Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux...
[linux-2.6] / drivers / usb / serial / whiteheat.c
1 /*
2  * USB ConnectTech WhiteHEAT driver
3  *
4  *      Copyright (C) 2002
5  *          Connect Tech Inc.
6  *
7  *      Copyright (C) 1999 - 2001
8  *          Greg Kroah-Hartman (greg@kroah.com)
9  *
10  *      This program is free software; you can redistribute it and/or modify
11  *      it under the terms of the GNU General Public License as published by
12  *      the Free Software Foundation; either version 2 of the License, or
13  *      (at your option) any later version.
14  *
15  * See Documentation/usb/usb-serial.txt for more information on using this driver
16  *
17  * (10/09/2002) Stuart MacDonald (stuartm@connecttech.com)
18  *      Upgrade to full working driver
19  *
20  * (05/30/2001) gkh
21  *      switched from using spinlock to a semaphore, which fixes lots of problems.
22  *
23  * (04/08/2001) gb
24  *      Identify version on module load.
25  * 
26  * 2001_Mar_19 gkh
27  *      Fixed MOD_INC and MOD_DEC logic, the ability to open a port more 
28  *      than once, and the got the proper usb_device_id table entries so
29  *      the driver works again.
30  *
31  * (11/01/2000) Adam J. Richter
32  *      usb_device_id table support
33  * 
34  * (10/05/2000) gkh
35  *      Fixed bug with urb->dev not being set properly, now that the usb
36  *      core needs it.
37  * 
38  * (10/03/2000) smd
39  *      firmware is improved to guard against crap sent to device
40  *      firmware now replies CMD_FAILURE on bad things
41  *      read_callback fix you provided for private info struct
42  *      command_finished now indicates success or fail
43  *      setup_port struct now packed to avoid gcc padding
44  *      firmware uses 1 based port numbering, driver now handles that
45  *
46  * (09/11/2000) gkh
47  *      Removed DEBUG #ifdefs with call to usb_serial_debug_data
48  *
49  * (07/19/2000) gkh
50  *      Added module_init and module_exit functions to handle the fact that this
51  *      driver is a loadable module now.
52  *      Fixed bug with port->minor that was found by Al Borchers
53  *
54  * (07/04/2000) gkh
55  *      Added support for port settings. Baud rate can now be changed. Line signals
56  *      are not transferred to and from the tty layer yet, but things seem to be 
57  *      working well now.
58  *
59  * (05/04/2000) gkh
60  *      First cut at open and close commands. Data can flow through the ports at
61  *      default speeds now.
62  *
63  * (03/26/2000) gkh
64  *      Split driver up into device specific pieces.
65  * 
66  */
67
68 #include <linux/kernel.h>
69 #include <linux/errno.h>
70 #include <linux/init.h>
71 #include <linux/slab.h>
72 #include <linux/tty.h>
73 #include <linux/tty_driver.h>
74 #include <linux/tty_flip.h>
75 #include <linux/module.h>
76 #include <linux/spinlock.h>
77 #include <linux/mutex.h>
78 #include <asm/uaccess.h>
79 #include <asm/termbits.h>
80 #include <linux/usb.h>
81 #include <linux/serial_reg.h>
82 #include <linux/serial.h>
83 #include <linux/usb/serial.h>
84 #include "whiteheat_fw.h"               /* firmware for the ConnectTech WhiteHEAT device */
85 #include "whiteheat.h"                  /* WhiteHEAT specific commands */
86
87 static int debug;
88
89 #ifndef CMSPAR
90 #define CMSPAR 0
91 #endif
92
93 /*
94  * Version Information
95  */
96 #define DRIVER_VERSION "v2.0"
97 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>"
98 #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver"
99
100 #define CONNECT_TECH_VENDOR_ID          0x0710
101 #define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001
102 #define CONNECT_TECH_WHITE_HEAT_ID      0x8001
103
104 /*
105    ID tables for whiteheat are unusual, because we want to different
106    things for different versions of the device.  Eventually, this
107    will be doable from a single table.  But, for now, we define two
108    separate ID tables, and then a third table that combines them
109    just for the purpose of exporting the autoloading information.
110 */
111 static struct usb_device_id id_table_std [] = {
112         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
113         { }                                             /* Terminating entry */
114 };
115
116 static struct usb_device_id id_table_prerenumeration [] = {
117         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
118         { }                                             /* Terminating entry */
119 };
120
121 static struct usb_device_id id_table_combined [] = {
122         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
123         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
124         { }                                             /* Terminating entry */
125 };
126
127 MODULE_DEVICE_TABLE (usb, id_table_combined);
128
129 static struct usb_driver whiteheat_driver = {
130         .name =         "whiteheat",
131         .probe =        usb_serial_probe,
132         .disconnect =   usb_serial_disconnect,
133         .id_table =     id_table_combined,
134         .no_dynamic_id =        1,
135 };
136
137 /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
138 static int  whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id);
139 static int  whiteheat_firmware_attach   (struct usb_serial *serial);
140
141 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
142 static int  whiteheat_attach            (struct usb_serial *serial);
143 static void whiteheat_shutdown          (struct usb_serial *serial);
144 static int  whiteheat_open              (struct usb_serial_port *port, struct file *filp);
145 static void whiteheat_close             (struct usb_serial_port *port, struct file *filp);
146 static int  whiteheat_write             (struct usb_serial_port *port, const unsigned char *buf, int count);
147 static int  whiteheat_write_room        (struct usb_serial_port *port);
148 static int  whiteheat_ioctl             (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
149 static void whiteheat_set_termios       (struct usb_serial_port *port, struct ktermios * old);
150 static int  whiteheat_tiocmget          (struct usb_serial_port *port, struct file *file);
151 static int  whiteheat_tiocmset          (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
152 static void whiteheat_break_ctl         (struct usb_serial_port *port, int break_state);
153 static int  whiteheat_chars_in_buffer   (struct usb_serial_port *port);
154 static void whiteheat_throttle          (struct usb_serial_port *port);
155 static void whiteheat_unthrottle        (struct usb_serial_port *port);
156 static void whiteheat_read_callback     (struct urb *urb);
157 static void whiteheat_write_callback    (struct urb *urb);
158
159 static struct usb_serial_driver whiteheat_fake_device = {
160         .driver = {
161                 .owner =        THIS_MODULE,
162                 .name =         "whiteheatnofirm",
163         },
164         .description =          "Connect Tech - WhiteHEAT - (prerenumeration)",
165         .usb_driver =           &whiteheat_driver,
166         .id_table =             id_table_prerenumeration,
167         .num_ports =            1,
168         .probe =                whiteheat_firmware_download,
169         .attach =               whiteheat_firmware_attach,
170 };
171
172 static struct usb_serial_driver whiteheat_device = {
173         .driver = {
174                 .owner =        THIS_MODULE,
175                 .name =         "whiteheat",
176         },
177         .description =          "Connect Tech - WhiteHEAT",
178         .usb_driver =           &whiteheat_driver,
179         .id_table =             id_table_std,
180         .num_ports =            4,
181         .attach =               whiteheat_attach,
182         .shutdown =             whiteheat_shutdown,
183         .open =                 whiteheat_open,
184         .close =                whiteheat_close,
185         .write =                whiteheat_write,
186         .write_room =           whiteheat_write_room,
187         .ioctl =                whiteheat_ioctl,
188         .set_termios =          whiteheat_set_termios,
