEBUG_LOG
52 #define debug_log(fmt, args...) \
53 printk(KERN_INFO "ide-floppy: " fmt, ## args)
55 #define debug_log(fmt, args...) do {} while (0)
59 /* Some drives require a longer irq timeout. */
60 #define IDEFLOPPY_WAIT_CMD (5 * WAIT_CMD)
63 * After each failed packet command we issue a request sense command and retry
64 * the packet command IDEFLOPPY_MAX_PC_RETRIES times.
66 #define IDEFLOPPY_MAX_PC_RETRIES 3
69 * With each packet command, we allocate a buffer of IDEFLOPPY_PC_BUFFER_SIZE
72 #define IDEFLOPPY_PC_BUFFER_SIZE 256
75 * In various places in the driver, we need to allocate storage for packet
76 * commands and requests, which will remain valid while we leave the driver to
77 * wait for an interrupt or a timeout event.
79 #define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES)
81 /* format capacities descriptor codes */
82 #define CAPACITY_INVALID 0x00
83 #define CAPACITY_UNFORMATTED 0x01
84 #define CAPACITY_CURRENT 0x02
85 #define CAPACITY_NO_CARTRIDGE 0x03
88 * Most of our global data which we need to save even as we leave the driver
89 * due to an interrupt or a timer event is stored in a variable of type
90 * idefloppy_floppy_t, defined below.
92 typedef struct ide_floppy_obj {
97 unsigned int openers; /* protected by BKL for now */
99 /* Current packet command */
100 struct ide_atapi_pc *pc;
101 /* Last failed packet command */
102 struct ide_atapi_pc *failed_pc;
103 /* Packet command stack */
104 struct ide_atapi_pc pc_stack[IDEFLOPPY_PC_STACK];
105 /* Next free packet command storage space */
107 struct request rq_stack[IDEFLOPPY_PC_STACK];
108 /* We implement a circular array */
111 /* Last error information */
112 u8 sense_key, asc, ascq;
113 /* delay this long before sending packet command */
115 int progress_indication;
117 /* Device information */
119 int blocks, block_size, bs_factor;
120 /* Last format capacity descriptor */
122 /* Copy of the flexible disk page */
123 u8 flexible_disk_page[32];
126 /* Supports format progress report */
128 /* Status/Action flags */
130 } idefloppy_floppy_t;
132 #define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */
134 /* Floppy flag bits values. */
136 /* DRQ interrupt device */
137 IDEFLOPPY_FLAG_DRQ_INTERRUPT = (1 << 0),
138 /* Media may have changed */
139 IDEFLOPPY_FLAG_MEDIA_CHANGED = (1 << 1),
140 /* Format in progress */
141 IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS = (1 << 2),
142 /* Avoid commands not supported in Clik drive */
143 IDEFLOPPY_FLAG_CLIK_DRIVE = (1 << 3),
144 /* Requires BH algorithm for packets */
145 IDEFLOPPY_FLAG_ZIP_DRIVE = (1 << 4),
148 /* Defines for the MODE SENSE command */
149 #define MODE_SENSE_CURRENT 0x00
150 #define MODE_SENSE_CHANGEABLE 0x01
151 #define MODE_SENSE_DEFAULT 0x02
152 #define MODE_SENSE_SAVED 0x03
154 /* IOCTLs used in low-level formatting. */
155 #define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600
156 #define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601
157 #define IDEFLOPPY_IOCTL_FORMAT_START 0x4602
158 #define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603
160 /* Error code returned in rq->errors to the higher part of the driver. */
161 #define IDEFLOPPY_ERROR_GENERAL 101
164 * Pages of the SELECT SENSE / MODE SENSE packet commands.
165 * See SFF-8070i spec.
167 #define IDEFLOPPY_CAPABILITIES_PAGE 0x1b
168 #define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05
170 static DEFINE_MUTEX(idefloppy_ref_mutex);
172 #define to_ide_floppy(obj) container_of(obj, struct ide_floppy_obj, kref)
174 #define ide_floppy_g(disk) \
175 container_of((disk)->private_data, struct ide_floppy_obj, driver)
177 static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk)
179 struct ide_floppy_obj *floppy = NULL;
181 mutex_lock(&idefloppy_ref_mutex);
182 floppy = ide_floppy_g(disk);
184 kref_get(&floppy->kref);
185 mutex_unlock(&idefloppy_ref_mutex);
189 static void idefloppy_cleanup_obj(struct kref *);
191 static void ide_floppy_put(struct ide_floppy_obj *floppy)
193 mutex_lock(&idefloppy_ref_mutex);
194 kref_put(&floppy->kref, idefloppy_cleanup_obj);
195 mutex_unlock(&idefloppy_ref_mutex);
199 * Used to finish servicing a request. For read/write requests, we will call
200 * ide_end_request to pass to the next buffer.
202 static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs)
204 idefloppy_floppy_t *floppy = drive->driver_data;
205 struct request *rq = HWGROUP(drive)->rq;
208 debug_log("Reached %s\n", __func__);
211 case 0: error = IDEFLOPPY_ERROR_GENERAL; break;
212 case 1: error = 0; break;
213 default: error = uptodate;
216 floppy->failed_pc = NULL;
217 /* Why does this happen? */
220 if (!blk_special_request(rq)) {
221 /* our real local end request function */
222 ide_end_request(drive, uptodate, nsecs);
226 /* fixme: need to move this local also */
227 ide_end_drive_cmd(drive, 0, 0);
231 static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
232 unsigned int bcount, int direction)
234 ide_hwif_t *hwif = drive->hwif;
235 struct request *rq = pc->rq;
236 struct req_iterator iter;
237 struct bio_vec *bvec;
242 rq_for_each_segment(bvec, rq, iter) {
246 count = min(bvec->bv_len, bcount);
248 data = bvec_kmap_irq(bvec, &flags);
250 hwif->output_data(drive, NULL, data, count);
252 hwif->input_data(drive, NULL, data, count);
253 bvec_kunmap_irq(data, &flags);
256 pc->b_count += count;
260 idefloppy_end_request(drive, 1, done >> 9);
263 printk(KERN_ERR "%s: leftover data in %s, bcount == %d\n",
264 drive->name, __func__, bcount);
265 ide_pad_transfer(drive, direction, bcount);
269 static void idefloppy_update_buffers(ide_drive_t *drive,
270 struct ide_atapi_pc *pc)
272 struct request *rq = pc->rq;
273 struct bio *bio = rq->bio;
275 while ((bio = rq->bio) != NULL)
276 idefloppy_end_request(drive, 1, 0);
280 * Generate a new packet command request in front of the request queue, before
281 * the current request so that it will be processed immediately, on the next
282 * pass through the driver.
