git.oblomov.eu Git - linux-2.6/blob - drivers/usb/host/ehci-hub.c

   1 /*
   2  * Copyright (C) 2001-2004 by David Brownell
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of the GNU General Public License as published by the
   6  * Free Software Foundation; either version 2 of the License, or (at your
   7  * option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful, but
  10  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  11  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  12  * for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software Foundation,
  16  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  17  */
  18
  19 /* this file is part of ehci-hcd.c */
  20
  21 /*-------------------------------------------------------------------------*/
  22
  23 /*
  24  * EHCI Root Hub ... the nonsharable stuff
  25  *
  26  * Registers don't need cpu_to_le32, that happens transparently
  27  */
  28
  29 /*-------------------------------------------------------------------------*/
  30
  31 #ifdef  CONFIG_PM
  32
  33 static int ehci_bus_suspend (struct usb_hcd *hcd)
  34 {
  35         struct ehci_hcd         *ehci = hcd_to_ehci (hcd);
  36         int                     port;
  37         int                     mask;
  38
  39         if (time_before (jiffies, ehci->next_statechange))
  40                 msleep(5);
  41
  42         port = HCS_N_PORTS (ehci->hcs_params);
  43         spin_lock_irq (&ehci->lock);
  44
  45         /* stop schedules, clean any completed work */
  46         if (HC_IS_RUNNING(hcd->state)) {
  47                 ehci_quiesce (ehci);
  48                 hcd->state = HC_STATE_QUIESCING;
  49         }
  50         ehci->command = ehci_readl(ehci, &ehci->regs->command);
  51         if (ehci->reclaim)
  52                 ehci->reclaim_ready = 1;
  53         ehci_work(ehci);
  54
  55         /* Unlike other USB host controller types, EHCI doesn't have
  56          * any notion of "global" or bus-wide suspend.  The driver has
  57          * to manually suspend all the active unsuspended ports, and
  58          * then manually resume them in the bus_resume() routine.
  59          */
  60         ehci->bus_suspended = 0;
  61         while (port--) {
  62                 u32 __iomem     *reg = &ehci->regs->port_status [port];
  63                 u32             t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
  64                 u32             t2 = t1;
  65
  66                 /* keep track of which ports we suspend */
  67                 if ((t1 & PORT_PE) && !(t1 & PORT_OWNER) &&
  68                                 !(t1 & PORT_SUSPEND)) {
  69                         t2 |= PORT_SUSPEND;
  70                         set_bit(port, &ehci->bus_suspended);
  71                 }
  72
  73                 /* enable remote wakeup on all ports */
  74                 if (device_may_wakeup(&hcd->self.root_hub->dev))
  75                         t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E;
  76                 else
  77                         t2 &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E);
  78
  79                 if (t1 != t2) {
  80                         ehci_vdbg (ehci, "port %d, %08x -> %08x\n",
  81                                 port + 1, t1, t2);
  82                         ehci_writel(ehci, t2, reg);
  83                 }
  84         }
  85
  86         /* turn off now-idle HC */
  87         del_timer_sync (&ehci->watchdog);
  88         ehci_halt (ehci);
  89         hcd->state = HC_STATE_SUSPENDED;
  90
  91         /* allow remote wakeup */
  92         mask = INTR_MASK;
  93         if (!device_may_wakeup(&hcd->self.root_hub->dev))
  94                 mask &= ~STS_PCD;
  95         ehci_writel(ehci, mask, &ehci->regs->intr_enable);
  96         ehci_readl(ehci, &ehci->regs->intr_enable);
  97
  98         ehci->next_statechange = jiffies + msecs_to_jiffies(10);
  99         spin_unlock_irq (&ehci->lock);
 100         return 0;
 101 }
 102
 103
 104 /* caller has locked the root hub, and should reset/reinit on error */
 105 static int ehci_bus_resume (struct usb_hcd *hcd)
 106 {
 107         struct ehci_hcd         *ehci = hcd_to_ehci (hcd);
 108         u32                     temp;
 109         int                     i;
 110
 111         if (time_before (jiffies, ehci->next_statechange))
 112                 msleep(5);
 113         spin_lock_irq (&ehci->lock);
 114
 115         /* Ideally and we've got a real resume here, and no port's power
 116          * was lost.  (For PCI, that means Vaux was maintained.)  But we
 117          * could instead be restoring a swsusp snapshot -- so that BIOS was
 118          * the last user of the controller, not reset/pm hardware keeping
 119          * state we gave to it.