189         .break_ctl =            whiteheat_break_ctl,
190         .tiocmget =             whiteheat_tiocmget,
191         .tiocmset =             whiteheat_tiocmset,
192         .chars_in_buffer =      whiteheat_chars_in_buffer,
193         .throttle =             whiteheat_throttle,
194         .unthrottle =           whiteheat_unthrottle,
195         .read_bulk_callback =   whiteheat_read_callback,
196         .write_bulk_callback =  whiteheat_write_callback,
197 };
198
199
200 struct whiteheat_command_private {
201         struct mutex            mutex;
202         __u8                    port_running;
203         __u8                    command_finished;
204         wait_queue_head_t       wait_command;   /* for handling sleeping while waiting for a command to finish */
205         __u8                    result_buffer[64];
206 };
207
208
209 #define THROTTLED               0x01
210 #define ACTUALLY_THROTTLED      0x02
211
212 static int urb_pool_size = 8;
213
214 struct whiteheat_urb_wrap {
215         struct list_head        list;
216         struct urb              *urb;
217 };
218
219 struct whiteheat_private {
220         spinlock_t              lock;
221         __u8                    flags;
222         __u8                    mcr;            /* FIXME: no locking on mcr */
223         struct list_head        rx_urbs_free;
224         struct list_head        rx_urbs_submitted;
225         struct list_head        rx_urb_q;
226         struct work_struct      rx_work;
227         struct usb_serial_port  *port;
228         struct list_head        tx_urbs_free;
229         struct list_head        tx_urbs_submitted;
230         struct mutex            deathwarrant;
231 };
232
233
234 /* local function prototypes */
235 static int start_command_port(struct usb_serial *serial);
236 static void stop_command_port(struct usb_serial *serial);
237 static void command_port_write_callback(struct urb *urb);
238 static void command_port_read_callback(struct urb *urb);
239
240 static int start_port_read(struct usb_serial_port *port);
241 static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, struct list_head *head);
242 static struct list_head *list_first(struct list_head *head);
243 static void rx_data_softint(struct work_struct *work);
244
245 static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize);
246 static int firm_open(struct usb_serial_port *port);
247 static int firm_close(struct usb_serial_port *port);
248 static int firm_setup_port(struct usb_serial_port *port);
249 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
250 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
251 static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
252 static int firm_purge(struct usb_serial_port *port, __u8 rxtx);
253 static int firm_get_dtr_rts(struct usb_serial_port *port);
254 static int firm_report_tx_done(struct usb_serial_port *port);
255
256
257 #define COMMAND_PORT            4
258 #define COMMAND_TIMEOUT         (2*HZ)  /* 2 second timeout for a command */
259 #define COMMAND_TIMEOUT_MS      2000
260 #define CLOSING_DELAY           (30 * HZ)
261
262
263 /*****************************************************************************
264  * Connect Tech's White Heat prerenumeration driver functions
265  *****************************************************************************/
266
267 /* steps to download the firmware to the WhiteHEAT device:
268  - hold the reset (by writing to the reset bit of the CPUCS register)
269  - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD
270  - release the reset (by writing to the CPUCS register)
271  - download the WH.HEX file for all addresses greater than 0x1b3f using
272    VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD
273  - hold the reset
274  - download the WH.HEX file for all addresses less than 0x1b40 using
275    VENDOR_REQUEST_ANCHOR_LOAD
276  - release the reset
277  - device renumerated itself and comes up as new device id with all
278    firmware download completed.
279 */
280 static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id)
281 {
282         int response;
283         const struct whiteheat_hex_record *record;
284         
285         dbg("%s", __func__);
286         
287         response = ezusb_set_reset (serial, 1);
288
289         record = &whiteheat_loader[0];
290         while (record->address != 0xffff) {
291                 response = ezusb_writememory (serial, record->address, 
292                                 (unsigned char *)record->data, record->data_size, 0xa0);
293                 if (response < 0) {
294                         err("%s - ezusb_writememory failed for loader (%d %04X %p %d)",
295                                 __func__, response, record->address, record->data, record->data_size);
296                         break;
297                 }
298                 ++record;
299         }
300
301         response = ezusb_set_reset (serial, 0);
302
303         record = &whiteheat_firmware[0];
304         while (record->address < 0x1b40) {
305                 ++record;
306         }
307         while (record->address != 0xffff) {
308                 response = ezusb_writememory (serial, record->address, 
309                                 (unsigned char *)record->data, record->data_size, 0xa3);
310                 if (response < 0) {
311                         err("%s - ezusb_writememory failed for first firmware step (%d %04X %p %d)", 
312                                 __func__, response, record->address, record->data, record->data_size);
313                         break;
314                 }
315                 ++record;
316         }
317         
318         response = ezusb_set_reset (serial, 1);
319
320         record = &whiteheat_firmware[0];
321         while (record->address < 0x1b40) {
322                 response = ezusb_writememory (serial, record->address, 
323                                 (unsigned char *)record->data, record->data_size, 0xa0);
324                 if (response < 0) {
325                         err("%s - ezusb_writememory failed for second firmware step (%d %04X %p %d)", 
326                                 __func__, response, record->address, record->data, record->data_size);
327                         break;
328                 }
329                 ++record;
330         }
331
332         response = ezusb_set_reset (serial, 0);
333
334         return 0;
335 }
336
337
338 static int whiteheat_firmware_attach (struct usb_serial *serial)
339 {
340         /* We want this device to fail to have a driver assigned to it */
341         return 1;
342 }
343
344
345 /*****************************************************************************
346  * Connect Tech's White Heat serial driver functions
347  *****************************************************************************/
348 static int whiteheat_attach (struct usb_serial *serial)
349 {
350         struct usb_serial_port *command_port;
351         struct whiteheat_command_private *command_info;
352         struct usb_serial_port *port;
353         struct whiteheat_private *info;
354         struct whiteheat_hw_info *hw_info;
355         int pipe;
356         int ret;
357         int alen;
358         __u8 *command;
359         __u8 *result;
360         int i;
361         int j;
362         struct urb *urb;
363         int buf_size;
364         struct whiteheat_urb_wrap *wrap;
365         struct list_head *tmp;
366
367         command_port = serial->port[COMMAND_PORT];
368
369         pipe = usb_sndbulkpipe (serial->dev, command_port->bulk_out_endpointAddress);
370         command = kmalloc(2, GFP_KERNEL);
371         if (!command)
372                 goto no_command_buffer;
373         command[0] = WHITEHEAT_GET_HW_INFO;
374         command[1] = 0;
375         
376         result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL);
377         if (!result)
378                 goto no_result_buffer;
379         /*
380          * When the module is reloaded the firmware is still there and
381          * the endpoints are still in the usb core unchanged. This is the
382          * unlinking bug in disguise. Same for the call below.
