git.oblomov.eu Git - linux-2.6/blob - drivers/media/video/saa7115.c

   1 /* saa711x - Philips SAA711x video decoder driver
   2  * This driver can work with saa7111, saa7111a, saa7113, saa7114,
   3  *                           saa7115 and saa7118.
   4  *
   5  * Based on saa7114 driver by Maxim Yevtyushkin, which is based on
   6  * the saa7111 driver by Dave Perks.
   7  *
   8  * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
   9  * Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com>
  10  *
  11  * Slight changes for video timing and attachment output by
  12  * Wolfgang Scherr <scherr@net4you.net>
  13  *
  14  * Moved over to the linux >= 2.4.x i2c protocol (1/1/2003)
  15  * by Ronald Bultje <rbultje@ronald.bitfreak.net>
  16  *
  17  * Added saa7115 support by Kevin Thayer <nufan_wfk at yahoo.com>
  18  * (2/17/2003)
  19  *
  20  * VBI support (2004) and cleanups (2005) by Hans Verkuil <hverkuil@xs4all.nl>
  21  *
  22  * Copyright (c) 2005-2006 Mauro Carvalho Chehab <mchehab@infradead.org>
  23  *      SAA7111, SAA7113 and SAA7118 support
  24  *
  25  * This program is free software; you can redistribute it and/or
  26  * modify it under the terms of the GNU General Public License
  27  * as published by the Free Software Foundation; either version 2
  28  * of the License, or (at your option) any later version.
  29  *
  30  * This program is distributed in the hope that it will be useful,
  31  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  32  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  33  * GNU General Public License for more details.
  34  *
  35  * You should have received a copy of the GNU General Public License
  36  * along with this program; if not, write to the Free Software
  37  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  38  */
  39
  40 #include "saa711x_regs.h"
  41
  42 #include <linux/kernel.h>
  43 #include <linux/module.h>
  44 #include <linux/slab.h>
  45 #include <linux/i2c.h>
  46 #include <linux/videodev2.h>
  47 #include <media/v4l2-common.h>
  48 #include <media/v4l2-chip-ident.h>
  49 #include <media/v4l2-i2c-drv-legacy.h>
  50 #include <media/saa7115.h>
  51 #include <asm/div64.h>
  52
  53 #define VRES_60HZ       (480+16)
  54
  55 MODULE_DESCRIPTION("Philips SAA7111/SAA7113/SAA7114/SAA7115/SAA7118 video decoder driver");
  56 MODULE_AUTHOR(  "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, "
  57                 "Hans Verkuil, Mauro Carvalho Chehab");
  58 MODULE_LICENSE("GPL");
  59
  60 static int debug;
  61 module_param(debug, bool, 0644);
  62
  63 MODULE_PARM_DESC(debug, "Debug level (0-1)");
  64
  65 static unsigned short normal_i2c[] = {
  66                 0x4a >> 1, 0x48 >> 1,   /* SAA7111, SAA7111A and SAA7113 */
  67                 0x42 >> 1, 0x40 >> 1,   /* SAA7114, SAA7115 and SAA7118 */
  68                 I2C_CLIENT_END };
  69
  70 I2C_CLIENT_INSMOD;
  71
  72 struct saa711x_state {
  73         v4l2_std_id std;
  74         int input;
  75         int output;
  76         int enable;
  77         int radio;
  78         int bright;
  79         int contrast;
  80         int hue;
  81         int sat;
  82         int width;
  83         int height;
  84         u32 ident;
  85         u32 audclk_freq;
  86         u32 crystal_freq;
  87         u8 ucgc;
  88         u8 cgcdiv;
  89         u8 apll;
  90 };
  91
  92 /* ----------------------------------------------------------------------- */
  93
  94 static inline int saa711x_write(struct i2c_client *client, u8 reg, u8 value)
  95 {
  96         return i2c_smbus_write_byte_data(client, reg, value);
  97 }
  98
  99 /* Sanity routine to check if a register is present */
 100 static int saa711x_has_reg(const int id, const u8 reg)
 101 {
 102         if (id == V4L2_IDENT_SAA7111)
 103                 return reg < 0x20 && reg != 0x01 && reg != 0x0f &&
 104                        (reg < 0x13 || reg > 0x19) && reg != 0x1d && reg != 0x1e;
 105
 106         /* common for saa7113/4/5/8 */
 107         if (unlikely((reg >= 0x3b && reg <= 0x3f) || reg == 0x5c || reg == 0x5f ||
 108             reg == 0xa3 || reg == 0xa7 || reg == 0xab || reg == 0xaf || (reg >= 0xb5 && reg <= 0xb7) ||
 109             reg == 0xd3 || reg == 0xd7 || reg == 0xdb || reg == 0xdf || (reg >= 0xe5 && reg <= 0xe7) ||
 110             reg == 0x82 || (reg >= 0x89 && reg <= 0x8e)))
 111                 return 0;
 112
 113         switch (id) {
 114         case V4L2_IDENT_SAA7113:
 115                 return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && (reg < 0x20 || reg > 0x3f) &&
 116                        reg != 0x5d && reg < 0x63;
 117         case V4L2_IDENT_SAA7114:
 118                 return (reg < 0x1a || reg > 0x1e) && (reg < 0x20 || reg > 0x2f) &&
 119                        (reg < 0x63 || reg > 0x7f) && reg != 0x33 && reg != 0x37 &&
 120                        reg != 0x81 && reg < 0xf0;
 121         case V4L2_IDENT_SAA7115:
 122                 return (reg < 0x20 || reg > 0x2f) && reg != 0x65 && (reg < 0xfc || reg > 0xfe);
 123         case V4L2_IDENT_SAA7118:
 124                 return (reg < 0x1a || reg > 0x1d) && (reg < 0x20 || reg > 0x22) &&
 125                        (reg < 0x26 || reg > 0x28) && reg != 0x33 && reg != 0x37 &&
 126                        (reg < 0x63 || reg > 0x7f) && reg != 0x81 && reg < 0xf0;
 127         }
 128         return 1;
 129 }
 130
 131 static int saa711x_writeregs(struct i2c_client *client, const unsigned char *regs)
 132 {
 133         struct saa711x_state *state = i2c_get_clientdata(client);
 134         unsigned char reg, data;
 135
 136         while (*regs != 0x00) {
 137                 reg = *(regs++);
 138                 data = *(regs++);
 139
 140                 /* According with datasheets, reserved regs should be
 141                    filled with 0 - seems better not to touch on they */
 142                 if (saa711x_has_reg(state->ident,reg)) {
 143                         if (saa711x_write(client, reg, data) < 0)
 144                                 return -1;
 145                 } else {
 146                         v4l_dbg(1, debug, client, "tried to access reserved reg 0x%02x\n", reg);
 147                 }
 148         }
 149         return 0;
 150 }
 151
 152 static inline int saa711x_read(struct i2c_client *client, u8 reg)
 153 {
 154         return i2c_smbus_read_byte_data(client, reg);
 155 }
 156
 157 /* ----------------------------------------------------------------------- */
 158
 159 /* SAA7111 initialization table */
 160 static const unsigned char saa7111_init[] = {
 161         R_01_INC_DELAY, 0x00,           /* reserved */
 162
 163         /*front end */
 164         R_02_INPUT_CNTL_1, 0xd0,        /* FUSE=3, GUDL=2, MODE=0 */
 165         R_03_INPUT_CNTL_2, 0x23,        /* HLNRS=0, VBSL=1, WPOFF=0, HOLDG=0,
 166                                          * GAFIX=0, GAI1=256, GAI2=256 */
 167         R_04_INPUT_CNTL_3, 0x00,        /* GAI1=256 */
 168         R_05_INPUT_CNTL_4, 0x00,        /* GAI2=256 */
 169
 170         /* decoder */
 171         R_06_H_SYNC_START, 0xf3,        /* HSB at  13(50Hz) /  17(60Hz)
 172                                          * pixels after end of last line */
 173         R_07_H_SYNC_STOP, 0xe8,         /* HSS seems to be needed to
 174                                          * work with NTSC, too */
 175         R_08_SYNC_CNTL, 0xc8,           /* AUFD=1, FSEL=1, EXFIL=0,
 176                                          * VTRC=1, HPLL=0, VNOI=0 */
 177         R_09_LUMA_CNTL, 0x01,           /* BYPS=0, PREF=0, BPSS=0,
 178                                          * VBLB=0, UPTCV=0, APER=1 */
 179         R_0A_LUMA_BRIGHT_CNTL, 0x80,
 180         R_0B_LUMA_CONTRAST_CNTL, 0x47,  /* 0b - CONT=1.109 */
 181         R_0C_CHROMA_SAT_CNTL, 0x40,
 182         R_0D_CHROMA_HUE_CNTL, 0x00,
 183         R_0E_CHROMA_CNTL_1, 0x01,       /* 0e - CDTO=0, CSTD=0, DCCF=0,
 184                                          * FCTC=0, CHBW=1 */
 185         R_0F_CHROMA_GAIN_CNTL, 0x00,    /* reserved */
 186         R_10_CHROMA_CNTL_2, 0x48,       /* 10 - OFTS=1, HDEL=0, VRLN=1, YDEL=0 */
 187         R_11_MODE_DELAY_CNTL, 0x1c,     /* 11 - GPSW=0, CM99=0, FECO=0, COMPO=1,
 188                                          * OEYC=1, OEHV=1, VIPB=0, COLO=0 */
 189         R_12_RT_SIGNAL_CNTL, 0x00,      /* 12 - output control 2 */
 190         R_13_RT_X_PORT_OUT_CNTL, 0x00,  /* 13 - output control 3 */