 120          */
 121         temp = ehci_readl(ehci, &ehci->regs->intr_enable);
 122         ehci_dbg(ehci, "resume root hub%s\n", temp ? "" : " after power loss");
 123
 124         /* at least some APM implementations will try to deliver
 125          * IRQs right away, so delay them until we're ready.
 126          */
 127         ehci_writel(ehci, 0, &ehci->regs->intr_enable);
 128
 129         /* re-init operational registers */
 130         ehci_writel(ehci, 0, &ehci->regs->segment);
 131         ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
 132         ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next);
 133
 134         /* restore CMD_RUN, framelist size, and irq threshold */
 135         ehci_writel(ehci, ehci->command, &ehci->regs->command);
 136
 137         /* manually resume the ports we suspended during bus_suspend() */
 138         i = HCS_N_PORTS (ehci->hcs_params);
 139         while (i--) {
 140                 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
 141                 temp &= ~(PORT_RWC_BITS
 142                         | PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E);
 143                 if (test_bit(i, &ehci->bus_suspended) &&
 144                                 (temp & PORT_SUSPEND)) {
 145                         ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
 146                         temp |= PORT_RESUME;
 147                 }
 148                 ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
 149         }
 150         i = HCS_N_PORTS (ehci->hcs_params);
 151         mdelay (20);
 152         while (i--) {
 153                 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
 154                 if (test_bit(i, &ehci->bus_suspended) &&
 155                                 (temp & PORT_SUSPEND)) {
 156                         temp &= ~(PORT_RWC_BITS | PORT_RESUME);
 157                         ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
 158                         ehci_vdbg (ehci, "resumed port %d\n", i + 1);
 159                 }
 160         }
 161         (void) ehci_readl(ehci, &ehci->regs->command);
 162
 163         /* maybe re-activate the schedule(s) */
 164         temp = 0;
 165         if (ehci->async->qh_next.qh)
 166                 temp |= CMD_ASE;
 167         if (ehci->periodic_sched)
 168                 temp |= CMD_PSE;
 169         if (temp) {
 170                 ehci->command |= temp;
 171                 ehci_writel(ehci, ehci->command, &ehci->regs->command);
 172         }
 173
 174         ehci->next_statechange = jiffies + msecs_to_jiffies(5);
 175         hcd->state = HC_STATE_RUNNING;
 176
 177         /* Now we can safely re-enable irqs */
 178         ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);
 179
 180         spin_unlock_irq (&ehci->lock);
 181         return 0;
 182 }
 183
 184 #else
 185
 186 #define ehci_bus_suspend        NULL
 187 #define ehci_bus_resume         NULL
 188
 189 #endif  /* CONFIG_PM */
 190
 191 /*-------------------------------------------------------------------------*/
 192
 193 /* Display the ports dedicated to the companion controller */
 194 static ssize_t show_companion(struct class_device *class_dev, char *buf)
 195 {
 196         struct ehci_hcd         *ehci;
 197         int                     nports, index, n;
 198         int                     count = PAGE_SIZE;
 199         char                    *ptr = buf;
 200
 201         ehci = hcd_to_ehci(bus_to_hcd(class_get_devdata(class_dev)));
 202         nports = HCS_N_PORTS(ehci->hcs_params);
 203
 204         for (index = 0; index < nports; ++index) {
 205                 if (test_bit(index, &ehci->companion_ports)) {
 206                         n = scnprintf(ptr, count, "%d\n", index + 1);
 207                         ptr += n;
 208                         count -= n;
 209                 }
 210         }
 211         return ptr - buf;
 212 }
 213
 214 /*
 215  * Dedicate or undedicate a port to the companion controller.
 216  * Syntax is "[-]portnum", where a leading '-' sign means
 217  * return control of the port to the EHCI controller.