383          */
384         usb_clear_halt(serial->dev, pipe);
385         ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS);
386         if (ret) {
387                 err("%s: Couldn't send command [%d]", serial->type->description, ret);
388                 goto no_firmware;
389         } else if (alen != 2) {
390                 err("%s: Send command incomplete [%d]", serial->type->description, alen);
391                 goto no_firmware;
392         }
393
394         pipe = usb_rcvbulkpipe (serial->dev, command_port->bulk_in_endpointAddress);
395         /* See the comment on the usb_clear_halt() above */
396         usb_clear_halt(serial->dev, pipe);
397         ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
398         if (ret) {
399                 err("%s: Couldn't get results [%d]", serial->type->description, ret);
400                 goto no_firmware;
401         } else if (alen != sizeof(*hw_info) + 1) {
402                 err("%s: Get results incomplete [%d]", serial->type->description, alen);
403                 goto no_firmware;
404         } else if (result[0] != command[0]) {
405                 err("%s: Command failed [%d]", serial->type->description, result[0]);
406                 goto no_firmware;
407         }
408
409         hw_info = (struct whiteheat_hw_info *)&result[1];
410
411         info("%s: Driver %s: Firmware v%d.%02d", serial->type->description,
412              DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev);
413
414         for (i = 0; i < serial->num_ports; i++) {
415                 port = serial->port[i];
416
417                 info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
418                 if (info == NULL) {
419                         err("%s: Out of memory for port structures\n", serial->type->description);
420                         goto no_private;
421                 }
422
423                 spin_lock_init(&info->lock);
424                 mutex_init(&info->deathwarrant);
425                 info->flags = 0;
426                 info->mcr = 0;
427                 INIT_WORK(&info->rx_work, rx_data_softint);
428                 info->port = port;
429
430                 INIT_LIST_HEAD(&info->rx_urbs_free);
431                 INIT_LIST_HEAD(&info->rx_urbs_submitted);
432                 INIT_LIST_HEAD(&info->rx_urb_q);
433                 INIT_LIST_HEAD(&info->tx_urbs_free);
434                 INIT_LIST_HEAD(&info->tx_urbs_submitted);
435
436                 for (j = 0; j < urb_pool_size; j++) {
437                         urb = usb_alloc_urb(0, GFP_KERNEL);
438                         if (!urb) {
439                                 err("No free urbs available");
440                                 goto no_rx_urb;
441                         }
442                         buf_size = port->read_urb->transfer_buffer_length;
443                         urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
444                         if (!urb->transfer_buffer) {
445                                 err("Couldn't allocate urb buffer");
446                                 goto no_rx_buf;
447                         }
448                         wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
449                         if (!wrap) {
450                                 err("Couldn't allocate urb wrapper");
451                                 goto no_rx_wrap;
452                         }
453                         usb_fill_bulk_urb(urb, serial->dev,
454                                         usb_rcvbulkpipe(serial->dev,
455                                                 port->bulk_in_endpointAddress),
456                                         urb->transfer_buffer, buf_size,
457                                         whiteheat_read_callback, port);
458                         wrap->urb = urb;
459                         list_add(&wrap->list, &info->rx_urbs_free);
460
461                         urb = usb_alloc_urb(0, GFP_KERNEL);
462                         if (!urb) {
463                                 err("No free urbs available");
464                                 goto no_tx_urb;
465                         }
466                         buf_size = port->write_urb->transfer_buffer_length;
467                         urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
468                         if (!urb->transfer_buffer) {
469                                 err("Couldn't allocate urb buffer");
470                                 goto no_tx_buf;
471                         }
472                         wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
473                         if (!wrap) {
474                                 err("Couldn't allocate urb wrapper");
475                                 goto no_tx_wrap;
476                         }
477                         usb_fill_bulk_urb(urb, serial->dev,
478                                         usb_sndbulkpipe(serial->dev,
479                                                 port->bulk_out_endpointAddress),
480                                         urb->transfer_buffer, buf_size,
481                                         whiteheat_write_callback, port);
482                         wrap->urb = urb;
483                         list_add(&wrap->list, &info->tx_urbs_free);
484                 }
485
486                 usb_set_serial_port_data(port, info);
487         }
488
489         command_info = kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL);
490         if (command_info == NULL) {
491                 err("%s: Out of memory for port structures\n", serial->type->description);
492                 goto no_command_private;
493         }
494
495         mutex_init(&command_info->mutex);
496         command_info->port_running = 0;
497         init_waitqueue_head(&command_info->wait_command);
498         usb_set_serial_port_data(command_port, command_info);
499         command_port->write_urb->complete = command_port_write_callback;
500         command_port->read_urb->complete = command_port_read_callback;
501         kfree(result);
502         kfree(command);
503
504         return 0;
505
506 no_firmware:
507         /* Firmware likely not running */
508         err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description);
509         err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description);
510         err("%s: please contact support@connecttech.com\n", serial->type->description);
511         kfree(result);
512         return -ENODEV;
513
514 no_command_private:
515         for (i = serial->num_ports - 1; i >= 0; i--) {
516                 port = serial->port[i];
517                 info = usb_get_serial_port_data(port);
518                 for (j = urb_pool_size - 1; j >= 0; j--) {
519                         tmp = list_first(&info->tx_urbs_free);
520                         list_del(tmp);
521                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
522                         urb = wrap->urb;
523                         kfree(wrap);
524 no_tx_wrap:
525                         kfree(urb->transfer_buffer);
526 no_tx_buf:
527                         usb_free_urb(urb);
528 no_tx_urb:
529                         tmp = list_first(&info->rx_urbs_free);
530                         list_del(tmp);
531                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
532                         urb = wrap->urb;
533                         kfree(wrap);
534 no_rx_wrap:
535                         kfree(urb->transfer_buffer);
536 no_rx_buf:
