ARM: OMAP: switch to standard gpio get/set calls
[linux-2.6] / arch / arm / mach-omap1 / board-perseus2.c
1 /*
2  * linux/arch/arm/mach-omap1/board-perseus2.c
3  *
4  * Modified from board-generic.c
5  *
6  * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
7  * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2 as
11  * published by the Free Software Foundation.
12  */
13
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/platform_device.h>
17 #include <linux/delay.h>
18 #include <linux/mtd/mtd.h>
19 #include <linux/mtd/nand.h>
20 #include <linux/mtd/partitions.h>
21 #include <linux/input.h>
22
23 #include <mach/hardware.h>
24 #include <asm/mach-types.h>
25 #include <asm/mach/arch.h>
26 #include <asm/mach/flash.h>
27 #include <asm/mach/map.h>
28
29 #include <mach/tc.h>
30 #include <mach/gpio.h>
31 #include <mach/mux.h>
32 #include <mach/fpga.h>
33 #include <mach/nand.h>
34 #include <mach/keypad.h>
35 #include <mach/common.h>
36 #include <mach/board.h>
37
38 static int p2_keymap[] = {
39         KEY(0,0,KEY_UP),
40         KEY(0,1,KEY_RIGHT),
41         KEY(0,2,KEY_LEFT),
42         KEY(0,3,KEY_DOWN),
43         KEY(0,4,KEY_ENTER),
44         KEY(1,0,KEY_F10),
45         KEY(1,1,KEY_SEND),
46         KEY(1,2,KEY_END),
47         KEY(1,3,KEY_VOLUMEDOWN),
48         KEY(1,4,KEY_VOLUMEUP),
49         KEY(1,5,KEY_RECORD),
50         KEY(2,0,KEY_F9),
51         KEY(2,1,KEY_3),
52         KEY(2,2,KEY_6),
53         KEY(2,3,KEY_9),
54         KEY(2,4,KEY_KPDOT),
55         KEY(3,0,KEY_BACK),
56         KEY(3,1,KEY_2),
57         KEY(3,2,KEY_5),
58         KEY(3,3,KEY_8),
59         KEY(3,4,KEY_0),
60         KEY(3,5,KEY_KPSLASH),
61         KEY(4,0,KEY_HOME),
62         KEY(4,1,KEY_1),
63         KEY(4,2,KEY_4),
64         KEY(4,3,KEY_7),
65         KEY(4,4,KEY_KPASTERISK),
66         KEY(4,5,KEY_POWER),
67         0
68 };
69
70 static struct resource smc91x_resources[] = {
71         [0] = {
72                 .start  = H2P2_DBG_FPGA_ETHR_START,     /* Physical */
73                 .end    = H2P2_DBG_FPGA_ETHR_START + 0xf,
74                 .flags  = IORESOURCE_MEM,
75         },
76         [1] = {
77                 .start  = INT_730_MPU_EXT_NIRQ,
78                 .end    = 0,
79                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
80         },
81 };
82
83 static struct mtd_partition nor_partitions[] = {
84         /* bootloader (U-Boot, etc) in first sector */
85         {
86               .name             = "bootloader",
87               .offset           = 0,
88               .size             = SZ_128K,
89               .mask_flags       = MTD_WRITEABLE, /* force read-only */
90         },
91         /* bootloader params in the next sector */
92         {
93               .name             = "params",
94               .offset           = MTDPART_OFS_APPEND,
95               .size             = SZ_128K,
96               .mask_flags       = 0,
97         },
98         /* kernel */
99         {
100               .name             = "kernel",
101               .offset           = MTDPART_OFS_APPEND,
102               .size             = SZ_2M,
103               .mask_flags       = 0
104         },
105         /* rest of flash is a file system */
106         {
107               .name             = "rootfs",
108               .offset           = MTDPART_OFS_APPEND,
109               .size             = MTDPART_SIZ_FULL,
110               .mask_flags       = 0
111         },
112 };
113
114 static struct flash_platform_data nor_data = {
115         .map_name       = "cfi_probe",
116         .width          = 2,
117         .parts          = nor_partitions,
118         .nr_parts       = ARRAY_SIZE(nor_partitions),
119 };
120
121 static struct resource nor_resource = {
122         .start          = OMAP_CS0_PHYS,
123         .end            = OMAP_CS0_PHYS + SZ_32M - 1,
124         .flags          = IORESOURCE_MEM,
125 };
126
127 static struct platform_device nor_device = {
128         .name           = "omapflash",
129         .id             = 0,
130         .dev            = {
131                 .platform_data  = &nor_data,
132         },
133         .num_resources  = 1,
134         .resource       = &nor_resource,
135 };
136
137 static struct omap_nand_platform_data nand_data = {
138         .options        = NAND_SAMSUNG_LP_OPTIONS,
139 };
140
141 static struct resource nand_resource = {
142         .start          = OMAP_CS3_PHYS,
143         .end            = OMAP_CS3_PHYS + SZ_4K - 1,
144         .flags          = IORESOURCE_MEM,
145 };
146
147 static struct platform_device nand_device = {
148         .name           = "omapnand",
149         .id             = 0,
150         .dev            = {
151                 .platform_data  = &nand_data,
152         },
153         .num_resources  = 1,
154         .resource       = &nand_resource,
155 };
156
157 static struct platform_device smc91x_device = {
158         .name           = "smc91x",
159         .id             = 0,
160         .num_resources  = ARRAY_SIZE(smc91x_resources),
161         .resource       = smc91x_resources,