 218  */
 219 static ssize_t store_companion(struct class_device *class_dev,
 220                 const char *buf, size_t count)
 221 {
 222         struct ehci_hcd         *ehci;
 223         int                     portnum, new_owner, try;
 224         u32 __iomem             *status_reg;
 225         u32                     port_status;
 226
 227         ehci = hcd_to_ehci(bus_to_hcd(class_get_devdata(class_dev)));
 228         new_owner = PORT_OWNER;         /* Owned by companion */
 229         if (sscanf(buf, "%d", &portnum) != 1)
 230                 return -EINVAL;
 231         if (portnum < 0) {
 232                 portnum = - portnum;
 233                 new_owner = 0;          /* Owned by EHCI */
 234         }
 235         if (portnum <= 0 || portnum > HCS_N_PORTS(ehci->hcs_params))
 236                 return -ENOENT;
 237         status_reg = &ehci->regs->port_status[--portnum];
 238         if (new_owner)
 239                 set_bit(portnum, &ehci->companion_ports);
 240         else
 241                 clear_bit(portnum, &ehci->companion_ports);
 242
 243         /*
 244          * The controller won't set the OWNER bit if the port is
 245          * enabled, so this loop will sometimes require at least two
 246          * iterations: one to disable the port and one to set OWNER.
 247          */
 248
 249         for (try = 4; try > 0; --try) {
 250                 spin_lock_irq(&ehci->lock);
 251                 port_status = ehci_readl(ehci, status_reg);
 252                 if ((port_status & PORT_OWNER) == new_owner
 253                                 || (port_status & (PORT_OWNER | PORT_CONNECT))
 254                                         == 0)
 255                         try = 0;
 256                 else {
 257                         port_status ^= PORT_OWNER;
 258                         port_status &= ~(PORT_PE | PORT_RWC_BITS);
 259                         ehci_writel(ehci, port_status, status_reg);
 260                 }
 261                 spin_unlock_irq(&ehci->lock);
 262                 if (try > 1)
 263                         msleep(5);
 264         }
 265         return count;
 266 }
 267 static CLASS_DEVICE_ATTR(companion, 0644, show_companion, store_companion);
 268
 269 static inline void create_companion_file(struct ehci_hcd *ehci)
 270 {
 271         int     i;
 272
 273         /* with integrated TT there is no companion! */
 274         if (!ehci_is_TDI(ehci))
 275                 i = class_device_create_file(ehci_to_hcd(ehci)->self.class_dev,
 276                                 &class_device_attr_companion);
 277 }
 278
 279 static inline void remove_companion_file(struct ehci_hcd *ehci)
 280 {
 281         /* with integrated TT there is no companion! */
 282         if (!ehci_is_TDI(ehci))
 283                 class_device_remove_file(ehci_to_hcd(ehci)->self.class_dev,
 284                                 &class_device_attr_companion);
 285 }
 286
 287
 288 /*-------------------------------------------------------------------------*/
 289
 290 static int check_reset_complete (
 291         struct ehci_hcd *ehci,
 292         int             index,
 293         u32 __iomem     *status_reg,
 294         int             port_status
 295 ) {
 296         if (!(port_status & PORT_CONNECT)) {
 297                 ehci->reset_done [index] = 0;
 298                 return port_status;
 299         }
 300
 301         /* if reset finished and it's still not enabled -- handoff */
 302         if (!(port_status & PORT_PE)) {
 303
 304                 /* with integrated TT, there's nobody to hand it to! */
 305                 if (ehci_is_TDI(ehci)) {
 306                         ehci_dbg (ehci,
 307                                 "Failed to enable port %d on root hub TT\n",
 308                                 index+1);
 309                         return port_status;
 310                 }
 311
 312                 ehci_dbg (ehci, "port %d full speed --> companion\n",
 313                         index + 1);
 314
 315                 // what happens if HCS_N_CC(params) == 0 ?
