2 * arch/s390/kernel/setup.c
5 * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
6 * Author(s): Hartmut Penner (hp@de.ibm.com),
7 * Martin Schwidefsky (schwidefsky@de.ibm.com)
9 * Derived from "arch/i386/kernel/setup.c"
10 * Copyright (C) 1995, Linus Torvalds
14 * This file handles the architecture-dependent parts of initialization
17 #include <linux/errno.h>
18 #include <linux/module.h>
19 #include <linux/sched.h>
20 #include <linux/kernel.h>
22 #include <linux/stddef.h>
23 #include <linux/unistd.h>
24 #include <linux/ptrace.h>
25 #include <linux/slab.h>
26 #include <linux/user.h>
27 #include <linux/a.out.h>
28 #include <linux/tty.h>
29 #include <linux/ioport.h>
30 #include <linux/delay.h>
31 #include <linux/init.h>
32 #include <linux/initrd.h>
33 #include <linux/bootmem.h>
34 #include <linux/root_dev.h>
35 #include <linux/console.h>
36 #include <linux/seq_file.h>
37 #include <linux/kernel_stat.h>
38 #include <linux/device.h>
39 #include <linux/notifier.h>
41 #include <asm/uaccess.h>
42 #include <asm/system.h>
44 #include <asm/mmu_context.h>
45 #include <asm/cpcmd.h>
46 #include <asm/lowcore.h>
49 #include <asm/ptrace.h>
50 #include <asm/sections.h>
55 unsigned int console_mode = 0;
56 unsigned int console_devno = -1;
57 unsigned int console_irq = -1;
58 unsigned long memory_size = 0;
59 unsigned long machine_flags = 0;
61 unsigned long addr, size, type;
62 } memory_chunk[MEMORY_CHUNKS] = { { 0 } };
63 #define CHUNK_READ_WRITE 0
64 #define CHUNK_READ_ONLY 1
65 volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */
66 unsigned long __initdata zholes_size[MAX_NR_ZONES];
67 static unsigned long __initdata memory_end;
70 * This is set up by the setup-routine at boot-time
71 * for S390 need to find out, what we have to setup
72 * using address 0x10400 ...
75 #include <asm/setup.h>
77 static struct resource code_resource = {
78 .name = "Kernel code",
79 .flags = IORESOURCE_BUSY | IORESOURCE_MEM,
82 static struct resource data_resource = {
83 .name = "Kernel data",
84 .flags = IORESOURCE_BUSY | IORESOURCE_MEM,
88 * cpu_init() initializes state that is per-CPU.
90 void __devinit cpu_init (void)
92 int addr = hard_smp_processor_id();
95 * Store processor id in lowcore (used e.g. in timer_interrupt)
97 asm volatile ("stidp %0": "=m" (S390_lowcore.cpu_data.cpu_id));
98 S390_lowcore.cpu_data.cpu_addr = addr;
101 * Force FPU initialization:
103 clear_thread_flag(TIF_USEDFPU);
106 atomic_inc(&init_mm.mm_count);
107 current->active_mm = &init_mm;
110 enter_lazy_tlb(&init_mm, current);
114 * VM halt and poweroff setup routines
116 char vmhalt_cmd[128] = "";
117 char vmpoff_cmd[128] = "";
118 char vmpanic_cmd[128] = "";
120 static inline void strncpy_skip_quote(char *dst, char *src, int n)
125 for (sx = 0; src[sx] != 0; sx++) {
126 if (src[sx] == '"') continue;
132 static int __init vmhalt_setup(char *str)
134 strncpy_skip_quote(vmhalt_cmd, str, 127);
139 __setup("vmhalt=", vmhalt_setup);
141 static int __init vmpoff_setup(char *str)
143 strncpy_skip_quote(vmpoff_cmd, str, 127);
148 __setup("vmpoff=", vmpoff_setup);
150 static int vmpanic_notify(struct notifier_block *self, unsigned long event,
153 if (MACHINE_IS_VM && strlen(vmpanic_cmd) > 0)
154 cpcmd(vmpanic_cmd, NULL, 0, NULL);
159 #define PANIC_PRI_VMPANIC 0
161 static struct notifier_block vmpanic_nb = {
162 .notifier_call = vmpanic_notify,
163 .priority = PANIC_PRI_VMPANIC
166 static int __init vmpanic_setup(char *str)
168 static int register_done __initdata = 0;
170 strncpy_skip_quote(vmpanic_cmd, str, 127);
171 vmpanic_cmd[127] = 0;
172 if (!register_done) {
174 atomic_notifier_chain_register(&panic_notifier_list,
180 __setup("vmpanic=", vmpanic_setup);
183 * condev= and conmode= setup parameter.