537                         usb_free_urb(urb);
538 no_rx_urb:
539                         ;
540                 }
541                 kfree(info);
542 no_private:
543                 ;
544         }
545         kfree(result);
546 no_result_buffer:
547         kfree(command);
548 no_command_buffer:
549         return -ENOMEM;
550 }
551
552
553 static void whiteheat_shutdown (struct usb_serial *serial)
554 {
555         struct usb_serial_port *command_port;
556         struct usb_serial_port *port;
557         struct whiteheat_private *info;
558         struct whiteheat_urb_wrap *wrap;
559         struct urb *urb;
560         struct list_head *tmp;
561         struct list_head *tmp2;
562         int i;
563
564         dbg("%s", __func__);
565
566         /* free up our private data for our command port */
567         command_port = serial->port[COMMAND_PORT];
568         kfree (usb_get_serial_port_data(command_port));
569
570         for (i = 0; i < serial->num_ports; i++) {
571                 port = serial->port[i];
572                 info = usb_get_serial_port_data(port);
573                 list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) {
574                         list_del(tmp);
575                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
576                         urb = wrap->urb;
577                         kfree(wrap);
578                         kfree(urb->transfer_buffer);
579                         usb_free_urb(urb);
580                 }
581                 list_for_each_safe(tmp, tmp2, &info->tx_urbs_free) {
582                         list_del(tmp);
583                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
584                         urb = wrap->urb;
585                         kfree(wrap);
586                         kfree(urb->transfer_buffer);
587                         usb_free_urb(urb);
588                 }
589                 kfree(info);
590         }
591
592         return;
593 }
594
595
596 static int whiteheat_open (struct usb_serial_port *port, struct file *filp)
597 {
598         int             retval = 0;
599         struct ktermios old_term;
600
601         dbg("%s - port %d", __func__, port->number);
602
603         retval = start_command_port(port->serial);
604         if (retval)
605                 goto exit;
606
607         port->tty->low_latency = 1;
608
609         /* send an open port command */
610         retval = firm_open(port);
611         if (retval) {
612                 stop_command_port(port->serial);
613                 goto exit;
614         }
615
616         retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX);
617         if (retval) {
618                 firm_close(port);
619                 stop_command_port(port->serial);
620                 goto exit;
621         }
622
623         old_term.c_cflag = ~port->tty->termios->c_cflag;
624         old_term.c_iflag = ~port->tty->termios->c_iflag;
625         whiteheat_set_termios(port, &old_term);
626
627         /* Work around HCD bugs */
628         usb_clear_halt(port->serial->dev, port->read_urb->pipe);
629         usb_clear_halt(port->serial->dev, port->write_urb->pipe);
630
631         /* Start reading from the device */
632         retval = start_port_read(port);
633         if (retval) {
634                 err("%s - failed submitting read urb, error %d", __func__, retval);
635                 firm_close(port);
636                 stop_command_port(port->serial);
637                 goto exit;
638         }
639
640 exit:
641         dbg("%s - exit, retval = %d", __func__, retval);
642         return retval;
643 }
644
645
646 static void whiteheat_close(struct usb_serial_port *port, struct file * filp)
647 {
648         struct whiteheat_private *info = usb_get_serial_port_data(port);
649         struct whiteheat_urb_wrap *wrap;
650         struct urb *urb;
651         struct list_head *tmp;
652         struct list_head *tmp2;
653
654         dbg("%s - port %d", __func__, port->number);
655
656         mutex_lock(&port->serial->disc_mutex);
657         /* filp is NULL when called from usb_serial_disconnect */
658         if ((filp && (tty_hung_up_p(filp))) || port->serial->disconnected) {
659                 mutex_unlock(&port->serial->disc_mutex);
660                 return;
661         }
662         mutex_unlock(&port->serial->disc_mutex);
663
664         port->tty->closing = 1;
665
666 /*
667  * Not currently in use; tty_wait_until_sent() calls
668  * serial_chars_in_buffer() which deadlocks on the second semaphore
669  * acquisition. This should be fixed at some point. Greg's been
670  * notified.
671         if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) {
672                 tty_wait_until_sent(port->tty, CLOSING_DELAY);
673         }
674 */
675
676         if (port->tty->driver->flush_buffer)
677                 port->tty->driver->flush_buffer(port->tty);
678         tty_ldisc_flush(port->tty);
679
680         firm_report_tx_done(port);
681
682         firm_close(port);
683
684 printk(KERN_ERR"Before processing rx_urbs_submitted.\n");
685         /* shutdown our bulk reads and writes */
686         mutex_lock(&info->deathwarrant);
687         spin_lock_irq(&info->lock);
688         list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) {
689                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
690                 urb = wrap->urb;
691                 list_del(tmp);
692                 spin_unlock_irq(&info->lock);
693                 usb_kill_urb(urb);
694                 spin_lock_irq(&info->lock);
695                 list_add(tmp, &info->rx_urbs_free);
696         }
697         list_for_each_safe(tmp, tmp2, &info->rx_urb_q)
698                 list_move(tmp, &info->rx_urbs_free);
699         list_for_each_safe(tmp, tmp2, &info->tx_urbs_submitted) {
700                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
701                 urb = wrap->urb;
702                 list_del(tmp);
703                 spin_unlock_irq(&info->lock);
704                 usb_kill_urb(urb);
705                 spin_lock_irq(&info->lock);
706                 list_add(tmp, &info->tx_urbs_free);
707         }
708         spin_unlock_irq(&info->lock);
709         mutex_unlock(&info->deathwarrant);
710
711         stop_command_port(port->serial);
712
713         port->tty->closing = 0;
714 }
715
716
717 static int whiteheat_write(struct usb_serial_port *port, const unsigned char *buf, int count)
718 {
719         struct usb_serial *serial = port->serial;
720         struct whiteheat_private *info = usb_get_serial_port_data(port);
721         struct whiteheat_urb_wrap *wrap;
722         struct urb *urb;
723         int result;
724         int bytes;
725         int sent = 0;
726         unsigned long flags;
727         struct list_head *tmp;
728
729         dbg("%s - port %d", __func__, port->number);
730
731         if (count == 0) {
732                 dbg("%s - write request of 0 bytes", __func__);
733                 return (0);
734         }
735
736         while (count) {
737                 spin_lock_irqsave(&info->lock, flags);
738                 if (list_empty(&info->tx_urbs_free)) {
739                         spin_unlock_irqrestore(&info->lock, flags);
740                         break;
741                 }
742                 tmp = list_first(&info->tx_urbs_free);
743                 list_del(tmp);
744                 spin_unlock_irqrestore(&info->lock, flags);
745
746                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
747                 urb = wrap->urb;