 316                 port_status |= PORT_OWNER;
 317                 port_status &= ~PORT_RWC_BITS;
 318                 ehci_writel(ehci, port_status, status_reg);
 319
 320         } else
 321                 ehci_dbg (ehci, "port %d high speed\n", index + 1);
 322
 323         return port_status;
 324 }
 325
 326 /*-------------------------------------------------------------------------*/
 327
 328
 329 /* build "status change" packet (one or two bytes) from HC registers */
 330
 331 static int
 332 ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 333 {
 334         struct ehci_hcd *ehci = hcd_to_ehci (hcd);
 335         u32             temp, status = 0;
 336         u32             mask;
 337         int             ports, i, retval = 1;
 338         unsigned long   flags;
 339
 340         /* if !USB_SUSPEND, root hub timers won't get shut down ... */
 341         if (!HC_IS_RUNNING(hcd->state))
 342                 return 0;
 343
 344         /* init status to no-changes */
 345         buf [0] = 0;
 346         ports = HCS_N_PORTS (ehci->hcs_params);
 347         if (ports > 7) {
 348                 buf [1] = 0;
 349                 retval++;
 350         }
 351
 352         /* Some boards (mostly VIA?) report bogus overcurrent indications,
 353          * causing massive log spam unless we completely ignore them.  It
 354          * may be relevant that VIA VT8235 controlers, where PORT_POWER is
 355          * always set, seem to clear PORT_OCC and PORT_CSC when writing to
 356          * PORT_POWER; that's surprising, but maybe within-spec.
 357          */
 358         if (!ignore_oc)
 359                 mask = PORT_CSC | PORT_PEC | PORT_OCC;
 360         else
 361                 mask = PORT_CSC | PORT_PEC;
 362         // PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
 363
 364         /* no hub change reports (bit 0) for now (power, ...) */
 365
 366         /* port N changes (bit N)? */
 367         spin_lock_irqsave (&ehci->lock, flags);
 368         for (i = 0; i < ports; i++) {
 369                 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
 370
 371                 /*
 372                  * Return status information even for ports with OWNER set.
 373                  * Otherwise khubd wouldn't see the disconnect event when a
 374                  * high-speed device is switched over to the companion
 375                  * controller by the user.
 376                  */
 377
 378                 if (!(temp & PORT_CONNECT))
 379                         ehci->reset_done [i] = 0;
 380                 if ((temp & mask) != 0
 381                                 || ((temp & PORT_RESUME) != 0
 382                                         && time_after_eq(jiffies,
 383                                                 ehci->reset_done[i]))) {
 384                         if (i < 7)
 385                             buf [0] |= 1 << (i + 1);
 386                         else
 387                             buf [1] |= 1 << (i - 7);
 388                         status = STS_PCD;
 389                 }
 390         }
 391         /* FIXME autosuspend idle root hubs */
 392         spin_unlock_irqrestore (&ehci->lock, flags);
 393         return status ? retval : 0;
 394 }
 395
 396 /*-------------------------------------------------------------------------*/
 397
 398 static void
 399 ehci_hub_descriptor (
 400         struct ehci_hcd                 *ehci,
 401         struct usb_hub_descriptor       *desc
 402 ) {
 403         int             ports = HCS_N_PORTS (ehci->hcs_params);
 404         u16             temp;
 405
 406         desc->bDescriptorType = 0x29;
 407         desc->bPwrOn2PwrGood = 10;      /* ehci 1.0, 2.3.9 says 20ms max */
 408         desc->bHubContrCurrent = 0;
 409
 410         desc->bNbrPorts = ports;
 411         temp = 1 + (ports / 8);
 412         desc->bDescLength = 7 + 2 * temp;
 413
 414         /* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
 415         memset (&desc->bitmap [0], 0, temp);
 416         memset (&desc->bitmap [temp], 0xff, temp);
 417
 418         temp = 0x0008;                  /* per-port overcurrent reporting */
 419         if (HCS_PPC (ehci->hcs_params))
 420                 temp |= 0x0001;         /* per-port power control */
 421         else
 422                 temp |= 0x0002;         /* no power switching */
 423 #if 0
 424 // re-enable when we support USB_PORT_FEAT_INDICATOR below.