186 static int __init condev_setup(char *str)
190 vdev = simple_strtoul(str, &str, 0);
191 if (vdev >= 0 && vdev < 65536) {
192 console_devno = vdev;
198 __setup("condev=", condev_setup);
200 static int __init conmode_setup(char *str)
202 #if defined(CONFIG_SCLP_CONSOLE)
203 if (strncmp(str, "hwc", 4) == 0 || strncmp(str, "sclp", 5) == 0)
206 #if defined(CONFIG_TN3215_CONSOLE)
207 if (strncmp(str, "3215", 5) == 0)
210 #if defined(CONFIG_TN3270_CONSOLE)
211 if (strncmp(str, "3270", 5) == 0)
217 __setup("conmode=", conmode_setup);
219 static void __init conmode_default(void)
221 char query_buffer[1024];
225 __cpcmd("QUERY CONSOLE", query_buffer, 1024, NULL);
226 console_devno = simple_strtoul(query_buffer + 5, NULL, 16);
227 ptr = strstr(query_buffer, "SUBCHANNEL =");
228 console_irq = simple_strtoul(ptr + 13, NULL, 16);
229 __cpcmd("QUERY TERM", query_buffer, 1024, NULL);
230 ptr = strstr(query_buffer, "CONMODE");
232 * Set the conmode to 3215 so that the device recognition
233 * will set the cu_type of the console to 3215. If the
234 * conmode is 3270 and we don't set it back then both
235 * 3215 and the 3270 driver will try to access the console
236 * device (3215 as console and 3270 as normal tty).
238 __cpcmd("TERM CONMODE 3215", NULL, 0, NULL);
240 #if defined(CONFIG_SCLP_CONSOLE)
245 if (strncmp(ptr + 8, "3270", 4) == 0) {
246 #if defined(CONFIG_TN3270_CONSOLE)
248 #elif defined(CONFIG_TN3215_CONSOLE)
250 #elif defined(CONFIG_SCLP_CONSOLE)
253 } else if (strncmp(ptr + 8, "3215", 4) == 0) {
254 #if defined(CONFIG_TN3215_CONSOLE)
256 #elif defined(CONFIG_TN3270_CONSOLE)
258 #elif defined(CONFIG_SCLP_CONSOLE)
262 } else if (MACHINE_IS_P390) {
263 #if defined(CONFIG_TN3215_CONSOLE)
265 #elif defined(CONFIG_TN3270_CONSOLE)
269 #if defined(CONFIG_SCLP_CONSOLE)
276 extern void machine_restart_smp(char *);
277 extern void machine_halt_smp(void);
278 extern void machine_power_off_smp(void);
280 void (*_machine_restart)(char *command) = machine_restart_smp;
281 void (*_machine_halt)(void) = machine_halt_smp;
282 void (*_machine_power_off)(void) = machine_power_off_smp;
285 * Reboot, halt and power_off routines for non SMP.
287 extern void reipl(unsigned long devno);
288 extern void reipl_diag(void);
289 static void do_machine_restart_nonsmp(char * __unused)
294 cpcmd ("IPL", NULL, 0, NULL);
296 reipl (0x10000 | S390_lowcore.ipl_device);
299 static void do_machine_halt_nonsmp(void)
301 if (MACHINE_IS_VM && strlen(vmhalt_cmd) > 0)
302 cpcmd(vmhalt_cmd, NULL, 0, NULL);
303 signal_processor(smp_processor_id(), sigp_stop_and_store_status);
306 static void do_machine_power_off_nonsmp(void)
308 if (MACHINE_IS_VM && strlen(vmpoff_cmd) > 0)
309 cpcmd(vmpoff_cmd, NULL, 0, NULL);
310 signal_processor(smp_processor_id(), sigp_stop_and_store_status);
313 void (*_machine_restart)(char *command) = do_machine_restart_nonsmp;
314 void (*_machine_halt)(void) = do_machine_halt_nonsmp;
315 void (*_machine_power_off)(void) = do_machine_power_off_nonsmp;
319 * Reboot, halt and power_off stubs. They just call _machine_restart,
320 * _machine_halt or _machine_power_off.
