2 * Copyright (c) 2000-2001 Adaptec Inc.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions, and the following disclaimer,
10 * without modification.
11 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
12 * substantially similar to the "NO WARRANTY" disclaimer below
13 * ("Disclaimer") and any redistribution must be conditioned upon
14 * including a substantially similar Disclaimer requirement for further
15 * binary redistribution.
16 * 3. Neither the names of the above-listed copyright holders nor the names
17 * of any contributors may be used to endorse or promote products derived
18 * from this software without specific prior written permission.
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
26 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
27 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
28 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
29 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
30 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
31 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
32 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
33 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
34 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
35 * POSSIBILITY OF SUCH DAMAGES.
37 * String handling code courtesy of Gerard Roudier's <groudier@club-internet.fr>
40 * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic7xxx_proc.c#29 $
42 #include "aic7xxx_osm.h"
43 #include "aic7xxx_inline.h"
44 #include "aic7xxx_93cx6.h"
46 static void copy_mem_info(struct info_str *info, char *data, int len);
47 static int copy_info(struct info_str *info, char *fmt, ...);
48 static void ahc_dump_target_state(struct ahc_softc *ahc,
49 struct info_str *info,
50 u_int our_id, char channel,
51 u_int target_id, u_int target_offset);
52 static void ahc_dump_device_state(struct info_str *info,
53 struct scsi_device *dev);
54 static int ahc_proc_write_seeprom(struct ahc_softc *ahc,
55 char *buffer, int length);
58 copy_mem_info(struct info_str *info, char *data, int len)
60 if (info->pos + len > info->offset + info->length)
61 len = info->offset + info->length - info->pos;
63 if (info->pos + len < info->offset) {
68 if (info->pos < info->offset) {
71 partial = info->offset - info->pos;
78 memcpy(info->buffer, data, len);
85 copy_info(struct info_str *info, char *fmt, ...)
92 len = vsprintf(buf, fmt, args);
95 copy_mem_info(info, buf, len);
100 ahc_format_transinfo(struct info_str *info, struct ahc_transinfo *tinfo)
108 if (tinfo->offset != 0) {
109 freq = aic_calc_syncsrate(tinfo->period);
112 speed *= (0x01 << tinfo->width);
115 copy_info(info, "%d.%03dMB/s transfers", mb, speed % 1000);
117 copy_info(info, "%dKB/s transfers", speed);
120 copy_info(info, " (%d.%03dMHz%s, offset %d",
121 freq / 1000, freq % 1000,
122 (tinfo->ppr_options & MSG_EXT_PPR_DT_REQ) != 0
123 ? " DT" : "", tinfo->offset);
126 if (tinfo->width > 0) {
128 copy_info(info, ", ");
130 copy_info(info, " (");
132 copy_info(info, "%dbit)", 8 * (0x01 << tinfo->width));
133 } else if (freq != 0) {
134 copy_info(info, ")");
136 copy_info(info, "\n");
140 ahc_dump_target_state(struct ahc_softc *ahc, struct info_str *info,
141 u_int our_id, char channel, u_int target_id,
144 struct ahc_linux_target *targ;
145 struct scsi_target *starget;
146 struct ahc_initiator_tinfo *tinfo;
147 struct ahc_tmode_tstate *tstate;
150 tinfo = ahc_fetch_transinfo(ahc, channel, our_id,
152 if ((ahc->features & AHC_TWIN) != 0)
153 copy_info(info, "Channel %c ", channel);
154 copy_info(info, "Target %d Negotiation Settings\n", target_id);
155 copy_info(info, "\tUser: ");
156 ahc_format_transinfo(info, &tinfo->user);
157 starget = ahc->platform_data->starget[target_offset];
158 targ = scsi_transport_target_data(starget);
162 copy_info(info, "\tGoal: ");
163 ahc_format_transinfo(info, &tinfo->goal);
164 copy_info(info, "\tCurr: ");