 191         R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
 192         R_15_VGATE_START_FID_CHG, 0x00,
 193         R_16_VGATE_STOP, 0x00,
 194         R_17_MISC_VGATE_CONF_AND_MSB, 0x00,
 195
 196         0x00, 0x00
 197 };
 198
 199 /* SAA7113 init codes */
 200 static const unsigned char saa7113_init[] = {
 201         R_01_INC_DELAY, 0x08,
 202         R_02_INPUT_CNTL_1, 0xc2,
 203         R_03_INPUT_CNTL_2, 0x30,
 204         R_04_INPUT_CNTL_3, 0x00,
 205         R_05_INPUT_CNTL_4, 0x00,
 206         R_06_H_SYNC_START, 0x89,
 207         R_07_H_SYNC_STOP, 0x0d,
 208         R_08_SYNC_CNTL, 0x88,
 209         R_09_LUMA_CNTL, 0x01,
 210         R_0A_LUMA_BRIGHT_CNTL, 0x80,
 211         R_0B_LUMA_CONTRAST_CNTL, 0x47,
 212         R_0C_CHROMA_SAT_CNTL, 0x40,
 213         R_0D_CHROMA_HUE_CNTL, 0x00,
 214         R_0E_CHROMA_CNTL_1, 0x01,
 215         R_0F_CHROMA_GAIN_CNTL, 0x2a,
 216         R_10_CHROMA_CNTL_2, 0x08,
 217         R_11_MODE_DELAY_CNTL, 0x0c,
 218         R_12_RT_SIGNAL_CNTL, 0x07,
 219         R_13_RT_X_PORT_OUT_CNTL, 0x00,
 220         R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
 221         R_15_VGATE_START_FID_CHG, 0x00,
 222         R_16_VGATE_STOP, 0x00,
 223         R_17_MISC_VGATE_CONF_AND_MSB, 0x00,
 224
 225         0x00, 0x00
 226 };
 227
 228 /* If a value differs from the Hauppauge driver values, then the comment starts with
 229    'was 0xXX' to denote the Hauppauge value. Otherwise the value is identical to what the
 230    Hauppauge driver sets. */
 231
 232 /* SAA7114 and SAA7115 initialization table */
 233 static const unsigned char saa7115_init_auto_input[] = {
 234                 /* Front-End Part */
 235         R_01_INC_DELAY, 0x48,                   /* white peak control disabled */
 236         R_03_INPUT_CNTL_2, 0x20,                /* was 0x30. 0x20: long vertical blanking */
 237         R_04_INPUT_CNTL_3, 0x90,                /* analog gain set to 0 */
 238         R_05_INPUT_CNTL_4, 0x90,                /* analog gain set to 0 */
 239                 /* Decoder Part */
 240         R_06_H_SYNC_START, 0xeb,                /* horiz sync begin = -21 */
 241         R_07_H_SYNC_STOP, 0xe0,                 /* horiz sync stop = -17 */
 242         R_09_LUMA_CNTL, 0x53,                   /* 0x53, was 0x56 for 60hz. luminance control */
 243         R_0A_LUMA_BRIGHT_CNTL, 0x80,            /* was 0x88. decoder brightness, 0x80 is itu standard */
 244         R_0B_LUMA_CONTRAST_CNTL, 0x44,          /* was 0x48. decoder contrast, 0x44 is itu standard */
 245         R_0C_CHROMA_SAT_CNTL, 0x40,             /* was 0x47. decoder saturation, 0x40 is itu standard */
 246         R_0D_CHROMA_HUE_CNTL, 0x00,
 247         R_0F_CHROMA_GAIN_CNTL, 0x00,            /* use automatic gain  */
 248         R_10_CHROMA_CNTL_2, 0x06,               /* chroma: active adaptive combfilter */
 249         R_11_MODE_DELAY_CNTL, 0x00,
 250         R_12_RT_SIGNAL_CNTL, 0x9d,              /* RTS0 output control: VGATE */
 251         R_13_RT_X_PORT_OUT_CNTL, 0x80,          /* ITU656 standard mode, RTCO output enable RTCE */
 252         R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
 253         R_18_RAW_DATA_GAIN_CNTL, 0x40,          /* gain 0x00 = nominal */
 254         R_19_RAW_DATA_OFF_CNTL, 0x80,
 255         R_1A_COLOR_KILL_LVL_CNTL, 0x77,         /* recommended value */
 256         R_1B_MISC_TVVCRDET, 0x42,               /* recommended value */
 257         R_1C_ENHAN_COMB_CTRL1, 0xa9,            /* recommended value */
 258         R_1D_ENHAN_COMB_CTRL2, 0x01,            /* recommended value */
 259
 260
 261         R_80_GLOBAL_CNTL_1, 0x0,                /* No tasks enabled at init */
 262
 263                 /* Power Device Control */
 264         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,    /* reset device */
 265         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,    /* set device programmed, all in operational mode */
 266         0x00, 0x00
 267 };
 268
 269 /* Used to reset saa7113, saa7114 and saa7115 */
 270 static const unsigned char saa7115_cfg_reset_scaler[] = {
 271         R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x00,    /* disable I-port output */
 272         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,            /* reset scaler */
 273         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,            /* activate scaler */
 274         R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01,    /* enable I-port output */
 275         0x00, 0x00
 276 };
 277
 278 /* ============== SAA7715 VIDEO templates =============  */
 279
 280 static const unsigned char saa7115_cfg_60hz_video[] = {
 281         R_80_GLOBAL_CNTL_1, 0x00,                       /* reset tasks */
 282         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,            /* reset scaler */
 283
 284         R_15_VGATE_START_FID_CHG, 0x03,
 285         R_16_VGATE_STOP, 0x11,
 286         R_17_MISC_VGATE_CONF_AND_MSB, 0x9c,
 287
 288         R_08_SYNC_CNTL, 0x68,                   /* 0xBO: auto detection, 0x68 = NTSC */
 289         R_0E_CHROMA_CNTL_1, 0x07,               /* video autodetection is on */
 290
 291         R_5A_V_OFF_FOR_SLICER, 0x06,            /* standard 60hz value for ITU656 line counting */
 292
 293         /* Task A */
 294         R_90_A_TASK_HANDLING_CNTL, 0x80,
 295         R_91_A_X_PORT_FORMATS_AND_CONF, 0x48,
 296         R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40,
 297         R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84,
 298
 299         /* hoffset low (input), 0x0002 is minimum */
 300         R_94_A_HORIZ_INPUT_WINDOW_START, 0x01,
 301         R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
 302
 303         /* hsize low (input), 0x02d0 = 720 */
 304         R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
 305         R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
 306
 307         R_98_A_VERT_INPUT_WINDOW_START, 0x05,
 308         R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00,
 309
 310         R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x0c,
 311         R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00,
 312
 313         R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0,
 314         R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05,
 315
 316         R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x0c,
 317         R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00,
 318
 319         /* Task B */
 320         R_C0_B_TASK_HANDLING_CNTL, 0x00,
 321         R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08,
 322         R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00,
 323         R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80,
 324
 325         /* 0x0002 is minimum */
 326         R_C4_B_HORIZ_INPUT_WINDOW_START, 0x02,
 327         R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
 328
 329         /* 0x02d0 = 720 */
 330         R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
 331         R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
 332
 333         /* vwindow start 0x12 = 18 */
 334         R_C8_B_VERT_INPUT_WINDOW_START, 0x12,
 335         R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00,
 336
 337         /* vwindow length 0xf8 = 248 */
 338         R_CA_B_VERT_INPUT_WINDOW_LENGTH, VRES_60HZ>>1,
 339         R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, VRES_60HZ>>9,
 340
 341         /* hwindow 0x02d0 = 720 */
 342         R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0,
 343         R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02,
 344
 345         R_F0_LFCO_PER_LINE, 0xad,               /* Set PLL Register. 60hz 525 lines per frame, 27 MHz */
 346         R_F1_P_I_PARAM_SELECT, 0x05,            /* low bit with 0xF0 */
 347         R_F5_PULSGEN_LINE_LENGTH, 0xad,
 348         R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01,
 349
 350         0x00, 0x00
 351 };
 352
 353 static const unsigned char saa7115_cfg_50hz_video[] = {
 354         R_80_GLOBAL_CNTL_1, 0x00,
 355         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,    /* reset scaler */
 356
 357         R_15_VGATE_START_FID_CHG, 0x37,         /* VGATE start */
 358         R_16_VGATE_STOP, 0x16,
 359         R_17_MISC_VGATE_CONF_AND_MSB, 0x99,
 360
 361         R_08_SYNC_CNTL, 0x28,                   /* 0x28 = PAL */