323 void machine_restart(char *command)
325 if (!in_interrupt() || oops_in_progress)
327 * Only unblank the console if we are called in enabled
328 * context or a bust_spinlocks cleared the way for us.
331 _machine_restart(command);
334 void machine_halt(void)
336 if (!in_interrupt() || oops_in_progress)
338 * Only unblank the console if we are called in enabled
339 * context or a bust_spinlocks cleared the way for us.
345 void machine_power_off(void)
347 if (!in_interrupt() || oops_in_progress)
349 * Only unblank the console if we are called in enabled
350 * context or a bust_spinlocks cleared the way for us.
353 _machine_power_off();
357 * Dummy power off function.
359 void (*pm_power_off)(void) = machine_power_off;
362 add_memory_hole(unsigned long start, unsigned long end)
364 unsigned long dma_pfn = MAX_DMA_ADDRESS >> PAGE_SHIFT;
367 zholes_size[ZONE_DMA] += end - start + 1;
368 else if (start > dma_pfn)
369 zholes_size[ZONE_NORMAL] += end - start + 1;
371 zholes_size[ZONE_DMA] += dma_pfn - start + 1;
372 zholes_size[ZONE_NORMAL] += end - dma_pfn;
376 static int __init early_parse_mem(char *p)
378 memory_end = memparse(p, &p);
381 early_param("mem", early_parse_mem);
384 * "ipldelay=XXX[sm]" sets ipl delay in seconds or minutes
386 static int __init early_parse_ipldelay(char *p)
388 unsigned long delay = 0;
390 delay = simple_strtoul(p, &p, 0);
399 delay *= 60 * 1000000;
402 /* now wait for the requested amount of time */
407 early_param("ipldelay", early_parse_ipldelay);
416 * Setup lowcore for boot cpu
418 lc_pages = sizeof(void *) == 8 ? 2 : 1;
419 lc = (struct _lowcore *)
420 __alloc_bootmem(lc_pages * PAGE_SIZE, lc_pages * PAGE_SIZE, 0);
421 memset(lc, 0, lc_pages * PAGE_SIZE);
422 lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
423 lc->restart_psw.addr =
424 PSW_ADDR_AMODE | (unsigned long) restart_int_handler;
425 lc->external_new_psw.mask = PSW_KERNEL_BITS;
426 lc->external_new_psw.addr =
427 PSW_ADDR_AMODE | (unsigned long) ext_int_handler;
428 lc->svc_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_IO | PSW_MASK_EXT;
429 lc->svc_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) system_call;
430 lc->program_new_psw.mask = PSW_KERNEL_BITS;
431 lc->program_new_psw.addr =
432 PSW_ADDR_AMODE | (unsigned long)pgm_check_handler;
433 lc->mcck_new_psw.mask =
434 PSW_KERNEL_BITS & ~PSW_MASK_MCHECK & ~PSW_MASK_DAT;
435 lc->mcck_new_psw.addr =
436 PSW_ADDR_AMODE | (unsigned long) mcck_int_handler;
437 lc->io_new_psw.mask = PSW_KERNEL_BITS;
438 lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler;
439 lc->ipl_device = S390_lowcore.ipl_device;
440 lc->jiffy_timer = -1LL;
441 lc->kernel_stack = ((unsigned long) &init_thread_union) + THREAD_SIZE;
442 lc->async_stack = (unsigned long)
443 __alloc_bootmem(ASYNC_SIZE, ASYNC_SIZE, 0) + ASYNC_SIZE;
444 lc->panic_stack = (unsigned long)
445 __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0) + PAGE_SIZE;
446 lc->current_task = (unsigned long) init_thread_union.thread_info.task;
447 lc->thread_info = (unsigned long) &init_thread_union;
449 if (MACHINE_HAS_IEEE) {
450 lc->extended_save_area_addr = (__u32)
451 __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0);
452 /* enable extended save area */
456 set_prefix((u32)(unsigned long) lc);
460 setup_resources(void)
462 struct resource *res;