 425         if (HCS_INDICATOR (ehci->hcs_params))
 426                 temp |= 0x0080;         /* per-port indicators (LEDs) */
 427 #endif
 428         desc->wHubCharacteristics = (__force __u16)cpu_to_le16 (temp);
 429 }
 430
 431 /*-------------------------------------------------------------------------*/
 432
 433 #define PORT_WAKE_BITS  (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
 434
 435 static int ehci_hub_control (
 436         struct usb_hcd  *hcd,
 437         u16             typeReq,
 438         u16             wValue,
 439         u16             wIndex,
 440         char            *buf,
 441         u16             wLength
 442 ) {
 443         struct ehci_hcd *ehci = hcd_to_ehci (hcd);
 444         int             ports = HCS_N_PORTS (ehci->hcs_params);
 445         u32 __iomem     *status_reg = &ehci->regs->port_status[wIndex - 1];
 446         u32             temp, status;
 447         unsigned long   flags;
 448         int             retval = 0;
 449         unsigned        selector;
 450
 451         /*
 452          * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
 453          * HCS_INDICATOR may say we can change LEDs to off/amber/green.
 454          * (track current state ourselves) ... blink for diagnostics,
 455          * power, "this is the one", etc.  EHCI spec supports this.
 456          */
 457
 458         spin_lock_irqsave (&ehci->lock, flags);
 459         switch (typeReq) {
 460         case ClearHubFeature:
 461                 switch (wValue) {
 462                 case C_HUB_LOCAL_POWER:
 463                 case C_HUB_OVER_CURRENT:
 464                         /* no hub-wide feature/status flags */
 465                         break;
 466                 default:
 467                         goto error;
 468                 }
 469                 break;
 470         case ClearPortFeature:
 471                 if (!wIndex || wIndex > ports)
 472                         goto error;
 473                 wIndex--;
 474                 temp = ehci_readl(ehci, status_reg);
 475
 476                 /*
 477                  * Even if OWNER is set, so the port is owned by the
 478                  * companion controller, khubd needs to be able to clear
 479                  * the port-change status bits (especially
 480                  * USB_PORT_FEAT_C_CONNECTION).
 481                  */
 482
 483                 switch (wValue) {
 484                 case USB_PORT_FEAT_ENABLE:
 485                         ehci_writel(ehci, temp & ~PORT_PE, status_reg);
 486                         break;
 487                 case USB_PORT_FEAT_C_ENABLE:
 488                         ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_PEC,
 489                                         status_reg);
 490                         break;
 491                 case USB_PORT_FEAT_SUSPEND:
 492                         if (temp & PORT_RESET)
 493                                 goto error;
 494                         if (ehci->no_selective_suspend)
 495                                 break;
 496                         if (temp & PORT_SUSPEND) {
 497                                 if ((temp & PORT_PE) == 0)
 498                                         goto error;
 499                                 /* resume signaling for 20 msec */
 500                                 temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
 501                                 ehci_writel(ehci, temp | PORT_RESUME,
 502                                                 status_reg);
 503                                 ehci->reset_done [wIndex] = jiffies
 504                                                 + msecs_to_jiffies (20);
 505                         }
 506                         break;
 507                 case USB_PORT_FEAT_C_SUSPEND:
 508                         /* we auto-clear this feature */
 509                         break;
 510                 case USB_PORT_FEAT_POWER:
 511                         if (HCS_PPC (ehci->hcs_params))
 512                                 ehci_writel(ehci,
 513                                           temp & ~(PORT_RWC_BITS | PORT_POWER),
 514                                           status_reg);
 515                         break;
 516                 case USB_PORT_FEAT_C_CONNECTION:
 517                         ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC,
 518                                         status_reg);
 519                         break;
 520                 case USB_PORT_FEAT_C_OVER_CURRENT:
 521                         ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_OCC,
 522                                         status_reg);
 523                         break;
 524                 case USB_PORT_FEAT_C_RESET:
 525                         /* GetPortStatus clears reset */
 526                         break;
 527                 default:
 528                         goto error;
 529                 }
 530                 ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */
 531                 break;
 532         case GetHubDescriptor:
 533                 ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
 534                         buf);
 535                 break;
 536         case GetHubStatus:
 537                 /* no hub-wide feature/status flags */
 538                 memset (buf, 0, 4);
 539                 //cpu_to_le32s ((u32 *) buf);
 540                 break;
 541         case GetPortStatus:
 542                 if (!wIndex || wIndex > ports)
 543                         goto error;
 544                 wIndex--;
 545                 status = 0;
 546                 temp = ehci_readl(ehci, status_reg);
 547
 548                 // wPortChange bits
 549                 if (temp & PORT_CSC)