 362         R_0E_CHROMA_CNTL_1, 0x07,
 363
 364         R_5A_V_OFF_FOR_SLICER, 0x03,            /* standard 50hz value */
 365
 366         /* Task A */
 367         R_90_A_TASK_HANDLING_CNTL, 0x81,
 368         R_91_A_X_PORT_FORMATS_AND_CONF, 0x48,
 369         R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40,
 370         R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84,
 371
 372         /* This is weird: the datasheet says that you should use 2 as the minimum value, */
 373         /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */
 374         /* hoffset low (input), 0x0002 is minimum */
 375         R_94_A_HORIZ_INPUT_WINDOW_START, 0x00,
 376         R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
 377
 378         /* hsize low (input), 0x02d0 = 720 */
 379         R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
 380         R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
 381
 382         R_98_A_VERT_INPUT_WINDOW_START, 0x03,
 383         R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00,
 384
 385         /* vsize 0x12 = 18 */
 386         R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x12,
 387         R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00,
 388
 389         /* hsize 0x05a0 = 1440 */
 390         R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0,
 391         R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05,    /* hsize hi (output) */
 392         R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x12,         /* vsize low (output), 0x12 = 18 */
 393         R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00,     /* vsize hi (output) */
 394
 395         /* Task B */
 396         R_C0_B_TASK_HANDLING_CNTL, 0x00,
 397         R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08,
 398         R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00,
 399         R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80,
 400
 401         /* This is weird: the datasheet says that you should use 2 as the minimum value, */
 402         /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */
 403         /* hoffset low (input), 0x0002 is minimum. See comment above. */
 404         R_C4_B_HORIZ_INPUT_WINDOW_START, 0x00,
 405         R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
 406
 407         /* hsize 0x02d0 = 720 */
 408         R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
 409         R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
 410
 411         /* voffset 0x16 = 22 */
 412         R_C8_B_VERT_INPUT_WINDOW_START, 0x16,
 413         R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00,
 414
 415         /* vsize 0x0120 = 288 */
 416         R_CA_B_VERT_INPUT_WINDOW_LENGTH, 0x20,
 417         R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, 0x01,
 418
 419         /* hsize 0x02d0 = 720 */
 420         R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0,
 421         R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02,
 422
 423         R_F0_LFCO_PER_LINE, 0xb0,               /* Set PLL Register. 50hz 625 lines per frame, 27 MHz */
 424         R_F1_P_I_PARAM_SELECT, 0x05,            /* low bit with 0xF0, (was 0x05) */
 425         R_F5_PULSGEN_LINE_LENGTH, 0xb0,
 426         R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01,
 427
 428         0x00, 0x00
 429 };
 430
 431 /* ============== SAA7715 VIDEO templates (end) =======  */
 432
 433 static const unsigned char saa7115_cfg_vbi_on[] = {
 434         R_80_GLOBAL_CNTL_1, 0x00,                       /* reset tasks */
 435         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,            /* reset scaler */
 436         R_80_GLOBAL_CNTL_1, 0x30,                       /* Activate both tasks */
 437         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,            /* activate scaler */
 438         R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01,    /* Enable I-port output */
 439
 440         0x00, 0x00
 441 };
 442
 443 static const unsigned char saa7115_cfg_vbi_off[] = {
 444         R_80_GLOBAL_CNTL_1, 0x00,                       /* reset tasks */
 445         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,            /* reset scaler */
 446         R_80_GLOBAL_CNTL_1, 0x20,                       /* Activate only task "B" */
 447         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,            /* activate scaler */
 448         R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01,    /* Enable I-port output */
 449
 450         0x00, 0x00
 451 };
 452
 453
 454 static const unsigned char saa7115_init_misc[] = {
 455         R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F, 0x01,
 456         R_83_X_PORT_I_O_ENA_AND_OUT_CLK, 0x01,
 457         R_84_I_PORT_SIGNAL_DEF, 0x20,
 458         R_85_I_PORT_SIGNAL_POLAR, 0x21,
 459         R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT, 0xc5,
 460         R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01,
 461
 462         /* Task A */
 463         R_A0_A_HORIZ_PRESCALING, 0x01,
 464         R_A1_A_ACCUMULATION_LENGTH, 0x00,
 465         R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00,
 466
 467         /* Configure controls at nominal value*/
 468         R_A4_A_LUMA_BRIGHTNESS_CNTL, 0x80,
 469         R_A5_A_LUMA_CONTRAST_CNTL, 0x40,
 470         R_A6_A_CHROMA_SATURATION_CNTL, 0x40,
 471
 472         /* note: 2 x zoom ensures that VBI lines have same length as video lines. */
 473         R_A8_A_HORIZ_LUMA_SCALING_INC, 0x00,
 474         R_A9_A_HORIZ_LUMA_SCALING_INC_MSB, 0x02,
 475
 476         R_AA_A_HORIZ_LUMA_PHASE_OFF, 0x00,
 477
 478         /* must be horiz lum scaling / 2 */
 479         R_AC_A_HORIZ_CHROMA_SCALING_INC, 0x00,
 480         R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB, 0x01,
 481
 482         /* must be offset luma / 2 */
 483         R_AE_A_HORIZ_CHROMA_PHASE_OFF, 0x00,
 484
 485         R_B0_A_VERT_LUMA_SCALING_INC, 0x00,
 486         R_B1_A_VERT_LUMA_SCALING_INC_MSB, 0x04,
 487
 488         R_B2_A_VERT_CHROMA_SCALING_INC, 0x00,
 489         R_B3_A_VERT_CHROMA_SCALING_INC_MSB, 0x04,
 490
 491         R_B4_A_VERT_SCALING_MODE_CNTL, 0x01,
 492
 493         R_B8_A_VERT_CHROMA_PHASE_OFF_00, 0x00,
 494         R_B9_A_VERT_CHROMA_PHASE_OFF_01, 0x00,
 495         R_BA_A_VERT_CHROMA_PHASE_OFF_10, 0x00,
 496         R_BB_A_VERT_CHROMA_PHASE_OFF_11, 0x00,
 497
 498         R_BC_A_VERT_LUMA_PHASE_OFF_00, 0x00,
 499         R_BD_A_VERT_LUMA_PHASE_OFF_01, 0x00,
 500         R_BE_A_VERT_LUMA_PHASE_OFF_10, 0x00,
 501         R_BF_A_VERT_LUMA_PHASE_OFF_11, 0x00,
 502
 503         /* Task B */
 504         R_D0_B_HORIZ_PRESCALING, 0x01,
 505         R_D1_B_ACCUMULATION_LENGTH, 0x00,
 506         R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00,
 507
 508         /* Configure controls at nominal value*/
 509         R_D4_B_LUMA_BRIGHTNESS_CNTL, 0x80,
 510         R_D5_B_LUMA_CONTRAST_CNTL, 0x40,
 511         R_D6_B_CHROMA_SATURATION_CNTL, 0x40,
 512
 513         /* hor lum scaling 0x0400 = 1 */
 514         R_D8_B_HORIZ_LUMA_SCALING_INC, 0x00,
 515         R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, 0x04,
 516
 517         R_DA_B_HORIZ_LUMA_PHASE_OFF, 0x00,
 518
 519         /* must be hor lum scaling / 2 */
 520         R_DC_B_HORIZ_CHROMA_SCALING, 0x00,
 521         R_DD_B_HORIZ_CHROMA_SCALING_MSB, 0x02,
 522
 523         /* must be offset luma / 2 */
 524         R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA, 0x00,
 525
 526         R_E0_B_VERT_LUMA_SCALING_INC, 0x00,
 527         R_E1_B_VERT_LUMA_SCALING_INC_MSB, 0x04,
 528
 529         R_E2_B_VERT_CHROMA_SCALING_INC, 0x00,
 530         R_E3_B_VERT_CHROMA_SCALING_INC_MSB, 0x04,
 531
 532         R_E4_B_VERT_SCALING_MODE_CNTL, 0x01,
 533
 534         R_E8_B_VERT_CHROMA_PHASE_OFF_00, 0x00,
 535         R_E9_B_VERT_CHROMA_PHASE_OFF_01, 0x00,
 536         R_EA_B_VERT_CHROMA_PHASE_OFF_10, 0x00,
 537         R_EB_B_VERT_CHROMA_PHASE_OFF_11, 0x00,
 538
 539         R_EC_B_VERT_LUMA_PHASE_OFF_00, 0x00,
 540         R_ED_B_VERT_LUMA_PHASE_OFF_01, 0x00,
 541         R_EE_B_VERT_LUMA_PHASE_OFF_10, 0x00,
 542         R_EF_B_VERT_LUMA_PHASE_OFF_11, 0x00,
 543
 544         R_F2_NOMINAL_PLL2_DTO, 0x50,            /* crystal clock = 24.576 MHz, target = 27MHz */
 545         R_F3_PLL_INCREMENT, 0x46,
 546         R_F4_PLL2_STATUS, 0x00,
 547         R_F7_PULSE_A_POS_MSB, 0x4b,             /* not the recommended settings! */