465 code_resource.start = (unsigned long) &_text;
466 code_resource.end = (unsigned long) &_etext - 1;
467 data_resource.start = (unsigned long) &_etext;
468 data_resource.end = (unsigned long) &_edata - 1;
470 for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) {
471 res = alloc_bootmem_low(sizeof(struct resource));
472 res->flags = IORESOURCE_BUSY | IORESOURCE_MEM;
473 switch (memory_chunk[i].type) {
474 case CHUNK_READ_WRITE:
475 res->name = "System RAM";
477 case CHUNK_READ_ONLY:
478 res->name = "System ROM";
479 res->flags |= IORESOURCE_READONLY;
482 res->name = "reserved";
484 res->start = memory_chunk[i].addr;
485 res->end = memory_chunk[i].addr + memory_chunk[i].size - 1;
486 request_resource(&iomem_resource, res);
487 request_resource(res, &code_resource);
488 request_resource(res, &data_resource);
495 unsigned long bootmap_size;
496 unsigned long start_pfn, end_pfn, init_pfn;
497 unsigned long last_rw_end;
501 * partially used pages are not usable - thus
502 * we are rounding upwards:
504 start_pfn = (__pa(&_end) + PAGE_SIZE - 1) >> PAGE_SHIFT;
505 end_pfn = max_pfn = memory_end >> PAGE_SHIFT;
507 /* Initialize storage key for kernel pages */
508 for (init_pfn = 0 ; init_pfn < start_pfn; init_pfn++)
509 page_set_storage_key(init_pfn << PAGE_SHIFT, PAGE_DEFAULT_KEY);
512 * Initialize the boot-time allocator (with low memory only):
514 bootmap_size = init_bootmem(start_pfn, end_pfn);
517 * Register RAM areas with the bootmem allocator.
519 last_rw_end = start_pfn;
521 for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) {
522 unsigned long start_chunk, end_chunk;
524 if (memory_chunk[i].type != CHUNK_READ_WRITE)
526 start_chunk = (memory_chunk[i].addr + PAGE_SIZE - 1);
527 start_chunk >>= PAGE_SHIFT;
528 end_chunk = (memory_chunk[i].addr + memory_chunk[i].size);
529 end_chunk >>= PAGE_SHIFT;
530 if (start_chunk < start_pfn)
531 start_chunk = start_pfn;
532 if (end_chunk > end_pfn)
534 if (start_chunk < end_chunk) {
535 /* Initialize storage key for RAM pages */
536 for (init_pfn = start_chunk ; init_pfn < end_chunk;
538 page_set_storage_key(init_pfn << PAGE_SHIFT,
540 free_bootmem(start_chunk << PAGE_SHIFT,
541 (end_chunk - start_chunk) << PAGE_SHIFT);
542 if (last_rw_end < start_chunk)
543 add_memory_hole(last_rw_end, start_chunk - 1);
544 last_rw_end = end_chunk;
548 psw_set_key(PAGE_DEFAULT_KEY);
550 if (last_rw_end < end_pfn - 1)
551 add_memory_hole(last_rw_end, end_pfn - 1);
554 * Reserve the bootmem bitmap itself as well. We do this in two
555 * steps (first step was init_bootmem()) because this catches
556 * the (very unlikely) case of us accidentally initializing the
557 * bootmem allocator with an invalid RAM area.
559 reserve_bootmem(start_pfn << PAGE_SHIFT, bootmap_size);
561 #ifdef CONFIG_BLK_DEV_INITRD
563 if (INITRD_START + INITRD_SIZE <= memory_end) {
564 reserve_bootmem(INITRD_START, INITRD_SIZE);
565 initrd_start = INITRD_START;
566 initrd_end = initrd_start + INITRD_SIZE;
568 printk("initrd extends beyond end of memory "
569 "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
570 initrd_start + INITRD_SIZE, memory_end);
571 initrd_start = initrd_end = 0;
578 * Setup function called from init/main.c just after the banner
583 setup_arch(char **cmdline_p)
586 * print what head.S has found out about the machine
589 printk((MACHINE_IS_VM) ?