284 static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
287 struct ide_floppy_obj *floppy = drive->driver_data;
289 blk_rq_init(NULL, rq);
290 rq->buffer = (char *) pc;
291 rq->cmd_type = REQ_TYPE_SPECIAL;
292 rq->cmd_flags |= REQ_PREEMPT;
293 rq->rq_disk = floppy->disk;
294 ide_do_drive_cmd(drive, rq);
297 static struct ide_atapi_pc *idefloppy_next_pc_storage(ide_drive_t *drive)
299 idefloppy_floppy_t *floppy = drive->driver_data;
301 if (floppy->pc_stack_index == IDEFLOPPY_PC_STACK)
302 floppy->pc_stack_index = 0;
303 return (&floppy->pc_stack[floppy->pc_stack_index++]);
306 static struct request *idefloppy_next_rq_storage(ide_drive_t *drive)
308 idefloppy_floppy_t *floppy = drive->driver_data;
310 if (floppy->rq_stack_index == IDEFLOPPY_PC_STACK)
311 floppy->rq_stack_index = 0;
312 return (&floppy->rq_stack[floppy->rq_stack_index++]);
315 static void idefloppy_request_sense_callback(ide_drive_t *drive)
317 idefloppy_floppy_t *floppy = drive->driver_data;
318 u8 *buf = floppy->pc->buf;
320 debug_log("Reached %s\n", __func__);
322 if (!floppy->pc->error) {
323 floppy->sense_key = buf[2] & 0x0F;
324 floppy->asc = buf[12];
325 floppy->ascq = buf[13];
326 floppy->progress_indication = buf[15] & 0x80 ?
327 (u16)get_unaligned((u16 *)&buf[16]) : 0x10000;
329 if (floppy->failed_pc)
330 debug_log("pc = %x, sense key = %x, asc = %x,"
332 floppy->failed_pc->c[0],
337 debug_log("sense key = %x, asc = %x, ascq = %x\n",
343 idefloppy_end_request(drive, 1, 0);
345 printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting"
347 idefloppy_end_request(drive, 0, 0);
351 /* General packet command callback function. */
352 static void idefloppy_pc_callback(ide_drive_t *drive)
354 idefloppy_floppy_t *floppy = drive->driver_data;
356 debug_log("Reached %s\n", __func__);
358 idefloppy_end_request(drive, floppy->pc->error ? 0 : 1, 0);
361 static void idefloppy_init_pc(struct ide_atapi_pc *pc)
363 memset(pc->c, 0, 12);
367 pc->buf = pc->pc_buf;
368 pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE;
369 pc->idefloppy_callback = &idefloppy_pc_callback;
372 static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
374 idefloppy_init_pc(pc);
375 pc->c[0] = GPCMD_REQUEST_SENSE;
378 pc->idefloppy_callback = &idefloppy_request_sense_callback;
382 * Called when an error was detected during the last packet command. We queue a
383 * request sense packet command in the head of the request list.
385 static void idefloppy_retry_pc(ide_drive_t *drive)
387 struct ide_atapi_pc *pc;
390 (void)ide_read_error(drive);
391 pc = idefloppy_next_pc_storage(drive);
392 rq = idefloppy_next_rq_storage(drive);
393 idefloppy_create_request_sense_cmd(pc);
394 idefloppy_queue_pc_head(drive, pc, rq);
397 /* The usual interrupt handler called during a packet command. */
398 static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
400 idefloppy_floppy_t *floppy = drive->driver_data;
401 ide_hwif_t *hwif = drive->hwif;
402 struct ide_atapi_pc *pc = floppy->pc;
403 struct request *rq = pc->rq;
404 xfer_func_t *xferfunc;
410 debug_log("Reached %s interrupt handler\n", __func__);
412 if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
413 dma_error = hwif->dma_ops->dma_end(drive);
415 printk(KERN_ERR "%s: DMA %s error\n", drive->name,
416 rq_data_dir(rq) ? "write" : "read");
417 pc->flags |= PC_FLAG_DMA_ERROR;
419 pc->xferred = pc->req_xfer;
420 idefloppy_update_buffers(drive, pc);
422 debug_log("DMA finished\n");
425 /* Clear the interrupt */
426 stat = ide_read_status(drive);
428 /* No more interrupts */
429 if ((stat & DRQ_STAT) == 0) {
430 debug_log("Packet command completed, %d bytes transferred\n",
432 pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
434 local_irq_enable_in_hardirq();
436 if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
438 debug_log("%s: I/O error\n", drive->name);
440 if (pc->c[0] == GPCMD_REQUEST_SENSE) {
441 printk(KERN_ERR "ide-floppy: I/O error in "
442 "request sense command\n");
443 return ide_do_reset(drive);
445 /* Retry operation */
446 idefloppy_retry_pc(drive);
447 /* queued, but not started */
451 if (floppy->failed_pc == pc)
452 floppy->failed_pc = NULL;
453 /* Command finished - Call the callback function */
454 pc->idefloppy_callback(drive);
458 if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
459 pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
460 printk(KERN_ERR "ide-floppy: The floppy wants to issue "
461 "more interrupts in DMA mode\n");
463 return ide_do_reset(drive);
466 /* Get the number of bytes to transfer */
467 bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) |
468 hwif->INB(hwif->io_ports.lbam_addr);
469 /* on this interrupt */
470 ireason = hwif->INB(hwif->io_ports.nsect_addr);
473 printk(KERN_ERR "ide-floppy: CoD != 0 in %s\n", __func__);
474 return ide_do_reset(drive);
476 if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
477 /* Hopefully, we will never get here */
478 printk(KERN_ERR "ide-floppy: We wanted to %s, ",
479 (ireason & IO) ? "Write" : "Read");