748                 bytes = (count > port->bulk_out_size) ? port->bulk_out_size : count;
749                 memcpy (urb->transfer_buffer, buf + sent, bytes);
750
751                 usb_serial_debug_data(debug, &port->dev, __func__, bytes, urb->transfer_buffer);
752
753                 urb->dev = serial->dev;
754                 urb->transfer_buffer_length = bytes;
755                 result = usb_submit_urb(urb, GFP_ATOMIC);
756                 if (result) {
757                         err("%s - failed submitting write urb, error %d", __func__, result);
758                         sent = result;
759                         spin_lock_irqsave(&info->lock, flags);
760                         list_add(tmp, &info->tx_urbs_free);
761                         spin_unlock_irqrestore(&info->lock, flags);
762                         break;
763                 } else {
764                         sent += bytes;
765                         count -= bytes;
766                         spin_lock_irqsave(&info->lock, flags);
767                         list_add(tmp, &info->tx_urbs_submitted);
768                         spin_unlock_irqrestore(&info->lock, flags);
769                 }
770         }
771
772         return sent;
773 }
774
775
776 static int whiteheat_write_room(struct usb_serial_port *port)
777 {
778         struct whiteheat_private *info = usb_get_serial_port_data(port);
779         struct list_head *tmp;
780         int room = 0;
781         unsigned long flags;
782
783         dbg("%s - port %d", __func__, port->number);
784         
785         spin_lock_irqsave(&info->lock, flags);
786         list_for_each(tmp, &info->tx_urbs_free)
787                 room++;
788         spin_unlock_irqrestore(&info->lock, flags);
789         room *= port->bulk_out_size;
790
791         dbg("%s - returns %d", __func__, room);
792         return (room);
793 }
794
795
796 static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file)
797 {
798         struct whiteheat_private *info = usb_get_serial_port_data(port);
799         unsigned int modem_signals = 0;
800
801         dbg("%s - port %d", __func__, port->number);
802
803         firm_get_dtr_rts(port);
804         if (info->mcr & UART_MCR_DTR)
805                 modem_signals |= TIOCM_DTR;
806         if (info->mcr & UART_MCR_RTS)
807                 modem_signals |= TIOCM_RTS;
808
809         return modem_signals;
810 }
811
812
813 static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file,
814                                unsigned int set, unsigned int clear)
815 {
816         struct whiteheat_private *info = usb_get_serial_port_data(port);
817
818         dbg("%s - port %d", __func__, port->number);
819
820         if (set & TIOCM_RTS)
821                 info->mcr |= UART_MCR_RTS;
822         if (set & TIOCM_DTR)
823                 info->mcr |= UART_MCR_DTR;
824
825         if (clear & TIOCM_RTS)
826                 info->mcr &= ~UART_MCR_RTS;
827         if (clear & TIOCM_DTR)
828                 info->mcr &= ~UART_MCR_DTR;
829
830         firm_set_dtr(port, info->mcr & UART_MCR_DTR);
831         firm_set_rts(port, info->mcr & UART_MCR_RTS);
832         return 0;
833 }
834
835
836 static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
837 {
838         struct serial_struct serstruct;
839         void __user *user_arg = (void __user *)arg;
840
841         dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
842
843         switch (cmd) {
844                 case TIOCGSERIAL:
845                         memset(&serstruct, 0, sizeof(serstruct));
846                         serstruct.type = PORT_16654;
847                         serstruct.line = port->serial->minor;
848                         serstruct.port = port->number;
849                         serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
850                         serstruct.xmit_fifo_size = port->bulk_out_size;
851                         serstruct.custom_divisor = 0;
852                         serstruct.baud_base = 460800;
853                         serstruct.close_delay = CLOSING_DELAY;
854                         serstruct.closing_wait = CLOSING_DELAY;
855
856                         if (copy_to_user(user_arg, &serstruct, sizeof(serstruct)))
857                                 return -EFAULT;
858
859                         break;
860
861                 case TIOCSSERIAL:
862                         if (copy_from_user(&serstruct, user_arg, sizeof(serstruct)))
863                                 return -EFAULT;
864
865                         /*
866                          * For now this is ignored. dip sets the ASYNC_[V]HI flags
867                          * but this isn't used by us at all. Maybe someone somewhere
868                          * will need the custom_divisor setting.
869                          */
870
871                         break;
872
873                 default:
874                         break;
875         }
876
877         return -ENOIOCTLCMD;
878 }
879
880
881 static void whiteheat_set_termios(struct usb_serial_port *port, struct ktermios *old_termios)
882 {
883         dbg("%s -port %d", __func__, port->number);
884         firm_setup_port(port);
885 }
886
887
888 static void whiteheat_break_ctl(struct usb_serial_port *port, int break_state) {
889         firm_set_break(port, break_state);
890 }
891
892
893 static int whiteheat_chars_in_buffer(struct usb_serial_port *port)
894 {
895         struct whiteheat_private *info = usb_get_serial_port_data(port);
896         struct list_head *tmp;
897         struct whiteheat_urb_wrap *wrap;
898         int chars = 0;
899         unsigned long flags;
900
901         dbg("%s - port %d", __func__, port->number);
902
903         spin_lock_irqsave(&info->lock, flags);
904         list_for_each(tmp, &info->tx_urbs_submitted) {
905                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
906                 chars += wrap->urb->transfer_buffer_length;
907         }
908         spin_unlock_irqrestore(&info->lock, flags);
909
910         dbg ("%s - returns %d", __func__, chars);
911         return chars;
912 }
913
914
915 static void whiteheat_throttle (struct usb_serial_port *port)
916 {
917         struct whiteheat_private *info = usb_get_serial_port_data(port);
918         unsigned long flags;
919
920         dbg("%s - port %d", __func__, port->number);
921
922         spin_lock_irqsave(&info->lock, flags);
923         info->flags |= THROTTLED;
924         spin_unlock_irqrestore(&info->lock, flags);
925
926         return;
927 }
928
929
930 static void whiteheat_unthrottle (struct usb_serial_port *port)
931 {
932         struct whiteheat_private *info = usb_get_serial_port_data(port);
933         int actually_throttled;
934         unsigned long flags;
935
936         dbg("%s - port %d", __func__, port->number);
937
938         spin_lock_irqsave(&info->lock, flags);
939         actually_throttled = info->flags & ACTUALLY_THROTTLED;
940         info->flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
941         spin_unlock_irqrestore(&info->lock, flags);
942
943         if (actually_throttled)
944                 rx_data_softint(&info->rx_work);
945
946         return;
947 }
948
949
950 /*****************************************************************************
951  * Connect Tech's White Heat callback routines
952  *****************************************************************************/
953 static void command_port_write_callback(struct urb *urb)
954 {
955         int status = urb->status;
956
957         dbg("%s", __func__);