590 "We are running under VM (31 bit mode)\n" :
591 "We are running native (31 bit mode)\n");
592 printk((MACHINE_HAS_IEEE) ?
593 "This machine has an IEEE fpu\n" :
594 "This machine has no IEEE fpu\n");
595 #else /* CONFIG_64BIT */
596 printk((MACHINE_IS_VM) ?
597 "We are running under VM (64 bit mode)\n" :
598 "We are running native (64 bit mode)\n");
599 #endif /* CONFIG_64BIT */
601 /* Save unparsed command line copy for /proc/cmdline */
602 strlcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
604 *cmdline_p = COMMAND_LINE;
605 *(*cmdline_p + COMMAND_LINE_SIZE - 1) = '\0';
607 ROOT_DEV = Root_RAM0;
609 init_mm.start_code = PAGE_OFFSET;
610 init_mm.end_code = (unsigned long) &_etext;
611 init_mm.end_data = (unsigned long) &_edata;
612 init_mm.brk = (unsigned long) &_end;
614 memory_end = memory_size;
619 memory_end &= ~0x400000UL;
622 * We need some free virtual space to be able to do vmalloc.
623 * On a machine with 2GB memory we make sure that we have at
624 * least 128 MB free space for vmalloc.
626 if (memory_end > 1920*1024*1024)
627 memory_end = 1920*1024*1024;
628 #else /* CONFIG_64BIT */
629 memory_end &= ~0x200000UL;
630 #endif /* CONFIG_64BIT */
637 __cpu_logical_map[0] = S390_lowcore.cpu_data.cpu_addr;
638 smp_setup_cpu_possible_map();
641 * Create kernel page tables and switch to virtual addressing.
645 /* Setup default console */
649 void print_cpu_info(struct cpuinfo_S390 *cpuinfo)
655 "vers=%02X ident=%06X machine=%04X unused=%04X\n",
660 cpuinfo->cpu_id.version,
661 cpuinfo->cpu_id.ident,
662 cpuinfo->cpu_id.machine,
663 cpuinfo->cpu_id.unused);
667 * show_cpuinfo - Get information on one CPU for use by procfs.
670 static int show_cpuinfo(struct seq_file *m, void *v)
672 struct cpuinfo_S390 *cpuinfo;
673 unsigned long n = (unsigned long) v - 1;
677 seq_printf(m, "vendor_id : IBM/S390\n"
678 "# processors : %i\n"
679 "bogomips per cpu: %lu.%02lu\n",
680 num_online_cpus(), loops_per_jiffy/(500000/HZ),
681 (loops_per_jiffy/(5000/HZ))%100);
685 if (smp_processor_id() == n)
686 cpuinfo = &S390_lowcore.cpu_data;
688 cpuinfo = &lowcore_ptr[n]->cpu_data;
690 cpuinfo = &S390_lowcore.cpu_data;
692 seq_printf(m, "processor %li: "
694 "identification = %06X, "
696 n, cpuinfo->cpu_id.version,
697 cpuinfo->cpu_id.ident,
698 cpuinfo->cpu_id.machine);
704 static void *c_start(struct seq_file *m, loff_t *pos)
706 return *pos < NR_CPUS ? (void *)((unsigned long) *pos + 1) : NULL;
708 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
711 return c_start(m, pos);
713 static void c_stop(struct seq_file *m, void *v)
716 struct seq_operations cpuinfo_op = {
720 .show = show_cpuinfo,
723 #define DEFINE_IPL_ATTR(_name, _format, _value) \
724 static ssize_t ipl_##_name##_show(struct subsystem *subsys, \
727 return sprintf(page, _format, _value); \
729 static struct subsys_attribute ipl_##_name##_attr = \
730 __ATTR(_name, S_IRUGO, ipl_##_name##_show, NULL);
732 DEFINE_IPL_ATTR(wwpn, "0x%016llx\n", (unsigned long long)
733 IPL_PARMBLOCK_START->fcp.wwpn);