 548         R_F8_PULSE_B_POS, 0x00,
 549         R_F9_PULSE_B_POS_MSB, 0x4b,
 550         R_FA_PULSE_C_POS, 0x00,
 551         R_FB_PULSE_C_POS_MSB, 0x4b,
 552
 553         /* PLL2 lock detection settings: 71 lines 50% phase error */
 554         R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES, 0x88,
 555
 556         /* Turn off VBI */
 557         R_40_SLICER_CNTL_1, 0x20,             /* No framing code errors allowed. */
 558         R_41_LCR_BASE, 0xff,
 559         R_41_LCR_BASE+1, 0xff,
 560         R_41_LCR_BASE+2, 0xff,
 561         R_41_LCR_BASE+3, 0xff,
 562         R_41_LCR_BASE+4, 0xff,
 563         R_41_LCR_BASE+5, 0xff,
 564         R_41_LCR_BASE+6, 0xff,
 565         R_41_LCR_BASE+7, 0xff,
 566         R_41_LCR_BASE+8, 0xff,
 567         R_41_LCR_BASE+9, 0xff,
 568         R_41_LCR_BASE+10, 0xff,
 569         R_41_LCR_BASE+11, 0xff,
 570         R_41_LCR_BASE+12, 0xff,
 571         R_41_LCR_BASE+13, 0xff,
 572         R_41_LCR_BASE+14, 0xff,
 573         R_41_LCR_BASE+15, 0xff,
 574         R_41_LCR_BASE+16, 0xff,
 575         R_41_LCR_BASE+17, 0xff,
 576         R_41_LCR_BASE+18, 0xff,
 577         R_41_LCR_BASE+19, 0xff,
 578         R_41_LCR_BASE+20, 0xff,
 579         R_41_LCR_BASE+21, 0xff,
 580         R_41_LCR_BASE+22, 0xff,
 581         R_58_PROGRAM_FRAMING_CODE, 0x40,
 582         R_59_H_OFF_FOR_SLICER, 0x47,
 583         R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF, 0x83,
 584         R_5D_DID, 0xbd,
 585         R_5E_SDID, 0x35,
 586
 587         R_02_INPUT_CNTL_1, 0x84,                /* input tuner -> input 4, amplifier active */
 588
 589         R_80_GLOBAL_CNTL_1, 0x20,               /* enable task B */
 590         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,
 591         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,
 592         0x00, 0x00
 593 };
 594
 595 static int saa711x_odd_parity(u8 c)
 596 {
 597         c ^= (c >> 4);
 598         c ^= (c >> 2);
 599         c ^= (c >> 1);
 600
 601         return c & 1;
 602 }
 603
 604 static int saa711x_decode_vps(u8 * dst, u8 * p)
 605 {
 606         static const u8 biphase_tbl[] = {
 607                 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
 608                 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
 609                 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
 610                 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
 611                 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
 612                 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
 613                 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
 614                 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
 615                 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
 616                 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
 617                 0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87,
 618                 0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3,
 619                 0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85,
 620                 0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1,
 621                 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
 622                 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
 623                 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
 624                 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
 625                 0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86,
 626                 0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2,
 627                 0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84,
 628                 0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0,
 629                 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
 630                 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
 631                 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
 632                 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
 633                 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
 634                 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
 635                 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
 636                 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
 637                 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
 638                 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
 639         };
 640         int i;
 641         u8 c, err = 0;
 642
 643         for (i = 0; i < 2 * 13; i += 2) {
 644                 err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]];
 645                 c = (biphase_tbl[p[i + 1]] & 0xf) | ((biphase_tbl[p[i]] & 0xf) << 4);
 646                 dst[i / 2] = c;
 647         }
 648         return err & 0xf0;
 649 }
 650
 651 static int saa711x_decode_wss(u8 * p)
 652 {
 653         static const int wss_bits[8] = {
 654                 0, 0, 0, 1, 0, 1, 1, 1
 655         };
 656         unsigned char parity;
 657         int wss = 0;
 658         int i;
 659
 660         for (i = 0; i < 16; i++) {
 661                 int b1 = wss_bits[p[i] & 7];
 662                 int b2 = wss_bits[(p[i] >> 3) & 7];
 663
 664                 if (b1 == b2)
 665                         return -1;
 666                 wss |= b2 << i;
 667         }
 668         parity = wss & 15;
 669         parity ^= parity >> 2;
 670         parity ^= parity >> 1;
 671
 672         if (!(parity & 1))
 673                 return -1;
 674
 675         return wss;
 676 }
 677
 678 static int saa711x_set_audio_clock_freq(struct i2c_client *client, u32 freq)
 679 {
 680         struct saa711x_state *state = i2c_get_clientdata(client);
 681         u32 acpf;
 682         u32 acni;
 683         u32 hz;
 684         u64 f;
 685         u8 acc = 0;     /* reg 0x3a, audio clock control */
 686
 687         /* Checks for chips that don't have audio clock (saa7111, saa7113) */
 688         if (!saa711x_has_reg(state->ident,R_30_AUD_MAST_CLK_CYCLES_PER_FIELD))
 689                 return 0;
 690
 691         v4l_dbg(1, debug, client, "set audio clock freq: %d\n", freq);
 692
 693         /* sanity check */
 694         if (freq < 32000 || freq > 48000)
 695                 return -EINVAL;
 696
 697         /* hz is the refresh rate times 100 */
 698         hz = (state->std & V4L2_STD_525_60) ? 5994 : 5000;
 699         /* acpf = (256 * freq) / field_frequency == (256 * 100 * freq) / hz */
 700         acpf = (25600 * freq) / hz;
 701         /* acni = (256 * freq * 2^23) / crystal_frequency =
 702                   (freq * 2^(8+23)) / crystal_frequency =
 703                   (freq << 31) / crystal_frequency */
 704         f = freq;
 705         f = f << 31;
 706         do_div(f, state->crystal_freq);
 707         acni = f;
 708         if (state->ucgc) {
 709                 acpf = acpf * state->cgcdiv / 16;
 710                 acni = acni * state->cgcdiv / 16;
 711                 acc = 0x80;
 712                 if (state->cgcdiv == 3)
 713                         acc |= 0x40;
 714         }
 715         if (state->apll)
 716                 acc |= 0x08;
 717
 718         saa711x_write(client, R_38_CLK_RATIO_AMXCLK_TO_ASCLK, 0x03);
 719         saa711x_write(client, R_39_CLK_RATIO_ASCLK_TO_ALRCLK, 0x10);
 720         saa711x_write(client, R_3A_AUD_CLK_GEN_BASIC_SETUP, acc);
 721
 722         saa711x_write(client, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD, acpf & 0xff);
 723         saa711x_write(client, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+1,
 724                                                         (acpf >> 8) & 0xff);
 725         saa711x_write(client, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+2,
 726                                                         (acpf >> 16) & 0x03);
 727
 728         saa711x_write(client, R_34_AUD_MAST_CLK_NOMINAL_INC, acni & 0xff);
 729         saa711x_write(client, R_34_AUD_MAST_CLK_NOMINAL_INC+1, (acni >> 8) & 0xff);
 730         saa711x_write(client, R_34_AUD_MAST_CLK_NOMINAL_INC+2, (acni >> 16) & 0x3f);
 731         state->audclk_freq = freq;
 732         return 0;
 733 }
 734
 735 static int saa711x_set_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl)
 736 {