480 printk(KERN_ERR "but the floppy wants us to %s !\n",
481 (ireason & IO) ? "Read" : "Write");
482 return ide_do_reset(drive);
484 if (!(pc->flags & PC_FLAG_WRITING)) {
485 /* Reading - Check that we have enough space */
486 temp = pc->xferred + bcount;
487 if (temp > pc->req_xfer) {
488 if (temp > pc->buf_size) {
489 printk(KERN_ERR "ide-floppy: The floppy wants "
490 "to send us more data than expected "
491 "- discarding data\n");
492 ide_pad_transfer(drive, 0, bcount);
494 ide_set_handler(drive,
500 debug_log("The floppy wants to send us more data than"
501 " expected - allowing transfer\n");
504 if (pc->flags & PC_FLAG_WRITING)
505 xferfunc = hwif->output_data;
507 xferfunc = hwif->input_data;
510 xferfunc(drive, NULL, pc->cur_pos, bcount);
512 ide_floppy_io_buffers(drive, pc, bcount,
513 !!(pc->flags & PC_FLAG_WRITING));
515 /* Update the current position */
516 pc->xferred += bcount;
517 pc->cur_pos += bcount;
519 /* And set the interrupt handler again */
520 ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);
525 * What we have here is a classic case of a top half / bottom half interrupt
526 * service routine. In interrupt mode, the device sends an interrupt to signal
527 * that it is ready to receive a packet. However, we need to delay about 2-3
528 * ticks before issuing the packet or we gets in trouble.
530 * So, follow carefully. transfer_pc1 is called as an interrupt (or directly).
531 * In either case, when the device says it's ready for a packet, we schedule
532 * the packet transfer to occur about 2-3 ticks later in transfer_pc2.
534 static int idefloppy_transfer_pc2(ide_drive_t *drive)
536 idefloppy_floppy_t *floppy = drive->driver_data;
538 /* Send the actual packet */
539 drive->hwif->output_data(drive, NULL, floppy->pc->c, 12);
541 /* Timeout for the packet command */
542 return IDEFLOPPY_WAIT_CMD;
545 static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive)
547 ide_hwif_t *hwif = drive->hwif;
548 idefloppy_floppy_t *floppy = drive->driver_data;
549 ide_expiry_t *expiry;
550 unsigned int timeout;
551 ide_startstop_t startstop;
554 if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
555 printk(KERN_ERR "ide-floppy: Strange, packet command "
556 "initiated yet DRQ isn't asserted\n");
559 ireason = hwif->INB(hwif->io_ports.nsect_addr);
560 if ((ireason & CD) == 0 || (ireason & IO)) {
561 printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) "
562 "while issuing a packet command\n");
563 return ide_do_reset(drive);
566 * The following delay solves a problem with ATAPI Zip 100 drives
567 * where the Busy flag was apparently being deasserted before the
568 * unit was ready to receive data. This was happening on a
569 * 1200 MHz Athlon system. 10/26/01 25msec is too short,
570 * 40 and 50msec work well. idefloppy_pc_intr will not be actually
571 * used until after the packet is moved in about 50 msec.
573 if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) {
574 timeout = floppy->ticks;
575 expiry = &idefloppy_transfer_pc2;
577 timeout = IDEFLOPPY_WAIT_CMD;
581 ide_set_handler(drive, &idefloppy_pc_intr, timeout, expiry);
583 if ((floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) == 0)
584 /* Send the actual packet */
585 hwif->output_data(drive, NULL, floppy->pc->c, 12);
590 static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
591 struct ide_atapi_pc *pc)
593 /* supress error messages resulting from Medium not present */
594 if (floppy->sense_key == 0x02 &&
595 floppy->asc == 0x3a &&
596 floppy->ascq == 0x00)
599 printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x, key = %2x, "
600 "asc = %2x, ascq = %2x\n",
601 floppy->drive->name, pc->c[0], floppy->sense_key,
602 floppy->asc, floppy->ascq);
606 static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
607 struct ide_atapi_pc *pc)
609 idefloppy_floppy_t *floppy = drive->driver_data;
610 ide_hwif_t *hwif = drive->hwif;
614 if (floppy->failed_pc == NULL &&
615 pc->c[0] != GPCMD_REQUEST_SENSE)
616 floppy->failed_pc = pc;
617 /* Set the current packet command */
620 if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) {
621 if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR))
622 ide_floppy_report_error(floppy, pc);
624 pc->error = IDEFLOPPY_ERROR_GENERAL;
626 floppy->failed_pc = NULL;
627 pc->idefloppy_callback(drive);
631 debug_log("Retry number - %d\n", pc->retries);
634 /* We haven't transferred any data yet */
636 pc->cur_pos = pc->buf;
637 bcount = min(pc->req_xfer, 63 * 1024);
639 if (pc->flags & PC_FLAG_DMA_ERROR) {
640 pc->flags &= ~PC_FLAG_DMA_ERROR;
645 if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma)
646 dma = !hwif->dma_ops->dma_setup(drive);
648 ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma);
651 /* Begin DMA, if necessary */
652 pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
653 hwif->dma_ops->dma_start(drive);
656 if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) {
657 /* Issue the packet command */
658 ide_execute_command(drive, WIN_PACKETCMD,