958
959         if (status) {
960                 dbg("nonzero urb status: %d", status);
961                 return;
962         }
963 }
964
965
966 static void command_port_read_callback(struct urb *urb)
967 {
968         struct usb_serial_port *command_port = urb->context;
969         struct whiteheat_command_private *command_info;
970         int status = urb->status;
971         unsigned char *data = urb->transfer_buffer;
972         int result;
973
974         dbg("%s", __func__);
975
976         command_info = usb_get_serial_port_data(command_port);
977         if (!command_info) {
978                 dbg ("%s - command_info is NULL, exiting.", __func__);
979                 return;
980         }
981         if (status) {
982                 dbg("%s - nonzero urb status: %d", __func__, status);
983                 if (status != -ENOENT)
984                         command_info->command_finished = WHITEHEAT_CMD_FAILURE;
985                 wake_up(&command_info->wait_command);
986                 return;
987         }
988
989         usb_serial_debug_data(debug, &command_port->dev, __func__, urb->actual_length, data);
990
991         if (data[0] == WHITEHEAT_CMD_COMPLETE) {
992                 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
993                 wake_up(&command_info->wait_command);
994         } else if (data[0] == WHITEHEAT_CMD_FAILURE) {
995                 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
996                 wake_up(&command_info->wait_command);
997         } else if (data[0] == WHITEHEAT_EVENT) {
998                 /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */
999                 dbg("%s - event received", __func__);
1000         } else if (data[0] == WHITEHEAT_GET_DTR_RTS) {
1001                 memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1);
1002                 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
1003                 wake_up(&command_info->wait_command);
1004         } else {
1005                 dbg("%s - bad reply from firmware", __func__);
1006         }
1007         
1008         /* Continue trying to always read */
1009         command_port->read_urb->dev = command_port->serial->dev;
1010         result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
1011         if (result)
1012                 dbg("%s - failed resubmitting read urb, error %d", __func__, result);
1013 }
1014
1015
1016 static void whiteheat_read_callback(struct urb *urb)
1017 {
1018         struct usb_serial_port *port = urb->context;
1019         struct whiteheat_urb_wrap *wrap;
1020         unsigned char *data = urb->transfer_buffer;
1021         struct whiteheat_private *info = usb_get_serial_port_data(port);
1022         int status = urb->status;
1023
1024         dbg("%s - port %d", __func__, port->number);
1025
1026         spin_lock(&info->lock);
1027         wrap = urb_to_wrap(urb, &info->rx_urbs_submitted);
1028         if (!wrap) {
1029                 spin_unlock(&info->lock);
1030                 err("%s - Not my urb!", __func__);
1031                 return;
1032         }
1033         list_del(&wrap->list);
1034         spin_unlock(&info->lock);
1035
1036         if (status) {
1037                 dbg("%s - nonzero read bulk status received: %d",
1038                     __func__, status);
1039                 spin_lock(&info->lock);
1040                 list_add(&wrap->list, &info->rx_urbs_free);
1041                 spin_unlock(&info->lock);
1042                 return;
1043         }
1044
1045         usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
1046
1047         spin_lock(&info->lock);
1048         list_add_tail(&wrap->list, &info->rx_urb_q);
1049         if (info->flags & THROTTLED) {
1050                 info->flags |= ACTUALLY_THROTTLED;
1051                 spin_unlock(&info->lock);
1052                 return;
1053         }
1054         spin_unlock(&info->lock);
1055
1056         schedule_work(&info->rx_work);
1057 }
1058
1059
1060 static void whiteheat_write_callback(struct urb *urb)
1061 {
1062         struct usb_serial_port *port = urb->context;
1063         struct whiteheat_private *info = usb_get_serial_port_data(port);
1064         struct whiteheat_urb_wrap *wrap;
1065         int status = urb->status;
1066
1067         dbg("%s - port %d", __func__, port->number);
1068
1069         spin_lock(&info->lock);
1070         wrap = urb_to_wrap(urb, &info->tx_urbs_submitted);
1071         if (!wrap) {
1072                 spin_unlock(&info->lock);
1073                 err("%s - Not my urb!", __func__);
1074                 return;
1075         }
1076         list_move(&wrap->list, &info->tx_urbs_free);
1077         spin_unlock(&info->lock);
1078
1079         if (status) {
1080                 dbg("%s - nonzero write bulk status received: %d",
1081                     __func__, status);
1082                 return;
1083         }
1084
1085         usb_serial_port_softint(port);
1086 }
1087
1088
1089 /*****************************************************************************
1090  * Connect Tech's White Heat firmware interface
1091  *****************************************************************************/
1092 static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize)
1093 {
1094         struct usb_serial_port *command_port;
1095         struct whiteheat_command_private *command_info;
1096         struct whiteheat_private *info;
1097         __u8 *transfer_buffer;
1098         int retval = 0;
1099         int t;
1100
1101         dbg("%s - command %d", __func__, command);
1102
1103         command_port = port->serial->port[COMMAND_PORT];
1104         command_info = usb_get_serial_port_data(command_port);
1105         mutex_lock(&command_info->mutex);
1106         command_info->command_finished = false;
1107         
1108         transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer;
1109         transfer_buffer[0] = command;
1110         memcpy (&transfer_buffer[1], data, datasize);
1111         command_port->write_urb->transfer_buffer_length = datasize + 1;
1112         command_port->write_urb->dev = port->serial->dev;
1113         retval = usb_submit_urb (command_port->write_urb, GFP_NOIO);
1114         if (retval) {
1115                 dbg("%s - submit urb failed", __func__);
1116                 goto exit;
1117         }
1118
1119         /* wait for the command to complete */
1120         t = wait_event_timeout(command_info->wait_command,
1121                 (bool)command_info->command_finished, COMMAND_TIMEOUT);
1122         if (!t)
1123                 usb_kill_urb(command_port->write_urb);
1124
1125         if (command_info->command_finished == false) {
1126                 dbg("%s - command timed out.", __func__);
1127                 retval = -ETIMEDOUT;
1128                 goto exit;
1129         }
1130
1131         if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) {
1132                 dbg("%s - command failed.", __func__);
1133                 retval = -EIO;
1134                 goto exit;
1135         }
1136
1137         if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) {
1138                 dbg("%s - command completed.", __func__);
1139                 switch (command) {
1140                         case WHITEHEAT_GET_DTR_RTS:
1141                                 info = usb_get_serial_port_data(port);
1142                                 memcpy(&info->mcr, command_info->result_buffer, sizeof(struct whiteheat_dr_info));
1143                                 break;
1144                 }