 737         struct saa711x_state *state = i2c_get_clientdata(client);
 738
 739         switch (ctrl->id) {
 740         case V4L2_CID_BRIGHTNESS:
 741                 if (ctrl->value < 0 || ctrl->value > 255) {
 742                         v4l_err(client, "invalid brightness setting %d\n", ctrl->value);
 743                         return -ERANGE;
 744                 }
 745
 746                 state->bright = ctrl->value;
 747                 saa711x_write(client, R_0A_LUMA_BRIGHT_CNTL, state->bright);
 748                 break;
 749
 750         case V4L2_CID_CONTRAST:
 751                 if (ctrl->value < 0 || ctrl->value > 127) {
 752                         v4l_err(client, "invalid contrast setting %d\n", ctrl->value);
 753                         return -ERANGE;
 754                 }
 755
 756                 state->contrast = ctrl->value;
 757                 saa711x_write(client, R_0B_LUMA_CONTRAST_CNTL, state->contrast);
 758                 break;
 759
 760         case V4L2_CID_SATURATION:
 761                 if (ctrl->value < 0 || ctrl->value > 127) {
 762                         v4l_err(client, "invalid saturation setting %d\n", ctrl->value);
 763                         return -ERANGE;
 764                 }
 765
 766                 state->sat = ctrl->value;
 767                 saa711x_write(client, R_0C_CHROMA_SAT_CNTL, state->sat);
 768                 break;
 769
 770         case V4L2_CID_HUE:
 771                 if (ctrl->value < -127 || ctrl->value > 127) {
 772                         v4l_err(client, "invalid hue setting %d\n", ctrl->value);
 773                         return -ERANGE;
 774                 }
 775
 776                 state->hue = ctrl->value;
 777                 saa711x_write(client, R_0D_CHROMA_HUE_CNTL, state->hue);
 778                 break;
 779
 780         default:
 781                 return -EINVAL;
 782         }
 783
 784         return 0;
 785 }
 786
 787 static int saa711x_get_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl)
 788 {
 789         struct saa711x_state *state = i2c_get_clientdata(client);
 790
 791         switch (ctrl->id) {
 792         case V4L2_CID_BRIGHTNESS:
 793                 ctrl->value = state->bright;
 794                 break;
 795         case V4L2_CID_CONTRAST:
 796                 ctrl->value = state->contrast;
 797                 break;
 798         case V4L2_CID_SATURATION:
 799                 ctrl->value = state->sat;
 800                 break;
 801         case V4L2_CID_HUE:
 802                 ctrl->value = state->hue;
 803                 break;
 804         default:
 805                 return -EINVAL;
 806         }
 807
 808         return 0;
 809 }
 810
 811 static int saa711x_set_size(struct i2c_client *client, int width, int height)
 812 {
 813         struct saa711x_state *state = i2c_get_clientdata(client);
 814         int HPSC, HFSC;
 815         int VSCY;
 816         int res;
 817         int is_50hz = state->std & V4L2_STD_625_50;
 818         int Vsrc = is_50hz ? 576 : 480;
 819
 820         v4l_dbg(1, debug, client, "decoder set size to %ix%i\n",width,height);
 821
 822         /* FIXME need better bounds checking here */
 823         if ((width < 1) || (width > 1440))
 824                 return -EINVAL;
 825         if ((height < 1) || (height > Vsrc))
 826                 return -EINVAL;
 827
 828         if (!saa711x_has_reg(state->ident,R_D0_B_HORIZ_PRESCALING)) {
 829                 /* Decoder only supports 720 columns and 480 or 576 lines */
 830                 if (width != 720)
 831                         return -EINVAL;
 832                 if (height != Vsrc)
 833                         return -EINVAL;
 834         }
 835
 836         state->width = width;
 837         state->height = height;
 838
 839         if (!saa711x_has_reg(state->ident, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH))
 840                 return 0;
 841
 842         /* probably have a valid size, let's set it */
 843         /* Set output width/height */
 844         /* width */
 845
 846         saa711x_write(client, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH,
 847                                         (u8) (width & 0xff));
 848         saa711x_write(client, R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB,
 849                                         (u8) ((width >> 8) & 0xff));
 850
 851         /* Vertical Scaling uses height/2 */
 852         res=height/2;
 853
 854         /* On 60Hz, it is using a higher Vertical Output Size */
 855         if (!is_50hz)
 856                 res += (VRES_60HZ - 480) >> 1;
 857
 858                 /* height */
 859         saa711x_write(client, R_CE_B_VERT_OUTPUT_WINDOW_LENGTH,
 860                                         (u8) (res & 0xff));
 861         saa711x_write(client, R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB,
 862                                         (u8) ((res >> 8) & 0xff));
 863
 864         /* Scaling settings */
 865         /* Hprescaler is floor(inres/outres) */
 866         HPSC = (int)(720 / width);
 867         /* 0 is not allowed (div. by zero) */
 868         HPSC = HPSC ? HPSC : 1;
 869         HFSC = (int)((1024 * 720) / (HPSC * width));
 870         /* FIXME hardcodes to "Task B"
 871          * write H prescaler integer */
 872         saa711x_write(client, R_D0_B_HORIZ_PRESCALING,
 873                                 (u8) (HPSC & 0x3f));
 874
 875         v4l_dbg(1, debug, client, "Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC);
 876         /* write H fine-scaling (luminance) */
 877         saa711x_write(client, R_D8_B_HORIZ_LUMA_SCALING_INC,
 878                                 (u8) (HFSC & 0xff));
 879         saa711x_write(client, R_D9_B_HORIZ_LUMA_SCALING_INC_MSB,
 880                                 (u8) ((HFSC >> 8) & 0xff));
 881         /* write H fine-scaling (chrominance)
 882          * must be lum/2, so i'll just bitshift :) */
 883         saa711x_write(client, R_DC_B_HORIZ_CHROMA_SCALING,
 884                                 (u8) ((HFSC >> 1) & 0xff));
 885         saa711x_write(client, R_DD_B_HORIZ_CHROMA_SCALING_MSB,
 886                                 (u8) ((HFSC >> 9) & 0xff));
 887
 888         VSCY = (int)((1024 * Vsrc) / height);
 889         v4l_dbg(1, debug, client, "Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY);
 890
 891         /* Correct Contrast and Luminance */
 892         saa711x_write(client, R_D5_B_LUMA_CONTRAST_CNTL,
 893                                         (u8) (64 * 1024 / VSCY));
 894         saa711x_write(client, R_D6_B_CHROMA_SATURATION_CNTL,
 895                                         (u8) (64 * 1024 / VSCY));
 896
 897                 /* write V fine-scaling (luminance) */
 898         saa711x_write(client, R_E0_B_VERT_LUMA_SCALING_INC,
 899                                         (u8) (VSCY & 0xff));
 900         saa711x_write(client, R_E1_B_VERT_LUMA_SCALING_INC_MSB,
 901                                         (u8) ((VSCY >> 8) & 0xff));
 902                 /* write V fine-scaling (chrominance) */
 903         saa711x_write(client, R_E2_B_VERT_CHROMA_SCALING_INC,
 904                                         (u8) (VSCY & 0xff));
 905         saa711x_write(client, R_E3_B_VERT_CHROMA_SCALING_INC_MSB,
 906                                         (u8) ((VSCY >> 8) & 0xff));
 907
 908         saa711x_writeregs(client, saa7115_cfg_reset_scaler);
 909
 910         /* Activates task "B" */
 911         saa711x_write(client, R_80_GLOBAL_CNTL_1,
 912                                 saa711x_read(client,R_80_GLOBAL_CNTL_1) | 0x20);
 913
 914         return 0;
 915 }
 916
 917 static void saa711x_set_v4lstd(struct i2c_client *client, v4l2_std_id std)
 918 {
 919         struct saa711x_state *state = i2c_get_clientdata(client);
 920
 921         /* Prevent unnecessary standard changes. During a standard
 922            change the I-Port is temporarily disabled. Any devices
 923            reading from that port can get confused.
 924            Note that VIDIOC_S_STD is also used to switch from
 925            radio to TV mode, so if a VIDIOC_S_STD is broadcast to
 926            all I2C devices then you do not want to have an unwanted
 927            side-effect here. */
 928         if (std == state->std)
 929                 return;
 930
 931         state->std = std;
 932
 933         // This works for NTSC-M, SECAM-L and the 50Hz PAL variants.