659 &idefloppy_transfer_pc1,
664 /* Issue the packet command */
665 ide_execute_pkt_cmd(drive);
666 return idefloppy_transfer_pc1(drive);
670 static void idefloppy_rw_callback(ide_drive_t *drive)
672 debug_log("Reached %s\n", __func__);
674 idefloppy_end_request(drive, 1, 0);
678 static void idefloppy_create_prevent_cmd(struct ide_atapi_pc *pc, int prevent)
680 debug_log("creating prevent removal command, prevent = %d\n", prevent);
682 idefloppy_init_pc(pc);
683 pc->c[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL;
687 static void idefloppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
689 idefloppy_init_pc(pc);
690 pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES;
696 static void idefloppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b,
699 idefloppy_init_pc(pc);
700 pc->c[0] = GPCMD_FORMAT_UNIT;
703 memset(pc->buf, 0, 12);
705 /* Default format list header, u8 1: FOV/DCRT/IMM bits set */
707 if (flags & 1) /* Verify bit on... */
708 pc->buf[1] ^= 0x20; /* ... turn off DCRT bit */
711 put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buf[4]));
712 put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buf[8]));
714 pc->flags |= PC_FLAG_WRITING;
717 /* A mode sense command is used to "sense" floppy parameters. */
718 static void idefloppy_create_mode_sense_cmd(struct ide_atapi_pc *pc,
719 u8 page_code, u8 type)
721 u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */
723 idefloppy_init_pc(pc);
724 pc->c[0] = GPCMD_MODE_SENSE_10;
726 pc->c[2] = page_code + (type << 6);
729 case IDEFLOPPY_CAPABILITIES_PAGE:
732 case IDEFLOPPY_FLEXIBLE_DISK_PAGE:
736 printk(KERN_ERR "ide-floppy: unsupported page code "
737 "in create_mode_sense_cmd\n");
739 put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]);
740 pc->req_xfer = length;
743 static void idefloppy_create_start_stop_cmd(struct ide_atapi_pc *pc, int start)
745 idefloppy_init_pc(pc);
746 pc->c[0] = GPCMD_START_STOP_UNIT;
750 static void idefloppy_create_test_unit_ready_cmd(struct ide_atapi_pc *pc)
752 idefloppy_init_pc(pc);
753 pc->c[0] = GPCMD_TEST_UNIT_READY;
756 static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
757 struct ide_atapi_pc *pc, struct request *rq,
758 unsigned long sector)
760 int block = sector / floppy->bs_factor;
761 int blocks = rq->nr_sectors / floppy->bs_factor;
762 int cmd = rq_data_dir(rq);
764 debug_log("create_rw10_cmd: block == %d, blocks == %d\n",
767 idefloppy_init_pc(pc);
768 pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10;
769 put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]);
770 put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]);
772 pc->idefloppy_callback = &idefloppy_rw_callback;
774 pc->b_count = cmd == READ ? 0 : rq->bio->bi_size;
775 if (rq->cmd_flags & REQ_RW)
776 pc->flags |= PC_FLAG_WRITING;
778 pc->req_xfer = pc->buf_size = blocks * floppy->block_size;
779 pc->flags |= PC_FLAG_DMA_RECOMMENDED;
782 static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
783 struct ide_atapi_pc *pc, struct request *rq)
785 idefloppy_init_pc(pc);
786 pc->idefloppy_callback = &idefloppy_rw_callback;
787 memcpy(pc->c, rq->cmd, sizeof(pc->c));
789 pc->b_count = rq->data_len;
790 if (rq->data_len && rq_data_dir(rq) == WRITE)
791 pc->flags |= PC_FLAG_WRITING;
794 pc->flags |= PC_FLAG_DMA_RECOMMENDED;
796 * possibly problematic, doesn't look like ide-floppy correctly
797 * handled scattered requests if dma fails...
799 pc->req_xfer = pc->buf_size = rq->data_len;
802 static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
803 struct request *rq, sector_t block_s)
805 idefloppy_floppy_t *floppy = drive->driver_data;
806 struct ide_atapi_pc *pc;
807 unsigned long block = (unsigned long)block_s;
809 debug_log("dev: %s, cmd_type: %x, errors: %d\n",
810 rq->rq_disk ? rq->rq_disk->disk_name : "?",
811 rq->cmd_type, rq->errors);
812 debug_log("sector: %ld, nr_sectors: %ld, "
813 "current_nr_sectors: %d\n", (long)rq->sector,
814 rq->nr_sectors, rq->current_nr_sectors);
816 if (rq->errors >= ERROR_MAX) {
817 if (floppy->failed_pc)
818 ide_floppy_report_error(floppy, floppy->failed_pc);
820 printk(KERN_ERR "ide-floppy: %s: I/O error\n",
822 idefloppy_end_request(drive, 0, 0);
825 if (blk_fs_request(rq)) {
826 if (((long)rq->sector % floppy->bs_factor) ||
827 (rq->nr_sectors % floppy->bs_factor)) {
828 printk(KERN_ERR "%s: unsupported r/w request size\n",
830 idefloppy_end_request(drive, 0, 0);
833 pc = idefloppy_next_pc_storage(drive);
834 idefloppy_create_rw_cmd(floppy, pc, rq, block);
835 } else if (blk_special_request(rq)) {
836 pc = (struct ide_atapi_pc *) rq->buffer;
837 } else if (blk_pc_request(rq)) {
838 pc = idefloppy_next_pc_storage(drive);
839 idefloppy_blockpc_cmd(floppy, pc, rq);
841 blk_dump_rq_flags(rq,
842 "ide-floppy: unsupported command in queue");
843 idefloppy_end_request(drive, 0, 0);
848 return idefloppy_issue_pc(drive, pc);
852 * Add a special packet command request to the tail of the request queue,
853 * and wait for it to be serviced.