165 ahc_format_transinfo(info, &tinfo->curr);
167 for (lun = 0; lun < AHC_NUM_LUNS; lun++) {
168 struct scsi_device *sdev;
170 sdev = targ->sdev[lun];
175 ahc_dump_device_state(info, sdev);
180 ahc_dump_device_state(struct info_str *info, struct scsi_device *sdev)
182 struct ahc_linux_device *dev = scsi_transport_device_data(sdev);
184 copy_info(info, "\tChannel %c Target %d Lun %d Settings\n",
185 sdev->sdev_target->channel + 'A',
186 sdev->sdev_target->id, sdev->lun);
188 copy_info(info, "\t\tCommands Queued %ld\n", dev->commands_issued);
189 copy_info(info, "\t\tCommands Active %d\n", dev->active);
190 copy_info(info, "\t\tCommand Openings %d\n", dev->openings);
191 copy_info(info, "\t\tMax Tagged Openings %d\n", dev->maxtags);
192 copy_info(info, "\t\tDevice Queue Frozen Count %d\n", dev->qfrozen);
196 ahc_proc_write_seeprom(struct ahc_softc *ahc, char *buffer, int length)
198 struct seeprom_descriptor sd;
204 /* Default to failure. */
207 paused = ahc_is_paused(ahc);
211 if (length != sizeof(struct seeprom_config)) {
212 printf("ahc_proc_write_seeprom: incorrect buffer size\n");
216 have_seeprom = ahc_verify_cksum((struct seeprom_config*)buffer);
217 if (have_seeprom == 0) {
218 printf("ahc_proc_write_seeprom: cksum verification failed\n");
223 #if AHC_PCI_CONFIG > 0
224 if ((ahc->chip & AHC_PCI) != 0) {
225 sd.sd_control_offset = SEECTL;
226 sd.sd_status_offset = SEECTL;
227 sd.sd_dataout_offset = SEECTL;
228 if (ahc->flags & AHC_LARGE_SEEPROM)
238 have_seeprom = ahc_acquire_seeprom(ahc, &sd);
241 if ((ahc->chip & AHC_VL) != 0) {
242 sd.sd_control_offset = SEECTL_2840;
243 sd.sd_status_offset = STATUS_2840;
244 sd.sd_dataout_offset = STATUS_2840;
247 sd.sd_RDY = EEPROM_TF;
254 printf("ahc_proc_write_seeprom: unsupported adapter type\n");
259 printf("ahc_proc_write_seeprom: No Serial EEPROM\n");
264 if (ahc->seep_config == NULL) {
265 ahc->seep_config = malloc(sizeof(*ahc->seep_config),
267 if (ahc->seep_config == NULL) {
268 printf("aic7xxx: Unable to allocate serial "
269 "eeprom buffer. Write failing\n");
273 printf("aic7xxx: Writing Serial EEPROM\n");
274 start_addr = 32 * (ahc->channel - 'A');
275 ahc_write_seeprom(&sd, (u_int16_t *)buffer, start_addr,
276 sizeof(struct seeprom_config)/2);
277 ahc_read_seeprom(&sd, (uint16_t *)ahc->seep_config,
278 start_addr, sizeof(struct seeprom_config)/2);
279 #if AHC_PCI_CONFIG > 0
280 if ((ahc->chip & AHC_VL) == 0)
281 ahc_release_seeprom(&sd);
294 * Return information to handle /proc support for the driver.
297 ahc_linux_proc_info(struct Scsi_Host *shost, char *buffer, char **start,
298 off_t offset, int length, int inout)
300 struct ahc_softc *ahc = *(struct ahc_softc **)shost->hostdata;
301 struct info_str info;
307 /* Has data been written to the file? */
309 retval = ahc_proc_write_seeprom(ahc, buffer, length);
316 info.buffer = buffer;
317 info.length = length;
318 info.offset = offset;
321 copy_info(&info, "Adaptec AIC7xxx driver version: %s\n",
322 AIC7XXX_DRIVER_VERSION);
323 copy_info(&info, "%s\n", ahc->description);
324 ahc_controller_info(ahc, ahc_info);
325 copy_info(&info, "%s\n", ahc_info);
326 copy_info(&info, "Allocated SCBs: %d, SG List Length: %d\n\n",
327 ahc->scb_data->numscbs, AHC_NSEG);
330 if (ahc->seep_config == NULL)
331 copy_info(&info, "No Serial EEPROM\n");
333 copy_info(&info, "Serial EEPROM:\n");
334 for (i = 0; i < sizeof(*ahc->seep_config)/2; i++) {
335 if (((i % 8) == 0) && (i != 0)) {
336 copy_info(&info, "\n");
338 copy_info(&info, "0x%.4x ",
339 ((uint16_t*)ahc->seep_config)[i]);
341 copy_info(&info, "\n");
343 copy_info(&info, "\n");
346 if ((ahc->features & (AHC_WIDE|AHC_TWIN)) == 0)
349 for (i = 0; i <= max_targ; i++) {
355 our_id = ahc->our_id;
357 if (i > 7 && (ahc->features & AHC_TWIN) != 0) {
359 our_id = ahc->our_id_b;
363 ahc_dump_target_state(ahc, &info, our_id,
364 channel, target_id, i);
366 retval = info.pos > info.offset ? info.pos - info.offset : 0;