 934         if (std & V4L2_STD_525_60) {
 935                 v4l_dbg(1, debug, client, "decoder set standard 60 Hz\n");
 936                 saa711x_writeregs(client, saa7115_cfg_60hz_video);
 937                 saa711x_set_size(client, 720, 480);
 938         } else {
 939                 v4l_dbg(1, debug, client, "decoder set standard 50 Hz\n");
 940                 saa711x_writeregs(client, saa7115_cfg_50hz_video);
 941                 saa711x_set_size(client, 720, 576);
 942         }
 943
 944         /* Register 0E - Bits D6-D4 on NO-AUTO mode
 945                 (SAA7111 and SAA7113 doesn't have auto mode)
 946             50 Hz / 625 lines           60 Hz / 525 lines
 947         000 PAL BGDHI (4.43Mhz)         NTSC M (3.58MHz)
 948         001 NTSC 4.43 (50 Hz)           PAL 4.43 (60 Hz)
 949         010 Combination-PAL N (3.58MHz) NTSC 4.43 (60 Hz)
 950         011 NTSC N (3.58MHz)            PAL M (3.58MHz)
 951         100 reserved                    NTSC-Japan (3.58MHz)
 952         */
 953         if (state->ident == V4L2_IDENT_SAA7111 ||
 954             state->ident == V4L2_IDENT_SAA7113) {
 955                 u8 reg = saa711x_read(client, R_0E_CHROMA_CNTL_1) & 0x8f;
 956
 957                 if (std == V4L2_STD_PAL_M) {
 958                         reg |= 0x30;
 959                 } else if (std == V4L2_STD_PAL_Nc) {
 960                         reg |= 0x20;
 961                 } else if (std == V4L2_STD_PAL_60) {
 962                         reg |= 0x10;
 963                 } else if (std == V4L2_STD_NTSC_M_JP) {
 964                         reg |= 0x40;
 965                 } else if (std & V4L2_STD_SECAM) {
 966                         reg |= 0x50;
 967                 }
 968                 saa711x_write(client, R_0E_CHROMA_CNTL_1, reg);
 969         } else {
 970                 /* restart task B if needed */
 971                 int taskb = saa711x_read(client, R_80_GLOBAL_CNTL_1) & 0x10;
 972
 973                 if (taskb && state->ident == V4L2_IDENT_SAA7114) {
 974                         saa711x_writeregs(client, saa7115_cfg_vbi_on);
 975                 }
 976
 977                 /* switch audio mode too! */
 978                 saa711x_set_audio_clock_freq(client, state->audclk_freq);
 979         }
 980 }
 981
 982 static v4l2_std_id saa711x_get_v4lstd(struct i2c_client *client)
 983 {
 984         struct saa711x_state *state = i2c_get_clientdata(client);
 985
 986         return state->std;
 987 }
 988
 989 static void saa711x_log_status(struct i2c_client *client)
 990 {
 991         struct saa711x_state *state = i2c_get_clientdata(client);
 992         int reg1e, reg1f;
 993         int signalOk;
 994         int vcr;
 995
 996         v4l_info(client, "Audio frequency: %d Hz\n", state->audclk_freq);
 997         if (state->ident != V4L2_IDENT_SAA7115) {
 998                 /* status for the saa7114 */
 999                 reg1f = saa711x_read(client, R_1F_STATUS_BYTE_2_VD_DEC);
1000                 signalOk = (reg1f & 0xc1) == 0x81;
1001                 v4l_info(client, "Video signal:    %s\n", signalOk ? "ok" : "bad");
1002                 v4l_info(client, "Frequency:       %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz");
1003                 return;
1004         }
1005
1006         /* status for the saa7115 */
1007         reg1e = saa711x_read(client, R_1E_STATUS_BYTE_1_VD_DEC);
1008         reg1f = saa711x_read(client, R_1F_STATUS_BYTE_2_VD_DEC);
1009
1010         signalOk = (reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80;
1011         vcr = !(reg1f & 0x10);
1012
1013         if (state->input >= 6) {
1014                 v4l_info(client, "Input:           S-Video %d\n", state->input - 6);
1015         } else {
1016                 v4l_info(client, "Input:           Composite %d\n", state->input);
1017         }
1018         v4l_info(client, "Video signal:    %s\n", signalOk ? (vcr ? "VCR" : "broadcast/DVD") : "bad");
1019         v4l_info(client, "Frequency:       %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz");
1020
1021         switch (reg1e & 0x03) {
1022                 case 1:
1023                         v4l_info(client, "Detected format: NTSC\n");
1024                         break;
1025                 case 2:
1026                         v4l_info(client, "Detected format: PAL\n");
1027                         break;
1028                 case 3:
1029                         v4l_info(client, "Detected format: SECAM\n");
1030                         break;
1031                 default:
1032                         v4l_info(client, "Detected format: BW/No color\n");
1033                         break;
1034         }
1035         v4l_info(client, "Width, Height:   %d, %d\n", state->width, state->height);
1036 }
1037
1038 /* setup the sliced VBI lcr registers according to the sliced VBI format */
1039 static void saa711x_set_lcr(struct i2c_client *client, struct v4l2_sliced_vbi_format *fmt)
1040 {
1041         struct saa711x_state *state = i2c_get_clientdata(client);
1042         int is_50hz = (state->std & V4L2_STD_625_50);
1043         u8 lcr[24];
1044         int i, x;
1045
1046 #if 1
1047         /* saa7113/7114/7118 VBI support are experimental */
1048         if (!saa711x_has_reg(state->ident,R_41_LCR_BASE))
1049                 return;
1050
1051 #else
1052         /* SAA7113 and SAA7118 also should support VBI - Need testing */
1053         if (state->ident != V4L2_IDENT_SAA7115)
1054                 return;
1055 #endif
1056
1057         for (i = 0; i <= 23; i++)
1058                 lcr[i] = 0xff;
1059
1060         if (fmt->service_set == 0) {
1061                 /* raw VBI */
1062                 if (is_50hz)
1063                         for (i = 6; i <= 23; i++)
1064                                 lcr[i] = 0xdd;
1065                 else
1066                         for (i = 10; i <= 21; i++)
1067                                 lcr[i] = 0xdd;
1068         } else {
1069                 /* sliced VBI */
1070                 /* first clear lines that cannot be captured */
1071                 if (is_50hz) {
1072                         for (i = 0; i <= 5; i++)
1073                                 fmt->service_lines[0][i] =
1074                                         fmt->service_lines[1][i] = 0;
1075                 }
1076                 else {
1077                         for (i = 0; i <= 9; i++)
1078                                 fmt->service_lines[0][i] =
1079                                         fmt->service_lines[1][i] = 0;
1080                         for (i = 22; i <= 23; i++)
1081                                 fmt->service_lines[0][i] =
1082                                         fmt->service_lines[1][i] = 0;
1083                 }
1084
1085                 /* Now set the lcr values according to the specified service */
1086                 for (i = 6; i <= 23; i++) {
1087                         lcr[i] = 0;
1088                         for (x = 0; x <= 1; x++) {
1089                                 switch (fmt->service_lines[1-x][i]) {
1090                                         case 0:
1091                                                 lcr[i] |= 0xf << (4 * x);
1092                                                 break;
1093                                         case V4L2_SLICED_TELETEXT_B:
1094                                                 lcr[i] |= 1 << (4 * x);
1095                                                 break;
1096                                         case V4L2_SLICED_CAPTION_525:
1097                                                 lcr[i] |= 4 << (4 * x);
1098                                                 break;
1099                                         case V4L2_SLICED_WSS_625:
1100                                                 lcr[i] |= 5 << (4 * x);
1101                                                 break;
1102                                         case V4L2_SLICED_VPS:
1103                                                 lcr[i] |= 7 << (4 * x);
1104                                                 break;
1105                                 }
1106                         }
1107                 }
1108         }
1109
1110         /* write the lcr registers */
1111         for (i = 2; i <= 23; i++) {
1112                 saa711x_write(client, i - 2 + R_41_LCR_BASE, lcr[i]);
1113         }
1114
1115         /* enable/disable raw VBI capturing */
1116         saa711x_writeregs(client, fmt->service_set == 0 ?
1117                                 saa7115_cfg_vbi_on :
1118                                 saa7115_cfg_vbi_off);
1119 }
1120
1121 static int saa711x_get_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt)
1122 {
1123         static u16 lcr2vbi[] = {
1124                 0, V4L2_SLICED_TELETEXT_B, 0,   /* 1 */
1125                 0, V4L2_SLICED_CAPTION_525,     /* 4 */
1126                 V4L2_SLICED_WSS_625, 0,         /* 5 */
1127                 V4L2_SLICED_VPS, 0, 0, 0, 0,    /* 7 */
1128                 0, 0, 0, 0
1129         };
1130         struct v4l2_sliced_vbi_format *sliced = &fmt->fmt.sliced;
1131         int i;
1132
1133         if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
1134                 return -EINVAL;
1135         memset(sliced, 0, sizeof(*sliced));
1136         /* done if using raw VBI */
1137         if (saa711x_read(client, R_80_GLOBAL_CNTL_1) & 0x10)
1138                 return 0;
1139         for (i = 2; i <= 23; i++) {
1140                 u8 v = saa711x_read(client, i - 2 + R_41_LCR_BASE);
1141
1142                 sliced->service_lines[0][i] = lcr2vbi[v >> 4];
1143                 sliced->service_lines[1][i] = lcr2vbi[v & 0xf];
1144                 sliced->service_set |=
1145                         sliced->service_lines[0][i] | sliced->service_lines[1][i];
1146         }
1147         return 0;
1148 }
1149
1150 static int saa711x_set_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt)
1151 {
1152         if (fmt->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) {
1153                 saa711x_set_lcr(client, &fmt->fmt.sliced);
1154                 return 0;
1155         }
1156         if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
1157                 return -EINVAL;
1158
1159         return saa711x_set_size(client,fmt->fmt.pix.width,fmt->fmt.pix.height);
1160 }
1161
1162 /* Decode the sliced VBI data stream as created by the saa7115.
