2 * linux/arch/arm/mach-omap1/board-innovator.c
4 * Board specific inits for OMAP-1510 and OMAP-1610 Innovator
6 * Copyright (C) 2001 RidgeRun, Inc.
7 * Author: Greg Lonnon <glonnon@ridgerun.com>
9 * Copyright (C) 2002 MontaVista Software, Inc.
11 * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
12 * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License version 2 as
16 * published by the Free Software Foundation.
19 #include <linux/kernel.h>
20 #include <linux/init.h>
21 #include <linux/platform_device.h>
22 #include <linux/delay.h>
23 #include <linux/mtd/mtd.h>
24 #include <linux/mtd/partitions.h>
25 #include <linux/input.h>
27 #include <asm/hardware.h>
28 #include <asm/mach-types.h>
29 #include <asm/mach/arch.h>
30 #include <asm/mach/flash.h>
31 #include <asm/mach/map.h>
33 #include <asm/arch/mux.h>
34 #include <asm/arch/fpga.h>
35 #include <asm/arch/gpio.h>
36 #include <asm/arch/tc.h>
37 #include <asm/arch/usb.h>
38 #include <asm/arch/keypad.h>
39 #include <asm/arch/common.h>
40 #include <asm/arch/mcbsp.h>
41 #include <asm/arch/omap-alsa.h>
43 static int innovator_keymap[] = {
56 static struct mtd_partition innovator_partitions[] = {
57 /* bootloader (U-Boot, etc) in first sector */
62 .mask_flags = MTD_WRITEABLE, /* force read-only */
64 /* bootloader params in the next sector */
67 .offset = MTDPART_OFS_APPEND,
74 .offset = MTDPART_OFS_APPEND,
78 /* rest of flash1 is a file system */
81 .offset = MTDPART_OFS_APPEND,
82 .size = SZ_16M - SZ_2M - 2 * SZ_128K,
88 .offset = MTDPART_OFS_APPEND,
89 .size = MTDPART_SIZ_FULL,
94 static struct flash_platform_data innovator_flash_data = {
95 .map_name = "cfi_probe",
97 .parts = innovator_partitions,
98 .nr_parts = ARRAY_SIZE(innovator_partitions),
101 static struct resource innovator_flash_resource = {
102 .start = OMAP_CS0_PHYS,
103 .end = OMAP_CS0_PHYS + SZ_32M - 1,
104 .flags = IORESOURCE_MEM,
107 static struct platform_device innovator_flash_device = {
111 .platform_data = &innovator_flash_data,
114 .resource = &innovator_flash_resource,
117 #define DEFAULT_BITPERSAMPLE 16
119 static struct omap_mcbsp_reg_cfg mcbsp_regs = {
120 .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
121 .spcr1 = RINTM(3) | RRST,
122 .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
123 RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
124 .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
125 .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
126 XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
127 .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
128 .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
129 .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
130 /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
131 .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
134 static struct omap_alsa_codec_config alsa_config = {
135 .name = "OMAP Innovator AIC23",
136 .mcbsp_regs_alsa = &mcbsp_regs,
137 .codec_configure_dev = NULL, /* aic23_configure, */
138 .codec_set_samplerate = NULL, /* aic23_set_samplerate, */
139 .codec_clock_setup = NULL, /* aic23_clock_setup, */
140 .codec_clock_on = NULL, /* aic23_clock_on, */
141 .codec_clock_off = NULL, /* aic23_clock_off, */
142 .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
145 static struct platform_device innovator_mcbsp1_device = {
146 .name = "omap_alsa_mcbsp",
149 .platform_data = &alsa_config,
153 static struct resource innovator_kp_resources[] = {
155 .start = INT_KEYBOARD,
157 .flags = IORESOURCE_IRQ,
161 static struct omap_kp_platform_data innovator_kp_data = {
164 .keymap = innovator_keymap,
165 .keymapsize = ARRAY_SIZE(innovator_keymap),
169 static struct platform_device innovator_kp_device = {
170 .name = "omap-keypad",
173 .platform_data = &innovator_kp_data,
175 .num_resources = ARRAY_SIZE(innovator_kp_resources),
176 .resource = innovator_kp_resources,
180 #ifdef CONFIG_ARCH_OMAP15XX
182 #include <linux/spi/spi.h>
183 #include <linux/spi/ads7846.h>
186 /* Only FPGA needs to be mapped here. All others are done with ioremap */
187 static struct map_desc innovator1510_io_desc[] __initdata = {
189 .virtual = OMAP1510_FPGA_BASE,
190 .pfn = __phys_to_pfn(OMAP1510_FPGA_START),
191 .length = OMAP1510_FPGA_SIZE,
196 static struct resource innovator1510_smc91x_resources[] = {
198 .start = OMAP1510_FPGA_ETHR_START, /* Physical */
199 .end = OMAP1510_FPGA_ETHR_START + 0xf,
200 .flags = IORESOURCE_MEM,
203 .start = OMAP1510_INT_ETHER,
204 .end = OMAP1510_INT_ETHER,
205 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
209 static struct platform_device innovator1510_smc91x_device = {
212 .num_resources = ARRAY_SIZE(innovator1510_smc91x_resources),
213 .resource = innovator1510_smc91x_resources,
216 static struct platform_device innovator1510_lcd_device = {
217 .name = "lcd_inn1510",
221 static struct platform_device innovator1510_spi_device = {
222 .name = "spi_inn1510",
226 static struct platform_device *innovator1510_devices[] __initdata = {
227 &innovator_flash_device,
228 &innovator1510_smc91x_device,
229 &innovator_mcbsp1_device,
230 &innovator_kp_device,
231 &innovator1510_lcd_device,