855 static int idefloppy_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
857 struct ide_floppy_obj *floppy = drive->driver_data;
861 rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
862 rq->buffer = (char *) pc;
863 rq->cmd_type = REQ_TYPE_SPECIAL;
864 error = blk_execute_rq(drive->queue, floppy->disk, rq, 0);
871 * Look at the flexible disk page parameters. We ignore the CHS capacity
872 * parameters and use the LBA parameters instead.
874 static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
876 idefloppy_floppy_t *floppy = drive->driver_data;
877 struct ide_atapi_pc pc;
879 int capacity, lba_capacity;
880 u16 transfer_rate, sector_size, cyls, rpm;
883 idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE,
886 if (idefloppy_queue_pc_tail(drive, &pc)) {
887 printk(KERN_ERR "ide-floppy: Can't get flexible disk page"
891 floppy->wp = !!(pc.buf[3] & 0x80);
892 set_disk_ro(floppy->disk, floppy->wp);
895 transfer_rate = be16_to_cpu(*(u16 *)&pc.buf[8 + 2]);
896 sector_size = be16_to_cpu(*(u16 *)&pc.buf[8 + 6]);
897 cyls = be16_to_cpu(*(u16 *)&pc.buf[8 + 8]);
898 rpm = be16_to_cpu(*(u16 *)&pc.buf[8 + 28]);
899 heads = pc.buf[8 + 4];
900 sectors = pc.buf[8 + 5];
902 capacity = cyls * heads * sectors * sector_size;
904 if (memcmp(page, &floppy->flexible_disk_page, 32))
905 printk(KERN_INFO "%s: %dkB, %d/%d/%d CHS, %d kBps, "
906 "%d sector size, %d rpm\n",
907 drive->name, capacity / 1024, cyls, heads,
908 sectors, transfer_rate / 8, sector_size, rpm);
910 memcpy(&floppy->flexible_disk_page, page, 32);
911 drive->bios_cyl = cyls;
912 drive->bios_head = heads;
913 drive->bios_sect = sectors;
914 lba_capacity = floppy->blocks * floppy->block_size;
916 if (capacity < lba_capacity) {
917 printk(KERN_NOTICE "%s: The disk reports a capacity of %d "
918 "bytes, but the drive only handles %d\n",
919 drive->name, lba_capacity, capacity);
920 floppy->blocks = floppy->block_size ?
921 capacity / floppy->block_size : 0;
926 static int idefloppy_get_sfrp_bit(ide_drive_t *drive)
928 idefloppy_floppy_t *floppy = drive->driver_data;
929 struct ide_atapi_pc pc;
932 idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE,
935 pc.flags |= PC_FLAG_SUPPRESS_ERROR;
936 if (idefloppy_queue_pc_tail(drive, &pc))
939 floppy->srfp = pc.buf[8 + 2] & 0x40;
944 * Determine if a media is present in the floppy drive, and if so, its LBA
947 static int ide_floppy_get_capacity(ide_drive_t *drive)
949 idefloppy_floppy_t *floppy = drive->driver_data;
950 struct ide_atapi_pc pc;
952 u8 header_len, desc_cnt;
953 int i, rc = 1, blocks, length;
956 drive->bios_head = drive->bios_sect = 0;
958 floppy->bs_factor = 1;
959 set_capacity(floppy->disk, 0);
961 idefloppy_create_read_capacity_cmd(&pc);
962 if (idefloppy_queue_pc_tail(drive, &pc)) {
963 printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
966 header_len = pc.buf[3];
967 cap_desc = &pc.buf[4];
968 desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
970 for (i = 0; i < desc_cnt; i++) {
971 unsigned int desc_start = 4 + i*8;
973 blocks = be32_to_cpu(*(u32 *)&pc.buf[desc_start]);
974 length = be16_to_cpu(*(u16 *)&pc.buf[desc_start + 6]);
976 debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n",
977 i, blocks * length / 1024, blocks, length);
982 * the code below is valid only for the 1st descriptor, ie i=0
985 switch (pc.buf[desc_start + 4] & 0x03) {
986 /* Clik! drive returns this instead of CAPACITY_CURRENT */
987 case CAPACITY_UNFORMATTED:
988 if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE))
990 * If it is not a clik drive, break out
991 * (maintains previous driver behaviour)
994 case CAPACITY_CURRENT:
995 /* Normal Zip/LS-120 disks */
996 if (memcmp(cap_desc, &floppy->cap_desc, 8))
997 printk(KERN_INFO "%s: %dkB, %d blocks, %d "
998 "sector size\n", drive->name,
999 blocks * length / 1024, blocks, length);
1000 memcpy(&floppy->cap_desc, cap_desc, 8);
1002 if (!length || length % 512) {
1003 printk(KERN_NOTICE "%s: %d bytes block size "
1004 "not supported\n", drive->name, length);
1006 floppy->blocks = blocks;
1007 floppy->block_size = length;
1008 floppy->bs_factor = length / 512;
1009 if (floppy->bs_factor != 1)
1010 printk(KERN_NOTICE "%s: warning: non "
1011 "512 bytes block size not "
1012 "fully supported\n",
1017 case CAPACITY_NO_CARTRIDGE:
1019 * This is a KERN_ERR so it appears on screen
1020 * for the user to see
1022 printk(KERN_ERR "%s: No disk in drive\n", drive->name);
1024 case CAPACITY_INVALID:
1025 printk(KERN_ERR "%s: Invalid capacity for disk "
1026 "in drive\n", drive->name);
1029 debug_log("Descriptor 0 Code: %d\n",
1030 pc.buf[desc_start + 4] & 0x03);
1033 /* Clik! disk does not support get_flexible_disk_page */
1034 if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE))
1035 (void) ide_floppy_get_flexible_disk_page(drive);
1037 set_capacity(floppy->disk, floppy->blocks * floppy->bs_factor);
1042 * Obtain the list of formattable capacities.