1163    The format is described in the saa7115 datasheet in Tables 25 and 26
1164    and in Figure 33.
1165    The current implementation uses SAV/EAV codes and not the ancillary data
1166    headers. The vbi->p pointer points to the R_5E_SDID byte right after the SAV
1167    code. */
1168 static void saa711x_decode_vbi_line(struct i2c_client *client,
1169                                     struct v4l2_decode_vbi_line *vbi)
1170 {
1171         static const char vbi_no_data_pattern[] = {
1172                 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0
1173         };
1174         struct saa711x_state *state = i2c_get_clientdata(client);
1175         u8 *p = vbi->p;
1176         u32 wss;
1177         int id1, id2;   /* the ID1 and ID2 bytes from the internal header */
1178
1179         vbi->type = 0;  /* mark result as a failure */
1180         id1 = p[2];
1181         id2 = p[3];
1182         /* Note: the field bit is inverted for 60 Hz video */
1183         if (state->std & V4L2_STD_525_60)
1184                 id1 ^= 0x40;
1185
1186         /* Skip internal header, p now points to the start of the payload */
1187         p += 4;
1188         vbi->p = p;
1189
1190         /* calculate field and line number of the VBI packet (1-23) */
1191         vbi->is_second_field = ((id1 & 0x40) != 0);
1192         vbi->line = (id1 & 0x3f) << 3;
1193         vbi->line |= (id2 & 0x70) >> 4;
1194
1195         /* Obtain data type */
1196         id2 &= 0xf;
1197
1198         /* If the VBI slicer does not detect any signal it will fill up
1199            the payload buffer with 0xa0 bytes. */
1200         if (!memcmp(p, vbi_no_data_pattern, sizeof(vbi_no_data_pattern)))
1201                 return;
1202
1203         /* decode payloads */
1204         switch (id2) {
1205         case 1:
1206                 vbi->type = V4L2_SLICED_TELETEXT_B;
1207                 break;
1208         case 4:
1209                 if (!saa711x_odd_parity(p[0]) || !saa711x_odd_parity(p[1]))
1210                         return;
1211                 vbi->type = V4L2_SLICED_CAPTION_525;
1212                 break;
1213         case 5:
1214                 wss = saa711x_decode_wss(p);
1215                 if (wss == -1)
1216                         return;
1217                 p[0] = wss & 0xff;
1218                 p[1] = wss >> 8;
1219                 vbi->type = V4L2_SLICED_WSS_625;
1220                 break;
1221         case 7:
1222                 if (saa711x_decode_vps(p, p) != 0)
1223                         return;
1224                 vbi->type = V4L2_SLICED_VPS;
1225                 break;
1226         default:
1227                 return;
1228         }
1229 }
1230
1231 /* ============ SAA7115 AUDIO settings (end) ============= */
1232
1233 static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *arg)
1234 {
1235         struct saa711x_state *state = i2c_get_clientdata(client);
1236
1237         /* ioctls to allow direct access to the saa7115 registers for testing */
1238         switch (cmd) {
1239         case VIDIOC_S_FMT:
1240                 return saa711x_set_v4lfmt(client, (struct v4l2_format *)arg);
1241
1242         case VIDIOC_G_FMT:
1243                 return saa711x_get_v4lfmt(client, (struct v4l2_format *)arg);
1244
1245         case VIDIOC_INT_AUDIO_CLOCK_FREQ:
1246                 return saa711x_set_audio_clock_freq(client, *(u32 *)arg);
1247
1248         case VIDIOC_G_TUNER:
1249         {
1250                 struct v4l2_tuner *vt = arg;
1251                 int status;
1252
1253                 if (state->radio)
1254                         break;
1255                 status = saa711x_read(client, R_1F_STATUS_BYTE_2_VD_DEC);
1256
1257                 v4l_dbg(1, debug, client, "status: 0x%02x\n", status);
1258                 vt->signal = ((status & (1 << 6)) == 0) ? 0xffff : 0x0;
1259                 break;
1260         }
1261
1262         case VIDIOC_LOG_STATUS:
1263                 saa711x_log_status(client);
1264                 break;
1265
1266         case VIDIOC_G_CTRL:
1267                 return saa711x_get_v4lctrl(client, (struct v4l2_control *)arg);
1268
1269         case VIDIOC_S_CTRL:
1270                 return saa711x_set_v4lctrl(client, (struct v4l2_control *)arg);
1271
1272         case VIDIOC_QUERYCTRL:
1273         {
1274                 struct v4l2_queryctrl *qc = arg;
1275
1276                 switch (qc->id) {
1277                         case V4L2_CID_BRIGHTNESS:
1278                         case V4L2_CID_CONTRAST:
1279                         case V4L2_CID_SATURATION:
1280                         case V4L2_CID_HUE:
1281                                 return v4l2_ctrl_query_fill_std(qc);
1282                         default:
1283                                 return -EINVAL;
1284                 }
1285         }
1286
1287         case VIDIOC_G_STD:
1288                 *(v4l2_std_id *)arg = saa711x_get_v4lstd(client);
1289                 break;
1290
1291         case VIDIOC_S_STD:
1292                 state->radio = 0;
1293                 saa711x_set_v4lstd(client, *(v4l2_std_id *)arg);
1294                 break;
1295
1296         case AUDC_SET_RADIO:
1297                 state->radio = 1;
1298                 break;
1299
1300         case VIDIOC_INT_G_VIDEO_ROUTING:
1301         {
1302                 struct v4l2_routing *route = arg;
1303
1304                 route->input = state->input;
1305                 route->output = state->output;
1306                 break;
1307         }
1308
1309         case VIDIOC_INT_S_VIDEO_ROUTING:
1310         {
1311                 struct v4l2_routing *route = arg;
1312
1313                 v4l_dbg(1, debug, client, "decoder set input %d output %d\n", route->input, route->output);
1314                 /* saa7113 does not have these inputs */
1315                 if (state->ident == V4L2_IDENT_SAA7113 &&
1316                     (route->input == SAA7115_COMPOSITE4 ||
1317                      route->input == SAA7115_COMPOSITE5)) {
1318                         return -EINVAL;
1319                 }
1320                 if (route->input > SAA7115_SVIDEO3)
1321                         return -EINVAL;
1322                 if (route->output > SAA7115_IPORT_ON)
1323                         return -EINVAL;
1324                 if (state->input == route->input && state->output == route->output)
1325                         break;
1326                 v4l_dbg(1, debug, client, "now setting %s input %s output\n",
1327                         (route->input >= SAA7115_SVIDEO0) ? "S-Video" : "Composite", (route->output == SAA7115_IPORT_ON) ? "iport on" : "iport off");
1328                 state->input = route->input;
1329
1330                 /* select mode */
1331                 saa711x_write(client, R_02_INPUT_CNTL_1,
1332                               (saa711x_read(client, R_02_INPUT_CNTL_1) & 0xf0) |
1333                                state->input);
1334
1335                 /* bypass chrominance trap for S-Video modes */
1336                 saa711x_write(client, R_09_LUMA_CNTL,
1337                               (saa711x_read(client, R_09_LUMA_CNTL) & 0x7f) |
1338                                (state->input >= SAA7115_SVIDEO0 ? 0x80 : 0x0));
1339
1340                 state->output = route->output;
1341                 if (state->ident == V4L2_IDENT_SAA7114 ||
1342                         state->ident == V4L2_IDENT_SAA7115) {
1343                         saa711x_write(client, R_83_X_PORT_I_O_ENA_AND_OUT_CLK,
1344                               (saa711x_read(client, R_83_X_PORT_I_O_ENA_AND_OUT_CLK) & 0xfe) |
1345                                (state->output & 0x01));
1346                 }
1347                 break;
1348         }
1349
1350         case VIDIOC_STREAMON:
1351         case VIDIOC_STREAMOFF:
1352                 v4l_dbg(1, debug, client, "%s output\n",
1353                         (cmd == VIDIOC_STREAMON) ? "enable" : "disable");
1354
1355                 if (state->enable != (cmd == VIDIOC_STREAMON)) {
1356                         state->enable = (cmd == VIDIOC_STREAMON);
1357                         saa711x_write(client,
1358                                 R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED,
1359                                 state->enable);
1360                 }
1361                 break;
1362
1363         case VIDIOC_INT_S_CRYSTAL_FREQ:
1364         {
1365                 struct v4l2_crystal_freq *freq = arg;
1366
1367                 if (freq->freq != SAA7115_FREQ_32_11_MHZ &&