162 };
163
164 static struct resource kp_resources[] = {
165         [0] = {
166                 .start  = INT_730_MPUIO_KEYPAD,
167                 .end    = INT_730_MPUIO_KEYPAD,
168                 .flags  = IORESOURCE_IRQ,
169         },
170 };
171
172 static struct omap_kp_platform_data kp_data = {
173         .rows           = 8,
174         .cols           = 8,
175         .keymap         = p2_keymap,
176         .keymapsize     = ARRAY_SIZE(p2_keymap),
177         .delay          = 4,
178         .dbounce        = 1,
179 };
180
181 static struct platform_device kp_device = {
182         .name           = "omap-keypad",
183         .id             = -1,
184         .dev            = {
185                 .platform_data = &kp_data,
186         },
187         .num_resources  = ARRAY_SIZE(kp_resources),
188         .resource       = kp_resources,
189 };
190
191 static struct platform_device lcd_device = {
192         .name           = "lcd_p2",
193         .id             = -1,
194 };
195
196 static struct platform_device *devices[] __initdata = {
197         &nor_device,
198         &nand_device,
199         &smc91x_device,
200         &kp_device,
201         &lcd_device,
202 };
203
204 #define P2_NAND_RB_GPIO_PIN     62
205
206 static int nand_dev_ready(struct omap_nand_platform_data *data)
207 {
208         return gpio_get_value(P2_NAND_RB_GPIO_PIN);
209 }
210
211 static struct omap_uart_config perseus2_uart_config __initdata = {
212         .enabled_uarts = ((1 << 0) | (1 << 1)),
213 };
214
215 static struct omap_lcd_config perseus2_lcd_config __initdata = {
216         .ctrl_name      = "internal",
217 };
218
219 static struct omap_board_config_kernel perseus2_config[] __initdata = {
220         { OMAP_TAG_UART,        &perseus2_uart_config },
221         { OMAP_TAG_LCD,         &perseus2_lcd_config },
222 };
223
224 static void __init omap_perseus2_init(void)
225 {
226         if (!(omap_request_gpio(P2_NAND_RB_GPIO_PIN)))
227                 nand_data.dev_ready = nand_dev_ready;
228
229         omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
230         omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
231
232         platform_add_devices(devices, ARRAY_SIZE(devices));
233
234         omap_board_config = perseus2_config;
235         omap_board_config_size = ARRAY_SIZE(perseus2_config);
236         omap_serial_init();
237         omap_register_i2c_bus(1, 100, NULL, 0);
238 }
239
240 static void __init perseus2_init_smc91x(void)
241 {
242         fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
243         mdelay(50);
244         fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
245                    H2P2_DBG_FPGA_LAN_RESET);
246         mdelay(50);
247 }
248
249 static void __init omap_perseus2_init_irq(void)
250 {
251         omap1_init_common_hw();
252         omap_init_irq();
253         omap_gpio_init();
254         perseus2_init_smc91x();
255 }
256 /* Only FPGA needs to be mapped here. All others are done with ioremap */
257 static struct map_desc omap_perseus2_io_desc[] __initdata = {
258         {
259                 .virtual        = H2P2_DBG_FPGA_BASE,
260                 .pfn            = __phys_to_pfn(H2P2_DBG_FPGA_START),
261                 .length         = H2P2_DBG_FPGA_SIZE,
262                 .type           = MT_DEVICE
263         }
264 };
265
266 static void __init omap_perseus2_map_io(void)
267 {
268         omap1_map_common_io();
269         iotable_init(omap_perseus2_io_desc,
270                      ARRAY_SIZE(omap_perseus2_io_desc));
271
272         /* Early, board-dependent init */
273
274         /*
275          * Hold GSM Reset until needed
276          */
277         omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
278
279         /*
280          * UARTs -> done automagically by 8250 driver
281          */
282
283         /*
284          * CSx timings, GPIO Mux ... setup
285          */
286
287         /* Flash: CS0 timings setup */
288         omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
289         omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
290
291         /*
292          * Ethernet support through the debug board
293          * CS1 timings setup
294          */
295         omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
296         omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
297
298         /*
299          * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
300          * It is used as the Ethernet controller interrupt
301          */
302         omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
303 }
304
305 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
306         /* Maintainer: Kevin Hilman <kjh@hilman.org> */
307         .phys_io        = 0xfff00000,
308         .io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
309         .boot_params    = 0x10000100,
310         .map_io         = omap_perseus2_map_io,
311         .init_irq       = omap_perseus2_init_irq,
312         .init_machine   = omap_perseus2_init,
313         .timer          = &omap_timer,
314 MACHINE_END