1043 * Very similar to ide_floppy_get_capacity, except that we push the capacity
1044 * descriptors to userland, instead of our own structures.
1046 * Userland gives us the following structure:
1048 * struct idefloppy_format_capacities {
1056 * userland initializes nformats to the number of allocated formats[] records.
1057 * On exit we set nformats to the number of records we've actually initialized.
1060 static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
1062 struct ide_atapi_pc pc;
1063 u8 header_len, desc_cnt;
1064 int i, blocks, length, u_array_size, u_index;
1067 if (get_user(u_array_size, arg))
1070 if (u_array_size <= 0)
1073 idefloppy_create_read_capacity_cmd(&pc);
1074 if (idefloppy_queue_pc_tail(drive, &pc)) {
1075 printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
1078 header_len = pc.buf[3];
1079 desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
1085 * We always skip the first capacity descriptor. That's the current
1086 * capacity. We are interested in the remaining descriptors, the
1087 * formattable capacities.
1089 for (i = 1; i < desc_cnt; i++) {
1090 unsigned int desc_start = 4 + i*8;
1092 if (u_index >= u_array_size)
1093 break; /* User-supplied buffer too small */
1095 blocks = be32_to_cpu(*(u32 *)&pc.buf[desc_start]);
1096 length = be16_to_cpu(*(u16 *)&pc.buf[desc_start + 6]);
1098 if (put_user(blocks, argp))
1102 if (put_user(length, argp))
1109 if (put_user(u_index, arg))
1115 * Get ATAPI_FORMAT_UNIT progress indication.
1117 * Userland gives a pointer to an int. The int is set to a progress
1118 * indicator 0-65536, with 65536=100%.
1120 * If the drive does not support format progress indication, we just check
1121 * the dsc bit, and return either 0 or 65536.
1124 static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)
1126 idefloppy_floppy_t *floppy = drive->driver_data;
1127 struct ide_atapi_pc pc;
1128 int progress_indication = 0x10000;
1131 idefloppy_create_request_sense_cmd(&pc);
1132 if (idefloppy_queue_pc_tail(drive, &pc))
1135 if (floppy->sense_key == 2 &&
1138 progress_indication = floppy->progress_indication;
1140 /* Else assume format_unit has finished, and we're at 0x10000 */
1142 unsigned long flags;
1145 local_irq_save(flags);
1146 stat = ide_read_status(drive);
1147 local_irq_restore(flags);
1149 progress_indication = ((stat & SEEK_STAT) == 0) ? 0 : 0x10000;
1151 if (put_user(progress_indication, arg))
1157 static sector_t idefloppy_capacity(ide_drive_t *drive)
1159 idefloppy_floppy_t *floppy = drive->driver_data;
1160 unsigned long capacity = floppy->blocks * floppy->bs_factor;
1166 * Check whether we can support a drive, based on the ATAPI IDENTIFY command
1169 static int idefloppy_identify_device(ide_drive_t *drive, struct hd_driveid *id)
1172 u8 device_type, protocol, removable, drq_type, packet_size;
1174 *((u16 *) &gcw) = id->config;
1176 device_type = gcw[1] & 0x1F;
1177 removable = (gcw[0] & 0x80) >> 7;
1178 protocol = (gcw[1] & 0xC0) >> 6;
1179 drq_type = (gcw[0] & 0x60) >> 5;
1180 packet_size = gcw[0] & 0x03;
1183 /* kludge for Apple PowerBook internal zip */
1184 if (device_type == 5 &&
1185 !strstr(id->model, "CD-ROM") && strstr(id->model, "ZIP"))
1190 printk(KERN_ERR "ide-floppy: Protocol (0x%02x) is not ATAPI\n",
1192 else if (device_type != 0)
1193 printk(KERN_ERR "ide-floppy: Device type (0x%02x) is not set "
1194 "to floppy\n", device_type);
1195 else if (!removable)
1196 printk(KERN_ERR "ide-floppy: The removable flag is not set\n");
1197 else if (drq_type == 3)
1198 printk(KERN_ERR "ide-floppy: Sorry, DRQ type (0x%02x) not "
1199 "supported\n", drq_type);
1200 else if (packet_size != 0)
1201 printk(KERN_ERR "ide-floppy: Packet size (0x%02x) is not 12 "
1202 "bytes\n", packet_size);
1208 #ifdef CONFIG_IDE_PROC_FS
1209 static void idefloppy_add_settings(ide_drive_t *drive)
1211 idefloppy_floppy_t *floppy = drive->driver_data;
1213 ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1,
1214 &drive->bios_cyl, NULL);
1215 ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1,
1216 &drive->bios_head, NULL);
1217 ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1,
1218 &drive->bios_sect, NULL);
1219 ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1,
1220 &floppy->ticks, NULL);
1223 static inline void idefloppy_add_settings(ide_drive_t *drive) { ; }
1226 static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
1230 *((u16 *) &gcw) = drive->id->config;
1231 floppy->pc = floppy->pc_stack;
1233 if (((gcw[0] & 0x60) >> 5) == 1)
1234 floppy->flags |= IDEFLOPPY_FLAG_DRQ_INTERRUPT;
1236 * We used to check revisions here. At this point however I'm giving up.
1237 * Just assume they are all broken, its easier.
1239 * The actual reason for the workarounds was likely a driver bug after
1240 * all rather than a firmware bug, and the workaround below used to hide
1241 * it. It should be fixed as of version 1.9, but to be on the safe side
1242 * we'll leave the limitation below for the 2.2.x tree.