 550                         status |= 1 << USB_PORT_FEAT_C_CONNECTION;
 551                 if (temp & PORT_PEC)
 552                         status |= 1 << USB_PORT_FEAT_C_ENABLE;
 553                 if ((temp & PORT_OCC) && !ignore_oc)
 554                         status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
 555
 556                 /* whoever resumes must GetPortStatus to complete it!! */
 557                 if (temp & PORT_RESUME) {
 558
 559                         /* Remote Wakeup received? */
 560                         if (!ehci->reset_done[wIndex]) {
 561                                 /* resume signaling for 20 msec */
 562                                 ehci->reset_done[wIndex] = jiffies
 563                                                 + msecs_to_jiffies(20);
 564                                 /* check the port again */
 565                                 mod_timer(&ehci_to_hcd(ehci)->rh_timer,
 566                                                 ehci->reset_done[wIndex]);
 567                         }
 568
 569                         /* resume completed? */
 570                         else if (time_after_eq(jiffies,
 571                                         ehci->reset_done[wIndex])) {
 572                                 status |= 1 << USB_PORT_FEAT_C_SUSPEND;
 573                                 ehci->reset_done[wIndex] = 0;
 574
 575                                 /* stop resume signaling */
 576                                 temp = ehci_readl(ehci, status_reg);
 577                                 ehci_writel(ehci,
 578                                         temp & ~(PORT_RWC_BITS | PORT_RESUME),
 579                                         status_reg);
 580                                 retval = handshake(ehci, status_reg,
 581                                            PORT_RESUME, 0, 2000 /* 2msec */);
 582                                 if (retval != 0) {
 583                                         ehci_err(ehci,
 584                                                 "port %d resume error %d\n",
 585                                                 wIndex + 1, retval);
 586                                         goto error;
 587                                 }
 588                                 temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
 589                         }
 590                 }
 591
 592                 /* whoever resets must GetPortStatus to complete it!! */
 593                 if ((temp & PORT_RESET)
 594                                 && time_after_eq(jiffies,
 595                                         ehci->reset_done[wIndex])) {
 596                         status |= 1 << USB_PORT_FEAT_C_RESET;
 597                         ehci->reset_done [wIndex] = 0;
 598
 599                         /* force reset to complete */
 600                         ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
 601                                         status_reg);
 602                         /* REVISIT:  some hardware needs 550+ usec to clear
 603                          * this bit; seems too long to spin routinely...
 604                          */
 605                         retval = handshake(ehci, status_reg,
 606                                         PORT_RESET, 0, 750);
 607                         if (retval != 0) {
 608                                 ehci_err (ehci, "port %d reset error %d\n",
 609                                         wIndex + 1, retval);
 610                                 goto error;
 611                         }
 612
 613                         /* see what we found out */
 614                         temp = check_reset_complete (ehci, wIndex, status_reg,
 615                                         ehci_readl(ehci, status_reg));
 616                 }
 617
 618                 /* transfer dedicated ports to the companion hc */
 619                 if ((temp & PORT_CONNECT) &&
 620                                 test_bit(wIndex, &ehci->companion_ports)) {
 621                         temp &= ~PORT_RWC_BITS;
 622                         temp |= PORT_OWNER;
 623                         ehci_writel(ehci, temp, status_reg);
 624                         ehci_dbg(ehci, "port %d --> companion\n", wIndex + 1);
 625                         temp = ehci_readl(ehci, status_reg);
 626                 }
 627
 628                 /*
 629                  * Even if OWNER is set, there's no harm letting khubd
 630                  * see the wPortStatus values (they should all be 0 except
 631                  * for PORT_POWER anyway).
 632                  */
 633
 634                 if (temp & PORT_CONNECT) {
 635                         status |= 1 << USB_PORT_FEAT_CONNECTION;
 636                         // status may be from integrated TT
 637                         status |= ehci_port_speed(ehci, temp);
 638                 }
 639                 if (temp & PORT_PE)
 640                         status |= 1 << USB_PORT_FEAT_ENABLE;
 641                 if (temp & (PORT_SUSPEND|PORT_RESUME))
 642                         status |= 1 << USB_PORT_FEAT_SUSPEND;
 643                 if (temp & PORT_OC)
 644                         status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
 645                 if (temp & PORT_RESET)
 646                         status |= 1 << USB_PORT_FEAT_RESET;
 647                 if (temp & PORT_POWER)
 648                         status |= 1 << USB_PORT_FEAT_POWER;
 649
 650 #ifndef EHCI_VERBOSE_DEBUG
 651         if (status & ~0xffff)   /* only if wPortChange is interesting */
 652 #endif
 653                 dbg_port (ehci, "GetStatus", wIndex + 1, temp);
 654                 // we "know" this alignment is good, caller used kmalloc()...