734 DEFINE_IPL_ATTR(lun, "0x%016llx\n", (unsigned long long)
735 IPL_PARMBLOCK_START->fcp.lun);
736 DEFINE_IPL_ATTR(bootprog, "%lld\n", (unsigned long long)
737 IPL_PARMBLOCK_START->fcp.bootprog);
738 DEFINE_IPL_ATTR(br_lba, "%lld\n", (unsigned long long)
739 IPL_PARMBLOCK_START->fcp.br_lba);
747 static enum ipl_type_type
750 struct ipl_parameter_block *ipl = IPL_PARMBLOCK_START;
752 if (!IPL_DEVNO_VALID)
753 return ipl_type_unknown;
754 if (!IPL_PARMBLOCK_VALID)
756 if (ipl->hdr.header.version > IPL_MAX_SUPPORTED_VERSION)
757 return ipl_type_unknown;
758 if (ipl->fcp.pbt != IPL_TYPE_FCP)
759 return ipl_type_unknown;
764 ipl_type_show(struct subsystem *subsys, char *page)
766 switch (get_ipl_type()) {
768 return sprintf(page, "ccw\n");
770 return sprintf(page, "fcp\n");
772 return sprintf(page, "unknown\n");
776 static struct subsys_attribute ipl_type_attr = __ATTR_RO(ipl_type);
779 ipl_device_show(struct subsystem *subsys, char *page)
781 struct ipl_parameter_block *ipl = IPL_PARMBLOCK_START;
783 switch (get_ipl_type()) {
785 return sprintf(page, "0.0.%04x\n", ipl_devno);
787 return sprintf(page, "0.0.%04x\n", ipl->fcp.devno);
793 static struct subsys_attribute ipl_device_attr =
794 __ATTR(device, S_IRUGO, ipl_device_show, NULL);
796 static struct attribute *ipl_fcp_attrs[] = {
798 &ipl_device_attr.attr,
801 &ipl_bootprog_attr.attr,
802 &ipl_br_lba_attr.attr,
806 static struct attribute_group ipl_fcp_attr_group = {
807 .attrs = ipl_fcp_attrs,
810 static struct attribute *ipl_ccw_attrs[] = {
812 &ipl_device_attr.attr,
816 static struct attribute_group ipl_ccw_attr_group = {
817 .attrs = ipl_ccw_attrs,
820 static struct attribute *ipl_unknown_attrs[] = {
825 static struct attribute_group ipl_unknown_attr_group = {
826 .attrs = ipl_unknown_attrs,
830 ipl_parameter_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
832 unsigned int size = IPL_PARMBLOCK_SIZE;
836 if (off + count > size)
839 memcpy(buf, (void *) IPL_PARMBLOCK_START + off, count);
843 static struct bin_attribute ipl_parameter_attr = {
845 .name = "binary_parameter",
847 .owner = THIS_MODULE,
850 .read = &ipl_parameter_read,
854 ipl_scp_data_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
856 unsigned int size = IPL_PARMBLOCK_START->fcp.scp_data_len;
857 void *scp_data = &IPL_PARMBLOCK_START->fcp.scp_data;
861 if (off + count > size)
864 memcpy(buf, scp_data + off, count);
868 static struct bin_attribute ipl_scp_data_attr = {
872 .owner = THIS_MODULE,
875 .read = &ipl_scp_data_read,
878 static decl_subsys(ipl, NULL, NULL);
881 ipl_device_sysfs_register(void) {
884 rc = firmware_register(&ipl_subsys);
888 switch (get_ipl_type()) {
890 sysfs_create_group(&ipl_subsys.kset.kobj, &ipl_ccw_attr_group);
893 sysfs_create_group(&ipl_subsys.kset.kobj, &ipl_fcp_attr_group);
894 sysfs_create_bin_file(&ipl_subsys.kset.kobj,
895 &ipl_parameter_attr);
896 sysfs_create_bin_file(&ipl_subsys.kset.kobj,
900 sysfs_create_group(&ipl_subsys.kset.kobj,
901 &ipl_unknown_attr_group);
907 __initcall(ipl_device_sysfs_register);