1244 if (!strncmp(drive->id->model, "IOMEGA ZIP 100 ATAPI", 20)) {
1245 floppy->flags |= IDEFLOPPY_FLAG_ZIP_DRIVE;
1246 /* This value will be visible in the /proc/ide/hdx/settings */
1247 floppy->ticks = IDEFLOPPY_TICKS_DELAY;
1248 blk_queue_max_sectors(drive->queue, 64);
1252 * Guess what? The IOMEGA Clik! drive also needs the above fix. It makes
1253 * nasty clicking noises without it, so please don't remove this.
1255 if (strncmp(drive->id->model, "IOMEGA Clik!", 11) == 0) {
1256 blk_queue_max_sectors(drive->queue, 64);
1257 floppy->flags |= IDEFLOPPY_FLAG_CLIK_DRIVE;
1260 (void) ide_floppy_get_capacity(drive);
1261 idefloppy_add_settings(drive);
1264 static void ide_floppy_remove(ide_drive_t *drive)
1266 idefloppy_floppy_t *floppy = drive->driver_data;
1267 struct gendisk *g = floppy->disk;
1269 ide_proc_unregister_driver(drive, floppy->driver);
1273 ide_floppy_put(floppy);
1276 static void idefloppy_cleanup_obj(struct kref *kref)
1278 struct ide_floppy_obj *floppy = to_ide_floppy(kref);
1279 ide_drive_t *drive = floppy->drive;
1280 struct gendisk *g = floppy->disk;
1282 drive->driver_data = NULL;
1283 g->private_data = NULL;
1288 #ifdef CONFIG_IDE_PROC_FS
1289 static int proc_idefloppy_read_capacity(char *page, char **start, off_t off,
1290 int count, int *eof, void *data)
1292 ide_drive_t*drive = (ide_drive_t *)data;
1295 len = sprintf(page, "%llu\n", (long long)idefloppy_capacity(drive));
1296 PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
1299 static ide_proc_entry_t idefloppy_proc[] = {
1300 { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL },
1301 { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
1302 { NULL, 0, NULL, NULL }
1304 #endif /* CONFIG_IDE_PROC_FS */
1306 static int ide_floppy_probe(ide_drive_t *);
1308 static ide_driver_t idefloppy_driver = {
1310 .owner = THIS_MODULE,
1311 .name = "ide-floppy",
1312 .bus = &ide_bus_type,
1314 .probe = ide_floppy_probe,
1315 .remove = ide_floppy_remove,
1316 .version = IDEFLOPPY_VERSION,
1317 .media = ide_floppy,
1318 .supports_dsc_overlap = 0,
1319 .do_request = idefloppy_do_request,
1320 .end_request = idefloppy_end_request,
1321 .error = __ide_error,
1322 .abort = __ide_abort,
1323 #ifdef CONFIG_IDE_PROC_FS
1324 .proc = idefloppy_proc,
1328 static int idefloppy_open(struct inode *inode, struct file *filp)
1330 struct gendisk *disk = inode->i_bdev->bd_disk;
1331 struct ide_floppy_obj *floppy;
1333 struct ide_atapi_pc pc;
1336 debug_log("Reached %s\n", __func__);
1338 floppy = ide_floppy_get(disk);
1342 drive = floppy->drive;
1346 if (floppy->openers == 1) {
1347 floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
1350 idefloppy_create_test_unit_ready_cmd(&pc);
1351 if (idefloppy_queue_pc_tail(drive, &pc)) {
1352 idefloppy_create_start_stop_cmd(&pc, 1);
1353 (void) idefloppy_queue_pc_tail(drive, &pc);
1356 if (ide_floppy_get_capacity(drive)
1357 && (filp->f_flags & O_NDELAY) == 0
1359 * Allow O_NDELAY to open a drive without a disk, or with an
1360 * unreadable disk, so that we can get the format capacity
1361 * of the drive or begin the format - Sam
1365 goto out_put_floppy;
1368 if (floppy->wp && (filp->f_mode & 2)) {
1370 goto out_put_floppy;
1372 floppy->flags |= IDEFLOPPY_FLAG_MEDIA_CHANGED;
1373 /* IOMEGA Clik! drives do not support lock/unlock commands */
1374 if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) {
1375 idefloppy_create_prevent_cmd(&pc, 1);
1376 (void) idefloppy_queue_pc_tail(drive, &pc);
1378 check_disk_change(inode->i_bdev);
1379 } else if (floppy->flags & IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS) {
1381 goto out_put_floppy;
1387 ide_floppy_put(floppy);
1391 static int idefloppy_release(struct inode *inode, struct file *filp)
1393 struct gendisk *disk = inode->i_bdev->bd_disk;
1394 struct ide_floppy_obj *floppy = ide_floppy_g(disk);
1395 ide_drive_t *drive = floppy->drive;
1396 struct ide_atapi_pc pc;
1398 debug_log("Reached %s\n", __func__);
1400 if (floppy->openers == 1) {
1401 /* IOMEGA Clik! drives do not support lock/unlock commands */
1402 if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) {
1403 idefloppy_create_prevent_cmd(&pc, 0);
1404 (void) idefloppy_queue_pc_tail(drive, &pc);
1407 floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
1412 ide_floppy_put(floppy);
1417 static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo)
1419 struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk);
1420 ide_drive_t *drive = floppy->drive;
1422 geo->heads = drive->bios_head;
1423 geo->sectors = drive->bios_sect;
1424 geo->cylinders = (u16)drive->bios_cyl; /* truncate */
1428 static int ide_floppy_lockdoor(idefloppy_floppy_t *floppy,
1429 struct ide_atapi_pc *pc, unsigned long arg, unsigned int cmd)
1431 if (floppy->openers > 1)
1434 /* The IOMEGA Clik! Drive doesn't support this command -
1435 * no room for an eject mechanism */
1436 if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) {
1437 int prevent = arg ? 1 : 0;
1439 if (cmd == CDROMEJECT)
1442 idefloppy_create_prevent_cmd(pc, prevent);
1443 (void) idefloppy_queue_pc_tail(floppy->drive, pc);
1446 if (cmd == CDROMEJECT) {
1447 idefloppy_create_start_stop_cmd(pc, 2);
1448 (void) idefloppy_queue_pc_tail(floppy->drive, pc);
1454 static int ide_floppy_format_unit(idefloppy_floppy_t *floppy,
1457 int blocks, length, flags, err = 0;
1458 struct ide_atapi_pc pc;
1460 if (floppy->openers > 1) {
1461 /* Don't format if someone is using the disk */
1462 floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
1466 floppy->flags |= IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
1469 * Send ATAPI_FORMAT_UNIT to the drive.