1145         }
1146
1147 exit:
1148         mutex_unlock(&command_info->mutex);
1149         return retval;
1150 }
1151
1152
1153 static int firm_open(struct usb_serial_port *port) {
1154         struct whiteheat_simple open_command;
1155
1156         open_command.port = port->number - port->serial->minor + 1;
1157         return firm_send_command(port, WHITEHEAT_OPEN, (__u8 *)&open_command, sizeof(open_command));
1158 }
1159
1160
1161 static int firm_close(struct usb_serial_port *port) {
1162         struct whiteheat_simple close_command;
1163
1164         close_command.port = port->number - port->serial->minor + 1;
1165         return firm_send_command(port, WHITEHEAT_CLOSE, (__u8 *)&close_command, sizeof(close_command));
1166 }
1167
1168
1169 static int firm_setup_port(struct usb_serial_port *port) {
1170         struct whiteheat_port_settings port_settings;
1171         unsigned int cflag = port->tty->termios->c_cflag;
1172
1173         port_settings.port = port->number + 1;
1174
1175         /* get the byte size */
1176         switch (cflag & CSIZE) {
1177                 case CS5:       port_settings.bits = 5;   break;
1178                 case CS6:       port_settings.bits = 6;   break;
1179                 case CS7:       port_settings.bits = 7;   break;
1180                 default:
1181                 case CS8:       port_settings.bits = 8;   break;
1182         }
1183         dbg("%s - data bits = %d", __func__, port_settings.bits);
1184         
1185         /* determine the parity */
1186         if (cflag & PARENB)
1187                 if (cflag & CMSPAR)
1188                         if (cflag & PARODD)
1189                                 port_settings.parity = WHITEHEAT_PAR_MARK;
1190                         else
1191                                 port_settings.parity = WHITEHEAT_PAR_SPACE;
1192                 else
1193                         if (cflag & PARODD)
1194                                 port_settings.parity = WHITEHEAT_PAR_ODD;
1195                         else
1196                                 port_settings.parity = WHITEHEAT_PAR_EVEN;
1197         else
1198                 port_settings.parity = WHITEHEAT_PAR_NONE;
1199         dbg("%s - parity = %c", __func__, port_settings.parity);
1200
1201         /* figure out the stop bits requested */
1202         if (cflag & CSTOPB)
1203                 port_settings.stop = 2;
1204         else
1205                 port_settings.stop = 1;
1206         dbg("%s - stop bits = %d", __func__, port_settings.stop);
1207
1208         /* figure out the flow control settings */
1209         if (cflag & CRTSCTS)
1210                 port_settings.hflow = (WHITEHEAT_HFLOW_CTS | WHITEHEAT_HFLOW_RTS);
1211         else
1212                 port_settings.hflow = WHITEHEAT_HFLOW_NONE;
1213         dbg("%s - hardware flow control = %s %s %s %s", __func__,
1214             (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "",
1215             (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "",
1216             (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "",
1217             (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : "");
1218         
1219         /* determine software flow control */
1220         if (I_IXOFF(port->tty))
1221                 port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
1222         else
1223                 port_settings.sflow = WHITEHEAT_SFLOW_NONE;
1224         dbg("%s - software flow control = %c", __func__, port_settings.sflow);
1225         
1226         port_settings.xon = START_CHAR(port->tty);
1227         port_settings.xoff = STOP_CHAR(port->tty);
1228         dbg("%s - XON = %2x, XOFF = %2x", __func__, port_settings.xon, port_settings.xoff);
1229
1230         /* get the baud rate wanted */
1231         port_settings.baud = tty_get_baud_rate(port->tty);
1232         dbg("%s - baud rate = %d", __func__, port_settings.baud);
1233
1234         /* fixme: should set validated settings */
1235         tty_encode_baud_rate(port->tty, port_settings.baud, port_settings.baud);
1236         /* handle any settings that aren't specified in the tty structure */
1237         port_settings.lloop = 0;
1238         
1239         /* now send the message to the device */
1240         return firm_send_command(port, WHITEHEAT_SETUP_PORT, (__u8 *)&port_settings, sizeof(port_settings));
1241 }
1242
1243
1244 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) {
1245         struct whiteheat_set_rdb rts_command;
1246
1247         rts_command.port = port->number - port->serial->minor + 1;
1248         rts_command.state = onoff;
1249         return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&rts_command, sizeof(rts_command));
1250 }
1251
1252
1253 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) {
1254         struct whiteheat_set_rdb dtr_command;
1255
1256         dtr_command.port = port->number - port->serial->minor + 1;
1257         dtr_command.state = onoff;
1258         return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&dtr_command, sizeof(dtr_command));
1259 }
1260
1261
1262 static int firm_set_break(struct usb_serial_port *port, __u8 onoff) {
1263         struct whiteheat_set_rdb break_command;
1264
1265         break_command.port = port->number - port->serial->minor + 1;
1266         break_command.state = onoff;
1267         return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&break_command, sizeof(break_command));
1268 }
1269
1270
1271 static int firm_purge(struct usb_serial_port *port, __u8 rxtx) {
1272         struct whiteheat_purge purge_command;
1273
1274         purge_command.port = port->number - port->serial->minor + 1;
1275         purge_command.what = rxtx;
1276         return firm_send_command(port, WHITEHEAT_PURGE, (__u8 *)&purge_command, sizeof(purge_command));
1277 }
1278
1279
1280 static int firm_get_dtr_rts(struct usb_serial_port *port) {
1281         struct whiteheat_simple get_dr_command;
1282
1283         get_dr_command.port = port->number - port->serial->minor + 1;
1284         return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, (__u8 *)&get_dr_command, sizeof(get_dr_command));
1285 }
1286
1287
1288 static int firm_report_tx_done(struct usb_serial_port *port) {
1289         struct whiteheat_simple close_command;
1290
1291         close_command.port = port->number - port->serial->minor + 1;
1292         return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, (__u8 *)&close_command, sizeof(close_command));
1293 }
1294
1295
1296 /*****************************************************************************
1297  * Connect Tech's White Heat utility functions
1298  *****************************************************************************/
1299 static int start_command_port(struct usb_serial *serial)
1300 {
1301         struct usb_serial_port *command_port;
1302         struct whiteheat_command_private *command_info;
1303         int retval = 0;
1304         
1305         command_port = serial->port[COMMAND_PORT];
1306         command_info = usb_get_serial_port_data(command_port);
1307         mutex_lock(&command_info->mutex);
1308         if (!command_info->port_running) {
1309                 /* Work around HCD bugs */
1310                 usb_clear_halt(serial->dev, command_port->read_urb->pipe);
1311
1312                 command_port->read_urb->dev = serial->dev;
1313                 retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
1314                 if (retval) {
1315                         err("%s - failed submitting read urb, error %d", __func__, retval);