1368                     freq->freq != SAA7115_FREQ_24_576_MHZ)
1369                         return -EINVAL;
1370                 state->crystal_freq = freq->freq;
1371                 state->cgcdiv = (freq->flags & SAA7115_FREQ_FL_CGCDIV) ? 3 : 4;
1372                 state->ucgc = (freq->flags & SAA7115_FREQ_FL_UCGC) ? 1 : 0;
1373                 state->apll = (freq->flags & SAA7115_FREQ_FL_APLL) ? 1 : 0;
1374                 saa711x_set_audio_clock_freq(client, state->audclk_freq);
1375                 break;
1376         }
1377
1378         case VIDIOC_INT_DECODE_VBI_LINE:
1379                 saa711x_decode_vbi_line(client, arg);
1380                 break;
1381
1382         case VIDIOC_INT_RESET:
1383                 v4l_dbg(1, debug, client, "decoder RESET\n");
1384                 saa711x_writeregs(client, saa7115_cfg_reset_scaler);
1385                 break;
1386
1387         case VIDIOC_INT_G_VBI_DATA:
1388         {
1389                 struct v4l2_sliced_vbi_data *data = arg;
1390
1391                 /* Note: the internal field ID is inverted for NTSC,
1392                    so data->field 0 maps to the saa7115 even field,
1393                    whereas for PAL it maps to the saa7115 odd field. */
1394                 switch (data->id) {
1395                 case V4L2_SLICED_WSS_625:
1396                         if (saa711x_read(client, 0x6b) & 0xc0)
1397                                 return -EIO;
1398                         data->data[0] = saa711x_read(client, 0x6c);
1399                         data->data[1] = saa711x_read(client, 0x6d);
1400                         return 0;
1401                 case V4L2_SLICED_CAPTION_525:
1402                         if (data->field == 0) {
1403                                 /* CC */
1404                                 if (saa711x_read(client, 0x66) & 0x30)
1405                                         return -EIO;
1406                                 data->data[0] = saa711x_read(client, 0x69);
1407                                 data->data[1] = saa711x_read(client, 0x6a);
1408                                 return 0;
1409                         }
1410                         /* XDS */
1411                         if (saa711x_read(client, 0x66) & 0xc0)
1412                                 return -EIO;
1413                         data->data[0] = saa711x_read(client, 0x67);
1414                         data->data[1] = saa711x_read(client, 0x68);
1415                         return 0;
1416                 default:
1417                         return -EINVAL;
1418                 }
1419                 break;
1420         }
1421
1422 #ifdef CONFIG_VIDEO_ADV_DEBUG
1423         case VIDIOC_DBG_G_REGISTER:
1424         case VIDIOC_DBG_S_REGISTER:
1425         {
1426                 struct v4l2_register *reg = arg;
1427
1428                 if (!v4l2_chip_match_i2c_client(client, reg->match_type, reg->match_chip))
1429                         return -EINVAL;
1430                 if (!capable(CAP_SYS_ADMIN))
1431                         return -EPERM;
1432                 if (cmd == VIDIOC_DBG_G_REGISTER)
1433                         reg->val = saa711x_read(client, reg->reg & 0xff);
1434                 else
1435                         saa711x_write(client, reg->reg & 0xff, reg->val & 0xff);
1436                 break;
1437         }
1438 #endif
1439
1440         case VIDIOC_G_CHIP_IDENT:
1441                 return v4l2_chip_ident_i2c_client(client, arg, state->ident, 0);
1442
1443         default:
1444                 return -EINVAL;
1445         }
1446
1447         return 0;
1448 }
1449
1450 /* ----------------------------------------------------------------------- */
1451
1452 static int saa7115_probe(struct i2c_client *client,
1453                          const struct i2c_device_id *id)
1454 {
1455         struct saa711x_state *state;
1456         int     i;
1457         char    name[17];
1458         char chip_id;
1459         int autodetect = !id || id->driver_data == 1;
1460
1461         /* Check if the adapter supports the needed features */
1462         if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
1463                 return -EIO;
1464
1465         for (i = 0; i < 0x0f; i++) {
1466                 saa711x_write(client, 0, i);
1467                 name[i] = (saa711x_read(client, 0) & 0x0f) + '0';
1468                 if (name[i] > '9')
1469                         name[i] += 'a' - '9' - 1;
1470         }
1471         name[i] = '\0';
1472
1473         chip_id = name[5];
1474
1475         /* Check whether this chip is part of the saa711x series */
1476         if (memcmp(name, "1f711", 5)) {
1477                 v4l_dbg(1, debug, client, "chip found @ 0x%x (ID %s) does not match a known saa711x chip.\n",
1478                         client->addr << 1, name);
1479                 return -ENODEV;
1480         }
1481
1482         /* Safety check */
1483         if (!autodetect && id->name[6] != chip_id) {
1484                 v4l_warn(client, "found saa711%c while %s was expected\n",
1485                          chip_id, id->name);
1486         }
1487         snprintf(client->name, sizeof(client->name), "saa711%c", chip_id);
1488         v4l_info(client, "saa711%c found (%s) @ 0x%x (%s)\n", chip_id, name,
1489                  client->addr << 1, client->adapter->name);
1490
1491         state = kzalloc(sizeof(struct saa711x_state), GFP_KERNEL);
1492         if (state == NULL)
1493                 return -ENOMEM;
1494         i2c_set_clientdata(client, state);
1495         state->input = -1;
1496         state->output = SAA7115_IPORT_ON;
1497         state->enable = 1;
1498         state->radio = 0;
1499         state->bright = 128;
1500         state->contrast = 64;
1501         state->hue = 0;
1502         state->sat = 64;
1503         switch (chip_id) {
1504         case '1':
1505                 state->ident = V4L2_IDENT_SAA7111;
1506                 break;
1507         case '3':
1508                 state->ident = V4L2_IDENT_SAA7113;
1509                 break;
1510         case '4':
1511                 state->ident = V4L2_IDENT_SAA7114;
1512                 break;
1513         case '5':
1514                 state->ident = V4L2_IDENT_SAA7115;
1515                 break;
1516         case '8':
1517                 state->ident = V4L2_IDENT_SAA7118;
1518                 break;
1519         default:
1520                 state->ident = V4L2_IDENT_SAA7111;
1521                 v4l_info(client, "WARNING: Chip is not known - Falling back to saa7111\n");
1522
1523         }
1524
1525         state->audclk_freq = 48000;
1526
1527         v4l_dbg(1, debug, client, "writing init values\n");
1528
1529         /* init to 60hz/48khz */
1530         state->crystal_freq = SAA7115_FREQ_24_576_MHZ;
1531         switch (state->ident) {
1532         case V4L2_IDENT_SAA7111:
1533                 saa711x_writeregs(client, saa7111_init);
1534                 break;
1535         case V4L2_IDENT_SAA7113:
1536                 saa711x_writeregs(client, saa7113_init);
1537                 break;
1538         default:
1539                 state->crystal_freq = SAA7115_FREQ_32_11_MHZ;
1540                 saa711x_writeregs(client, saa7115_init_auto_input);
1541         }
1542         saa711x_writeregs(client, saa7115_init_misc);
1543         saa711x_set_v4lstd(client, V4L2_STD_NTSC);
1544
1545         v4l_dbg(1, debug, client, "status: (1E) 0x%02x, (1F) 0x%02x\n",
1546                 saa711x_read(client, R_1E_STATUS_BYTE_1_VD_DEC), saa711x_read(client, R_1F_STATUS_BYTE_2_VD_DEC));
1547         return 0;
1548 }
1549
1550 /* ----------------------------------------------------------------------- */
1551
1552 static int saa7115_remove(struct i2c_client *client)
1553 {
1554         kfree(i2c_get_clientdata(client));
1555         return 0;
1556 }
1557
1558 static const struct i2c_device_id saa7115_id[] = {
1559         { "saa7115_auto", 1 }, /* autodetect */
1560         { "saa7111", 0 },
1561         { "saa7113", 0 },
1562         { "saa7114", 0 },
1563         { "saa7115", 0 },
1564         { "saa7118", 0 },
1565         { }
1566 };
1567 MODULE_DEVICE_TABLE(i2c, saa7115_id);
1568
1569 static struct v4l2_i2c_driver_data v4l2_i2c_data = {
1570         .name = "saa7115",
1571         .driverid = I2C_DRIVERID_SAA711X,
1572         .command = saa7115_command,
1573         .probe = saa7115_probe,
1574         .remove = saa7115_remove,
1575         .legacy_class = I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL,
1576         .id_table = saa7115_id,
1577 };