1471 * Userland gives us the following structure:
1473 * struct idefloppy_format_command {
1479 * flags is a bitmask, currently, the only defined flag is:
1481 * 0x01 - verify media after format.
1483 if (get_user(blocks, arg) ||
1484 get_user(length, arg+1) ||
1485 get_user(flags, arg+2)) {
1490 (void) idefloppy_get_sfrp_bit(floppy->drive);
1491 idefloppy_create_format_unit_cmd(&pc, blocks, length, flags);
1493 if (idefloppy_queue_pc_tail(floppy->drive, &pc))
1498 floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
1503 static int idefloppy_ioctl(struct inode *inode, struct file *file,
1504 unsigned int cmd, unsigned long arg)
1506 struct block_device *bdev = inode->i_bdev;
1507 struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk);
1508 ide_drive_t *drive = floppy->drive;
1509 struct ide_atapi_pc pc;
1510 void __user *argp = (void __user *)arg;
1516 case CDROM_LOCKDOOR:
1517 return ide_floppy_lockdoor(floppy, &pc, arg, cmd);
1518 case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
1520 case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
1521 return ide_floppy_get_format_capacities(drive, argp);
1522 case IDEFLOPPY_IOCTL_FORMAT_START:
1523 if (!(file->f_mode & 2))
1526 return ide_floppy_format_unit(floppy, (int __user *)arg);
1527 case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
1528 return idefloppy_get_format_progress(drive, argp);
1532 * skip SCSI_IOCTL_SEND_COMMAND (deprecated)
1533 * and CDROM_SEND_PACKET (legacy) ioctls
1535 if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND)
1536 err = scsi_cmd_ioctl(file, bdev->bd_disk->queue,
1537 bdev->bd_disk, cmd, argp);
1542 err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
1547 static int idefloppy_media_changed(struct gendisk *disk)
1549 struct ide_floppy_obj *floppy = ide_floppy_g(disk);
1550 ide_drive_t *drive = floppy->drive;
1553 /* do not scan partitions twice if this is a removable device */
1554 if (drive->attach) {
1558 ret = !!(floppy->flags & IDEFLOPPY_FLAG_MEDIA_CHANGED);
1559 floppy->flags &= ~IDEFLOPPY_FLAG_MEDIA_CHANGED;
1563 static int idefloppy_revalidate_disk(struct gendisk *disk)
1565 struct ide_floppy_obj *floppy = ide_floppy_g(disk);
1566 set_capacity(disk, idefloppy_capacity(floppy->drive));
1570 static struct block_device_operations idefloppy_ops = {
1571 .owner = THIS_MODULE,
1572 .open = idefloppy_open,
1573 .release = idefloppy_release,
1574 .ioctl = idefloppy_ioctl,
1575 .getgeo = idefloppy_getgeo,
1576 .media_changed = idefloppy_media_changed,
1577 .revalidate_disk = idefloppy_revalidate_disk
1580 static int ide_floppy_probe(ide_drive_t *drive)
1582 idefloppy_floppy_t *floppy;
1585 if (!strstr("ide-floppy", drive->driver_req))
1587 if (!drive->present)
1589 if (drive->media != ide_floppy)
1591 if (!idefloppy_identify_device(drive, drive->id)) {
1592 printk(KERN_ERR "ide-floppy: %s: not supported by this version"
1593 " of ide-floppy\n", drive->name);
1597 printk(KERN_INFO "ide-floppy: passing drive %s to ide-scsi"
1598 " emulation.\n", drive->name);
1601 floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL);
1603 printk(KERN_ERR "ide-floppy: %s: Can't allocate a floppy"
1604 " structure\n", drive->name);
1608 g = alloc_disk(1 << PARTN_BITS);
1610 goto out_free_floppy;
1612 ide_init_disk(g, drive);
1614 ide_proc_register_driver(drive, &idefloppy_driver);
1616 kref_init(&floppy->kref);
1618 floppy->drive = drive;
1619 floppy->driver = &idefloppy_driver;
1622 g->private_data = &floppy->driver;
1624 drive->driver_data = floppy;
1626 idefloppy_setup(drive, floppy);
1628 g->minors = 1 << PARTN_BITS;
1629 g->driverfs_dev = &drive->gendev;
1630 g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0;
1631 g->fops = &idefloppy_ops;
1642 static void __exit idefloppy_exit(void)
1644 driver_unregister(&idefloppy_driver.gen_driver);
1647 static int __init idefloppy_init(void)
1649 printk("ide-floppy driver " IDEFLOPPY_VERSION "\n");
1650 return driver_register(&idefloppy_driver.gen_driver);
1653 MODULE_ALIAS("ide:*m-floppy*");
1654 module_init(idefloppy_init);
1655 module_exit(idefloppy_exit);
1656 MODULE_LICENSE("GPL");
1657 MODULE_DESCRIPTION("ATAPI FLOPPY Driver");