 655                 *((__le32 *) buf) = cpu_to_le32 (status);
 656                 break;
 657         case SetHubFeature:
 658                 switch (wValue) {
 659                 case C_HUB_LOCAL_POWER:
 660                 case C_HUB_OVER_CURRENT:
 661                         /* no hub-wide feature/status flags */
 662                         break;
 663                 default:
 664                         goto error;
 665                 }
 666                 break;
 667         case SetPortFeature:
 668                 selector = wIndex >> 8;
 669                 wIndex &= 0xff;
 670                 if (!wIndex || wIndex > ports)
 671                         goto error;
 672                 wIndex--;
 673                 temp = ehci_readl(ehci, status_reg);
 674                 if (temp & PORT_OWNER)
 675                         break;
 676
 677                 temp &= ~PORT_RWC_BITS;
 678                 switch (wValue) {
 679                 case USB_PORT_FEAT_SUSPEND:
 680                         if (ehci->no_selective_suspend)
 681                                 break;
 682                         if ((temp & PORT_PE) == 0
 683                                         || (temp & PORT_RESET) != 0)
 684                                 goto error;
 685                         if (device_may_wakeup(&hcd->self.root_hub->dev))
 686                                 temp |= PORT_WAKE_BITS;
 687                         ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
 688                         break;
 689                 case USB_PORT_FEAT_POWER:
 690                         if (HCS_PPC (ehci->hcs_params))
 691                                 ehci_writel(ehci, temp | PORT_POWER,
 692                                                 status_reg);
 693                         break;
 694                 case USB_PORT_FEAT_RESET:
 695                         if (temp & PORT_RESUME)
 696                                 goto error;
 697                         /* line status bits may report this as low speed,
 698                          * which can be fine if this root hub has a
 699                          * transaction translator built in.
 700                          */
 701                         if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
 702                                         && !ehci_is_TDI(ehci)
 703                                         && PORT_USB11 (temp)) {
 704                                 ehci_dbg (ehci,
 705                                         "port %d low speed --> companion\n",
 706                                         wIndex + 1);
 707                                 temp |= PORT_OWNER;
 708                         } else {
 709                                 ehci_vdbg (ehci, "port %d reset\n", wIndex + 1);
 710                                 temp |= PORT_RESET;
 711                                 temp &= ~PORT_PE;
 712
 713                                 /*
 714                                  * caller must wait, then call GetPortStatus
 715                                  * usb 2.0 spec says 50 ms resets on root
 716                                  */
 717                                 ehci->reset_done [wIndex] = jiffies
 718                                                 + msecs_to_jiffies (50);
 719                         }
 720                         ehci_writel(ehci, temp, status_reg);
 721                         break;
 722
 723                 /* For downstream facing ports (these):  one hub port is put
 724                  * into test mode according to USB2 11.24.2.13, then the hub
 725                  * must be reset (which for root hub now means rmmod+modprobe,
 726                  * or else system reboot).  See EHCI 2.3.9 and 4.14 for info
 727                  * about the EHCI-specific stuff.
 728                  */
 729                 case USB_PORT_FEAT_TEST:
 730                         if (!selector || selector > 5)
 731                                 goto error;
 732                         ehci_quiesce(ehci);
 733                         ehci_halt(ehci);
 734                         temp |= selector << 16;
 735                         ehci_writel(ehci, temp, status_reg);
 736                         break;
 737
 738                 default:
 739                         goto error;
 740                 }
 741                 ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
 742                 break;
 743
 744         default:
 745 error:
 746                 /* "stall" on error */
 747                 retval = -EPIPE;
 748         }
 749         spin_unlock_irqrestore (&ehci->lock, flags);
 750         return retval;
 751 }