232 &innovator1510_spi_device,
235 static int innovator_get_pendown_state(void)
237 return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
240 static const struct ads7846_platform_data innovator1510_ts_info = {
242 .vref_delay_usecs = 100, /* internal, no capacitor */
245 .get_pendown_state = innovator_get_pendown_state,
248 static struct spi_board_info __initdata innovator1510_boardinfo[] = { {
249 /* FPGA (bus "10") CS0 has an ads7846e */
250 .modalias = "ads7846",
251 .platform_data = &innovator1510_ts_info,
252 .irq = OMAP1510_INT_FPGA_TS,
253 .max_speed_hz = 120000 /* max sample rate at 3V */
254 * 26 /* command + data + overhead */,
259 #endif /* CONFIG_ARCH_OMAP15XX */
261 #ifdef CONFIG_ARCH_OMAP16XX
263 static struct resource innovator1610_smc91x_resources[] = {
265 .start = INNOVATOR1610_ETHR_START, /* Physical */
266 .end = INNOVATOR1610_ETHR_START + 0xf,
267 .flags = IORESOURCE_MEM,
270 .start = OMAP_GPIO_IRQ(0),
271 .end = OMAP_GPIO_IRQ(0),
272 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
276 static struct platform_device innovator1610_smc91x_device = {
279 .num_resources = ARRAY_SIZE(innovator1610_smc91x_resources),
280 .resource = innovator1610_smc91x_resources,
283 static struct platform_device innovator1610_lcd_device = {
284 .name = "inn1610_lcd",
288 static struct platform_device *innovator1610_devices[] __initdata = {
289 &innovator_flash_device,
290 &innovator1610_smc91x_device,
291 &innovator_kp_device,
292 &innovator1610_lcd_device,
295 #endif /* CONFIG_ARCH_OMAP16XX */
297 static void __init innovator_init_smc91x(void)
299 if (cpu_is_omap1510()) {
300 fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
304 if ((omap_request_gpio(0)) < 0) {
305 printk("Error requesting gpio 0 for smc91x irq\n");
311 static void __init innovator_init_irq(void)
313 omap1_init_common_hw();
316 #ifdef CONFIG_ARCH_OMAP15XX
317 if (cpu_is_omap1510()) {
318 omap1510_fpga_init_irq();
321 innovator_init_smc91x();
324 #ifdef CONFIG_ARCH_OMAP15XX
325 static struct omap_usb_config innovator1510_usb_config __initdata = {
326 /* for bundled non-standard host and peripheral cables */
331 .pins[2] = 6, /* Conflicts with UART2 */
337 static struct omap_lcd_config innovator1510_lcd_config __initdata = {
338 .ctrl_name = "internal",
342 #ifdef CONFIG_ARCH_OMAP16XX
343 static struct omap_usb_config h2_usb_config __initdata = {
344 /* usb1 has a Mini-AB port and external isp1301 transceiver */
347 #ifdef CONFIG_USB_GADGET_OMAP
348 .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
349 /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */
350 #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
351 /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
352 .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */
358 static struct omap_lcd_config innovator1610_lcd_config __initdata = {
359 .ctrl_name = "internal",
363 static struct omap_mmc_config innovator_mmc_config __initdata = {
367 .wp_pin = OMAP_MPUIO(3),
368 .power_pin = -1, /* FPGA F3 UIO42 */
369 .switch_pin = -1, /* FPGA F4 UIO43 */
373 static struct omap_uart_config innovator_uart_config __initdata = {
374 .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
377 static struct omap_board_config_kernel innovator_config[] = {
378 { OMAP_TAG_USB, NULL },
379 { OMAP_TAG_LCD, NULL },
380 { OMAP_TAG_MMC, &innovator_mmc_config },
381 { OMAP_TAG_UART, &innovator_uart_config },
384 static void __init innovator_init(void)
386 #ifdef CONFIG_ARCH_OMAP15XX
387 if (cpu_is_omap1510()) {
388 platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
389 spi_register_board_info(innovator1510_boardinfo,
390 ARRAY_SIZE(innovator1510_boardinfo));
393 #ifdef CONFIG_ARCH_OMAP16XX
394 if (!cpu_is_omap1510()) {
395 platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
399 #ifdef CONFIG_ARCH_OMAP15XX
400 if (cpu_is_omap1510()) {
401 innovator_config[0].data = &innovator1510_usb_config;
402 innovator_config[1].data = &innovator1510_lcd_config;
405 #ifdef CONFIG_ARCH_OMAP16XX
406 if (cpu_is_omap1610()) {
407 innovator_config[0].data = &h2_usb_config;
408 innovator_config[1].data = &innovator1610_lcd_config;
411 omap_board_config = innovator_config;
412 omap_board_config_size = ARRAY_SIZE(innovator_config);
414 omap_register_i2c_bus(1, 100, NULL, 0);
417 static void __init innovator_map_io(void)
419 omap1_map_common_io();
421 #ifdef CONFIG_ARCH_OMAP15XX
422 if (cpu_is_omap1510()) {
423 iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
424 udelay(10); /* Delay needed for FPGA */
426 /* Dump the Innovator FPGA rev early - useful info for support. */
427 printk("Innovator FPGA Rev %d.%d Board Rev %d\n",
428 fpga_read(OMAP1510_FPGA_REV_HIGH),
429 fpga_read(OMAP1510_FPGA_REV_LOW),
430 fpga_read(OMAP1510_FPGA_BOARD_REV));
435 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
436 /* Maintainer: MontaVista Software, Inc. */
437 .phys_io = 0xfff00000,
438 .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
439 .boot_params = 0x10000100,
440 .map_io = innovator_map_io,
441 .init_irq = innovator_init_irq,
442 .init_machine = innovator_init,
443 .timer = &omap_timer,