1316                         goto exit;
1317                 }
1318         }
1319         command_info->port_running++;
1320
1321 exit:
1322         mutex_unlock(&command_info->mutex);
1323         return retval;
1324 }
1325
1326
1327 static void stop_command_port(struct usb_serial *serial)
1328 {
1329         struct usb_serial_port *command_port;
1330         struct whiteheat_command_private *command_info;
1331
1332         command_port = serial->port[COMMAND_PORT];
1333         command_info = usb_get_serial_port_data(command_port);
1334         mutex_lock(&command_info->mutex);
1335         command_info->port_running--;
1336         if (!command_info->port_running)
1337                 usb_kill_urb(command_port->read_urb);
1338         mutex_unlock(&command_info->mutex);
1339 }
1340
1341
1342 static int start_port_read(struct usb_serial_port *port)
1343 {
1344         struct whiteheat_private *info = usb_get_serial_port_data(port);
1345         struct whiteheat_urb_wrap *wrap;
1346         struct urb *urb;
1347         int retval = 0;
1348         unsigned long flags;
1349         struct list_head *tmp;
1350         struct list_head *tmp2;
1351
1352         spin_lock_irqsave(&info->lock, flags);
1353
1354         list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) {
1355                 list_del(tmp);
1356                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1357                 urb = wrap->urb;
1358                 urb->dev = port->serial->dev;
1359                 spin_unlock_irqrestore(&info->lock, flags);
1360                 retval = usb_submit_urb(urb, GFP_KERNEL);
1361                 if (retval) {
1362                         spin_lock_irqsave(&info->lock, flags);
1363                         list_add(tmp, &info->rx_urbs_free);
1364                         list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) {
1365                                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1366                                 urb = wrap->urb;
1367                                 list_del(tmp);
1368                                 spin_unlock_irqrestore(&info->lock, flags);
1369                                 usb_kill_urb(urb);
1370                                 spin_lock_irqsave(&info->lock, flags);
1371                                 list_add(tmp, &info->rx_urbs_free);
1372                         }
1373                         break;
1374                 }
1375                 spin_lock_irqsave(&info->lock, flags);
1376                 list_add(tmp, &info->rx_urbs_submitted);
1377         }
1378
1379         spin_unlock_irqrestore(&info->lock, flags);
1380
1381         return retval;
1382 }
1383
1384
1385 static struct whiteheat_urb_wrap *urb_to_wrap(struct urb* urb, struct list_head *head)
1386 {
1387         struct whiteheat_urb_wrap *wrap;
1388         struct list_head *tmp;
1389
1390         list_for_each(tmp, head) {
1391                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1392                 if (wrap->urb == urb)
1393                         return wrap;
1394         }
1395
1396         return NULL;
1397 }
1398
1399
1400 static struct list_head *list_first(struct list_head *head)
1401 {
1402         return head->next;
1403 }
1404
1405
1406 static void rx_data_softint(struct work_struct *work)
1407 {
1408         struct whiteheat_private *info =
1409                 container_of(work, struct whiteheat_private, rx_work);
1410         struct usb_serial_port *port = info->port;
1411         struct tty_struct *tty = port->tty;
1412         struct whiteheat_urb_wrap *wrap;
1413         struct urb *urb;
1414         unsigned long flags;
1415         struct list_head *tmp;
1416         struct list_head *tmp2;
1417         int result;
1418         int sent = 0;
1419
1420         spin_lock_irqsave(&info->lock, flags);
1421         if (info->flags & THROTTLED) {
1422                 spin_unlock_irqrestore(&info->lock, flags);
1423                 return;
1424         }
1425
1426         list_for_each_safe(tmp, tmp2, &info->rx_urb_q) {
1427                 list_del(tmp);
1428                 spin_unlock_irqrestore(&info->lock, flags);
1429
1430                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1431                 urb = wrap->urb;
1432
1433                 if (tty && urb->actual_length) {
1434                         int len = tty_buffer_request_room(tty, urb->actual_length);
1435                         /* This stuff can go away now I suspect */
1436                         if (unlikely(len < urb->actual_length)) {
1437                                 spin_lock_irqsave(&info->lock, flags);
1438                                 list_add(tmp, &info->rx_urb_q);
1439                                 spin_unlock_irqrestore(&info->lock, flags);
1440                                 tty_flip_buffer_push(tty);
1441                                 schedule_work(&info->rx_work);
1442                                 return;
1443                         }
1444                         tty_insert_flip_string(tty, urb->transfer_buffer, len);
1445                         sent += len;
1446                 }
1447
1448                 urb->dev = port->serial->dev;
1449                 result = usb_submit_urb(urb, GFP_ATOMIC);
1450                 if (result) {
1451                         err("%s - failed resubmitting read urb, error %d", __func__, result);
1452                         spin_lock_irqsave(&info->lock, flags);
1453                         list_add(tmp, &info->rx_urbs_free);
1454                         continue;
1455                 }
1456
1457                 spin_lock_irqsave(&info->lock, flags);
1458                 list_add(tmp, &info->rx_urbs_submitted);
1459         }
1460         spin_unlock_irqrestore(&info->lock, flags);
1461
1462         if (sent)
1463                 tty_flip_buffer_push(tty);
1464 }
1465
1466
1467 /*****************************************************************************
1468  * Connect Tech's White Heat module functions
1469  *****************************************************************************/
1470 static int __init whiteheat_init (void)
1471 {
1472         int retval;
1473         retval = usb_serial_register(&whiteheat_fake_device);
1474         if (retval)
1475                 goto failed_fake_register;
1476         retval = usb_serial_register(&whiteheat_device);
1477         if (retval)
1478                 goto failed_device_register;
1479         retval = usb_register(&whiteheat_driver);
1480         if (retval)
1481                 goto failed_usb_register;
1482         info(DRIVER_DESC " " DRIVER_VERSION);
1483         return 0;
1484 failed_usb_register:
1485         usb_serial_deregister(&whiteheat_device);
1486 failed_device_register:
1487         usb_serial_deregister(&whiteheat_fake_device);
1488 failed_fake_register:
1489         return retval;
1490 }
1491
1492
1493 static void __exit whiteheat_exit (void)
1494 {
1495         usb_deregister (&whiteheat_driver);
1496         usb_serial_deregister (&whiteheat_fake_device);
1497         usb_serial_deregister (&whiteheat_device);
1498 }
1499
1500
1501 module_init(whiteheat_init);
1502 module_exit(whiteheat_exit);
1503
1504 MODULE_AUTHOR( DRIVER_AUTHOR );
1505 MODULE_DESCRIPTION( DRIVER_DESC );
1506 MODULE_LICENSE("GPL");
1507
1508 module_param(urb_pool_size, int, 0);
1509 MODULE_PARM_DESC(urb_pool_size, "Number of urbs to use for buffering");
1510
1511 module_param(debug, bool, S_IRUGO | S_IWUSR);
1512 MODULE_PARM_DESC(debug, "Debug enabled or not");